HP Scanjet Enterprise N9120/Flow
N9120
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Load original documents......................................................................................................................................................5
Scan from ISIS- or TWAIN-compliant scanning software.............................................................................................10
Filter out color from a document (color dropout)................................................................................................................12
Set the background color for scans from the automatic document feeder.........................................................................13
Scan without reviewing.......................................................................................................................................................14
Test the imprinter..........................................................................................................................................................16
Use the imprinter..........................................................................................................................................................17
Clean the scanner glass.....................................................................................................................................................21
Installation troubleshooting.................................................................................................................................................25
Scanner operation problems..............................................................................................................................................26
Scanner does not scan right away...............................................................................................................................27
Scanned pages are out of order at the scan destination..............................................................................................27
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Scanned images are not straight..................................................................................................................................28
Scanned images contain streaks or scratches.............................................................................................................28
Scan files are too large.................................................................................................................................................29
The imprinter is not printing or the print quality is poor................................................................................................29
Scanner buttons are not working correctly.........................................................................................................................30
Wrong profile is used when the Scan button is pressed..............................................................................................30
Automatic document feeder problems................................................................................................................................31
The bottom of the scanned image is cut off.................................................................................................................33
Additional troubleshooting information...............................................................................................................................34
Getting assistance..............................................................................................................................................................35
Regulatory information and product specifications..................................................................................................36
Accessibility...................................................................................................................................................................39
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Use the scanner
•
•
•
•
•
•
Scanner overview
1
2
3
4
5
6
Front panel
Automatic document feeder (ADF)
ADF input tray
ADF output tray
Latch for opening the ADF
Power switch
See also
•
•
Scanner front panel buttons
Use the buttons on the scanner front panel to start a scan and to configure some scanner settings.
Use the scanner
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Icon
1
Button name
Copy
Description
By default, print the number of copies currently configured in
HP Document Copy.
Alternatively, start the scanning software that is assigned to
this button.
2
Scan
By default, start a scan that uses the HP Smart Document
Scan Software profile that is assigned to this button.
Alternatively, start the scanning software that is assigned to
this button.
3
4
Cancel
Tools
Cancel a scan or copy in progress.
Open the HP Scanner Tools Utility where you can do the
following tasks:
Associate the scanner quick start buttons with
scanning software
•
Configure the buttons on the scanner front panel
Manage the imprinter
•
•
•
View information about scanner settings, status, and
maintenance
5
6
Attention LED
Power Save
The Attention LED provides status information about the
scanner.
Press the Power Save button to put the scanner in Power
Save mode when you are not using the scanner. When you
are ready to begin scanning again, press the Power Save
button to wake up the scanner.
See also
•
Scanner lamp setting
The scanner supports two modes of lamp operation:
•
In Power Save mode, the scanner lamp times out and turns off automatically after about 15 minutes of
inactivity. When you are ready to begin scanning again, press the Power Save button to wake up the
scanner.
•
In Instant Lamp On mode, the scanner lamp times out and turns off automatically after about 15 minutes of
inactivity, but it remains warm and ready to scan.
To switch from Power Save mode to Instant Lamp On mode, select the Enable Instant Lamp On check box on
the Buttons tab of the HP Scanner Tools Utility. To switch back to Power Save mode, clear the Enable Instant
Lamp On check box.
4
Use the scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
Load original documents
You can scan up to 200 single- and double-sided document pages from the automatic document feeder (ADF),
and you can scan one side of a document directly from the scanner glass.
The section contains the following topics:
•
•
Use the automatic document feeder
For helpful information on loading your documents properly, refer to the following topics.
•
•
Document loading tips
• The automatic document feeder (ADF) supports the following paper types.
Width:
70–300 mm (2.75–11.8 in)
148–864 mm (5.8–34 in)
49–120 g/m2 (13–32 lb)
Length:
Weight:
NOTE: In the scanning software, set the page size to match the width and length of the paper that you
are scanning.
•
Scanning the following types of documents might result in paper jams or damage to the documents. To
scan these documents, make a photocopy, and then scan the copy instead.
Wrinkled or creased
documents
Curled documents
Torn documents
Carbon paper
Documents with paper clips or
staples
Coated paper
Extremely thin, translucent
paper
Paper with adhesive notes or
flags attached
Photos
Overhead transparencies
Papers that are stuck together
Paper with wet substances
such as glue or correction fluid
•
•
•
Before loading documents, make sure that the ADF access doors are securely latched.
When loading a stack of documents, make sure that all of the documents are the same size.
The maximum capacity of the ADF is 200 sheets of 75 g/m2 (20 lb) paper. When using heavier paper, the
maximum capacity is decreased. Use the fill line, shown below, as a guide for the maximum height of the
document stack.
Load original documents
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
•
For small or narrow documents, load the edge that is less than 148 mm (5.8 in) pointing into the feeder so
that the longer edge can be pulled into the feeder and passed along by the feed rollers.
•
•
When loading small or lightweight documents, such as A6 cards (index cards) or U.S. check carbons, load a
stack of at least five documents to ensure that the ADF properly detects and feeds the stack. When
scanning fewer than five small or lightweight documents, scan the documents by placing them on the
scanner glass.
When loading long documents that hang over the end of the input tray, pull out the input tray extender (1),
and then load the documents (2).
How to load documents
1.
Flip up the paper stop in the output tray that best matches the size of the documents that you are scanning.
Select the stop position that is closest to (and beyond) the edge of your documents as they come out of the
automatic document feeder (ADF).
6
Use the scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
2.
Fan the stack of document pages to ensure that the pages do not stick together. Fan the edge that will be
pointing into the ADF in one direction, and then fan that same edge in the opposite direction.
3.
Align the edges of the documents by tapping the bottom of the stack against the table top. Rotate the stack
90 degrees and repeat.
4.
Place the stack in the middle of the input tray. Load the stack face up. For fastest scanning, load the stack
with the left edge leading into the ADF.
NOTE: In the scanning software, choose the layout setting that matches the orientation of the originals
in the ADF.
5.
Adjust the paper guides to the width of the documents. Take care not to overtighten the guides, which can
restrict paper feeding, but make sure that the paper guides touch the edges of the documents.
Load original documents
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
6.
Gently push the stack forward to trip the tray sensor.
Load an original on the scanner glass
Place items that do not meet the specifications for the automatic document feeder (ADF) directly onto the
scanner glass.
Minimum size:
Maximum size:
Any size
300 x 432 mm (11.8 x 17 in)
Place the original face down on the scanner glass, as indicated by the reference mark.
NOTE: In the scanning software, choose the layout setting that matches the orientation of the original on the
scanner glass.
8
Use the scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
How to scan
The basic steps for scanning are:
1.
2.
Load the originals.
Do one of the following:
•
Press the Scan (
) button on the scanner front panel to start scanning with the assigned software
(and profile, if appropriate).
•
On the computer, open the scanning software, and then select the ISIS or TWAIN data source. Select
the appropriate settings, and then initiate a scan.
TIP: 1 To reduce paper jams, use scan settings that specify the actual dimensions of the pages that
you are scanning.
TIP: 2 If you select duplex scanning or copying and you load the originals into the automatic document
feeder (ADF), the scanner processes both sides of a two-sided original at the same time.
See also
•
•
•
•
Associate a quick start button with scanning software
The scanner includes two quick start buttons, Scan (
) and Copy ( ). You can associate any button-aware
scanning software with each of these buttons.
To associate a quick start button with scanning software, follow these steps:
1.
2.
3.
Press the Tools ( ) button on the scanner front panel to open the HP Scanner Tools Utility. Click the
Buttons tab.
In the Program to Start drop-down list for a button, select the scanning software that you want this button
to start.
Optionally, if you selected the HP Smart Document Scan Software, in the Profile drop-down list, select a
profile.
If you do not select a profile, pressing the button starts the HP Smart Document Scan Software so that you
can choose the scan settings each time that you start a new scan.
NOTE: If you change the name of a profile that is assigned to a quick start button, update the button
information in the HP Scanner Tools Utility.
See also
•
Scan from scanning software
You can scan an image or document directly into a software program if the program is ISIS or TWAIN compliant.
Generally, the program is compliant if it has a menu option such as Acquire, Scan, Import New Object, or
Insert. If you are unsure whether the program is compliant or what the option is, see the documentation for that
program.
See also
•
•
Scan from scanning software
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1
Scan from HP Smart Document Scan Software
1.
Click Start, point to Programs or All Programs, point to HP, point to HP Smart Document Scan, and then
click HP Smart Document Scan Software.
2.
Select a profile, and then click Scan.
TIP: A description of the selected profile is displayed below the list.
Follow the onscreen instructions to complete the scan.
3.
For more information, see the HP Smart Document Scan Software Help.
Scan from ISIS- or TWAIN-compliant scanning software
1.
2.
3.
Start the scanning software, and then select the ISIS or TWAIN data source.
Select the settings that are appropriate for the documents that you are scanning.
Carry out the appropriate actions to complete the scan.
For more information, see the online help for the scanning software.
How to copy
The basic steps for copying are:
1.
2.
Load the originals.
Do one of the following:
•
Press the Copy ( ) button on the scanner front panel to print the copies with the current copy
settings.
•
Click Start, point to Programs or All Programs, point to HP, point to Scanjet, point to N9120, and
then click Document Copy.
Select print settings in the HP Document Copy dialog box.
NOTE: If you want to change the copy settings, start the copy from the HP Document Copy software.
TIP: 1 You can configure HP Document Copy to always prompt for copy settings before starting to
print. For information, see the HP Scanner Tools Utility help.
TIP: 2 If you select duplex scanning or copying and you load the originals into the automatic document
feeder (ADF), the scanner processes both sides of a two-sided original at the same time.
See also
•
•
•
10
Use the scanner
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Useful scanner features
Experienced document management professionals might be interested in the following scan features that are
available in the HP Smart Document Scan Software. Many of these features are also available from any ISIS- or
TWAIN-compliant document scanning software that allows you to modify the scan settings.
•
•
•
•
•
•
•
•
•
Work with HP Smart Document Scan Software profiles
An HP Smart Document Scan Software profile provides a fast, efficient way to select the settings for scanning
and processing document pages. You can set up profiles for use with the quick start buttons on the scanner front
panel.
Use the HP Smart Document Scan Software to set up and modify profiles. Use the HP Scanner Tools Utility to
assign a profile to a quick start button on the scanner front panel.
You can configure each profile to perform specific scanning functions that you use often. For example, if you
frequently need to scan originals at 200 dpi color to a searchable PDF file and e-mail that file to a co-worker, you
can create a profile with the necessary settings to accomplish this task.
View profiles
The HP Smart Document Scan Software includes several default profiles.
To view the existing HP Smart Document Scan Software profiles, follow these steps:
1.
Click Start, point to Programs or All Programs, point to HP, point to HP Smart Document Scan, and then
click HP Smart Document Scan Software.
2.
View the list of profiles.
Create profiles
To create an HP Smart Document Scan Software profile, follow these steps:
1.
2.
3.
Click Start, point to Programs or All Programs, point to HP, point to HP Smart Document Scan, and then
click HP Smart Document Scan Software.
Click New.
The Create New Profile dialog box is displayed.
In the Profile name box, type the name you want or accept the default name.
TIP: You might want to set up the new profile based on an existing one. To do so, select the Copy
settings from profile check box, and then select an existing profile from the list.
4.
5.
Click Continue.
The Profile Settings dialog box is displayed.
Select the settings for the profile.
For more information, see the HP Smart Document Scan Software Help.
Useful scanner features
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Automatically rotate scanned pages
By default, pages fed through the automatic document feeder (ADF) appear in the scan output in the same
orientation as the pages in the ADF input tray. The scanner can rotate the scan data to produce a different
orientation in the scan output. For example, this feature is useful when you want fast scanning of pages that have
a portrait orientation. You can load the longer edge of these pages into the ADF input tray and obtain scan output
with the shorter edge of the pages at the top of the image.
To enable scanned page rotation in an HP Smart Document Scan Software profile, follow these steps:
1.
2.
3.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
On the Layout tab of the Profile Settings dialog box, select the appropriate options for Original Layout
and ADF Feed Direction.
NOTE: In other scanning software, the options for rotating pages are on the Layout tab of the ISIS or
TWAIN Advanced Settings dialog box.
Scan extra long documents
By default, the automatic document feeder (ADF) accepts a stack of originals up to 300 x 432 mm (11.8 x 17 in).
You can choose to scan pages up to 300 x 864 mm (11.8 x 34 in) through the ADF.
To enable long-page scans in an HP Smart Document Scan Software profile, follow these steps:
1.
2.
3.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
On the Layout tab of the Profile Settings dialog box, select Custom in the Size drop-down list, and then
type the actual page dimensions, up to 300 x 864 mm (11.8 x 34 in), in the Width and Height boxes.
NOTE: 1 In other scanning software, the page size settings are on the Layout tab of the ISIS or TWAIN
Advanced Settings dialog box.
NOTE: 2 Some scanning and destination software (including the Kofax VirtualReScan driver) might not
support all of the page sizes that the scanner accepts.
NOTE: 3 HP recommends scanning long pages individually at a resolution of 300 dpi or lower.
Filter out color from a document (color dropout)
You can filter out a dark background from the image content, for example black text on green paper or red
instructions on a form. Removing colors from the scan might reduce the scan file size and improve optical
character recognition (OCR) results. You can select to filter out a color channel (red, green, or blue) or up to three
specific colors. For specific colors, the sensitivity setting controls how closely a scanned color must approximate
the specified color.
To select colors to eliminate from a scan in an HP Smart Document Scan Software profile, follow these steps:
1.
2.
3.
4.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
On the Color Dropout tab of the Properties dialog box, specify the color dropout settings.
For information about the color dropout settings, see the online help for the scanning software that you are using.
NOTE: 1 The color channel filter only applies to grayscale scans and to black and white scans. Specific color
filters apply to all color modes.
NOTE: 2 To filter out color in another scanning software, navigate to the ISIS or TWAIN Advanced Settings
dialog box. On the Color Dropout tab, specify the color dropout settings.
12
Useful scanner features
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the background color for scans from the automatic
document feeder
When you scan from the automatic document feeder (ADF), you can choose a white or black background for the
scan. When the scan background contrasts with the color at the outside edges of the document, the scanning
software is better able to distinguish the edges of the scanned document. For example, use the black background
to scan a document that is printed on white paper.
To select the scan background color in an HP Smart Document Scan Software profile, follow these steps:
1.
2.
3.
4.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
On the More tab of the Properties dialog box, select a color from the ADF Background drop-down list.
NOTE: To set the scan background color in another scanning software, navigate to the ISIS or TWAIN
Advanced Settings dialog box. On the More tab, select a color from the ADF Background drop-down list.
Use scanner hardware compression for faster scans
The scanner supports multiple levels of JPEG compression to increase the rate of data transfer from the scanner
to the scanning software on the computer. The scanner compresses the data during the scanning process. The
scanning software can uncompress the data in order to create scanned images. JPEG compression works on
grayscale and color scans.
To enable JPEG compression in an HP Smart Document Scan Software profile, follow these steps:
1.
2.
3.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
Turn on compression:
▲
On the Scan tab of the Profile Settings dialog box, select the Use scanner compression (for
optimal speed) check box.
4.
Set how much compression should be performed:
a.
b.
On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
On the More tab of the Properties dialog box, move the Scanner JPEG Compression slider to the
position that you want.
NOTE: To specify the level of JPEG compression in another application, navigate to the TWAIN or ISIS
Advanced Settings dialog box, and then move the Scanner JPEG Compression slider to the position that
you want.
Disable Misfeed (Multipick) Detection
The Misfeed (Multipick) Detection feature stops the scan or copy process if it senses that multiple pages are fed
into the scanner at one time. This feature is enabled by default.
To disable the Misfeed (Multipick) Detection feature in an HP Smart Document Scan Software profile, follow
these steps:
1.
2.
3.
4.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
On the More tab of the Properties dialog box, clear the Enable check box.
NOTE: To disable the Misfeed (Multipick) Detection feature in another scanning software, navigate to the
ISIS or TWAIN Advanced Settings dialog box. On the More tab, clear the Enable check box.
Disable Misfeed (Multipick) Detection
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
Scan without reviewing
The standard process for using the HP Smart Document Scan Software to complete your scans is as follows:
1.
2.
Scan document pages.
Review the scanned document pages in the HP Smart Document Scan Software Scan Progress Window.
Reorder, delete, and rescan pages as necessary.
3.
4.
Finish the scan by clicking Done Scanning in the Scan Progress Window.
Wait for the scanning software to process the scanned document pages according to the profile settings.
You can set up a profile that skips steps 2 and 3 of the standard process. After you select this profile, press the
Scan button on the scanner front panel or click Scan in the HP Smart Document Scan Software Main Window.
The pages will be scanned and processed without further intervention.
In order for a scan to complete automatically, the selected HP Smart Document Scan Software profile must
include the following settings:
•
•
On the Profile tab, the Display thumbnails when scanning check box must be cleared.
Additional settings on the Destination tab, such as disabling the Show Save As dialog box, might be
required depending on the profile.
Set up and use the imprinter
The scanner includes an imprinter that can print a text message and index number on the back of documents that
are fed through the automatic document feeder (ADF). An imprinter mark verifies that the document has been
scanned, and the mark can indicate when the scan occurred.
NOTE: If you are scanning two-sided pages, the imprinter mark might print over existing content on the
pages.
•
•
•
•
•
Install or replace a print cartridge in the imprinter
The scanner uses an HP 51604A print cartridge. You must purchase the print cartridge separately.
1.
Raise the ADF input tray until it clicks into place.
2.
Lift the green lever slightly, and slide the imprinter completely to the left.
14
Useful scanner features
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Raise the cartridge stall latch.
4.
5.
If you are replacing an empty print cartridge, slide it to the right to remove it from the cartridge stall.
Remove the print cartridge from its packaging. Pull the tab to remove the protective tape from the nozzles.
6.
Hold the new print cartridge with the nozzles down and slide it into the cartridge stall.
7.
Lower the cartridge stall latch to lock the print cartridge in place.
Set up and use the imprinter
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2
8.
9.
Grasp the center of the ADF input tray, and then lower the ADF input tray into position for scanning.
Update the imprinter history:
a.
Press the Tools ( ) button on the scanner front panel to open the HP Scanner Tools Utility. Click the
Imprinter tab.
b.
In the Cartridge Status section, click Record Replacement.
Position the imprinter
The position of the imprinter determines the left-right location of the imprinter mark on the scanned page.
NOTE: For narrow pages, if the imprinter is positioned outside of the width of the paper in the ADF input
tray, the imprinter is not able to print on the scanned pages. In this case, the scan does not complete and an
error message is displayed on the computer screen.
1.
Raise the ADF input tray until it clicks into place.
2.
Lift the green lever slightly, and then slide the imprinter to the position that you want.
NOTE: Several paper sizes are indicated in the imprinter carriage. If you set the imprinter at the
position for the paper size that you are using, the imprinter mark is printed about 5 mm (.2 in) from the
side of the page. You can select any position that prints on the size of the paper that you are using. If
you leave the imprinter between the marked positions, the imprinter might shift during scanning, and the
imprinter mark will be of poor quality.
3.
Grasp the center of the ADF input tray, and then lower the ADF input tray into position for scanning.
Test the imprinter
Test the imprinter to verify that the print cartridge is loaded properly and to check the placement of the imprinter
mark on the page.
NOTE: To prevent the counter value from changing during the test, the imprinter test prints a preset mark in
the configured location.
16
Useful scanner features
Download from Www.Somanuals.com. All Manuals Search And Download.
1.
2.
Place a single page in the automatic document feeder input tray.
Press the Tools ( ) button on the scanner front panel to open the HP Scanner Tools Utility. Click the
Imprinter tab.
3.
In the Cartridge Status section, click Test Imprinter.
Clean the imprinter
Clean the imprinter whenever the imprinter mark does not print completely.
1.
2.
Press the Tools ( ) button on the scanner front panel to open the HP Scanner Tools Utility. Click the
Imprinter tab.
In the Cartridge Status section, click Clean Imprinter.
Use the imprinter
1.
2.
3.
4.
5.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
On the Imprinter tab of the Properties dialog box, select Enable Imprinting.
In the Text box, enter the text to be printed on the back of each scanned document.
You can also do the following:
•
•
•
•
•
•
Set a counter for number of pages imprinted.
Include the date and time in the imprinter mark.
Specify the distance between the leading edge of the document and the beginning of the imprinter mark.
Rotate the imprinter mark.
Make the imprinter mark bold.
Disable scanning when the print cartridge is running low on ink.
Set up and use the imprinter
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Care and maintenance
This section presents information about how to care for and maintain the scanner.
•
•
•
•
•
•
Occasional cleaning of the scanner helps ensure high-quality scans. The amount of care necessary depends
upon several factors, including the amount of use and the environment. You should perform routine cleaning as
necessary.
Routine cleaning and maintenance should include cleaning the automatic document feeder (ADF), the scanner
glass, and the fan filters.
CAUTION: Avoid placing items that have sharp edges, paper clips, staples, wet glue, correction fluid, or
other substances in the scanner. Document pages should not be curled, wrinkled, or stuck together.
Order maintenance and scanning supplies
You can purchase maintenance parts online. Items such as the feed roller replacement kit are available for
worldwide delivery.
1.
2.
3.
Select your country/region, and then select your language.
Enter the scanner model number, and then press Enter.
Clean the automatic document feeder
The automatic document feeder (ADF) requires periodic maintenance depending on the amount of use and the
type of paper that is fed through it. Clean the ADF under the following conditions:
•
•
•
•
•
The ADF rollers are visibly dirty.
The ADF has trouble feeding documents.
Vertical streaks appear in images scanned by the ADF.
After scanning a document that is dusty, dirty, or has pencil writing on it through the ADF.
The environment is dusty.
If you use the ADF several times per week, monthly cleaning is recommended. Set up a cleaning routine that is
appropriate for the scanner.
1.
2.
Press the Power switch to the off position, and then disconnect the USB cable and power cable from the
scanner.
Open the scanner lid.
18
Care and maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
3.
Clean the clear scanning strip on the scanner bed. Wipe the clear area with a clean, damp, lint-free cloth.
4.
5.
Close the scanner lid.
Lift the latch on top of the ADF to open the top and side ADF access doors.
Clean the automatic document feeder
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
6.
Locate the white strip on the side ADF access door and the clear scan window inside the ADF. Wipe both of
these areas clean with a clean, damp, lint-free cloth.
7.
Wipe the ADF rollers with a clean, damp, lint-free cloth.
20
Care and maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
8.
9.
Wait several minutes for the rollers to dry, and then close the ADF access doors.
Reconnect the USB cable and power cable to the scanner, and then press the Power switch to the on
position.
Clean the scanner glass
Clean the scanner glass under the following conditions:
•
•
•
Streaks, scratches, or spots appear in images scanned from the scanner glass.
After scanning a document that is dusty or dirty from the scanner glass.
The environment is dusty.
To clean the scanner glass, follow these steps:
1.
Press the Power switch to the off position, and then disconnect the USB cable and power cable from the
scanner.
2.
3.
Open the scanner lid.
Clean the glass by using a soft, lint-free cloth that has been sprayed with a mild glass cleaner.
CAUTION: Use only glass cleaner to clean the scanner glass. Avoid cleaners that contain abrasives,
acetone, benzene, and carbon tetrachloride, all of which can damage the scanner glass. Avoid isopropyl
alcohol because it can leave streaks on the glass.
Do not spray the glass cleaner directly on the glass. If too much glass cleaner is applied, the cleaner
could leak under the glass and damage the scanner.
4.
5.
Dry the glass with a dry, soft, lint-free cloth.
Reconnect the USB cable and power cable to the scanner, and then press the Power switch to the on
position.
NOTE: If cleaning the top surface of the glass does not remove all dirt and smudges from the glass, you can
also clean the underside of the glass. Cleaning the underside of the glass requires that you disassemble the
scanner. For instructions on how to clean the underside of the scanner glass, go to www.hp.com/support.
Clean the scanner fan filters
The scanner includes two customer-accessible fan filters. These filters prevent dust and debris from entering the
fans. If the scanner is in a dirty or dusty environment, clean the filters monthly.
For each fan filter, follow these steps:
1.
Press the Power switch to the off position, and then disconnect the USB cable and power cable from the
scanner.
2.
Remove the filter cover.
3.
Clean the filter in one of the following ways:
•
•
•
Use compressed air to blow the debris off of the filter.
Use a vacuum to remove the debris from the filter.
Rinse the filter with water.
Clean the scanner fan filters
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
NOTE: If the filter is damaged, replace it with a new filter. To order a replacement part, go to
4.
5.
Inspect the filter cover. If it is dirty, use a clean, damp, lint-free cloth to remove the dirt.
Ensure that the filter and the filter cover are completely dry.
CAUTION: A wet filter can damage the scanner.
6.
Place the clean, dry filter in the filter cover, and then replace the cover on the scanner.
7.
Reconnect the USB cable and power cable to the scanner, and then press the Power switch to the on
position.
Replace the feed roller and separation pad
Replace the feed roller and separation pad under either of the following conditions:
•
Streaks on scans or paper jams occur repeatedly and cleaning the automatic document feeder does not
help.
•
The HP Scanner Tools Utility Maintenance tab indicates that maintenance is due.
The feed roller replacement kit contains a feed roller and installation instructions. The separation pad
replacement kit contains a separation pad and installation instructions. To order replacement kits, go to
1.
Press the Power switch to the off position, and then disconnect the USB cable and power cable from the
scanner.
2.
3.
Inspect and clean the two customer-accessible fan filters.
Open the top ADF access door, and then replace the feed roller and separation pad as described in the
installation instructions that were included with the replacement kits.
4.
5.
Close all ADF access doors, and then reconnect the USB cable and power cable to the scanner.
Press the Power switch to the on position, and then update the scanner maintenance history:
a.
Press the Tools ( ) button on the scanner front panel to open the HP Scanner Tools Utility. Click the
Maintenance tab.
b.
In the Feed Roller Maintenance and Separation Pad Maintenance sections, click Record
Replacement.
For more information, see the HP Scanner Tools Utility help.
See also
•
HP Scanner Tools Utility scanner maintenance
information
The Maintenance tab of the HP Scanner Tools Utility displays the scanner usage and maintenance history. You
can use this tab to record scanner maintenance.
The Imprinter tab of the HP Scanner Tools Utility displays information about the scanner imprinter and the
imprinter print cartridge. You can use this tab to record that the print cartridge has been replaced.
To open the HP Scanner Tools Utility, press the Tools button on the scanner front panel.
22
Care and maintenance
Download from Www.Somanuals.com. All Manuals Search And Download.
For detailed information on using the HP Scanner Tools Utility, see the HP Scanner Tools Utility help.
HP Scanner Tools Utility scanner maintenance information
23
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Troubleshooting
This section contains solutions for common problems with the scanner.
•
•
•
•
•
•
For additional troubleshooting, see the online help for the scanning software that you are using or visit
www.hp.com/support for updated information about the scanner.
Scanner LEDs
The scanner has two LED lights on the front panel that indicate scanner functions and error conditions. The LED
in the shape of an exclamation point (!) is the Attention LED, and the LED in the Power Save button is the Power
LED. The table below explains how to interpret the indicator LEDs.
LED indications
Scanner action or condition
Error condition. Check your computer screen for an error
message.
The Attention LED quickly
blinks amber.
The Power LED is lit with
a steady green light.
Attention condition. Check your computer screen for a
Maintenance Recommended message.
The Attention LED is lit with a
steady amber light.
The Power LED is lit with
a steady green light.
The scanner is warming up.
The Power LED is lit with
a steady green light.
The Attention LED slowly
blinks green.
The scanner is in Power Save mode.
The scanner is on and ready to scan.
The scanner is scanning an original.
There is no power to the scanner.
The Power LED is lit with
a steady, dim amber light.
The Power LED is lit with
a steady green light.
The Power LED is lit with
a steady green light.
The Attention LED blinks
green at a medium speed.
Both LEDs are off.
24
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation troubleshooting
If the scanner does not work after installation or if the scanner has stopped working correctly, you might see a
message on the computer screen that is similar to one of the following:
•
•
•
•
The scanner could not be initialized.
The scanner could not be found.
An internal error has occurred.
The computer cannot communicate with the scanner.
To fix the problem, check the scanner cables and software as described in the following sections:
•
•
•
Check that the scanner has power
The power cable is connected between the scanner and a power outlet.
•
•
Ensure that the power cable is securely connected between the scanner and a live electrical outlet.
If the power cable is connected to a surge protector, ensure that the surge protector is plugged into an
outlet and turned on.
•
Ensure that the Power switch on the right side of the scanner is in the on position.
If the problem persists after verifying the above items, try the following:
1.
2.
3.
Press the Power switch to the off position, and then disconnect the power cable from the scanner.
Wait 30 seconds.
Reconnect the power cable to the scanner, and then press the Power switch to the on position.
After 30 seconds, the Power LED is lit with a steady green light and the Attention LED is off.
Check the USB connection
Check the physical connection to the scanner.
•
•
Use the cable that was included with the scanner. Another USB cable might not be compatible with the
scanner.
Ensure that the USB cable is securely connected between the scanner and the computer or USB hub. The
trident icon on the USB cable faces up when the cable is properly connected to the scanner.
If the problem persists after verifying the above items, try the following:
1.
Do one of the following tasks depending on how the scanner is connected to the computer:
•
If the USB cable is connected to a USB hub or a docking station for a laptop, disconnect the USB
cable from the USB hub or the docking station, and then connect the USB cable directly to the
computer.
•
•
If the USB cable is directly connected to the computer, plug it into another USB port on the computer.
Remove all other USB devices from the computer except for the keyboard and the mouse.
2.
Press the Power switch to the off position, wait 30 seconds, and then press the Power switch to the on
position.
Installation troubleshooting
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
3.
4.
Restart the computer.
After the computer has restarted, try using the scanner.
If the scanner works and you changed the way it was connected to the computer in step 1, the
communication problem might involve the USB hub, the docking station, a USB port, or another USB
device. Leave the scanner directly connected to the computer. Try using the scanner after reconnecting
each additional USB device, and disconnect any USB devices that prevent the scanner from working
correctly.
If the scanner does not work, uninstall and then reinstall the HP Scanjet drivers and utilities.
Uninstall and then reinstall the HP Scanjet utilities
If checking the scanner cable connections did not solve the problem, the problem might have occurred because
of an incomplete installation. Try uninstalling and then reinstalling the HP scanning utilities.
1.
2.
Press the Power switch to the off position, and then disconnect the USB cable and power cable from the
scanner.
Use the Add/Remove tool (in Windows Vista, the Programs and Features tool) from the Control Panel to
uninstall the following items:
•
•
HP Scanjet N9120 Document ISIS/TWAIN
HP Scanjet N9120 Utilities
3.
4.
Restart the computer.
Use the HP Scanning Software CD that came with the scanner to reinstall the HP Scanjet Drivers and
Tools.
5.
Reconnect the USB cable and power cable to the scanner, and then press the Power switch to the on
position.
After 30 seconds, the Power LED is lit with a steady green light and the Attention LED is off.
Scanner operation problems
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Scanner will not turn on
If the scanner will not turn on when you press the front panel scanner buttons, verify the following:
•
•
•
Verify that power is being supplied to the scanner.
Ensure that the Power switch on the right side of the scanner is in the on position.
The scanner may have been unplugged. Check to see that the power cable has not become disconnected
from the scanner or unplugged from the power source.
Scanner lamp stays on
The scanner lamp should time out and turn off automatically after a period of inactivity (about 15 minutes).
26
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
If the scanner lamp remains on after a long period of inactivity, turn off the scanner, wait 30 seconds, and then
turn the scanner back on.
NOTE: The scanner lamp does not turn off when paper is in the automatic document feeder input tray.
Scanner does not scan right away
Make sure the power switch on the right side of the scanner is turned on.
If the scanner has not been used for a while, the scanner lamp might need to go through a warm-up period before
scanning can begin. If the scanner lamp needs to warm up, it takes a moment after starting the software or
pressing a scanner button for scanning to begin.
You can enable Instant Lamp On mode in the HP Scanner Tools Utility.
Scanner scans only one side of a double-sided page
Verify the following:
•
•
For single pass duplex scanning, scan pages through the ADF.
Select the Duplex setting in the scanning or copy software.
Scanned image is fuzzy
When scanning with the automatic document feeder (ADF), follow these steps:
1.
2.
Verify that the document original is not fuzzy.
Check for any obstructions in the scanner paper path and make sure that the paper guides are positioned
appropriately. Try another scan.
3.
If the scanned image is still of poor quality, clean the ADF.
When scanning from the scanner glass, it is important that the item you scan comes in close contact with the
scanner glass. Follow these steps:
1.
2.
3.
Verify that the document original is not fuzzy.
Check to see that the item is in full contact with the scanner glass.
If the scanned image is still of poor quality, clean the scanner glass.
See also
•
•
Scanned pages are out of order at the scan destination
Insert a multiple-page document with the printed first page of the document facing up and with the top or left edge
of the document pointing into the feeder.
See also
•
Scanned pages are missing at the scan destination
When scanning with the ADF, pages that stick together are scanned as one item. The hidden pages are not
scanned. Enable Misfeed (Multipick) Detection to stop the scan or copy process if multiple pages are fed into the
scanner at one time.
To enable the Misfeed (Multipick) Detection feature in an HP Smart Document Scan Software profile, follow these
steps:
1.
2.
Open the HP Smart Document Scan Software.
Select a scan profile, and then click Edit.
Scanner operation problems
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
3.
4.
On the Scan tab of the Profile Settings dialog box, click Advanced Settings.
On the More tab of the Properties dialog box, select the Enable check box.
Optimizing scanning and task speeds
Several settings influence the total time for a scanning job. When you want to optimize scanning performance,
consider the following information.
•
To optimize scanning speed for pages that are A4 (or Letter) size or smaller, load the pages with the long
edge feeding into the automatic document feeder (ADF). Scanning pages by loading the long edge first
minimizes the length of the media passing the scan heads, which results in faster scans.
NOTE: In the scanning software, choose the layout setting that matches the orientation of the originals
in the ADF.
•
•
To optimize data transfer from the scanner to the scanning software on the computer, enable scanner
hardware (JPEG) compression. Typically, the use of scanner compression reduces the time to complete all
color scans and grayscale scans with resolution above 300 dpi. Scanner compression affects the rate of
data transfer only and can be used with all output formats.
If you are scanning to edit text, the optical character recognition (OCR) software requires more processing
time than for non-OCR scans, which is normal. Wait for the item to scan.
NOTE: For the best OCR results, scanner compression should be set to the minimum compression
level or disabled.
•
Scanning at a higher resolution than necessary increases scanning time and creates a larger file with no
additional benefit. If you are scanning at a high resolution, set the resolution to a lower level to increase
scanning speed.
See also
•
•
•
The image is completely black or completely white
When scanning with the ADF, check the paper orientation.
When scanning from the scanner glass, the item might not be placed correctly on the scanner glass. Make sure
that the item you are trying to scan is placed face down on the glass and the lid is closed.
See also
•
Scanned images are not straight
When scanning with the automatic document feeder, make sure that the paper guides touch the edges of the
original. Make sure that all documents are of the same size.
When scanning from the scanner glass, the item might have shifted when you closed the lid. Straighten the
original on the scanner glass, and then scan again.
Scanned images contain streaks or scratches
When scanning with the automatic document feeder (ADF), follow the steps below. After each step, try another
scan to see if the streaks or scratches are still apparent. If so, try the next step.
1.
2.
3.
Check that the originals are clean and unwrinkled.
Clean the ADF or the scanner glass.
Replace the separation pad and the feed roller.
28
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
See also
•
•
•
Vertical white stripes appear on the printed page
The destination printer might be out of toner or ink. Scan a different original to the same printer to see if the issue
lies with the printer.
If the second original has the same problem, clean the automatic document feeder or the scanner glass.
See also
•
•
Scan files are too large
If the saved scans have very large file sizes, try the following:
•
Verify the scan resolution setting:
◦
◦
200 dpi is sufficient for storing documents as images.
For most fonts, 300 dpi is sufficient for using optical character recognition (OCR) to create editable
text.
◦
For Asian fonts and small fonts, 400 dpi is the recommended resolution.
Scanning at a higher resolution than necessary creates a larger file with no additional benefit.
Color scans create larger files than do black and white scans.
•
•
If you are scanning a large number of pages at one time, consider scanning fewer pages at a time to create
more, smaller files.
•
Use the Kofax VirtualReScan software to process the scanned data. Kofax VirtualReScan compresses the
data, which can result in a smaller file.
The imprinter is not printing or the print quality is poor
If you reset the ink level in the HP Scanner Tools Utility the last time that you replaced the print cartridge, you will
receive imprinter status alerts when the ink level is running low. If you did not reset the ink level at the time that
you replaced the print cartridge, you might receive erroneous imprinter status alerts or the imprinter might run out
of ink before the HP Scanner Tools Utility reports that the ink level is low.
NOTE: To use the imprinter, load originals in the automatic document feeder (ADF). The imprinter cannot
print on pages placed on the scanner glass.
To remedy other imprinter problems, try the following:
1.
2.
Verify that the Enable Imprinting check box is selected in the scanning software.
If the imprinter ink is smearing or leaving blobs of ink on the paper, remove the print cartridge, and then
gently wipe the copper contacts of the print cartridge with a clean, damp, lint-free cloth. Reinstall the print
cartridge, but do not reset the ink level in the HP Scanner Tools Utility.
3.
4.
Verify that the cartridge stall latch holds the print cartridge firmly in place.
Verify that the imprinter is positioned at one of the predefined locations that is inside the width of the paper
as it is fed through the ADF.
5.
Clean and test the imprinter:
a.
Press the Tools ( ) button on the scanner front panel to open the HP Scanner Tools Utility. Click the
Imprinter tab, and then click Clean Imprinter.
b.
c.
d.
Ensure that the ADF has at least one piece of paper in the input tray.
In the HP Scanner Tools Utility, click Test Imprinter.
If the imprinter print quality is good, continue scanning. Otherwise, replace the print cartridge.
Scanner operation problems
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
See also
•
Scanner buttons are not working correctly
•
•
•
Buttons do not work
After each step, press a button to see if it is working correctly. If the problem persists, proceed with the next step.
1.
The buttons might be disabled in the HP scanning software. Ensure that the Disable front panel buttons
setting in the HP Scanner Tools Utility is cleared.
2.
3.
4.
5.
A cable might be loose. Ensure that the USB cable and the power supply are securely connected.
Turn off the scanner, wait 30 seconds, and then turn the scanner back on.
Restart your computer.
If the problem persists, the buttons might be disabled outside of the HP scanning software. Try the following
procedure:
a.
Open Control Panel, select Scanners and Cameras, and then select your scanner model from the
list.
b.
Display the scanner properties:
•
•
Windows 2000: Click Properties.
Windows XP and Vista: Right-click your scanner model, and then click Properties.
c.
Examine the buttons setting for your scanner:
•
•
Windows 2000: Ensure that the Disable Device Events option is not selected.
Windows XP and Vista: Ensure the Take No Action option is not selected.
An unexpected program opens when a button is pressed
NOTE: The Scan and Copy button settings can be changed in the HP Scanner Tools Utility. You cannot
change the settings for the Cancel, Tools, or Power Save buttons.
After each step, press a button to see if it is working correctly. If the problem persists, proceed with the next step.
1.
2.
3.
On the Buttons tab of the HP Scanner Tools Utility, determine the associations for the Scanner Front
Panel Buttons. If necessary, change the software that is assigned to a button.
Verify that the expected program is installed on the computer by looking at the Start menu.
If necessary, install the program.
If the problem persists, the buttons might be assigned outside of the HP Scanner Tools Utility. Try the
following procedure:
a.
Open Control Panel, select Scanners and Cameras, and then select your scanner model from the
list.
b.
Display the scanner properties:
•
•
Windows 2000: Click Properties.
Windows XP and Vista: Right-click your scanner model, and then click Properties.
c.
Ensure that the Start this program option is selected and that the correct application is selected in
the drop-down list.
Wrong profile is used when the Scan button is pressed
If you are using the HP Smart Document Scan Software, use the HP Scanner Tools Utility to determine which HP
Smart Document Scan Software profile is assigned to the Scan button. If necessary, reset the profile assigned to
the button.
30
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: You can also assign an HP Smart Document Scan Software profile to the Copy button.
If you are using other scanning software, see the online help for that program.
See also
•
Automatic document feeder problems
Use this section to help resolve issues that might occur when scanning from the automatic document feeder
(ADF).
Paper jams usually result from inappropriate paper being fed into the ADF. Review the tips for using the ADF. If
misfeeds occur frequently, perform ADF maintenance.
This section contains the following topics:
•
•
•
See also
•
•
•
Clear a jam from the automatic document feeder
1.
2.
Remove any loose pages from the automatic document feeder (ADF) input tray.
Lift the latch on top of the ADF to open the top and side ADF access doors.
3.
Remove any jammed pages from the ADF input tray.
Automatic document feeder problems
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
4.
Remove any jammed pages from inside the ADF.
5.
Remove any jammed pages from the ADF output tray.
6.
If the jammed page still cannot be removed, follow these steps:
a.
b.
Open the scanner lid.
Push the green tab toward the scanner lid to open the inner ADF access door. If the door does not
open automatically, gently pry it open.
c.
Gently pull the page out of the ADF.
32
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
7.
8.
Close the inner ADF access door, and then close the scanner lid.
At the scan destination, examine the scan output to determine which page was the last to be completely
scanned.
9.
Reload the unscanned pages in the ADF input tray. If any pages are damaged, do one of the following:
•
•
•
Photocopy the damaged page, and then add the photocopy to the input stack.
Scan the damaged page from the scanner glass.
Reprint the original document.
Prepare the stack as follows:
a.
Fan the stack of document pages to ensure that the pages do not stick together. Fan the edge that will
be pointing into the feeder in one direction, and then fan that same edge in the opposite direction.
b.
Align the edges of the documents by tapping the bottom of the stack against the table top. Rotate the
stack 90 degrees and repeat.
10. Resume scanning.
Automatic document feeder does not feed paper
•
The automatic document feeder (ADF) access doors might not be securely latched. Open the ADF access
doors, and then close the doors by pressing firmly.
•
A problem with the ADF hardware might exist. Use the following procedure to test the ADF:
◦
Disconnect the USB cable and the power cable from the scanner. Check that the power cable is still
connected to the power source.
◦
◦
◦
Ensure that the ADF has at least one piece of paper in the input tray.
Reconnect the power cable to the scanner, and then turn the scanner on.
Try to scan another page through the ADF.
The bottom of the scanned image is cut off
By default, the scanner can scan paper that is up to 432 mm (17 in) long. For longer pages, the end of the
document is not included in the scanned image.
Verify that you have specified an appropriate page size in the scanning software.
See also
•
Automatic document feeder problems
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Additional troubleshooting information
For additional troubleshooting information, see the following resources:
•
•
For information about the scanning software that you are using, see the online help for that program.
To look for updated information about the scanner, visit the HP scanner support Web site at www.hp.com/
◦
◦
Select your country/region, and then select your language.
Enter the scanner model number, and then press Enter.
•
If you do not have Internet access, for support contact information, see the information about getting
assistance in the scanner getting started guide.
34
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Product care and support
This section describes the options for product support.
•
•
Maintenance, troubleshooting, and support
Occasional cleaning of the scanner helps ensure higher-quality scans. The amount of care necessary depends
upon several factors, including the amount of use and the environment. You should perform routine cleaning as
necessary.
Routine cleaning and maintenance should include cleaning the scanner glass and the automatic document feeder
(ADF).
CAUTION: Avoid placing items that have sharp edges, paper clips, staples, wet glue, correction fluid, or
other substances in the scanner. Document pages should not be curled, wrinkled, or stuck together.
Getting assistance
In order to get the best from your HP product, please consult the following standard HP support offerings:
1.
2.
Please consult the product documentation that came with the product.
Review the troubleshooting section in this manual.
HP online support is available to all HP customers. It is the fastest source for up-to-date product information
and expert assistance, including the following features:
•
•
•
•
Online chat and E-mail access to qualified support specialists
Software and driver updates for your product
Valuable product and troubleshooting information for technical issues
Proactive product updates, support alerts, and HP newsletters (available when you register your
product)
3.
HP support by phone
•
•
Support options and fees vary by product, country/region and language.
Fees and policies are subject to change without notice. Please check the web site www.hp.com/
support for the latest information.
4.
5.
Post-warranty period
After the limited warranty period, help is available online at www.hp.com/support.
Extending or upgrading your warranty
If you would like to extend or upgrade the product’s warranty, please contact your point of purchase or
6.
If you already purchased an HP Care Pack Service, please check the support conditions in your contract.
Product care and support
35
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Regulatory information and product
specifications
Scanner specifications
Name
Description
Scanner type
Size
Flatbed with automatic document feeder (ADF)
692 x 558 x 343 mm (27.3 x 22.0 x 13.5 in)
38.5 kg (85 lb)
Weight
Scanning element
Interface
Charge-coupled device (CCD)
USB 2.0 high speed (compatible with USB 1.1)
600 x 600 dpi hardware
Optical resolution
AC power
100–240V~, 50/60Hz, 1.8A
Power consumption
For power consumption information, see the regulatory_supplement.htm file on the
HP Scanning Software CD.
Energy information
country/region, and then search on Energy Star.
Automatic document feeder (ADF) specifications
Name
Description
200 sheets of 75 g/m2 (20 lb)
70 x 148 mm (2.75 x 5.8 in)
300 x 864 mm (11.8 x 34 in)
49 g/m2 (13 lb)
Paper tray capacity
Minimum paper size
Maximum paper size
Minimum paper weight
Maximum paper weight
120 g/m2 (32 lb)
Imprinter specifications
Name
Description
Print cartridge
HP 51604A
Environmental specifications
Name
Description
Temperature
Operating the scanner: 10° to 35° C (50° to 95° F)
Storage: -40° to 65° C (-40° to 149° F)
Relative humidity
Operating the scanner: 10% to 80% noncondensing 10° to 35° C (50° to 95° F)
Storage: up to 90% at 0° to 65° C (32° to 149° F)
Regulatory information
Regulatory Model Identification Number: For regulatory identification purposes your product is assigned a
Regulatory Model Number. The Regulatory Model Number for your product is FCLSD-0705. This regulatory
number should not be confused with the marketing name (HP Scanjet N9120/Flow N9120) or
36
Regulatory information and product specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
product number (L2683A/L2683B). Additional regulatory information about your scanner can be found on the
regulatory_supplement.htm file on the HP Scanning Software CD.
Materials disposal
This HP product contains the following materials that might require special handling at end-of-life:
•
Mercury in the fluorescent lamp in the scanner and/or transparent materials adapter.
Disposal of this material can be regulated because of environmental considerations. For disposal or recycling
information, please contact your local authorities or the Electronic Industries Alliance (EIA) www.eiae.org.
Disposal of Waste Equipment by Users in Private Households in the European Union
This symbol on the product or on its packaging indicates that this product must not be disposed of with your other
household waste. Instead, it is your responsibility to dispose of your waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic equipment. The separate collection
and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure
that it is recycled in a manner that protects human health and the environment. For more information about where
you can drop off your waste equipment for recycling, please contact your local city office, your household waste
disposal service or the shop where you purchased the product.
Hewlett-Packard limited warranty statement
HP Scanjet Enterprise N9120/Flow N9120
Model
Asia/Pacific
Americas
Europe/Middle East/Africa
N9120/Flow N9120
1 year
1 year
1 year
1. HP warrants to you, the end-user customer, that HP hardware, accessories, and supplies will be free from
defects in materials and workmanship after the date of purchase, for the period specified above. If HP receives
notice of such defects during the warranty period, HP will, at its option, either replace or repair products which
prove to be defective. Replacement products may be either new or equivalent in performance to new.
2. HP warrants to you that HP software will not fail to execute its programming instructions after the date of
purchase, for the period specified above, due to defects in material and workmanship when properly installed and
used. If HP receives notice of such defects during the warranty period, HP will replace software which does not
execute its programming instructions due to such defects.
3. HP does not warrant that the operation of HP products will be uninterrupted or error free. If HP is unable, within
a reasonable time, to repair or replace any product to a condition as warranted, you will be entitled to a refund of
the purchase price upon prompt return of the product.
4. HP products may contain remanufactured parts equivalent to new in performance or may have been subject to
incidental use.
5. This warranty does not apply to defects resulting from (a) improper or inadequate maintenance or calibration,
(b) software, interfacing, parts, or supplies not supplied by HP, (c) unauthorized modification or misuse, (d)
operation outside of the published environmental specifications for the product, or (e) improper site preparation or
maintenance.
6. TO THE EXTENT ALLOWED BY LOCAL LAW, THE ABOVE WARRANTIES ARE EXCLUSIVE AND NO
OTHER WARRANTY OR CONDITION, WHETHER WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED, AND
HP SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY,
SATISFACTORY QUALITY, AND FITNESS FOR A PARTICULAR PURPOSE. Some countries/regions, states,
or provinces do not allow limitations on the duration of an implied warranty, so the above limitation or exclusion
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
might not apply to you. This warranty gives you specific legal rights, and you might also have other rights that
vary from country/region to country/region, state to state, or province to province.
7. HP's limited warranty is valid in any country/region or locality where HP has a support presence for this product
and where HP has marketed this product. The level of warranty service you receive may vary according to local
standards. HP will not alter the form, fit, or function of the product to make it operate in a country/region in which
it was never intended to function for legal or regulatory reasons.
8. TO THE EXTENT ALLOWED BY LOCAL LAW, THE REMEDIES IN THIS WARRANTY STATEMENT ARE
YOUR SOLE AND EXCLUSIVE REMEDIES. EXCEPT AS INDICATED ABOVE, IN NO EVENT WILL HP OR ITS
SUPPLIERS BE LIABLE FOR LOSS OF DATA OR FOR DIRECT, SPECIAL, INCIDENTAL, CONSEQUENTIAL
(INCLUDING LOST PROFIT OR DATA), OR OTHER DAMAGE, WHETHER BASED IN CONTRACT, TORT, OR
OTHERWISE. Some countries/regions, states, or provinces do not allow the exclusion or limitation of incidental
or consequential damages, so the above limitation or exclusion may not apply to you.
9. THE WARRANTY TERMS CONTAINED IN THIS STATEMENT, EXCEPT TO THE EXTENT LAWFULLY
PERMITTED, DO NOT EXCLUDE, RESTRICT, OR MODIFY AND ARE IN ADDITION TO THE MANDATORY
STATUTORY RIGHTS APPLICABLE TO THE SALE OF THIS PRODUCT TO YOU.
HP Scanjet Enterprise N9120/Flow N9120
38
Regulatory information and product specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Accessibility
Accessibility features
•
•
LED Reader
The LED Reader is software that outputs the status of the indicator LEDs on the scanner front panel to the
computer monitor as the LEDs change. The LED Reader enables accessibility software tools to express what is
being shown on the scanner front panel.
To use the LED Reader, follow these steps:
1.
2.
On your hard drive, navigate to the C:\Program Files\Common Files\Hewlett-Packard\Scanjet\9120\
directory.
To start the program, double-click hpled.exe.
NOTE: The LED Reader is not able to display the LED indications when there is a USB connection error or
the scanner is off.
See also
•
Control of the scanner buttons
To prevent buttons from being pushed accidentally, you can disable the buttons on the scanner front panel.
When the buttons are disabled, you always start scans and copies from the computer using scanning software.
You can still press the Cancel button on the scanner front panel to stop a scan or copy and the Power Save
button to put the scanner into Power Save mode.
To turn off the scanner buttons, follow these steps:
1.
2.
Open the HP Scanner Tools Utility.
On the Buttons tab, select the Disable front panel buttons check box.
To turn on the scanner buttons, clear the Disable front panel buttons check box.
NOTE: You must have administrative privileges on the computer to change the setting of this check
box.
Accessibility
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
40
Accessibility
Download from Www.Somanuals.com. All Manuals Search And Download.
|