12” (30cm)
DVI
HDMI-DVI
HDMI
VGA-DVI
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
http://www.hp.com/go/contactHP
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright and License
The information in this document is subject to
change without notice.
© Copyright 2012 Hewlett-Packard Development
Company, L.P. The information contained herein
is subject to change without notice.
Warranty Print on Demand Statement
You can find the expressly provided HP Limited
Warranty applicable to your product in the start
menu on your PC and/or in the CD/DVD
provided in the box. For some countries/regions,
a printed HP Limited Warranty is provided in the
box. In countries/regions where the warranty is
not provided in printed format, you may request
a printed copy from hp.com/go/orderdocuments
or write to HP at: Hewlett-Packard, MS POD,
11311 Chinden Blvd., Boise, ID 83714, U.S.A.;
Hewlett Packard, POD, P.O. Box 200,
The only warranties for Hewlett-Packard products
and services are set forth in the express
statements accompanying such products and
services. Nothing herein should be construed as
constituting an additional warranty. HP shall not
be liable for technical or editorial errors or
omissions contained herein.
HP assumes no responsibility for the use or
reliability of its software on equipment that is not
furnished by HP.
Alexandra Post Office, Singapore 911507.
Please include your product name, warranty
period, name, and postal address.
This document contains proprietary information
that is protected by copyright. No part of this
document may be photocopied, reproduced, or
translated to another language without the prior
written consent of HP.
Hewlett-Packard Company
P.O. Box 4010
Cupertino, CA 95015-4010
USA
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Microsoft and Windows are trademarks of
Microsoft Corporation in the U.S. and other
countries.
HP supports lawful use of technology and does
not endorse or encourage the use of our products
for purposes other than those permitted by
copyright law.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Getting information
Type of information
Where to find
Set up your computer.
Quick Setup (this Guide)
Quick Setup (this Guide)
●
Use the computer.
●
●
Connect to the Internet.
Recover factory settings.
Troubleshooting and Maintenance Guide on your computer. At the bottom
of your screen, click on Start, then click HP Help and Support and HP
User Manuals.
●
the features of your computer.
●
Learn how to use the Microsoft Help and Support
●
●
Windows 7 operating system.
Click Start, and then click Help and Support or visit
Find Windows 7 password
information.
Windows 7 troubleshooting tools
Find links to driver updates.
●
●
1. Click Start, click Control Panel, and then click System and
Security.
Read frequently asked
questions.
2. Under Action Center, click Find and fix problems
(troubleshooting).
Troubleshoot the most common Troubleshooting and Maintenance Guide on your computer. At the bottom
●
computer hardware and
software issues.
of your screen, click on Start, then click HP Help and Support and HP
User Manuals.
Find electronic user guides
and specifications for your
computer model.
HP Support website: http://www.hp.com/go/contactHP
●
●
Order parts and find
additional troubleshooting
help.
Upgrade or replace
Upgrading and Servicing Guide
●
components of your computer.
HP Support website: http://www.hp.com/go/contactHP
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Type of information
Where to find
Find computer warranty
information.
Limited Warranty and Support Guide or the Warranty and Support
Information included with your computer.
●
●
Get technical support.
Or
Click Start, click All Programs, and then click HP User Manuals.
●
●
help from the Windows
community.
Connect to a TV.
Watching and Recording TV
Click Start, click All Programs, and then click HP User Manuals.
If the guide is not available there, visit http://www.hp.com/go/contactHP
Get special utilities for
computer owners.
PC Help & Tools folder
●
●
Click Start, click All Programs, and then click PC Help & Tools.
Maintain your computer.
HP Support Assistant — Maintains your computer performance and resolve
problems faster by using automated updates, on-board diagnostics, and
guided assistance.
Click Start, click All Programs, click HP, and then click HP Support
Assistant.
Troubleshooting and Maintenance Guide
Click Start, click HP Help and Support, and then click HP User
Manuals.
Maintaining Your Computer (this Guide)
Find safety and regulatory
notices.
Safety & Regulatory Information
●
●
Click Start, click HP Help and Support, and then click HP User
Find ergonomic information.
Safety & Comfort Guide
Click Start, click HP Help and Support, and then click HP User
2
Chapter 1 Getting information
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Setting up your computer
WARNING! To reduce the risk of electrical shock or damage to your
equipment:
• Place the computer in a location away from water, dust, moisture, and soot.
These can increase the inside temperature, or can cause fire or electrocution.
• Do not disable the power cord grounding plug. The grounding plug is an
important safety feature.
• Plug the power cord in a grounded (earthed) outlet that is easily accessible at all
times.
• Disconnect power from the equipment by unplugging the power cord from the
electrical outlet. To prevent direct exposure to laser beam, do not try to open the
enclosure of the CD or DVD drives.
• The power supply is preset for the country/region in which you purchased your
computer. If you move, check the voltage requirements for your new location
before plugging the computer into an AC power outlet.
The computer may be heavy; be sure to use ergonomically correct lifting
procedures when moving the computer.
To reduce the risk of serious injury read the Safety & Comfort Guide. The guide is
1. Place the computer so that all ventilation openings are unobstructed and
cabling is not in a walkway or where it can be stepped on or damaged by
placing furniture on it.
2. Connect all power cords from the monitor, computer, and accessories to a
power surge protection device that is specifically labeled as having surge
protection, an uninterruptible power supply (UPS), or a similar device. If the
computer has a television tuner, or a modem or telephone connection, protect
the computer by using surge protection with these signal inputs as well.
Connect the television cable or the telephone line cord to the surge protection
device, and then connect the device to the computer.
3. Download and install operating system updates.
a. Find out what operating system and version your computer is currently
running.
(Click Start > Control Panel and double-click System. The operating
system and version are shown under Windows edition.)
c. Select your country and language, if necessary, and click Support &
Drivers.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
d. Select Download drivers and software (and firmware), type
your computer model name and number in the product field, and press
Enter.
e. If necessary, select your computer model from Product search
results.
f. Select your computer operating system.
g. Click Download next to each update you wish to download.
h. Follow the on-screen instructions to install each downloaded update.
4. Look in the computer box for additional printed details or updates.
5. Read the Safety and Regulatory Information document in the HP User Manuals
folder.
6. Read the Safety & Comfort Guide for proper workstation setup, posture,
health and work habits, and electrical and mechanical safety information.
Click Start, click All Programs, and then click HP User Manuals or visit
After you complete the initial computer setup, you might want to install additional
software programs or hardware devices. Check the operating system, memory,
and other requirements listed before purchasing new software or hardware for
your computer. Follow the software manufacturer's directions to install the new
software.
NOTE: Use only licensed original software. Installing copied software could
result in an unstable installation, infect the computer with a virus, or be illegal.
Security solutions can deter theft, mishandling, and software attacks, but cannot
prevent them.
Connecting to the Internet
Steps to connect to the Internet:
1. Connect the hardware as shown on the setup view.
2. Get Internet service.
Sign up with an Internet Service Provider (ISP). If you already have an
account with an ISP, skip this step and follow the instructions provided
by the ISP.
●
If you did not set up the computer for Internet service during the initial
setup, do so now by using Online Services:
●
a. Click Start, click All Programs, click Online Services, and
then click Get Online.
b. Follow the on-screen instructions to select an ISP and set up Internet
service.
4
Chapter 2 Setting up your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Online Services provides a list of ISPs; however, you
might choose another ISP or transfer an existing account to this
computer. To transfer existing accounts, follow the instructions
provided by the ISP.
3. Using your Internet connection through your ISP, open a web browser and
browse the Internet.
NOTE: If you have issues connecting to the Internet, see Internet access
on page 16.
Connecting to the Internet
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Setting up additional features
Using Beats Audio™ (select models only)
Your HP TouchSmart PC features audio connectors (headphone and Audio Out )
that are optimized for Beats Audio™ headphones and external audio systems
(purchased separately). Select HP TouchSmart PC models also include four Beats-
optimized internal speakers and a Beats toggle button
on the keyboard.
Your computer comes ready for you to experience music with Beats enabled. To
disable Beats, press the Beats toggle button; the Beats-off icon appears on the
screen. To turn Beats on, press the Beats toggle button again. If your keyboard
does not contain the Beats toggle button, press Fn+B to enable and disable Beats.
Tap the Beats icon on the system tray to view the Beats user interface.
All you need to do is plug the Beats Audio headphones into the side headphone
connector to experience crisp and clear sound separation. To experience the full
capability of BEATS audio using the internal speakers, HP recommends connecting
a matching HP subwoofer to the Sub connector on the back panel. If you are using
an external audio system, plug it into the Audio Out connector on the back panel.
Using an HDMI monitor
If your computer has a graphics card with an HDMI (High Definition Multimedia
Interface) connector, Hewlett-Packard recommends using a DVI or VGA connector
for a monitor, and using HDMI to connect a TV.
If you use HDMI to connect your monitor, you may need to adjust some settings to
hear sound (see the following steps). Because of this, HP recommends that you
connect analog speakers to the computer if you want to hear sound during the
initial setup of the computer.
For optimum viewing, you may need to adjust the resolution setting for the monitor
(see “Adjusting resolution”).
Save this document for future use.
NOTE: If you ever need to recover the computer operating system by using the
Recovery Manager, you must repeat these procedures to activate sound and adjust
resolution for the HDMI connector.
IMPORTANT: Your HDMI monitor must be connected to the graphics card
before you activate sound and adjust resolution.
Activating sound
1. Right-click the Volume icon (white speaker) on the system tray.
2. Click Playback Devices. The Sound window opens.
6
Chapter 3 Setting up additional features
Download from Www.Somanuals.com. All Manuals Search And Download.
3. On the Playback tab, look for the Default Device. It may display a green
circle with a checkmark in it.
If the Default Device is one of the following, then your HDMI monitor is
already activated:
NVIDIA High Definition Audio (select models only)
ATI High Definition Audio (select models only)
Realtek HDMI Output
●
●
●
Click the Cancel button to close the window, and then continue with the next
procedure, “Adjusting resolution,” if necessary.
If the Default Device is not one of these devices, continue with step 4.
4. If one of the following HDMI options is available on the Playback tab, click
it:
NVIDIA High Definition Audio (select models only)
ATI High Definition Audio (select models only)
●
●
If neither of these is present, click Realtek HDMI Output.
5. Click Set Default.
6. Click OK to close the window. This completes the steps to activate HDMI
sound.
Adjusting resolution
To adjust resolution, follow the instructions for your type of graphics card. Right
click an empty area of the desktop, and then:
If NVIDIA Control Panel is present, follow the steps under “NVIDIA
●
●
●
graphics cards.”
If Catalyst Control Center is present, follow the steps under “ATI graphics
cards.”
If only Screen resolution is present, follow the steps under “Other graphic
cards.”
Using an HDMI monitor
7
Download from Www.Somanuals.com. All Manuals Search And Download.
NVIDIA graphics
cards
1. Right-click an empty area of the desktop, and then click NVIDIA Control
Panel. The View Selection window opens.
2. In the Selecting a Task area on the left, under Display, click Change
resolution. The Change resolution window opens.
3. If your HP computer is connected to an HP monitor, make sure that the
Show only TV resolutions check box does not contain a check mark.
If your HP computer is connected to a non-HP monitor, make sure that the
Show only TV resolutions check box contains a check mark. If
necessary, click the box to remove a check mark or add a check mark.
4. Close the NVIDIA Control Panel. This completes the steps to adjust
resolution for NVIDIA graphics cards.
ATI graphics cards
1. Right-click an empty area of the desktop, and then click Catalyst™
Control Center. The Catalyst Control Center window opens.
2. Select Graphics and then Desktops & Displays on the top left corner
of the window.
3. Under the Desktops & Displays window, right click the monitor icon at the
bottom left corner of the window and select Configure. The DTV
(HDMITM) 2 window opens.
4. If your HP computer is connected to an HP monitor, make sure that the
Show only TV resolutions check box does not contain a check mark.
If your HP computer is connected to a non-HP monitor, make sure that the
Show only TV resolutions check box contains a check mark. If
necessary, click the box to remove a check mark or add a check mark.
5. Click OK. This completes the steps to adjust resolution for this option.
Other graphics cards 1. Right-click an empty area of the desktop, and then click Screen
resolution.
2. Select the resolution from the drop-down menu.
3. Click Apply, and then click Keep changes. This completes the steps to
adjust resolution for this option.
Setting up multiple displays
Use the following steps to connect and set up additional monitors:
These instructions are for standard two-monitor setup. If you have purchased a
dual-monitor system with ATI™ Eyefinity software, follow these instructions for dual-
8
Chapter 3 Setting up additional features
Download from Www.Somanuals.com. All Manuals Search And Download.
monitor setup (or for three monitors), and proceed to the instructions for ATI
Eyefinity Catalyst™ setup.
1. Verify that the PC is set up according to the instructions in the setup view. Do
not power on the PC or monitor.
2. Connect the monitors to an available display connector on the back of the
PC. The monitor’s connection type must match the connector on the PC.
NOTE: The three-monitor setup requires that you separately purchase
an additional monitor and cable. The monitor should have a DVI, HDMI, or
VGA connector. A DVI-to-VGA adapter is required for monitors with a VGA
connector.
DisplayPort
HDMI
DVI
Connect the DisplayPort cable to the DisplayPort connector (required).
Connect the DVI cable to the bottom DVI connector.
●
●
3. Connect power to each additional monitor.
4. Press the power button on each display and then press the power button on
the computer. The power indicator light on each of the displays will be
amber; the lights will turn blue when the PC starts.
NOTE: During the initial setup, only one display is active; you may see
various display states (such as blank screens, blue screens, etc.) on the other
displays until the setup is completed.
5. When the setup is complete, you will see the extended desktop on all
connected displays.
6. To change the display mode for a display, select Start, select Control
Panel, select Display, and then select the option you want to change and
follow the onscreen instructions.
ATI Eyefinity Catalyst™ setup
1. Right-click on the Eyefinity Catalyst™ icon on the desktop to bring up ATI
Catalyst Control Center™, or select Start, select All Programs, and
select Catalyst Control Center™.
2. Select CCC-Advanced, select Graphics, and select Desktop &
Displays, then follow the onscreen instructions to set up the layout for the
two- or three-monitor display.
Setting up multiple displays
9
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Maintaining your computer
Cleaning procedures
Keeping your computer system free of dust, dirt, and heat will prolong its life.
Dust, pet hair, and other particles can build up, creating a blanket effect; as a result, components can
overheat or, in the case of the keyboard and mouse, not work smoothly and effectively.
●
●
●
Check your system once a month for visible signs of dust and debris, and clean it about once every three
months.
Cleaning the computer
vents
Air vents keep the computer cool. Keep these vents clean by using a small, battery-
powered vacuum cleaner. (A battery-powered vacuum cleaner eliminates the risk of
electric shock.)
1. Vacuum the vents on the computer case.
2. Remove any debris that has accumulated in and around the computer
connectors (for example, the Ethernet and USB connectors).
Cleaning the keyboard and When cleaning the keyboard keys, use a low setting on a battery-powered vacuum
mouse
cleaner, to avoid removing key caps and springs.
1. Vacuum between the keys of the keyboard and along the grooves.
2. Use a clean, dry cloth and isopropyl (rubbing) alcohol to clean buildup on the
keyboard keys and along its edges.
3. Wipe the body of the mouse and the mouse cord by using cleaning wipes.
If you have a roller-ball mouse, clean the ball and rollers inside:
1. Turn the mouse upside down, and rotate the ball-cover ring counterclockwise
to remove the ring and release the roller ball.
2. Rinse the roller ball with soap and warm water.
3. Clean the rollers inside the mouse with a cotton swab dampened with
isopropyl (rubbing) alcohol.
4. After the roller ball and rollers are completely dry, replace the ball and ball-
cover ring.
10
Chapter 4 Maintaining your computer
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Troubleshooting
Refer to the documentation provided by the product manufacturer for information
about peripheral-specific problems, such as issues with a monitor or a printer. The
following tables present some issues you might encounter while installing, starting
up, or using your computer and possible solutions.
For more information or for additional troubleshooting options, see Getting
information on page 1.
Computer does not start
Symptom
Possible solution
Error message:
Hard disk drive
error.
Restart the computer.
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Click the Arrow button next to the red Shut Down button, and then click Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off
the computer, and then press the Power button to restart the computer.
3. If Windows opens, immediately back up all important data to a backup hard disk drive.
4. Contact Support, whether it was possible or not to start up Windows.
Either the hard disk drive or the system board may need to be replaced.
Computer will
not turn on or
start.
Ensure that the cables connecting the computer to the external power source are plugged in
properly. When the cables connecting the computer to the external power source are plugged
in properly, and the wall outlet is functioning, the green power supply light on the back of the
computer should be on; if it is not, contact Support.
If the display (monitor) is blank, the monitor might not be properly connected. Connect the
monitor to the computer, plug it in, and turn it on. See Display (monitor) on page 13.
Test the wall outlet by connecting a different electrical device to it.
Computer does not start
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible solution
Computer seems Use the Windows Task Manager to close any programs not responding, or restart the
to be locked up
and is not
computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Click Start Task Manager.
responding.
3. Select the program that is not responding, and then click End Task.
If closing programs does not work, restart the computer:
1. Press the Ctrl+Alt+Delete keys on the keyboard simultaneously.
2. Click the Arrow button next to the red Shut Down button, and then click Restart.
Or, press and hold the Power button on the computer for 5 or more seconds to turn off
the computer, and then press the Power button to restart the computer.
Error message:
Invalid system
disk or Non-
System disk or
Disk error.
When drive activity stops, remove the disc and press the spacebar on the keyboard. The
computer should start up.
12
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Power
Symptom
Possible solution
Computer does
not turn off when
the Power button
is pressed.
Press and hold the Power button until the computer turns off. Check Power Settings.
Computer shuts
down
The computer might be in an exceedingly hot environment. Let it cool down.
●
●
Ensure that computer air vents are not blocked and that the internal fan is running — see :
Cleaning procedures on page 10. (Your computer might not have an internal fan.)
automatically.
Display (monitor)
Symptom
Possible solution
Screen is blank, and Reconnect the power plug to the back of the monitor and to the wall outlet.
monitor power light
Press the Power button on the monitor.
is not lit.
Screen is blank.
Press the space bar on the keyboard or move the mouse to make the screen display visible
again.
Press the Sleep button (select models only), or Esc on the keyboard, to resume from Sleep
mode.
Press the Power button to turn on the computer.
Inspect the monitor video connector for bent pins:
If any of the pins are bent, replace the monitor connector cable.
●
●
If no pins are bent, reconnect the monitor connector cable to the computer.
If you have a multi-monitor setup, refer to Setting up multiple displays on page 8, under
Setting up advanced features.
Power
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard and mouse (general)
Symptom
Possible solution
Keyboard
Use the mouse to turn off the computer, unplug and reconnect the keyboard to the back of
your computer, and then restart your computer.
commands and
typing are not
recognized by the
computer.
Mouse (with cable)
does not work or is
not detected.
Unplug and reconnect the mouse cable to your computer.
If the mouse is still not detected, turn off the computer, unplug and reconnect the mouse
cable, and then restart the computer.
Cursor does not
move using the
arrow keys on the
number keypad.
Press Num Lock on the keyboard to turn off Num Lock, so that the arrow keys on the
number keypad can be used.
Cursor does not
respond to mouse
movement.
Use the keyboard to save changes in all open programs, and then restart your computer:
1. Press the Alt+Tab keys simultaneously to navigate to an open program.
2. Press Ctrl+S simultaneously to save your changes in the selected program (Ctrl+S is
the keyboard shortcut for Save on most—not all—programs).
3. Repeat step 1 and step 2 to save changes in all open programs.
4. After saving changes in all open programs, press the Ctrl+Esc keys on the keyboard
simultaneously to display the Windows Start menu.
5. Use the arrow keys to select the Arrow button that is next to Shut Down. Select Shut
Down, and then press Enter.
6. After the shutdown is complete, unplug and reconnect the mouse connector to the
back of your computer, and then restart your computer.
14
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Keyboard and mouse (wireless)
Symptom
Possible solution
Wireless keyboard
or mouse does not
work or is not
detected.
Ensure that you are using the wireless keyboard or wireless mouse within range of the
●
●
receiver, approximately 3 meters (10 feet) for normal use, and within 30 cm (12
inches) during initial setup or for re-synchronization.
Ensure that the mouse is not in Suspend mode, which occurs after 20 minutes of
inactivity. Click the left mouse button to reactivate it.
Replace the batteries in the keyboard and mouse.
●
●
Re-synchronize the keyboard and mouse to the receiver using the following steps.
The receiver, wireless keyboard, and wireless mouse shown in the following illustrations
are examples; your models might vary. IMPORTANT: During these steps, place the
wireless keyboard and wireless mouse on the same level as the receiver, within 30 cm (12
inches) of the receiver, and away from interference from other devices.
1. Unplug the receiver from a USB connector on the computer, and then reconnect it.
Your computer model might have a connector dedicated to the receiver. If you have a
choice, use a USB connector on the front of the computer.
2. Check that the mouse is on (A), and push and hold the Connect button (B) on the
underside of the mouse for 5 to 10 seconds until the LED on the receiver lights or
stops flashing. The receiver connection session times out after 60 seconds. To ensure
that the connection was established, and that the receiver did not time out instead,
move the mouse and check for response on the screen.
B
Off
Connect
On
A
3. After the mouse connection is established, continue by using the steps that follow to
repeat the procedure for the keyboard.
4. Push and hold the Connect button (C) on the underside of the keyboard for 5 to 10
seconds until the LED on the receiver lights or stops flashing.
C
Keyboard and mouse (wireless)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Speakers and sound
Symptom
Possible solution
No sound is
produced.
For Windows 7:
1. Click Start, click Control Panel, click Action Center, and then click
Troubleshooting.
2. Under Hardware and Sound, click Troubleshoot and audio playback.
If you use an High-Definition Multimedia Interface (HDMI) connector on the graphics card
(select models only) to connect your monitor to the computer, you should also connect
analog speakers to the computer Audio Line Out connector if you want to hear sound
during the initial setup of the computer. Refer to the Setup Poster to connect analog
speakers.
If you are using built-in monitor speakers, use the monitor front-panel Volume button to
adjust volume. Use the front-panel buttons to enter the on-screen display (OSD) and ensure
that audio is enabled and that the volume is set appropriately.
Ensure that you connected powered (active) speakers and that they are turned on.
Turn off your computer, and then unplug and reconnect the speakers. Ensure that the
speakers are connected to an audio connector, not a Line In or headphone connector.
To resume from Sleep mode, press the Sleep button (select models only), or press Esc.
Unplug headphones if they are connected to your computer (or speaker system).
Volume is very low
or unsatisfactory.
Ensure that you connected the speakers to the Audio Out (lime green) connector on the
back of the computer. (Additional audio connectors are used for multiple-channel
speakers.) Detached non-powered speakers (speakers without a separate power source,
such as batteries or a power cord) do not produce satisfactory sound. Replace the non-
powered speakers with powered speakers.
Internet access
Symptom
Possible solution
Internet programs do Log in to your ISP, and start the desired program.
not start
automatically.
16
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Possible solution
I cannot connect to
the Internet.
For Windows 7:
1. Click Start, click Control Panel, click Action Center, and then click
Troubleshooting.
2. Under Network and Internet, click Connect to the Internet.
Verify that you are using the proper cables for your Internet connection type. Your
computer might have a dial-up modem and an Ethernet network adapter (also called a
network interface card, or NIC). A modem uses a standard telephone cable, whereas the
network adapter uses a network cable, to connect to a local area network (LAN). Do not
connect a telephone cable to the network adapter, and do not plug a network cable into a
telephone service line; doing so might damage the network adapter.
Run the wireless setup wizard:
1. Click Start, click Control Panel, click Network and Internet, and then click
Network and Sharing Center.
2. In the Network and Sharing Center window, click Set up a connection or
network to open the wizard, and then follow the on-screen instructions.
If your system has an external antenna, try to move the antenna to a better position. If the
antenna is internal, try to move the computer.
Try to connect again later, or contact your Internet service provider (ISP) for assistance.
Software troubleshooting
To repair
Turn the computer off completely and then turn it on again. This is the easiest (and
sometimes the best) way.
●
software
problems, try
these methods:
Update the drivers (see Updating device drivers, following).
●
●
Use Microsoft System Restore Software program and hardware driver reinstallation (see
Microsoft System Restore, later in this table). — Restores your computer to a configuration
that was in use before the software was installed.
Reinstall the software program or hardware driver (see Software program and hardware
driver reinstallation, later in this table). — Restores the software (if it came with the
product) or hardware driver to factory defaults.
●
●
System Recovery (see Troubleshooting and Maintenance Guide on your computer. At the
bottom of your screen, click on Start, then click HP Help and Support and HP User
Manuals. ) — Erase and reformat the hard disk drive, and then reinstall the operating
system, programs, and drivers. This erases all data files you have created.
Software troubleshooting
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Updating device Complete the following procedure to update a driver, or to revert to an earlier version of the
drivers
driver if the new one does not solve your problem:
1. Click Start.
2. Type Device Managerinto the Start Search box, and then click Device Manager
to open the Device Manager window.
3. Click the plus sign (+) to expand the type of device you want to update or rollback. (For
example, DVD/CD-ROM drives).
4. Double-click the specific item (for example, HP DVD Writer 640b).
5. Click the Driver tab.
6. To update a driver, click Update Driver, and then follow the on-screen instructions.
Or, to revert to an earlier version of a driver, click Rollback Driver, and then follow the
on-screen instructions.
Microsoft System If you have a problem that might be due to software that was installed on your computer, use
Restore
System Restore to return the computer to a previous restore point. You can also set restore
points manually.
NOTE: Always use this System Restore procedure before you use the System Recovery
program.
To start a System Restore:
1. Close all open programs.
2. Click Start, right-click Computer, and then click Properties.
3. Click System protection, System Restore, click Next, and then follow the on-
screen instructions.
To add restore points manually:
1. Close all open programs.
2. Click Start, right-click Computer, click Properties, and then click System
protection.
3. Under Protection Settings, select the disk for which you want to create a restore point.
4. Click Create, and then follow the on-screen instructions.
18
Chapter 5 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Software
If any of your factory-installed software programs or hardware drivers are damaged, you can
reinstall it by using the Recovery Manager program (select models only).
program and
hardware driver
reinstallation
NOTE: Do not use the Recovery Manager program to reinstall software programs that came
on CDs or DVDs included in the computer box. Reinstall these programs directly from the CDs
or DVDs.
Before you uninstall a program, be sure you have a way to reinstall it. Check to be sure that it
is still available from where you initially installed it (for example, discs or the Internet). Or
check to be sure that the program is in the list of programs you can reinstall from the Recovery
Manager.
To check the list of installable programs in the Recovery Manager:
1. Click Start, All Programs, Recovery Manager, and then click Recovery
Manager. If prompted, click Yes to allow the program to continue.
2. Under I need help immediately, click Software Program Reinstallation.
3. Click Next at the Welcome screen. A list of programs opens. Check whether your
program is there.
To reinstall a program using the Recovery Manager:
1. Click Start, click All Programs, click Recovery Manager. and then click Recovery
Manager.
2. Click Software Program Reinstallation, and then click Next at the Welcome
screen.
3. Choose the program you want to install, click Next, and follow the on-screen
instructions.
4. When you have finished reinstalling, restart the computer. Do not skip this last step.
You must restart the computer after recovering software programs or hardware drivers.
To uninstall a program:
1. Close all software programs and folders.
2. Click Start, and then click Control Panel.
3. Under Programs, click Uninstall a program.
4. Select the program you want to remove, and then click Uninstall.
Software troubleshooting
19
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Support information
Ways to get help
Easy to reach. Easy to use. Award-winning HP Customer Support is our promise to
help you get the most from your computer. Whether with tools located on your
computer, from information on the web, by phone, or through your local retailer,
you’ll find what you need.
Before contacting the HP Customer Care Center, it’s important to have the
following information handy.
Model number
System (product) number
Serial number
Software build number
Operating system
Purchase date
●
●
●
●
●
●
Please take a moment to write down your product information for future reference.
The first four items on the list (model number, product number, serial number, and
software build number) can be viewed by pressing the Ctrl+Alt+S keys on the
keyboard at the same time.
Don’t forget to register!
Where to get help
1. Use the Help and Support Center for help with hardware and software
questions. Click Start, and then click Help and Support. The Help and
Support Center provides useful troubleshooting information and includes the
following:
E-mail support
HP Real Time Chat with qualified support specialists
Support phone numbers
●
●
●
2. If you think you have a hardware issue, before calling the Customer Care
Center, run the hardware diagnostic tools that are preinstalled on your
computer. Click Start, All Programs, PC Help & Tools, and then click
Hardware Diagnostic Tools.
3. For help online, go to the HP Customer Care Center website at
20
Chapter 6 Support information
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone assistance to get you up and running is covered for thirty (30) days from the
time you purchased your computer. After thirty (30) days, there may be a charge,
but the helpful support is still available.
Customer support for repairs
If your computer needs to be repaired or to have parts replaced, you have two
choices:
You can easily replace many of your computer parts that are considered
consumer replaceable. This is the fastest method of repair, as many times we
can send the part directly to your home or business in a few days.
If a repair is necessary, the HP Customer Care Center will make
arrangements to fix your computer.
●
●
These services are covered during the warranty period.
There are a few limitations and exclusions to the warranty (as well as some
important details), which are described in the Hardware Limited Warranty section
of the Limited Warranty and Support Guide.
Before upgrading your hardware
Any hardware upgrades that you intend to do should only be done after you have
completely set up your new computer. Refer to the setup poster included with your
system for help with setting up. If you have any problems setting up your system
and turning it on, immediately contact the HP Customer Care Center listed earlier
in this guide, and a HP Customer Representative will assist you. This must be done
first before attempting to upgrade your system.
By breaking the security seal on the back of the computer, you are confirming that
the computer was working properly before you attempted to upgrade your system.
Once the security seal has been broken, your computer is then, to the extent
allowed by local law, covered under the terms and conditions listed in the
Hardware Limited Warranty section of the Limited Warranty and Support Guide.
Customer support for repairs
21
Download from Www.Somanuals.com. All Manuals Search And Download.
The power to make a change
Thank you for your purchase. HP is dedicated to producing the highest quality, best performing, and easiest to
use computers in the world. HP also designed this product with the environment in mind.
But to reduce its impact even further, we need your help.
Let’s work together to make a change.
How you can help
What we do
Recycle your old computer.
We design with the environment in mind.
Disposing of electronic waste responsibly has been While we want you to enjoy this computer for many
an HP priority for more than 20 years. If this
computer is a replacement for an older computer
you no longer need, go to
can help you dispose of your old computer with
minimum impact on the planet.
years to come, we recognize that you will eventually
dispose of it. We have designed it so it can be easily
dismantled and recycled as much as possible. The
packaging that came with your computer is also
designed for maximum recyclability.
Don't use a screen saver.
We design to be more energy efficient.
Screen savers can prevent your HP computer from
going to sleep and thereby waste power. Screen
savers can also reduce the life of your monitor by
This computer has HP Power Management Technology,
which can reduce computer energy use up to 45%
compared to computers without power management.
increasing the number of hours the LCD backlight is HP computers keep energy needs to a minimum, saving
on.
you money and reducing your carbon footprint.
Don't disable the power settings.
We design our products to use better and fewer
materials.
The power management tools on this computer are
set to minimize energy use without impacting
performance. Please do not disable them.
Ensuring the health of you, your family, and our planet
is a key priority at HP. We are committed to using the
safest materials in the production of this and all our other
products.
Printed in
*674264-002*
674264-002
Download from Www.Somanuals.com. All Manuals Search And Download.
|