HP ProLiant BL465c Server Blade
User Guide
September 2006 (First Edition)
Part Number 418191-001
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Component identification............................................................................................................... 6
System board components.......................................................................................................................... 9
Power up the server blade........................................................................................................................ 12
Overview............................................................................................................................................... 15
Installing server blade options................................................................................................................... 15
Installing interconnect modules.................................................................................................................. 16
Connecting to the network........................................................................................................................ 16
Completing the configuration.................................................................................................................... 18
Memory options...................................................................................................................................... 25
Advanced ECC memory................................................................................................................. 26
DIMM installation guidelines........................................................................................................... 26
Cabling..................................................................................................................................... 32
Accessing a server blade with local media devices............................................................................ 33
Software drivers and additional components..................................................................................... 35
Contents
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration tools.................................................................................................................................. 41
Array Configuration Utility.............................................................................................................. 42
Re-entering the server serial number and product ID........................................................................... 43
Integrated Lights-Out 2 technology................................................................................................... 44
HP Systems Insight Manager........................................................................................................... 45
HP Insight Diagnostics.................................................................................................................... 47
Remote support and analysis tools............................................................................................................. 48
HP Instant Support Enterprise Edition................................................................................................ 48
Open Services Event Manager........................................................................................................ 49
Operating system version support.................................................................................................... 50
Natural language search assistant................................................................................................... 50
Troubleshooting.......................................................................................................................... 51
Contents
4
Download from Www.Somanuals.com. All Manuals Search And Download.
POST error messages and beep codes....................................................................................................... 64
Introduction to POST error messages................................................................................................ 64
Regulatory compliance identification numbers............................................................................................. 67
Class B equipment......................................................................................................................... 68
Cables................................................................................................................................................... 69
Disposal of waste equipment by users in private households in the European Union......................................... 70
BSMI notice............................................................................................................................................ 70
Electrostatic discharge................................................................................................................. 73
Preventing electrostatic discharge.............................................................................................................. 73
Grounding methods to prevent electrostatic discharge.................................................................................. 73
Specifications............................................................................................................................. 74
Server blade specifications....................................................................................................................... 74
HP contact information............................................................................................................................. 75
Contents
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Component identification
In this section
Front panel components............................................................................................................................ 6
Front panel LEDs ...................................................................................................................................... 7
SAS and SATA hard drive LEDs ................................................................................................................. 8
SAS and SATA hard drive LED combinations............................................................................................... 8
System board components......................................................................................................................... 9
Local I/O cable ..................................................................................................................................... 11
Front panel components
Item
1
Description
Hard drive bay 1
Power On/Standby button
Local I/O connector*
Hard drive bay 2
Server blade handle
Release button
2
3
4
5
6
7
Serial label pull tab
* The I/O connector and the local I/O cable are for some server blade configuration and diagnostic procedures.
Component identification
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel LEDs
Item
Description
Status
1
UID LED
Blue = Identified
Blue flashing = Active remote management
Off = No active remote management
Green = Normal
2
3
4
5
Health LED
Flashing amber = Degraded condition
Flashing red = Critical condition
Green = Network linked
Green flashing = Network activity
Off = No link or activity
Green = Network linked
Green flashing = Network activity
Off = No link or activity
Green = On
NIC 1 LED*
NIC 2 LED*
System power LED
Amber = Standby (auxiliary power available)
Off = Off
* Actual NIC numbers depend on several factors, including the operating system installed on the server blade.
Component identification
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SAS and SATA hard drive LEDs
Item
1
Description
Fault/UID LED (amber/blue)
Online LED (green)
2
SAS and SATA hard drive LED combinations
Online/activity LED Fault/UID LED
(green) (amber/blue)
Interpretation
On, off, or flashing Alternating amber
and blue
The drive has failed, or a predictive failure alert has been
received for this drive; it also has been selected by a
management application.
On, off, or flashing Steadily blue
The drive is operating normally, and it has been selected by a
management application.
On
Amber, flashing
regularly (1 Hz)
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
On
Off
The drive is online, but it is not active currently.
Flashing regularly Amber, flashing
(1 Hz) regularly (1 Hz)
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is part of an array that is undergoing capacity
expansion or stripe migration, but a predictive failure alert has
been received for this drive. To minimize the risk of data loss, do
not replace the drive until the expansion or migration is
complete.
Flashing regularly Off
(1 Hz)
Do not remove the drive. Removing a drive may
terminate the current operation and cause data loss.
The drive is rebuilding, or it is part of an array that is undergoing
capacity expansion or stripe migration.
Flashing irregularly Amber, flashing
regularly (1 Hz)
The drive is active, but a predictive failure alert has been
received for this drive. Replace the drive as soon as possible.
Flashing irregularly Off
The drive is active, and it is operating normally.
Component identification
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Online/activity LED Fault/UID LED
Interpretation
(green)
(amber/blue)
Off
Steadily amber
A critical fault condition has been identified for this drive, and
the controller has placed it offline. Replace the drive as soon as
possible.
Off
Off
Amber, flashing
regularly (1 Hz)
A predictive failure alert has been received for this drive.
Replace the drive as soon as possible.
Off
The drive is offline, a spare, or not configured as part of an
array.
System board components
Item
1
Description
Bezel LED connector
2
Internal USB connector (under hard drive cage)
Processor socket 2
3
4
DIMM slots (Processor 1 memory banks A and B)
Processor socket 1 (populated)
Mezzanine connector 2 (Type I or Type II mezzanine)
System maintenance switch (SW1)
Enclosure connector
5
6
7
8
9
Battery
10
11
12
13
14
15
System board thumbscrew
Mezzanine connector 1 (Type I mezzanine only)
Embedded NICs (2)
DIMM slots (Processor 2 memory banks C and D)
HP Smart Array E200i cache module (under hard drive cage)
System board thumbscrew
Component identification
9
Download from Www.Somanuals.com. All Manuals Search And Download.
The symbols
correspond to the symbols located on the interconnect bays. For more information, see the
HP ProLiant BL465c Server Blade Installation Instructions that ship with the server blade.
Mezzanine connector definitions
Item
PCIe
Mezzanine connector 1
Mezzanine connector 2
x4, Type I mezzanine card only
x8, Type 1 or II mezzanine card
A PCIe x4 mezzanine connector supports x8 cards at up to x4 speeds. A PCIe x8 mezzanine connector supports x16
cards at up to x8 speeds.
DIMM slots
System maintenance switch
Position
Function
Default
Off
1*
2
iLO 2 security override
Configuration lock
Reserved
Off
3
Off
4
Reserved
Off
5*
6*
7
Password disabled
Reset configuration
Reserved
Off
Off
Off
8
Reserved
Off
*To access redundant ROM, set S1, S5, and S6 to ON.
Component identification 10
Download from Www.Somanuals.com. All Manuals Search And Download.
Local I/O cable
Item
Connector
Description
1
Server blade
For connecting to the local I/O cable
connector on the server blade front panel
2
3
4
Video
USB
For connecting a video monitor
For connecting up to two USB devices
Serial
For trained personnel to connect a null modem
serial cable and perform advanced diagnostic
procedures
Component identification 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Operations
In this section
Power up the server blade....................................................................................................................... 12
Power down the server blade .................................................................................................................. 12
Remove the server blade......................................................................................................................... 13
Remove the access panel ........................................................................................................................ 13
Install the access panel ........................................................................................................................... 14
Power up the server blade
The Onboard Administrator initiates an automatic power-up sequence when the server blade is installed.
If the default setting is changed, use one of the following methods to power up the server blade:
•
•
Use a virtual power button selection through iLO 2.
Press and release the Power On/Standby button.
When the server blade goes from the standby mode to the full power mode, the system power LED
changes from amber to green.
For more information about the Onboard Administrator, see the HP BladeSystem c7000 Enclosure Setup
and Installation Guide on the documentation CD.
Power down the server blade
Before powering down the server blade for any upgrade or maintenance procedures, perform a backup
of critical server data and programs.
Depending on the Onboard Administrator configuration, use one of the following methods to power down
the server blade:
•
•
•
Use a virtual power button selection through iLO 2.
This method initiates a controlled remote shutdown of applications and the OS before the server
blade enters standby mode.
Press and release the Power On/Standby button.
This method initiates a controlled shutdown of applications and the OS before the server blade
enters standby mode.
Press and hold the Power On/Standby button for more than 4 seconds to force the server blade to
shut down.
This method forces the server blade to enter standby mode without properly exiting applications and
the OS. It provides an emergency shutdown method in the event of a hung application.
IMPORTANT: When the server blade is in standby mode, auxiliary power is still being provided. To
remove all power from the server blade, remove the server blade from the enclosure.
Operations 12
Download from Www.Somanuals.com. All Manuals Search And Download.
After initiating a virtual power down command, be sure that the server blade goes into standby mode by
observing that the system power LED is amber.
Remove the server blade
To remove the component:
1. Identify the proper server blade.
3. Remove the server blade.
4. Place the server blade on a flat, level work surface.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade before
beginning any installation procedure. Improper grounding can cause ESD.
Remove the access panel
To remove the component:
3. Lift the access panel latch and slide the access panel to the rear.
4. Remove the access panel.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server blade before
beginning any installation procedure. Improper grounding can cause ESD.
Operations 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Install the access panel
1. Place the access panel on top of the server blade with the hood latch open. Allow the panel to
extend past the rear of the server blade approximately 0.8 cm (0.2 in).
2. Engage the anchoring pin with the corresponding hole in the latch.
3. Push down on the hood latch. The access panel slides to a closed position.
Operations 14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
In this section
Overview .............................................................................................................................................. 15
Installing an HP BladeSystem c-Class enclosure.......................................................................................... 15
Installing server blade options.................................................................................................................. 15
Installing interconnect modules................................................................................................................. 16
Connecting to the network....................................................................................................................... 16
Installing a server blade.......................................................................................................................... 17
Completing the configuration................................................................................................................... 18
Overview
Installation of a server blade requires the following steps:
1. Install and configure an HP BladeSystem c-Class enclosure.
2. Install any server blade options.
3. Install interconnect modules in the enclosure.
4. Connect the interconnect modules to the network.
5. Install a server blade.
6. Complete the server blade configuration.
Installing an HP BladeSystem c-Class enclosure
Before performing any server blade-specific procedures, install an HP BladeSystem c-Class enclosure.
The most current documentation for server blades and other HP BladeSystem components is available at
Documentation is also available in the following locations:
•
•
•
Documentation CD that ships with the enclosure
Installing server blade options
Before installing and initializing the server blade, install any server blade options, such as an additional
processor, hard drive, or mezzanine card. For server blade options installation information, see the HP
ProLiant BL465c Server Blade User Guide on the Documentation CD or on the HP website
Setup 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing interconnect modules
For specific steps to install interconnect modules, see the documentation that ships with the interconnect
module.
Interconnect bay numbering and device mapping
To support network connections for specific signals, install an interconnect module in the bay
corresponding to the embedded NIC or mezzanine signals.
Server blade signal
Interconnect bay
Interconnect bay labels
NIC 1 (Embedded)
1
NIC 2 (Embedded)
Mezzanine 1
2
3 and 4
5 and 6
7 and 8
Mezzanine 2
For detailed port mapping information, see the HP BladeSystem enclosure installation poster or the
HP BladeSystem enclosure setup and installation guide on the HP website
Connecting to the network
To connect the HP BladeSystem to a network, each enclosure must be configured with network
interconnect devices to manage signals between the server blades and the external network.
Two types of interconnect modules are available for HP BladeSystem c-Class enclosures: Pass-thru modules
and switch modules. For more information about interconnect module options, see the HP website
Setup 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing a server blade
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the
enclosure unless all hard drive and device bays are populated with either a component or a blank.
1. Remove the blank.
2. Remove the enclosure connector cover.
Setup 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Hardware options installation
In this section
Introduction ........................................................................................................................................... 19
Hard drive option................................................................................................................................... 19
Processor option..................................................................................................................................... 20
Memory options..................................................................................................................................... 25
Mezzanine card option........................................................................................................................... 27
Introduction
If more than one option is being installed, read the installation instructions for all the hardware options
and identify similar steps to streamline the installation process.
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To prevent damage to electrical components, properly ground the server before beginning any
installation procedure. Improper grounding can cause electrostatic discharge.
Hard drive option
The server blade supports up to two SAS or SATA drives.
CAUTION: To prevent improper cooling and thermal damage, do not operate the server blade or the
enclosure unless all hard drive and device bays are populated with either a component or a blank.
1. Remove the hard drive blank.
Hardware options installation 19
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Prepare the hard drive.
3. Install the hard drive.
4. Determine the status of the hard drive from the hot-plug hard drive LEDs ("SAS and SATA hard drive
Processor option
WARNING: To reduce the risk of personal injury from hot surfaces, allow the drives and
the internal system components to cool before touching them.
CAUTION: To avoid damage to the system board:
•
•
•
Do not touch the socket contacts.
Always install the processor socket cover after removing the processor from the socket.
Do not tilt or slide the processor when lowering the processor into the socket.
CAUTION: To avoid damage to the processor:
Hardware options installation 20
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Handle the processor only by the edges.
Do not touch the bottom of the processor, especially the contact area.
CAUTION: To prevent possible server malfunction and damage to the equipment, multiprocessor
configurations must contain processors with the same part number.
CAUTION: The heatsink thermal interface media is not reusable and must be replaced if the heatsink is
removed from the processor after it has been installed.
CAUTION: To prevent possible server blade overheating, always populate each processor socket with a
processor socket cover and a heatsink blank or a processor and a heatsink.
IMPORTANT: Processor socket 1 must always be populated. If processor socket 1 is empty, the server
blade does not power up.
To install a processor:
4. Remove the heatsink blank. Retain the heatsink blank for future use.
CAUTION: The pins on the processor socket are very fragile. Any damage to them may require replacing
the system board.
Hardware options installation 21
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Remove the processor socket protective cover. Retain the cover for future use.
CAUTION: Failure to completely open the processor retaining latch prevents the processor from seating
during installation, leading to hardware damage.
6. Open the processor retaining latch and the processor socket retaining bracket.
IMPORTANT: Be sure the processor remains inside the processor installation tool.
Hardware options installation 22
Download from Www.Somanuals.com. All Manuals Search And Download.
7. If the processor has separated from the installation tool, carefully re-insert the processor in the tool.
8. Align the processor installation tool with the socket and install the processor.
CAUTION: The processor is designed to fit one way into the socket. Use the alignment guides on the
processor and socket to properly align the processor with the socket.
Hardware options installation 23
Download from Www.Somanuals.com. All Manuals Search And Download.
9. Press down firmly until the processor installation tool clicks and separates from the processor, and
then remove the processor installation tool.
10. Close the processor retaining bracket and the processor retaining latch.
Hardware options installation 24
Download from Www.Somanuals.com. All Manuals Search And Download.
11. Remove the thermal interface protective cover from the heatsink.
12. Align the tab on the processor retention bracket with the alignment slot in the heatsink.
CAUTION: Heatsink retaining screws should be tightened in diagonally opposite pairs (in an "X" pattern).
NOTE: The T-15 Torx screwdriver is attached to the server access panel.
13. Install the heatsink.
Memory options
You can expand server memory by installing PC2-5300 Registered DDR2 SDRAM DIMMs. The server
supports up to 32 GB of memory using eight 4-GB DIMMs (four DIMMs per processor).
Hardware options installation 25
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: The Advanced Memory Protection option in RBSU provides additional memory protection beyond
Advanced ECC. By default, the server is set to Advanced ECC Support. For more information, refer to
Advanced ECC memory
Advanced ECC memory is the default memory protection mode for this server blade. In Advanced ECC,
the server blade is protected against correctable memory errors. The server blade provides notification if
the level of correctable errors exceeds a pre-defined threshold rate. The server blade does not fail
because of correctable memory errors. Advanced ECC provides additional protection over Standard ECC
because it is possible to correct certain memory errors that would otherwise be uncorrectable and result in
a server blade failure.
Whereas standard ECC can correct single-bit memory errors, Advanced ECC can correct single-bit
memory errors and multi-bit memory errors if all failed bits are on the same DRAM device on the DIMM.
DIMM installation guidelines
Observe the following guidelines when installing additional memory:
•
Install only ECC PC2-5300 Registered DDR2 SDRAM DIMMs that meet the following specifications:
•
•
Supply voltage: 1.8 V
Bus width: 72 bits
•
Observe the following special conditions when installing memory with a second processor:
•
•
Processor 2 can be installed without memory.
Any memory installed into banks for processor 2 can be used only if processor 2 is installed.
•
•
DIMMs must always be installed in pairs.
HP recommends installing DIMMs with the greatest capacity in the banks farthest from each
populated processor first.
•
•
DIMMs installed in the same memory bank must have the same part number.
DIMMs installed in different banks can be of different sizes.
CAUTION: Always wear an antistatic wrist strap when working inside the server.
The server blade supports multiple memory modes, based on DIMM population. Use RBSU ("HP ROM-
DIMM population order
Configuration
Bank A
Bank B
Bank C
Bank D
1A and 2A
3B and 4B
5C and 6C
7D and 8D
Single processor
Dual processor
1st
1st
2nd
3rd
—
—
2nd
4th
Installing DIMMs
Hardware options installation 26
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Remove the air baffles.
5. Open the DIMM slot latches.
6. Install the DIMM.
7. Install the air baffles.
Mezzanine card option
Optional mezzanine cards are classified as Type I mezzanine cards and Type II mezzanine cards. The
card type determines where it can be installed in the server blade.
•
•
Install Type I mezzanine cards on either mezzanine 1 connector or mezzanine 2 connector.
Install Type II mezzanine cards only on mezzanine 2 connector.
Hardware options installation 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional mezzanine cards enable network connectivity and provide Fibre Channel support. For
For mezzanine card signal mapping, see the HP ProLiant BL465c Server Blade Installation Instructions that
ship with this server blade.
To install the component:
4. Remove the mezzanine connector cover.
5. Install the mezzanine card. Press down on the connector to seat the board.
Hardware options installation 28
Download from Www.Somanuals.com. All Manuals Search And Download.
HP Smart Array E200i Battery-Backed Write Cache
module option
To install the component:
4. Remove the hard drives.
5. Remove the hard drive backplane.
6. Remove the front panel/hard drive cage assembly.
7. Remove the USB key, if installed.
Hardware options installation 29
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Remove the Smart Array E200i cache module.
9. Install the Smart Array E200i battery pack on the new cache module provided in the option kit.
Hardware options installation 30
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Install the Smart Array E200i cache module.
11. Install the USB key, if necessary.
12. Install the front panel/hard drive cage assembly.
13. Install the hard drive backplane.
Hardware options installation 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Cabling
In this section
Using the local I/O cable........................................................................................................................ 32
Connecting locally to a server blade with video and USB devices................................................................ 32
Using the local I/O cable
The local I/O cable enables the user to perform server blade administration, configuration, and
diagnostic procedures by connecting video and USB devices directly to the server blade. For local I/O
Connecting locally to a server blade with video and USB
devices
Use the local I/O cable to connect a monitor and any of the following USB devices:
•
•
•
•
•
USB hub
USB keyboard
USB mouse
USB CD/DVD-ROM drive
USB diskette drive
Numerous configurations are possible. This section offers two possible configurations.
Accessing a server blade with local KVM
CAUTION: Before disconnecting the local I/O cable from the connector, always squeeze the release
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
NOTE: For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
1. Connect the local I/O cable to the server blade.
2. Connect the video connector to a monitor.
3. Connect a USB mouse to one USB connector.
Cabling 32
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect a USB keyboard to the second USB connector.
Item
1
Description
Monitor
2
USB mouse
USB keyboard
Local I/O cable
3
4
Accessing a server blade with local media devices
Use the following configuration when configuring a server blade or loading software updates and
patches from a USB CD/DVD-ROM or a USB diskette.
1. Connect the local I/O cable to the server blade.
2. Connect the video connector to a monitor.
3. Connect a USB hub to one USB connector.
4. Connect the following to the USB hub:
•
•
•
•
USB CD/DVD-ROM drive
USB keyboard
USB mouse
USB diskette
Cabling 33
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Use a USB hub when connecting a USB diskette drive and/or USB CD-ROM drive to the server
blade. The USB hub provides additional connections.
Item
1
Description
Monitor
2
USB CD/DVD-ROM drive or diskette drive
3
USB keyboard
USB hub
4
5
USB mouse
6
Local I/O cable
Cabling 34
Download from Www.Somanuals.com. All Manuals Search And Download.
Software and configuration utilities
In this section
Server blade deployment tools................................................................................................................. 35
Configuration tools................................................................................................................................. 41
Option ROM Configuration for Arrays...................................................................................................... 44
Management tools.................................................................................................................................. 44
Diagnostic tools ..................................................................................................................................... 47
Remote support and analysis tools............................................................................................................ 48
Keeping the system current...................................................................................................................... 49
Server blade deployment tools
Software drivers and additional components
HP offers the following additional software components for server blades:
•
•
•
Health and Wellness driver and IML viewer
iLO 2 Management interface driver
Rack infrastructure interface service
For Microsoft® Windows® OS users, these items are included in the HP ProLiant iLO 2 Standard Blade
Edition, available from the HP website
Linux OS users can download these components from the HP website
For information on how to use these components with a Linux OS, see the HP website
HP BladeSystem c-Class Advanced management
iLO 2 is a standard component of ProLiant c-Class server blades that provides server health and remote
server blade manageability. Its features are accessed from a network client device using a supported web
browser. In addition to other features, iLO 2 provides keyboard, mouse, and video (text and graphics)
capability for a server blade, regardless of the state of the host OS or host server blade.
iLO 2 includes an intelligent microprocessor, secure memory, and a dedicated network interface. This
design makes iLO 2 independent of the host server blade and its OS. iLO 2 provides remote access to
any authorized network client, sends alerts, and provides other server blade management functions.
Using a supported web browser, you can:
•
Remotely access the console of the host server blade, including all text mode and graphics mode
screens with full keyboard and mouse controls.
•
Remotely power up, power down, or reboot the host server blade.
Software and configuration utilities 35
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Remotely boot a host server blade to a virtual media image to perform a ROM upgrade or install an
OS.
•
•
•
•
Send alerts from iLO 2 regardless of the state of the host server blade.
Access advanced troubleshooting features provided by iLO 2.
Launch a web browser, use SNMP alerting, and diagnose the server blade with HP SIM.
Configure static IP bay settings for the dedicated iLO 2 management NICs on each server blade in
an enclosure for faster deployment.
To connect to the server blade using iLO 2, install the server blade in an enclosure. Onboard
Administrator assigns an IP address to enable iLO 2 connectivity to the server blade.
The c-Class tab enables you to control specific settings for the HP BladeSystem. iLO 2 also provides web-
based status for the HP BladeSystem configuration.
For detailed information about iLO 2, refer to the HP Integrated Lights-Out User Guide on the HP website
Network-based PXE deployment
PXE is a component of the Intel® WfM specification. The PXE model enables server blades to load and
execute an NBP from a PXE server and to execute a pre-configured image. The image can be an OS
image created by software utilities or a boot diskette image. This feature enables a user to configure a
server blade and install an OS over a network.
Deployment overview
When a PXE-enabled target server blade boots, it obtains an IP address from a DHCP server. The target
server blade obtains the name of the NBP from the appropriate boot server. Then, the target server blade
uses TFTP to download the NBP from the boot server and executes the image.
IMPORTANT: To connect to a network with a Pass-Thru module, always connect the Pass-Thru module to a
network device that supports Gigabit speed.
For each server blade being deployed, the PXE server must be connected to the NIC designated for PXE.
The server blade defaults PXE functions to NIC 1, but any of the NC series NICs in the server blade can
be designated for PXE in RBSU. For NIC connector locations, refer to the documentation included with the
server blade.
NOTE: Actual NIC numeration depends on several factors, including the OS installed on the server blade.
To deploy an OS to multiple server blades, install a PXE deployment server on a network.
Deployment infrastructure
IMPORTANT: To connect to a network with a Pass-Thru module, always connect the Pass-Thru module to a
network device that supports Gigabit speed.
To establish a network-based PXE deployment infrastructure, provide the following software and minimum
hardware:
•
Client PC (administrative workstation)
•
AMD Athlon™ XP processor (700 MHz or greater recommended), AMD Athlon™ 64 processor,
or Intel® Pentium® III or higher processor (700 MHz or greater recommended)
•
•
•
128 MB of RAM
Microsoft® Windows® 2000 Professional or Microsoft® Windows® XP OS
Microsoft® Internet Explorer 5.5 or above with 128-bit encryption
Software and configuration utilities 36
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Ethernet NIC with 10/100 RJ-45 connector
TCP/IP networking and an IP address compatible with one of the following: the iLO 2 Diagnostic
Port IP address or an assigned DHCP or static IP address
•
•
CD-ROM drive, CD/DVD-ROM drive, and/or diskette drive
Any of the following Java™ Runtime Environment versions:
1.3.1_02
1.3.1_07
1.3.1_08
1.4.1 for Windows® users only
1.4.2 for Linux users only
Access the Java™ Runtime Environment versions at the HP website
•
•
•
DHCP server (IP address assignment)
•
AMD Athlon™ XP processor (700 MHz or greater recommended), AMD Athlon™ 64 processor,
or Intel® Pentium® or Pentium® II 200-MHz or faster processor
•
•
•
64 MB of RAM
64 MB of free hard drive space
10-Mb/s network adapter
PXE deployment server (storing boot images)
•
AMD Athlon™ XP processor (700 MHz or greater recommended), AMD Athlon™ 64 processor,
or Intel® Pentium® III or higher processor (500 MHz recommended)
•
•
•
256 MB of RAM
10-Mb/s network adapter
CD-ROM drive
Windows® repository server (Windows® or Linux deployment)
•
•
•
•
•
Windows® 2000 or Windows Server™ 2003 OS installed
Network connection
CD-ROM drive
1.5 GB of available disk space
TCP/IP networking and an IP address compatible with one of the following: the iLO 2 Diagnostic
Port IP address or an assigned DHCP or static IP address
•
•
CD-ROM drive and/or diskette drive
Any of the following Java™ Runtime Environment versions:
1.3.1_02
1.3.1_07
1.3.1_08
1.4.1 for Windows® users only
1.4.2 for Linux users only
Access the Java™ Runtime Environment versions at the HP website
•
Network server with an OS installed
Software and configuration utilities 37
Download from Www.Somanuals.com. All Manuals Search And Download.
Deployment methods
Three primary deployment methods are supported:
IMPORTANT: To deploy a server blade without the RDP, create a bootable diskette or image of a
bootable diskette.
•
•
•
PXE deployment
PXE enables server blades to load an image over the network from a PXE server, and then execute it in
memory. The first NIC on the server blade is the default PXE boot NIC, but any of the other NC series
NICs can be configured to boot PXE. For more information, refer to "Network-based PXE deployment (on
NOTE: Actual NIC numeration depends on several factors, including the OS installed on the server blade.
HP recommends using one of the following methods for PXE deployment:
•
•
A number of third-party PXE deployment tools are available for Windows® and Linux. For additional
information, refer to the HP website
HP ProLiant Essentials Rapid Deployment Pack
NOTE: To deploy server blades in an existing server blade enclosure, always use the most recent version of
The RDP software is the preferred method for rapid, high-volume server deployments. The RDP software
integrates two powerful products: Altiris Deployment Solution and the HP ProLiant Integration Module.
The intuitive graphical user interface of the Altiris Deployment Solution console provides simplified point-
and-click and drag-and-drop operations that enable you to deploy target servers, including server blades,
remotely. It enables you to perform imaging or scripting functions and maintain software images.
For more information about the RDP, refer to the HP ProLiant Essentials Rapid Deployment Pack CD or
SmartStart Scripting Toolkit
The SmartStart Scripting Toolkit is a server deployment product that delivers an unattended automated
installation for high-volume server deployments. The SmartStart Scripting Toolkit is designed to support
ProLiant BL, ML, and DL servers. The toolkit includes a modular set of utilities and important documentation
that describes how to apply these new tools to build an automated server deployment process.
Using SmartStart technology, the Scripting Toolkit provides a flexible way to create standard server
configuration scripts. These scripts are used to automate many of the manual steps in the server
configuration process. This automated server configuration process cuts time from each server deployed,
making it possible to scale server deployments to high volumes in a rapid manner.
For more information, and to download the SmartStart Scripting Toolkit, refer to the HP website
Software and configuration utilities 38
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-ROM deployment
CD-ROM deployment involves using a bootable CD that executes scripts to configure the hardware and
install the OS. After the OS is configured, the server blade can access the network to locate the scripts
and files necessary for deployment. Before beginning the deployment process, connect the server blade to
the network.
NOTE: For more information about hardware and cabling configurations, see the documents that ship with
the enclosure.
Two methods are available for CD-ROM deployment:
•
•
iLO virtual CD-ROM
iLO virtual CD-ROM
To deploy with a boot CD:
1. Do one of the following:
•
•
•
Insert the boot CD into the client PC that is using the iLO 2 Remote Console.
Use iLO 2 to create an image file of the boot CD.
Copy the image of the boot CD to a location on the network or the client PC hard drive.
2. Remotely access the server blade through iLO 2. Refer to "HP BladeSystem c-Class advanced
3. Click the Virtual Devices tab.
4. Select Virtual Media.
5. Use the Virtual Media applet to select the local CD or image file and connect the Virtual CD to the
server blade.
6. Use the iLO 2 Virtual Power Button feature to reboot the server blade.
7. After the server blade boots, follow the normal network installation procedure for the OS.
USB CD-ROM
This method uses SmartStart to facilitate loading the OS. However, SmartStart also allows for manual
loading of the OS and drivers.
To deploy with a boot CD:
1. Use the local I/O cable to connect a USB CD-ROM drive to the server blade. Refer to "Connecting
2. Insert the boot CD into the USB CD-ROM drive.
3. Reboot the server blade.
4. After the server blade boots, follow the normal installation procedure for an OS.
Windows Server™ 2003 cannot be installed from a USB CD-ROM on the I/O cable if the hard drive is
completely blank (no partitions defined). To install Windows Server™ 2003, use one of the following
methods:
•
•
•
Make a partition on the hard drive that Windows Server™ 2003 will be loaded on.
Use the SmartStart CD 7.0 or higher.
Use the Rapid Deployment Pack.
Software and configuration utilities 39
Download from Www.Somanuals.com. All Manuals Search And Download.
Diskette image deployment
To deploy with a diskette image, the user creates a DOS-based network-enabled boot diskette that
executes a script that configures the hardware and installs the OS. The diskette enables the server blade
to access the required deployment scripts and files on the network.
This method implies a deployment infrastructure that may include an administrator workstation, PXE
server, Microsoft® Windows® file share, or a Linux file share. For more information, refer to "Deployment
Before beginning the deployment process, connect the server blade to the network.
NOTE: For more information about hardware and cabling configurations, see the documents that ship with
the enclosure.
Two methods are available for diskette image deployment:
•
•
iLO virtual floppy
To deploy with a boot diskette:
1. Do one of the following:
•
•
•
Insert the boot diskette into the client PC that is using the iLO 2 Remote Console.
Use iLO 2 to create an image file of the boot diskette.
Copy the image of the boot diskette to a location on the network or the client PC hard drive.
2. Remotely access the server blade through iLO 2. Refer to "HP BladeSystem c-Class advanced
3. Click the Virtual Devices tab.
4. Select Virtual Media.
5. Use the Virtual Media applet to select the local diskette or image file and connect the Virtual CD to
the server blade.
6. Use the iLO 2 Virtual Power Button feature to reboot the server blade.
7. After the server blade boots, follow the normal network installation procedure for the OS.
Creating a boot diskette
The SmartStart Scripting Toolkit provides the tools and information for creating a boot diskette. For details,
refer to the SmartStart Scripting Toolkit User Guide and download the latest version of the software from
As an alternative method, configure the hardware manually with RBSU and the iLO 2 remote console.
With this method, the disk is more generic and integrates with an existing network OS installation
To operate properly, the server blade must have a supported OS. For the latest information on a
Software and configuration utilities 40
Download from Www.Somanuals.com. All Manuals Search And Download.
Configuration tools
SmartStart software
SmartStart is a collection of software that optimizes single-server setup, providing a simple and consistent
way to deploy server configuration. SmartStart has been tested on many ProLiant server products,
resulting in proven, reliable configurations.
SmartStart assists the deployment process by performing a wide range of configuration activities,
including:
•
•
•
Configuring hardware using embedded configuration utilities, such as RBSU and ORCA
Preparing the system for installing "off-the-shelf" versions of leading operating system software
Installing optimized server drivers, management agents, and utilities automatically with every
assisted installation
•
•
Installing software drivers directly from the CD. With systems that have internet connection, the
SmartStart Autorun Menu provides access to a complete list of ProLiant system software.
•
SmartStart is included in the HP ProLiant Essentials Foundation Pack. For more information about
SmartStart software, refer to the HP ProLiant Essentials Foundation Pack or the HP website
HP ROM-Based Setup Utility
RBSU, an embedded configuration utility, performs a wide range of configuration activities that may
include:
•
•
•
•
•
Configuring system devices and installed options
Displaying system information
Selecting the primary boot controller
Configuring memory options
Language selection
For more information on RBSU, refer to the HP ROM-Based Setup Utility User Guide on the Documentation
Using RBSU
The first time you power up the server blade, the system prompts you to enter RBSU and select a
language. Default configuration settings are made at this time and can be changed later. Most of the
features in RBSU are not required to set up the server blade.
To navigate RBSU, use the following keys:
•
To access RBSU, press the F9 key during power up when prompted in the upper right corner of the
screen.
•
•
To navigate the menu system, use the arrow keys.
To make selections, press the Enter key.
Software and configuration utilities 41
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT: RBSU automatically saves settings when you press the Enter key. The utility does not prompt
you for confirmation of settings before you exit the utility. To change a selected setting, you must select a
different setting and press the Enter key.
Auto-configuration process
The auto-configuration process automatically runs when you boot the server for the first time. During the
power-up sequence, the system ROM automatically configures the entire system without needing any
intervention. During this process, the ORCA utility, in most cases, automatically configures the array to a
default setting based on the number of drives connected to the server.
NOTE: The server may not support all the following examples.
NOTE: If the boot drive is not empty or has been written to in the past, ORCA does not automatically
configure the array. You must run ORCA to configure the array settings.
Drives installed
Drives used
RAID level
RAID 0
RAID 1
RAID 5
None
1
1
2
2
3, 4, 5, or 6
More than 6
3, 4, 5, or 6
0
To change any ORCA default settings and override the auto-configuration process, press the F8 key when
prompted.
By default, the auto-configuration process configures the system for the English language. To change any
default settings in the auto-configuration process (such as the settings for language, operating system, and
primary boot controller), execute RBSU by pressing the F9 key when prompted. After the settings are
selected, exit RBSU and allow the server to reboot automatically.
For more information, refer to the HP ROM-Based Setup Utility User Guide on the Documentation CD or
Boot options
After the auto-configuration process completes, or after the server reboots upon exit from RBSU, the POST
sequence runs, and then the boot option screen is displayed. This screen is visible for several seconds
before the system attempts to boot from a diskette, CD, or hard drive. During this time, the menu on the
screen allows you to install an operating system or make changes to the server configuration in RBSU.
BIOS Serial Console
BIOS Serial Console allows you to configure the serial port to view POST error messages and run RBSU
remotely through a serial connection to the server COM port. The server that you are remotely configuring
does not require a keyboard and mouse.
For more information about BIOS Serial Console, refer to the BIOS Serial Console User Guide on the
Array Configuration Utility
ACU is a browser-based utility with the following features:
•
•
Runs as a local application or remote service
Supports online array capacity expansion, logical drive extension, assignment of online spares, and
RAID or stripe size migration
Software and configuration utilities 42
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Suggests the optimum configuration for an unconfigured system
Provides different operating modes, enabling faster configuration or greater control over the
configuration options
•
•
Remains available any time that the server is on
Displays on-screen tips for individual steps of a configuration procedure
For optimum performance, the minimum display settings are 800 × 600 resolution and 256 colors.
Servers running Microsoft® operating systems require Internet Explorer 5.5 (with Service Pack 1) or later.
For Linux servers, refer to the README.TXT file for additional browser and support information.
For more information, refer to the HP Array Configuration Utility User Guide on the Documentation CD or
SAN configuration
The server blade provides FC support for SAN implementations. This solution uses an optional FCA that
offers redundant SAN connectivity and optimization for HP StorageWorks products. The server blade is
also compatible with certain third-party SAN products. For more information, refer to the documentation
that ships with the FCA option.
For optimal SAN connectivity, observe the following guidelines:
•
•
•
The FCA option is installed correctly in the server blade. Refer to the documentation that ships with
the FCA option.
An FC-compatible interconnect is installed in the enclosure. Refer to the documentation that ships
with the interconnect option.
The server blade enclosure management module firmware is up-to-date. Refer to the HP Business
•
•
The server blade is cabled properly to a supported SAN.
SAN storage drivers are loaded. Refer to supporting white papers and the HP website
For SAN configuration information for the server blade, refer to the HP StorageWorks SAN Design
Reference Guide on the HP website
Re-entering the server serial number and product ID
After you replace the system board, you must re-enter the server serial number and the product ID.
1. During the server startup sequence, press the F9 key to access RBSU.
2. Select the System Options menu.
3. Select Serial Number. The following warning is displayed:
WARNING! WARNING! WARNING! The serial number is loaded into the system
during the manufacturing process and should NOT be modified. This option
should only be used by qualified service personnel. This value should
always match the serial number sticker located on the chassis.
4. Press the Enter key to clear the warning.
5. Enter the serial number and press the Enter key.
6. Select Product ID.
7. Enter the product ID and press the Enter key.
8. Press the Esc key to close the menu.
9. Press the Esc key to exit RBSU.
Software and configuration utilities 43
Download from Www.Somanuals.com. All Manuals Search And Download.
10. Press the F10 key to confirm exiting RBSU. The server will automatically reboot.
Option ROM Configuration for Arrays
Before installing an operating system, you can use the ORCA utility to create the first logical drive, assign
RAID levels, and establish online spare configurations.
The utility also provides support for the following functions:
•
•
•
•
Reconfiguring one or more logical drives
Viewing the current logical drive configuration
Deleting a logical drive configuration
Setting the controller to be the boot controller
If you do not use the utility, ORCA will default to the standard configuration.
For more information regarding array controller configuration, refer to the controller user guide.
For more information regarding the default configurations that ORCA uses, refer to the HP ROM-Based
Setup Utility User Guide on the Documentation CD.
Management tools
Automatic Server Recovery
ASR is a feature that causes the system to restart when a catastrophic operating system error occurs, such
as a blue screen, ABEND, or panic. A system fail-safe timer, the ASR timer, starts when the System
Management driver, also known as the Health Driver, is loaded. When the operating system is
functioning properly, the system periodically resets the timer. However, when the operating system fails,
the timer expires and restarts the server.
ASR increases server availability by restarting the server within a specified time after a system hang or
shutdown. At the same time, the HP SIM console notifies you by sending a message to a designated
pager number that ASR has restarted the system. You can disable ASR from the HP SIM console or
through RBSU.
ROMPaq utility
Flash ROM enables you to upgrade the firmware (BIOS) with system or option ROMPaq utilities. To
upgrade the BIOS, insert a ROMPaq diskette into the diskette drive and boot the system.
The ROMPaq utility checks the system and provides a choice (if more than one exists) of available ROM
revisions. This procedure is the same for both system and option ROMPaq utilities.
For more information about the ROMPaq utility, refer to the HP website
Integrated Lights-Out 2 technology
The iLO 2 subsystem is a standard component of selected ProLiant servers that provides server health and
remote server manageability. The iLO 2 subsystem includes an intelligent microprocessor, secure memory,
and a dedicated network interface. This design makes iLO 2 independent of the host server and its
operating system. The iLO 2 subsystem provides remote access to any authorized network client, sends
alerts, and provides other server management functions.
Using iLO 2, you can:
Software and configuration utilities 44
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
•
Remotely power up, power down, or reboot the host server.
Send alerts from iLO 2 regardless of the state of the host server.
Access advanced troubleshooting features through the iLO 2 interface.
Diagnose iLO 2 using HP SIM through a web browser and SNMP alerting.
For more information about iLO 2 features, refer to the iLO 2 documentation on the Documentation CD or
Erase Utility
CAUTION: Perform a backup before running the System Erase Utility. The utility sets the system to its
original factory state, deletes the current hardware configuration information, including array setup and disk
partitioning, and erases all connected hard drives completely. Refer to the instructions for using this utility.
Run the Erase Utility if you must erase the system for the following reasons:
•
•
You want to install a new operating system on a server with an existing operating system.
You encounter an error when completing the steps of a factory-installed operating system installation.
The Erase Utility can be accessed from the Maintenance Utilities menu of the SmartStart CD
StorageWorks library and tape tools
HP StorageWorks L&TT provides functionality for firmware downloads, verification of device operation,
maintenance procedures, failure analysis, corrective service actions, and some utility functions. It also
provides seamless integration with HP hardware support by generating and emailing support tickets that
deliver a snapshot of the storage system.
For more information, and to download the utility, refer to the StorageWorks L&TT website
HP Systems Insight Manager
HP SIM is a web-based application that allows system administrators to accomplish normal administrative
tasks from any remote location, using a web browser. HP SIM provides device management capabilities
that consolidate and integrate management data from HP and third-party devices.
IMPORTANT: You must install and use HP SIM to benefit from the Pre-Failure Warranty for processors,
SAS and SCSI hard drives, and memory modules.
For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack or
Management Agents
Management Agents provide the information to enable fault, performance, and configuration
management. The agents allow easy manageability of the server through HP SIM software, and third-
party SNMP management platforms. Management Agents are installed with every SmartStart assisted
installation or can be installed through the HP PSP. The Systems Management homepage provides status
and direct access to in-depth subsystem information by accessing data reported through the Management
Agents. For additional information, refer to the Management CD in the HP ProLiant Essentials Foundation
Software and configuration utilities 45
Download from Www.Somanuals.com. All Manuals Search And Download.
HP ProLiant Essentials Virtualization Management Software
The ProLiant Essentials Virtual Machine Management Pack and ProLiant Essentials Server Migration Pack
plug-ins extend HP Systems Insight Manager capabilities to manage virtual machines.
The Virtual Machine Management Pack provides central management and control of VMware® and
Microsoft® virtual machines with physical host to virtual machine association, easy identification of VMs
or host servers reaching high CPU, memory or disk utilization levels, highly flexible move capabilities that
allow live moves and moves to dissimilar host resources, and back up, template and alternate host
capabilities that enable restoration of VMs on any available host.
The Server Migration Pack automates the manual processes required for migrating servers between
physical or virtual platforms (P2V, V2P, and V2V), allowing you to easily move servers to appropriate
physical or virtual platforms that meet performance and capacity requirements.
For more information about Virtualization Management Software, see the HP website
HP ProLiant Essentials Server Migration Pack - Physical to ProLiant Edition
The HP ProLiant Essentials Server Migration Pack – Physical to ProLiant Edition (SMP – P2P) software
enables you to upgrade or replace your existing server. SMP – P2P provides an automated, accurate and
affordable way to migrate existing servers and their content to the latest server technologies.
SMP – P2P automates the migration of the operating system, applications, and data from one server to
another without errors, eliminating the need to manually redeploy these elements on the new server from
scratch. During the migration process, it automatically removes old drivers and injects new drivers on the
destination server. The wizard driven user interface makes it easy to set up a migration without any prior
training.
HP BladeSystem Essentials Insight Control Data Center Edition
HP BladeSystem Essentials Insight Control Data Center Edition is an integrated suite of software that
simplifies the management of HP BladeSystem infrastructures. Using a wizard-based installer, Insight
Control Data Center Edition installs and configures HP Systems Insight Manager (HP SIM) and HP ProLiant
Essentials management software rapidly and consistently, reducing manual procedures and enabling a
faster deployment of production HP server blades.
The software installed by Insight Control Data Center Edition delivers core management functionality for
HP BladeSystem lifecycles, including hardware resource deployment, health monitoring, performance
monitoring, vulnerability scanning, and patch management. Insight Control Data Center Edition is
delivered as a standard feature of HP BladeSystem c-Class enclosures and is available as a software
option for HP BladeSystem p-Class environments.
For more information about Insight Control Data Center Edition, see the HP website
Redundant ROM support
The server enables you to upgrade or configure the ROM safely with redundant ROM support. The server
has a 4-MB ROM that acts as two, separate 2-MB ROMs. In the standard implementation, one side of the
ROM contains the current ROM program version, while the other side of the ROM contains a backup
version.
NOTE: The server ships with the same version programmed on each side of the ROM.
Software and configuration utilities 46
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety and security benefits
When you flash the system ROM, ROMPaq writes over the backup ROM and saves the current ROM as a
backup, enabling you to switch easily to the alternate ROM version if the new ROM becomes corrupted
for any reason. This feature protects the existing ROM version, even if you experience a power failure
while flashing the ROM.
USB support and functionality
USB support
HP provides both standard USB support and legacy USB support. Standard support is provided by the OS
through the appropriate USB device drivers. Before the OS loads, HP provides support for USB devices
through legacy USB support, which is enabled by default in the system ROM. HP hardware supports USB
version 1.1 or 2.0, depending on the version of the hardware.
Legacy USB support provides USB functionality in environments where USB support is normally not
available. Specifically, HP provides legacy USB functionality for:
•
•
•
•
•
POST
RBSU
Diagnostics
DOS
Operating environments which do not provide native USB support
For more information on ProLiant USB support, refer to the HP website
Internal USB functionality
An internal USB connector is available for use with security key devices and USB drive keys. This solution
provides for use of a permanent USB key installed in the internal connector, avoiding issues of clearance
on the front of the rack and physical access to secure data.
For additional security, external USB functionality can be disabled through RBSU. Disabling external USB
support in RBSU disables the USB connectors on the local I/O cable. Internal USB functionality is
unaffected.
Diagnostic tools
HP Insight Diagnostics
HP Insight Diagnostics is a proactive server blade management tool, available in both offline and online
versions, that provides diagnostics and troubleshooting capabilities to assist IT administrators who verify
server blade installations, troubleshoot problems, and perform repair validation.
HP Insight Diagnostics Offline Edition performs various in-depth system and component testing while the
OS is not running. To run this utility, launch the SmartStart CD.
HP Insight Diagnostics Online Edition is a web-based application that captures system configuration and
other related data needed for effective server blade management. Available in Microsoft® Windows®
and Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, refer to the HP website
Software and configuration utilities 47
Download from Www.Somanuals.com. All Manuals Search And Download.
Survey Utility
software information on ProLiant server blades.
This utility supports operating systems that may not be supported by the server blade. For operating
If a significant change occurs between data-gathering intervals, the Survey Utility marks the previous
information and overwrites the Survey text files to reflect the latest changes in the configuration.
Survey Utility is installed with every SmartStart-assisted installation or can be installed through the HP PSP
NOTE: SmartStart version 7.51 and later provides the memory spare part numbers for the server.
Integrated Management Log
The IML records hundreds of events and stores them in an easy-to-view form. The IML timestamps each
event with 1-minute granularity.
You can view recorded events in the IML in several ways, including the following:
•
•
•
From within Survey Utility
From within operating system-specific IML viewers
•
•
•
For NetWare: IML Viewer
For Windows®: IML Viewer
For Linux: IML Viewer Application
•
•
From within the iLO 2 user interface
For more information, refer to the Management CD in the HP ProLiant Essentials Foundation Pack.
Array Diagnostic Utility
ADU is a tool that collects information about array controllers and generates a list of detected problems.
Remote support and analysis tools
HP Instant Support Enterprise Edition
ISEE is a proactive remote monitoring and diagnostic tool to help manage your systems and devices, a
feature of HP support. ISEE provides continuous hardware event monitoring and automated notification to
identify and prevent potential critical problems. Through remote diagnostic scripts and vital system
configuration information collected about your systems, ISEE enables fast restoration of your systems.
Install ISEE on your systems to help mitigate risk and prevent potential critical problems.
For more information on ISEE, refer to the HP website
Software and configuration utilities 48
Download from Www.Somanuals.com. All Manuals Search And Download.
For installation information, refer to the HP ISEE Client Installation and Upgrade Guide
Web-Based Enterprise Service
WEBES enables administrators to manage hardware events proactively, either locally or online. The
service provides real-time multiple event analysis, crash analysis, and notification, locally through SMTP
and remotely through ISEE for OpenVMS, Tru64, and Microsoft® Windows® operating system binary
error logs.
Open Services Event Manager
OSEM is a standalone tool that performs real-time reactive and proactive service event filtering, analysis,
and notification. The tool gathers event data from SNMP traps or information provided over an HTTP
interface and notifies an administrator or HP through SMTP and ISEE.
Keeping the system current
Drivers
The server includes new hardware that may not have driver support on all operating system installation
media.
If you are installing a SmartStart-supported operating system, use the SmartStart software (on page 41)
and its Assisted Path feature to install the operating system and latest driver support.
NOTE: If you are installing drivers from the SmartStart CD or the Software Maintenance CD, refer to the
SmartStart website (http://www.hp.com/servers/smartstart) to be sure that you are using the latest version
of SmartStart. For more information, refer to the documentation provided with the SmartStart CD.
If you do not use the SmartStart CD to install an operating system, drivers for some of the new hardware
are required. These drivers, as well as other option drivers, ROM images, and value-add software can be
IMPORTANT: Always perform a backup before installing or updating device drivers.
Resource Paqs
Resource Paqs are operating system-specific packages of tools, utilities, and information for HP servers
running certain Microsoft® or Novell operating systems. The Resource Paqs include utilities to monitor
performance, software drivers, customer support information, and white papers on the latest server
integration information. Refer to the Enterprise Partnerships website
system, and follow the link to the appropriate Resource Paq.
ProLiant Support Packs
PSPs represent operating system-specific bundles of ProLiant optimized drivers, utilities, and management
agents. Refer to the PSP website
Software and configuration utilities 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating system version support
System Online ROM flash component utility
The Online ROM Flash Component Utility enables system administrators to efficiently upgrade system or
controller ROM images across a wide range of servers and array controllers. This tool has the following
features:
•
•
Works offline and online
Supports Microsoft® Windows NT®, Windows® 2000, Windows Server™ 2003, Novell Netware,
and Linux operating systems
IMPORTANT: This utility supports operating systems that may not be supported by the server. For
operating systems supported by the server, refer to the HP website (http://www.hp.com/go/supportos).
•
•
Integrates with other software maintenance, deployment, and operating system tools
Automatically checks for hardware, firmware, and operating system dependencies, and installs only
the correct ROM upgrades required by each target server
To download the tool and for more information, refer to the HP website
Change control and proactive notification
HP offers Change Control and Proactive Notification to notify customers 30 to 60 days in advance of
upcoming hardware and software changes on HP commercial products.
For more information, refer to the HP website
Natural language search assistant
search engine that finds information on HP products, including ProLiant servers. The search engine
responds to queries entered in question form.
Care Pack
HP Care Pack Services offer upgraded service levels to extend and expand standard product warranty
with easy-to-buy, easy-to-use support packages that help you make the most of your server investments.
Software and configuration utilities 50
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
In this section
Troubleshooting resources ....................................................................................................................... 51
Pre-diagnostic steps ................................................................................................................................ 51
Service notifications................................................................................................................................ 54
Loose connections .................................................................................................................................. 54
Troubleshooting flowcharts...................................................................................................................... 54
POST error messages and beep codes...................................................................................................... 64
Troubleshooting resources
NOTE: For common troubleshooting procedures, the term "server" is used to mean servers and server
blades.
The HP ProLiant Servers Troubleshooting Guide provides simple procedures for resolving common
problems as well as a comprehensive course of action for fault isolation and identification, error message
interpretation, issue resolution, and software maintenance.
To obtain the guide, refer to any of the following sources and then select the HP ProLiant Servers
Troubleshooting Guide:
•
•
The server-specific Documentation CD
server technical support page. Under self-help resources, select ProLiant Troubleshooting
Guide.
•
Workstations and Systems Hardware, and then the appropriate server.
Pre-diagnostic steps
WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary
information in the server documentation before removing, replacing, reseating, or
modifying system components.
IMPORTANT: This guide provides information for multiple servers. Some information may not apply to the
server you are troubleshooting. Refer to the server documentation for information on procedures, hardware
options, software tools, and operating systems supported by the server.
3. Prepare the server for diagnosis.
Troubleshooting 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety information
Familiarize yourself with the safety information in the following sections before troubleshooting the server.
Important safety information
Before servicing this product, read the Important Safety Information document provided with the server.
Symbols on equipment
The following symbols may be placed on equipment to indicate the presence of potentially hazardous
conditions.
This symbol indicates the presence of hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
WARNING: To reduce the risk of injury from electric shock hazards, do not open
this enclosure. Refer all maintenance, upgrades, and servicing to qualified personnel.
This symbol indicates the presence of electric shock hazards. The area contains no
user or field serviceable parts. Do not open for any reason.
WARNING: To reduce the risk of injury from electric shock hazards, do not open
this enclosure.
This symbol on an RJ-45 receptacle indicates a network interface connection.
WARNING: To reduce the risk of electric shock, fire, or damage to the equipment,
do not plug telephone or telecommunications connectors into this receptacle.
This symbol indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists.
WARNING: To reduce the risk of injury from a hot component, allow the surface to
cool before touching.
This symbol indicates that the component exceeds the recommended weight for one
individual to handle safely.
5.9 kg
WARNING: To reduce the risk of personal injury or damage to the equipment,
observe local occupational health and safety requirements and guidelines for manual
material handling.
13.00 lb
These symbols, on power supplies or systems, indicate that the equipment is supplied
by multiple sources of power.
WARNING: To reduce the risk of injury from electric shock, remove all power
cords to completely disconnect power from the system.
Warnings
WARNING: Only authorized technicians trained by HP should attempt to repair this
equipment. All troubleshooting and repair procedures are detailed to allow only
Troubleshooting 52
Download from Www.Somanuals.com. All Manuals Search And Download.
subassembly/module-level repair. Because of the complexity of the individual boards
and subassemblies, no one should attempt to make repairs at the component level or to
make modifications to any printed wiring board. Improper repairs can create a safety
hazard.
WARNING: To reduce the risk of personal injury or damage to the equipment, be sure
that:
•
•
•
•
•
The leveling feet are extended to the floor.
The full weight of the rack rests on the leveling feet.
The stabilizing feet are attached to the rack if it is a single-rack installation.
The racks are coupled together in multiple-rack installations.
Only one component is extended at a time. A rack may become unstable if more than
one component is extended for any reason.
Symptom information
Before troubleshooting a server problem, collect the following information:
•
•
•
What events preceded the failure? After which steps does the problem occur?
What has been changed since the time the server was working?
Did you recently add or remove hardware or software? If so, did you remember to change the
appropriate settings in the server setup utility, if necessary?
•
•
How long has the server exhibited problem symptoms?
If the problem occurs randomly, what is the duration or frequency?
To answer these questions, the following information may be useful:
•
or to compare it to previous configurations.
•
•
Refer to your hardware and software records for information.
Refer to server LEDs and their statuses.
Prepare the server for diagnosis
1. Be sure the server is in the proper operating environment with adequate power, air conditioning,
and humidity control. Refer to the server documentation for required environmental conditions.
2. Record any error messages displayed by the system.
3. Remove all diskettes and CDs from the media drives.
4. Power down the server and peripheral devices if you will be diagnosing the server offline. Always
perform an orderly shutdown, if possible. This means you must:
a. Exit any applications.
b. Exit the operating system.
5. Disconnect any peripheral devices not required for testing (any devices not necessary to power up
the server). Do not disconnect the printer if you want to use it to print error messages.
6. Collect all tools and utilities, such as a Torx screwdriver, loopback adapters, ESD wrist strap, and
software utilities, necessary to troubleshoot the problem.
•
You must have the appropriate Health Drivers and Management Agents installed on the server.
Troubleshooting 53
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: To verify the server configuration, connect to the System Management homepage and select
Version Control Agent. The VCA gives you a list of names and versions of all installed HP drivers,
Management Agents, and utilities, and whether they are up to date.
•
•
HP recommends you have access to the server documentation for server-specific information.
HP recommends you have access to the SmartStart CD for value-added software and drivers
required during the troubleshooting process.
NOTE: Download the current version of SmartStart from the HP website
Service notifications
To view the latest service notifications, refer to the HP website (http://www.hp.com/go/bizsupport).
Select the appropriate server model, and then click the Troubleshoot a Problem link on the product
page.
Loose connections
Action:
•
•
Be sure all power cords are securely connected.
Be sure all cables are properly aligned and securely connected for all external and internal
components.
•
•
Remove and check all data and power cables for damage. Be sure no cables have bent pins or
damaged connectors.
If a fixed cable tray is available for the server, be sure the cords and cables connected to the server
are correctly routed through the tray.
•
•
•
•
Be sure each device is properly seated.
If a device has latches, be sure they are completely closed and locked.
Check any interlock or interconnect LEDs that may indicate a component is not connected properly.
If problems continue to occur, remove and reinstall each device, checking the connectors and sockets
for bent pins or other damage.
Troubleshooting flowcharts
To effectively troubleshoot a problem, HP recommends that you start with the first flowchart in this section,
flowcharts do not provide a troubleshooting solution, follow the diagnostic steps in "General diagnosis
flowchart (on page 56)." The General diagnosis flowchart is a generic troubleshooting process to be used
when the problem is not server-specific or is not easily categorized into the other flowcharts.
The available flowcharts include:
•
•
•
•
•
•
Troubleshooting 54
Download from Www.Somanuals.com. All Manuals Search And Download.
General diagnosis flowchart
The General diagnosis flowchart provides a generic approach to troubleshooting. If you are unsure of the
problem, or if the other flowcharts do not fix the problem, use the following flowchart.
Item
1
See
2
3
4
The most recent version of a particular server or option firmware is
available on the following websites:
•
•
HP ROM-BIOS/Firmware Updates website
5
6
"General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
•
•
•
•
•
•
•
Maintenance and service guides for p-Class server blades, located
on the Documentation CD or the HP website
Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
7
Maintenance and service guides for p-Class server blades, located
on the Documentation CD or the HP website
Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
8
9
"Server information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
"Operating system information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
Troubleshooting 56
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: For the location of server LEDs and information on their statuses, refer to the server documentation.
Possible causes:
•
•
•
•
•
•
Improperly seated or faulty power supply
Loose or faulty power cord
Power source problem
Power on circuit problem
Improperly seated component or interlock problem
Faulty internal component
Item
See
1
2
Maintenance and service guides for c-Class server blades, located on
3
Integrated Lights-Out User Guide located on the HP website
Troubleshooting 58
Download from Www.Somanuals.com. All Manuals Search And Download.
POST problems flowchart
Symptoms:
•
Server does not complete POST
NOTE: The server has completed POST when the system attempts to access the boot device.
•
Server completes POST with errors
Possible problems:
•
•
•
Improperly seated or faulty internal component
Faulty KVM device
Faulty video device
Item
Refer to
1
2
3
"Video problems" in the HP ProLiant Servers Troubleshooting Guide
located on the Documentation CD or on the HP website
4
5
"General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
6
•
•
•
•
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
7
"Server information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
"Operating system information you need" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
Troubleshooting 59
Download from Www.Somanuals.com. All Manuals Search And Download.
OS boot problems flowchart
There are two ways to use SmartStart when diagnosing OS boot problems on a server blade:
•
•
Use iLO to remotely attach virtual devices to mount the SmartStart CD onto the server blade.
Use a local I/O cable and drive to connect to the server blade, and then restart the server blade.
Symptoms:
•
•
Server does not boot a previously installed OS
Server does not boot SmartStart
Troubleshooting 60
Download from Www.Somanuals.com. All Manuals Search And Download.
Possible causes:
•
•
•
Corrupted OS
Hard drive subsystem problem
Incorrect boot order setting in RBSU
Item
See
1
HP ROM-Based Setup Utility User Guide
2
3
•
"Hard drive problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
•
Controller documentation
4
5
Troubleshooting Guide located on the Documentation CD or on the HP
•
•
"CD-ROM and DVD drive problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
•
Controller documentation
6
7
"General memory problems are occurring" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP
•
"Operating system problems" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
•
•
8
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
•
•
Maintenance and service guides for p-Class server blades, located
on the Documentation CD or the HP website
Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
9
Troubleshooting 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Server fault indications flowchart
Symptoms:
•
•
Server boots, but the internal health LED, external health LED, or component health LED is red or
amber
NOTE: For the location of server LEDs and information on their statuses, refer to the server documentation.
Troubleshooting 62
Download from Www.Somanuals.com. All Manuals Search And Download.
Possible causes:
•
•
•
•
Improperly seated or faulty internal or external component
Unsupported component installed
Redundancy failure
System overtemperature condition
Item
See
1
2
Troubleshooting Guide located on the Documentation CD or on the HP
•
"Integrated Management Log" or in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the
•
"Event list error messages" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
3
4
5
6
•
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
•
Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
•
•
7
"Hardware problems" in the HP ProLiant Servers Troubleshooting
Guide located on the Documentation CD or on the HP website
•
Maintenance and service guides for c-Class server blades, located
on the Documentation CD or the HP website
Troubleshooting 63
Download from Www.Somanuals.com. All Manuals Search And Download.
POST error messages and beep codes
Introduction to POST error messages
The error messages and codes in this section include all new messages generated by this server blade.
Some messages are informational and do not indicate an error. A server blade generates only the codes
that are applicable to its configuration and options.
Troubleshooting 64
Download from Www.Somanuals.com. All Manuals Search And Download.
For a complete listing of error messages, refer to the "POST error messages" in the HP ProLiant Servers
Troubleshooting Guide located on the Documentation CD or on the HP website
WARNING: To avoid potential problems, ALWAYS read the warnings and cautionary
information in the server documentation before removing, replacing, reseating, or
modifying system components.
Processor X Unsupported Wattage.
Audible beeps: 1 long, 1 short
Possible cause: Processor not supported by current server blade.
Action: Refer to the server blade documentation for supported processors. If the processor is supported,
remove the processor, update the system to latest ROM, and then reinstall the processor.
Troubleshooting 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Battery replacement
If the server blade no longer automatically displays the correct date and time, you may need to replace
the battery that provides power to the real-time clock. Under normal use, battery life is 5 to 10 years.
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack
is not properly handled. To reduce the risk of personal injury:
•
•
•
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or
water.
•
Replace only with the spare designated for this product.
To remove the component:
5. Remove the battery.
IMPORTANT: Replacing the system board battery resets the system ROM to its default configuration. After
replacing the battery, reconfigure the system through RBSU.
To replace the component, reverse the removal procedure.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
Battery replacement 66
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory compliance notices
In this section
Regulatory compliance identification numbers ........................................................................................... 67
Federal Communications Commission notice ............................................................................................. 67
Modifications......................................................................................................................................... 69
Cables.................................................................................................................................................. 69
Canadian notice (Avis Canadien) ............................................................................................................ 69
European Union regulatory notice ............................................................................................................ 69
Disposal of waste equipment by users in private households in the European Union....................................... 70
Japanese notice ..................................................................................................................................... 70
BSMI notice........................................................................................................................................... 70
Korean notice ........................................................................................................................................ 71
Laser compliance ................................................................................................................................... 71
Battery replacement notice ...................................................................................................................... 71
Taiwan battery recycling notice ............................................................................................................... 72
Regulatory compliance identification numbers
For the purpose of regulatory compliance certifications and identification, this product has been assigned
a unique regulatory model number. The regulatory model number can be found on the product nameplate
label, along with all required approval markings and information. When requesting compliance
information for this product, always refer to this regulatory model number. The regulatory model number is
not the marketing name or model number of the product.
Federal Communications Commission notice
Part 15 of the Federal Communications Commission (FCC) Rules and Regulations has established Radio
Frequency (RF) emission limits to provide an interference-free radio frequency spectrum. Many electronic
devices, including computers, generate RF energy incidental to their intended function and are, therefore,
covered by these rules. These rules place computers and related peripheral devices into two classes, A
and B, depending upon their intended installation. Class A devices are those that may reasonably be
expected to be installed in a business or commercial environment. Class B devices are those that may
reasonably be expected to be installed in a residential environment (for example, personal computers).
The FCC requires devices in both classes to bear a label indicating the interference potential of the device
as well as additional operating instructions for the user.
FCC rating label
The FCC rating label on the device shows the classification (A or B) of the equipment. Class B devices
have an FCC logo or ID on the label. Class A devices do not have an FCC logo or ID on the label. After
you determine the class of the device, refer to the corresponding statement.
Regulatory compliance notices 67
Download from Www.Somanuals.com. All Manuals Search And Download.
Class A equipment
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user will be required to correct
the interference at personal expense.
Class B equipment
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit that is different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio or television technician for help.
Declaration of conformity for products marked with the
FCC logo, United States only
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
For questions regarding this product, contact us by mail or telephone:
•
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 530113
Houston, Texas 77269-2000
•
1-800-HP-INVENT (1-800-474-6836). (For continuous quality improvement, calls may be recorded
or monitored.)
For questions regarding this FCC declaration, contact us by mail or telephone:
•
Hewlett-Packard Company
P. O. Box 692000, Mail Stop 510101
Houston, Texas 77269-2000
•
1-281-514-3333
To identify this product, refer to the part, series, or model number found on the product.
Regulatory compliance notices 68
Download from Www.Somanuals.com. All Manuals Search And Download.
Modifications
The FCC requires the user to be notified that any changes or modifications made to this device that are
not expressly approved by Hewlett-Packard Company may void the user’s authority to operate the
equipment.
Cables
Connections to this device must be made with shielded cables with metallic RFI/EMI connector hoods in
order to maintain compliance with FCC Rules and Regulations.
Canadian notice (Avis Canadien)
Class A equipment
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe A respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
Class B equipment
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment
Regulations.
Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel
brouilleur du Canada.
European Union regulatory notice
This product complies with the following EU Directives:
•
•
Low Voltage Directive 73/23/EEC
EMC Directive 89/336/EEC
Compliance with these directives implies conformity to applicable harmonized European standards
(European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this
product or product family.
This compliance is indicated by the following conformity marking placed on the product:
This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth).
This marking is valid for EU non-harmonized Telecom products.
*Notified body number (used only if applicable—refer to the product label)
Regulatory compliance notices 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of waste equipment by users in private
households in the European Union
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and recycling of your
waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more
information about where you can drop off your waste equipment for recycling, please
contact your local city office, your household waste disposal service or the shop where you
purchased the product.
Japanese notice
BSMI notice
Regulatory compliance notices 70
Download from Www.Somanuals.com. All Manuals Search And Download.
Korean notice
Class A equipment
Class B equipment
Laser compliance
This product may be provided with an optical storage device (that is, CD or DVD drive) and/or fiber optic
transceiver. Each of these devices contains a laser that is classified as a Class 1 Laser Product in
accordance with US FDA regulations and the IEC 60825-1. The product does not emit hazardous laser
radiation.
Each laser product complies with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to Laser
Notice No. 50, dated May 27, 2001; and with IEC 60825-1:1993/A2:2001.
WARNING: Use of controls or adjustments or performance of procedures other than
those specified herein or in the laser product's installation guide may result in hazardous
radiation exposure. To reduce the risk of exposure to hazardous radiation:
•
•
•
Do not try to open the module enclosure. There are no user-serviceable components
inside.
Do not operate controls, make adjustments, or perform procedures to the laser device
other than those specified herein.
Allow only HP Authorized Service technicians to repair the unit.
The Center for Devices and Radiological Health (CDRH) of the U.S. Food and Drug Administration
implemented regulations for laser products on August 2, 1976. These regulations apply to laser products
manufactured from August 1, 1976. Compliance is mandatory for products marketed in the United States.
Battery replacement notice
WARNING: The computer contains an internal lithium manganese dioxide, a vanadium
pentoxide, or an alkaline battery pack. A risk of fire and burns exists if the battery pack
is not properly handled. To reduce the risk of personal injury:
Regulatory compliance notices 71
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
•
Do not attempt to recharge the battery.
Do not expose the battery to temperatures higher than 60°C (140°F).
Do not disassemble, crush, puncture, short external contacts, or dispose of in fire or
water.
Batteries, battery packs, and accumulators should not be disposed of together with the
general household waste. To forward them to recycling or proper disposal, please use
the public collection system or return them to HP, an authorized HP Partner, or their
agents.
For more information about battery replacement or proper disposal, contact an authorized reseller or an
authorized service provider.
Taiwan battery recycling notice
The Taiwan EPA requires dry battery manufacturing or importing firms in accordance with Article 15 of
the Waste Disposal Act to indicate the recovery marks on the batteries used in sales, giveaway or
promotion. Contact a qualified Taiwanese recycler for proper battery disposal.
Regulatory compliance notices 72
Download from Www.Somanuals.com. All Manuals Search And Download.
Electrostatic discharge
In this section
Preventing electrostatic discharge............................................................................................................. 73
Grounding methods to prevent electrostatic discharge ................................................................................ 73
Preventing electrostatic discharge
To prevent damaging the system, be aware of the precautions you need to follow when setting up the
system or handling parts. A discharge of static electricity from a finger or other conductor may damage
system boards or other static-sensitive devices. This type of damage may reduce the life expectancy of the
device.
To prevent electrostatic damage:
•
•
•
•
•
Avoid hand contact by transporting and storing products in static-safe containers.
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
Place parts on a grounded surface before removing them from their containers.
Avoid touching pins, leads, or circuitry.
Always be properly grounded when touching a static-sensitive component or assembly.
Grounding methods to prevent electrostatic discharge
Several methods are used for grounding. Use one or more of the following methods when handling or
installing electrostatic-sensitive parts:
•
Use a wrist strap connected by a ground cord to a grounded workstation or computer chassis. Wrist
straps are flexible straps with a minimum of 1 megohm 10 percent resistance in the ground cords.
To provide proper ground, wear the strap snug against the skin.
•
Use heel straps, toe straps, or boot straps at standing workstations. Wear the straps on both feet
when standing on conductive floors or dissipating floor mats.
•
•
Use conductive field service tools.
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized reseller
install the part.
For more information on static electricity or assistance with product installation, contact an authorized
reseller.
Electrostatic discharge 73
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
In this section
Environmental specifications.................................................................................................................... 74
Server blade specifications...................................................................................................................... 74
Environmental specifications
Specification
Temperature range*
Operating
Value
10°C to 35°C (50°F to 95°F)
-40°C to 60°C (-40°F to 140°F)
-20°C to 60°C (-4 to 140°C)
Shipping
Storage
Maximum wet bulb temperature 30°C (86°F)
Relative humidity
(noncondensing)**
Operating
Shipping
Storage
10% to 90%
10% to 90%
10% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1,000 ft) to
3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048m (10,000 ft) or 70
Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude maximum for
storage corresponds to a pressure minimum of 70 KPa.
Server blade specifications
Specification
Height
Value
5.56 cm (2.19 in)
50.95 cm (20.06 in)
18.16 cm (7.15 in)
5.9 kg (13.00 lb)
5.33 kg (11.75 lb)
Depth
Width
Weight (maximum)
Weight (no drives installed)
Specifications 74
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical support
In this section
Before you contact HP............................................................................................................................. 75
HP contact information............................................................................................................................ 75
Customer Self Repair .............................................................................................................................. 75
Before you contact HP
Be sure to have the following information available before you call HP:
•
•
•
•
•
•
•
Technical support registration number (if applicable)
Product serial number
Product model name and number
Applicable error messages
Add-on boards or hardware
Third-party hardware or software
Operating system type and revision level
HP contact information
For the name of the nearest HP authorized reseller:
•
•
In other locations, see the Contact HP worldwide (in English) webpage
For HP technical support:
•
In the United States, for contact options see the Contact HP United States webpage
•
Call 1-800-HP-INVENT (1-800-474-6836). This service is available 24 hours a day, 7 days a
week. For continuous quality improvement, calls may be recorded or monitored.
•
If you have purchased a Care Pack (service upgrade), call 1-800-633-3600. For more
•
In other locations, see the Contact HP worldwide (in English) webpage
Customer Self Repair
HP products are designed with many Customer Self Repair (CSR) parts to minimize repair time and allow
for greater flexibility in performing defective parts replacement. If during the diagnosis period HP (or HP
service providers or service partners) identifies that the repair can be accomplished by the use of a CSR
part, HP will ship that part directly to you for replacement. There are two categories of CSR parts:
Technical support 75
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Mandatory—Parts for which customer self repair is mandatory. If you request HP to replace these
parts, you will be charged for the travel and labor costs of this service.
Optional—Parts for which customer self repair is optional. These parts are also designed for
customer self repair. If, however, you require that HP replace them for you, there may or may not be
additional charges, depending on the type of warranty service designated for your product.
NOTE: Some HP parts are not designed for customer self repair. In order to satisfy the customer
warranty, HP requires that an authorized service provider replace the part. These parts are identified as
"No" in the Illustrated Parts Catalog.
Based on availability and where geography permits, CSR parts will be shipped for next business day
delivery. Same day or four-hour delivery may be offered at an additional charge where geography
permits. If assistance is required, you can call the HP Technical Support Center and a technician will help
you over the telephone. HP specifies in the materials shipped with a replacement CSR part whether a
defective part must be returned to HP. In cases where it is required to return the defective part to HP, you
must ship the defective part back to HP within a defined period of time, normally five (5) business days.
The defective part must be returned with the associated documentation in the provided shipping material.
Failure to return the defective part may result in HP billing you for the replacement. With a customer self
repair, HP will pay all shipping and part return costs and determine the courier/carrier to be used.
For more information about HP's Customer Self Repair program, contact your local service provider. For
Réparation par le client (CSR)
Les produits HP comportent de nombreuses pièces CSR (Customer Self Repair = réparation par le client)
afin de minimiser les délais de réparation et faciliter le remplacement des pièces défectueuses. Si pendant
la période de diagnostic, HP (ou ses partenaires ou mainteneurs agréés) détermine que la réparation peut
être effectuée à l'aide d'une pièce CSR, HP vous l'envoie directement. Il existe deux catégories de pièces
CSR:
•
Obligatoire - Pièces pour lesquelles la réparation par le client est obligatoire. Si vous demandez à
HP de remplacer ces pièces, les coûts de déplacement et main d'œuvre du service vous seront
facturés.
•
Facultatif - Pièces pour lesquelles la réparation par le client est facultative. Ces pièces sont
également conçues pour permettre au client d'effectuer lui-même la réparation. Toutefois, si vous
demandez à HP de remplacer ces pièces, l'intervention peut ou non vous être facturée, selon le type
de garantie applicable à votre produit.
REMARQUE: Certaines pièces HP ne sont pas conçues pour permettre au client d'effectuer lui-même la
réparation. Pour que la garantie puisse s'appliquer, HP exige que le remplacement de la pièce soit
effectué par un Mainteneur Agréé. Ces pièces sont identifiées par la mention "Non" dans le Catalogue
illustré.
Les pièces CSR sont livrées le jour ouvré suivant, dans la limite des stocks disponibles et selon votre
situation géographique. Si votre situation géographique le permet et que vous demandez une livraison le
jour même ou dans les 4 heures, celle-ci vous sera facturée. Pour bénéficier d'une assistance
téléphonique, appelez le Centre d'assistance technique HP. Dans les documents envoyés avec la pièce de
rechange CSR, HP précise s'il est nécessaire de lui retourner la pièce défectueuse. Si c'est le cas, vous
devez le faire dans le délai indiqué, généralement cinq (5) jours ouvrés. La pièce et sa documentation
doivent être retournées dans l'emballage fourni. Si vous ne retournez pas la pièce défectueuse, HP se
réserve le droit de vous facturer les coûts de remplacement. Dans le cas d'une pièce CSR, HP supporte
l'ensemble des frais d'expédition et de retour, et détermine la société de courses ou le transporteur à
utiliser.
Technical support 76
Download from Www.Somanuals.com. All Manuals Search And Download.
Pour plus d'informations sur le programme CSR de HP, contactez votre Mainteneur Agrée local. Pour plus
d'informations sur ce programme en Amérique du Nord, consultez le site Web HP
Riparazione da parte del cliente
Per abbreviare i tempi di riparazione e garantire una maggiore flessibilità nella sostituzione di parti
difettose, i prodotti HP sono realizzati con numerosi componenti che possono essere riparati direttamente
dal cliente (CSR, Customer Self Repair). Se in fase di diagnostica HP (o un centro di servizi o di
assistenza HP) identifica il guasto come riparabile mediante un ricambio CSR, HP lo spedirà direttamente
al cliente per la sostituzione. Vi sono due categorie di parti CSR:
•
Obbligatorie – Parti che devono essere necessariamente riparate dal cliente. Se il cliente ne affida
la riparazione ad HP, deve sostenere le spese di spedizione e di manodopera per il servizio.
•
Opzionali – Parti la cui riparazione da parte del cliente è facoltativa. Si tratta comunque di
componenti progettati per questo scopo. Se tuttavia il cliente ne richiede la sostituzione ad HP,
potrebbe dover sostenere spese addizionali a seconda del tipo di garanzia previsto per il prodotto.
NOTA: alcuni componenti HP non sono progettati per la riparazione da parte del cliente. Per rispettare
la garanzia, HP richiede che queste parti siano sostituite da un centro di assistenza autorizzato. Tali parti
sono identificate da un "No" nel Catalogo illustrato dei componenti.
In base alla disponibilità e alla località geografica, le parti CSR vengono spedite con consegna entro il
giorno lavorativo seguente. La consegna nel giorno stesso o entro quattro ore è offerta con un
supplemento di costo solo in alcune zone. In caso di necessità si può richiedere l'assistenza telefonica di
un addetto del centro di supporto tecnico HP. Nel materiale fornito con una parte di ricambio CSR, HP
specifica se il cliente deve restituire dei componenti. Qualora sia richiesta la resa ad HP del componente
difettoso, lo si deve spedire ad HP entro un determinato periodo di tempo, generalmente cinque (5) giorni
lavorativi. Il componente difettoso deve essere restituito con la documentazione associata nell'imballo di
spedizione fornito. La mancata restituzione del componente può comportare la fatturazione del ricambio
da parte di HP. Nel caso di riparazione da parte del cliente, HP sostiene tutte le spese di spedizione e
resa e sceglie il corriere/vettore da utilizzare.
Per ulteriori informazioni sul programma CSR di HP contattare il centro di assistenza di zona. Per il
Customer Self Repair
HP Produkte enthalten viele CSR-Teile (Customer Self Repair), um Reparaturzeiten zu minimieren und
höhere Flexibilität beim Austausch defekter Bauteile zu ermöglichen. Wenn HP (oder ein HP
Servicepartner) bei der Diagnose feststellt, dass das Produkt mithilfe eines CSR-Teils repariert werden
kann, sendet Ihnen HP dieses Bauteil zum Austausch direkt zu. CSR-Teile werden in zwei Kategorien
unterteilt:
•
Zwingend – Teile, für die das Customer Self Repair-Verfahren zwingend vorgegeben ist. Wenn Sie
den Austausch dieser Teile von HP vornehmen lassen, werden Ihnen die Anfahrt- und Arbeitskosten
für diesen Service berechnet.
•
Optional – Teile, für die das Customer Self Repair-Verfahren optional ist. Diese Teile sind auch für
Customer Self Repair ausgelegt. Wenn Sie jedoch den Austausch dieser Teile von HP vornehmen
lassen möchten, können bei diesem Service je nach den für Ihr Produkt vorgesehenen
Garantiebedingungen zusätzliche Kosten anfallen.
HINWEIS: Einige Teile sind nicht für Customer Self Repair ausgelegt. Um den Garantieanspruch des
Kunden zu erfüllen, muss das Teil von einem HP Servicepartner ersetzt werden. Im illustrierten Teilekatalog
sind diese Teile mit „No“ bzw. „Nein“ gekennzeichnet.
Technical support 77
Download from Www.Somanuals.com. All Manuals Search And Download.
CSR-Teile werden abhängig von der Verfügbarkeit und vom Lieferziel am folgenden Geschäftstag
geliefert. Für bestimmte Standorte ist eine Lieferung am selben Tag oder innerhalb von vier Stunden gegen
einen Aufpreis verfügbar. Wenn Sie Hilfe benötigen, können Sie das HP technische Support Center
anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien, die mit einem CSR-
Ersatzteil geliefert werden, können Sie entnehmen, ob das defekte Teil an HP zurückgeschickt werden
muss. Wenn es erforderlich ist, das defekte Teil an HP zurückzuschicken, müssen Sie dies innerhalb eines
vorgegebenen Zeitraums tun, in der Regel innerhalb von fünf (5) Geschäftstagen. Das defekte Teil muss
mit der zugehörigen Dokumentation in der Verpackung zurückgeschickt werden, die im Lieferumfang
enthalten ist. Wenn Sie das defekte Teil nicht zurückschicken, kann HP Ihnen das Ersatzteil in Rechnung
stellen. Im Falle von Customer Self Repair kommt HP für alle Kosten für die Lieferung und Rücksendung auf
und bestimmt den Kurier-/Frachtdienst.
Weitere Informationen über das HP Customer Self Repair Programm erhalten Sie von Ihrem Servicepartner
vor Ort. Informationen über das CSR-Programm in Nordamerika finden Sie auf der HP Website unter
Reparaciones del propio cliente
Los productos de HP incluyen muchos componentes que el propio usuario puede reemplazar (Customer
Self Repair, CSR) para minimizar el tiempo de reparación y ofrecer una mayor flexibilidad a la hora de
realizar sustituciones de componentes defectuosos. Si, durante la fase de diagnóstico, HP (o los
proveedores o socios de servicio de HP) identifica que una reparación puede llevarse a cabo mediante el
uso de un componente CSR, HP le enviará dicho componente directamente para que realice su
sustitución. Los componentes CSR se clasifican en dos categorías:
•
Obligatorio: componentes para los que la reparación por parte del usuario es obligatoria. Si
solicita a HP que realice la sustitución de estos componentes, tendrá que hacerse cargo de los
gastos de desplazamiento y de mano de obra de dicho servicio.
•
Opcional: componentes para los que la reparación por parte del usuario es opcional. Estos
componentes también están diseñados para que puedan ser reparados por el usuario. Sin embargo,
si precisa que HP realice su sustitución, puede o no conllevar costes adicionales, dependiendo del
tipo de servicio de garantía correspondiente al producto.
NOTA: Algunos componentes no están diseñados para que puedan ser reparados por el usuario. Para
que el usuario haga valer su garantía, HP pone como condición que un proveedor de servicios
autorizado realice la sustitución de estos componentes. Dichos componentes se identifican con la palabra
"No" en el catálogo ilustrado de componentes.
Según la disponibilidad y la situación geográfica, los componentes CSR se enviarán para que lleguen a
su destino al siguiente día laborable. Si la situación geográfica lo permite, se puede solicitar la entrega
en el mismo día o en cuatro horas con un coste adicional. Si precisa asistencia técnica, puede llamar al
Centro de asistencia técnica de HP y recibirá ayuda telefónica por parte de un técnico. Con el envío de
materiales para la sustitución de componentes CSR, HP especificará si los componentes defectuosos
deberán devolverse a HP. En aquellos casos en los que sea necesario devolver algún componente a HP,
deberá hacerlo en el periodo de tiempo especificado, normalmente cinco días laborables. Los
componentes defectuosos deberán devolverse con toda la documentación relacionada y con el embalaje
de envío. Si no enviara el componente defectuoso requerido, HP podrá cobrarle por el de sustitución. En
el caso de todas sustituciones que lleve a cabo el cliente, HP se hará cargo de todos los gastos de envío
y devolución de componentes y escogerá la empresa de transporte que se utilice para dicho servicio.
Para obtener más información acerca del programa de Reparaciones del propio cliente de HP, póngase
en contacto con su proveedor de servicios local. Si está interesado en el programa para Norteamérica,
Technical support 78
Download from Www.Somanuals.com. All Manuals Search And Download.
Customer Self Repair
Veel onderdelen in HP producten zijn door de klant zelf te repareren, waardoor de reparatieduur tot een
minimum beperkt kan blijven en de flexibiliteit in het vervangen van defecte onderdelen groter is. Deze
onderdelen worden CSR-onderdelen (Customer Self Repair) genoemd. Als HP (of een HP Service Partner)
bij de diagnose vaststelt dat de reparatie kan worden uitgevoerd met een CSR-onderdeel, verzendt HP
dat onderdeel rechtstreeks naar u, zodat u het defecte onderdeel daarmee kunt vervangen. Er zijn twee
categorieën CSR-onderdelen:
•
Verplicht: Onderdelen waarvoor reparatie door de klant verplicht is. Als u HP verzoekt deze
onderdelen voor u te vervangen, worden u voor deze service reiskosten en arbeidsloon in rekening
gebracht.
•
Optioneel: Onderdelen waarvoor reparatie door de klant optioneel is. Ook deze onderdelen zijn
ontworpen voor reparatie door de klant. Als u echter HP verzoekt deze onderdelen voor u te
vervangen, kunnen daarvoor extra kosten in rekening worden gebracht, afhankelijk van het type
garantieservice voor het product.
OPMERKING: Sommige HP onderdelen zijn niet ontwikkeld voor reparatie door de klant. In verband
met de garantievoorwaarden moet het onderdeel door een geautoriseerde Service Partner worden
vervangen. Deze onderdelen worden in de geïllustreerde onderdelencatalogus aangemerkt met "Nee".
Afhankelijk van de leverbaarheid en de locatie worden CSR-onderdelen verzonden voor levering op de
eerstvolgende werkdag. Levering op dezelfde dag of binnen vier uur kan tegen meerkosten worden
aangeboden, indien dit mogelijk is gezien de locatie. Indien assistentie gewenst is, belt u een HP Service
Partner om via de telefoon technische ondersteuning te ontvangen. HP vermeldt in de documentatie bij het
vervangende CSR-onderdeel of het defecte onderdeel aan HP moet worden geretourneerd. Als het defecte
onderdeel aan HP moet worden teruggezonden, moet u het defecte onderdeel binnen een bepaalde
periode, gewoonlijk vijf (5) werkdagen, retourneren aan HP. Het defecte onderdeel moet met de
bijbehorende documentatie worden geretourneerd in het meegeleverde verpakkingsmateriaal. Als u het
defecte onderdeel niet terugzendt, kan HP u voor het vervangende onderdeel kosten in rekening brengen.
Bij reparatie door de klant betaalt HP alle verzendkosten voor het vervangende en geretourneerde
onderdeel en kiest HP zelf welke koerier/transportonderneming hiervoor wordt gebruikt.
Neem contact op met een Service Partner voor meer informatie over het Customer Self Repair programma
van HP. Informatie over Service Partners vindt u op de HP website
Reparo feito pelo cliente
Os produtos da HP são projetados com muitas peças para reparo feito pelo cliente (CSR) de modo a
minimizar o tempo de reparo e permitir maior flexibilidade na substituição de peças com defeito. Se,
durante o período de diagnóstico, a HP (ou fornecedores/parceiros de serviço da HP) concluir que o
reparo pode ser efetuado pelo uso de uma peça CSR, a peça de reposição será enviada diretamente ao
cliente. Existem duas categorias de peças CSR:
•
Obrigatória – Peças cujo reparo feito pelo cliente é obrigatório. Se desejar que a HP substitua
essas peças, serão cobradas as despesas de transporte e mão-de-obra do serviço.
•
Opcional – Peças cujo reparo feito pelo cliente é opcional. Essas peças também são projetadas
para o reparo feito pelo cliente. No entanto, se desejar que a HP as substitua, pode haver ou não a
cobrança de taxa adicional, dependendo do tipo de serviço de garantia destinado ao produto.
OBSERVAÇÃO: Algumas peças da HP não são projetadas para o reparo feito pelo cliente. A fim de
cumprir a garantia do cliente, a HP exige que um técnico autorizado substitua a peça. Essas peças estão
identificadas com a marca "No" (Não), no catálogo de peças ilustrado.
Technical support 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Conforme a disponibilidade e o local geográfico, as peças CSR serão enviadas no primeiro dia útil após
o pedido. Onde as condições geográficas permitirem, a entrega no mesmo dia ou em quatro horas pode
ser feita mediante uma taxa adicional. Se precisar de auxílio, entre em contato com o Centro de suporte
técnico da HP para que um técnico o ajude por telefone. A HP especifica nos materiais fornecidos com a
peça CSR de reposição se a peça com defeito deve ser devolvida à HP. Nos casos em que isso for
necessário, é preciso enviar a peça com defeito à HP dentro do período determinado, normalmente
cinco (5) dias úteis. A peça com defeito deve ser enviada com a documentação correspondente no
material de transporte fornecido. Caso não o faça, a HP poderá cobrar a reposição. Para as peças de
reparo feito pelo cliente, a HP paga todas as despesas de transporte e de devolução da peça e
determina a transportadora/serviço postal a ser utilizado.
Para obter mais informações sobre o programa de reparo feito pelo cliente da HP, entre em contato com
o fornecedor de serviços local. Para o programa norte-americano, visite o site da HP
Technical support 80
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical support 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical support 82
Download from Www.Somanuals.com. All Manuals Search And Download.
Acronyms and abbreviations
ABEND
abnormal end
ACU
Array Configuration Utility
ADU
Array Diagnostics Utility
AMP
Advanced Memory Protection
ASR
Automatic Server Recovery
BBWC
battery-backed write cache
BIOS
Basic Input/Output System
CSR
Customer Self Repair
DHCP
Dynamic Host Configuration Protocol
DIMM
dual inline memory module
FC
Fibre Channel
iLO 2
Integrated Lights-Out 2
Acronyms and abbreviations 83
Download from Www.Somanuals.com. All Manuals Search And Download.
IML
Integrated Management Log
NBP
Network Bootstrap Program
ORCA
Option ROM Configuration for Arrays
PCIe
peripheral component interconnect express
POST
Power-On Self Test
PXE
Preboot Execution Environment
RBSU
ROM-Based Setup Utility
SAS
serial attached SCSI
SATA
serial ATA
SIM
Systems Insight Manager
UID
unit identification
USB
universal serial bus
VCA
Version Control Agent
VCRM
Version Control Repository Manager
Acronyms and abbreviations 84
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
A
E
electrostatic discharge 73
error messages 64
ACU (Array Configuration Utility) 42
ADU (Array Diagnostic Utility) 48
F
B
features 6
Federal Communications Commission (FCC)
front panel components 6
BBWC (battery-backed write cache) 29
beep codes 64
BIOS upgrade 44
G
general diagnosis flowchart 56
C
H
hard drive bays 6
configuration of system 41
configuration tools 41
connectors 6
creating a disk image 40
CSR (customer self repair) 75
hard drives, determining status of 8
hardware options installation 19
HP Insight Diagnostics 47
HP Technical Support 75
D
Declaration of Conformity 68
diagnostics utility 47
DIMM slot locations 10
I
Important Safety Information document 52
Insight Diagnostics 47
Index 85
Download from Www.Somanuals.com. All Manuals Search And Download.
installing hardware 19
Integrated Management Log (IML) 48
internal USB connector 47
R
RBSU configuration 41
redundant ROM 46
J
release button 6
K
Korean notices 71
L
resources, troubleshooting 51
ROM redundancy 46
ROM, updating 50
loose connections 54
S
safety considerations 52
safety information 47
M
scripted installation 38
mezzanine board connectors 9
mezzanine card 27
serial number 43
O
service notifications 54
SmartStart, overview 41
specifications 74
specifications, environmental 74
specifications, server 74
start diagnosis flowchart 55
static electricity 73
supported operating systems 50
symbols on equipment 52
system board battery 71
system board components 9
operating systems 50
ORCA (Option ROM Configuration for Arrays) 44
OS boot problems flowchart 60
P
POST error messages 64
POST problems flowchart 59
Power On/Standby button 6
power-on problems flowchart 57
processor socket 9
Index 86
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Greenheck Fan Ventilation Hood SMDR 501 User Manual
Grizzly Saw H0599 User Manual
Hamilton Electronics CD Player KIDS CD20 User Manual
Harbor Freight Tools Outdoor Fountain 90326 User Manual
Harbor Freight Tools Paint Sprayer 65040 User Manual
Hearth and Home Technologies Indoor Fireplace SL 550TR E User Manual
Hotpoint Video Game Controller CIB6441 CE User Manual
Hotpoint Washer WML 520 P G A K User Manual
Humminbird Router M 12VE User Manual
Husqvarna Cordless Drill ES PT GB GR User Manual