HP Hewlett Packard Personal Computer a6347c User Manual
Getting Started  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Setting Up the Computer..........................................................................1  
Putting the Computer Together .................................................................................1  
Placing the computer in the proper location ..........................................................1  
Using surge protection .......................................................................................1  
Connecting to the computer ................................................................................2  
Connecting a Digital Camera (Photo or Video)...........................................................8  
Connecting Other Devices.....................................................................................10  
Storing Documentation and Recovery Discs..............................................................10  
Adjusting the Monitor............................................................................................11  
Adjusting the screen resolution by using Vista .....................................................11  
Adjusting the screen resolution by using the NVIDIA Control Panel ........................11  
Setting Up a Local Area Network ...........................................................................12  
Setting Up a Wired (Ethernet) Connection ...............................................................13  
Integrated Wireless Devices...................................................................................14  
Connecting the Wireless LAN Device......................................................................14  
Checking the wireless LAN device installation .....................................................15  
Using wireless security features .........................................................................16  
Connecting a Modem ...........................................................................................16  
Table of Contents iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Speakers or Microphone ......................................................17  
Sound Connector Types ........................................................................................17  
Connecting a Microphone.....................................................................................20  
Speaker Configurations.........................................................................................21  
Speaker types .................................................................................................22  
Connecting 2/2.1 (Two speakers and a subwoofer) audio speakers......................22  
Connecting 4.1 (Four speakers and a subwoofer) audio speakers .........................23  
Connecting 5.1 (Five speakers and a subwoofer) audio speakers..........................25  
Connecting 7.1 (Seven speakers and a subwoofer) audio speakers.......................26  
Connecting your home stereo system (optional) ...................................................28  
2.1 home stereo installation..............................................................................29  
5.1 home audio installation ..............................................................................30  
5.1 home audio installation procedure...............................................................31  
7.1 home audio installation ..............................................................................32  
7.1 home audio installation procedure...............................................................33  
Connecting digital audio..................................................................................34  
Connecting Headphones.......................................................................................35  
Using a 2.1 speaker system with headphones.....................................................35  
Using a 5.1 to 7.1 speaker system with headphones ...........................................35  
Connecting Speakers Using the Creative Sound Blaster X-Fi Sound Card.....................36  
Connecting the speakers ..................................................................................36  
Connecting the FlexiJack connector....................................................................37  
Getting Help ..........................................................................................39  
Finding Onscreen Guides......................................................................................39  
Finding Guides on the Web...................................................................................39  
Using the Onscreen Help and Support Center..........................................................40  
Using the PC Help & Tools Folder...........................................................................40  
Using the hardware diagnostic tools ..................................................................40  
Using HP Total Care Advisor Software ....................................................................41  
Turning On the Computer for the First Time ............................................43  
Turning Off the Computer......................................................................................44  
Using Shut Down.............................................................................................44  
Using Lock......................................................................................................45  
Using Sleep mode ...........................................................................................45  
Using Hibernate mode .....................................................................................46  
Automatic Sleep, Hibernate, or Away mode .......................................................46  
Restarting the Computer ........................................................................................47  
Connecting to the Internet......................................................................................47  
iv Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Computer with Safety and Comfort...........................................................48  
Setting Up User Accounts ......................................................................................49  
Protecting the Computer ........................................................................................50  
Using passwords .............................................................................................50  
Using antivirus software....................................................................................52  
Using firewall software.....................................................................................52  
Configuring the computer for automatic Microsoft software updates.......................53  
Installing critical security updates.......................................................................54  
Guidelines for Installing Software and Hardware Devices..........................................54  
Transferring Files and Settings from an Old Computer to a New Computer..................55  
Using the Keyboard...............................................................................57  
Identifying Keyboard Features................................................................................57  
Alphanumeric keys ..........................................................................................57  
Function keys ..................................................................................................58  
Edit keys.........................................................................................................58  
Arrow keys .....................................................................................................58  
Numeric keys..................................................................................................59  
Keyboard indicators ........................................................................................59  
Special keyboard buttons .................................................................................60  
Identifying Special Keyboard Buttons ......................................................................60  
Customizing the keyboard buttons .....................................................................62  
Keyboard Shortcuts...............................................................................................63  
Wireless Mouse and Keyboard Troubleshooting.......................................................64  
Synchronizing a wireless mouse and keyboard ...................................................64  
Using the Mouse....................................................................................67  
Using the Mouse Buttons .......................................................................................68  
Scrolling.........................................................................................................68  
Autoscrolling...................................................................................................69  
Panning..........................................................................................................69  
Changing Mouse Settings......................................................................................69  
Switching mouse button functions.......................................................................69  
Changing mouse pointer speed.........................................................................70  
Changing the double-click speed.......................................................................70  
Turning on the ClickLock option.........................................................................70  
Changing the scroll wheel speed.......................................................................71  
Wireless Mouse and Keyboard Troubleshooting.......................................................71  
Table of Contents  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring Speaker and Sound Options ...............................................73  
Adjusting speaker volume.................................................................................74  
Selecting a microphone....................................................................................75  
Configuring audio output..................................................................................75  
Using the Creative Sound Blaster X-Fi or X-Fi Fatality audio card............................76  
Configuring the FlexiJack connector...................................................................77  
Sound Blaster X-Fi configuration modes ..............................................................77  
Configuring speakers with Realtek HD Audio Manager ........................................78  
The Realtek HD Audio Manager control screens ..................................................79  
Configuring sound for recording with the Realtek HD Audio Manager....................81  
Retasking front panel audio connectors ..............................................................82  
Configuring multistreaming audio......................................................................83  
When to use multistreaming audio.....................................................................84  
Setting up multistreaming audio.........................................................................84  
Configuring audio for Windows Media Center ...................................................85  
Selecting recording devices ..............................................................................86  
Resolving sound issues .....................................................................................86  
Using the Windows Media Center Remote Control..................................87  
Remote Control Buttons Overview...........................................................................88  
About the Remote Control......................................................................................90  
Troubleshooting the Remote Control........................................................................91  
Remote sensor is not receiving a signal from the remote control.............................91  
Introducing Your Computer Software .....................................................93  
Learning More About Software...............................................................................93  
Using the Desktop.................................................................................................93  
Removing desktop icons ...................................................................................94  
Retrieving desktop icons ...................................................................................94  
Removing files permanently...............................................................................94  
Using the Windows Start Button Menu ....................................................................94  
Using the All Programs menu ............................................................................94  
Organizing the All Programs list........................................................................95  
Using the Control Panel.........................................................................................95  
Resizing Windows................................................................................................96  
Working with Digital Images .................................................................................96  
About the Internet.................................................................................................97  
Using a Browser...................................................................................................98  
Searching the Internet ......................................................................................98  
Restricting Internet content.................................................................................99  
vi Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Norton Internet Security Antivirus Software ..............................................100  
Configuring and registering Norton Internet Security software.............................100  
Manually running a scan................................................................................100  
Setting a Full System Scan time .......................................................................101  
Setting up a Custom Scan time........................................................................101  
Sending and Receiving E-Mail..............................................................................102  
Using Windows Mail .....................................................................................102  
Using the e-mail program provided by your ISP.................................................102  
Software Quick Reference Table...........................................................................103  
Managing Files ....................................................................................107  
Organizing Files with Folders...............................................................................107  
Creating Folders.................................................................................................108  
Moving Files......................................................................................................108  
Finding Files ......................................................................................................109  
Renaming Files...................................................................................................110  
Deleting Files .....................................................................................................110  
Retrieving Files from the Recycle Bin .....................................................................110  
Copying Files.....................................................................................................111  
Using a Printer ...................................................................................................111  
Using CD and DVD Media Drives..........................................................113  
Using the CD and DVD Drives..............................................................................113  
Handling CDs and DVDs................................................................................114  
Inserting and removing CDs and DVDs.............................................................114  
Compatibility Information ....................................................................................115  
Disc Features and Compatibility Table ..................................................................116  
Optical Drive Quick Reference Table ....................................................................117  
Using Blu-ray and HD Disc Drives.........................................................................118  
Using the Memory Card Reader ...........................................................119  
Media Insertion Guide ........................................................................................120  
Understanding the Activity Light ...........................................................................123  
Formatting a Memory Card .................................................................................123  
Troubleshooting the Memory Card Reader.............................................................124  
Using the HP Personal Media Drive and HP Pocket Media Drive ...........125  
Connecting the Drive ..........................................................................................126  
Inserting the Drive into an HP Drive Bay ................................................................127  
Connecting the Drive to a Computer Without a Drive Bay .......................................128  
Locating the Drive and Assigning a Drive Letter......................................................129  
Using the Drive ..................................................................................................130  
Transferring files to another computer manually.................................................130  
Disconnecting the Drive.......................................................................................130  
Troubleshooting the HP Media Drive.....................................................................131  
Table of Contents vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing CDs, DVDs, or VCDs.................................................................133  
Using Music.......................................................................................................133  
Using Music with Windows Media Center.............................................................134  
Using the music library........................................................................................135  
Adding music to the music library....................................................................135  
Adding music files from the hard disk drive.......................................................135  
Adding music files from a CD..........................................................................136  
Deleting music files from the music library.........................................................137  
Using supported music file types......................................................................137  
Playing Music Files in Windows Media Center.......................................................138  
Changing the visualization settings..................................................................139  
Playing an album in Windows Media Center....................................................140  
Playing a song in Windows Media Center .......................................................140  
Creating a Queue in Windows Media Center........................................................141  
Finding and Playing an Album in Windows Media Center ......................................141  
Using album details .......................................................................................141  
Using Search in Windows Media Center...............................................................142  
Searching for music tracks and files .................................................................142  
Creating a Playlist in Windows Media Center........................................................143  
Copying Music Files to CD in Windows Media Center............................................144  
Listening to Online Radio Stations.........................................................................146  
Playing Music CDs .............................................................................................146  
Playing CDs with Windows Media Player..............................................................147  
Playing DVDs.....................................................................................................147  
Using Windows Media Center to play DVDs.....................................................148  
Troubleshooting poor playback when playing DVDs ..........................................148  
Using country/region codes............................................................................149  
Playing DVD Movies in Windows Media Center ....................................................149  
Changing the DVD Settings..................................................................................150  
Changing the DVD movie language.................................................................150  
Changing DVD remote control options .............................................................151  
Changing DVD closed captioning....................................................................152  
Changing DVD Audio Settings .............................................................................152  
Playing DVDs with Windows Media Player............................................................153  
Using DVD Play to Play DVDs, Videos, High-Definition DVDs, and Blu-ray DVDs.........153  
Playing Video CDs (VCDs)...................................................................................155  
Playing video CDs (VCDs) with Windows Media Player .....................................155  
Using Windows Media Center..............................................................157  
Setting Up Windows Media Center ......................................................................158  
Completing the setup wizard...........................................................................158  
Windows Media Center Start Menu......................................................................160  
Windows Media Center Start menu items.........................................................160  
viii Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows Media Center Features .........................................................................161  
The right music for the moment........................................................................162  
Playing Internet radio.....................................................................................162  
Sharing your digital memories.........................................................................162  
Transforming your living space into a theater ....................................................163  
Online media................................................................................................163  
Navigating Windows Media Center.....................................................................163  
Opening Windows Media Center with a mouse................................................163  
Opening Windows Media Center with the Windows Media Center  
remote control...............................................................................................164  
Using the Windows Media Center menu bars ...................................................164  
Selecting items in Windows Media Center........................................................165  
Windows Media Center control menu..............................................................166  
Changing Windows Media Center Settings...........................................................166  
Windows Media Center Settings categories......................................................167  
Using Windows Media Center power settings...................................................168  
Creating Audio and Data Discs.............................................................169  
Erasing Rewritable Discs Before Recording ............................................................170  
Working with Audio CDs ....................................................................................170  
Audio CD tips ...............................................................................................171  
Before you begin creating discs.......................................................................172  
Creating audio CDs.......................................................................................172  
Creating video discs ......................................................................................173  
Copying a disc .............................................................................................174  
Creating data discs........................................................................................175  
Making a disc label using LightScribe Technology .............................................175  
Making a paper disc label..............................................................................177  
Working with Pictures and Videos .......................................................179  
Working with Digital Images ...............................................................................179  
Viewing Pictures in Windows Media Center ..........................................................180  
Adding Pictures in Windows Media Center ...........................................................180  
Adding picture files from the hard disk drive.....................................................180  
Viewing Pictures in Windows Media Center ..........................................................181  
Viewing pictures as a slide show.....................................................................182  
Viewing a slide show with music .....................................................................182  
Using supported picture file types in Windows Media Center..............................183  
Editing Pictures in Windows Media Center............................................................184  
Fixing red eye or contrast...............................................................................184  
Cropping pictures in Windows Media Center ...................................................184  
Rotating pictures............................................................................................185  
Printing Pictures in Windows Media Center ...........................................................186  
Copying Pictures to CDs and DVDs in Windows Media Center................................186  
Table of Contents ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Videos in Windows Media Center ............................................................187  
Playing digital videos.....................................................................................187  
Using supported video file types......................................................................188  
Transferring and Recording Video Files .................................................................188  
Recording analog and digital video files ..........................................................188  
Creating a DVD from Video Files in Windows Media Center...................................189  
Creating Movies by Using muvee autoProducer....................................191  
Basic steps for making a movie .......................................................................191  
Using muvee autoProducer ..................................................................................193  
Getting started ..............................................................................................193  
Capturing video from a digital video camera....................................................195  
Adding videos...............................................................................................196  
Adding pictures.............................................................................................198  
Adding music................................................................................................199  
Selecting the style..........................................................................................199  
Changing the settings.....................................................................................200  
Making the movie..........................................................................................201  
Previewing the movie .....................................................................................202  
Modifying the movie......................................................................................202  
Saving the movie project ................................................................................204  
Recording the movie project to disc .................................................................205  
Upgrading muvee autoProducer ......................................................................206  
Supported muvee autoProducer output file types................................................206  
Index...................................................................................................207  
x
Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up the Computer  
WARNING: The power supply is preset for the country/region in which you  
purchased your computer. If you move, please check the voltage requirements  
for your new location before plugging the computer into an AC power outlet.  
WARNING: Please read “Safety Information” in the Limited Warranty  
and Support Guide before installing and connecting the computer to  
the electrical power system.  
Putting the Computer Together  
Follow the steps on the setup poster to set up the computer. Read the topics in this section  
to learn more about the location of components and connectors on the computer, and to  
learn about some setup alternatives.  
Look in the computer box for printed details or updates regarding the computer.  
Placing the computer in the proper location  
When setting up your new computer, place it where ventilation openings are unobstructed.  
Make sure that all connections are secure and that all cabling is out of the way. Do not  
place cabling in walkways or where it can be stepped on or damaged from placing  
furniture on it.  
Using surge protection  
Help protect the monitor, computer, and accessories by connecting all power cords for the  
computer and peripheral devices (such as a monitor, printer, or scanner) to a surge  
protection device, such as a power strip with surge protection or an uninterruptible power  
supply (UPS). Many surge protection devices have surge protection inputs and outputs for  
modem or telephone lines. Telephone lines are a common path for lightning spikes to get  
into the system. Some surge protection devices have surge protection for television cable  
connections as well. Use those if the computer has a television tuner installed.  
Setting Up the Computer  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Not all power strips provide surge protection; the power strip must be specifically labeled  
as having this capability. Use a power strip whose manufacturer offers a damage  
replacement policy that replaces the equipment if surge protection fails.  
Connecting to the computer  
Connect the main hardware devices, such as the monitor, keyboard, and mouse, to the  
back of the computer. Other peripheral devices, such as a printer, scanner, or camera,  
also plug into connectors on the back of the computer. Some computers also have  
connectors on the front of the computer. The following table shows some, but not all,  
connectors:  
NOTE: The location, availability, and number of connectors on the computer may vary.  
Connector  
Icon/Label  
Description and function  
Mouse (PS/2 connector).  
Keyboard (PS/2 connector).  
Universal Serial Bus (USB) for mouse, keyboard,  
digital cameras, or other devices with USB  
connectors.  
Printer (parallel).  
Serial port for some digital cameras or other  
serial devices.  
Serial  
2
Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connector  
Icon/Label  
Description and function (continued)  
Audio Line Out (powered speakers).  
Audio Line In.  
Headphones.  
Microphone.  
®
FireWire (IEEE 1394) for video cameras or other  
devices with very fast transfer rates.  
NOTE: You must use a 6-pin FireWire (IEEE 1394)  
transfer cable with this 6-pin connector.  
Digital audio in and digital audio out.  
Side speaker out.  
Rear speaker out.  
Center/Subwoofer.  
Secondary S-video connector to connect a VCR,  
video camera, or other analog source to the  
computer.  
S-Video 2  
Setting Up the Computer  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Connector  
Icon/Label  
Description and function (continued)  
Secondary Composite video connector (yellow) to  
connect to a VCR, video camera, or other analog  
source to the computer.  
Composite  
Video 2  
Secondary Left audio input connector (white).  
NOTE: This Audio In connector is connected to the  
TV tuner. You must use the Audio In connector,  
which is connected to the motherboard and located  
on the back of the computer, to record audio only  
(select models only).  
A/V In  
Audio 2  
L
Secondary Right audio input connector (red).  
NOTE: This Audio In connector is connected to the  
TV tuner. You must use the Audio In connector,  
which is connected to the motherboard and located  
on the back of the computer, to record audio only  
(select models only).  
A/V In  
Audio 2  
R
Headphones Out connector (green) to connect to  
headphones.  
Microphone In connector (pink) to connect to a  
microphone.  
Universal Serial Bus (USB) 2.0 connector to connect  
to a mouse, keyboard, digital camera, or another  
device with a USB connector.  
Power connector.  
Mouse connector to connect a mouse.  
Keyboard connector to connect a keyboard.  
4
Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
Connector  
Icon/Label  
Description and function (continued)  
Printer (parallel) connector to connect a parallel  
printer (select models only).  
Universal Serial Bus (USB) 2.0 connector to connect  
a mouse, keyboard, digital camera, or another  
device with a USB connector.  
Ethernet LAN connector is a network interface  
adapter (also called a network interface card, or  
NIC) that connects to an Ethernet (10BaseT) or Fast  
Ethernet (100BaseT) network hub.  
ETHERNET  
Connect this adapter on the computer with your  
local area network (LAN) hub or any broadband  
connection.  
The green LED indicates a valid connection.  
Microphone In (Mic) (pink) to connect to a  
microphone (also functions as a center/subwoofer  
Line Out when a multichannel audio configuration is  
activated).  
Audio Line Out (green) to connect front speakers.  
Audio Line In (blue) connector to connect to an  
analog audio device such as a CD player for input  
into computer (also functions as rear Line Out when  
a multichannel audio configuration is activated).  
Line C/Sub (gold) connector to connect Center/  
Subwoofer speakers in a multichannel audio  
configuration.  
Center  
Line Rear (black) connector to connect rear speakers  
in a multichannel audio configuration.  
Rear  
Side  
Line Side (gray) connector to connect side speakers  
in an eight-speaker system (7.1).  
S-video In connector to connect from a set-top box  
output connector.  
S-Video  
Setting Up the Computer  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
                 
Connector  
Icon/Label  
Description and function (continued)  
Composite  
Video  
Composite Video In connector (yellow) to connect to  
a TV set-top box.  
Primary left audio input from set-top box  
connector (white).  
A/V In  
Audio 1  
L
NOTE: Audio can be recorded by using this Audio  
In connector, which is connected to the  
motherboard. Some computers include this primary  
left audio input connector on the front of the  
computer (select models only).  
Primary right audio input from set-top box  
connector (red).  
A/V In  
Audio 1  
R
NOTE: Audio can be recorded by using this Audio  
In connector, which is connected to the  
motherboard. Some computers include this primary  
right audio input connector on the front of the  
computer (select models only).  
TV In (TV antenna or cable input from wall outlet  
with no set-top box).  
TV/Cable Ant  
ATSC  
TV In connector for TV cable or antenna, which  
receives ATSC channels (Advanced Television  
System Committee), which are over-the-air digital  
transmission channels.  
TV In connector for TV cable or antenna, which  
receives CATV (Community Antenna Television) or  
cable TV channels.  
CATV  
NTSC  
TV In connector for TV cable or antenna, which  
receives NTSC channels (National Television System  
Committee), which are over-the-air analog  
transmission channels.  
FM In (radio antenna input) connector, which  
connects to the FM antenna cable.  
Plug the FM radio antenna cable into the FM In port  
on the back of the computer on the TV tuner card.  
You may want to extend the ends of the cable to  
improve your FM radio signal reception.  
FM Ant  
6
Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Connector  
Icon/Label  
Description and function (continued)  
Modem (Line In RJ-11) (select models only).  
Plug the modem cable (provided in the computer  
box) into the computer modem connector on the  
back of the computer. Plug the other end to the  
telephone line wall jack connector.  
Analog Video Out: S-video or composite video  
connector (select models only), which connects  
to a TV.  
Analog Video  
VGA/Monitor  
VGA/Monitor (blue) display output connector,  
which connects to a VGA monitor. You may need to  
use a VGA-to-DVI adapter to connect the display to  
the computer.  
HDMI display output connector, which connects to  
an HDMI monitor or TV display. You may need to  
use a HDMI-to-DVI adapter to connect the display to  
the computer.  
HDMI  
DVI  
Digital video output connector, which connects to a  
TV or monitor (select models only). You may need to  
use a VGA-to-DVI or a HDMI-to-DVI adapter to  
connect the display to the computer.  
See the documentation that came with the  
display device.  
Digital audio input (white) connector, which  
connects to a digital audio device with digital input  
(such as a home audio receiver/amplifier) or digital  
speakers (select models only).  
Digital audio output (red) connects to a digital audio  
device with digital output (select models only).  
Digital Out (orange) connector, which connects to a  
digital audio device with digital input (such as a  
home audio receiver/amplifier) or digital speakers  
(select models only).  
Digital Audio  
Out  
Setting Up the Computer  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting a Digital Camera (Photo or Video)  
The following instructions apply only to digital photo cameras and digital video cameras.  
NOTE: When connecting an analog video camera to the computer, use the Video and  
Audio In connectors on the front or back of the computer.  
Refer to the documentation that came with your digital photo camera or digital video  
camera.  
To connect a digital photo camera or a digital video camera:  
1 Turn on the computer, and wait for the Microsoft® Windows Vista® operating system  
to start.  
NOTE: If a Digital Video Device AutoPlay window appears when you connect the  
camera, click Cancel.  
2 Connect the 6-pin video camera transfer cable into the camera, and then into an open  
port on the front or back of the computer. Most digital video cameras use either the  
FireWire (IEEE 1394) port or the USB port.  
8
Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
3 A Found New Hardware message appears. Wait 2 or 3 minutes for Windows Vista to  
make the necessary settings for the new device. When installation is complete, a  
message appears, indicating that the camera is ready to use.  
4 You may need to install driver software for your camera. If so, Windows displays a  
message asking if you want to locate and install driver software. Insert the driver  
software CD, click Locate and install driver software, and then follow any  
onscreen instructions to install the software.  
If the computer does not recognize the digital photo camera or the digital video camera:  
®
1 Click the Windows Start Button  
Control Panel.  
on the taskbar, and then click  
2 Click System and Maintenance, and then click System.  
3 Click Device Manager.  
4 Click the plus sign (+) next to the camera port. If the name of the camera appears, the  
device is ready. If the name is not there, try the following:  
ꢀ
Click Action, and then click Scan for hardware changes. Look in Device  
Manager for a new addition under the port.  
ꢀ
Unplug the video camera transfer cable from the computer, and plug it into a  
different port. Look in Device Manager for a new addition under the port.  
Setting Up the Computer  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting Other Devices  
Other peripheral devices can be connected to the front or back of the computer by using  
USB or FireWire (IEEE 1394) ports. These peripheral devices include printers, scanners,  
video cameras, digital photo cameras, memory card readers, and PDAs (personal digital  
assistants) or handheld computers. Refer to the documentation that came with your device.  
NOTE: Some peripheral devices are not included with the computer.  
NOTE: You must use a 6-pin (not a 4-pin) FireWire (IEEE 1394) cable with the 6-pin  
FireWire (IEEE 1394) connector on the computer.  
Storing Documentation and Recovery Discs  
Store all computer user manuals and warranty information in an easy-to-find, safe location.  
It is a good idea to store the system recovery discs with the documentation. This allows  
easy access to all important computer documents and files.  
10 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Adjusting the Monitor  
Adjusting the screen resolution by using Vista  
To change the screen resolution by using Vista:  
1 Right-click an empty area of the desktop, and then click Personalize.  
2 Click Display Settings.  
3 If necessary, select the monitor, and then adjust the screen resolution by using the  
slider under Resolution.  
4 Click Apply.  
5 Click Yes, if it is present.  
6 Click OK.  
NOTE: You can connect more than one display device (CRT monitor, flat panel monitor,  
TV, and so on) to the computer at a time (select models only). You can quickly change  
which device displays the computer desktop by pressing Alt+F5. Each time you press  
Alt+F5, the computer desktop appears on the next device. If pressing Alt+F5 does not  
work, restart the computer and try again.  
Adjusting the screen resolution by using the  
NVIDIA Control Panel  
To change the screen resolution by using the NVIDIA Control Panel:  
1 Right-click an empty area of the desktop, and then click NVIDIA Control Panel.  
2 Select Standard or Advanced and then click OK.  
3 Under Display, click Change resolution.  
4 If necessary, select the display, and then adjust the screen resolution by using the  
slider under Display resolution.  
5 Click Apply, and then click Yes if you want to apply that resolution.  
Or  
Click No, and change the resolution by using the slider under Display resolution  
again, click Apply and then click Yes.  
Setting Up the Computer 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setting Up a Local Area Network  
A home local area network (LAN) may consist of either a wired or a wireless network that  
you can use to connect the computer to other devices on the network, including other  
computers. The network components may include a hub or a switch, which can connect  
multiple devices to the network, or a router, which can connect computers or a broadband  
Internet connection to the network. This network connection also enables you to share data  
and printers or other devices among your computers. The network connection to the  
Internet is usually through a dial-up or cable modem.  
A wired network uses Ethernet cables to connect the devices on the network. For example,  
the Ethernet cable plugs into the computer network interface adapter and the router.  
A wireless network uses radio waves to connect the devices on the network. For example,  
both the computer and the router have an antenna and adapter that use the same  
Wi-Fi industry standard: 802.11n, 802.11b, 802.11g, or 802.11a.  
The preceding illustration shows a home LAN. The desktop computer has a wired  
connection to a wireless router. The desktop computer also has a printer that it shares with  
the other computers on the network. Each notebook computer has a wireless connection to  
the network router.  
12 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Setting Up a Wired (Ethernet) Connection  
The Ethernet connection, which may be called network interface adapter, Network  
Interface Card, or NIC, provides a high-speed or broadband connection to an  
Ethernet (10BaseT) or Fast Ethernet (100BaseT) network. After you connect this interface to  
a network, such as a LAN, you can connect to the Internet through the network.  
1 Connect an Ethernet cable to the Ethernet connector (A) on the back of the computer,  
and to the network router or LAN device.  
NOTE: Your computer may not come with an Ethernet connector.  
A Ethernet connector (RJ-45 port)  
B Ethernet indicator lights  
2 With the computer turned on, check the indicator lights (B) next to the Ethernet  
connector for the status:  
ꢀ ACTIVITY — Lit yellow during network data transfer activity  
ꢀ LINK — Lit green when there is a valid network connection  
NOTE: Your Ethernet connector may have only one indicator light.  
Setting Up the Computer 13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Integrated Wireless Devices  
Wireless technology transfers data across radio waves instead of wires. Your computer  
may be equipped with one or more of the following integrated wireless devices:  
ꢀ Wireless local area network (WLAN) devices connect the computer to  
wireless local area networks (commonly referred to as wireless networks, wireless  
LANs, or WLANs) in corporate offices, your home, and public areas such as airports  
and restaurants. In a WLAN, each mobile wireless device communicates with a  
wireless access point, which can be several hundred feet away.  
Computers with WLAN devices may support one or more of the four IEEE physical  
layer industry standards: 802.11n, 802.11b, 802.11g, or 802.11a.  
ꢀ Bluetooth devices create a personal area network (PAN) to connect to other  
Bluetooth-enabled devices such as computers, phones, printers, headsets, speakers,  
and cameras. In a PAN, each device communicates directly with the other devices,  
and the devices must be relatively close together—within 33 feet (10 meters) of each  
other.  
ꢀ Wireless wide area network (WWAN) devices provide access to information  
anytime and anywhere that you have cellular (data) coverage. In a WWAN, each  
mobile device communicates to a public carrier’s base station. Public carriers install  
networks of base stations (similar to cell phone towers) throughout large geographic  
areas, effectively providing coverage across entire states, or even entire countries/  
regions.  
For more information about wireless technology, go to:  
http://www.hp.com/go/techcenter/wireless  
Connecting the Wireless LAN Device  
(Select models only)  
You can connect the computer to an 802.11n (select models only), 802.11b or  
802.11g wireless network by using the external antenna that was included with the  
system. This device enables you to establish a wireless network using the computer as a  
wireless access point, or you can use the computer as a wireless client (Station Mode) if  
you already have a wireless network running.  
You need an existing wireless LAN with an Internet connection (consult your Internet  
Service Provider for further information). An external antenna is supplied with the system;  
you must connect it to the 802.11 module to increase the range and sensitivity of  
the radio.  
14 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
To connect the wireless LAN antenna:  
1 Screw the wireless LAN antenna  
cable into the wireless LAN  
connector on the back of  
the computer.  
2 For the best wireless performance,  
place the antenna on the computer  
or in an elevated and open area.  
NOTE: The appearance of your wireless antenna may vary.  
Checking the wireless LAN device installation  
To set up your wireless network, verify that the integrated WLAN device is installed on the  
computer correctly:  
1 Click the Windows Start Button  
on the taskbar.  
2 Type Device Manager into the Start Search box, and then click Device Manager to  
open the Device Manager window.  
3 Click Network adapters. Your WLAN device should be listed here. The WLAN  
device may include the term wireless, wireless LAN, or 802.11.  
NOTE: If no WLAN device is listed, either the computer does not have an integrated  
WLAN device, or the driver for the device is not properly installed.  
4 Click the Windows Start Button  
on the taskbar.  
5 Type Network and Sharing Center into the Start Search box, and then click Network  
and Sharing Center to open the Network and Sharing Center window.  
6 Click Connect to a network, and then follow onscreen instructions.  
For more information about setting up a wireless network:  
ꢀ
Click the Windows Start Button  
on the taskbar, click Help and Support,  
and then type Setting up a wireless network into the Search Help box.  
Go to: http://www.hp.com/go/techcenter/wireless (English only).  
Go to: http://hp.com/support and search for wireless topics.  
ꢀ
ꢀ
Setting Up the Computer 15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using wireless security features  
When you set up a home WLAN or access an existing public WLAN, always enable  
security features to protect the network from unauthorized access. The most common  
security levels are Wi-Fi Protected Access Personal (WPA-Personal) and Wired Equivalent  
Privacy (WEP).  
When setting up a network, HP recommends that you use one or more of the following  
security measures:  
ꢀ
ꢀ
ꢀ
ꢀ
Enable WPA-Personal or WEP security encryption on the router.  
Change the default network name (SSID) and password.  
Set up a firewall.  
Set security on your Web browser.  
For more information about setting up wireless security features, go to:  
http://www.hp.com/go/techcenter/wireless  
Connecting a Modem  
For information on connecting to the Internet, see “Connecting to the Internet” in this guide.  
The modem is used for connecting to an ISP that provides a telephone dial-up connection  
to the Internet.  
NOTE: Your computer may not come with a modem.  
Before you can use telephone dial-up to connect to the Internet and send or receive e-mail  
and faxes, you must connect your telephone service line to the modem (A), which is on the  
back of the computer (B). The setup poster shows you how to plug a modem/telephone  
cable into the computer modem connector and into the telephone service line wall jack  
connector.  
A Modem connector  
B Back of computer  
16 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Connecting Speakers or Microphone  
Speakers are included with the monitor (select models only), or they are sold separately.  
NOTE: For product information on the HP Support Web site, go to:  
http://www.hp.com/support  
For details about connecting stereo speakers to the computer, see the setup poster.  
NOTE: Speakers may be passive (no power button or power cord) or active (power button  
or power cord). Your computer supports only active (powered) speaker systems; the  
speaker system must have its own power cord.  
A stereo speaker set is a left-right, two-channel speaker system. A multichannel audio  
speaker system is a system with more than two channels, and it may include a subwoofer.  
For example, 5.1 channels, referred to as six-speaker mode, uses two front speakers  
(left-right), two rear speakers (left-right), a center speaker, and a subwoofer.  
If the computer has multichannel audio speaker capacity (select models only), you can  
connect four channels for four-speaker output, or six channels for 5.1 speaker output.  
Connect the speaker system to the computer, and then configure the audio software for  
sound output.  
Sound Connector Types  
Your model may include one of three analog sound connector types on the back of  
the computer:  
ꢀ
ꢀ
ꢀ
Three connectors  
Six connectors  
Audio card  
Connecting Speakers or Microphone 17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
The connectors are 3.5 mm (1/8-inch) stereo mini-jacks that connect from the back of the  
computer to speakers and microphones.  
Your system may also have a separate Digital Out connector (select models only).  
Software configuration is different for each connector type, as noted in the instructions.  
NOTE:  
ꢀ
ꢀ
ꢀ
Type 3 has three connectors.  
Type 6 has six connectors.  
Type S has audio card.  
Sound connector  
Illustration  
Type  
3
Three  
Your computer model may include three  
sound connectors. You can connect up  
to a 5.1 audio system to the computer.  
connectors  
Six connectors Your computer model may include six  
sound connectors on the back of your  
computer. You can connect up to a  
6
S
7.1 audio system to the computer.  
Audio card  
connector  
Your computer may include a audio  
card. You can connect up to a  
See the following  
illustrations.  
5.1 audio system (7.1 audio system for  
select models) or digital speakers to the  
audio card on the computer.  
When installing cables, use the sound connectors that match your computer model, as  
shown in the installation procedure steps.  
18 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
The following table shows the sound connectors on the back panel of computer systems.  
Sound connector  
Type 3  
Type 6  
Type S  
Description  
Line Side (gray) connects to side left and right  
analog speakers in an eight-speaker system (7.1).  
Line C/Sub (gold) connects to front center/  
subwoofer speakers in a multichannel audio  
configuration.  
Line Rear (black) connects to rear left and right  
analog speakers in a multichannel audio  
configuration.  
Line Out (lime green) connects to front left and right  
analog speakers.  
Mic (pink) connects to a microphone.  
(Type 3 also functions as center/subwoofer Line Out  
when a multichannel audio configuration is enabled.)  
Line In (light blue) connects to an analog audio  
device such as a CD player for input into computer.  
(Type 3 also functions as rear Line Out when a  
multichannel audio configuration is enabled.)  
Digital Audio Out or SPDIF Out (orange)  
connects to a digital audio device with digital input  
(such as a home audio receiver/amplifier) or to  
digital speakers (select models only).  
FlexiJack (pink) connects to analog Line In devices  
or a microphone.  
The FlexiJack supports two functions. You must select  
either the microphone or the Line In function in the  
Creative Console Launcher. See “Configuring the  
FlexiJack connector.”  
Connecting Speakers or Microphone 19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Sound connector (continued)  
Type 3 Type 6 Type S  
Description  
FlexiJack (blue) connects to analog Line In devices  
or a microphone.  
The FlexiJack supports two functions. You must select  
either the microphone or the Line In function in the  
Creative Console Launcher. See “Configuring the  
FlexiJack connector.”  
Optical In (optical SPDIF input) connects recording  
devices such as a mini disc recorder, digital audio  
tape recorder, or external hard disk recorder.  
Optical Out (optical SPDIF output) connects  
playback devices such as a mini disc player, digital  
audio tape player, or DVD player.  
NOTE:  
ꢀ
ꢀ
ꢀ
Type 3 has three connectors.  
Type 6 has six connectors.  
Type S has audio card.  
Connecting a Microphone  
Your computer comes with one microphone connector in the back of the computer. Some  
models have a second microphone connector in the front of the computer. Only one  
microphone connector works at a time, and the back connector is ready to use unless you have  
the multichannel audio speakers option. For computers with the multichannel audio speakers  
option, the microphone connector in the front of the computer, if present, is ready to use.  
To use a microphone connected to the front of your computer (select models only), select  
the working microphone. See “Selecting a microphone.”  
HP computers support many different audio options, sound connections, and speaker  
configurations. You may set up your computer for two stereo speakers or for multichannel  
audio speaker systems. Connect your speaker system to the computer, and then configure  
the audio software for sound output. For more details about connecting stereo speakers to  
the computer, see the setup poster.  
This chapter describes the most typical options. Your system may have different  
components.  
Speakers are included with the monitor (select models only) or are sold separately.  
NOTE: For additional information on connecting the speakers, refer to the setup poster  
that came with the computer and the documentation that came with your speakers.  
20 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Speaker Configurations  
You may set up your computer for the following supported configurations:  
Name  
Speaker system  
See  
Headphones  
2 (stereo)  
None, muted.  
“Connecting Headphones.”  
Left speaker, right speaker. “Connecting 2/2.1 (Two speakers and  
a subwoofer) audio speakers.”  
2.1  
4.1  
Left speaker, right speaker, “Connecting 2/2.1 (Two speakers and  
and a subwoofer.  
a subwoofer) audio speakers.”  
Two front speakers, two  
rear speakers, and a  
subwoofer.  
“Connecting 4.1 (Four speakers and a  
subwoofer) audio speakers.”  
6/5.1  
8/7.1  
Two front speakers, two  
rear speakers, a center  
speaker, and a subwoofer.  
“Connecting 5.1 (Five speakers and a  
subwoofer) audio speakers.”  
Two front speakers, two  
rear speakers, two side  
speakers, a center  
“Connecting 7.1 (Seven speakers and  
a subwoofer) audio speakers.”  
speaker, and a subwoofer  
(select models only).  
Home audio  
system  
Home stereo or home  
theater audio system with  
passive speakers.  
“Connecting your home stereo system  
(optional).”  
Digital audio  
Digital speakers or digital  
input connector on audio  
system.  
“Connecting digital audio.”  
Multistreaming  
audio  
Two front speakers, two  
rear speakers, two side  
speakers, a center  
“Configuring multistreaming audio.”  
speaker, and a subwoofer  
(select models only).  
Connecting Speakers or Microphone 21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Speaker types  
Speakers may be included with the monitor (select models only) or are sold separately.  
Refer to the product documentation for your speakers.  
Your computer supports only an active (powered) speaker system. An active speaker  
system must have its own power cord. A home audio system does not require active  
speakers, because the receiver provides amplification.  
A stereo speaker set is a left-right, two-channel speaker system. A multichannel audio  
speaker system has a left-right front and left-right rear channel, and it may include a  
subwoofer and a center speaker. Side speakers are included in more advanced systems. A  
subwoofer provides enhanced bass sounds.  
“.1” indicates a subwoofer. For example, 7.1 channels refers to an eight-speaker mode  
and uses two front speakers (left-right), two side speakers (left-right), two rear speakers  
(left-right), a center speaker, and a subwoofer.  
Connecting 2/2.1 (Two speakers and a  
subwoofer) audio speakers  
To connect simple left/right stereo active speakers or two speakers and a subwoofer for  
two-channel (2.1 speaker) output:  
1 Turn off the computer.  
2 Connect the speaker cable to the lime green Audio Line Out connector that matches  
the back of your computer.  
3
6
S
NOTE:  
ꢀ
Type 3 is three connectors.  
Type 6 is six connectors.  
Type S is sound card.  
ꢀ
ꢀ
3 Connect the cable to the audio system. For 2.1 speakers that were shipped with your  
computer (select models only), connect the Audio Line Out connector to the subwoofer.  
4 Connect the left and right speakers to the subwoofer. Refer to the speaker  
documentation.  
22 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5 Turn on the computer.  
NOTE: Always turn on the computer before you turn on the speaker system.  
6 Plug in the speaker system power.  
7 Turn on the speaker system.  
Step 8 is optional for a two-speaker setup.  
8 After the speakers are connected to the computer, configure the audio software for  
sound output for your computer model. See “Connecting Speakers or Microphone.”  
ꢀ
ꢀ
ꢀ
Type 3: See “Configuring speakers with Realtek HD Audio Manager.”  
Type 6: See “Configuring speakers with Realtek HD Audio Manager.”  
Type S (audio card): See “Using the Creative Sound Blaster X-Fi or X-Fi Fatality  
audio card.”  
The following diagram shows a typical 2.1 audio installation:  
Connecting 4.1 (Four speakers and a subwoofer)  
audio speakers  
To connect two front speakers, two rear speakers, and a subwoofer for four-channel  
(4.1 speaker) output:  
1 Turn off the computer.  
2 Connect the front speaker cable to the lime green Audio Line Out connector that  
matches the back of your computer.  
3
6
S
NOTE:  
ꢀ
Type 3 is three connectors.  
Type 6 is six connectors.  
Type S is sound card.  
ꢀ
ꢀ
Connecting Speakers or Microphone 23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
3 Connect the rear speaker cable to the black connector that matches the back of  
your computer.  
3
6
S
For type 3-connector systems, the blue Audio Line In connector functions as a Rear Line  
Out when a multichannel audio configuration is activated.  
4 Connect the cables to the audio system.  
5 Connect the front and rear speakers to the subwoofer. Refer to the speaker  
documentation.  
6 Turn on the computer.  
NOTE: Always turn on the computer before you turn on the speaker system.  
7 Plug in the speaker system power.  
8 Turn on the speaker system.  
9 After the speakers are connected to the computer, configure the audio software for  
sound output for your computer model. See “Configuring Speaker and Sound  
Options.”  
ꢀ
ꢀ
ꢀ
Type 3: See “Configuring speakers with Realtek HD Audio Manager.”  
Type 6: See “Configuring speakers with Realtek HD Audio Manager.”  
Type S (audio card): See “Using the Creative Sound Blaster X-Fi or X-Fi Fatality  
audio card.”  
The following diagram shows a typical 4.1 audio installation:  
24 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting 5.1 (Five speakers and a subwoofer)  
audio speakers  
To connect two front speakers, two rear speakers, a center speaker, and a subwoofer for  
six-channel (5.1 speaker) output:  
1 Turn off the computer.  
2 Connect the front speaker cable to the lime green Audio Line Out connector that  
matches the back of your computer.  
3
6
S
NOTE:  
ꢀ
Type 3 is three connectors.  
Type 6 is six connectors.  
Type S is sound card.  
ꢀ
ꢀ
3 Connect the rear speaker cable to the black connector that matches the back of  
your computer.  
3
6
S
For type 3-connector systems, the blue Audio Line In connector functions as a Rear Line  
Out when a multichannel audio configuration is activated.  
4 Connect the center/subwoofer speaker cable to the gold (or pink Mic) connector that  
matches the back of your computer.  
3
6
S
For type 3-connector systems, the pink Mic connector functions as a center/subwoofer  
speaker Line Out when a multichannel audio configuration is activated.  
5 Connect the cables to the audio system.  
6 Connect the front, rear, and center speakers to the subwoofer. Refer to the speaker  
documentation.  
7 Turn on the computer.  
NOTE: Always turn on the computer before you turn on the speaker system.  
Connecting Speakers or Microphone 25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
8 Plug in the speaker system power.  
9 Turn on the speaker system.  
10 After the speakers are connected to the computer, configure the audio software for  
sound output for your computer model. See “Configuring Speaker and Sound  
Options.”  
ꢀ
ꢀ
ꢀ
ꢀ
Type 3: See “Configuring speakers with Realtek HD Audio Manager.”  
Type 6: See “Configuring speakers with Realtek HD Audio Manager.”  
Type 6 — multistreaming: See “Configuring multistreaming audio.”  
Type S (audio card): See “Using the Creative Sound Blaster X-Fi or X-Fi Fatality  
audio card.”  
The following diagram shows a typical 5.1 audio installation:  
Connecting 7.1 (Seven speakers and a  
subwoofer) audio speakers  
(Select models only)  
To connect two front speakers, two side speakers, two rear speakers, a center speaker,  
and a subwoofer for eight-channel (7.1 speaker) output:  
1 Turn off the computer.  
2 Connect the front speaker cable to the lime green Audio Line Out connector on the  
back of your computer.  
3 Connect the rear speaker cable to the black Audio Line Rear connector on the back of  
your computer.  
26 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4 For type 6 connectors only, connect the side speaker cable to the gray Audio Line Side  
connector on the back of your computer.  
5 Connect the center speaker and subwoofer speaker cable to the gold Audio  
Line C/ Sub connector on the back of your computer.  
6 Connect the cables to the audio system.  
7 Connect the front, rear, side, and center speakers to the subwoofer. Refer to the  
speaker documentation.  
8 Turn on the computer.  
NOTE: Always turn on the computer before the speaker system.  
9 Connect the speaker system to the power.  
10 Turn on the speaker system.  
11 After the speakers are connected to the computer, configure the audio software for  
sound output for your computer model.  
ꢀ
Type 6 — multistreaming: See “Configuring multistreaming audio.”  
Connecting Speakers or Microphone 27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The following diagram shows a typical 7.1 audio installation.  
Color  
Description  
1
2
3
4
Lime green  
Black  
Front audio input  
Rear audio input  
Orange  
Gray  
Center/subwoofer audio input  
Side audio input (not shown)  
Connecting your home stereo system (optional)  
Most home receivers/amplifiers have RCA-type input connectors. You must connect  
Y adapter cables between your computer and your receiver/amplifier. Y adapter cables  
have one 3.5 mm (1/8-inch) stereo mini-jack on one end, and two RCA connectors on the  
other. These cables are purchased separately.  
The number of Y adapter cables that you need to connect to your home stereo system  
depends on the number of speakers that you install:  
ꢀ
ꢀ
ꢀ
ꢀ
2/2.1 speaker system: One Y adapter cable  
4/4.1 speaker system: Two Y adapter cables  
6/5.1 speaker system: Three Y adapter cables  
8/7.1 speaker system: Four Y adapter cables  
28 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Connecting a home stereo system to a computer requires audio cables that are long  
enough to reach from the computer to the stereo. You also must purchase Y adapter or  
mini-extension cables.  
NOTE: Y adapter and mini-extension cables are purchased separately.  
2.1 home stereo installation  
The following diagram shows a typical two-channel (2.1 speaker) installation that uses  
passive stereo speakers and plugs into a home stereo standard left and right input.  
This is only a suggested configuration. Your system may be different.  
A
B
C
E
C
D
E
Computer to 2.1 multichannel audio system connection  
A Computer back-panel connectors (type 3, type 6, or sound card)  
B Y adapter cables  
C Receiver/amplifier (audio input jacks)  
D Subwoofer  
E Front speakers (left and right)  
Connecting Speakers or Microphone 29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5.1 home audio installation  
The following diagram shows a typical advanced home theater audio six-channel  
(6/5.1 speaker) installation that requires multichannel inputs on a receiver/amplifier.  
This is only a suggested configuration. Your system may be different.  
A
B
C
F
E
C
D
G
Computer to 5.1 multichannel audio system connection  
A Computer back-panel connectors (type 3, type 6, or sound card)  
B Y adapter cables  
C Receiver/amplifier (audio input jacks)  
D Subwoofer  
E Center speaker  
F Front speakers (left and right)  
G Rear speakers (left and right)  
30 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5.1 home audio installation procedure  
To connect a six-channel (5.1 speaker) home audio system to the computer:  
1 Turn off the computer.  
2 Turn off the receiver/amplifier.  
3 Connect the front stereo mini-jack end of a Y adapter cable into the lime green Audio  
Line Out connector that matches the back of your computer.  
3
6
S
NOTE:  
ꢀ
Type 3 is three connectors.  
Type 6 is six connectors.  
Type S is sound card.  
ꢀ
ꢀ
NOTE: Receiver/amplifier input connectors may be labeled Surround, 5.1 Channel  
inputs, 6 Channel inputs, CD, DVD, or DVD In.  
Connect the left and right ends of the Y adapter cable into the front left (L) and right (R)  
inputs on the back of the receiver/amplifier.  
4 If you have rear speakers, connect the rear stereo mini-jack end of a Y adapter cable  
into the Audio Line In (blue) or the Rear Speaker Out (black) connector that matches  
the back of your computer.  
3
6
S
ꢀ
Connect the left and right ends of the Y adapter cable into the rear left (L) and  
right (R) inputs on the back of the receiver/amplifier.  
5 If you have a center/subwoofer speaker, connect the stereo mini-jack of a Y adapter  
cable into the microphone (pink) connector or the center speaker/subwoofer (gold)  
connector that matches the back of your computer.  
3
6
S
ꢀ
ꢀ
Connect the left and right ends of the Y adapter cable into the center/subwoofer  
inputs on the back of the receiver/amplifier (6/5.1 or higher-channel system).  
Plug the Y adapter cable into the subwoofer connector on the back of the receiver  
even if a subwoofer is not used.  
6 Turn on the receiver/amplifier.  
Connecting Speakers or Microphone 31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7 Select the receiver/amplifier input that the Y adapter cables are plugged into.  
8 Turn on the computer.  
9 After the audio system is connected to the computer, configure the audio software for  
sound output for your computer model. See “Connecting Speakers or Microphone.”  
ꢀ
ꢀ
ꢀ
Type 3: See “Configuring speakers with Realtek HD Audio Manager.”  
Type 6: See “Configuring speakers with Realtek HD Audio Manager.”  
Type S (audio card): See “Using the Creative Sound Blaster X-Fi or X-Fi Fatality  
audio card.”  
7.1 home audio installation  
The following diagram shows a typical advanced home theater system with an  
eight-channel 8/7.1 speaker installation that requires multichannel inputs on a  
receiver/amplifier.  
This is only a suggested configuration. Your system may be different.  
A
B
C
F
E
C
D
G
Computer to 7.1 multichannel audio system connection  
A Computer back-panel connectors (type 3, type 6, or type S)  
B Y adapter cables  
C Receiver/amplifier (audio input jacks)  
D Subwoofer  
E Center speaker  
F Front speakers (left and right)  
G Rear speakers (left and right)  
32 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7.1 home audio installation procedure  
To connect an eight-channel (7.1 speaker) home audio system to the computer:  
1 Turn off the computer.  
2 Turn off the receiver/amplifier.  
3 Connect the front stereo mini-jack end of a Y adapter cable into the lime green Audio  
Line Out connector on the back of your computer.  
3
6
S
NOTE:  
ꢀ
Type 3 has three connectors.  
Type 6 has six connectors.  
Type S has audio card.  
ꢀ
ꢀ
NOTE: Receiver/amplifier input connectors may be labeled Surround, 7.1 Channel  
inputs, 6 Channel inputs, CD, DVD, or DVD In.  
Connect the left and right ends of the Y adapter cable into the front left (L) and right (R)  
inputs on the back of the receiver/amplifier.  
4 If you have rear speakers, connect the rear stereo mini-jack end of a Y adapter cable  
into the Audio Line In (light blue) or the Rear Speaker Out (black) connector on the  
back of your computer.  
3
6
S
Connect the left and right ends of the Y adapter cable into the rear left (L) and right (R)  
inputs on the back of the receiver/amplifier.  
5 If you have a center/subwoofer speaker, connect the stereo mini-jack of a Y adapter  
cable into the microphone (pink) connector or the center speaker/subwoofer (gold)  
connector on the back of your computer.  
3
6
S
Connect the left and right ends of the Y adapter cable into the center/subwoofer  
inputs on the back of the receiver/amplifier (8/7.1 or higher-channel system).  
Connect the Y adapter cable to the subwoofer connector on the back of the receiver,  
even if you are not using a subwoofer.  
Connecting Speakers or Microphone 33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
6 Turn on the receiver/amplifier.  
7 Select the receiver/amplifier input to which the Y adapter cables are connected.  
8 Turn on the computer.  
9 After the audio system is connected to the computer, configure the audio software for  
sound output for your computer model. See “Configuring Speaker and Sound  
Options.”  
ꢀ
ꢀ
ꢀ
Type 3: See “Configuring speakers with Realtek HD Audio Manager.”  
Type 6: See “Configuring speakers with Realtek HD Audio Manager.”  
Type S (audio card): See “Using the Creative Sound Blaster X-Fi or X-Fi Fatality  
audio card.”  
Connecting digital audio  
(Select models only)  
If you have a audio card and you are connecting your home stereo AV receiver via digital  
out, connect the 3.5 mm (1/8-inch) stereo plug to the Digital Audio Out connector on the  
audio card. Connect the red RCA stereo plug on the 3.5 mm (1/8-inch) Y adapter cable to  
the AV receiver’s digital input connector on the AV receiver. If the red RCA stereo plug  
does not work, try the white stereo plug. Only one of the connectors is needed.  
To connect digital audio, your computer must include a Digital Audio Out connector on  
either the audio card or the back panel. You must connect multichannel speaker outputs if  
you connect the digital output.  
To connect digital audio speakers:  
1 Turn off the computer.  
2 Connect the orange Digital Audio Out connector on the back panel of  
your computer to the digital input (S/PDIF) on the digital speakers or a  
digital audio system.  
3 Turn on the computer.  
NOTE: Always turn on the computer before the speaker system.  
4 Connect the speaker system to the power.  
34 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
5 Turn on the speaker system.  
6 After the speakers are connected to the computer, configure the audio software for  
sound output for your computer model. See “Configuring Speaker and Sound  
Options.”  
ꢀ
ꢀ
ꢀ
Audio card with digital output and type 3 connectors: See “Configuring speakers  
with Realtek HD Audio Manager.” Follow the instructions to enable digital audio  
output.  
Audio card with digital output and type 6 connectors: See “Configuring speakers  
with Realtek HD Audio Manager.” By default, digital audio output is already  
enabled.  
Audio card: See “Using the Creative Sound Blaster X-Fi or X-Fi Fatality audio  
card.” Follow the instructions to enable digital audio output.  
Connecting Headphones  
Your computer comes with a headphones connector (lime green) on the front of the  
computer. The headphones connector is labeled with a headphones icon.  
You can also connect headphones to the Line Out connector (lime green) on the  
back of your computer.  
Using a 2.1 speaker system with headphones  
For select models with the 2.1 speaker system, look for the headphones connector on the  
right side of the main speaker. When headphones are plugged in, the sound to the  
speakers and the subwoofer is muted.  
Using a 5.1 to 7.1 speaker system with  
headphones  
For select models that include a 5.1 or higher speaker system, a headphones connector is  
located on the right side of the control tower.  
If the control tower displays HP (for headphones), the headphones are enabled; the sound  
to the speakers and the subwoofer is muted.  
ꢀ
Push and hold the On button on the control tower for several seconds to enable sound  
from the speakers.  
ꢀ
Press the On button briefly to enable the headphones.  
Connecting Speakers or Microphone 35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Connecting Speakers Using the Creative Sound  
Blaster X-Fi Sound Card  
This section provides an overview of connecting to the Creative Sound Blaster X-Fi  
sound card.  
NOTE: For additional information on connecting the speakers, refer to the documentation  
that came with your speakers.  
Connecting the speakers  
Connector Description  
AD-Link for AD_Link X-Fi I/O Console (the X-Fi console is sold separately)  
Line Out_3 (orange or yellow)  
5.1 audio setup: Front center, subwoofer  
6.1 audio setup: Front center, subwoofer, and rear center  
7.1 audio setup: Front center, subwoofer, and side left  
Line Out_2 (black)  
4.1, 5.1, 6.1 audio setup: Rear left and right  
7.1 audio setup: Rear left, rear right, and side right  
Line Out_1 (lime green)  
2/2.1 audio setup: Front left and right  
FlexiJack (white) for Line In, Microphone, Digital In/Out  
The FlexiJack supports three functions. You must select the function in the  
Creative Console Launcher. See “Connecting the FlexiJack connector.”  
36 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To connect the X-Fi sound card to your speakers:  
1 Use the audio connection table to connect your audio system to the sound card.  
2 Turn on the computer.  
3 Plug in and turn on the speaker system power.  
After connecting the speaker system to the sound card, follow the steps in “Configuring the  
FlexiJack connector” to configure the speaker settings in the Creative Sound Blaster X-Fi  
software.  
Connecting the FlexiJack connector  
The FlexiJack connector performs three functions:  
ꢀ
ꢀ
ꢀ
Digital Input/Output  
Line In  
Microphone  
You must select the function in the Creative Console Launcher.  
NOTE: If you are using the FlexiJack as your Digital In connection and you want to  
connect digital speakers as your output device, you will need a special connector from  
Creative.  
Connecting Speakers or Microphone 37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
38 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Getting Help  
Finding Onscreen Guides  
Onscreen guides are available in the User’s Guides folder (select models only).  
1 Click the Windows Start Button  
2 Click All Programs.  
on the taskbar.  
3 Click User Guides.  
4 Click an item to view it or use it.  
NOTE: If there are no guide titles listed in the folder, your computer has no onscreen  
guides.  
Finding Guides on the Web  
You can find guides and information for your computer by using the Internet to access the  
Support Web site.  
1 Go to http://www.hp.com/support in your Web browser.  
2 Select your country/region and language.  
3 Click Support and Drivers.  
4 Enter the model number of your computer, and then click Search  
5 Click Manuals.  
.
6 Locate the manual you want, and then do one of the following:  
ꢀ
ꢀ
Click the title to display the file in Adobe Acrobat Reader (which you can  
download from the Manuals page if it is not currently installed on your computer).  
Right-click the title, click Save Target As, specify a location on the computer  
where you want to save the file, rename the file (retaining the .pdf extension), and  
then click Save.  
Getting Help 39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using the Onscreen Help and Support Center  
Information about your computer is in the onscreen Help and Support Center (select  
models only). Here, you can find links to driver updates, access to technical support  
options, and information about commonly asked questions.  
To open the Help and Support Center:  
ꢀ
Press the Help button (select models only) on your keyboard.  
Or  
ꢀ
Click the Windows Start Button  
and Support.  
on the taskbar, and then click Help  
Using the PC Help & Tools Folder  
The PC Help & Tools folder contains special utilities for computer owners, such as  
support information and programs.  
To see the items in the PC Help & Tools folder:  
1 Click the Windows Start Button  
2 Click All Programs.  
on the taskbar.  
3 Click PC Help & Tools.  
4 Click Hardware Diagnostic Tools to view or use these tools.  
Using the hardware diagnostic tools  
The hardware diagnostic tools help you to do the following:  
ꢀ
View the computer system information, such as memory usage, drive capacity  
and CPU usage.  
ꢀ
ꢀ
Find alerts about your computer.  
Show information, and run diagnostic tests on computer hardware and some  
computer peripheral hardware, such as printers, monitors, speakers, and  
network adapters.  
ꢀ
Run a computer system test.  
40 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using HP Total Care Advisor Software  
HP Total Care Advisor is a desktop tool you use to monitor and access system health  
information about key areas of your computer. HP Total Care Advisor has four major  
areas:  
ꢀ
ꢀ
ꢀ
ꢀ
PC Health & Security provides a dashboard view of the status of key areas of  
your computer.  
PC Action Center receives messages and alerts that inform you of changes in  
the status of your computer health.  
PC Help provides simple access to help and support information for your  
computer.  
Products Showcase provides a listing of products and services available for  
your computer, and presents comparison shopping information about those  
items.  
To open HP Total Care Advisor:  
1 Click the Windows Start Button  
2 Click All Programs.  
on the taskbar.  
3 Click HP Total Care Advisor.  
Getting Help 41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
42 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning On the Computer for the First Time  
After you have completed the steps on the setup poster, you are ready to turn on the  
computer.  
1 Press the Power button on the monitor.  
2 Press the On button on the front of the computer.  
3 Turn on the speakers, if they are present.  
4 Set up the computer by following the onscreen instructions. If prompted, select the  
country/region in which you are physically located, and wait while the computer  
makes preparations. (When you select an alternate language, it may take up to  
30 minutes for this one-time language setup on the computer.)  
5 Set up Microsoft Windows Vista by following the onscreen instructions.  
6 Follow the onscreen instructions to register with HP or Compaq, sign up for updates,  
and get online. If you do not want to set up an Internet connection at this time, you can  
do so later by manually starting Easy Internet Services. See “Connecting to the  
Internet.”  
7 Norton Internet Security automatically opens. Follow the onscreen instructions to set up  
this tool, which protects the computer and your privacy.  
NOTE: If you stop the setup procedure, when you are ready to finish, double-click the  
Easy Setup icon on the desktop to run the first-time wizard.  
Turning On the Computer for the First Time 43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Turning Off the Computer  
For best results, when using Microsoft Windows Vista, do not shut down the computer,  
except when you must turn off the power for safety reasons, such as to make repairs, install  
new hardware or cards in the computer chassis, or change a battery.  
As an alternative to shutting down the computer, you can lock it or put it into either Sleep  
or Hibernate mode, if it is available. You can set the power management timers to put the  
computer automatically into Sleep or Hibernate mode.  
Sleep and Hibernate modes are power states. Sleep mode saves your work to memory, so  
you can resume quickly; saves your work to the hard disk; and then goes to a  
reduced-power state. During Sleep mode, the computer hardware light remains on, and  
the computer is ready to wake quickly and resume your work where you left off. Hibernate  
mode saves the system memory to a temporary file on the hard disk and then turns off the  
hardware.  
Some computers also have a reduced-power state called Away mode. Away mode turns  
off the display and mutes the audio, but otherwise keeps the computer operational. During  
Away mode, the computer can perform tasks such as recording a scheduled TV program  
or streaming video and music files to a remote location.  
Using Shut Down  
For best results, when using Windows Vista, turn off the computer without pressing any  
buttons on the computer chassis.  
NOTE: For information on the Windows Start Button  
, see “Using the Windows Start  
Button Menu.”  
1 Close any open software programs by clicking the X at the upper-right corner of each  
program window.  
2 Click the Windows Start Button  
on the taskbar.  
3 Click the Arrow button next to the Lock button.  
4 Click Shut Down.  
5 Turn off the monitor.  
To turn on the computer after a shut down:  
1 Press the power button on the monitor.  
2 Press the On button on the front of the computer.  
44 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Using Lock  
If you lock the computer, only you or the administrator can log on to it.  
1 Click the Windows Start Button  
2 Click the Lock button.  
on the taskbar.  
3 To unlock this computer, you must enter your password.  
Using Sleep mode  
When the computer is in Sleep mode, it goes into a reduced-power state. The monitor is  
blank, as if it were turned off. By using Sleep mode:  
ꢀ
You save time, because you do no have to wait for the computer to go through the  
normal startup routine when you wake it again. The next time that you use the  
computer, any programs, folders, and documents that were open before you put the  
computer into Sleep mode are available.  
ꢀ
ꢀ
The computer can receive faxes, if you set it to do so.  
The computer can retrieve e-mail messages and download information from the  
Internet automatically, if you set it to do so.  
To put the computer into Sleep mode manually:  
ꢀ
Press the Sleep button on the keyboard, if it is present.  
Or  
1 Click the Windows Start Button  
on the taskbar.  
2 Click the Power button.  
Or  
1 Click the Windows Start Button  
on the taskbar.  
2 Click the Arrow button next to the Lock button.  
3 Click Sleep.  
To wake the computer from Sleep mode:  
ꢀ
Or  
ꢀ
Press the Sleep button on the keyboard.  
Quickly press the On button on the front of the computer.  
If the computer does not work properly when you wake it from Sleep mode, restart the  
computer.  
1 Click the Windows Start Button  
on the taskbar.  
2 Click the Arrow button next to the Lock button.  
3 Click Restart.  
Or  
Quickly press the On button on the front of the computer.  
Turning On the Computer for the First Time 45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using Hibernate mode  
Hibernate mode is available as an advanced power setting. When the computer is in  
Hibernate mode, it saves to the hard disk drive everything that is in computer memory,  
turns off the monitor and the hard disk drive, and then turns itself off. When you turn on the  
computer again, your programs, folders, and documents are restored to the screen.  
To put the computer into Hibernate mode manually:  
1 Click the Windows Start Button  
on the taskbar.  
2 Click the Arrow button next to the Lock button.  
3 Click Hibernate, if it is present.  
NOTE: If Hibernate is not present, you can set up the computer to go into Hibernate  
mode automatically; see “Automatic Sleep, Hibernate, or Away mode.”  
To wake the computer from Hibernate mode, press the On button on the front of the  
computer.  
If the computer does not work properly when you wake it from Hibernate mode, restart the  
computer.  
1 Click the Windows Start Button  
on the taskbar.  
2 Click the Arrow button next to the Lock button.  
3 Click Restart.  
Automatic Sleep, Hibernate, or Away mode  
You can set the computer to go into Sleep, Hibernate, or Away modes automatically when  
it is idle for a specified number of minutes. To put the computer into a mode automatically,  
modify the power management settings.  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click System and Maintenance.  
4 Click Power Options.  
5 Click Change when the computer sleeps.  
6 For Sleep or Away mode, select an option from the Put the computer to sleep  
drop-down menu, and click Save changes.  
Or  
For Hibernate or Away mode:  
a Click Change advanced power settings.  
b Click the plus sign (+) next to Sleep.  
c
Click an item and make selections, and then click Apply.  
d Click OK.  
46 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Restarting the Computer  
When you restart the computer, the computer clears some settings and starts over using the  
operating system and software in its memory. Restarting is the easiest and most effective  
way to solve many software issues for the computer.  
Also, you may want to install additional software programs or hardware devices onto the  
computer, and doing so may require that you restart the computer after installation.  
1 Click the Windows Start Button  
on the taskbar.  
2 Click the Arrow button next to the Lock button.  
3 Click Restart.  
Or  
Quickly press the On button on the front of the computer.  
Connecting to the Internet  
The computer can connect to the Internet through the telephone modem. There are other  
ways to connect to the Internet that do not use the telephone modem, such as a LAN (local  
area network) or DSL (digital subscriber line). Check with your Internet Service Provider  
(ISP) for specific information on the connection. See “About the Internet” for more  
information about using the Internet.  
Refer to the “Setting Up the Computer” chapter of this guide to make the hardware  
connections: for a modem, see “Connecting a Modem” and for a network see “Setting Up  
a Local Area Network.”  
To connect to the Internet, you must have:  
ꢀ
A computer.  
ꢀ
A dial-up modem, a cable modem, or a DSL modem for high-speed broadband  
connections. Contact your ISP for any specific software and hardware that you  
may need.  
ꢀ
ꢀ
Internet service with an ISP.  
A Web browser.  
Turning On the Computer for the First Time 47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To connect to the Internet:  
1 Sign up with an ISP. If you already have an account with an ISP, skip this step and  
follow the instructions provided by the ISP.  
2 If you did not set up for Internet service during the initial setup of the computer, set it  
up now by using Easy Internet Services.  
a Click the Windows Start Button  
b Click All Programs.  
on the taskbar.  
c
Click Online Services and then click Easy Internet Services.  
d Follow the onscreen instructions to select an ISP and set up Internet service.  
NOTE: Easy Internet Services provides a list of ISPs; however, you may choose  
another ISP or transfer an existing account to this computer. To transfer existing  
accounts, follow the instructions provided by the ISP.  
3 Connect to the Internet. You must connect through your ISP.  
ꢀ
Double-click the ISP-provided icon on the desktop, and log in.  
4 Open your Web browser and browse the Internet.  
You can use any Web browser; most computers have Microsoft Internet Explorer. To  
open Internet Explorer:  
a Click the Windows Start Button  
b Click Internet Explorer.  
on the taskbar.  
NOTE: If you have questions, contact your ISP directly.  
Using the Computer with Safety and Comfort  
WARNING: To reduce the risk of serious injury, read the Safety & Comfort  
Guide. It describes proper workstation setup, posture, and health and work  
habits for computer users. It also provides important electrical and mechanical  
safety information.  
Before you begin using the computer, arrange the computer and your work area to  
maintain your comfort and productivity. Refer to the Safety & Comfort Guide for important  
ergonomic information:  
ꢀ
Click the Windows Start Button  
on the taskbar, click All Programs, click  
User Guides, and then click Safety & Comfort Guide.  
Or  
ꢀ
Type  
http://www.hp.com/ergo  
into the Web browser address box, and then press Enter on the keyboard.  
48 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Setting Up User Accounts  
User accounts enable you to set the privileges for each user of the computer. For example,  
you can set the software programs that each user is allowed to access.  
Windows Vista provides three types of user accounts:  
ꢀ
ꢀ
Administrator:  
Is allowed to change account types for other users, change passwords, change  
system-wide settings, access all files on the computer, and install software and drivers  
that are compatible with Windows Vista.  
Limited - Standard User:  
ꢀ
ꢀ
Is not allowed to change other user settings or passwords. A Limited account may  
not be able to install or run some software.  
Is allowed to change the limited account picture, and to create, edit, or delete the  
account password.  
ꢀ
Guest:  
ꢀ
Is allowed to use most software and change system settings that do not affect other  
users or the security of the computer.  
ꢀ
ꢀ
Is not allowed to change other user settings or passwords, or install software.  
Does not have access to password-protected files, folders, and settings.  
Creating multiple user accounts on the same computer has certain advantages, as well as  
some drawbacks.  
ꢀ
Advantages to multiple user accounts:  
ꢀ
Ability to create individual user settings  
ꢀ
Ability to limit access to software for certain users  
ꢀ
Drawbacks to multiple user accounts:  
ꢀ
ꢀ
ꢀ
ꢀ
More memory (RAM) usage  
Multiple Temporary Internet Files folders to remove during Disk Cleanup  
More data to back up  
Longer time to complete virus scan  
Turning On the Computer for the First Time 49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Protecting the Computer  
Protect the computer, personal settings, and data from a variety of risks by using:  
Passwords.  
Antivirus software.  
ꢀ
ꢀ
ꢀ
ꢀ
Firewall software.  
Critical security updates.  
NOTE: Security solutions are designed to act as deterrents, but they may not be able to  
prevent software attacks or to prevent the computer from being mishandled or stolen.  
Computer risk  
Security feature  
Unauthorized use of the computer User password  
or user account  
Computer viruses  
Norton Internet Security software (antivirus  
program)  
Unauthorized access to data  
Norton Internet Security software (firewall program)  
Windows Vista updates  
Unauthorized access to Setup  
Utility, BIOS settings, and other  
system identification information  
Administrator password  
Ongoing or future threats to the  
computer  
Critical security updates from Microsoft  
Using passwords  
A password is a group of characters that you choose to secure the computer information.  
Several types of passwords can be set, depending on how you want to control access to  
your information. Passwords can be set in the Microsoft Windows Vista operating system  
on the computer.  
CAUTION: To avoid being locked out of the computer, record each password  
you set. Because passwords are not displayed as they are set, changed, or  
deleted, it is essential to record each password immediately and store it in a  
secure place.  
Use the following list as a basic guide when choosing a password:  
ꢀ
ꢀ
ꢀ
Choose a password that is easy for you to remember but difficult for others to guess.  
Choose a long password (minimum of six characters).  
Use a combination of uppercase and lowercase letters, numbers, and symbols.  
50 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ꢀ
ꢀ
Don’t use personal information that others can easily figure out, such as your birthday,  
child’s name, or phone number.  
Don’t write down passwords unless you store them in a secure place away from the  
computer. Do not store passwords in a file on the computer.  
You can use the same password for more than one Windows Vista security feature.  
ꢀ
A password can have any combination of up to eight letters and numbers, and it is not  
case sensitive.  
ꢀ
A password must be set and entered with the same keys. For example, if you set the  
password with number keys on the keyboard, the password is not recognized if you  
subsequently try to enter it with the embedded numeric keypad.  
NOTE: Select models include a separate numeric keypad, which functions exactly like  
the keyboard number keys, except in the case of passwords.  
ꢀ
A password set in Windows Vista must be entered at a Windows Vista prompt.  
The following table lists the Windows Vista passwords and describes their functions. For  
information on how to set passwords, see “Using passwords.” For additional information  
on Windows Vista passwords, such as screen saver passwords, type passwords into the  
Search Help box in the Help and Support Center.  
Password  
Function  
Windows Vista Administrator  
password  
Protects administrator-level access to  
computer contents.  
Windows Vista User password Protects access to a Windows Vista user account and  
the computer contents. It must be entered when you  
resume from Sleep or Away mode.  
CAUTION: If you forget the Administrator password, you cannot access  
Setup Utility.  
Turning On the Computer for the First Time 51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using antivirus software  
When you use the computer for e-mail, network, or Internet access, you expose it to  
computer viruses. Computer viruses can disable the operating system, software programs,  
or utilities, or cause them to function abnormally.  
Antivirus software can detect most viruses, destroy them, and in most cases repair any  
damage that viruses may have caused. To provide ongoing protection against newly  
discovered viruses, antivirus software must be kept up to date.  
The Norton Internet Security program, which is preinstalled on the computer, includes  
antivirus and firewall components. The software includes a free update period. It is  
strongly recommended that you protect the computer against new viruses beyond the free  
period by purchasing extended update service. Instructions for using and updating Norton  
Internet Security software, and for purchasing extended update service, are provided  
within the program.  
To open and access Norton Internet Security:  
1 Click the Windows Start Button  
2 Click All Programs.  
on the taskbar.  
3 Click Norton Internet Security, and then click Norton Internet Security in  
the list.  
See “Using the Norton Internet Security Antivirus Software” for more information about  
using the Norton antivirus software.  
For more information about computer viruses, type viruses into the Search Help box in the  
Help and Support Center.  
Using firewall software  
When you use the computer for e-mail, network, or Internet access, unauthorized persons  
may be able to gain access to information about you, the computer, and your data. To  
protect your privacy, use firewall software. Microsoft Windows Vista includes firewall  
software preinstalled on the computer. Also, Norton Internet Security, which is preinstalled  
on the computer, includes a firewall program.  
Firewall features include logging, reporting, and automatic alarms to monitor all incoming  
and outgoing communications.  
To open and access Norton Internet Security:  
1 Click the Windows Start Button  
2 Click All Programs.  
on the taskbar.  
3 Click Norton Internet Security, and then click Norton Internet Security in  
the list.  
Under some circumstances, a firewall can block access to Internet games, interfere with  
printer or file sharing on a network, or block authorized e-mail attachments. To solve the  
problem temporarily, disable the firewall, perform the task that you want to perform, and  
then enable the firewall again. To resolve the problem permanently, reconfigure the  
firewall.  
52 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Configuring the computer for automatic Microsoft  
software updates  
Microsoft continually updates the Windows Vista operating system. HP recommends that  
you run Windows Vista Update monthly to install these updates. One way to keep the  
operating system up to date is to use the Automatic Updates feature.  
When you are connected to the Internet, Windows Vista Update automatically notifies you  
through a pop-up message or icon in the notification area when critical updates are  
available. When you see the Windows Vista Update message, allow the updates to  
download to your system. If you update the system weekly, or even monthly, the time  
required for download is minimal.  
To configure Automatic Updates:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Security.  
4 Click Windows Update.  
5 Click Change settings.  
6 Select the desired configuration:  
ꢀ Install updates automatically (recommended) — This is the default  
setting, and it enables you to specify a day and time to automatically download  
and install recommended updates.  
ꢀ Download updates but let me choose whether to install them  
ꢀ Check for updates but let me choose whether to download and  
install them  
ꢀ Never check for updates (not recommended) — This option makes the  
computer more vulnerable to security threats and performance problems and is not  
recommended.  
7 Click OK.  
Turning On the Computer for the First Time 53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Installing critical security updates  
CAUTION: To reduce the risk of information damage or loss from security  
breaches and computer viruses, install all critical updates from Microsoft as  
soon as you receive an alert.  
Additional updates to the operating system and other software may have become  
available after the computer was shipped. Download all available updates and install  
them onto the computer.  
To get the latest updates for the computer:  
1 Click the Windows Start Button  
on the taskbar.  
2 Click Help and Support, and then click Software, drivers, and BIOS  
updates.  
3 Follow any onscreen instructions to complete downloading and installing the  
latest updates.  
Guidelines for Installing Software and Hardware  
Devices  
After you set up the computer, you may want to install additional software programs or  
hardware devices. Keep in mind the following important guidelines:  
ꢀ
Before installation, make a restore point by using the Microsoft System Restore  
program.  
a Make sure you are logged in as an Administrator.  
b Click the Windows Start Button  
Click Control Panel.  
d Click System and Maintenance.  
on the taskbar.  
c
e
f
Click Backup and Restore Center.  
Click Create a restore point or change settings.  
g In the System Properties window, on the System Protection tab, click Create.  
Follow the onscreen instructions.  
The restore point is a snapshot of the computer settings. By using System Restore, you  
ensure that you have a stable set of settings to use. For information on System Restore,  
go to the Microsoft Web site at: http://www.microsoft.com/worldwide  
ꢀ
ꢀ
Choose software that is compatible with the computer; check the operating system,  
memory, and other requirements listed for the new software.  
Install the new software according to the directions provided by the software  
manufacturer. If you need help, check the manufacturer’s documentation or customer  
service information.  
54 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ꢀ
If you need to restore factory settings after you install a program that is incompatible:  
a Make sure you are logged in as an Administrator.  
b Click the Windows Start Button  
Click Help and Support.  
d Click Recover factory settings.  
Choose an option, and then follow the onscreen instructions.  
on the taskbar.  
c
e
ꢀ
For antivirus software, uninstall the existing software program before reinstalling it or  
installing a new antivirus program.  
NOTE: Use only licensed original software. Installing copied software may be illegal, or it  
may result in an unstable installation or infect the computer with a virus.  
Transferring Files and Settings from an Old  
Computer to a New Computer  
You can copy files from the old computer to a new computer by using media such as CDs  
or DVDs, memory sticks, or personal media drives. You can also copy certain settings such  
as Web browser Favorites and address books by using Windows Easy Transfer software,  
which is included with Microsoft Windows Vista.  
To transfer your files and settings:  
1 Click the Windows Start Button  
2 Click Help and Support.  
on the taskbar.  
3 Type transfer files into the Search Help box.  
4 Click the overview article Transfer files and settings from another computer.  
This article describes a Microsoft solution for moving your files to your new computer.  
5 Click Windows Easy Transfer.  
6 Follow the onscreen instructions in the Windows Easy Transfer wizard to transfer your  
files from an old computer to a new one.  
Turning On the Computer for the First Time 55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
56 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Keyboard  
IMPORTANT: Please see the documentation that came with the keyboard for additional  
information about using the keyboard, customizing keyboard buttons, and using any  
special keyboard keys. You may need to install keyboard software and drivers to access  
all the special features and functions of the keyboard.  
Your computer may include either a standard keyboard or a wireless keyboard. Using the  
keyboard is the primary way that you enter text and commands for the computer.  
A standard keyboard connects to the keyboard connector in the back of the computer.  
A wireless keyboard (select models only) uses a receiver/transmitter, instead of a  
connector cable, to communicate with the computer. A light on the receiver indicates  
receiver activity.  
Identifying Keyboard Features  
The keyboard contains an arrangement of standard keys, indicator lights, and special  
buttons (select models only). Your keyboard may vary from the illustrations that follow.  
Alphanumeric keys  
The alphanumeric keys are the main keys found on a standard typewriter.  
Using the Keyboard 57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Function keys  
The function keys, located above the main keys, are labeled F1 through F12. Most function  
key operations vary by software program. F1 and F3 are available at all times:  
ꢀ
Pressing F1 opens a Help window for the software program being used.  
Pressing F3 opens a search window.  
ꢀ
Edit keys  
The edit keys are Insert, Home, Page Up, Delete, End, and Page Down. Use these keys to  
insert and delete text, and to quickly move the cursor on the screen. The edit keys function  
differently with some software programs.  
Arrow keys  
The arrow keys are controls for moving up, down, right, and left. You can use these keys  
instead of the mouse to move the cursor for navigation on a Web page, in a document, or  
in a game.  
58 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Numeric keys  
Press the Num Lock key to lock and unlock the numeric key functions:  
ꢀ
When the Num Lock light on the keyboard is on, the numeric keys work in the same  
way as the number keys and arithmetic functions found on a basic calculator.  
ꢀ
When the Num Lock light on the keyboard is off, the numeric keys are directional keys  
used to move the cursor or play games.  
Keyboard indicators  
Each keyboard indicator is a light labeled with a name or with an icon for its status:  
Icon  
Name  
Description  
Num Lock When lit, numeric keys are locked as number keys and  
arithmetic functions.  
Caps Lock When lit, alphanumeric keys are locked to uppercase.  
Scroll Lock When lit, scroll function is locked.  
Using the Keyboard 59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Special keyboard buttons  
There are special buttons (select models only) at the top of the keyboard. These buttons  
operate a CD or DVD player, control speaker volume, connect you to the Internet, or  
provide quick access to specific functions. (Some keyboard models have some of these  
special buttons to the left side of the main keys, some do not have the Internet buttons, and  
some use a different layout on the top right.)  
Identifying Special Keyboard Buttons  
Your keyboard may not include some of the buttons listed.  
NOTE: The number, location, and labeling of buttons vary by keyboard model.  
Access buttons  
Icon  
Feature  
Description  
Sleep  
Puts computer into or out of power-saving  
mode. It may take 10–30 seconds before  
screen reappears.  
User  
Switches between computer users.  
Information  
Opens Help and Support Center.  
?
Or  
Pictures  
(Photos)  
Opens imaging software program. Can be  
reconfigured.  
Or  
Music  
Video  
Internet  
Opens music software program. Can be  
reconfigured.  
Or  
Opens video software program. Can be  
reconfigured.  
Opens an Internet browser. Can be  
reconfigured to open any Web site or  
software program.  
60 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Icon  
Feature  
Description (continued)  
Search  
Opens page designed to search the Internet.  
Can be reconfigured to open any Web site  
or software program.  
E-mail  
Opens e-mail program. Can be reconfigured  
to open any Web site or software program.  
Or  
HP Club  
Links to HP Web site.  
hp Or  
Compaq  
My Presario  
Links to Compaq Web site.  
Compaq  
Or  
Shopping  
Sports  
Goes to a shopping Web site. Can be  
reconfigured to open a site or software  
program.  
Or  
Goes to a sports Web site. Can be  
reconfigured to open a site or software  
program.  
Or  
Finance  
Goes to a finance Web site. Can be  
reconfigured to open a site or software  
program.  
Or  
Connect to  
Internet  
Goes to an Internet browser page. Can be  
reconfigured to open a site or software  
program.  
Or  
Search  
Chat  
Goes to a search engine. Can be  
reconfigured to open a site or software  
program.  
Or  
Goes to chat Web site. Can be reconfigured  
to open a site or software program.  
Or  
Entertainment Goes to a entertainment Web site. Can be  
reconfigured to open a site or software  
program.  
Offers  
Goes to popular Web site. Can be  
reconfigured to open a site or software  
program.  
Calculator  
Opens calculator. Can be reconfigured.  
Using the Keyboard 61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Media control or playback buttons  
Icon  
Label  
Description  
Eject 1 and  
Eject 2  
Opens or closes upper and lower optical drive trays.  
Rec  
Starts recording to selected media.  
Stops media.  
Stop  
Play/Pause  
Plays or pauses media.  
Rewinds media.  
Prev  
Next  
Fast-forwards media.  
Volume  
Volume knob controls speaker volume: Turn clockwise to  
increase speaker volume and counterclockwise to decrease  
volume.  
NOTE: The Volume knob can continue to be turned, even  
after maximum volume has been reached.  
Volume Up and Down buttons control speaker volume:  
Press the Volume Up button to increase volume and the  
Volume Down button to decrease volume.  
Or  
– +  
Mute  
Turns speaker sound on and off.  
Or  
Customizing the keyboard buttons  
You can customize some of the special buttons on the keyboard (select models only) to  
open different programs or files or go to favorite Web sites.  
If you cannot customize the keyboard buttons using the following procedure, see the  
documentation that came with the keyboard.  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, if it is present.  
4 Click Keyboard.  
62 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
5 Click the Buttons tab, and then double-click the button that you want to change.  
NOTE: You can click the Speed tab to adjust the character repeat delay speed or the  
cursor blink rate. You can also click the Hardware tab, and then click the  
Properties button to view keyboard information.  
6 For the button configuration, click the Down arrow to the right of the list and choose  
the button capability, such as Complex remote page with label or Simple  
local file with label.  
7 Enter a display label and the address information. For a Web page, enter the URL.  
8 Click OK.  
9 On the Buttons tab, click Apply.  
10 Repeat steps 5 through 9 for each button that you want to customize.  
11 Click OK to finish.  
NOTE: Click the Restore Defaults button on the Buttons tab to restore all of the buttons  
to the factory settings.  
Keyboard Shortcuts  
Keyboard shortcuts are combinations of keys that you press simultaneously to perform  
specific actions. For example, from the Windows Vista desktop, press the Alt (alternate)  
key, the Ctrl (control) key, and the S key (the letter S) to display support information for the  
computer (including the model number, serial number, and service ID). You see this  
combination of keys represented as Alt+Ctrl+S. In Windows Vista, press Ctrl+C to copy an  
item that you’ve highlighted or selected, Ctrl+V to paste a copied item, or Ctrl+Z to undo  
the previous action. These shortcuts perform the same actions that you can perform  
through menus, but they save you time and mouse clicks.  
Using the Keyboard 63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Wireless Mouse and Keyboard Troubleshooting  
Synchronizing a wireless mouse and keyboard  
If the wireless mouse and keyboard do not respond, use this procedure to resynchronize  
the devices.  
1 Plug the receiver into a USB port on the computer. If you have a choice, a USB port on  
the front of the computer is best if it will be closer to the mouse and keyboard.  
2 Push the Connect button (A) on the receiver, and hold it for 5 to 10 seconds until the  
blue light starts to flash.  
3 Push and hold the Connect button (B) on the underside of the mouse until the blue LED  
on the receiver stops flashing.  
NOTE: The receiver connection session times out after 60 seconds. To ensure the  
connection was established instead of the receiver timing out, move the mouse and check  
for response.  
64 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
After the mouse connection is established, repeat the procedure with the keyboard:  
1 Push the Connect button on the receiver, and hold it for 5 to 10 seconds until the blue  
light starts to flash.  
2 Push and hold the Connect button (C) on the underside of the keyboard until the blue  
LED on the receiver stops flashing.  
For additional mouse and keyboard troubleshooting tips, refer to the Troubleshooting and  
Maintenance Guide.  
Using the Keyboard 65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
66 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Mouse  
IMPORTANT: Please see any documentation that came with the mouse for additional  
information about using the mouse, customizing mouse buttons, and using special buttons  
or features that are included with the mouse. You may need to install mouse software and  
drivers to access all the special features and functions of the mouse.  
Your computer includes a mouse for directing the cursor (pointer) on the Windows Vista  
desktop. The mouse uses a roller ball or optics (a light and sensor) to sense movement and  
cause the cursor on the screen to move. Use the mouse on a flat surface.  
NOTE: The optical mouse cannot work on a glass, translucent, or reflective surface.  
A wireless mouse (select models only) is an optical mouse that uses a receiver/transmitter,  
instead of a connector cable, to communicate with your computer. A light on the receiver  
indicates receiver activity.  
NOTE: The wireless mouse goes into a sleep or suspend mode after 20 minutes of  
inactivity. Click a button on the mouse to wake it. (Moving the wireless mouse does not  
wake it.)  
Using the Mouse 67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Mouse Buttons  
The mouse has two or three buttons on the top:  
ꢀ
ꢀ
ꢀ
Click the left mouse button (A) to position the cursor or select  
an item.  
Click the right mouse button (C) to display a menu of  
commands for the item you clicked.  
On select models, use the scroll wheel button (B) in the center  
for scrolling and panning.  
NOTE: Your mouse may look different from the one  
shown here.  
You see these terms for using the mouse:  
ꢀ
Click means to press and release the left mouse button once.  
ꢀ
Double-click means to click the left mouse button and then  
quickly click it again.  
ꢀ
Right-click means to press and release the right button once.  
To select an item, click it.  
To select sequential items in a list or group, click the first item in the list, and then press and  
hold the Shift key on the keyboard while you click the last item.  
To select non-sequential items, click the first item, and then press and hold the Ctrl key on  
the keyboard while you click the additional items.  
You can switch the function of the left and right buttons for left-handed use. See “Changing  
Mouse Settings.”  
Scrolling  
Click the left mouse button to place the cursor in a document, and then:  
ꢀ
To scroll toward the beginning of the document, roll the scroll wheel button up  
(away from you).  
ꢀ
To scroll toward the end of the document, roll the scroll wheel button down  
(toward you).  
68 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Autoscrolling  
1 Place the cursor anywhere in the document, and then press the scroll wheel  
button once. An autoscroll icon appears.  
2 Move the mouse in the direction you want to scroll. The farther you move the  
mouse from the starting point, the faster the document scrolls.  
3 To stop autoscrolling, press the scroll wheel button again.  
NOTE: Autoscrolling does not work with some software programs.  
Panning  
1 Place the cursor anywhere in the document, and then press and hold down the scroll  
wheel button.  
2 Slowly move the mouse in the direction you want to pan. The farther that you move the  
mouse from the starting point, the faster the document pans.  
3 To stop panning, release the scroll wheel button.  
NOTE: Panning works only if the horizontal scroll bar in the window is active. Panning  
does not work with some software programs.  
Changing Mouse Settings  
Switching mouse button functions  
To switch the functions of the right and left mouse buttons for left-handed use:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, if it is present.  
4 Click Mouse.  
5 Click the Buttons tab, and check Switch primary and secondary buttons.  
6 Click Apply (using the new primary button), and then click OK.  
Using the Mouse 69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Changing mouse pointer speed  
To change the speed of the cursor on the screen relative to the motion of the mouse:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, if it is present.  
4 Click Mouse.  
5 Click the Pointer Options tab.  
6 In the Motion area, use the slider to adjust the pointer speed. You can select other  
pointer options by placing a check in the check box next to the setting that you want.  
7 Click Apply, and then click OK.  
Changing the double-click speed  
To change the double-click speed of the right mouse button:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, if it is present.  
4 Click Mouse.  
5 Click the Buttons tab.  
6 In the Double-click speed area, use the slider to adjust the double-click speed.  
7 Click Apply, and then click OK.  
Turning on the ClickLock option  
ClickLock enables you to highlight or drag an object without holding down the  
mouse button.  
To turn on the ClickLock option:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, if it is present.  
4 Click Mouse.  
5 Click the Buttons tab.  
6 In the ClickLock area, place a check in the Turn on ClickLock check box.  
7 Click Apply, and then click OK.  
70 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Changing the scroll wheel speed  
To change the scroll wheel speed:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, if it is present.  
4 Click Mouse.  
5 Click the Wheel tab.  
6 In the Vertical Scrolling area, adjust the number of lines per scroll by clicking the  
arrow buttons.  
Or  
In the Horizontal Scrolling area, adjust the number of lines per scroll by clicking the  
arrow buttons.  
7 Click Apply, and then click OK.  
Wireless Mouse and Keyboard Troubleshooting  
If the wireless mouse and keyboard do not respond, see “Synchronizing a wireless mouse  
and keyboard” in the “Using the Keyboard” chapter to resynchronize the devices.  
Using the Mouse 71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
72 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Configuring Speaker and Sound Options  
Speakers are included with the monitor (select models only), or they are sold separately.  
For details about connecting stereo speakers to the computer, see the setup poster. For  
details about connecting multichannel speakers, see “Connecting Speakers or  
Microphone.”  
NOTE: Speakers may be passive (no power button or power cord) or active (power button  
or power cord). Your computer supports only active (powered) speaker systems; the  
speaker system must have its own power cord.  
A stereo speaker set is a left-right, two-channel speaker system. A multichannel audio  
speaker system is a system with more than two channels, and it may include a subwoofer.  
For example, a 5.1 channel speaker system, referred to as six-speaker mode, uses two  
front speakers (left-right), two rear speakers (left-right), a center speaker, and a subwoofer.  
If your computer has multichannel audio speaker capacity (select models only), you can  
connect four channels for four-speaker output, or six channels for 5.1 speaker output.  
Your model may include one of three analog sound connector types on the back of  
the computer:  
ꢀ
ꢀ
ꢀ
Three connectors (Realtek Audio)  
Six connectors (Realtek Audio)  
Audio sound card (Creative Sound Blaster X-Fi and X-Fi Fatality, or Analog Devices,  
Inc (ADI))  
Your system may also have a separate Digital Out connector (select models only).  
See “Connecting Speakers or Microphone” for more information about connecting your  
speaker system, and then configure the audio software for sound output as described in  
this section.  
Configuring Speaker and Sound Options 73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Adjusting speaker volume  
Use the Volume icon on the taskbar to set speaker volume. Then, you can adjust the volume  
by using:  
ꢀ
The Volume knob or buttons on the keyboard (select models only).  
The Volume knob on the speakers (select models only).  
ꢀ
There are two ways to use the Volume icon:  
1 Click the orange Realtek HD Audio Manager Volume icon on the  
taskbar.  
2 Select a tab, such as Digital Output, and then adjust the volume by clicking  
the slider and moving it.  
3 When you are satisfied with the sound level, click outside the Volume window to  
close it.  
Or  
1 Right-click the white Microsoft Volume icon on the taskbar, and then click  
Open Volume Mixer. The Volume Mixer settings window opens.  
2 Adjust the volume by clicking the slider and moving it.  
3 When you are satisfied with the sound level, click the Close box (the X in the  
upper-right corner) to close this window.  
74 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Selecting a microphone  
Your computer comes with one microphone connector on the back of the computer. Some  
models have a second microphone connector on the front of the computer. Only one  
microphone connector works at a time, and the back connector is ready to use unless you  
have the multichannel audio speakers option. For computers with the multichannel audio  
speakers option, the microphone connector on the front of the computer, if it is present, is  
ready to use.  
To use a microphone connected to the front of your computer (select models only), select  
the working microphone:  
NOTE: If you connect your microphone to the back of your computer, you do not need to  
perform this procedure.  
1 Right-click the white Microsoft Volume icon on the taskbar, and then click  
Recording Devices. The Sound window opens.  
2 Select the Recording tab.  
3 Double-click Microphone, and select the General tab.  
4 Click the microphone connector that you want to use, and then click Apply.  
5 Click OK.  
Adjusting microphone volume  
To adjust the volume of the microphone:  
1 Right-click the orange Realtek HD Audio Manager Volume icon on the  
taskbar, and then click Audio Devices.  
2 Click the Recording tab.  
3 Double-click Microphone, and then click the General tab.  
4 Click the microphone connector that you want to use.  
5 Click the Levels tab.  
6 Adjust the volume for the microphone by clicking the slider and moving it.  
7 Click OK, and then click OK again.  
Configuring audio output  
You can configure your speaker audio output by using the following software. Use the  
software that applies to your computer model:  
ꢀ
Creative Sound Blaster X-Fi or X-Fi Fatality Speaker Settings Configuration  
(audio card)  
ꢀ
ꢀ
Realtek HD Audio Manager (multistreaming audio)  
Windows Media Center (all systems)  
Configuring Speaker and Sound Options 75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Creative Sound Blaster X-Fi or X-Fi  
Fatality audio card  
This section provides an overview of configuring and recording with the Creative Sound  
Blaster X-Fi or X-Fi Fatality audio card (select models).  
Configuring the audio card software  
After you have installed and connected the speakers, follow these steps to configure  
multichannel audio output for computers:  
NOTE: Three modes are available; Entertainment Mode is selected here. For information  
about the other modes, see “Sound Blaster X-Fi configuration modes.”  
1 Click the Windows Start Button  
2 Point to All Programs.  
on the taskbar.  
3 Click Creative, Sound Blaster X-Fi, and then click Creative Console  
Launcher.  
4 The Entertainment Mode window opens. If a different mode displays, click the Mode  
button, and then select Entertainment Mode.  
5 Click the Windows Start Button  
Creative Console Launcher.  
, All Programs, Creative, and then  
6 Click the Speakers button.  
7 Click Auto Detect. Creative automatically detects the type of speakers that  
are connected to your system.  
8 Click X to close the window.  
Now that you have configured the audio card software, you must configure audio output  
for your media software program. The procedure is different for each program. Refer to  
the instructions that came with the media software program.  
76 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Configuring the FlexiJack connector  
Your audio device may have a FlexiJack connector that supports both microphone and Line  
input. If so, you can change the FlexiJack mode, if necessary. To do this, you must select  
the function in the Creative Console Launcher after you connect the audio cable to the  
FlexiJack connector on the audio card.  
NOTE: If you are using the FlexiJack as your Digital In connection, and you want to  
connect digital speakers as your output device, you need a special connector from  
Creative.  
1 Connect your audio cable to the FlexiJack connector on the audio card.  
2 Click the Windows Start Button  
Creative Console Launcher.  
, All Programs, Creative, and then  
3 Click the Jacks button.  
4 Under FlexiJack Mode, select either Digital I/O or Mic-In/Line-In.  
5 Close the window.  
Sound Blaster X-Fi configuration modes  
The Sound Blaster X-Fi audio card includes three modes: Audio Creation Mode,  
Entertainment Mode, and Game Mode.  
The main functions, such as speaker configuration, equalizer, and volume control, are  
available in all three modes. However, each mode optimizes the audio card resources to  
provide the best audio performance for different activities.  
Using Audio Creation Mode  
The Audio Creation Mode enables advanced recording functions.  
Available features:  
ꢀ
ꢀ
ꢀ
ꢀ
Recording from several audio sources  
Applying studio-quality effects  
Mixer settings  
Equalizer settings  
Configuring Speaker and Sound Options 77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using Entertainment Mode  
The Entertainment Mode optimizes the audio card for playing movies and music.  
Available features:  
ꢀ
ꢀ
ꢀ
ꢀ
Configuring speakers and headphones  
Configuring surround sound, DTS, and THX  
Volume, bass, and treble controls  
Mixer settings  
Using Game Mode  
The Game Mode optimizes the audio card for playing games.  
Available features:  
ꢀ
ꢀ
ꢀ
ꢀ
Volume, bass, and treble controls  
Mixer settings  
Configuring speakers and headphones  
Configuring surround sound  
More information  
For more information about configuring and using the audio card, go to the Creative  
Sound Blaster X-Fi documentation:  
1 Click the Windows Start Button  
2 Point to All Programs.  
on the taskbar.  
3 Click Creative, Sound Blaster X-Fi, and then click Documentation.  
4 Click Online Manual.  
Configuring speakers with Realtek HD Audio  
Manager  
After you have installed and connected your speakers, complete the following steps if your  
computer model has type 6 connectors and is capable of multistreaming audio:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound.  
4 Click Realtek HD Audio Manager. The window opens.  
NOTE: You must have your speakers connected for Realtek to display the  
Speakers tab.  
5 Click the Speakers tab to open that control screen.  
78 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6 Click the Speaker Configuration tab.  
7 Select your type of speakers from the drop-down menu.  
8 Click OK.  
The Realtek HD Audio Manager control screens  
ꢀ Digital Output: Enables you to select the Environment and Equalizer settings. You  
can select an environment, such as Stone Room or Auditorium. Under Equalizer,  
you can either click a preset button, such as Pop or Live, or manually adjust the  
settings and then save them for easy selection later.  
ꢀ Speakers: Enables you to select the number of speakers, view whether the  
connectors are analog or digital, and select the digital audio output and digital audio  
input devices. Only speakers that are currently being used are displayed.  
Configuring Speaker and Sound Options 79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ꢀ Microphone: Enables fine control over the recording volume and playback volume  
of the microphone. Includes buttons for noise suppression and acoustic echo  
cancellation.  
ꢀ Line In (Digital Input): Enables control over volume, playback, mute, recording,  
and multistreaming audio.  
80 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ꢀ HDMI Output: Enables you to select the Environment and Equalizer settings. You  
can select an environment, such as Stone Room or Auditorium. Under Equalizer,  
you can either click a preset button, such as Pop or Live, or manually adjust the  
settings and then save them for easy selection later.  
Configuring sound for recording with the  
Realtek HD Audio Manager  
The microphone connector is ready to use for recording sound. If you want to use another  
connector for recording, such as the Digital Audio In connector, complete the following  
steps to select it:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, and then Realtek HD Audio Manager.  
4 Click the Line In tab.  
5 Click Digital In tab, and then select Set Default Device.  
6 Click OK to close the window.  
NOTE: You can retask the front pink, blue, and green connectors to perform other audio  
functions; see “Retasking front panel audio connectors.”  
Configuring Speaker and Sound Options 81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Retasking front panel audio connectors  
You can retask the Line In, Mic In, Headphone, and Front Speaker Out connectors on the  
front of the computer, as necessary.  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Hardware and Sound, and then click Realtek HD Audio Manager.  
4 Click a front connector icon that you want to retask.  
NOTE: Only the connectors that are not dimmed are able to be retasked.  
5 Place a check in the device check box that you want to select, and then click OK.  
You can now use the front connectors as either input or output devices.  
82 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Configuring multistreaming audio  
The Realtek HD Audio Manager software enables you to listen to two different audio  
sources on two different speaker sets.  
For example, you can hear one audio source through a rear-panel speaker connection,  
and a second source through a front-panel headphone or speaker connection. You must  
configure multistreaming audio for the system if you want to hear two audio sources on  
separate speakers.  
Audio output overview  
The front-panel audio output is the green stereo headphone connector only.  
The rear-panel outputs are the speaker connectors that can be set up as multichannel out  
from stereo 2.0 to 7.1 (select models only) configurations. Refer to your user  
documentation for information about setting up powered speakers or your AV receiver.  
Audio input overview  
You can select two of the following audio sources to play through front-panel headphone  
and rear-panel speaker connectors:  
1 From an externally connected device source, such as:  
ꢀ
A microphone with cable connected to Mic In (pink).  
An MP3 player with cable connected to Line In (blue).  
ꢀ
2 From an internal source inside, or directly connected to, the computer, audio files may  
reside on: hard disk drives, DVDs, CDs, USB drives, HP Personal Media Drives, or  
any connected device. Play internal media files through programs such as:  
ꢀ
Microsoft Windows Media Player.  
ꢀ
Other installed media player software.  
NOTE: Digital Audio In cannot be multistreamed.  
Configuring Speaker and Sound Options 83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
When to use multistreaming audio  
You may multistream two audio sources as described in the following typical examples:  
1 For online gaming:  
ꢀ
You hear 5.1 game sound on AV receiver or powered speakers.  
You also hear gaming conversation on a headset.  
ꢀ
See “Example 1: For online gaming.”  
2 For digital home entertainment:  
ꢀ
ꢀ
You hear DVD sound on a living room TV/display or AV receiver from the  
rear-speaker connections.  
You also hear sound on the computer or powered speakers that are connected to  
the front-panel green headphone jack, from one of the following external  
computer audio sources:  
a Front-panel Line In  
b Internal source residing on a hard disk drive, DVD, CD, USB drive, or other  
external device  
See “Example 2: For digital home entertainment.”  
Setting up multistreaming audio  
Example 1: For online gaming  
To configure multistreaming audio output for online gaming with Realtek HD Audio  
Manager, you must enable Voice-over-IP software (software used to converse over the  
Internet). Other players hear your voice from the microphone via the Internet, and you hear  
the game audio from the rear speakers.  
1 Connect the audio input and output connectors as follows:  
ꢀ
ꢀ
ꢀ
A headphone set to the front Headphone Out (green) connector  
A microphone to the front Mic In (pink) connector for online conversation  
A set of powered stereo 5.1 or 7.1 speakers to the rear Speaker Out connectors  
for gaming sound output  
2 Click the Realtek HD Audio Manager icon on the taskbar to open the  
Realtek HD Audio Manager window.  
3 Click the Device Advanced Settings button.  
4 Select Make front and rear output devices playback two different audio  
streams simultaneously.  
5 Place a check in the Output Mic In/Line In to front panel check box, and  
click OK.  
Or  
Place a check in the Output Mic In/Line In to rear panel check box, and  
click OK.  
84 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Example 2: For digital home entertainment  
To configure multistreaming audio output for digital home entertainment with Realtek HD  
Audio Manager:  
1 Connect the audio output connectors as follows:  
ꢀ
A headphone set or powered speakers to the front Headphone Out (green)  
connector for stereo music playback  
ꢀ
A set of powered stereo 5.1 or 7.1 speakers to the rear Speaker Out connectors  
for DVD playback sound output  
2 Click the Realtek HD Audio Manager icon on the taskbar to open the  
Realtek HD Audio Manager window.  
3 Click the Device Advanced Settings button.  
4 Select Make front and rear output devices playback two different audio  
streams simultaneously.  
5 Place a check in the Output Mic In/Line In to front panel check box, and then  
click OK.  
Or  
Place a check in the Output Mic In/Line In to rear panel check box, and then  
click OK.  
Configuring audio for Windows Media Center  
After you have installed, connected, and configured the speakers, follow these steps to  
configure multichannel audio output for Windows Media Center:  
1 Click the Windows Start Button  
2 Click Windows Media Center.  
on the taskbar.  
3 Under Tasks, click settings, General, and then click Windows Media  
Center Setup.  
4 Click Set Up Your Speakers. The Welcome to Speaker Setup window opens.  
5 Click Next.  
6 Choose the speaker connection type, and then click Next.  
7 Select the number of speakers, and then click Next.  
8 Click Test to test the speakers.  
9 Click Finish.  
Configuring Speaker and Sound Options 85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Selecting recording devices  
(Type 6 connectors only)  
To select a sound recording device:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
3 Click Sounds and Audio Devices (or Sounds, Speech and Audio Devices).  
The Sounds and Audio Devices window opens.  
4 Click the Audio tab.  
5 Under Sound Recording, select a recording device, such as Realtek HD Front  
Pink Jack.  
6 Click OK.  
7 Close the window.  
Resolving sound issues  
If you do not have sound from the speakers, try the following:  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Check the volume and mute settings. See “Connecting Headphones.”  
Use active (powered) speakers, or speakers with an amplifier.  
Check the sound cable connections.  
Ensure that the software program and sound software are properly configured.  
Some software programs may result in low volume, even when the Volume is turned to  
the maximum value. If this is the case, click the Volume icon on the taskbar, and  
increase the system volume.  
ꢀ
ꢀ
Reconfigure the sound software for surround sound.  
Reinstall the audio card drivers by using application reinstallation program; refer to  
the Troubleshooting and Maintenance Guide that came with the computer.  
86 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the Windows Media Center  
Remote Control  
(Select models only)  
NOTE: The remote control is included with select models  
only. Features and location may vary.  
The remote control is designed to work with Windows Media  
Center. You can use the remote control with Windows Media  
Center to play CDs and DVDs, view pictures, and much more.  
This remote control helps you navigate the Windows Media  
Center windows on the computer just as a TV remote control  
helps you navigate cable TV options or control the playback of  
a movie in a VCR or DVD player.  
The remote control can:  
ꢀ
Navigate and control all Windows Media Center  
windows.  
ꢀ
ꢀ
ꢀ
ꢀ
Control the video display.  
Place the computer in and out of sleep mode.  
Shut down or restart the computer.  
Log off from Windows Media Center or switch users.  
The remote control cannot:  
ꢀ
Navigate the Windows desktop or control other computer  
programs outside of Windows Media Center.  
ꢀ
ꢀ
Be used as a VCR, DVD player, or stereo remote control.  
Turn on or off a TV that is connected to the computer (select  
models only).  
ꢀ
Turn on the computer.  
Using the Windows Media Center Remote Control 87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Remote Control Buttons Overview  
1
On/Off (Sleep) — Puts the computer into and out of  
a power-reduced Sleep mode. It does not turn the  
computer off.  
2
3
4
Visualization — Displays visual imagery that is  
synchronized to the sound of the music tracks.  
Music — Opens the Music Library window in  
Windows Media Center.  
Radio — Opens the FM Radio window in Windows  
Media Center.  
5
6
Guide — Opens the Television Program Guide.  
Recorded TV — Opens the recorded tv window  
where recorded TV programs are listed.  
7
8
Arrows — Moves the cursor to navigate and select  
actions within all Windows Media Center windows.  
DVD Menu — Opens the Play DVD window in  
Windows Media Center or opens the main menu of a  
DVD movie, if available.  
9
Back — Returns to the previous window within  
Windows Media Center.  
10  
11  
More Info — Displays available information about a  
selected media file and displays other menus.  
Start — Opens the Windows Media Center  
main menu.  
12  
13  
Volume — Increases (+) and decreases (–) volume.  
Mute — Turns computer sound off. The word Mute is  
displayed when Mute is turned on.  
14  
Record — Records a selected television program and  
stores it on the hard disk drive.  
15  
16  
Play — Plays the selected media.  
Rewind — Moves the media backward at  
three speeds.  
17  
Skip Backward — Moves media backward  
7 seconds, or to the beginning of a music track or a  
DVD chapter.  
88 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
18  
0 to 9, #, * — Enters text and numbers into a Windows Media Center search or text box. Each time  
you press a number button, a different character appears. Press the Enter button to select a character.  
19  
20  
Clear — Deletes the last character entered.  
LED — Activity indicator light. The LED tells you that the remote control is emitting a signal when you  
press a button.  
21  
22  
23  
24  
Print — Prints an item in Windows Media Center.  
Picture — Opens the Pictures Library window in Windows Media Center.  
Video — Opens the Videos Library window in Windows Media Center.  
Live TV — Displays the full-screen view of live TV. Moves a TV program forward to the end of the pause  
buffer and resumes playing live TV.  
25  
26  
OK — Selects the desired action or window option and acts as the Enter key.  
Aspect — Changes the aspect ratio of the display. Zooms in on the picture three times then returns to  
the full-screen aspect ratio.  
27  
28  
Slide Show — Plays a slide show of all the pictures on the hard disk drive.  
CH/PG up (+) and down (–) — Changes the TV channels or moves pages up and down, depending  
on available options. Moves to the next DVD chapter.  
29  
30  
31  
32  
Eject — Ejects CD or DVD drive.  
Pause — Pauses audio and video tracks and live or recorded TV programs.  
Fast Forward — Moves media forward at three speeds.  
Skip Forward — Moves media forward 30 seconds in videos and live TV, one music track, or one  
DVD chapter.  
33  
34  
Stop — Stops the media currently playing.  
Enter — Selects the desired action, menu, or window option.  
NOTE: The remote control requires two AA batteries. The remote control operates up to 8 meters (26 feet) away  
from the remote sensor. Make sure there is nothing blocking the pathway between the remote control and the  
remote sensor.  
NOTE: Make sure you turn off the monitor and turn down or mute the volume, for example, if you have a  
scheduled recording in the middle of the night and do not want to be disturbed. The computer does not  
automatically go into Sleep mode if Windows Media Center is open. It is recommended that you close Windows  
Media Center before you manually place the computer in sleep mode.  
NOTE: If the computer model does not include a TV tuner, some remote control buttons are inactive.  
Using the Windows Media Center Remote Control 89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About the Remote Control  
Use the remote control to open the Windows Media Center program, and use it to view  
TV, record TV programs, play previously recorded TV programs, and play music, movies,  
or video.  
To open Windows Media Center using the remote control, simply point it at the remote  
sensor, and press the Windows Media Center Start button  
.
Use the remote control at a maximum distance of 8 meters (26 feet) from the remote sensor  
and at a maximum of 22.5 degrees (45 degrees total) from the center of the remote  
sensor.  
NOTE: Use alkaline batteries in the remote control.  
90 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Troubleshooting the Remote Control  
If the remote doesn’t work:  
ꢀ
ꢀ
ꢀ
Make sure that the batteries for the remote control are charged and installed correctly.  
Make sure the front of the remote sensor (IR receiver) is not blocked.  
Point the remote control within a 45-degree angle range and less than 8 meters  
(26 feet) away.  
ꢀ
If a pressed key repeats itself or sticks, unplug the remote sensor from the USB  
connector, wait 1 minute, and plug the remote sensor back in. Try altering the lighting  
conditions in the room or moving the location of the remote sensor if this continues.  
ꢀ
ꢀ
Press the Enter button on the remote control after changing a channel.  
Point the remote control toward the remote sensor, and press a button. A faint red light  
should appear on the remote sensor. If the light appears, then the problem is probably  
in the Windows Media Center software. Close Windows Media Center, restart the  
computer, and then open Windows Media Center again.  
ꢀ
If the remote control works in Windows Media Center but not when changing  
channels, you need to reconfigure the Windows Media Center software settings for  
the cable set-top box or satellite receiver.  
Remote sensor is not receiving a signal from the  
remote control  
If a faint red light doesn’t appear when you point the remote control at the remote sensor  
and press the OK button, try the following:  
1 Click the Windows Start Button  
then select Properties.  
on the taskbar, right-click Computer, and  
2 Click Device Manager.  
3 Click the plus (+) sign next to Universal Serial Bus Controllers.  
4 If the eHome Infrared Receiver is listed under Universal Serial Bus Controllers,  
Windows is properly detecting the IR Receiver. If it is not listed, go to the next step.  
5 Unplug the end of the USB cable on the remote sensor from the computer, and plug it  
into the same USB port.  
6 Disconnect all other USB devices, leave the remote sensor plugged in, and then restart  
the computer. Plug in other USB devices after the remote sensor appears in the Device  
Manager window.  
Using the Windows Media Center Remote Control 91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
92 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introducing Your Computer Software  
The operation of your computer is controlled by two kinds of software:  
ꢀ
The Microsoft Windows Vista operating system, which displays the desktop on the  
monitor and controls your computer’s hardware, peripherals, and software programs.  
ꢀ
Software programs that perform specific functions, such as word processing.  
The software programs included with the computer may vary by model and by  
country/region.  
Learning More About Software  
You can find information on using software and on the Microsoft Windows Vista operating  
system in this guide and the onscreen Help. For Microsoft Windows Vista, you can also  
open the built-in Help and Support Center.  
ꢀ
Press the Help button (labeled with a question-mark icon) on your keyboard (select  
models only).  
Or  
ꢀ
Click the Windows Start Button  
Support.  
on the taskbar, and then click Help and  
For help with specific software, refer to the onscreen Help within the program.  
Using the Desktop  
The desktop is the work area that appears on the monitor screen. It includes the taskbar  
along one edge, and shortcut icons that make it easy to find the things you need.  
The taskbar shows the Windows Start Button  
; a button for each open window, so that  
you can switch between programs; and the notification area that includes the time.  
A shortcut icon is a small picture that you click to open a folder or start a program. One  
icon on the desktop that performs a special function is for the Recycle Bin, which collects  
files or shortcuts that you delete. When you empty the Recycle Bin, the files or shortcuts are  
permanently deleted. You can retrieve items from the Recycle Bin until you empty it.  
Introducing Your Computer Software 93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Removing desktop icons  
You can remove most desktop icons by deleting them.  
To delete a desktop icon:  
1 Right-click the desktop icon.  
2 Click Delete. The icon is placed in the Recycle Bin.  
Retrieving desktop icons  
1 Double-click the Recycle Bin icon on your desktop.  
2 Drag the icon onto the desktop.  
Removing files permanently  
1 Right-click a file, and then click Delete.  
2 Right-click the Recycle Bin icon on the desktop, and then click Empty Recycle Bin.  
Using the Windows Start Button Menu  
Click the Windows Start Button  
Start menu, you can:  
on the taskbar to open the Start menu. From the  
ꢀ
ꢀ
ꢀ
ꢀ
Open programs or documents.  
Open the Help and Support Center.  
Start a search.  
Open the Control Panel to view or change settings.  
Using the All Programs menu  
To find the software programs on your computer:  
1 Click the Windows Start Button  
2 Click All Programs.  
on the taskbar.  
The All Programs menu displays a list of folders organized according to task  
(select models only).  
A folder contains a list of items. Each item is actually a shortcut, or link, to a program, a  
document, or another folder. The Music folder, for example, contains shortcuts to the  
programs that you use to play music CDs.  
94 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Organizing the All Programs list  
To change the name of an item:  
1 Right-click the item.  
2 Click Rename.  
3 Type the new name, and then press Enter on the keyboard.  
4 Click Yes in the message that appears.  
To copy an item:  
1 Right-click the item.  
2 Click Copy.  
3 Go to the desktop or folder, right-click an empty area, and then click Paste.  
If you use Add or Remove Programs in the Control Panel to delete a software program, the  
shortcut in All Programs may not be removed. To remove a shortcut:  
1 Click the Windows Start Button  
2 Click All Programs.  
3 Click the folder.  
on the taskbar.  
4 Right-click the shortcut, and then click Delete.  
Using the Control Panel  
The Control Panel is where you can set up or change properties and settings for the  
monitor, the keyboard, the mouse, the modem, a network connection, and other  
components and features of the computer. The Control Panel also provides tools for  
changing system performance, adding hardware, adding or removing programs, and  
other tasks.  
To open the Control Panel:  
1 Click the Windows Start Button  
2 Click Control Panel.  
on the taskbar.  
Introducing Your Computer Software 95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Resizing Windows  
All windows have three buttons in the upper-right corner. The middle  
button is either the Maximize button or the Restore Down button,  
depending on the state of the window.  
Feature  
Name  
Description  
Minimize Collapses the window to the taskbar (but does not close it).  
To bring the window back up, click the taskbar button with  
the name of the window.  
Maximize Expands the window to the full-screen size.  
Restore  
Down  
Reduces the window from full-screen size, so that it covers  
only a portion of the screen.  
Close  
Closes the window, and stops the program or task.  
Resize  
Resizes a window (not available when window is  
maximized). Move your mouse cursor over any window  
border until the cursor becomes a double-headed arrow.  
Click and hold down the left mouse button. Drag the border  
to the left or right to change the width. Drag the border up or  
down to change the height.  
Scroll bar Appears in a window when the information does not fit on  
one screen. Clicking and dragging a vertical scroll bar  
moves the screen up and down. Clicking and dragging a  
horizontal scroll bar moves the screen left and right.  
Working with Digital Images  
You can connect a digital image source, such as a digital camera or a digital video  
camera, to the computer either directly or through a docking station. Digital picture files  
that you copy or download from the device appear in the Pictures folder.  
Digital cameras and other digital imaging devices use memory cards, or media, to store  
digital picture files. You can copy digital picture files from the memory cards used by  
digital cameras and other digital imaging devices by using the memory card reader (select  
models only).  
96 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
About the Internet  
This section describes connecting to and using the Internet, including how to use a Web  
browser and electronic mail (e-mail).  
Use the Internet to search for information or services on the Web, or to retrieve, read, or  
send e-mail messages.  
The Internet is a group of computers that communicate with each other through telephone  
lines, digital services, or cable lines. Each Internet computer is independent, and its  
operators choose which files to make available to users of the Internet. To connect your  
computer to the Internet and use the information and services available there, you need an  
Internet Service Provider (ISP).  
ISPs are businesses that give you access to the Internet, and most of them provide e-mail  
service. ISPs usually charge a monthly fee for their services. When your computer connects  
to the Internet, it is actually communicating with the Internet computer belonging to the ISP.  
The ISP verifies your account, and then provides you access to the Internet. You use a Web  
browser program to search for and display Web site information. Some ISPs allow you to  
choose a browser program, while others provide their own browser.  
Your connection to an ISP may be through a traditional telephone dial-up modem, local  
area network (LAN), cable modem, digital subscriber line (DSL), or asymmetric digital  
subscriber line (ADSL). (DSL, ADSL, and cable ISPs are not available in all countries/  
regions.)  
The World Wide Web (WWW), also called the Web, is a public part of the Internet used  
by individuals, companies, governments, and organizations. These individuals and groups  
have created millions of Web sites in support of their activities. A Web site consists of one  
or more Web pages. A Web page is a file or group of files that a user can access by  
entering the file location, or Uniform Resource Locator (URL).  
The URL identifies a Web site location, typically in the form http://www.name.extension  
(for example, http://www.hp.com). The URL may include the path to a specific file  
within that site. Each period, or dot, in the URL separates elements within the address. For  
example, you will see the URL extension .com used by companies. When you enter the URL  
into your browser address box and press the Enter key on your keyboard, the browser  
contacts that location and opens the Web page for you.  
Imagine that you are reading a newspaper. On page 1, you may read something like “For  
more details, see page 3, column 2.” You turn the page for more information. A hyperlink  
on a Web page works the same way, except that you move to the new page by clicking  
the hyperlink. The way that a hyperlink links files together is what gives the Web its name,  
because the Web weaves together and connects ideas from all over the world.  
Your e-mail address identifies the electronic post office box where people can send you  
electronic mail. E-mail addresses have the form name@domain.extension. The domain is  
usually the name of the ISP or organization. The extension usually identifies the type of  
organization. For example, if your name is Jane Jones, and XYZ is your ISP, your e-mail  
address might be JaneJones@xyz.com, with the extension .com indicating that XYZ is a  
company. For information on using e-mail, see “Sending and Receiving E-Mail.”  
Introducing Your Computer Software 97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using a Browser  
A Web browser program searches for and displays Web site information. How you  
explore the Internet depends on whether your ISP provides the browser or allows you to  
choose your own.  
Once you are connected to the Internet, your browser opens the home Web page. You can  
go to a different Web site by entering its address (such as http://www.hp.com) into  
the address box in the browser, and then pressing Enter on your keyboard. Or you can  
use the browser search feature to search for references to a specific word or phrase on  
the Web.  
Searching the Internet  
Most Web browser programs include a search feature. You may need to click a button or  
select a menu option to display the search feature, depending on the type of browser  
program. Type a question, or a word that describes the information that you want to find,  
into the Search box, and then press Enter.  
The Windows search feature includes direct use of Internet Explorer Search.  
NOTE: If your ISP provides the browser, you may not be able to use Internet Explorer to  
search the Internet.  
To begin a search:  
1 Click the Windows Start Button  
on the taskbar.  
2 Type a word or question; what you type automatically appears in the Start Search  
box. As you type, the search results appear in the left pane.  
3 Do one of the following:  
ꢀ
Click a result to open it.  
ꢀ
Click the X in the search window to clear the results of the search and return to the  
main list of programs.  
ꢀ
ꢀ
Click See all results to display a list of all found search items on the computer  
and for advanced options.  
Click Search the Internet to search the Internet by opening your browser.  
98 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Restricting Internet content  
The Internet provides you with a wide variety of information, but some information may  
not be suitable for every viewer. With Content Advisor (a feature of Internet Explorer),  
you can:  
ꢀ
ꢀ
ꢀ
ꢀ
Set up a password.  
Control Internet access.  
Set up a list of Web sites that people who use your computer cannot view.  
Adjust the type of content people can view with and without your permission.  
Once you set up restricted rating levels in Content Advisor, users can view Web sites and  
other pages that you have specified under the rating setup. However, to view unrated Web  
sites or pages, users must enter the Content Advisor password that you have set. This  
means that any unrated page, even Help and Support or Internet Explorer, is not viewable  
if the user does not know the password.  
To enable Content Advisor:  
1 Click the Windows Start Button  
2 Click Internet Explorer.  
on the taskbar.  
3 Click Tools, and then click Internet Options.  
4 Click the Content tab.  
5 In the Content Advisor area, click Enable.  
6 Click the General tab, click Create password, and type a password.  
7 Click OK, and then click OK again.  
To allow access to an unrated site or page you approve of:  
1 Open the Web site.  
2 When the password window appears, select the Always allow viewing or  
Allow viewing only this time option.  
Introducing Your Computer Software 99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Using the Norton Internet Security Antivirus  
Software  
When you use the computer for e-mail, network, or Internet access, you expose it to  
computer viruses. Computer viruses can disable or damage your operating system,  
software programs, or computer utilities.  
Antivirus software can detect most viruses, remove them, and, in most cases, repair any  
damage that they have caused. To provide ongoing protection against newly discovered  
viruses, you must keep antivirus software up to date.  
Norton Internet Security, an antivirus software program, is preinstalled on your computer  
and includes a free trial subscription of protection updates. You can enable Symantec’s  
™
LiveUpdate to obtain updates automatically whenever you are online. Hewlett-Packard  
strongly recommends that you protect the computer against new viruses beyond the trial  
period by purchasing an extended update service.  
Configuring and registering Norton Internet  
Security software  
When you first set up the computer, Norton Internet Security helps you to configure and  
register your copy of Norton Internet Security.  
Ensure that you set up Norton Internet Security before you start using the Internet.  
1 Double-click the Norton Internet Security icon on the desktop.  
Or  
Click the Windows Start Button  
on the taskbar, All Programs,  
Norton Internet Security, and then click Norton Internet Security.  
2 Click a task under Tasks & Scans, and then follow any onscreen instructions.  
For information about using and updating the Norton Internet Security software, open  
Norton Internet Security, and then click Help under Quick Links.  
Manually running a scan  
To select and run a scan:  
1 Double-click the Norton Internet Security icon on the desktop.  
2 Click the Norton Internet Security tab.  
3 Click the Tasks & Scans bar.  
4 Click Run a Scan.  
5 Select Run Full System Scan to scan your entire hard disk drives for viruses and  
security risks. Depending on the number of files on your computer, this may take  
several minutes.  
6 When the scan is complete, click Finish.  
100 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Setting a Full System Scan time  
To schedule a time for a Norton Internet Security Full System Scan:  
1 Double-click the Norton Internet Security icon on the desktop.  
2 Click the Norton Internet Security tab.  
3 Click the Tasks & Scans bar.  
4 Click Configure a Scan.  
5 Click Schedule Full System Scan.  
6 Click New.  
7 Set the frequency and time that you want the scan to run.  
8 When you are done, click OK.  
NOTE: If the computer is in Sleep mode, the Norton Internet Security program does not  
perform a scheduled antivirus scan.  
Setting up a Custom Scan time  
To create a Custom Scan for specific files, folders, and drives:  
1 Double-click the Norton Internet Security icon on the desktop.  
2 Click the Norton Internet Security tab.  
3 Click the Tasks & Scans bar.  
4 Click Configure a Scan.  
5 Click Manage Custom Scans.  
6 Click Create Custom Scan, and then click Next.  
7 Click Add Folders or Add Files. Place a check mark next to the files and folders  
that you want to scan, click Add, and then click Next.  
8 Type a name for your customized scan, and then click Finish.  
9 Click Schedule next to the customized scan that you just created.  
10 Click New.  
11 Set the frequency and time that you want the scan to run.  
12 When you are done, click OK.  
NOTE: If the computer is in Sleep mode, the Norton Internet Security program does not  
perform a scheduled antivirus scan.  
Introducing Your Computer Software 101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Sending and Receiving E-Mail  
E-mail enables you to send and receive letters, pictures, postcards, and even music and  
video clips.  
NOTE: E-mail may contain a virus in the message itself or as an attachment. To protect  
your computer, do not open any message that originates from an unfamiliar source or that  
appears suspect to you. Instead, delete such messages.  
Your computer comes with an e-mail program from Microsoft called Windows Mail (select  
models only). You may also use e-mail programs from other vendors. Some ISPs provide  
their own e-mail programs. You use an e-mail program to send, receive, and organize your  
messages. You can organize, read, and create new messages even when you are offline  
(not connected to the Internet).  
Using Windows Mail  
To set up Windows Mail, you first need some information from your ISP: your e-mail  
address, user name, password, the names of your incoming and outgoing e-mail servers,  
and perhaps some other details.  
The first time you start Windows Mail, make sure the computer is connected to the Internet,  
and follow the wizard to set up your account.  
To add an account in Windows Mail:  
1 Click the Windows Start Button  
2 Click All Programs.  
on the taskbar.  
3 Click Windows Mail.  
4 Click Tools, and then click Accounts.  
5 Click Add, E-mail Account, and then click Next.  
6 Follow the onscreen instructions to add your account.  
Using the e-mail program provided by your ISP  
Follow the instructions provided by your ISP to install its Web browser and e-mail program,  
and to set up and use your e-mail account. You can then send and receive e-mail when  
your computer is connected to your ISP.  
102 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Software Quick Reference Table  
(Select models only)  
Your computer includes a number of software programs that:  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Record and play CDs.  
Record data CDs.  
Import and edit video files.  
Record video CDs and DVDs.  
Organize digital media files.  
The following table describes the functionality that is specific to each of these programs. Use the table to determine  
which program to use to perform a task.  
Note that some of the programs that are listed may not be included with your model, and that this is not a  
complete list of all included software.  
To open any of these programs, click the Windows Start Button  
on the taskbar, click All Programs,  
select the program folder (for example, DVD Play), and then click the program name to open the software.  
With this program:  
You can:  
DVD Play  
(select models only)  
ꢀ Play DVD movies and video CDs (VCDs).  
ꢀ Play Blu-ray and High-Definition DVDs if the computer has a Blu-ray and  
HD DVD disc drive.  
ꢀ Use the Zoom and Pan features.  
ꢀ Create viewing bookmarks.  
HP Photosmart  
Essential  
(select models only)  
ꢀ View, organize, and print your photos.  
ꢀ Share your photos with friends and family.  
ꢀ Create electronic photo albums.  
ꢀ Edit your photos: crop, resize, flip, rotate, make black and white, change the  
contrast, and more.  
To open this program, click the Windows Start Button  
and then click HP Photosmart Essential.  
, All Programs, HP,  
Rhapsody  
(select models only)  
ꢀ Play music CDs, .mp3s, and other audio files.  
ꢀ Record music files.  
ꢀ Record a copy of an existing music or data CD to use on the computer.  
ꢀ Organize digital files into a library for recording or listening.  
Introducing Your Computer Software 103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
With this program:  
You can: (continued)  
muvee autoProducer  
(select models only)  
ꢀ Add your own style to your movies with music, pictures, titles, scene transitions,  
and captions.  
ꢀ Edit your home movies.  
ꢀ Save and burn multiple movie files to DVD.  
ꢀ Use the magicSpot feature to control the motion effects applied to your pictures.  
CyberLink Power2Go  
(select models only)  
ꢀ Record data and music files.  
ꢀ Record a copy of an existing music or data CD to use on the computer.  
ꢀ Create customized music CDs from CDs in your collection, or from .wav, .mp3,  
or .wma files. These CDs can be played in your home or car stereo.  
ꢀ Copy and share data files.  
ꢀ Create archive CDs or DVDs from files on your computer.  
ꢀ Copy video files.  
ꢀ Verify that the disc has been created without errors.  
CyberLink  
PowerDirector  
(select models only)  
ꢀ Record movie files to create VCDs and DVDs that you can play on some DVD  
players.  
ꢀ Copy and share video files.  
ꢀ Capture video files.  
ꢀ Edit video files.  
CyberLink LabelPrint  
(select models only)  
ꢀ Burn a label directly onto LightScribe-enabled CDs, DVDs, and mini-discs by  
using LightScribe technology.  
ꢀ Burn a label directly onto the disc’s label side by using Labelflash technology.  
ꢀ Print labels to attach directly onto a disc.  
HP Total Care Advisor  
(select models only)  
ꢀ Quickly organize the Web links you want to keep available to you on your  
desktop.  
ꢀ Comparison-shop using the convenient shopping search engine.  
ꢀ Get HP software and driver updates.  
ꢀ Get important messages from HP.  
ꢀ Access PC Health and Security and PC Help tools.  
104 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
With this program:  
You can: (continued)  
Backup My PC  
(select models only)  
ꢀ Create computer backup files to protect your data and other important files on  
your computer.  
NOTE: This software is included with the Personal Media Drive only.  
Microsoft Windows  
Movie Maker  
(select models only)  
ꢀ Import audio, video, and other media files from videotape, audiotape, Web  
cameras, or television broadcasts.  
ꢀ Record audio and video files to create a video project that becomes a  
Microsoft Windows Media source file with a .wmv extension.  
ꢀ Edit and preview files.  
ꢀ Send a movie in an e-mail or upload it to a Web server.  
ꢀ Add music files (.mp3).  
ꢀ Import audio files such as .mp3, .asf, or .wma; video files such  
as .wmv, .asf, .avi, or .mpg; or image files such as .jpg or .gif.  
ꢀ Create .avi and .wmv (Windows Media Video) files.  
NOTE: You may have a software update CD included with your computer. You may need to install this CD before  
using the DVD Writer/CD Writer drive. To do this, follow the installation instructions that came with the CD.  
Introducing Your Computer Software 105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
106 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Managing Files  
A file is any unit of information that is named and stored on the computer hard disk drive  
or other electronic storage media, such as a CD, diskette, or even in a digital camera. A  
file can be a document, picture, music, video, or other data. Almost everything that you do  
on the computer involves working with files.  
The computer can copy files to other storage media within component drives, such as  
diskettes, memory cards, CDs or DVDs, or it can send them to output devices, such as a  
printer.  
Organizing Files with Folders  
In Windows Vista, folders enable you to organize the files on the computer. Like paper  
folders within a filing cabinet, folders on the computer provide a way to group related files  
together.  
A folder can contain any type of file, and it can even contain other folders. Each file within  
a folder must have a unique name, but two different folders can have files with the  
same name.  
There are two methods for working with files and folders on the computer:  
ꢀ
The Computer view enables you to quickly see all the files and folders within a specific  
folder on the computer. It also contains links to common tasks for managing files, such  
as copying, moving, deleting, and renaming.  
To open the Computer view, click the Windows Start Button  
and then click Computer.  
on the taskbar,  
ꢀ
Windows Explorer enables you to quickly see all the folders and files on the computer.  
It also makes it easy to move or copy files from one folder to another.  
To open Windows Explorer, click the Windows Start Button  
and then click Windows Explorer.  
on the taskbar,  
To navigate the Computer and Windows Explorer views, double-click folders to open and  
display their contents. Click the Back arrow button to retrace the path through the opened  
folders.  
Managing Files 107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Creating Folders  
1 Click the Windows Start Button  
on the taskbar, and then click Computer.  
on the taskbar, and then click Windows  
Or  
Click the Windows Start Button  
Explorer.  
2 Navigate to the location where you want to place the new folder.  
3 Click Organize, and then click New Folder.  
4 Type a name for the folder, and then press Enter on the keyboard.  
Moving Files  
CAUTION: Do not move any file that is part of an installed program. Doing so  
can cause the program to become unusable.  
1 Click the Windows Start Button  
on the taskbar, and then click Computer.  
on the taskbar, and then click Windows  
Or  
Click the Windows Start Button  
Explorer.  
2 Find the file that you want to move, and then click it to select it.  
3 Click Organize, and then Cut.  
4 Find and open the folder in which you want to put the file.  
5 Click Organize, and then Paste.  
NOTE: You can also move files by dragging them into a new location. (You can have two  
or more Windows Explorer windows open at one time.) Select an item in Computer or in  
Windows Explorer, and then press and hold the right mouse button while moving the item  
into another folder. Release the mouse button and click Move Here to place the item in  
the new location.  
108 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Finding Files  
To find a file, you can use the Search box at the top of every folder, or the search box on  
the Windows Start Button menu, which searches the whole computer.  
To search from a folder Search box:  
1 Click the Windows Start Button  
on the taskbar, and then click Computer.  
Or  
Click the Windows Start Button  
Explorer.  
on the taskbar, and then click Windows  
2 Find the folder that you want to search. Search looks in the current folder and all  
subfolders.  
3 Click in the search box at the top of the window, and begin to type.  
The Search box filters according to what you type. It displays files if your term matches  
the file name, tags, or other file properties. It displays text documents if the term occurs  
in any of the text inside the document file.  
To search from the Windows Start Button menu:  
1 Click the Windows Start Button  
on the taskbar.  
2 Type a word or question; what you type automatically appears in the Start Search  
box. As you type, the search results appear in the left pane.  
3 Do one of the following:  
ꢀ
Click a result to open it.  
ꢀ
Click the X to clear the results of the search and return to the main list of  
programs.  
ꢀ
ꢀ
Click See all results to show the results in a folder for advanced options.  
Click Search the Internet to search the Internet by opening the browser.  
Managing Files 109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Renaming Files  
CAUTION: Do not change the file name extension (the last three characters of a  
file name, after the period). Doing so could make the file unrecognizable to  
the computer.  
1 Click the Windows Start Button  
on the taskbar, and then click Computer.  
on the taskbar, and then click Windows  
Or  
Click the Windows Start Button  
Explorer.  
2 Find the file or folder you want to rename, and then click it to select it.  
3 Click Organize, and then Rename.  
4 Type the new name, and then press Enter on the keyboard.  
NOTE: Another way to rename a file is to right-click the file, and then click Rename.  
Deleting Files  
CAUTION: Do not delete any file that is part of an installed program. Doing so  
can cause the program to become unusable.  
1 Find the file that you want to delete, and then click it to select it.  
2 Click Organize, and then Delete.  
3 Click Yes to confirm the delete and send the file to the Recycle Bin.  
If you make a mistake and need to retrieve the deleted file, see “Retrieving Files from the  
Recycle Bin.”  
NOTE: Another way to delete a file is to right-click the file, and then click Delete.  
Retrieving Files from the Recycle Bin  
If you discover that you need a file that you have deleted, you can usually retrieve it from  
the Recycle Bin. When a file is deleted, it goes to the Recycle Bin and stays there until the  
Recycle Bin is emptied manually or it is cleared to make room for more recently  
deleted files.  
1 Double-click the Recycle Bin icon on the desktop.  
2 Right-click the file that you want to retrieve, and then click Restore this item.  
The file is removed from the Recycle Bin and goes back to its previous location.  
110 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Copying Files  
1 Click the Windows Start Button  
on the taskbar, and then click Computer.  
on the taskbar, and then click Windows  
Or  
Click the Windows Start Button  
Explorer.  
2 Find the file that you want to copy, and then click it to select it.  
3 Click Organize, and then Copy.  
4 Find and open the folder in which you want to put the file.  
5 Click Organize, and then Paste.  
NOTE: You can also copy files by dragging them into a new location. Select an item in  
Computer or in Windows Explorer, and then press and hold the right mouse button  
while moving the item into another folder. Release the mouse button, and then select  
Copy Here to copy the item to the new location.  
Using a Printer  
For instructions on connecting and using a printer, refer to the user manual that came with  
the printer.  
Printers receive instructions from the computer by means of software programs called  
printer drivers. In many cases, the computer automatically finds the necessary printer  
driver for your particular printer to work with the computer. If it does not, follow the  
instructions that came with the printer to install the specific printer driver manually.  
You can print text and graphics from most software programs and Web sites if you have  
a printer connected to the computer, and if the computer has the necessary software  
installed for the printer.  
To print:  
1 Click File on the program menu bar, and then click Print.  
2 Select your printing options:  
ꢀ
Select the printer.  
ꢀ
Choose the page range (for example: all pages, current page, or range of  
pages).  
ꢀ
Determine the number of copies.  
3 Click OK or Print.  
Managing Files 111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
112 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using CD and DVD Media Drives  
Using the CD and DVD Drives  
Your computer can come with several types of CD or DVD drives that allow you to perform different tasks. What  
you can do depends on what kind of drive you have.  
Blu-ray  
HD  
Allows you to:  
CD-ROM CD-RW DVD-ROM DVD+RW/+R DVD+RW/+R DVD+RW/+R  
Read data  
from CDs.  
•
•
•
•
•
•
•
•
Play music CDs.  
Read DVDs.  
•
•
•
•
•
•
•
•
•
•
•
Record (burn) data  
or music to discs.  
•
Play DVD movies.  
•
•
•
•
•
•
•
Record (burn) DVD  
movies.  
Read Blu-ray discs.  
•
•
Record data to  
Blu-ray discs.  
Read HD discs.  
•
The combination (combo) drive is available on select models only. It combines the functions of two drives into one:  
either a DVD+RW/+R drive (DVD writer) and a CD-RW drive (CD writer), or a DVD-ROM drive and a CD-RW  
drive.  
Using CD and DVD Media Drives 113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Handling CDs and DVDs  
To avoid damaging a disc, follow these guidelines:  
ꢀ
ꢀ
ꢀ
Return the disc to the case when you are finished using it.  
Handle the disc by its outside edges or center hole only.  
Do not touch the unlabeled side of a disc or place the unlabeled side down on a desk.  
Doing so could scratch the surface of the disc.  
ꢀ
Store discs at room temperature.  
Inserting and removing CDs and DVDs  
CAUTION: Use only standard-shaped (circular) discs in the drives. Using  
non-standard discs, such as heart-shaped discs or business-card discs, may  
damage the drive.  
To insert a CD or DVD:  
1 With the computer turned on, press the Eject button near the front of the drive to open  
the disc tray.  
NOTE: On some computers, the drive is located behind a door on the front of the  
computer.  
2 Remove the CD or DVD from its case, holding the disc edges or center hole only.  
3 Gently place the disc in the tray with the label facing up or facing right if the CD drive  
is vertically positioned in the computer.  
NOTE: On a double-sided DVD, read the text around the center hole to determine  
which side (A versus B or Standard versus Widescreen) to play. Place the disc in the  
tray with the label facing up for the side that you want to play. If the CD drive is  
vertically positioned in the computer, place the disc with the label facing right for the  
side that you want to play.  
114 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4 Close the disc tray by:  
ꢀ
Gently pushing the tray into the computer.  
Or  
ꢀ
Clicking the open/close button on the control panel for the program that controls  
the drive.  
Or  
ꢀ
Pressing the media control open/close button or Eject button on the keyboard  
(select models only).  
Or  
ꢀ
Pressing the Eject button on the drive, if it is accessible.  
To remove a CD or DVD:  
1 With the computer turned on, open the disc tray by pressing the Eject button.  
2 Holding on to the disc edges or center hole only, lift the CD or DVD out of the tray.  
3 Place the disc in its case.  
4 Close the disc tray by gently pushing the tray into the computer.  
Compatibility Information  
An important feature of a DVD Writer/CD Writer drive is its high level of compatibility  
with other optical drives and CD and DVD players:  
ꢀ
ꢀ
The CDs that you create play in most home and car stereos as well as most computer  
DVD-ROM and CD-ROM drives.  
The DVDs that you create are compatible with some DVD video players and with most  
computer DVD-ROM drives.  
ꢀ
ꢀ
ꢀ
ꢀ
CD-R discs are more compatible with home and car stereos than CD-RW discs are.  
Blu-ray disc drives are required to play Blu-ray discs.  
Blu-ray disc drives can read Blu-ray discs and record to Blu-ray discs.  
HD disc drives are capable of playing HD discs but not recording HD data to disc.  
The DVD Writer/CD Writer drive is able to read from and record to almost every type of  
optical disc. Writing speed rates for the DVD Writer/CD Writer drive are fast, allowing  
quick recording times.  
Using CD and DVD Media Drives 115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Disc Features and Compatibility Table  
Can be  
recorded  
onto  
Plays in  
home or car  
stereo  
Plays in  
home DVD  
player  
Plays in  
Disc  
File type  
Data  
computer  
CD-ROM  
No  
No  
Yes  
Yes  
Yes  
Yes  
No  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
No  
No  
Yes  
No  
No  
Music  
Yes  
Yes  
Varies by model  
No  
CD-R  
Data  
Yes  
No  
Music  
Yes  
Varies by model  
Varies by model  
No  
CD-RW  
Data  
Yes  
No  
Music  
Yes  
Varies by model  
Varies by model  
No  
DVD-ROM  
DVD-RAM  
Data  
Yes  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
DVD movie  
Data  
Yes  
Yes  
Varies by model  
No  
DVD movie  
Data  
Varies by model  
Varies by model  
No  
DVD+R and  
DVD-R  
Yes  
DVD movie  
Data  
Yes  
Varies by model  
Varies by model  
Varies by model  
No  
Double-layer  
DVD+R/DVD-R  
Varies by model  
DVD movie  
Data  
Varies by model  
DVD+RW and  
DVD-RW  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
DVD movie  
Data  
Varies by model  
Varies by model  
Varies by model  
Varies by model  
Varies by model  
Varies by model  
Blu-ray DVD  
HD DVD  
VCD  
Movie  
Data  
Movie  
DVD movie  
NOTE: Some computers come with the double-layer DVD Writer. It supports single-layer and double-layer DVD media. Double-layer  
technology gives you greater capacity and allows you to store up to 8 GB* of data on double-layer DVD+R or DVD-R media.  
Double-layer is a new technology. Double-layer media compatibility varies widely with some home DVD players and DVD-ROM drives.  
*1 GB is defined as 1 billion bytes. 1 GB = 1 billion bytes when referring to hard disk drive capacity. Actual formatted capacity  
is less.  
For the latest disc compatibility information for your computer, go to the HP Support Web site at: http://www.hp.com/support  
NOTE: Double-layer DVD technology is supported by select models only.  
116 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Optical Drive Quick Reference Table  
Double- Combo  
Optical  
DVD-  
DVD- DVD+RW/+R layer  
CD-RW/ LightScribe  
BD HD  
drive can:  
CD-ROM CD-RW ROM  
RAM  
DVD-RW/-R DVD  
DVD  
DVD+RW/+R DVD+RW/+R  
Read CDs,  
CD-Rs, and  
CD-RWs.  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Read DVDs.  
No  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Read data on  
a CD.  
Play music.  
Yes  
No  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Record data  
or music to  
disc for  
storage or  
backup.  
View DVD  
movies.  
No  
No  
No  
No  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Record DVD  
movies.  
Play games.  
Yes  
No  
Yes  
No  
Yes  
No  
No  
No  
Yes  
No  
Yes  
No  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Create  
LightScribe  
label.  
Play  
Blu-ray DVD.  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
No  
Yes  
Yes  
Yes  
Play  
HD DVD.  
Record  
data to  
Blu-ray disc.  
Record HD  
No  
No  
No  
No  
No  
No  
No  
No  
No  
data to DVD.  
Using CD and DVD Media Drives 117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Blu-ray and HD Disc Drives  
If the computer came with a Blu-ray (BR) and high-definition (HD) disc drive, there are three  
programs that are designed specifically for use with this drive:  
ꢀ
ꢀ
ꢀ
DVD Play plays Blu-ray, high-definition (HD), and regular commercial DVD discs.  
PowerDirector is a video editing program for creating Blu-ray or DVD discs.  
PowerToGo is a Blu-ray disc recording (burning) program for different types of data  
storage, such as video, music, pictures, and other data. This program enables you to  
record data to Blu-ray, HD DVD, and other recordable DVD discs.  
NOTE: The BD HD DVD+RW/+R drive does not support recording high-definition data  
to disc.  
For more information about using these programs, see “Playing DVDs” and “Creating  
Audio and Data Discs.”  
118 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Using the Memory Card Reader  
Digital cameras and other digital imaging devices use memory cards, or media, to store  
digital picture files. The optional memory card reader (select models only) can read from  
and write to a variety of types of memory cards and the IBM Microdrive disk drive.  
The card reader is accessible directly on the front of the computer. It has four or two  
horizontal card slots, which accept the memory cards and the Microdrive disk drive.  
You can place media in one or more of the card slots and use each media independently.  
Place only one piece of media in a slot at one time.  
Each card slot has its own drive letter and icon. When you insert media, the display label  
may change to the title of the media, if a title is present.  
When you insert media, the Safely Remove Hardware window may appear. If it opens, or  
if you open the Safely Remove Hardware window by mistake, click Close.  
CAUTION: Do not click Stop in the Safely Remove Hardware window with the  
USB Mass Storage Device selected. Doing so removes the operating system  
recognition of the memory card reader from your computer, and you must  
restart the computer to see your memory card reader again.  
Using the Memory Card Reader 119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To use the memory card reader:  
1 Insert the media into the card slot until it stops.  
The activity light (A) on the memory card reader lights, and the computer  
automatically detects the media.  
NOTE: You must insert media correctly. Note the direction of the notched corner on  
the media. For more information, see “Media Insertion Guide.” CompactFlash and  
Microdrive are keyed and cannot be inserted incorrectly. Insert the receptacle edge  
(holes) of this media into the slot.  
2 Select a program to access your files. The computer opens a program, so that you can  
access the media contents. You can copy files from or to the media.  
Or  
If the AutoPlay window does not open, click the Windows Start Button  
on the  
taskbar, click Computer, and then double-click the Memory Card icon to display  
the files on the memory card.  
3 When you are finished, right-click the drive icon, click Eject, check that the activity  
light is on but not blinking, and then remove the media. A steady activity light  
indicates that the computer is not reading or writing the media card.  
CAUTION: Do not try to remove media when the activity light is blinking. Doing  
so may cause loss of data.  
Media Insertion Guide  
4-slot memory card reader (select models only)  
A Activity light  
B Upper-left slot  
C Lower-left slot  
D Upper-right slot  
E Lower-right slot  
120 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
4-slot reader  
location  
Card  
Insert the media  
Facing up  
SmartMedia (SM) memory card  
xD media  
B (upper-left) SM  
B (upper-left) xD  
C (lower-left) CF/l  
C (lower-left) CF/II  
C (lower-left) MD  
D (upper-right) SD  
Facing up  
CompactFlash Type I media  
CompactFlash Type II media  
Microdrive disk drive  
Secure Digital (SD) memory card  
Mini Secure Digital (MiniSD)  
Receptacle edge (holes)  
Receptacle edge (holes)  
Receptacle edge (holes)  
Facing up  
Facing up  
D (upper-right)  
MiniSD  
*
Memory Card  
MultiMediaCard (MMC)  
Facing up  
Facing up  
D (upper-right) MMC  
Reduced size MultiMediaCard  
D (upper-right)  
RSMMC  
*
(RSMMC)  
*
Facing up  
Facing up  
D (upper-right)  
MultiMediaCard Plus (MMC +)  
MMC Plus  
MultiMediaCard Mobile  
D (upper-right)  
MMC Mobile  
*
(MMC Mobile)  
Memory Stick (MS) memory card  
Facing up  
Facing up  
E (lower-right) MS  
E (lower-right) PRO  
Memory Stick (MS-Pro)  
memory card  
Memory Stick (MS-Pro Duo)  
memory card  
Facing up  
Facing up  
E (lower-right)  
*
PRO Duo  
Memory Stick (MS-Duo)  
E (lower-right)  
MS Duo  
*
memory card  
*Select models only. Not available in all countries/regions.  
NOTE: Some memory cards, such as CF Ultra/III, are not compatible with the memory  
card reader that came with the computer.  
Using the Memory Card Reader 121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
                     
2-slot memory card reader (select models only)  
A Activity light  
F Upper slot  
G Lower slot  
2-slot reader  
location  
Card  
Insert the media  
Secure Digital (SD)  
Memory Card  
Facing up  
(gold connector fingers down)  
F (upper)  
MultiMediaCard (MMC)  
Facing up  
F (upper)  
F (upper)  
(gold connector fingers down)  
Memory Stick (MS)  
Memory Card  
Facing up  
(gold connector fingers down)  
Memory Stick (MS-Pro)  
Memory Card  
Facing up  
(gold connector fingers down)  
F (upper)  
SmartMedia (SM)  
Memory Card  
Facing down  
(gold connector fingers up)  
F (upper)  
F (upper)  
xD media  
Facing up  
(gold connector fingers down)  
IBM Microdrive disk drive  
CompactFlash Type I media  
CompactFlash Type II media  
Receptacle edge (holes)  
Receptacle edge (holes)  
Receptacle edge (holes)  
G (lower)  
G (lower)  
G (lower)  
NOTE: Do not use SM and xD media in the memory card reader at the same time. Only  
the first one that is inserted is recognized by the memory card reader.  
122 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Understanding the Activity Light  
The memory card reader activity light is off when there are no media cards plugged into  
the slots.  
The light turns on when a media card is inserted into a slot.  
The light blinks when data is being transferred between the card and the computer.  
Formatting a Memory Card  
If you have not used the memory card before, or if the card has become corrupted, you  
may need to format the card before using it.  
NOTE: Some memory cards have a lock position. To view or edit your picture files, make  
sure that the memory card is in the unlocked position.  
1 Format the memory card in your digital camera. Follow the instructions that came with  
your digital camera.  
Or  
Insert the media into the correct card slot on the reader until it stops and locks into  
place. The activity light on the memory card reader lights, and the computer  
automatically detects the media.  
2 Click the Windows Start Button  
on the taskbar, and then click Computer.  
3 In the Devices with Removable Storage area, right-click the correct memory card icon.  
4 Select Format, and then type a label name into the label box.  
5 For best compatibility, select FAT as the file system settings.  
6 Click Start.  
7 Click OK in the Format Complete window, and then click Close.  
Using the Memory Card Reader 123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Troubleshooting the Memory Card Reader  
If you are having problems reading from or writing to a memory card, try the following:  
ꢀ
ꢀ
ꢀ
Some cards have a read/write or security switch on the card. Make sure that the  
read/write switch is set to Write Enabled before attempting to write data to the card.  
Make sure that the amount of data that you want to store is not larger than the storage  
limit of the memory card.  
Make sure that the memory card is one of the supported types: CompactFlash  
Type I and II, Microdrive, Memory Stick, Memory Stick Pro, MultiMediaCard, Secure  
Digital, SmartMedia, or xD media.  
ꢀ
ꢀ
Make sure that the memory card is fully inserted into the correct slot.  
Remove the memory card when the activity light is not blinking, and shine a flashlight  
into the empty slot. If any of the pins are bent, replace the memory card reader, or  
have the computer serviced if a pin is touching another pin. To straighten slightly bent  
pins, use the tip of a fine-point retracted ballpoint pen with the computer off.  
ꢀ
ꢀ
Inspect the ends of the memory cards for anything that could be blocking a proper  
connection. Clean the contacts with a lint-free cloth and small amounts of alcohol.  
Replace the memory card, if necessary.  
The memory card reader is a device that uses the Safely Remove Hardware task. This  
appears as a taskbar icon next to the time. Do not click Stop in the Safely Remove  
Hardware window. Doing so disconnects the drive. If this happens, restart  
the computer.  
ꢀ
ꢀ
Do not insert or remove memory cards when the activity light is blinking. Doing so  
may cause data loss, or it may permanently damage the card reader.  
Format a memory card before you use it. See “Formatting a Memory Card.”  
124 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using the HP Personal Media Drive and  
HP Pocket Media Drive  
The HP Personal Media Drive and the HP Pocket Media Drive (HP Media Drives) can be  
used as internal or external USB hard disk drives designed to quickly and easily increase  
the storage capacity and to transfer media files such as digital photos, music, videos, and  
other important files. You can also use the HP Media Drives to back up other drives on the  
computer.  
NOTE: The HP Personal Media Drive and the HP Pocket Media Drive are included with  
select models only. Both drives are sold separately.  
The HP Media Drives are designed to:  
ꢀ
Work with computers that have a USB port.  
ꢀ
Store large media files and personal files from digital cameras, digital video  
camcorders, and MP3 players.  
ꢀ
ꢀ
ꢀ
Quickly transfer files between PCs.  
Play media files.  
Back up your files. Perform system backups for added data security.  
For more information about using HP Media Drives with Windows Media Center, refer to  
the documentation on the HP Support Web site at: http://www.hp.com/support  
Using the HP Personal Media Drive and HP Pocket Media Drive 125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting the Drive  
The HP Media Drive is designed to work with most computers as an external drive that is  
connected by using a USB cable, but it also can be inserted into specifically designed  
HP computers. These computers have a special horizontal or vertical drive bay that  
connects to the drive by using an internal USB connector. The drive can be easily inserted  
and removed from the hard disk drive bay without turning off the computer. This is  
sometimes referred to as warm-swappable.  
The drive turns on when it is plugged into an active USB port. If the computer is turned on  
with the drive connected, the drive automatically turns on. When the USB cable for the  
drive is not plugged in or when the USB power from the computer is turned off, the drive  
automatically turns off. When the computer is in sleep mode (a reduced-power state), the  
drive remains turned on.  
WARNING: Do not move the computer with the HP Media Drive inserted in the  
bay or connected to a USB port on the computer. This can cause both damage  
to the drive and data loss.  
126 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Inserting the Drive into an HP Drive Bay  
1 Turn on the computer.  
2 In the horizontal position, insert the drive with the HP logo facing up and the HP  
product name right-reading. In the vertical position, the drive’s flat side is down, and  
the rounded side is up. Do not force the drive into the bay; it should slide easily into  
the bay.  
3 Slide the drive all the way into the drive bay until the drive is firmly connected to the  
internal connections. With the computer turned on and the drive inserted correctly, the  
power LED (B, D) on the front of the drive is lit.  
HP Media Drive fronts  
A Drive activity  
indicator light  
B Power on  
indicator light  
C HP Personal  
Media Drive guide  
ridges  
D Power/drive  
activity LED  
indicator  
HP Personal Media Drive (A, B, C)  
HP Pocket Media Drive (D)  
Using the HP Personal Media Drive and HP Pocket Media Drive 127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Connecting the Drive to a Computer Without a  
Drive Bay  
The HP Media Drives are designed to work with most computers as an external hard disk  
drive that you connect by using a USB 2.0 cable. If the computer has USB 1.1 ports, use  
two USB ports to insure that enough power is supplied. Most USB 2.0 ports can supply  
enough power so that only one USB connection is required.  
When connecting the drive to a computer without a drive bay, the HP Personal Media  
Drive requires a separate power supply in addition to a USB 2.0 connection. The  
HP Pocket Media Drive does not require a separate power supply because power is  
supplied through the USB 2.0 connection.  
NOTE: The HP Personal Media Drive comes with a built-in fan; the HP Pocket Media Drive  
does not come with a fan.  
To connect the drive:  
1 Turn on the computer.  
2 Plug the rectangular end of the USB 2.0 cable (E) into an available USB port on the  
computer. Plug the square end of the USB 2.0 cable (F) into the USB connector on the  
back of the HP Media Drive.  
NOTE: USB 2.0 uses only one USB connector. USB 1.x systems use both USB  
connectors.  
3 Install the software and drivers. Refer to the HP Media Drive documentation for more  
information.  
128 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Locating the Drive and Assigning a Drive Letter  
When you plug the drive into an USB 2.0 connector or insert it into an HP Media Drive  
bay, the operating system automatically assigns a letter to the hard disk drive. The  
assigned letter depends on other storage devices connected to the computer.  
To locate the drive:  
1 Click the Windows Start Button  
2 Click Computer.  
on the taskbar.  
3 Select the drive under Hard Disk Drives or Devices with Removable Storage. The  
default volume name of this drive is HP Personal Media Drive or HP Pocket  
Media Drive.  
You can rename the drive in the Computer window by right-clicking the drive, selecting  
Rename, and then typing in a new name. HP recommends renaming a drive if you have  
more than one external hard disk drive.  
You can permanently assign a drive letter to avoid the letter changing when you connect  
and disconnect this drive and other devices. Also, it is easier for a software program to  
locate the files on the HP Media Drive if a drive letter is assigned. Some programs may not  
be able to find files if the drive has a new drive letter.  
It is always best to remove the drive safely to avoid errors. See “Disconnecting the Drive.”  
To assign a drive letter:  
1 Click the Windows Start Button  
2 Right-click Computer.  
on the taskbar.  
3 Select Manage.  
4 Click Disk Management.  
5 Right-click HP Media Drive.  
6 Select Change Drive Letter and Paths.  
NOTE: To avoid multiple hard disk drives from using the same drive letter when  
connecting and removing the drives, assign the letter Z.  
7 Click Change.  
8 Select a letter from the drop-down menu, and then apply the changes by clicking OK.  
Using the HP Personal Media Drive and HP Pocket Media Drive 129  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the Drive  
When running for long periods of time, the aluminum case of the HP Media Drive may  
become very warm. This is part of the HP Media Drive’s advanced design and is  
completely normal.  
The built-in, low-noise fan is designed to turn on automatically at pre-set temperatures. If  
you are using the HP Media Drive connected externally to the computer, place the drive in  
a well-ventilated area.  
Transferring files to another computer manually  
You can transfer your computer profile information, which includes how the computer  
looks, as well as the personal files such as photos, music, or video you have created.  
To transfer your files manually:  
1 Connect the drive to the computer.  
2 Select your files, and then drag and drop them to the HP Media Drive in the Computer  
window.  
3 Disconnect the drive and then connect it to another computer.  
4 Select your files and then drag and drop them to the new computer’s hard disk drive.  
Disconnecting the Drive  
CAUTION: To avoid hardware damage and data loss, always disconnect the  
HP Media Drive safely when it is not saving or transferring files.  
You can safely remove the drive when it is not active. When the amber activity light is  
blinking, the drive is active, saving or transferring data. Removing the drive while the light  
is blinking may cause data loss or damaged files.  
130 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
To disconnect the HP Media Drive safely:  
1 Close all programs that may be accessing the HP Media Drive. Make sure that the  
activity light on the drive is off.  
2 Double-click the Safely Remove Hardware icon in the system tray at the  
bottom of the desktop. If this icon is hidden, click the arrows on the taskbar to  
display it. The Safely Remove Hardware window opens.  
NOTE: For some computers, this may be called the Unplug Hardware or Eject  
Hardware icon.  
3 Double-click USB Mass Storage Device to locate the HP Media Drive. USB Mass  
Storage Device may be listed twice. One may contain a memory card reader or other  
mass storage drive. Look for the label of this drive.  
4 Select HP Media Drive, and then click OK. The name of the drive may be different  
if you renamed it, or it may appear as Generic Volume followed by the assigned drive  
letter.  
A Safe to Remove Hardware message appears in the system tray, letting you know  
that the device is safe to disconnect.  
5 Click Stop to make sure the HP Media Drive is not active, and then click Close.  
6 Disconnect the drive from the computer.  
Troubleshooting the HP Media Drive  
Microsoft updates  
Make sure you have the latest Microsoft operating system service packs and other  
Windows updates installed on your system before you try to troubleshoot a drive problem.  
These service packs are issued to fix bugs, add drivers, and enhance the security features of  
your system. See http://support.microsoft.com for details about how to install service  
packs and Windows updates in your system. Contact Microsoft Customer Service for  
information about obtaining these system enhancements if you do not have Internet access.  
Using the HP Personal Media Drive and HP Pocket Media Drive 131  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Drive does not appear on my computer  
Try the following solutions in the order listed:  
1 Check to see if the drive is on. The power LED on the front of the drive should be lit.  
2 Check that the USB cable is securely and properly connected to the drive and the USB  
connector on the computer.  
3 While the computer is turned on, unplug the USB cable. Wait 10 seconds, and then  
reconnect the USB cable.  
4 See if the computer is recognizing the USB port you are using by checking in the  
Device Manager window. See the documentation that came with the computer for  
more information.  
Data transfer rate seems slow with my USB 2.0 adapter card  
The HP Media Drive operates as fast as the host adapter card allows (up to the maximum  
burst rate of 480MB/sec.). If you are having performance issues, make sure that the  
USB 2.0 card drivers are the most current available and are installed properly.  
HP Media Drive software has stopped working  
Reinstall the software. Refer to the software and drivers installation instructions that came  
with the HP Media Drive.  
Write Cache Enable does not stay enabled  
For protection of your data, Write Cache Enable is turned off with the HP Pocket Media  
Drive. For more information, go to: http://www.hp.com/support  
Administrator privilege for installing software  
Depending on the operating system, you may need to be logged on as the administrator to  
install software.  
To change a user’s account:  
1 Click the Windows Start Button  
on the taskbar.  
2 Click Control Panel, User Accounts and Family Safety, and then click User  
Accounts.  
3 Click Manage another account, and then click the account you want to change.  
4 Click Change the account type, select the account type you want, and then click  
Change Account Type.  
132 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing CDs, DVDs, or VCDs  
This section describes how to play CDs, DVDs, or VCDs by using Windows Media Center,  
Windows Media Player, or other audio and video programs.  
This section also describes using Music and radio, and changing DVD and audio settings.  
Using Music  
The Music area in Windows Media Center is a great way to play, organize, and back up  
your music files. It is designed to work with the Windows Media Player program.  
You can find and play your favorite music files and CDs that you have added to the music  
library and the Windows Media Player music library. In addition, you can listen to various  
Internet radio stations.  
There are several Windows Media Center music menus from which you can choose:  
ꢀ
ꢀ
ꢀ
ꢀ
Music library  
Play all  
Radio  
Search  
All these menu options are described in detail in this section.  
Playing CDs, DVDs, or VCDs 133  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Using Music with Windows Media Center  
You can copy digital music files and organize a music library by using music library in the  
Windows Media Center or by using the Windows Media Player program.  
Music files that are added to music library in the Windows Media Center and in the  
Windows Media Player are accessible from within Windows Media Center and the  
Windows Media Player.  
In Windows Media Center Music, you can:  
ꢀ
Play CDs or selected music tracks from your created music library in the Windows  
Media Center or the Windows Media Player.  
ꢀ
ꢀ
ꢀ
ꢀ
Select and edit a personalized list of songs in the playlist from the music library.  
Delete songs from a music library or a queue list.  
Burn your favorite songs to CDs.  
Back up your music tracks to a DVD or to an HP Personal Media Drive or other  
storage device.  
ꢀ
ꢀ
ꢀ
Listen to Internet Radio (select models only).  
Search music tracks and files.  
Organize your music by artist, album, song, composer, year, playlist, and genre.  
134 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using the music library  
Adding music to the music library  
When you add music files to the music library, they are placed into the music library in the  
Windows Media Center and the Windows Media Player. The added music files can  
immediately be found and played back using Music in Windows Media Center or the  
Windows Media Player.  
You can also add music files to the music library from within the Windows Media Player  
program. For more information about adding and deleting music files to the library, use  
the Windows Media Player Help menu.  
Adding music files from the hard disk drive  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 From the Tasks menu, click settings.  
3 Click Library Setup.  
4 Click Add folder to watch, and then click Next.  
Playing CDs, DVDs, or VCDs 135  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
5 Click Add folders on this computer, and then click Next.  
6 Use the arrow buttons on the keyboard or the remote control to select a location.  
When you find the folder that contains the music folder, select it by making sure an  
arrow appears next to the folder. Repeat this step to add additional folders, click  
Next, and then click Finish.  
7 Click OK.  
Adding music files from a CD  
To add the CD tracks to the Windows Media Center music library:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Music.  
3 Click music library.  
4 Insert a CD into the CD drive.  
5 Select albums.  
6 Select the album CD you want to add to the music library.  
7 Click Copy CD. The first time that you copy a music CD, you must select the  
copy-protection option, and then follow any onscreen instructions.  
8 After selecting the choices for copy options in the next few windows, click Next.  
9 Click Yes to begin copying tracks to the music library. This process may take several  
minutes, depending on the length of the music tracks.  
10 Click OK.  
NOTE: You can select Play Album, Add to Queue, Burn (CD/DVD), Edit Info,  
and Delete in the album details window from any of these options by clicking any album.  
136 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Deleting music files from the music library  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Music.  
3 Click music library.  
4 Click albums.  
5 Select the album that you would like to delete, and then click Delete.  
6 Click Yes when the Confirm Delete window is displayed.  
NOTE: To delete individual songs, click songs, right-click a song and then click Delete.  
Using supported music file types  
You can play the following types of digital audio files in Music. Refer to Windows Media  
Player Help for more information about supported file types.  
File extension  
.cda  
File type  
Audio CDs  
.wav  
Windows audio file  
MP3 audio file  
.mp3, .m3u  
.wma, .asx, .wmx, .wm  
Windows Media Audio file  
NOTE: Only supported audio file types are displayed in the Music window. Unsupported  
file types do not display or play.  
Playing CDs, DVDs, or VCDs 137  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Playing Music Files in Windows Media Center  
To open Windows Media Center, select Music by scrolling up or down in the Windows  
Media Center window, and then by clicking music library. You will find a few music  
albums and tracks listed in the Windows Media Center and Windows Media Player music  
library.  
To play music, click one or more songs, and then click play. You can also click play all  
to hear all of the tracks that are stored in Music.  
NOTE: You may not find any audio files when you click playlists for the first time unless  
you have already added audio files to your Windows Media Center and Windows Media  
Player music libraries. When you copy music files using Windows Media Center or  
Windows Media Player, the CD information is copied and displayed in Windows Media  
Center and in the Windows Media Player music library.  
NOTE: You can place all your music files into the Music folder or into other folders on the  
hard disk drive, but you need to add those files to the Windows Media Center or  
Windows Media Player music library for either program to be able to find and play them.  
138 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
If you insert a music CD when Windows Media Center is not open, the AutoPlay window  
appears and lists various options. You can select the Audio CD options by using the  
Windows Media Center or Windows Media Player. If you have another program set as  
the default audio player, Windows opens the program and begins playing the CD. You  
can set the AutoPlay defaults in the Control Panel.  
Changing the visualization settings  
You can change the visualization settings such as the alchemy, bars and waves, and  
battery settings. You can also set the visualization options to start visualizations when the  
music plays at the beginning of the song, always, or never.  
Click the Windows Start Button  
Center.  
on the taskbar, and then click Windows Media  
1 From the Tasks menu, click settings, and then click Music.  
2 Click Visualizations or Visualization Options.  
3 After making the changes, click Save.  
Playing CDs, DVDs, or VCDs 139  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Playing an album in Windows Media Center  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Music.  
3 Click music library.  
4 Insert a music CD into the CD drive.  
5 Click albums.  
6 Select the album that you want to play.  
7 Click Play Album.  
Playing a song in Windows Media Center  
You can play a song from anywhere in Music. You can select it from the songs list, or from  
the albums, artists, genres, composers and other lists. You can also play a single song from  
a playlist:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Music.  
3 Click music library.  
4 Click songs. The list displays all of the songs in the library.  
5 Use the arrow buttons on the remote control or the arrow keys on the keyboard or  
select a song by moving the mouse and clicking the song.  
6 Click Play Song to play it.  
NOTE: You can select View Queue, Visualize, Play Slide Show, Shuffle,  
Repeat, and Buy Music in the now playing window while you play a music track.  
You can select Add to Queue, Buy Music, Edit Info, and Delete in the song details  
window while you play a song.  
140 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Creating a Queue in Windows Media Center  
A queue is a temporary list of songs that is created in Music as you select songs, albums,  
or playlists to play. You can continue to add songs, or you can delete songs from  
the queue.  
You can create a queue and save it as a playlist that you can access in Windows Media  
Center or the Windows Media Player.  
1 From the Music window:  
ꢀ
Select music library, select songs, and then use the arrow keys to select a song  
you want, or move the mouse over the songs. Click the song that you would like to  
add to the queue, and then click Add to Queue.  
Or  
ꢀ
Select albums or playlists, select an album or a playlist, and then select Add  
to Queue to add the entire album or playlist to the queue.  
2 Use the Back button on the remote control or the Backspace key on the  
keyboard to go back to the songs, albums, or playlists menus if you want to  
select more songs to add to the queue list. Repeat step 1. Or click the mouse on  
the left arrow on the top left of the screen to go back.  
3 After you add the last song for the queue list, select play all. All of the songs in the  
queue list are played in the order you have selected them.  
4 While the queue is being played, you can view the queue by selecting  
View Queue. You can edit or clear a queue, save it as a playlist or burn a queue list  
on a CD or a DVD. You can also select to shuffle the songs in the queue list.  
Finding and Playing an Album in  
Windows Media Center  
1 From Windows Media Center, click Music, and then click music library.  
2 Use the arrow buttons on the remote control, or the arrow keys on the keyboard or the  
mouse, to select an album, and then press OK on the remote control. Press the Enter  
key on the keyboard or click the album to select the album and see the album details.  
Using album details  
In the album details window, you can select from:  
ꢀ Play to play the album.  
ꢀ Add to Queue to add to a queue list.  
ꢀ Burn to burn the tracks on a CD or a DVD.  
ꢀ Edit to edit the information of the album.  
ꢀ Delete to delete the album.  
Playing CDs, DVDs, or VCDs 141  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
1 Click Play Album to play the album from the album details window.  
2 The now playing window opens, and the album starts playing.  
3 In the now playing window, you can also select:  
ꢀ View Queue to view an ordered list of all tracks that will be played on the  
album.  
ꢀ Visualize to view a moving picture while listening to a song.  
ꢀ Play Slide Show to play a slide show while the album is playing.  
ꢀ Shuffle to rearrange the play order.  
ꢀ Repeat to play the album again.  
ꢀ Buy Music to connect to the Internet, find CD information, and buy music CDs.  
ꢀ
To go back to Windows Media Center, press Start on the remote control, or click  
the left arrow on the top left of the screen.  
4 To return to the previous window, press the Back button on the remote control  
or the Backspace key on the keyboard, or click the left arrow on the top left of  
the screen to go back.  
Using Search in Windows Media Center  
Searching for music tracks and files  
You can search for music files if you cannot locate them:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Music, and then double-click search.  
3 To search, enter letters by using either the alphanumeric keypad on the remote or the  
keyboard. The search begins when you enter the first letter.  
142 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Creating a Playlist in Windows Media Center  
A playlist is a customized list of songs that you can keep to play later or record to a CD.  
Using playlists, you can group various digital music files together and determine the order  
in which you want the files to play.  
You can create a playlist that includes several tracks from various CDs or even a playlist  
that contains background music for a slide show.  
You can create playlists in Windows Media Center or the Windows Media Player.  
To create a playlist:  
1 Select Music, select music library, and then select either albums, artists,  
playlists, songs, or genres.  
2 Use the arrow buttons on the remote control, or the arrow keys on the keyboard, or  
use the mouse to navigate to and select the music that you want to add to the playlist.  
3 Press OK on the remote control, or press the Enter key on the keyboard, or click the  
selection to select a song.  
4 Click Add to Queue to add the music to the list of music in the queue.  
Playing CDs, DVDs, or VCDs 143  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
5 Go back to the Windows Media Center. Click the mouse on the left arrow on  
the top left of the screen to go back to Windows Media Center.  
6 Click play all.  
7 Click View Queue.  
8 Click Save As Playlist, and give the playlist a name.  
9 Use the alphanumeric keypad to enter a name for the playlist, and then click Save.  
NOTE: If the computer is connected to the Internet, the CD track titles and cover art  
appear in Windows Media Center.  
Copying Music Files to CD in Windows Media Center  
To copy the music files to CD:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Tasks, and then click burn cd/dvd.  
3 A message opens asking you to insert media. Insert a blank CD-R disc, and then click  
Retry.  
144 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
4 Select a disc format, either Audio CD or Data CD, and then click Next.  
5 Use the arrow keys on the keyboard to select the Untitled text box.  
6 Use the alphanumeric keypad buttons on the remote control or the keyboard to enter a  
name for the CD, and then click Next. This will take you to the Choose Music  
window.  
7 Use the arrow keys to scroll through songs. You can select more songs by clicking  
albums, playlists, and other music menu options. A check mark appears next to  
the song when it is selected. Press the Back button on the remote control or click Add  
More in the Review & Edit List to select more songs from different menus. You can also  
change the name of the CD by clicking Change Name, and clear all selections by  
clicking Clear All in this window.  
8 Click Next when you have selected all the songs to record to CD.  
9 Click Burn CD to record your music to disc.  
10 Click Yes to confirm you want to burn a disc with these files.  
11 Click OK to do other things while the disc is being burned.  
12 Click Done when the recording is complete.  
IMPORTANT: HP supports the lawful use of technology and does not endorse or  
encourage the use of our products for purposes other than those permitted by  
copyright law.  
NOTE: For more information about writable media, refer to “Disc Features and  
Compatibility Table.”  
Playing CDs, DVDs, or VCDs 145  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to Online Radio Stations  
In the radio area of Windows Media Center, you can play, listen, and preset various  
online radio stations.  
1 From the Windows Media Center, click Music, and then click radio twice.  
2 Click presets to preset and organize your favorite radio stations.  
3 By clicking sources, you can access the Music and Radio menu.  
4 Click the right mouse button to view a list and to go to the settings menu.  
5 Click the right mouse button for the icons to appear to go to the previous menu.  
Playing Music CDs  
To play music CDs, you must have either a CD or DVD drive.  
ꢀ
Insert the music CD into the CD or DVD drive.  
ꢀ
The default audio program opens. If a dialog window opens, choose the program you  
want to use from the list. You may have to scroll down in the window to see all  
available programs.  
ꢀ
The music CD automatically begins to play.  
146 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Playing CDs with Windows Media Player  
NOTE: Some commercial music CDs are copy-protected and cannot be played with  
Windows Media Player. Such CDs come with their own (built-in) player that must be used.  
1 Insert the music CD or DVD movie into the drive.  
ꢀ
When the AutoPlay window opens, select Windows Media Player from the  
list. You may have to scroll down in the window to see Windows Media Player.  
Or  
ꢀ
If the Windows Media Player window does not automatically open, click the  
Windows Start Button  
on the taskbar, click All Programs, and then click  
Windows Media Player.  
2 To play the CD or DVD, click the Now Playing tab on the Windows Media Player  
taskbar. You can also control playback by using the media control buttons on the  
keyboard (select models only).  
NOTE: The computer must have a connection to the Internet to see CD information such as  
artist name, song titles, and album art.  
For more information on using Windows Media Player, click the drop-down arrow on the  
Player taskbar, and then click Help.  
Playing DVDs  
The computer must have a DVD drive to play DVD movies. Some computer models include  
a DVD drive that can also play Blu-ray DVDs (BD) and High-Definition DVDs (HD DVD).  
To play a DVD, you must have a DVD drive:  
1 Insert the DVD into the DVD drive.  
2 When the DVD dialog window opens, choose the program you want to use from the  
list. You may have to scroll down in the window to see all available programs.  
Or  
If the dialog window does not appear, click the Windows Start Button  
on the  
taskbar, click All Programs, and then click HP DVD Play or DVD Play BD/HD,  
or Power Cinema depending on the type of DVD drive and computer model that  
you have.  
3 Use the controls in the DVD program to play the DVD.  
4 To reduce the DVD Play window, double-click anywhere in the window. To return the  
display to full-size, double-click anywhere in the window again.  
Playing CDs, DVDs, or VCDs 147  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
Using Windows Media Center to play DVDs  
1 Click the Windows Start Button  
on the taskbar.  
2 Click Windows Media Center to open Windows Media Center.  
3 Scroll to TV+ Movies, and then click HP DVD Play.  
4 Use the mouse to operate the media controls to control the movie.  
5 To play the DVD in full-screen mode, double-click anywhere in the DVD Play window.  
Troubleshooting poor playback when  
playing DVDs  
If you experience poor playback, such as skipping, when playing DVDs with DVD Play or  
Power Cinema, try the following solutions in the order listed:  
1 If the computer includes Windows Media Center, try playing the DVD from within  
Windows Media Center. Windows Media Center automatically adjusts the display for  
the best screen resolution to allow optimal DVD playback.  
a Click the Windows Start Button  
then click Windows Media Center.  
on the taskbar, click All Programs, and  
b Scroll up to the TV + Movies menu, and then select HP DVD Play.  
Use the DVD controls to play the movie.  
2 Change the resolution of the display until the issue is resolved.  
c
a Click the Windows Start Button  
on the taskbar, click Control Panel, and  
then, under Appearance and Personalization, click Adjust screen resolution.  
b Move the Resolution slider to a slightly lower resolution, and then click Apply.  
c
Click Yes.  
d Try playing the DVD again. If the playback is still poor, repeat steps a to d until a  
better display resolution is found.  
3 Try reducing the size of the playback window.  
NOTE: Having a higher-end computer graphics (video) card and increasing computer  
memory may also improve DVD playback.  
148 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using country/region codes  
Most DVD discs have country/region codes embedded in the disc data that limit where the  
DVD movie can be played.  
The country/region number is usually placed over a world globe that is printed on the  
DVD packaging and disc. DVDs without country/region codes play on any player or drive  
in any country/region.  
WARNING: You can change countries/regions only five times before the  
country/region code locks and becomes permanent. Once the code locks, you  
can play DVDs from that country/region only. If the country/region code locks  
and you need help, contact Support.  
Playing DVD Movies in Windows Media Center  
(Select models only)  
Watching DVDs in Windows Media Center allows you to control the playback with the  
remote control. If you play the DVD in another program outside of Windows Media  
Center, you will not be able to use the remote control.  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Insert the DVD into the drive. If you have other media playing, Windows Media  
Center asks if you want to play the DVD. Select HP DVD Play. If you don’t select an  
option, the DVD automatically plays in full-screen mode after a few seconds.  
NOTE: To view more information about a DVD that you are watching, such as the  
DVD title, chapter title, genre, parental rating, length, and current position, press the  
i (More information) button on the remote control.  
Or  
If the DVD is already in the drive, select HP DVD Play. The DVD movie begins  
playing in full-screen mode.  
Playing CDs, DVDs, or VCDs 149  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
3 If a DVD menu appears, use the remote control or the mouse to select the DVD menu  
items and control the DVD movie playback.  
4 To stop playing the DVD, press Stop on the remote control or move the mouse to  
display the media controls, and then click the Stop button.  
5 Move the mouse for other icons to appear.  
NOTE: To view additional controls, click the right mouse button. A window pops up,  
displaying additional options such as: zoom, movie details, title menu, eject, and settings.  
Changing the DVD Settings  
You can change the DVD settings such as the DVD language, closed captioning, and  
remote control options.  
Click the Windows Start Button  
Center.  
on the taskbar, and then click Windows Media  
1 From the Tasks menu, click settings.  
2 In the Settings window, select DVD.  
3 Click DVD Language, Closed Captioning, or Remote Control Options.  
4 Select the settings, and then click Save.  
Changing the DVD movie language  
To select DVD language settings for subtitles, audio track and menu:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 From the Tasks menu, click settings, DVD, and then DVD Language.  
3 Use the arrow buttons on the remote control or the arrow keys on the keyboard to  
select (+) or (–). Press OK on the remote control, or press the Enter key on the  
keyboard, to scroll through the languages available.  
150 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4 When you find the language you want, click Save.  
5 To return to the main settings window, press the Backspace key on the  
keyboard or press the Back button on the remote control, or click the left arrow  
on the top left of the screen.  
Changing DVD remote control options  
To change the DVD remote control options:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 From the Tasks menu, click settings.  
3 In the settings window, click DVD.  
4 In the DVD Settings window, click Remote Control Options.  
5 After making the changes, click Save.  
Playing CDs, DVDs, or VCDs 151  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Changing DVD closed captioning  
You can change the DVD closed captioning options:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 From the Tasks menu, click settings.  
3 In the settings window, click DVD.  
4 In the DVD Settings window, click Closed Captioning.  
5 After making the changes, click Save.  
Changing DVD Audio Settings  
To select DVD audio settings for viewing the DVD:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 From the Tasks menu, click settings.  
3 Click TV.  
4 Click Audio. The TV Audio window opens.  
5 Select the speaker and sound options. Select the speaker output and the channel  
mode, if applicable. Click Save.  
152 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Playing DVDs with Windows Media Player  
The computer must have a DVD drive to play DVD movies.  
1 Insert the DVD movie into the drive.  
ꢀ
When the AutoPlay window opens, select Windows Media Player from the  
list. You may have to scroll down in the window to see Windows Media Player.  
Or  
ꢀ
If the Windows Media Player window does not automatically open, click the  
Windows Start Button  
on the taskbar, click All Programs, and then click  
Windows Media Player.  
2 To play the DVD, click the Now Playing tab on the Player taskbar, and then click the  
Play button. You can also control playback by using the media control buttons on the  
keyboard (select models only).  
For more information on using Windows Media Player, click the drop-down arrow on  
the Player taskbar, and then click Help.  
3 In the List pane, click a DVD title or chapter name. You can double-click a chapter to  
begin playing the movie at that point. You can also right-click a chapter and click  
Find DVD Info to find online information about the movie.  
Using DVD Play to Play DVDs, Videos,  
High-Definition DVDs, and Blu-ray DVDs  
Depending on the type of DVD drive that is included with the computer, you can play  
DVDs, HD DVDs, or Blu-ray discs. The front of the drive is labeled with the type of discs  
that the DVD drive can play. Some drives can play both Blu-ray and HD DVDs. This means  
a better movie viewing experience, greater picture quality, and more bonus content.  
Keep the following in mind when playing Blu-ray and HD DVDs:  
ꢀ
The DVD Play BD/HD DVD player software is capable of playing standard DVD  
movie discs; however, the enhanced features are available only with Blu-ray and  
HD DVD discs.  
ꢀ
ꢀ
HD DVD and Blu-ray movies play only through the DVD Play BD/HD DVD software.  
CPU power is dedicated to support HD DVD and Blu-ray playback functions. It is  
recommended that you close all other applications before and during HD DVD and  
Blu-ray playback.  
ꢀ
AACS keys are integrated into the computer for copy protection purposes. Occasional  
renewal of the AACS key is required, and easily done by connecting to the Internet.  
Playing CDs, DVDs, or VCDs 153  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
ꢀ
ꢀ
Some HD DVD and Blu-ray advanced features may not be supported.  
As HD DVD and Blu-ray are new formats containing new technologies, certain disc,  
digital connection, compatibility, and/or performance issues may arise, and do not  
constitute defects in the product. Flawless playback on all systems is not guaranteed.  
ꢀ
For some HD-DVD and Blu-ray titles to play, they may require a DVI or HDMI digital  
connection, and the display may require HDCP support.  
To play a DVD, you must have a DVD drive:  
1 Insert the DVD into the DVD drive.  
The default DVD program opens. If the DVD wizard window opens,  
choose the program that you want to use from the list. You may have to  
scroll down the window to see all available programs.  
2 Use the controls in the DVD program to play the DVD.  
NOTE: To use the DVD Play controls, you must use the mouse.  
NOTE: The Advanced Access Content System (AACS) key that DVD Play uses must be  
updated every seventeen months in order for it to play DVD titles. For more information  
about playing video clips, click the ? (Help) button in the DVD Play control bar.  
154 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing Video CDs (VCDs)  
To play a VCD you must have either a CD or DVD drive:  
1 Insert the VCD into the CD or DVD drive.  
The default video CD program opens. If the Video CD wizard window opens, choose  
the program you want to use from the list. You may have to scroll down in the window  
to see all available programs.  
2 Use the controls in the VCD program to play the VCD.  
Playing video CDs (VCDs) with  
Windows Media Player  
To play VCDs with Windows Media Player you must have either a CD or DVD drive:  
1 Insert the (VCD) into the DVD or CD drive.  
2 Select Play using Windows Media Player, and then click OK.  
Or  
If the program doesn’t open, click the Windows Start Button  
Programs, and then click Windows Media Player.  
, click All  
3 To play the VCD, click the Now Playing tab on the Player taskbar, and then click  
Play VCD. You can also control playback by using the media control buttons on the  
keyboard (select models only).  
For more information on using Windows Media Player, click the drop-down arrow on  
the Windows Media Player taskbar and then click Help.  
4 In the List pane, double-click a VCD chapter to start playing the VCD at that point.  
Playing CDs, DVDs, or VCDs 155  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
156 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using Windows Media Center  
Microsoft Windows Media Center lets you do amazing things with your computer. With a  
full range of easy-to-use digital entertainment features, you can experience movies, music,  
and photos like never before.  
Windows Media Center is simple and convenient to use. You can easily find and choose  
your media. You can play movies, listen to music, and view photos with a single remote  
control (select models only). Combine the powerful features of your computer with a home  
theater receiver to enjoy an even more dynamic entertainment experience.  
Windows Media Center is optimized for widescreen and high-definition displays. With the  
new onscreen layout of your photos, music, and videos, you can now see up to three times  
more content on a widescreen display than with previous versions of Windows Media  
Center.  
Using Windows Media Center 157  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Setting Up Windows Media Center  
The first time that you start Windows Media Center on the computer, a Windows Media  
Center setup wizard opens. You must complete each step in the setup wizard to be able to  
use all the features in Windows Media Center. The Windows Media Center setup wizard  
may take several minutes to complete. If there are steps that you still need to complete, you  
can go to the Settings menu to do so. See “Completing the setup wizard.”  
NOTE: For more information about setting up the computer, refer to the setup instructions  
that came with the computer.  
Completing the setup wizard  
If you did not complete the Windows Media Center setup wizard steps the first time  
through, you can complete or change your selections by using the following procedure.  
You need to complete all of the required setup steps to access all of the Windows Media  
Center features.  
1 Press the Windows Media Center Start button  
on the remote control, or, with the  
on the taskbar, and then click  
mouse, click the Windows Start Button  
Windows Media Center.  
2 Scroll up or down to the Tasks menu, and then select settings. Use the arrow keys on  
the keyboard or on the remote control to scroll right and left to see all of the Tasks  
menu items.  
3 Select General, Windows Media Center Setup, and then Run Setup Again.  
Follow the onscreen instructions to complete the wizard.  
NOTE: You can change the Windows Media Center settings in the Settings menu.  
158 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
The following are some of the items that are included in the setup wizard:  
ꢀ Check for your Internet connection. An Internet connection allows you to  
access media links, display information about your music CDs and DVDs, and  
download the Television Program Guide if your computer came with a TV tuner.  
NOTE: You must subscribe to an Internet Service Provider to have an Internet  
connection.  
ꢀ Optimize how Windows Media Center looks on your display. You can:  
ꢀ
ꢀ
ꢀ
Change display settings such as brightness, contrast, color, and centering.  
Test and adjust the display settings of the monitor, TV, or other display.  
Use the Windows Media Center video to help you change onscreen centering,  
sizing, aspect ratio (shape), brightness, contrast, color, and sharpness of the  
display with either the TV remote control or the monitor controls.  
ꢀ Set up your speakers. Select how many speakers you have, and test them.  
Speakers are sold separately for some models.  
ꢀ Set up your Music, Picture, and Video Libraries. Set up Windows Media  
Center to scan your Music, Picture, and Video folders for new media files. Windows  
Media Center can then automatically add these files to your media libraries. You can  
have Windows Media Center scan other folders or stop scanning a folder.  
Using Windows Media Center 159  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Windows Media Center Start Menu  
A Open the Windows Media Center Start menu.  
B Go back one screen.  
C Minimize the Windows Media Center window.  
D Resize the Windows Media Center window.  
E Close the Windows Media Center window.  
F Use arrow keys to scroll up and down, left and right through the submenu items.  
G Use media playback controls: Play, Stop, Pause, Skip, Fast-forward, Replay, Rewind,  
Record, Volume Up/Down, Mute, and Channel Up/Down.  
Windows Media Center Start menu items  
ꢀ HD DVD Play or Play DVD — See “Playing DVD Movies in Windows Media  
Center.”  
ꢀ Online Media — Get access to various photo, video, radio, TV, and various media  
providers.  
ꢀ Pictures + Videos — View digital pictures, play a slide show, or print photos.  
Watch home videos. See “Playing video CDs (VCDs) with Windows Media Player.”  
160 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
ꢀ Music — Play music files or music CDs, create and edit playlists, and record music  
files to CD. See “Using Music with Windows Media Center” and “Copying Music  
Files to CD in Windows Media Center.” Listen to internet radio station. See “Listening  
to Online Radio Stations.”  
ꢀ Tasks — Change program settings. See “Changing Windows Media Center  
Settings.” Add a Windows Media Center Extender device. Synchronize content from  
another device with the computer. Burn CDs and DVDs. See “Copying Music Files to  
CD in Windows Media Center.” Find utilities and programs.  
ꢀ Shutdown — Get access to the Shutdown, Restart, Sleep, Close, Log Off, and  
Media Only menus. Media Only mode gives you access to Windows Media  
Center, but not to the rest of the computer. See “Windows Media Center  
control menu.”  
NOTE: Some of the features and programs that are listed are for select models only.  
Windows Media Center Features  
You can control the Windows Media Center functions and navigate Windows Media  
Center windows by using the remote control (select models only), keyboard, or mouse. You  
can easily switch back and forth between them by either moving the mouse, or by pressing  
a button on the remote control or the keyboard.  
NOTE: Some of the Windows Media Center features listed are for select models only.  
Some of the components listed in the computer documentation, such as speakers and TV  
tuners, are optional or sold separately.  
You can run Windows Media Center side-by-side with other Windows software programs.  
It is possible to browse through your pictures, watch videos, and play music while using  
other Windows programs.  
With Windows Media Center, you can:  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Play back your digital videos.  
View your digital pictures or play them as a slide show with music.  
Easily print your photos.  
Browse, select, and play music CD files with full-screen visualizations.  
Record CD tracks to your media library.  
Play DVD movies. Resume playing your DVDs where you left off.  
NOTE: If your computer came with a rewritable DVD drive, the drive is able to read  
and record to DVD+/-R/-RW media.  
ꢀ
ꢀ
Listen to Internet radio stations.  
Access streaming music and video subscription services. Some music and video  
subscription services may not be available in all countries/regions.  
Using Windows Media Center 161  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
ꢀ
ꢀ
Open specific windows in Windows Media Center by using the shortcut buttons on  
the remote control.  
Easily back up your media files to CD, DVD, or another hard disk drive, such as the  
HP Personal Media Drive and HP Pocket Media Drive (sold separately).  
ꢀ
ꢀ
Use the Optimization setting to keep the computer running smoothly.  
Use Sleep mode to save power when the computer is not in use. Then, you can  
display the computer desktop instantly by touching a keyboard key or a remote  
control button.  
The right music for the moment  
In the Music section, you can quickly browse the entire music library by artist, song, or  
album title, as well as by genre, composer, or year. Windows Media Center automatically  
downloads thumbnails of album art, giving you a very visual way to find the albums that  
you want to hear. You can shuffle and repeat your music, create playlists, apply  
visualizations, and burn playlists to CD or DVD with the push of a button.  
You can also start a picture slide show directly from your music library when you are  
selecting or playing your music. If you subscribe to music services, you can now add this  
option directly to the Start menu, next to the Music Library.  
It is easy to search for and add music to your library from another Windows-based  
computer in your home.  
Playing Internet radio  
Windows Media Center can also play Internet radio. You can access various Internet  
radio Web sites.  
Sharing your digital memories  
With Windows Media Center, you can turn your simple photo collection into a cinematic  
slide show that can be shared on the computer or the television in the living room. The Play  
All option on the Start menu enables a full slide show of photos at the click of a button, and  
you can even enjoy the slide show with music from your music collection for a truly  
memorable experience.  
If you want to create a slide show with a soundtrack, you can easily create a playlist of  
photos and music to burn to DVD.  
In the Picture Library, you can navigate easily through your photos by folder or by the date  
on which they were taken, with thumbnails and highlighting that help you quickly identify  
the specific images or folders that you want to see. You can also perform basic editing  
functions, such as rotating or touching up pictures, either from within the Picture Library or  
during a slide show.  
162 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Transforming your living space into a theater  
In the Videos Library, you can easily play any of the home movies that have been imported  
from your video recorder. Windows Media Center has built-in support for  
high-definition video.  
Whether you are watching a DVD movie or your own home videos, Windows Media  
Center delivers a rich viewing experience with a high-quality digital sound system. Sit  
back, and enjoy the show.  
Online media  
Online Media is a link to various media providers, where you can find various media  
offers and services. The Online Media window is periodically updated by Microsoft. Some  
of the services that are listed may not be available in certain countries/regions.  
Your computer must be connected to the Internet to access the Online Media Web sites.  
Navigating Windows Media Center  
Opening Windows Media Center with a mouse  
You can use either the remote control or the mouse to open and navigate Windows  
Media Center.  
To use the mouse:  
1 Click the Windows Start Button  
Media Center  
on the taskbar, and then click Windows  
.
2 Move the mouse over the Windows Media Center Start menu items, and click a  
category to select it. To scroll the list of Start menu items, move the mouse pointer over  
the list until an item is selected, then continue moving the pointer up or down the list to  
see the items that are not displayed.  
3 After you select a menu category, scroll the mouse left or right, and then click an item  
to open that window.  
4 Move the mouse to display the Windows Media Center menu bar, and then  
click the back arrow at the top of the window to go to a previous window.  
5 Click the Windows Media Center Start  
icon at the top of the Windows  
Media Center window to return to the Windows Media Center Start menu.  
Using Windows Media Center 163  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Opening Windows Media Center with the  
Windows Media Center remote control  
You can use either the remote control or the mouse to open and navigate Windows  
Media Center.  
To use the remote control:  
1 Press the Windows Media Center Start button  
on the remote control.  
2 Use the arrow buttons on the remote control to select a Windows Media Center menu.  
3 Press the OK button to enter your selection and open that window. To scroll the list of  
Start menu items, use the arrow buttons until the item is highlighted, and then continue  
moving the arrow buttons down the list to see the items that are not displayed.  
4 Press the Back button on the remote control to go to a previous window.  
5 Press the Windows Media Center Start button  
on the remote control to return to the  
Windows Media Center Start menu.  
Using the Windows Media Center menu bars  
When you move the mouse, the Windows Media Center menu bars appear. These menu  
bars allow you to access:  
ꢀ
ꢀ
ꢀ
ꢀ
Media controls (play, fast-forward, rewind, stop, and others).  
The back arrow.  
Window-control icons (minimize, maximize, and close).  
The Windows Media Center icon that takes you to the main Windows Media  
Center menu.  
If you use the remote control, or if you stop using the mouse (after 5 seconds), the  
Windows Media Center menu bars become hidden.  
NOTE: You can use the resize buttons to switch to the desktop or to run Windows Media  
Center side-by-side with another program.  
164 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Selecting items in Windows Media Center  
You can control the Windows Media Center functions and navigate Windows Media  
Center windows by using the remote control, the keyboard, or a mouse.  
In the Windows Media Center windows, a selected item such as a folder, file, or menu  
item is either highlighted or moves to a zoomed-out position.  
To select items in Windows Media Center, use the mouse, the arrow keys on the keyboard  
or the arrow buttons on the remote control, and then press the Enter key on the keyboard  
or the OK button on the remote control to enter your selection.  
If you have media playing, such as music or a slide show, it appears in an inset window in  
the lower-left corner. To switch from watching media in the inset window to watching it in  
full-screen mode, use the arrow buttons on the remote control or the arrow keys on the  
keyboard to select it, and then press the OK button on the remote control or the Enter key  
on the keyboard.  
Inset window  
Full-screen mode  
Using Windows Media Center 165  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Windows Media Center control menu  
To access the control menu in Windows Media Center, move the mouse to display the  
menu bars:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 From the Tasks menu, click shutdown to open the window with the menu  
items that are listed in the following table. Use the arrow keys on the remote  
control or the keyboard to scroll to the right or left of the screen to select the  
other options.  
Icon  
Action  
Closes Windows Media Center.  
Logs off and ends your Windows Media Center session and switches  
users.  
Shuts down the computer.  
Restarts the computer.  
Puts the computer in a power-reduced or Sleep mode.  
Puts the computer in Media Only mode, which gives you access to  
Windows Media Center, but not to the rest of the computer.  
NOTE: This option is listed in the Tasks menu.  
Changing Windows Media Center Settings  
In the Windows Media Center settings window, you can change settings for viewing your  
pictures and slide shows, and for controlling sound and the display of all of the Windows  
Media Center windows.  
To change your Windows Media Center settings:  
1 Press the Windows Media Center Start button  
on the remote control, or, with the  
on the taskbar, and then click  
mouse, click the Windows Start Button  
Windows Media Center.  
2 From the Tasks menu, select settings.  
166 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
3 Select a settings category.  
4 Select one of the settings listed. Then, use the arrow keys on the keyboard or the  
arrow buttons on the remote control to select an option, or follow the onscreen  
instructions.  
5 Select Save to save your changes.  
Windows Media Center Settings categories  
ꢀ General  
ꢀ Startup and Window behavior.  
ꢀ Visual and Sound Effects to set transition animations, sounds, and  
background colors when navigating in Windows Media Center.  
ꢀ Program Library Options to allow programs in the Program Library to control  
the media experience and access media information in Windows Media Center.  
Also, you can hide Internet security warnings.  
ꢀ Windows Media Center Setup to configure an Internet connection and  
speakers, run Windows Media Center setup again, and configure the TV display  
or monitor.  
ꢀ Parental Controls to block unwanted TV channels and movie ratings, change  
access code, and reset parental controls.  
NOTE: The parental controls, captions display, radio, and TV settings listed in  
Windows Media Center do not apply to computer models that do not include a  
TV tuner.  
ꢀ Automatic Downloads Options to get media information about CDs, DVDs,  
and movies from the Internet.  
ꢀ Optimization to keep the computer running smoothly by performing various  
tasks on a regularly scheduled basis. The Optimization setting closes and then  
opens Windows Media Center at a specific time each day that you determine.  
ꢀ TV to set up TV signal, audio, and closed captioning (not all channels support closed  
captioning). You can download or edit the Television Program Guide, set hard disk  
drive recorder storage space, configure the display, and set recording defaults.  
ꢀ Pictures to set slide show settings.  
ꢀ Music to select visualizations or song information to display when playing a song.  
ꢀ DVD to select a language for subtitles, audio tracks, and menus of your DVDs;  
program the Skip and Replay buttons on the remote control for your DVDs; and select  
closed captioning.  
ꢀ Library Setup to have Windows Media Center scan specified computer folders for  
media files.  
ꢀ Radio to organize or delete preset radio stations.  
Using Windows Media Center 167  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
To view information for your computer, go to the Support Web address that is listed in the  
Limited Warranty and Support Guide, and search for your model’s name and number. The  
product model is on the lower front of the computer.  
To find the online documentation for your product, search for your model number, and then  
click Manuals.  
NOTE: Information and guides are associated with specific computer model numbers.  
Some models do not have guides or manuals available on the Web site.  
Using Windows Media Center power settings  
When the computer is in Sleep mode, it appears off, but you can actually still perform  
tasks such as recording TV programs or music files. Sleep mode turns off the display and  
mutes the audio.  
NOTE: The audio or video of TV recordings is not affected when the computer is in  
Sleep mode.  
You can activate Sleep mode by pressing the Sleep button on the computer,  
keyboard, or remote control.  
You can return to the desktop almost instantly by pressing any Sleep button again,  
by pressing any key on the keyboard, by moving the mouse, or by pressing any button on  
the remote control.  
To change the computer power settings:  
1 Click the Windows Start Button  
Panel.  
on the taskbar, and then click Control  
2 Click System and Maintenance.  
3 Click Power Options.  
4 Select the Balanced, Power saver, or High performance option.  
5 Click Change plan settings.  
6 Click the drop-down arrow next to turn off the display to select a time span to turn off  
the display.  
7 Click the drop-down arrow next to put the computer to sleep to select a time span for  
putting the computer into Sleep mode.  
8 Click Save changes.  
168 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Creating Audio and Data Discs  
This chapter contains the procedures that you must perform to record (or burn) files to  
recordable CD and DVD discs. It also includes information about labeling the discs by  
using the LightScribe labeling technology that is available on select models or by creating  
a paper label.  
The computer includes one or more CD, DVD, or combination optical drives that are  
capable of recording. Additionally, the computer may include the following software  
programs for recording to CDs or DVDs:  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
CyberLink Power2Go (select models only)  
CyberLink PowerDirector (select models only)  
CyberLink LabelPrint (select models only)  
Windows Vista  
Windows Media Center  
These programs include features that enable you to copy, archive, and manage music,  
video, image, and data files, and then record the files to CDs or DVDs. You can also use  
Windows Media Player to download and copy music files to a portable device or  
memory card.  
IMPORTANT: HP supports the lawful use of technology and does not endorse  
or encourage the use of our products for purposes other than those permitted by  
copyright law.  
NOTE: Burn is an industry term used to describe the recording of information onto a DVD  
or CD. Optical recording uses a laser beam to place information onto the disc, thus the  
term burning.  
Creating Audio and Data Discs 169  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Erasing Rewritable Discs Before Recording  
Previously recorded files on rewritable discs (CD-RW, DVD-RW, or DVD+RW) must be  
erased before recording new files. CD-R, DVD-R, and DVD+R discs cannot be erased.  
To erase a rewritable disc in CyberLink Power2Go:  
1 Click the Windows Start Button  
click CyberLink DVD Suite.  
on the taskbar, All Programs, and then  
2 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click Power2Go.  
3 Click the Disc Utilities icon in the Select a Burning Task window, click Erase Disc,  
and then click OK.  
4 Insert the rewritable disc that you want to erase.  
5 Click the Quick erase or Full erase option, and then click the Erase button.  
6 Click OK when the disc has been erased.  
Working with Audio CDs  
You can create audio CDs that play in the car or home CD player, and on computers. You  
can create two main types of music CDs:  
ꢀ Uncompressed — Typical CD format, like you would purchase on a commercial  
CD. This type of CD holds 10 to 20 songs, depending on their length.  
Uncompressed files can be burned on CD-Rs (which play in most home and  
car stereos, DVD players, and computers) or CD-RWs (which play only in some  
stereos, DVD players, and computers).  
The procedure for creating this type of CD is described in “Creating audio CDs.”  
ꢀ Compressed — Files are burned to a disc using a compressed file format  
(.mp3, wma, or .m4a). The smaller file format enables you to fit approximately ten  
times as many songs onto the disc (depending on length and format).  
Compressed files can be burned to CD-Rs, CD-RWs, DVDs, DVD-RWs, or DVD+RWs  
(select models only). Compressed files can only be played on computers, CD players,  
or DVD players that support the file format that you use to create the disc (.mp3 is most  
commonly supported). For file format compatibility, check the documentation for the  
device in which you intend to play the disc. You may hear a slight loss of sound  
quality using compressed audio files.  
For more compatibility information, see “Disc Features and Compatibility Table.”  
170 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
CyberLink Power2Go allows you to create closed-session or multisession CDs and DVDs.  
For closed-session CDs and DVDs, you must record or copy all files on one disc in one  
recording session. For multisession CDs and DVDs, you can record or copy files in several  
sessions until the disc is filled or until you close the session.  
NOTE: Music files can be recorded repeatedly on a rewritable CD-RW disc, but all  
previously recorded files must be erased first. CD-R discs cannot be erased.  
IMPORTANT: HP supports the lawful use of technology and does not endorse  
or encourage the use of our products for purposes other than those permitted by  
copyright law.  
Audio CD tips  
When recording music files, it is important to note that:  
ꢀ
As you add music files in the recording session, the software calculates and displays  
the amount of recording time that is available to record additional music files. If you  
try to record more than a standard CD can hold, a message opens warning you that  
all the tracks may not fit on the disc.  
ꢀ
ꢀ
ꢀ
ꢀ
If the recording fails, manually select a slower recording speed, if available, each time  
you make a recording. Refer to the Help menu in the selected software program  
for more information about selecting a slower recording speed.  
If you change the write speed of the recording, run a Write Simulation test to verify  
that the burner can burn to the disc at the selected speed without causing recording  
errors.  
You can select the “Enable buffer underrun protection” option when burning a disc to  
ensure that data is written to disc without interruption. An interruption in data can  
result in an unusable disc.  
You can select the “Verify recorded data” option to compare recorded data to the  
source data to ensure accurate burning.  
IMPORTANT: HP supports the lawful use of technology and does not endorse  
or encourage the use of our products for purposes other than those permitted by  
copyright law.  
Creating Audio and Data Discs 171  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Before you begin creating discs  
ꢀ
Save all work, and close all open programs.  
ꢀ
Turn off the screen saver.  
Creating audio CDs  
This section provides instructions for burning an audio CD that can be played in most  
home and car CD players.  
To create an audio CD:  
1 Insert a writable CD into the disc-burning drive.  
CD-R discs play in most home and car stereos, DVD players, and computers. CD-RW  
discs play only in some stereos, DVD players, and computers.  
2 Click the Windows Start Button  
click CyberLink DVD Suite.  
on the taskbar, All Programs, and then  
3 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click Power2Go.  
4 Select the Music Disc icon.  
5 Select the disc type, CD or DVD, select the content type, and then click OK.  
6 Locate the music files that you want to add, and then click them and drag them to the  
bottom half of the Power2Go window.  
7 When you are done adding files, click the Burn icon in the toolbar.  
NOTE: For more help using CyberLink Power2Go, click the Help icon in the  
program.  
8 Select the recording options. See “Audio CD tips.”  
9 Click Burn to begin recording your music files to disc.  
10 Click OK when the audio CD is completed.  
172 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Creating video discs  
This section provides instructions for creating a video disc. You can create a video disc  
from files on the computer hard disk drive or directly from a digital video camera.  
1 Insert a writable disc into the disc-burning drive.  
2 Open the CyberLink PowerDirector program by clicking the Windows Start  
Button  
, All Programs, and then clicking CyberLink DVD Suite.  
3 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click PowerDirector.  
4 Click the File menu, select Import, and then click Media Files. Browse to your file  
and click Open to import it into your video project.  
Or  
Click the Capture button:  
a Select a capture device, such as DV Camera, TV, PC Camera, CD, or DVD  
from the toolbar.  
b Click the Play button to playback your video.  
c
Click the Record button when you find the place in your file you want to add to  
your video project and then click the Stop button to end the recording.  
d When the Capture File Name window opens, type in a name for your captured  
video file, and then click OK. Your captured video is added to your video project.  
5 After you have imported or captured all of your video files, click the Edit button. Use  
the editing tools on the left side of the window to edit your video file.  
6 Click the Produce button. Select your settings and then click the arrow button to  
continue. Click the check mark button to begin rendering your video.  
7 Select a file type, such as video file or streaming file, and then click the arrow  
button to continue.  
8 Select your settings and then click the arrow icon to continue.  
9 Click the check mark icon to begin rendering your video.  
10 Click the Create Disc button. You can add a style or menu buttons to your video.  
11 Click the Burn Disc icon, and then select your recording options.  
12 When ready to create the video disc, click OK.  
13 When the recording is complete, click OK.  
NOTE: For more help using CyberLink PowerDirector, click the Help menu, and then click  
PowerDirector Help.  
Creating Audio and Data Discs 173  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Copying a disc  
The following section explains how to make a copy of an existing CD or DVD.  
Copying a disc using two disc drives  
If you have two disc drives, you can copy a CD or DVD directly from one drive to the  
other. To copy a DVD by using this method, you must have two DVD drives. Otherwise, use  
the steps in the next section to copy the DVD.  
To copy a CD or DVD using two disc drives:  
1 Insert a writable CD or DVD into a disc-burning drive.  
2 Insert the disc that you want to copy into the other disc drive.  
3 Click the Windows Start Button  
click CyberLink DVD Suite.  
on the taskbar, All Programs, and then  
4 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click Power2Go.  
5 Click the Copy Disc icon, and then click OK.  
6 Ensure that the correct disc drives are selected.  
7 Click the Copy button.  
NOTE: For more help using CyberLink Power2Go, click the Help icon in the  
program.  
Copying a disc using one disc drive  
If you have only one disc drive, CyberLink Power2Go stores an image file of the disc  
temporarily on the computer hard disk drive.  
Use these steps to copy a CD or DVD using one disc drive:  
1 Insert the disc that you want to copy into the disc-burning drive.  
NOTE: If a CD-playing program opens automatically, close it before going to step 2.  
2 Click the Windows Start Button  
click CyberLink DVD Suite.  
on the taskbar, All Programs, and then  
3 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click Power2Go.  
4 Click the Copy Disc icon, and then click OK.  
5 Select the burn options, and then click the Copy button.  
Power2Go creates an image file of the disc. This file is temporarily stored on the  
computer hard disk drive.  
6 When you are prompted, insert a writable CD or DVD into the disc-burning drive, and  
then click OK.  
7 When the message Copy Disc: Completed successfully appears, click OK. The disc is  
ejected automatically.  
174 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Creating data discs  
This section provides instructions for burning data files onto a disc.  
To create a data disc:  
1 Insert a writable disc into the disc-burning drive.  
2 Click the Windows Start Button  
click CyberLink DVD Suite.  
on the taskbar, All Programs, and then  
3 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click Power2Go.  
4 Click the Data Disc icon.  
5 Select disc type, and then click OK.  
6 Locate files from the hard disk drive, and then click and drag them to the lower section  
of the window.  
7 When you are done adding files, click the Burn icon in the toolbar.  
NOTE: For more help using CyberLink Power2Go, click the Help icon in the  
program.  
8 Select the recording options.  
9 Click Burn to begin recording your music files to disc.  
10 Click OK when the data disc is completed.  
Making a disc label using LightScribe Technology  
(Select models only)  
The following section provides instructions for making a disc label by using LightScribe  
technology. For instructions on making a paper label, refer to “Making a paper disc  
label.”  
What is LightScribe?  
LightScribe is an innovative technology that uses a special disc drive, special media  
(CDs or DVDs), and label-making software to burn labels directly onto CDs and DVDs. A  
LightScribe-enabled CD or DVD disc drive uses the optical laser in the drive to burn a label  
onto a thin dye coating on the label side of the disc. There is no ink to smear or paper to  
curl, and there are no adhesives to loosen.  
Creating Audio and Data Discs 175  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
LightScribe requirements  
Burning a label with LightScribe requires three things:  
ꢀ
A LightScribe-enabled disc drive (select models only), identified by the  
LightScribe logo  
ꢀ
ꢀ
Labeling software that supports LightScribe  
A writable LightScribe disc (sold separately)  
Making a LightScribe label by using CyberLink LabelPrint  
You may burn data, music, and videos to the disc before or after labeling the disc. See  
“Creating audio CDs” and “Creating data discs.”  
To make a LightScribe label:  
1 Place the disc into the disc drive with the top of the disc facing down. The top is the  
gold non-reflective side of the disc, opposite of the side that you record data onto.  
2 Close the drive.  
3 Click the Windows Start Button  
click CyberLink DVD Suite.  
on the taskbar, All Programs, and then  
4 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click LabelPrint.  
5 Under Step 1: Select the type of label you want to print, select one of  
following:  
ꢀ Disc Label (LightScribe label)  
Or  
ꢀ MiniDisc Label (LightScribe label)  
6 Click the arrow button at the bottom of the window to continue.  
7 Under Step 2: Edit titles and other information, design the disc  
label:  
a Type in a disc title, author, and date.  
b Type in song titles, artist/author and time/size of the files.  
c
You can click the Import icon to import MP3 information, if desired.  
8 Click the arrow button at the bottom of the window to continue.  
176 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
9 Under Step 3: Select the label’s layout and background:  
a Select a layout style by clicking the arrows under Layout Style to scroll through the  
different label layouts available, and then click the Select button when you find  
the one that you want.  
b Select a background image by clicking the arrows under Background Image to  
scroll through the different background images that are available, and then click  
the Select button when you find the one that you want.  
c
If you are creating a paper label, select a paper size under Paper Template by  
using the drop-down arrow.  
10 Click the arrow button at the bottom of the window to continue.  
11 When you are ready to create the LightScribe label, click the Print icon.  
12 Click OK to create the LightScribe label. The estimated time to complete  
the label displays, along with a progress bar. It is possible to continue to  
work on the computer while the LightScribe label is created.  
For more help using CyberLink LabelPrint, click the Help icon to open the Help  
information.  
Making a paper disc label  
The following section provides instructions for creating a paper label for the disc. To create  
a LightScribe label, refer to “Making a disc label using LightScribe Technology.”  
1 Load the printer with adhesive label paper. You can purchase label paper at most  
office-supply stores.  
2 Click the Windows Start Button  
click CyberLink DVD Suite.  
on the taskbar, All Programs, and then  
3 Click the icon in the lower-right corner of the window to open a list of CyberLink  
programs, and then click LabelPrint.  
4 Under Step 1: Select the type of label you want to print, select one of  
following:  
ꢀ Front Cover (paper insert label)  
ꢀ Back of Front Cover (paper insert label)  
ꢀ Disc Inlay (paper insert label)  
5 Click the arrow button at the bottom of the window to continue.  
6 Under Step 2: Edit titles and other information, design the disc  
label:  
a Type in a disc title, author, and date.  
b Type in song titles, artist/author, and time/size of the files.  
c
Click the Import icon to import MP3 information.  
Creating Audio and Data Discs 177  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
7 Click the arrow button at the bottom of the window to continue.  
8 Under Step 3: Select the label’s layout and background:  
a Select a layout style by clicking the arrows under Layout Style to scroll through the  
different label layouts available, and then click the Select button when you find  
the one that you want.  
b Select a background image by clicking the arrows under Background Image to  
scroll through the different background images that are available, and then click  
the Select button when you find the one that you want.  
c
If you are creating a paper label, select a paper size under Paper Template by  
using the drop-down arrow.  
9 Click the arrow button at the bottom of the window to continue.  
10 When you are ready to create the LightScribe label, click the Print icon.  
For more help using CyberLink LabelPrint, click the Help icon to open the  
Help information.  
178 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Working with Pictures and Videos  
You can view, copy, edit, print, and share digital images and videos by using the  
computer.  
You can transfer digital images and videos to the computer by using the following  
methods:  
ꢀ
ꢀ
CD or DVD: Insert the disc into the CD or DVD drive.  
Digital camera or digital video camera: Connect the device to the computer by using  
the transfer cable that came with the device. (Select models have a digital camera  
docking bay.)  
ꢀ
Memory card: Insert the memory card into the memory card reader (select  
models only).  
Digital images that you copy or transfer to the computer may appear in the Pictures folder  
by default.  
Working with Digital Images  
You can connect a digital image source, such as a digital photo or video camera, directly  
to the computer or through a docking station. Most digital picture files that you copy or  
download from the device appear in the Pictures folder.  
NOTE: When transferring pictures from a digital photo camera to the computer, set the  
camera’s USB setting to disk drive instead of digital camera.  
Windows Vista detects the external device and opens a message, asking if you want to  
view the images.  
You can copy digital picture files from the memory cards that are used by digital cameras  
and other digital imaging devices by using the memory card reader (select models only).  
Working with Pictures and Videos 179  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Viewing Pictures in Windows Media Center  
With Windows Media Center, you can view, sort, edit, print, and create a CD or DVD of  
the pictures from the folders that you create in the Pictures directory in Windows Explorer.  
Pictures is a folder on the hard disk drive in the Documents window, and it is also a  
Windows Media Center menu item that enables you to view and search for the digital  
images by using the remote control or the keyboard and mouse.  
The Pictures + Videos menu in Windows Media Center provides all the tools that you need  
for viewing, organizing, editing, printing, sharing, and protecting the digital images.  
.
Adding Pictures in Windows Media Center  
Adding picture files from the hard disk drive  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Pictures + Videos.  
3 Click picture library.  
4 Press Ctrl+D on the keyboard or the i (More information) button on the remote  
control, and then click Library Setup.  
5 Click Add folder to watch, and then click Next.  
6 Click Add folders on this computer, and then click Next.  
7 Place a check mark next to the folders that you want Windows Media Center to check,  
and then click Next.  
8 Click Finish.  
180 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Viewing Pictures in Windows Media Center  
After you organize your pictures in the Pictures folder in Windows Explorer, open  
Windows Media Center to view them:  
1 Click the Windows Start Button  
Windows Media Center.  
on the taskbar, and then click  
2 Click Pictures + Videos and then click picture library.  
3 Select a folder, tags, or date taken. The window shows a small picture image  
(thumbnail) of each photo.  
ꢀ
Select date taken to view each photo with the date it was taken.  
ꢀ
Select folders if you have organized your pictures into folders. Each folder icon  
displays a thumbnail of photos. The pictures are displayed just as you organized  
them in the Pictures folder in Windows Explorer.  
4 Use the arrow keys on the keyboard to move through the picture files and folder files,  
and select a picture.  
5 Press the Enter key on the keyboard to select a picture or folder to view. The selected  
picture opens in full-screen mode.  
6 Press the Enter key on the keyboard again to zoom to 150 percent; press it again to  
zoom to 225 percent. Use the remote control arrow buttons to pan across a picture.  
Press Enter or OK a third time to return the picture to its original size.  
NOTE: While viewing a picture, you can press the i (More information) button on the  
remote control or Ctrl+D on the keyboard, click Picture Details, click Settings, and  
then click Pictures to:  
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
Select a slide transition, a slide time delay, and a background color.  
Include picture folders you have created.  
Show captions.  
Display pictures randomly.  
Show song information during a slide show.  
Working with Pictures and Videos 181  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Viewing pictures as a slide show  
1 Click the Windows Start Button  
Windows Media Center.  
on the taskbar, and then click  
2 Click Pictures + Videos, and then click picture library.  
3 Select the folder of pictures that you want to view as a slide show, and then press  
Enter on the keyboard.  
4 Click play slide show, and then press Enter on the keyboard.  
5 Press Ctrl+D on the keyboard or the i (More information) button on the remote  
control, and then click Picture Details. The picture name, location, and last  
modification date are displayed, if they are available.  
6 Press the Backspace key on the keyboard or the Back button on the remote control to  
go to a previous screen.  
7 Use the arrow keys on the keyboard or the arrow buttons on the remote control to  
display the next or previous pictures.  
If you do not select the pictures that you want to view as a slide show, Windows Media  
Center uses the first folder that is listed. If you have picture files that are not stored in  
folders that you created, Windows Media Center plays all of the files that are stored in the  
Pictures folder.  
Viewing a slide show with music  
1 Click the Windows Start Button  
Windows Media Center.  
on the taskbar, and then click  
2 Click Music, and then click music library.  
3 Select the music that you want, and then press Enter on the keyboard.  
NOTE: If the music does not start automatically, move the mouse to display the media  
control menu bar, and then click the Play button, or press the Play button on the  
remote control.  
4 Press the Backspace key on the keyboard until you are back at the Windows Media  
Center Start menu.  
5 Click Pictures + Videos, and then click picture library.  
6 Select the folder of pictures that you want to view as a slide show, and then press  
Enter on the keyboard.  
7 Click play slide show, and then press the Enter key on the keyboard. When  
Windows Media Center switches to full-screen mode, the inset window disappears,  
but the music continues to play.  
182 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Using supported picture file types in Windows  
Media Center  
You can view the following types of image files in Windows Media Center.  
File extension  
.jpg, .jpeg  
.tif, .tiff  
.gif  
File type  
Joint Photographic Experts Group  
Tagged Image File Format  
Graphics Interchange Format  
Bitmap  
.bmp  
.wmf  
Windows MetaFile  
.png  
Portable Network Graphics  
ꢀ
Only supported image file types display in the Pictures + Videos area of Windows  
Media Center. Unsupported files are skipped in a slide show.  
NOTE: If the message Image cannot be displayed appears, the file may be corrupted,  
or it may be an unsupported file type. You may need to edit the image with a photo  
editor and save it in a supported file format.  
ꢀ
ꢀ
Folder icons appear even if the images inside them cannot be displayed.  
Corrupted and unsupported image file types display a generic image icon, but they  
cannot be displayed.  
ꢀ
Some file types are supported only if appropriate filters and software are installed.  
Working with Pictures and Videos 183  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Editing Pictures in Windows Media Center  
Fixing red eye or contrast  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Pictures + Videos, and then click picture library.  
3 Select a picture to edit.  
4 Press the i (More information) button on the remote control or Ctrl+D on the  
keyboard, and then select Picture Details.  
5 Click Touch Up.  
6 Click Contrast or Red Eye.  
7 Click Preview to see the result.  
8 After you select the options that you want to fix, click Save. The picture displays with  
the new settings.  
9 Click Yes to save changes and replace the original picture file.  
Cropping pictures in Windows Media Center  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Pictures + Videos, and then click picture library.  
3 Select a picture to edit.  
184 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
4 Press the i (More information) button on the remote control or Ctrl+D on the  
keyboard, and then select Picture Details.  
5 Click Touch Up.  
6 Click Crop.  
7 Use the mouse and keyboard to do one or more of the following:  
ꢀ
Select the arrows under the picture to move the picture side to side, or up  
or down.  
ꢀ
ꢀ
Select the magnifying glass tools to move the cropping tool in or out.  
Select the rotate tool to move the cropping tool to a vertical or horizontal position.  
8 After you select the settings that you want to fix, click Save. Once you save the  
picture, you cannot revert to the original picture.  
9 Click Yes to save changes and replace the original picture file.  
Rotating pictures  
If the picture appears horizontally or vertically, and you want to change the orientation,  
you can change it in Windows Media Center:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Pictures + Videos.  
3 Select the picture you want to rotate.  
4 Press the i (More information) button on the remote control or Ctrl+D on the keyboard,  
and then select Picture Details.  
5 Click Rotate. Rotation occurs clockwise in 90° increments.  
Working with Pictures and Videos 185  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Printing Pictures in Windows Media Center  
NOTE: You must set up the printer before you try to print from Windows Media Center;  
otherwise, by default, the file is saved to the Documents folder when you try to print the  
picture.  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Pictures + Videos, and then click picture library.  
3 Select the picture that you want to print.  
4 Press Ctrl+D on the keyboard or the i (More information) button on the remote  
control, and then click Picture Details. Click Print, and then click Print again.  
5 Follow any onscreen instructions.  
Copying Pictures to CDs and DVDs in  
Windows Media Center  
NOTE: In Windows Media Center, all pictures are copied to CDs as .jpg files.  
1 Click the Windows Start Button  
Media Center.  
on the taskbar and then click Windows  
2 From the Tasks menu, click burn cd/dvd.  
3 Insert writable media (CD-R, CD-RW, DVD+/-R, or DVD+/-RW) into the drive.  
4 Click Data CD/DVD, and then click Next.  
NOTE: If you are using a writable disc that contains data, you must select Erase  
Disc to continue.  
5 Select the Untitled area, enter the name of the disc by using the numeric keys on the  
keyboard or the remote control, and then select Next. Use the Backspace key on the  
keyboard or the Clear button on the remote control to delete letters.  
6 Click Picture Library, and then click Next.  
7 Select the pictures that you want to copy, and then click Next. A check mark appears  
next to a picture when you select it.  
8 Click Add More to add more pictures to the disc.  
9 After you have selected all of your pictures, select Burn CD.  
10 Click Yes. Windows Media Center opens a message if you need to insert an  
additional disc to complete the recording. Windows Media Center opens a message  
when the disc has been created.  
11 Click Done when the disc has been created.  
186 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Playing Videos in Windows Media Center  
The Pictures + Videos area in Windows Media Center makes it easy to play home video  
files that you created or video files that you downloaded from the Internet.  
In Pictures + Videos you can:  
ꢀ
ꢀ
ꢀ
Play videos that are stored anywhere on the hard disk drive.  
Create a CD or DVD of your video files.  
View your videos in full-screen mode or from an inset window in Windows Media  
Center.  
ꢀ
View small thumbnail images and the titles of your video files.  
Playing digital videos  
After you organize the videos in the Videos folder or Shared Video folder in Windows  
Explorer, open Windows Media Center to watch them:  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 Click Pictures + Videos.  
3 Click video library.  
4 Select the video folder that you want. The video folder opens, displaying a list of  
video files. You may need to use the scroll arrows at the bottom of the window to  
display all videos.  
NOTE: Use the mouse to select the up arrows and down arrows at the bottom of the  
window, to scroll to other pages of video files and folders.  
5 Click the video file. The video plays in full-screen mode. Use the mouse to resize the  
window if you want to watch the video while doing something else on the desktop.  
6 To exit full-screen mode and return to the previous window, press the Back button on  
the remote control or the Backspace key on the keyboard. The video continues to play  
in the inset window.  
7 When the video is finished, click Restart to replay the video, or click Done to close  
the file and return to the Videos area.  
NOTE: You can maximize the media that is playing in the inset window by using the  
arrow buttons to select the inset window and then pressing OK on the remote control or  
Enter on the keyboard, or you can just click the inset window.  
Working with Pictures and Videos 187  
Download from Www.Somanuals.com. All Manuals Search And Download.  
           
Using supported video file types  
You can view the following types of video files in Windows Media Center. Other file types  
are supported if the computer has the correct software installed:  
File extension  
.avi  
File type  
Windows Video file (Audio Video Interleaved)  
Digital Video Recording—Microsoft (TV file format)  
.dvr-ms  
.mpeg, .mpg, .mpe, Movie file  
.m1v, .mp2, .mpv2  
.wm, .asf  
.wmv  
Windows Media file  
Windows Media Video file  
NOTE: For more information about supported video file types, refer to Help and Support.  
Click the Windows Start Button  
Support.  
on the taskbar, and then click Help and  
Transferring and Recording Video Files  
Once you capture the video by using video capture and editing software, you can use  
Windows Media Center to find it and add it to the Videos area.  
Recording analog and digital video files  
Refer to Help and Support for more information about capturing and recording video files  
from analog and digital video cameras.  
To find information in Help and Support:  
1 Click the Windows Start Button  
Support.  
on the taskbar, and then click Help and  
2 Type in search words such as recording video.  
188 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Creating a DVD from Video Files in  
Windows Media Center  
1 Click the Windows Start Button  
Media Center.  
on the taskbar, and then click Windows  
2 From the Tasks menu, click burn cd/dvd.  
3 Insert writable media (CD-R, CD-RW, DVD+/-R, or DVD+/-RW) into the drive.  
4 Select Video DVD, and then click Next.  
NOTE: If you are using a rewritable disc that contains data, you must select  
Erase Disc to continue.  
5 Select the Untitled area, enter the name of the disc by using the numeric keys on the  
keyboard or the remote control, and then click Next. Use the Backspace key on the  
keyboard or the Clear button on the remote control to delete letters.  
6 Click Video Library, and then click Next.  
7 Select the files you want to copy, and then click Next. A check mark appears next to  
a file when you select it.  
8 Click Add More to add more files to the disc.  
9 After you have selected all of the files, click Burn DVD.  
10 Click Yes. Windows Media Center opens a message if you need to insert an  
additional disc to complete the recording. Windows Media Center opens a message  
when the disc has been created.  
11 Click Done when the disc has been created.  
Working with Pictures and Videos 189  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
190 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating Movies by Using  
muvee autoProducer  
(Select models only)  
Creating personalized and professional-looking video movies is simple with  
muvee autoProducer, a software program that is installed on the computer. The  
6.0 version of muvee autoProducer includes features such as video capture  
and disc recording.  
Basic steps for making a movie  
The basic steps for producing a movie with muvee autoProducer are the following:  
1 Capture digital video: Capture live or recorded video to the hard disk drive  
directly from a compatible digital video (DV) camera.  
2 Add videos and pictures: Select video and still-image (picture) files from the  
computer folders. You can easily add videos and still images to the movie project.  
You can use the following video and picture file types in the movie project:  
File  
extension  
.dv-avi  
.avi  
File type  
Digital Video  
Audio Video Interleaved  
Motion Picture Experts Group video playback  
MPEG for DVD video playback  
.mpeg-1  
.mpeg-2  
.MP4  
MPEG for high-quality video format (Web streaming, wireless  
devices, and so on)  
.mov  
QuickTime Movie  
.wmv  
.asf  
Windows Media AV file (movie video)  
Windows Media file (Advanced Streaming Format)  
Joint Photographic Experts Group, still image  
Graphics Interchange Format, still image  
.jpg, .jpeg  
.gif  
Creating Movies by Using muvee autoProducer 191  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
File  
extension  
File type (continued)  
.png  
.tif  
Portable Network Graphics, still image  
Tagged Image File Format, still image  
Bitmap, still image  
.bmp  
NOTE: If you upgrade muvee autoProducer, you can use the DivX video format. See  
“Upgrading muvee autoProducer.”  
3 Add music: Select music files on the computer to add to the movie soundtrack.  
You can use the following music file types in the movie project:  
File extension  
.aac  
File type  
Advanced Audio Coding  
MPEG Layer 3  
.mp3  
.m4a  
MPEG-4 Audio layer (unprotected AAC)  
Windows Audio  
.wav  
.wma  
Windows Media Audio  
4 Select a style: Apply a movie style editing template for different effects and picture  
transitions in the movie.  
5 Add captions: Personalize the movie with an opening title and closing credits.  
6 Make the movie: Automatically analyze the videos, pictures, music, movie style,  
and captions that you added to the project, and save the project to the computer hard  
disk drive before recording it to disc.  
7 Modify the movie: Make final changes to the movie before you save it.  
8 Burn to disc: You can record the movie to DVD, VCD, or SVCD.  
The following sections provide detailed instructions for each of these steps.  
192 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Using muvee autoProducer  
Getting started  
To open muvee autoProducer (select models only):  
1 Click the Windows Start Button on the taskbar.  
2 Click All Programs, muvee autoProducer, Home movies made easy!, and  
then click Launch muvee autoProducer 6 to open muvee autoProducer.  
3 On the File menu, select either New Project to start a new project or Open Project  
to open an existing project.  
NOTE: By default, muvee autoProducer opens ready to start a new project.  
Creating Movies by Using muvee autoProducer 193  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
4 Select one of the following buttons:  
Button  
Enables you to:  
See  
Get Video from  
Camera  
Open the muvee Video Capture window to  
capture (copy) live or recorded video.  
“Capturing video from a  
digital video camera.”  
Add Video  
Add Pictures  
Add Music  
Personalize  
Title/Credits  
Open the Add Video window to add existing  
video files to the project.  
“Adding videos.”  
Open the Add Pictures window to add existing “Adding pictures.”  
still-image files to the project.  
Open the Add Music window to add existing  
music files to the project.  
“Adding music.”  
Open the muvee Personalize Settings window  
to adjust audio and video production settings  
for the movie.  
“Changing the settings.”  
“Changing the settings.”  
Open the muvee Title and Credits window to  
enter an opening title and closing credits to the  
movie.  
NOTE: You must open the Personalize window  
to access the Title/Credits button.  
Make muvee  
Open the Make muvee window to create and  
preview the movie automatically.  
“Making the movie.”  
Save and share  
your muvee  
Open the Listed muvee Files window to save  
the finished movie to the computer hard disk  
drive, or to record the finished movie to a disc.  
“Saving the movie project.”  
“Recording the movie project  
to disc.”  
Tweak muvee  
Make quick final changes to the movie before  
saving it.  
“Modifying the movie.”  
194 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
Capturing video from a digital video camera  
You can use muvee autoProducer to capture (copy) digital video files to the hard disk drive  
in either of the following ways:  
ꢀ Live (known as camera mode), by using a compatible digital video (DV) camera. See  
“Capturing live video from a DV camera.”  
ꢀ Recorded (known as VCR mode), by using a recorded tape in the DV camera. See  
“Capturing recorded video from a DV camera.”  
Captured video files are automatically added to the movie project. To remove a file  
from the movie project, select it in the list of captured video files, and then click the  
trash can icon.  
When capturing video, it is important to be aware of the amount of available free space  
on the computer hard disk drive. Capturing video can use a large amount of disk space.  
The amount of free disk space displays in the Capture Video window while you are  
capturing video.  
Capturing live video from a DV camera  
Capturing live video in camera mode enables you to create a video file without even  
having a tape in the camera.  
To capture live video to the hard disk drive by using muvee autoProducer:  
1 Connect the DV camera to the FireWire (IEEE 1394) port on the computer.  
2 Turn on the camera, and set it to VCR mode. Refer to the instructions in the  
manufacturer’s documentation.  
3 Click the Import video/pictures from a device button.  
4 Select From My Camcorder.  
5 Browse to the camera, and then click Open. Your video appears in the  
Video/Pictures area.  
6 Click Import Now to start capturing the live image directly to the hard disk drive.  
7 Click Filename to specify a file name for the captured video file.  
8 Click Done to add a captured video file automatically to the movie project.  
Capturing pictures from a DV camera  
To transfer pictures to the hard disk drive by using muvee autoProducer:  
1 Connect the DV camera to the FireWire (IEEE 1394) port on the computer.  
2 Turn on the camera. Refer to the instructions in the manufacturer’s documentation.  
3 Click the Import video/pictures from a device button.  
4 Select From My Camera/Device.  
5 Under Import my pictures/video, select the camera in the drop-down list.  
6 Click Media Screen.  
Creating Movies by Using muvee autoProducer 195  
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
7 Click Browse to select a place to save the files, and then click OK.  
8 Click Filename to specify a file name for the captured video file.  
9 Click Done to add the captured video file automatically to the movie project.  
Capturing recorded video from a DV camera  
For best results when using muvee autoProducer, capture only video footage that you are  
most interested in using in the movie project.  
To capture recorded video to the hard disk drive:  
1 Connect the DV camera to the FireWire (IEEE 1394) port on the computer.  
2 Turn on the camera, and set it to VCR mode. Refer to the instructions in the  
manufacturer’s documentation.  
3 Click the Import Video/Pictures from a device button.  
4 Select From My Camcorder.  
5 Click the Play button to start viewing the video.  
6 Click Start Capture when you see the start of the video footage that you want to use  
in the movie project.  
7 Click Stop Capture to stop capturing.  
8 Repeat steps 5 and 6 to capture additional sections of video footage.  
9 Click Capture Folder to specify a folder for the captured video file.  
10 Click Filename to specify a file name for the captured video file.  
11 Click Done to automatically add the captured video files to the movie project.  
Adding videos  
To add video files to the movie project:  
1 Click the Add video button in the Video/Pictures area. The Add Video  
window opens.  
2 Browse the folders on the hard disk drive to select existing video files for the  
movie:  
ꢀ
Add up to three video files.  
ꢀ
Select multiple video files by pressing and holding the Ctrl key on the keyboard  
while you select the files.  
196 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
3 Adjust the order of the video files by dragging and dropping the files.  
NOTE: To remove a clip from the project, select it, and then click the trash can icon.  
4 You can use the magicMoments feature in muvee autoProducer to mark specific scenes  
in a video clip that you want to include in, or leave out of, the final movie:  
a Select a video file in the Select Video/Pictures window, and then click the  
magicMoments button. The magicMoments window opens.  
b Click the Play button to start viewing the video.  
c
Use the magicMoments controls to mark the video scenes to include and exclude:  
ꢁ
ꢁ
Click and hold down the green thumbs-up button to mark scenes that must  
be included in the movie.  
Click and hold down the red thumbs-down button to mark scenes that  
must be left out of the movie.  
NOTE: Press the Shift key on the keyboard, and then click the scene to undo  
scenes that were marked with the thumbs-up or thumbs-down buttons.  
ꢁ
ꢁ
Click and hold down the gray thumb button to unmark one second of a  
selected scene.  
Click and hold down the arrow buttons to navigate backward and forward  
through the video footage.  
Video footage left unmarked is still analyzed when you make the movie, and you  
can decide at that time whether to include it in the final version of the movie.  
For best results when using the magicMoments feature:  
ꢁ
Keep each magicMoment to less than 10 seconds.  
ꢁ
Keep the total duration of magicMoments to less than 50 percent of the  
duration of the movie. It is recommended that you select only a few scenes.  
d When you are done marking scenes, click OK. The window closes. Note that the  
video clip is marked on the lower-left side.  
Creating Movies by Using muvee autoProducer 197  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Adding pictures  
To add still-image picture files to the movie project:  
1 Click the Add pictures button in the Video/Pictures area. The Add Pictures  
window opens.  
2 Browse the folders on the hard disk drive to select existing still-image files for  
the movie:  
ꢀ
Add up to 50 picture files.  
ꢀ
Select multiple picture files by pressing and holding the Ctrl key on the keyboard  
while you select the files.  
ꢀ
Click Open to add pictures to the Video/Pictures area.  
3 Adjust the order of the picture files by dragging and dropping them.  
NOTE: To remove a picture from the project, select it, and then click the  
trash can icon.  
4 Click the Rotate Image Clockwise button to rotate a picture.  
5 You can use the magicSpot feature in muvee autoProducer to control the pan  
and zoom motion that is applied to the picture:  
a Click the magicSpot button to open the magicSpot window.  
b Click the Manual button to display two overlapping frames over the  
picture.  
c
Move the frames around to set the start and end points for motion. The arrow in  
the frames shows the direction of motion.  
d When you are done, click OK.  
198 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Adding music  
To add music files to the movie project as a soundtrack:  
1 Click the Add music button in the Music area. The Add Music window  
opens.  
2 Browse the folders on the hard disk drive to select existing music files for the  
movie:  
ꢀ
Add up to three music files.  
ꢀ
Select multiple music files by pressing and holding the Ctrl key on the keyboard  
while selecting the files.  
ꢀ
Click Open to add the music files to the Music area.  
3 Adjust the order of the music files by dragging and dropping the files.  
NOTE: To remove music from the project, select it, and then click the  
trash can icon.  
Selecting the style  
The muvee autoProducer program comes with a set of style templates for setting the pace,  
scene-transition effects, and caption fonts. The style that you use also affects how  
muvee autoProducer combines the video, picture, and music files in the movie project to  
produce the final movie.  
For example, using the Back-in-Time style results in a movie that is in a scratchy sepia to  
black-and-white format.  
To select a style, just click it in the list. A sample of the style is displayed in the Select Style  
window.  
Creating Movies by Using muvee autoProducer 199  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
Changing the settings  
IMPORTANT: Each time that you make a change to a movie project, you must click the  
make muvee button again to add that change to the movie.  
To adjust the audio and video project settings for the movie:  
1 Click the Personalize button. The Personalize window opens.  
2 Click the Duration tab to set preferences for the length of the video production. Click  
one of the following settings:  
ꢀ Fit to music: The produced version may reuse or drop some video and pictures.  
This option automatically selects material from the video and pictures to fit the total  
duration of the music track(s).  
ꢀ Best fit for videos and pictures: The produced version may repeat or trim  
music. This option uses as much of the material as possible.  
ꢀ User defined: Use this option to select the duration for each picture (2, 3, 4, 5,  
or 6 seconds).  
3 Click the Video/Pictures tab to set preferences for the video and still images  
(pictures). Click one of the following settings:  
ꢀ Style default: Select this style to sequence still images and video clips.  
ꢀ Keep shots in sequence: Select this style to use the sequence of still images  
and video clips as they appear in the Add Video/Pictures area.  
ꢀ Shuffle settings: Select this style to determine the frequency of sequencing still  
images and video clips by moving the slider.  
ꢁ
Place a check in the Interleave pictures check box to blend still images  
with video clips at intervals.  
ꢁ
Place a check in the Use every picture once check box to prevent pictures  
from being dropped.  
4 Click the Audio tab to set the sound preferences. Click one of the following settings:  
ꢀ Use every music track: Select this style to use the sequence of sound files in  
the Add Music window.  
ꢀ Seamlessly transition between multiple music tracks: Select this style to  
automatically remove silence between music tracks.  
ꢀ Sound check: Select this style to automatically adjust audio playback volume to  
the same level.  
5 Click the Superstyle tab to customize the style that you selected in the main  
muvee autoProducer window. You can select the following settings:  
ꢀ Response to music  
ꢀ Cutting rate  
ꢀ Film color  
200 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
6 Click the Title tab to type in the movie title.  
ꢀ
Select the animation style of the title.  
ꢀ
Choose the background color or image style. Click the Use image button to  
browse for an image that you want to use with the title.  
ꢀ
Type in the title. Select Use Font, and then click the Use Font button to open the  
Font window. Select a font, and then click OK.  
7 Click the Credits tab to type in the movie credits.  
ꢀ
Select the animation style of the credits.  
ꢀ
Choose the background color or image style. Click the Use image button to  
browse for an image that you want to use with the credits.  
ꢀ
Type in the credits. Select Use Font, and then click the Use Font button to open  
the Font window. Select the font, and then click OK.  
8 When you are done adjusting the settings for the movie project, click OK.  
Or  
Click Cancel to undo any settings.  
Making the movie  
After you have added at least one video or picture file to the movie project, you can have  
muvee autoProducer make the movie.  
The muvee autoProducer program makes a movie by combining the video, picture, and  
music files that you have selected, along with the style of movie, to produce a  
professional-looking movie in just a few steps.  
1 Click the make muvee button.  
2 Click OK, as required.  
3 After making a movie, you can preview it in the muvee autoProducer Preview window.  
Use the controls in the Preview window to play, pause, and stop the movie preview.  
You can revise and preview the movie as often as you want, to experiment with  
different styles and with the content of the movie.  
IMPORTANT: Each time that you make a change to a movie project, you must click  
the make muvee button again to add that change to the movie.  
Creating Movies by Using muvee autoProducer 201  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
Previewing the movie  
After you have made the movie, you can preview how it looks and sounds, and take  
snapshots of frames in the movie.  
1 Click the Start Playback button. The movie starts playing.  
2 Use the Stop and Previous Frame/Next Frame buttons to navigate  
through the movie.  
3 Click the Take a Snapshot button to save the current frame as a picture file  
(.jpeg, .bmp, or .gif format).  
4 Click the Go to the source of the segment button to open the magicSpot  
window. For more information about using magicMoments, see “Adding  
videos.”  
5 Click the Full-screen preview button to view the movie in the  
full-screen mode.  
6 Click the Audio mix button to adjust sound levels for the movie.  
Modifying the movie  
After you have created the movie, muvee autoProducer enables you to make some quick  
final changes to the project before you save it. You can also have muvee autoProducer  
replace pictures or videos with other similar or contrasting ones. Alternatively, you can  
manually choose the replacement shots.  
To modify a movie:  
1 Click the tweak muvee button. The Tweak muvee window opens.  
2 Click the Start Playback button. The movie starts playing.  
3 Click the Pause Playback button to stop the movie at any time.  
4 You can also click on the seek bar or drag the slider to move to a particular  
point in the movie.  
202 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
5 Use the controls in the Tweak muvee window to modify the movie project:  
NOTE: In the Tweak muvee window, you can replace a video segment only with  
another video segment from the original footage; likewise you can replace pictures  
only with other pictures. You cannot expand the duration of the selected clip or the  
replacement clip.  
ꢀ
ꢀ
ꢀ
ꢀ
Click the Auto-replace with similar button to automatically  
replace a picture or video segment with another similar picture or  
video segment.  
Click the Auto-replace with different button to automatically  
replace a picture or video segment with a completely different  
picture or video segment.  
Click the Manually replace the selected segment button to  
replace a picture or video segment with a picture or video  
segment of your choice.  
Click the Start recording voiceover button to record your  
voice-over content. When you are finished recording, click the  
Stop recording voiceover button.  
ꢀ
ꢀ
You can click the Remove voiceover button to delete voice from  
a segment of the movie.  
Click the Undo or Redo button as needed.  
6 When you are done modifying the movie project, click OK to save the changes  
and close the Tweak muvee window.  
Or  
To close the Tweak muvee window without saving the changes, click Cancel.  
7 Click the make muvee button to save the changes to the movie.  
Creating Movies by Using muvee autoProducer 203  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Saving the movie project  
After you are satisfied with the look of the movie project, you are ready to save the movie  
as a file on the hard disk drive:  
1 Click the muveeShare button. The Listed muvee Files window opens,  
with all the muvee files listed.  
2 Remove the check mark next to any muvee files that you do not want  
to save.  
3 Edit the muvee files before you save them:  
ꢀ
ꢀ
Click the Rename button to change the name of the selected muvee file.  
Click the Move up or Move down button to change the  
order of the selected muvee file in the list.  
ꢀ
ꢀ
Click the Select all or Deselect all button to save all  
muvee files or to save none of them, respectively.  
Click the trash can icon to delete the selected file.  
4 The TV System area shows the current TV format (NTSC or PAL). To change the format,  
click the name of the current format, and then select the correct format in the window  
that opens.  
5 Click Save Now. The muveeShare window opens.  
6 Choose where you want to save the movie (disc, e-mail, Web streaming, PC, or  
Mobile Device) by clicking one of the icons at the top of the window, and then  
select the settings.  
7 When you are done, click Close.  
Or  
Click Open output to see where the files are saved.  
Or  
Click Play muvees.  
8 When you are done, click Close.  
204 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Recording the movie project to disc  
To create a DVD, VCD, or SVCD disc of the movie project:  
1 Click the muveeShare button. The Listed muvee files window opens with  
all the muvee files listed.  
2 Remove the check mark next to any muvee files that you do not want  
to save.  
3 Edit the muvee files before you save them:  
ꢀ
ꢀ
Click the Rename button to change the name of the selected muvee file.  
Click the Move up or Move down button to change the  
order of the selected muvee file in the list.  
ꢀ
ꢀ
Click the Select all or Deselect all button to save all  
muvee files or to save none of the muvee files, respectively.  
Click the trash can icon to delete the selected file.  
4 Click the disc icon to create copies of all of the picture and video files that are  
used to create the muvee file.  
5 The TV System area shows the current TV format (NTSC or PAL). To change the  
format, click the name of the current format, and then select the correct format in the  
window that opens.  
6 Under Disc title, type a title for the disc.  
7 Select the disc menu theme in the drop-down list. You can preview the different themes  
in the window.  
8 Select the CD or DVD burner drive in the drop-down list.  
9 Click Burn Now.  
10 Select the type of video disc that you want to create: DVD, VCD, or SVCD. The  
window shows the disc capacity, the disc capacity used, and available disc space.  
11 If you want to create more than one disc of the same muvee file:  
a Click a number next to Number of copies, and then click OK.  
b Select the number of copies to record, and then click OK.  
12 Insert a disc into the DVD recording drive.  
13 Click Burn Now to start recording the movie to disc.  
NOTE: For best disc quality, it is recommended that you not perform other computer  
tasks while the movie is being recorded to disc.  
Or  
To save the current settings for future use, click Burn Later.  
14 When the recording is complete, click OK.  
15 Click Close.  
Creating Movies by Using muvee autoProducer 205  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Upgrading muvee autoProducer  
You can purchase an upgraded version of muvee autoProducer. The upgraded version  
enables you to use unlimited video clips, audio clips, and still images in the movie project.  
It also includes support for DivX file types, so that you can import or create DivX-format  
movies. (Purchasing DivX videos from DivX services may require a subscription.)  
To see muvee autoProducer offers for HP customers:  
1 At the top of the muvee autoProducer window, click Help.  
2 Click Check for updates. The program accesses the Internet and displays  
muvee autoProducer offers.  
Supported muvee autoProducer output file types  
The supported muvee autoProducer file types are the following:  
File extension  
.dv-avi  
File type  
Digital Video  
.avi  
Audio Video Interleaved  
.mpeg-1  
.mpeg-2  
.wmv  
Motion Picture Experts Group video playback  
MPEG for DVD video playback  
Windows Media AV file (movie video)  
206 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
Index  
A
C
adding  
cable modem, using 12, 47, 97  
card reader, memory 119  
carpal tunnel syndrome 48  
CDs  
CD tracks to the music library 136  
music files to the music library  
from the hard disk drive 135  
adjusting monitor 11  
erasing rewritable 170  
playing 141  
change the speed of the cursor 70  
CompactFlash media 121  
antivirus, installing program 55  
audio connector 5  
Audio Line Out 5  
troubleshooting memory card reader 124  
CompactFlash Type I 122  
CompactFlash Type II 122  
Composite video connector 4, 6  
computer  
retasking (multistreaming) 82  
audio input, left and right connectors 4  
autoscroll 69  
B
batteries  
installing in remote control 90  
type for remote control 90  
Bluetooth devices 14  
Blu-ray  
compatibility 115  
DVD 118  
using a Blu-ray drive 113, 116, 118  
burning  
front-panel connectors 2  
Help & Tools 40  
setting up 1  
transferring files 55  
turning off 44  
connecting  
devices 10  
digital camera 8  
digital video camera 8  
headphones 35  
audio and data disc 170–175  
buttons  
peripherals 2  
connection  
keyboard, customizing 62  
media control or playback 62  
Off, See turning off computer 44  
remote control 88  
modem 16  
wired network 13  
Index 207  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
connector  
Audio Line In 5  
discs  
drive compatibility 115  
erasing rewritable 170  
features and compatibility 116  
documentation, onscreen 39  
DV camera capture 195  
DVD movies  
Audio Line Out 5  
back panel 7  
Composite Video In 6  
computer 2  
FM In 6  
changing  
headphones 4  
audio settings 152  
language 150  
playing  
keyboard 4  
Microphone In 4  
modem 7  
in Windows Media Center 149  
DVD Play, features 103  
DVDs  
monitor 7  
mouse 4  
printer 5  
erasing rewritable 170  
High-Definition 117  
playing Blu-ray DVDs 147  
playing HD DVDs 147  
S-video In 5  
TV/Cable Ant 6  
USB 4, 5  
country/region codes 149  
Creative Sound Blaster X-Fi Sound Card  
audio modes 77  
configuring 76  
cursor speed 70  
customizing keyboard buttons 62  
CyberLink LabelPrint  
creating a LightScribe label 176  
features 104  
CyberLink Power2Go  
copying a disc 174  
erasing discs 170  
features 104  
CyberLink PowerDirector  
creating video disc 173  
E
erasing rewritable discs 170  
error messages  
Image cannot be displayed 183  
errors  
reducing recording speed 171  
Ethernet connection 13  
Ethernet network hub 5  
F
file type  
music 137, 192  
picture 183, 191, 192  
video 188, 191, 206  
FireWire 195, 196  
FM In connector 6  
D
desktop  
FM radio antenna  
switching from Windows Media Center 164  
devices  
connecting 10  
digital camera  
connecting 6  
Found New Hardware message, connecting a digital  
camera 9  
connecting 8, 10  
H
digital images 179  
headphones  
digital picture 119, 179  
digital video camera  
connecting to a computer 8  
recording videos 173, 195  
troubleshooting 9  
connector 4  
using 35  
Help and Support 40  
High-Definition 118  
disc drives 116  
home videos 173, 195  
digital video camera capture 195  
208 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HP Media Drive 125  
Microdrive disk drive 121  
microphone connector 4, 5  
Mini Secure Digital (MiniSD) 121  
mini-jack 18  
activity and power lights 127  
automatic on and off feature 126  
disconnecting the drive 130  
inserting a drive 127  
modem  
connection 16  
connector 7, 16  
monitor  
location and drive letter 129  
HP Photosmart Essential 103  
HP Pocket Media Drive 125  
HP Total Care Advisor 41  
adjusting 11  
monitor connector 7  
mouse  
I
autoscroll 69  
IBM Microdrive 122  
cursor speed 70  
Internet security 52, 100  
panning 69  
switching button functions 69  
mouse connector 4  
K
keyboard  
MultiMediaCard (MMC) 121  
MultiMediaCard Plus (MMC +) 121  
Music 133  
connector 4  
customizing buttons 62  
shortcuts 63  
types of buttons 57  
using 57  
deleting music from the Music library 137  
finding and playing an album 141  
playing a song 140  
supported file types 137  
music  
playing with Windows Media Player 147, 153  
music library  
adding CD tracks 136  
creating 135  
Mute button 62  
muvee autoProducer  
L
LAN (local area network) 12  
antenna 15  
checking wireless LAN device 15  
connecting Ethernet LAN 5  
connecting wireless LAN device 14  
setting up 13  
using Local Area Network 12  
LightScribe, creating a LightScribe disc label 175  
local area network (LAN) 12  
adding a title and credits 194  
adding music 194  
adding pictures 194, 198  
adding video 194, 196  
basic steps to create a movie 191  
changing settings 200  
copying a movie to disc 205  
features 104  
M
magicSpot 198  
manuals  
storing 10  
memory card reader 179  
card types 119  
getting started 193  
getting video from a camera 194  
making a movie 201  
previewing a movie 202  
rotating images clockwise 198  
selecting style 199  
in-use light 123  
troubleshooting 124  
using 119  
memory card, formatting 123  
Memory Stick (MS) 121  
Memory Stick (MS-Duo) 121  
Memory Stick (MS-Pro Duo) 121  
Memory Stick (MS-Pro) 121  
setting the duration of video 200  
upgrading 206  
using the magicMoments feature 197  
Index 209  
Download from Www.Somanuals.com. All Manuals Search And Download.  
remote control  
N
buttons 88  
range 90  
network interface adapter 5  
Network Interface Card (NIC) 13  
Norton Internet Security  
configuring 100  
type of battery to use 90  
using 90  
remote sensor 91  
registering 100  
using 90  
repetitive strain injury (RSI), see Safety & Comfort Guide  
rewritable discs, erasing 170  
O
Off button, See turning off computer 44  
optical drive quick reference 117  
Optimization setting 162, 167  
S
Safety & Comfort Guide 48  
safety warnings 48  
P
scanner, connecting 10  
scrolling with the mouse 68  
Secure Digital (SD) memory card 121  
setting up computer 1  
settings  
panning with the mouse 69  
peripherals 2  
pictures 179  
copying pictures to CD 186  
editing 184  
for sound 166  
general 166  
Internet connections 166  
remote control and remote sensor 91  
Shared Video folder 187  
shortcuts  
printing 184  
rotating 185  
turning captions on or off 181  
types of files it can display 183  
viewing 181  
viewing a slide show with music 182  
viewing pictures as a slide show 182  
playing  
keyboard 63  
shutting down computer 44  
sleep mode button 60  
slide show  
digital music files 138  
digital videos 187  
DVDs in Windows Media Center 149  
music CDs 146  
music CDs in Windows Media Center 138  
songs 142  
displaying information about pictures 182  
viewing pictures 182  
viewing with music 182  
software programs  
CyberLink LabelPrint 104, 176  
CyberLink Power2Go 104, 170  
CyberLink PowerDirector 104, 173  
DVD Play 103  
playlist  
creating in Music 143  
power connector 4  
PowerDirector, features 104  
printer  
Windows Movie Maker 105  
speaker systems 21  
speakers  
connecting 10  
connector 5  
connecting multichannel audio speakers to the  
computer 17, 19–35  
multichannel audio  
R
recording  
connecting 78  
resolving sound issues 86  
Start menu  
videos from digital video camera 173, 195  
with Realtek HD Audio Manager 81  
reduced size MultiMediaCard (RSMMC) 121  
Windows Media Center 163  
surge protector 1  
SVCD 205  
S-video In connector 3, 5  
switching mouse button functions 69  
210 Getting Started (features vary by model)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
T
W
transferring information to your new computer 55  
WEP 16  
troubleshooting  
remote sensor 91  
turning off computer 44  
Windows Media Center  
menu bars 164  
navigating 165  
opening with remote control 90  
playing DVDs 149  
U
playing videos 187  
update, Windows Vista 53  
updating, system 53  
USB connector 4, 5  
user accounts  
resizing window 164  
using with another program open 164  
viewing your pictures 181  
what you can do  
creating 49  
in Music 133  
Windows Media Player  
playing DVDs 153  
V
VCD 205  
playing with Windows Media Player 155  
video capture  
live 195  
recorded video 195  
video editing  
getting started with muvee autoProducer 193  
video movies  
transferring and recording 188  
videos 187  
creating a DVD 189  
playing 187  
playing digital videos 187  
transferring videos 188  
working with home videos 8  
visualization settings 139  
volume  
playing music CDs 147  
playing video CDs 155  
setting as default player 137  
types of files 137  
Windows Movie Maker, features 105  
Windows Vista update 53  
wired network connection 13  
wireless devices 14  
wireless LAN 14  
wireless LAN connection 14  
wireless local area network (WLAN) 14  
wireless network  
security 16  
wireless network device  
checking installation 15  
wireless wide area networks (WWAN) devices 14  
WLAN security 16  
controls 62  
working in comfort 48  
WPA 16  
X
xD media 122  
Y
Y adapter cables 28  
Index 211  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part number: 5992-2246  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco Network Card 24B591 User Manual
Grizzly Outboard Motor H5378 User Manual
Haier Washer HWM85 1482 User Manual
Hamilton Beach Mixer 840086200 User Manual
Harbor Freight Tools Drill 95094 User Manual
Hasbro Robotics 83529 User Manual
Heat Glo LifeStyle Indoor Fireplace RED60 2159 900 User Manual
Husqvarna Cultivator DRT900 User Manual
Husqvarna Lawn Mower 532 43 00 03 User Manual
IBM Garage Door Opener 38 User Manual