HP Photosmart E427
Digital Camera
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Getting started.......................................................................................................5
Reviewing images and video clips....................................................................15
Transferring and printing images......................................................................18
Using the Setup Menu.........................................................................................20
Troubleshooting..................................................................................................21
Product support...................................................................................................25
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Managing batteries..............................................................................................26
Specifications......................................................................................................29
Index............................................................................................................................31
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
1
Use this section to get familiar with camera controls, set up your digital camera for use,
and begin taking pictures.
Camera top, back, and side
1
2
3
4
5
6
8
7
1
2
Live View/Playback button—Switches between Live View and
3
and
buttons—Scroll through menus and images and access digital
zoom. While in Live View, press / to zoom in; press
/
to zoom out (see
4
5
6
Power light.
button—Displays camera menus, selects options, and confirms actions.
7
8
Image Display.
USB connector.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Chapter 1
Camera front, bottom, and side
1
2
3
7
6
4
5
1
2
3
4
Flash.
Microphone.
Focus switch—Switches between
Macro and
5
6
7
Tripod mount.
Battery/Memory card door.
Lens cover/Power switch—Turns the camera on and off and protects the lens
while the camera is off.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the batteries
1. Open the Battery/Memory card door by sliding the Battery/Memory card door toward
the bottom of the camera.
2. Insert the batteries.
3. Close the Battery/Memory card door.
Note Turn off the camera before removing the batteries.
If using rechargeable NiMH batteries, fully charge the
batteries before using them the first time (see Recharging
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn on the camera
To turn on the camera, slide the lens cover open until it
clicks, uncovering the lens.
To turn off the camera, slide the lens cover closed until it
clicks, covering the lens.
Caution When sliding the lens cover, keep your
fingers clear of the lens. Fingerprints on the lens
can impair the quality of the picture.
Choose the language
The Language setting you choose also determines the default date and time format.
Use
.
to choose the language you want, then press
To change the language later, use the Setup menu (see
Set the date and time
Accurately setting the date and time will help you locate images once you have
transferred them to your computer, and will ensure that images are accurately marked if
1.
2. Use
Use
to adjust the highlighted value.
to move to the other selections and repeat
Step 1 until the date and time are set correctly.
Press when the date, time, and format settings
are correct, then press again to confirm.
3.
To change the date and time later, use the Setup
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Chapter 1
Install and format an optional memory card
This camera supports standard and high speed, HP-branded Secure Digital (SD)
memory cards, 16MB to 1GB.
1. Turn off the camera and open the Battery/Memory card door.
2. Insert the optional memory card in the small slot as
shown. Make sure the memory card snaps into place.
3. Close the Battery/Memory card door and turn on the
camera.
Always format new memory cards before first use.
Formatting removes all images from the memory card, so
make sure to transfer existing images before formatting
1.
With the camera turned on, press
until
appears briefly in the upper right corner of the
Image Display. This indicates you are in Playback.
2.
3.
4.
Press
Use
Use
.
to select Format Card, then press
to select Yes, then press to format the card.
.
Note Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view
images stored there, remove the memory card. To transfer images from internal
Install the software
The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, adjust image quality, and more). See the Help feature in the HP
Photosmart Software.
Note If you have trouble installing or using the HP Photosmart Software, see
Windows
If your Windows computer:
●
Has a minimum of 128MB of RAM, Windows XP or x64, and Internet Explorer 5.5
Service Pack 2 or higher (Internet Explorer 6 is recommended), you have the option
to install either HP Photosmart Premier or HP Photosmart Essential.
Has a minimum of 128MB of RAM, Windows 2000, and Internet Explorer 5.5 Service
Pack 2 or higher (Internet Explorer 6 is recommended), HP Photosmart Essential is
installed.
●
8
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Close all programs and temporarily disable any virus protection software.
2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click Start, click Run, type
D:\Setup.exe, where D is the letter of your CD drive, then click OK.
3. When the software has finished installing, re-enable virus protection software.
Macintosh
To install the HP Photosmart Mac software, your Macintosh computer must meet the
system requirements as stated on the camera packaging.
1. Insert the HP Photosmart Software CD into the CD drive.
2. Double-click the CD icon on the computer desktop.
3. Double-click the installer icon, then follow the on-screen instructions.
About the HP Photosmart Software
The CD that came with your camera contains the following versions of HP Photosmart
Software:
●
HP Photosmart Premier Software (for Windows XP and x64 systems with at least
128MB of RAM). This version of the software includes some extra features that let
you pause a video and print a frame from it.
●
●
HP Photosmart Essential Software (for Windows 2000, Windows XP, and x64
systems with at least 128MB of RAM).
HP Photosmart Mac Software (for Macintosh systems).
To learn more about the software features and how to use them, see the Help feature in
the HP Photosmart Software.
Using your camera
Now that you’ve completed setup, you can take and review still images and video clips.
capturing video clips
video clips on the camera
For information on transferring images
from your camera to a computer
For information on printing images
Tip To switch between Live View and Playback, press
.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Taking pictures and recording
video clips
2
Live View allows you to frame pictures and video clips in the Image Display. To activate
Live View, press
until
appears briefly in the upper right corner of the Image
Display. The Live View display looks like this:
1
2
3
Memory card indicator.
12
Pictures remaining count.
Taking still pictures
You can take a picture almost any time the camera is on and not in Video shooting mode.
1.
appears briefly in the upper right corner of the Image Display.
Press
This indicates you are in Live View.
2. If appears in the upper left corner of the Image Display, switch to any other
until
shooting mode. For information about changing shooting modes, see Using the
3. Frame the subject for your picture.
4. Press the Shutter button all the way down to take the
picture.
Recording video clips
1.
Press
until
appears briefly in the upper right corner of the Image Display.
This indicates you are in Live View.
2.
Switch to Video shooting mode. Press
, press to highlight the Capture
Menu, use
to highlight Shooting Modes, press
, use
to highlight
Video, press
, then press
to return to Live View. For more information
10
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Frame the subject.
4. Press and release the Shutter button.
5. To stop recording video, press and release the Shutter
button again.
Instant Review
After you have taken a still image or recorded a video clip, the camera displays it briefly
in Instant Review. If you want to delete the image or video clip, press , select This
Image from the Delete sub-menu, then press
.
Digital zoom
Your camera has digital zoom, which uses no moving lens parts. In digital zoom, the
Image Display shows a yellow frame around the scene and the image quality setting (MP
value). As you zoom in, the scene expands to show what the camera will capture, and
the MP value decreases to indicate the resolution at which the scene will be captured.
When capturing images using digital zoom, make sure that the MP value on the Image
Display is appropriate for the size at which you want to print the captured image. For MP
1. While in Live View, press and hold until the image you want to capture fills the
yellow frame. If you zoom in too far, press
.
2.
To exit digital zoom, press until the yellow frame disappears.
Note Digital zoom is not available when recording video clips.
Using the focus range settings
To change focus range settings, slide the Focus Switch to
for Macro or to
for
Normal. The Image Display indicates the setting you have chosen.
Normal Focus (Default)—Use when taking pictures of subjects greater
than 1 m (39.4 in) away.
Macro—Use when taking close-up pictures of subjects between 600 mm
and 1 m (23.6 to 39.4 in) away.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Chapter 2
Using the Capture Menu
The Capture Menu allows you to adjust camera settings that affect the characteristics
of the images and video clips you capture.
1.
2.
While in Live View or Playback, press
Use
sub-menu.
, then use
to highlight
.
to highlight a menu option, then press
to display the menu option’s
3.
4.
Use
Press
to highlight a setting, then press
to exit the Capture Menu.
.
Except as noted, Capture Menu settings remain in effect until they are changed or until
they return to their default settings when you turn off the camera.
Shooting Modes—For selecting a shooting mode.
●
●
●
●
●
Auto Mode (Default)—For taking good shots quickly, when you do not
have time to select a special shooting mode.
Landscape—For scenes with deep perspective, such as mountain
scenes.
Portrait—For pictures that have one or more people as their primary
subject.
Action—For capturing sporting events, moving cars, or any scene where
you want to stop the action.
●
●
Sunset—For capturing outdoor scenes at sunset.
Flash Setting—For selecting a flash setting.
●
●
Auto Flash (Default)—The camera uses the flash if necessary.
Red-Eye—The camera uses the flash with red-eye reduction, if
necessary, to minimize the possibility of human eyes appearing red in the
final image. For information about red-eye, see Flash Setting—Red-Eye
●
●
Flash On—The camera always uses flash. If the light is behind your
subject, use this setting to increase the light on the front of your subject.
Flash Off—The camera does not use flash. Use this setting to capture
poorly lit subjects beyond the flash range or to capture scenes with the
existing light.
●
Night—The camera uses the flash with red-eye reduction, if necessary,
to illuminate objects in the foreground, then continues to expose as if the
flash had not been used, to gather the light in the background.
Image Quality—Sets resolution and compression for images. The greater the
number, the higher the resolution.
●
●
●
6MP Best—For enlarging or printing images greater than 28 x 36 cm (11
by 14 in).
Normal (6MP) (Default)—For printing images up to 28 x 36 cm (11 by 14
in).
4MP—For printing images up to 20 x 25 cm (8 by 10 in).
12
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
●
2MP—For printing images up to 13 x 18 cm (5 by 7 in).
●
VGA—For sending images via e-mail or posting them to the Internet.
The Image Quality setting remains in effect until you change it, even if you
turn off the camera.
Date & Time Imprint—Imprints date in lower left corner of image.
●
●
●
Off (Default)—No date or time imprinted on the image.
Date Only—Date permanently imprinted.
Date & Time—Date and time permanently imprinted.
The Date & Time Imprint setting remains in effect until you change it, even if
you turn off the camera.
Exposure Compensation—Overrides the camera’s automatic exposure
●
To make the images you are about to capture brighter, press to increase
the value.
●
To make the images you are about to capture darker, press to decrease
the value.
White Balance—Balances color based on lighting conditions. For more
●
Auto (Default)—Corrects for scene illuminance. For general picture
taking.
●
●
●
●
Sun—For outdoor scenes in sunny or cloudy conditions.
Shade—For outdoor scenes in shade or at dusk.
Tungsten—For indoor scenes with incandescent or halogen lighting.
Fluorescent—For indoor scenes with fluorescent lighting.
ISO Speed—Adjusts the camera’s sensitivity to light. For more information,
●
●
●
●
Auto (Default)—Camera selects the best ISO speed for the scene.
ISO 100—For lower light conditions.
ISO 200—For fast moving objects or in dark areas without a flash.
ISO 400—For lower light conditions and/or action when short shutter
speeds are desired.
Note Some Capture Menu options are not available in certain shooting modes.
In addition, some do not apply when recording video clips.
Using the Self-Timer mode
The Self-Timer allows you to take a still image 10 seconds after pressing the Shutter
button.
1.
While in the Shooting Modes sub-menu, use
, then press
to highlight Self-Timer, press
.
2. Set the camera on a tripod or stable surface.
3. Frame the subject in the Image Display.
4. Press and release the Shutter button. The camera begins the 10-second
countdown, then takes the still image.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Chapter 2
The Self-Timer setting resets to the default Auto shooting mode after the picture is taken.
Flash Setting—Red-Eye
The red-eye phenomenon is caused when light from the flash reflects off the subjects'
eyes, which can make human eyes appear red in the captured image. Using Red-
Eye causes the camera to flash quickly up to three times to shrink the subject's pupils
(reducing the effect of the red-eye phenomenon) before using the main flash and
capturing the image. Since it takes longer to take a picture using this setting, make sure
your subjects wait for the additional flashes.
Exposure Compensation
You can use Exposure Compensation to override the camera's automatic exposure
setting. Exposure Compensation is useful in scenes that contain many light objects
(like a white object against a light background) or many dark objects (like a black object
against a dark background). Such scenes could turn out gray without the use of
Exposure Compensation. For a scene with many light objects, increase the Exposure
Compensation to a positive number. For a scene with many dark objects, decrease the
Exposure Compensation.
White Balance
Different lighting conditions cast different colors. This setting allows the camera to
compensate for this, reproducing colors more accurately and ensuring that whites appear
white in the final image. You can also adjust the white balance to produce creative effects.
For example, the Sun setting produces a warmer look to the image.
ISO speed
This setting adjusts the sensitivity of the camera to light. When ISO Speed is set to the
default Auto setting, the camera selects the best ISO speed for the scene.
Lower ISO speeds capture images with the least amount of grain (or noise), but result in
slower shutter speeds. If taking a picture in low light conditions without a flash at ISO
100, use a tripod.
Higher ISO numbers allow faster shutter speeds, and can be used when taking pictures
in dark areas without a flash, or when taking pictures of fast moving objects. Higher ISO
speeds produce pictures with more grain (or noise) and, therefore, can be of lower quality.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Reviewing images and video
clips
3
You can review and delete images and video clips in Playback as described here.
Using Playback
1.
2. Use
When viewing video clips, press
Press
until
appears in the upper right corner of the Image Display.
to scroll through your images and video clips (video clips play automatically).
to stop the clip; press
again to go to the
Playback Menu.
3.
To switch to Live View, press
.
During Playback, the Image Display also indicates additional information about each
image or video clip.
1
2
3
Memory card indicator.
Number of images to print (see Selecting images for printing
3
4
0:15
●
●
●
Recorded length of this audio or video clip.
Audio clip attached.
Video clip indicator.
5
1 of 30
Number of this image or video clip out of the total number of
stored images and video clips.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Chapter 3
Deleting images
To delete a displayed image during Playback:
1.
2.
Press
Use
.
to select an option, then press
.
–
–
–
–
Cancel—Returns to Playback without deleting the displayed image.
This Image—Deletes the image or video clip.
All Images (in Memory/on Card)—Deletes all stored images and video clips.
Format (Memory/Card)—Deletes all stored files, then formats the internal
memory or memory card.
Using the Playback Menu
1.
2.
3.
While in Playback, press
.
Use
to highlight an option.
Use
to select an image or video clip, press
, and follow the on-screen
instructions.
4.
Press
to exit the Playback Menu.
Rotate—Rotates images in 90-degree increments.
Use
to rotate the image clockwise or counter-clockwise in 90-degree
to save the image in the new orientation.
increments. Press
Move Images to Card—Moves images from internal memory to a memory
card. Available only if there are images in internal memory and a memory card
is installed.
To move images, select this option and follow the on-screen prompts.
Viewing thumbnails
To view thumbnails:
1.
From the Playback Menu, select
Thumbnails.
View
2.
3.
Use
Press
and
to scroll through the thumbnails.
to view the highlighted image on the
Image Display.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Magnifying images
This feature is for viewing purposes only; it does not permanently alter the image.
1.
From the Playback Menu, select Magnify. The
currently displayed image is magnified 2x.
2.
Use
and
to pan around the magnified
image.
Press
Press
3.
4.
to increase magnification up to 4x.
again to return to Playback.
Selecting images for printing
To select an image for printing:
1. While in Playback, use
to display an image you want to mark for printing.
2. From the Playback Menu, select
Print.
3.
Use
to specify the number of copies to print (up to 99), then press
. To
deselect this image for printing, select
Print again, set the number of copies
to 0, then press
.
4. To select additional images to mark for printing, use
repeat Steps 2 and 3.
to display an image, then
5.
Press
to exit the Playback Menu and return to Playback.
For information about printing selected images, see Printing images from the camera
Recording audio
Record Audio allows you to record an audio clip and attach it to an existing image.
1.
2.
From the Playback Menu, select Record Audio to immediately start recording.
To stop recording and attach the audio clip to the displayed image, press
.
If the currently displayed image already has an audio clip attached to it, the Record
Audio sub-menu displays instead when you select Record Audio.
●
Keep Current Clip—Retains the current audio clip and returns to the Playback
Menu.
●
●
Record New Clip—Records a new audio clip, replacing the previous audio clip.
Delete Clip—Deletes the current audio clip and returns to the Playback Menu.
Note To hear audio associated with still images or video clips, transfer them to
your computer using the HP Photosmart Software (see Transferring and printing
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Transferring and printing images
4
You can transfer images and video clips with or without the HP Photosmart Software that
came with your camera. However, the HP Photosmart Software has several features for
transferring and managing your images and also guides you through the transfer
process.
Transferring images with HP Photosmart Software
use this method to transfer images and video clips to your computer.
on page 17), verify that the computer is connected to a printer.
2. Connect the camera and computer using the USB
cable that came with your camera.
3. Turn on the camera and follow the instructions on
the computer screen to transfer the images. For
more information, see the Help feature in the
HP Photosmart Software.
Transferring images without HP Photosmart Software
If you do not install the HP Photosmart Software, images marked for printing (see
the camera to the computer. However, you can still transfer images and video clips to
your computer by:
●
Connecting your camera directly to the computer (see Connecting to the computer
●
Connecting to the computer
1. Turn off the camera, connect the camera and computer using the USB cable that
came with your camera, then turn on the camera.
–
On Windows computers, the camera appears as a device in Explorer, allowing
you to copy images from the camera to the computer.
–
On Macintosh computers, either Image Capture or iPhoto starts automatically,
allowing you to transfer images to the computer.
2. When you have finished transferring images, disconnect the camera from the
computer. If your computer is running Windows 2000 or XP and you get an Unsafe
Removal warning, disregard the warning.
If you encounter problems, set the camera’s USB Configuration to Disk Drive (see
computer.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Note On Macintosh computers, if you set the camera to Disk Drive and neither
Image Capture nor iPhoto starts automatically, look on the desktop for a disk drive
icon with the label HP_E427 and copy the images manually. For more information
about how to copy files, visit Mac help.
Using a memory card reader
You can put your camera’s optional memory card into a (separately purchased) memory
card reader. Some computers and HP Photosmart printers have built-in memory card
slots which act as a memory card reader.
For Windows computers:
1. Insert your camera’s memory card into the memory card reader (or into your
computer’s memory card slot).
2. Right-click My Computer on your desktop, then select Explore.
3. Expand the removable drive folder, expand the DCIM folder, then click on the folder
for your camera.
4. Select and copy all the images to a folder on your computer.
5. After verifying that the images were successfully transferred, return the memory card
to your camera.
For Macintosh computers:
1. Insert your camera’s memory card into the memory card reader (or into your
computer’s memory card slot).
2. Either the HP Photosmart Software, Image Capture, or iPhoto starts automatically
and guides you through the process of transferring images.
If no application starts automatically or if you want to copy the images manually, look on
the desktop for the disk drive icon for the memory card, then copy the images to your
local hard drive. For more information about how to copy files, visit Mac help.
Printing images from the camera
You can connect the camera to any PictBridge-certified printer to print still
images.
1. Check that the printer is turned on, there is paper in the printer, and
there are no printer error messages.
2. Verify that the camera's USB Configuration is set to Digital Camera (see USB
3. Connect the camera and printer using the
USB cable that came with your camera, then
turn on the camera.
4. When the camera is connected to the printer,
the Print Setup Menu displays on the
camera. To change the settings, use
on
the camera to select a menu option, then use
on the camera to change the setting.
5.
Press
to begin printing.
Note If you connect the camera to a non-
HP printer and encounter problems with printing, contact your printer
manufacturer. HP does not provide customer support for non-HP printers.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
19
Using the Setup Menu
5
The Setup Menu allows you to set preferences for the camera’s behavior.
1.
2.
While in Live View or Playback, press
Use
sub-menu.
, then use
to highlight
.
to highlight a menu option, then press
to display the menu option’s
3.
4.
Use
to highlight a setting, then press
.
To exit the Setup Menu, press
.
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
●
●
●
Low—For extending battery life.
Medium (Default)—For normal viewing conditions.
High—For very bright lighting conditions.
Camera Sounds—Turns the camera sounds (such as button presses and
shutter clicks) off and on.
On (Default), Off.
USB Configuration—Specifies how a computer recognizes the camera. See
●
Digital Camera (Default)—Recognizes the camera as a digital camera
using PTP (Picture Transfer Protocol).
●
Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass
Storage Device Class).
(Language)—Sets the language. See Choose the language
About...—Provides information about the camera, including copyright, serial
number, and firmware version.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
6
Use this section to find information on:
●
●
Resetting the camera
If your camera does not respond when you press buttons, reset the camera.
1. Turn off the camera.
2. Remove the memory card and batteries for at least 5 seconds.
3. Reinsert the batteries and close the Battery/Memory card door.
4. After verifying that the camera works without an optional memory card, reinsert the
memory card (if you were using one).
When the camera is reset, any images or video clips stored in memory are retained.
Problems and solutions
Use this information to find solutions to common issues you may have using your camera.
The camera does not turn on.
●
Install new or recharged batteries, ensuring that the batteries are inserted correctly
they are rechargeable Nickel Metal Hydride (NiMH) batteries.
●
●
remove the memory card and turn on the camera; if the camera turns on, format the
camera still does not turn on, format the memory card using a memory card reader,
or replace the memory card.
It takes the camera a long time to turn on.
●
Having a large number of files (over 300) stored on an optional memory card affects
the time it takes for the camera to turn on. Transfer stored files to your computer,
then format the memory card.
●
Using the camera under cold conditions slows camera response time.
I have to recharge the NiMH batteries frequently.
●
●
New batteries or batteries that have not been charged recently must be recharged
to reach full capacity.
●
●
If you have not used the batteries for two months or longer, recharge them.
If charging the batteries in the optional HP quick recharger does not work, replace
the batteries.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Chapter 6
The camera does not respond when I press a button.
●
●
Turn on the camera.
Most of the camera buttons do not respond when the camera is connected to a
computer.
●
●
●
●
Replace or recharge the batteries.
Check to see if the memory card is defective. If so, replace the memory card.
Format the internal memory and/or the memory card (see Install and format an
The camera does not take a picture when I press the Shutter button.
●
●
Press the Shutter button all the way down.
The memory card or internal memory may be full. Transfer images from the camera
to your computer, then format the internal memory or the memory card (see Install
The camera may be processing. Wait a few seconds for the camera to finish
processing the last image before taking another picture.
●
The Image Display is not working.
●
The Image Display may have timed out. Press any camera button to wake up the
camera.
●
Replace the batteries. If the Image Display still does not turn on, reset the camera
My image is blurry.
●
Hold the camera steady when pressing the Shutter button, use a tripod, or improve
lighting conditions.
●
Set the flash to
Auto Flash or Flash On and set the shooting mode to
Action.
My image is too bright.
●
●
●
Move back from the subject and use zoom.
My image is too dark.
●
●
●
Wait for natural lighting conditions to improve, use the flash (see Flash Setting
If the subject you are trying to capture is outside the flash range (see Flash working
longer exposure time, so use a tripod or hold the camera steady.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
My image is grainy.
●
●
If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
●
●
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory. If so,
The Power light is on but the Image Display is off, or the camera seems stuck and
won't operate.
●
●
Press Live View/Playback
to reactivate the Image Display.
The camera responds sluggishly when trying to review images.
cards.
Video recording terminates abruptly. The video is saved successfully, but it is
shorter than expected.
Replace your memory card with a faster card. Look for cards marked High Performance,
Pro, Ultra, or High Speed.
Video recording terminates abruptly and the video will not play back.
The camera gets warm (or even hot) to the touch.
This is normal. However, if anything seems out of the ordinary, turn off the camera and
allow the camera to cool. Then examine the camera and the batteries for signs of possible
damage.
For best image quality, turn off the camera when not using. Always store the camera in
a cool place.
My camera stalls when establishing a connection to the computer.
●
●
●
Ensure that the USB cable is properly connected to the camera and computer.
Try connecting the USB cable to another USB port on the computer.
Turn the camera off, then on again. If that does not fix the problem, reset the camera
●
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Chapter 6
I cannot transfer images from the camera to my computer.
●
●
I get an error message when transferring images to my computer.
Close the HP Photosmart Transfer Software, disconnect the camera from the USB cable
I am having a problem installing or using the HP Photosmart Software.
●
Make sure your computer meets the minimum system requirements (see Install the
●
How can I get professional-quality prints if I don’t have a photo printer?
●
Use the Buy prints online feature in the HP Photosmart Software (see the Help
feature in the HP Photosmart Software for details).
●
Transfer your images to an optional memory card and take the memory card to a
retail outlet for printing.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Product support
7
Use this section to find support information for your digital camera, including links to
helpful websites and an overview of the support process.
Helpful websites
Camera tips, product
registration, newsletter
subscriptions, driver and
software updates,
www.hp.com/photosmart (English only)
purchase HP supplies and
accessories
only)
software updates, support
information
Getting assistance
To get the best from your HP product, consult the following standard HP support
offerings:
1. Consult the product documentation.
–
–
Review the electronic Help section within the software.
where you purchased this camera. The HP Customer Care website is available to
all HP customers. The HP Customer Care website is the fastest source of up-to-date
product information and expert assistance, including:
–
–
–
–
Fast e-mail access to qualified online support specialists.
Software and driver updates for your camera.
Valuable product and troubleshooting information for technical issues.
Proactive product updates, support alerts, and HP newsletters (available when
you register your camera).
3. HP support by phone. Support options and fees vary by product, country/region, and
language. For a list of support conditions and phone numbers,
4. Post-warranty period. After the limited warranty period, help is available online
5. Extending or upgrading your warranty. If you would like to extend or upgrade your
camera's warranty, please contact the store where you bought the camera or check
6. If you already purchased an HP Care Pack Service, please check the support
conditions on your contract.
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
25
Managing batteries
A
Your camera uses two AA batteries, either Alkaline, Photo Lithium, or rechargeable Nickel Metal
Hydride (NiMH). Alkaline batteries provide far less battery life than either Photo Lithium or NiMH
batteries.
Top points about batteries
●
●
Fully charge NiMH batteries before using them for the first time.
The first several times you recharge NiMH batteries, they may not provide the number of shots
per charge that you expect. Their performance will improve after the batteries have been
charged, then discharged completely four or five times. You can use the camera normally to
discharge the batteries during this conditioning period.
●
batteries are inserted improperly, the compartment door may close but the camera will not
operate.
●
●
If you do not intend to use your camera for more than two months, remove the batteries from
the camera.
The performance of all batteries will decrease as the temperature drops. To improve battery
performance, keep the camera or batteries stored in a warm inside pocket when in a cold
environment.
Extending battery life
To conserve battery power, the Image Display turns off after 30 seconds. Pressing any button wakes
up the camera. After five minutes of inactivity, the camera turns off.
To further extend battery life:
●
●
Safety precautions for using batteries
●
●
●
Always use two identical batteries of the same chemistry, brand, and age.
Do not place batteries in fire or heat them. Always store charged batteries in a cool location.
Do not connect the positive and negative terminals of the battery to each other with any metal
object.
●
Do not carry or store batteries with metal objects. Do not drop batteries into a change-filled
pocket.
●
●
●
●
●
Do not pierce batteries or subject them to strong impacts or shocks.
Do not solder directly onto batteries.
Do not allow batteries to get wet.
Do not disassemble or modify batteries.
Immediately discontinue use of a battery if, while using, charging, or storing the battery, the
battery emits an unusual smell, feels excessively hot (note that it is normal for the battery to
feel warm), changes color or shape, or appears abnormal in any other way.
In the event batteries leak and the fluid gets into one’s eye, do not rub the eye. Rinse well with
water and immediately seek medical care. If left untreated, the battery fluid could cause
damage to the eye.
●
Caution Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Power indicators
When the batteries are low, one of the following icons appears in the Image Display. If no battery
icon appears in Live View or Playback, the batteries have sufficient power to function normally.
Icon
Description
Battery level is low. Camera will soon power down.
Battery is depleted. Camera will power down.
Blinking
Note If the camera is without batteries for a prolonged period, the clock may be reset and
you may be prompted to update it the next time you power on the camera.
Number of shots per battery type
The following table shows the minimum, maximum, and average number of shots that may be
obtained using Alkaline, Photo Lithium, and rechargeable NiMH batteries.
Number of Shots
Battery Type
Alkaline
Minimum
80
Maximum
160
Average
120
CIPA
110
NiMH
140
230
200
200
Photo Lithium
300
600
375
375
For Minimum, Maximum, and Average numbers, four pictures are taken per session with at least a
5 minute break between sessions. In addition:
●
●
●
●
The minimum number of shots is obtained with extensive use of Live View (30 seconds per
picture), Playback (15 seconds per picture), and Flash On.
The maximum number of shots is obtained with minimal use of Live View (10 seconds per
picture) and Playback (4 seconds per picture). Flash is used on 25% of the shots.
The average number of shots is obtained with Live View used for 15 seconds per picture and
Playback used for 8 seconds per picture. Flash is used on 50% of the shots.
The CIPA number is obtained using the standards established by the Camera and Imaging
Products Association.
Battery performance
The following table shows how Alkaline, Photo Lithium, and rechargeable NiMH batteries perform
in different types of use scenarios:
Type of Use
Alkaline
Poor
Photo
Lithium
NiMH
Good
Fair
Most economical if you take more than 30 pictures per
month
Fair
Most economical if you take fewer than 30 pictures per
month
Fair
Good
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
27
Appendix A
(continued)
Type of Use
Alkaline
Photo
NiMH
Lithium
Heavy use of flash, frequent pictures
Heavy use of video
Poor
Poor
Poor
Poor
Poor
Fair
Good
Good
Good
Good
Good
Good
No
Good
Good
Good
Fair
Heavy use of Live View
Overall battery life
Low temperature/winter use
Infrequent use
Fair
Fair
Want to recharge battery
No
Good
Recharging NiMH batteries
You can recharge optional NiMH batteries with an optional HP quick recharger. For information
about recharging NiMH batteries, as well as safety precautions when recharging, see the user's
manual that came with your HP quick recharger.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
B
Resolution
Still pictures:
●
●
6.0MP (2848 by 2136) effective pixel count
6.4MP (2934 by 2171) total pixel count
Video clips (QVGA):
320 by 240 total pixel count, 30 frames/sec
Sensor
Diagonal 7.26 mm (1/2.5-inch, 4:3 format) CCD
Color depth
30 bit (10 bits by 3 colors). 30 bit images are transformed into an
optimized 24 bit image and stored in the JPEG format. This
transformation results in no discernible change to color or detail in the
stored image, and allows the image to be read by computers.
Lens
Fixed focal length, f/3.5
None
Viewfinder
Zoom
5x digital zoom
Fixed focus
Focus
●
●
Macro—600mm to 1m
Normal—1m to infinity
Shutter speed
Built-in flash
1/1000 to 2 seconds
Yes, 6-second typical recharge time
Flash working range Maximum with ISO Speed set to Auto: 5 m (16.5 ft)
Image Display
5.08 cm (2.0 in) color LTPS TFT LCD with backlight, 153,600 pixels (640
by 240) total pixel count
Storage
●
32MB internal flash memory, not all of which is available for storing
32MB SDRAM
●
●
●
Slot for memory card.
This camera supports standard and high speed, HP-branded
Secure Digital (SD) memory cards, 16MB to 1GB.
The number of images or video clips that can be saved in memory
depends on the Image Quality settings (see Memory capacity
●
Compression format
●
●
●
JPEG (EXIF) for still images
EXIF2.2 for still images with embedded audio
Motion JPEG for video clips
Interfaces
Standards
USB Mini B connector, USB 2.0 full speed
●
●
●
●
●
PTP and MSDC
NTSC/PAL
JPEG
Motion JPEG
DPOF 1.1
HP Photosmart E427 Digital Camera
Download from Www.Somanuals.com. All Manuals Search And Download.
29
Appendix B
(continued)
●
●
●
EXIF 2.2
DCF 1.0
DPS
External body
dimensions
Measurements with camera off and lens retracted (width, depth, height):
●
●
95.6 mm (W) by 24.2 mm (D) by 55.2 mm (H)
3.76 in (W) by .95 in (D) by 2.17 in (H)
Weight
Power
105 grams (3.7 ounces) without batteries
Typical power usage: 2.5 Watts (with Image Display on). 5 Watts peak
power usage.
Power sources include two AA non-rechargeable Alkaline or Photo
Lithium batteries or two AA rechargeable NiMH batteries.
Temperature range
Operational:
0° to 50° C (32° to 122° F) at 15% to 85% relative humidity
Storage:
–30° to 65° C (–22° to 149° F) at 15% to 90% relative humidity
Memory capacity
Not all 32MB of internal memory is available for storing images, because some memory is used for
internal camera operations. The actual file sizes and number of still images that can be stored in
internal memory or on a memory card will vary depending on the content of each still image and the
length of any associated audio clip.
Image quality
The following table lists the approximate number and average size of still images that can be stored
in internal memory when the camera is set to different Image Quality settings (see Image
6MP Best
Normal (6MP)
4MP
8 images (1.2MB each)
10 images (1.0MB each)
18 images (600KB each)
21 images (500KB each)
95 images (120KB each)
2MP
VGA
Note The values shown are for images without audio clips. Thirty seconds of audio adds
470KB to the file size.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
card door
Menu/OK button
menus
A
arrow buttons
focus range settings
Macro 11
Capture 12
Setup 20
assistance 25
Normal 11
microphone
format memory card
B
G
N
batteries
conserving 26
install
number of
performance 27
H
battery door
I
O
blinking lights on camera
Image Display
on/off
images
C
P
camera
deleting 16
magnifying 17
Playback 15
power
dimensions 30
parts 5, 6
specifications 29
turn on/off
weight 30
indicators 27
light
usage 30
install memory card
install software
interfaces 29
R
D
record
resolution 29
Delete button
dimensions 30
L
Language 7, 20
LEDs
lights on camera
Live View/Playback button
S
safety precautions for
batteries 26
selecting images for printing
E
M
memory
Self-Timer light
set date and time
F
F-number 29
flash
capacity 30
HP Photosmart E427 Digital Camera
31
Download from Www.Somanuals.com. All Manuals Search And Download.
|