HP Photosmart
E330 series
Digital Camera
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Camera Setup Menu .............................................................................................25
Index..............................................................................................................................................38
2
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Getting started
Use this section to get familiar with camera controls, set up your digital camera for use,
and begin taking pictures.
Camera top and back
1
2
3
4
5 6
7
8
9
11
10
1
2
3
4
5
Power light.
button.
Shutter button.
Viewfinder.
Delete button—Accesses the
6
7
8
Flash button— Accesses the flash settings while in
selector—Switches between
and
Picture Capture, press
buttons—Scroll through menus and images and access digital zoom. While
in
/
/
9
button—Displays camera menus, selects options, and confirms actions.
10
Back button—Returns you to the previous menu or view. Press and hold to back out of
all menus.
11
Image Display.
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Chapter 1
Camera front, side, and bottom
1
2
3
6
5
4
1
2
3
4
5
6
Flash.
Viewfinder.
Tripod mount.
Dock/USB connector.
Battery/Memory Card door.
Before taking pictures
Complete the following procedures before taking pictures or recording video clips.
Install the batteries
1. Open the Battery/Memory Card door by sliding
the latch as indicated on the Battery/Memory
Card door.
2. Insert the two AA batteries.
3. Close the Battery/Memory Card door.
NOTE: If using rechargeable NiMH batteries,
fully charge the batteries before using them the
first time (see “Recharging NiMH batteries”
on page 35). Turn off the camera before
removing the batteries.
Turn on the camera
To turn on the camera, press the
button.
4
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Choose the language
Use
to choose the language you want, then
press
.
To change the language later, use the Camera
Set the region
Along with the language setting, the region setting
determines the default date format.
Use
.
to choose the region you want, then press
Set the date and time
Accurately setting the date and time will help you locate images once you have transferred
them to your computer, and will ensure that images are accurately marked if you use the
1.
Use
to adjust the highlighted value.
2. Use
to move to the other selections and
repeat Step 1 until the date and time are set
correctly.
3.
Press
when the date, time, and format
settings are correct, then press
confirm.
again to
To change the date and time later, use the Camera
Before taking pictures
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Chapter 1
Install and format an optional memory card
This camera supports standard, high speed, and high capacity Secure Digital (SD and
SDHC) memory cards, 32MB to 8GB.
1. Turn off the camera and open the Battery/
Memory Card door.
2. Insert the memory card in the smaller slot
as shown. Make sure the memory card
snaps into place.
3. Close the Battery/Memory Card door and
turn on the camera.
NOTE: When you turn on your camera
with a memory card installed, the camera
indicates the number of images you can
store on the memory card at the current
Image Quality setting. This camera
supports storing a maximum of 2000
images on a memory card.
Always format new memory cards before first use. Formatting removes all images from
the memory card, so make sure to transfer existing images before formatting (see
1. With the camera turned on, slide
to
.
2.
3.
4.
Press
Use
.
to select Format Card, then press
.
Use
to select Yes, then press
to format the card.
NOTE: Once you install a memory card, all new images and video clips are stored
on the card, rather than in internal memory. To use internal memory and view images
stored there, turn off the camera then remove the memory card. To transfer images
from internal memory to an optional memory card, see Move Images to Card
Install the software
The HP Photosmart Software provides features for transferring images and video clips
to your computer, as well as features for modifying stored images (remove red eyes,
rotate, crop, resize, and more).
To install the HP Photosmart Software, your computer must meet the system
requirements as stated on the camera packaging.
If you have trouble installing or using the HP Photosmart Software, see the Hewlett-
issues are often fixed with new releases of firmware. To optimize your digital photography
experience, periodically check this website for updates to your camera's firmware,
software, and drivers.
To learn about Windows Vista support for your camera, see www.hp.com/go/
windowsvista (English only).
6
Getting started
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows:
1. Close all programs and temporarily disable any virus protection software.
2. Insert the HP Photosmart Software CD into the CD drive and follow the on-screen
instructions. If the installation screen does not appear, click Start, click Run, type D:
\Setup.exe, where D is the letter of your CD drive, then click OK.
3. When the software has finished installing, re-enable virus protection software.
Macintosh:
1. Insert the HP Photosmart Software CD into the CD drive.
2. Double-click the CD icon on the computer desktop.
3. Double-click the installer icon, then follow the on-screen instructions.
Once installation is complete and you have restarted your computer, System
Preferences automatically opens to the HP Photosmart Camera settings. You may
change settings so the HP Photosmart Software starts automatically when you connect
your camera to your Macintosh (click the help button on the HP Photosmart Camera
settings dialog for more information).
Using your camera
Now that you’ve completed setup, you can take and review pictures and video clips.
video clips
For information on setting picture capture and
video record settings
clips on the camera
For information on transferring images from
your camera to a computer
For information on printing images
TIP: To switch between
Picture Capture and
Playback, slide
to the
desired option.
Using your camera
Download from Www.Somanuals.com. All Manuals Search And Download.
7
2 Taking pictures and recording
video clips
You can take pictures and record video clips when you are in
Picture Capture. Slide
to
to take pictures or record video clips. The Image Display resembles the
following:
1
Picture Capture indicator.
2
3
12
Pictures remaining count.
4
Memory card indicator.
Taking pictures
You can take a picture when the camera is set to
Picture Capture.
1. Slide
to
.
2. Frame the subject for your picture in the Image Display
or the viewfinder.
3. Press the Shutter button all the way down to take the
picture.
8
Taking pictures and recording video clips
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording video clips
Your camera allows you to record video clips without sound.
1.
2.
Slide
to
, then press
.
In the
Picture Capture Menu, use
to highlight
Shooting Mode, then press
In the Shooting Mode menu, use
Video, press , then hold down
disappears.
.
3.
to highlight
until the menu
4. Frame the subject in the Image Display or the viewfinder.
5. Press the Shutter button all the way down and release to
begin recording video.
6. To stop recording video, press and release the Shutter button again.
Instant Review
After you have taken a picture or recorded a video clip, the camera displays it briefly in
Instant Review. If you want to delete the image or video clip, press , select This
Image from the
Delete menu, then press
.
Digital zoom
In digital zoom, the Image Display shows a yellow frame around the scene and the image
quality setting (MP value). As you zoom in, the scene expands to show what the camera
will capture, and the MP value decreases to indicate the resolution at which the scene
will be captured.
When capturing images using digital zoom, make sure that the MP value on the Image
Display is appropriate for the size at which you want to print the captured image. For MP
TIP: The more you zoom in on the subject of your picture, the more small movements
of the camera are magnified (this is called camera shake). To reduce potential blur
caused by these movements, hold the camera still, add more light to the scene, or
steady the camera by holding it closer to your body or against a steady object, or by
setting it on a tripod or stable surface.
To use digital zoom:
1. Slide
2. Press and hold until the image you want fills the yellow frame. If you zoom too far,
press
to
.
.
NOTE: Digital zoom is not available when recording video clips.
Recording video clips
Download from Www.Somanuals.com. All Manuals Search And Download.
9
3 Setting options for taking
pictures and recording video
clips
Your camera's default settings work well for most shooting situations. For some
situations, however, the features described in this chapter can improve the pictures you
take and the video clips you record. In addition to setting features that optimize the camera
for lighting and motion, you can also set the camera to take a series of pictures rapidly
or take images 10 seconds after you press the Shutter button, giving you time to place
yourself in the image.
Setting the flash
To select a flash setting, press while in
desired flash mode, then press . To exit without changing the flash setting,
press
Picture Capture, use
to highlight the
.
Auto Flash (Default)—The camera uses the flash if necessary.
Red-Eye—The camera uses the flash with red-eye reduction, if necessary, to minimize
the possibility of human eyes appearing red in the final image. For information about
Flash On—The camera always uses flash. If the light is behind your subject, use this
setting to increase the light on the front of your subject.
Flash Off—The camera does not use flash. Use this setting to capture poorly lit subjects
beyond the flash range or to capture scenes with the existing light.
The flash setting remains in effect until it is changed again, or you turn off the camera.
NOTE: The flash is set to
Flash Off in
Landscape,
Sunset, and
Burst. The
Theatre shooting modes, and while recording video clips or using
flash is set to
Red-Eye in
Night Portrait shooting mode.
Flash Setting—Red-Eye
The red-eye phenomenon is caused when light from the flash reflects off the subjects'
eyes, which can make human eyes appear red in the captured image. Using Red-
Eye causes the camera to flash quickly up to three times to shrink the subject's pupils
(reducing the effect of the red-eye phenomenon) before using the main flash and
capturing the image. Since it takes longer to take a picture using this setting, make sure
your subjects wait for the additional flashes.
10
Setting options for taking pictures and recording video clips
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Picture Capture Menu
The
Picture Capture Menu allows you to adjust camera settings that affect the
characteristics of the pictures you capture.
1.
2.
3.
Slide
Use
Use
to
, then press
.
to highlight an option, then press
to display the option’s menu.
to change the setting or press
to highlight a setting, then press
to
exit without changing the setting.
4. To exit the menu, hold down
until the menu disappears.
For information about an option, use
to highlight Help... in the option's menu,
then press
.
Unless otherwise noted, the setting remains in effect until you turn off the camera. The
next time you turn on the camera, the settings reset to their defaults.
Shooting Mode—For selecting a predefined setting optimized for particular types of
scenes or shooting situations.
•
Auto Mode (Default)—For taking good shots quickly, when you do not have
time to select a special shooting mode.
•
Theatre—For capturing images at school programs, concerts, or indoor sporting
events without using flash.
•
•
•
Landscape—For scenes with deep perspective, such as mountain scenes.
Portrait—For pictures that have one or more people as their primary subject.
Action—For capturing sporting events, moving cars, or any scene where you
want to stop the action.
•
Night Portrait—For capturing images of people at night. This mode uses the
flash and a long exposure. As a result, you must set the camera on a tripod or stable
surface.
•
•
Sunset—For capturing outdoor scenes at sunset.
Video—For recording video clips. For information about recording video clips,
Image Quality—Sets resolution and compression for pictures only. The greater the
number, the higher the resolution. The setting remains in effect until it is changed, even
when you turn off the camera.
5MP Best—For enlarging or printing images greater than 28 x 36 cm (11 by 14 in).
Normal (5MP) (Default)—For printing images up to 28 x 36 cm (11 by 14 in).
3MP—For printing images up to 20 x 25 cm (8 by 10 in).
•
•
•
•
•
1MP—For printing images up to 10 x 15 cm (4 by 6 in).
VGA—For sending images via e-mail or posting them to the Internet.
Color—Sets the color in which pictures will be captured.
Full Color (Default), Black & White, Sepia
Using the Picture Capture Menu
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
(continued)
Date & Time Imprint—Imprints date in lower left corner of pictures only. The setting
remains in effect until it is changed, even when you turn off the camera.
Off (Default)—No date or time imprinted on the image.
Date Only—Date permanently imprinted.
•
•
•
Date & Time—Date and time permanently imprinted.
Camera Setup...—Displays the
Camera Setup Menu for setting camera behavior
Camera Help...—Displays a list of help topics for commonly used features.
NOTE: Some menu options are not available in certain shooting modes.
Using the Self-Timer setting
The
Self-Timer allows you to take an image or video clip 10 seconds after pressing
the Shutter button.
1. If you want to record a video clip or change the shooting mode, access the
Picture
Capture Menu, use
to highlight
Shooting Mode, press
, highlight either
Video or another shooting mode, press
Picture Capture Menu.
, then press
to return to the
2.
In the
highlight On, press
3. Set the camera on a tripod or stable surface.
Picture Capture Menu, use
to highlight
until the menu disappears.
Self-Timer, press
,
, then hold down
4. Frame the subject in the Image Display or the viewfinder.
5. Press the Shutter button all the way down. The camera begins the 10-second
countdown, then takes the picture or begins recording the video clip.
6. If you are recording a video clip, press the Shutter button to stop recording.
The
Self-Timer setting resets to Off after the image is taken.
Using the Burst setting
Burst allows you to take up to two pictures as quickly as possible when you press
and hold the Shutter button all the way down.
1.
While in the
Picture Capture Menu, use
, then hold down
to highlight
until the menu disappears.
Burst , press
, highlight On, press
2. Frame the subject, then press the Shutter button all the way down and hold it. The
camera takes up to two pictures as quickly as possible until you release the
Shutter button or the camera runs out of memory.
The Image Display remains off during the burst capture. After the burst images have been
The
Burst setting remains in effect until it is changed again, or until it resets to the
default Off setting when you turn off the camera.
12
Setting options for taking pictures and recording video clips
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Reviewing images and video
clips
You can review and manipulate images and video clips in
here.
Playback as described
1. Slide
2. Use
Press
to
to scroll through your images and video clips.
to view video clips; press to pause a clip. When paused, use
to resume playing the video.
Playback, the Image Display also indicates additional information about each
.
to scroll
through the individual frames; press
During
image or video clip.
1
2
3
Playback indicator.
Memory card indicator.
4
5
6
7
8
1 of 30
Number of this image or video clip out of the total number of stored
images and video clips.
Image marked for printing via an online printing service (see “Buying
Number of electronic Photosmart Share destinations (see “Sharing
1
3
Number of copies to print (see “Marking images for printing”
Reviewing images and video clips
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Deleting images
To delete a displayed image during
Playback:
1.
2.
Press
Use
.
to select an option, then press
.
•
•
This Image—Deletes the image or video clip.
All Except Favorites—Deletes all images except those tagged as Favorites.
This menu option only appears if you have images tagged as Favorites (see
•
•
All Images (in Memory/on Card)—Deletes all stored images and video clips.
Format (Memory/Card)—Deletes all stored files, then formats the internal
memory or memory card.
Using the Playback Menu
1.
2.
3.
While in
Use
Playback, press
.
to highlight an option.
Use
to select an image or video clip, press
, and follow the on-screen
instructions.
4. To exit the selected
5. To exit the Playback Menu, hold
Playback option, press
.
until the menu disappears.
Remove Red Eyes—Allows you to remove red eyes in images containing human
Rotate—Rotates images in 90-degree increments.
Use
to rotate the image clockwise or counter-clockwise in 90-degree increments.
to save the image in the new orientation.
Press
View Thumbnails—Allows you to view multiple images per screen on the Image Display
Photosmart Express...—Allows you to mark images for printing, sharing, and buying
View Slideshow—Allows you to create and view slideshows of your images and video
Move Images to Card—Moves images from internal memory to memory card. Available
only if there are images in internal memory and a memory card is inserted.
To move images, select this option and follow the on-screen prompts.
Camera Setup...—Displays the
Camera Setup Menu for setting camera behavior
Camera Help...—Displays a list of help topics for commonly used features.
14
Reviewing images and video clips
Download from Www.Somanuals.com. All Manuals Search And Download.
Removing red eyes
When you select
Remove Red Eyes, the camera processes the current picture to
remove red eyes from the subjects.
Remove Red Eyes is only available for pictures taken with a flash.
The red-eye removal process takes a few seconds, after which the magnified image
displays with green boxes around corrected areas, along with the
Remove Red
Eyes menu:
•
Save Changes (Default)—Saves a copy of the original image with the changes and
returns to the Playback Menu.
•
View Changes—Displays a magnified view of the image with green boxes around
the corrected areas.
To exit the
Remove Red Eyes menu without saving changes, press
.
Magnifying images
This feature is for viewing purposes only; it does not permanently alter the image.
1.
From the
magnified 2x; press
Playback Menu, select Magnify. The currently displayed image is
to increase magnification to 4x.
to pan around the magnified
2.
Use
image.
and
to return to the
3. Press
Playback Menu.
Viewing thumbnails
1.
From the
Playback Menu, select
and to scroll through the
View Thumbnails.
2.
Use
thumbnails.
3.
Press
to view the highlighted image on the
Image Display.
Tagging images as Favorites
Tagging an image as a Favorite allows you to quickly select the group of images tagged
as Favorites for printing or viewing as a group.
NOTE: You can tag up to 200 images as Favorites.
Using the Playback Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Chapter 4
1. While in
2. From the
Playback, use
Playback Menu, select
to display an image you want to tag as a Favorite.
Favorites, then select This Image. To untag
the image as a Favorite, press
.
3. For each additional image you want to tag as a Favorite, use
to display the image,
then repeat Step 2.
4. To exit the
Playback Menu, hold
until the menu disappears.
If you have the HP Photosmart Software installed on your computer, tagged images retain
the tag when transferred to your computer (see “Transferring and printing images”
Viewing slideshows
Select View Slideshow to configure and run a slideshow of images and/or video clips
on the camera Image Display.
From the View Slideshow menu, use
to select a slideshow option.
•
•
•
Images—Plays the specified images: All (default), Favorites, Pictures Only,
Videos Only.
Interval—Sets the amount of time each image is shown: 2 secs, 5 secs (Default),
10 secs, 15 secs, 60 secs.
Loop—Specifies how often the slideshow repeats: Once (Default), 2x, 3x,
Continuous.
16
Reviewing images and video clips
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Transferring and printing images
Regularly transferring images to your computer and deleting them from the memory card
will reduce the time it takes to turn on your camera, to review images, and to transfer
images. You can transfer pictures and video clips with or without the HP Photosmart
Software that came with your camera. However, the HP Photosmart Software has several
features for transferring and managing your images and also guides you through the
transfer process.
NOTE: Transferring a large number of high-resolution images from a memory card
to your computer may take up to two hours. Even if your Image Display turns off during
the transfer process or it appears that nothing is happening on the computer, do not
disconnect your camera from your computer until your computer indicates that image
transfer is complete. When transferring a large number of images, be sure your
camera batteries are fully charged or use an optional HP Photosmart dock or memory
card reader.
Transferring images with HP Photosmart Software
use this method to transfer images and video clips to your computer.
When you connect your camera to a computer with the HP Photosmart Software installed:
•
on page 15), the tags are transferred with the images to your computer.
If you have marked images for printing (see “Marking images for printing”
on page 21) and the computer is connected to a printer, the marked images are
automatically printed.
•
•
•
•
computer is connected to the Internet, the selected images are automatically sent to
their destinations.
If you have marked images to buy as prints (see “Buying prints online”
on page 23) and the computer is connected to the Internet, you can follow the
instructions on the computer screen to buy prints of those images you selected.
You can transfer the images on the camera to the computer by following the
instructions on the computer screen.
TIP: You can also perform these tasks using an optional HP Photosmart dock (see
the documentation that came with your dock).
To transfer images using the HP Photosmart software:
HP Photosmart Express” on page 21), verify that the computer is connected to a
printer and/or the Internet.
2. Turn off the camera.
Transferring and printing images
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Chapter 5
3. Connect the camera and computer using the USB
cable that came with your camera.
4. Turn on the camera. When the Image Display
indicates that the camera is connected to the
computer, follow the instructions on the computer
screen. For more information, see the Help feature
in the HP Photosmart Software.
NOTE: If the camera does not successfully
connect to the computer, see “My camera stalls
After you have transferred the images, you can then use the HP Photosmart Software to
edit, print, or send the images from your computer.
Transferring images without HP Photosmart Software
If you do not install the HP Photosmart Software:
•
You cannot use the Share features or
Buy Prints Online on the camera's
•
•
Images marked for printing do not automatically print when the camera is connected
to the computer.
Favorites tags do not transfer to the computer.
However, you can still transfer images and video clips to your computer by:
•
Connecting your camera directly to the computer (see “Connecting to the
•
Connecting to the computer
1. Turn off the camera, connect the camera and computer using the USB cable that
came with your camera, then turn on the camera. Your computer's provided image
transfer software should start. Follow the on-screen instructions to transfer your
images.
2. When you have finished transferring images, disconnect the camera from the
computer.
If you encounter problems, set the camera’s
USB Configuration to Disk Drive
reconnect to your computer.
NOTE: On Macintosh computers, if you set the camera to Disk Drive and neither
Image Capture nor iPhoto starts automatically, look on the desktop for a disk drive
icon labeled with your camera model number and copy the images manually. For
more information about how to copy files, visit Mac help.
18
Transferring and printing images
Download from Www.Somanuals.com. All Manuals Search And Download.
Using a memory card reader
You can put your camera’s optional memory card into a (separately purchased) memory
card reader. Some computers and HP Photosmart printers have built-in memory card
slots which act as a memory card reader.
1. Insert your camera’s memory card into the memory card reader (or into your
computer’s memory card slot, if your computer has one).
2. Your computer's provided image transfer software starts automatically and guides
you through the process of transferring images.
3. After verifying that the images were successfully transferred, return the memory card
to your camera.
If no application starts automatically or if you want to copy the images manually, look for
the disk drive for the memory card, then copy the images to your local hard drive. For
more information about how to copy files, refer to your computer's help.
Printing images directly to a printer
You can print images directly from the camera to any PictBridge-certified
printer. For information about printing images from your computer, see
NOTE: You cannot print video clips using the method described in this section. You
can, however, print a frame from a video clip using the HP Photosmart Software. For
more information, see Help in the HP Photosmart Software.
1. Check that the printer is turned on, there is paper in the printer, and there are no
printer error messages.
2. Turn off the camera, connect the camera
and printer using the USB cable that came
with your camera, then turn on the camera.
3. If the Print marked pictures? screen is
displayed on the camera's Image Display,
do one of the following:
•
If you want to print the pictures you
marked for printing (see “Marking
highlight Yes, press
, then follow the
on-camera instructions to select print options and print the marked pictures.
NOTE: After the printer prints the marked images, the Image Display on the
camera shows an image. You can then select individual images to print by
following the remaining steps in this procedure.
•
If you want to select individual images to print, highlight No, then press
.
Printing images directly to a printer
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
4. When the Image Display on the camera shows an image:
•
If you want to print one or more images, use
print, use
Options menu, highlight Print This Image Now, and press
If you want to print a group of images or modify the printer settings, press
highlight Print Menu..., then press again. Highlight the option you want.
Printer Settings—Specifies paper size, print size and quality, and borderless
printing. Use to select a print option and use to modify the selected
print option. When you are done specifying print options, press
to display an image you want to
to specify the number of copies, then press
. In the Print
.
•
,
•
•
.
Print All—Prints one copy of each image. Press
and follow the on-camera
instructions to begin printing.
•
•
Print Index—Prints all images as thumbnails. Press
to begin printing.
Print Favorites—Prints one copy of each image tagged as a Favorite. Press
to begin printing. This option is available only if you have tagged at least
Cancel Printing—Stops the printing of any images that have not yet printed.
•
Press
, highlight Yes, then press
.
5. After the printer has printed all the images you selected, disconnect the camera from
the printer.
NOTE: If you connect the camera to a non-HP printer and encounter problems with
printing, contact your printer manufacturer. HP does not provide customer support for
non-HP printers.
20
Transferring and printing images
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Using HP Photosmart Express
With HP Photosmart Express, you can select pictures in your camera to print
images” on page 23) the next time you connect the camera to your computer or printer.
You must have the HP Photosmart Software installed on your computer to use some
features in the
Photosmart Express Menu. For information about installing this
NOTE: Available online services vary by country or region.
Using the Photosmart Express Menu
To display the
Photosmart Express Menu:
1.
2.
3.
Slide
Use
Use
to
and press
.
to highlight
Photosmart Express..., then press
.
to highlight a menu option, then press
.
Share—Allows you to add custom online destinations and share images to one or more
Buy Prints Online—Specifies images you want printed by an online printing service.
NOTE: The features in the
Photosmart Express Menu are available only for
pictures. They are not available for video clips.
Marking images for printing
Marked images are automatically printed when you connect the camera to a PictBridge-
certified printer or a computer with the HP Photosmart Software installed. You can mark
Using HP Photosmart Express
Download from Www.Somanuals.com. All Manuals Search And Download.
21
Chapter 6
1.
While in the
press
Photosmart Express Menu, use
to highlight
Print, then
. This option is
until the menu
.
2. In the
Print menu, highlight an option, then
press
.
•
This Image—Marks the image currently
displayed. You can scroll to a different image
using
All Favorites...—Displays the Print All
Favorites entry. Press . This option is
.
•
available only if you have tagged more than
•
All Images...—Displays the Print All Images entry. Press
available only if you have more than one image in the camera.
3. If you want to print more than one copy,
highlight Change Number of Copies, then press
. In the
number of copies, use
of copies to print, then press
4. From the main Print menu, you can mark
additional images for printing, using to display
an image, highlighting This Image in the
Print menu, pressing , then repeating
Step 3.
Print menu for changing the
to specify the number
.
5. When you are done marking images for printing, hold down
disappears.
printer” on page 19. To print them from a computer connected to a printer, see
22
Using HP Photosmart Express
Download from Www.Somanuals.com. All Manuals Search And Download.
Buying prints online
You can mark images you want to order as prints. The next time you connect the camera
to a computer with the HP Photosmart Software installed, you can order prints of the
marked images online.
1.
While in the
Online, then press
In the Buy Prints Online menu, highlight an option, then press
Photosmart Express Menu, use
to highlight
Buy Prints
.
2.
.
•
This Image—Marks the image currently displayed. You can scroll to a different
image using
All Favorites...—Displays the Buy Prints of All Favorites entry. Press
.
•
, then
press . This option is available only if you have tagged more than one image
•
All Images...—Displays the Buy Prints of All Images entry. Press
, then
press . This option is available only if you have more than one image in the
camera.
3.
To mark additional images, use
to display an image, press
, then repeat Step 2.
4. When you are done marking images for which you want to buy prints, hold down
until the menu disappears.
Sharing images
You can customize the Share menu to include e-mail addresses, group distribution
lists, or other online services. You can then select images to send to these destinations.
Setting up online destinations in the camera
You can specify up to 34 custom destinations (such as individual e-mail addresses or
group distribution lists) in the
1. Verify that your computer is connected to the Internet.
2.
to highlight Share, then
Photosmart Express Menu.
While in the
Photosmart Express Menu, use
press
press
. If you have already created destinations, highlight Share Menu Setup and
again.
3. Connect the camera to your computer. Follow the on-
screen instructions to set up destinations in your
camera.
4. Turn off the camera and disconnect the camera from
the computer. Turn on the camera, access the
Photosmart Express Menu, then highlight
Share and press
to verify that the new
destinations are now in the camera.
Buying prints online
Download from Www.Somanuals.com. All Manuals Search And Download.
23
Chapter 6
Sending images to online destinations
After you have set up online destinations in the camera, you can mark images to be sent
to these custom destinations the next time you connect your camera to your computer.
1.
While in the
press
2. In the Share menu, highlight an option, then
press
Photosmart Express Menu, use
to highlight Share, then
.
.
•
Custom Destinations—Selects the
destination to send the image displayed in the
background. There may be multiple
destinations depending on the number of
them you created (see “Setting up online
can scroll to a different image using
All Favorites...—Displays a list of destinations. Highlight each destination to
which you want to send all Favorites, pressing to select each destination.
After selecting destinations, press . This option is available only if you have
.
•
•
All Images...—Displays a list of destinations. Highlight each destination to which
you want to send all images, pressing
to select each destination. After
selecting destinations, press . This option is available only if you have more
than one image in the camera.
3. To select additional images to share, use
to display an image, then repeat Step 2.
4. When you are done marking images to share, hold down
until the menu
disappears.
24
Using HP Photosmart Express
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Using the Camera Setup Menu
The Camera Setup Menu allows you to set preferences for the camera’s behavior.
The Camera Setup Menu is available from the
Picture Capture and
Playback menus.
1.
2.
While in the
Picture Capture or
Playback menu, use to highlight
Camera Setup..., then press
.
Use
to highlight a menu option, then press
to display the menu option’s
until the menu disappears.
menu.
3.
4.
Use
to highlight a setting, then press
.
To exit the Camera Setup Menu, hold down
Settings you specify remain until you change them.
Display Brightness—Adjusts the brightness of the Image Display.
Low—For extending battery life.
•
•
•
Medium (Default)—For normal viewing conditions.
High—For very bright lighting conditions.
Camera Sounds—Turns the camera sounds (such as button presses and shutter clicks)
off and on.
On (Default), Off.
USB Configuration—Specifies how a computer recognizes the camera. See
Digital Camera (Default)—Recognizes the camera as a digital camera using PTP
(Picture Transfer Protocol).
•
Disk Drive—Recognizes the camera as a disk drive using MSDC (Mass Storage
Device Class).
•
(Language)—Sets the language. See “Choose the language”
Using the Camera Setup Menu
Download from Www.Somanuals.com. All Manuals Search And Download.
25
8 Troubleshooting
Use this section to find information on:
•
•
Resetting the camera
If your camera does not respond when you press buttons, reset the camera.
1. Turn off the camera.
2. Remove the memory card and batteries for at least 5 seconds.
3. Reinsert the batteries and close the Battery/Memory Card door.
4. Turn on the camera. On successful reset, you may be prompted to set the date and
5. Verify that the camera works without an optional memory card, turn off the camera,
then reinstall the card.
When the camera is reset, any images or video clips stored in memory are retained.
Problems and solutions
Use this information to find solutions to common issues you may have using your camera.
NOTE: Known issues are often fixed with new releases of firmware. To optimize your
digital photography experience, periodically check the Hewlett-Packard Technical
software, and drivers.
How can I get professional-quality prints if I don’t have a photo printer?
Use the
Buy Prints Online feature on the
Photosmart Express Menu (see
The camera does not turn on.
•
Install new or recharged batteries, ensuring that the batteries are inserted correctly
they are rechargeable Nickel Metal Hydride (NiMH) batteries.
•
•
remove the memory card and turn on the camera; if the camera turns on, format the
camera still does not turn on, format the memory card using a memory card reader,
or replace the memory card.
26
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
I have to recharge the NiMH batteries frequently.
•
New batteries or batteries that have not been charged recently must be recharged to
reach full capacity.
•
•
If you have not used the batteries for two months or longer, recharge them.
The NiMH batteries will not charge.
•
•
Try charging the batteries again after they have drained awhile.
If charging the batteries in an optional battery charger or when docked in an optional
HP Photosmart dock does not work, replace the batteries.
It takes the camera a long time to turn on.
•
Your camera may be slower to turn on if you have a high capacity (4GB or larger)
memory card inserted.
•
Having a large number of files (over 300) stored on a memory card affects the time
it takes for the camera to turn on. Transfer stored files to your computer, then format
the memory card.
•
Power-on time in
Playback is slow if you have a large number of tagged images
on your memory card. Transfer the images to your computer (see “Transferring and
printing images” on page 17) and review them there.
The camera does not respond when I press a button.
•
•
Turn on the camera.
Most of the camera buttons do not respond when the camera is connected to a
computer (directly or through an optional dock).
•
•
•
Replace or recharge the batteries.
The memory card may be defective. Remove the memory card and test the camera;
if the camera works, replace the memory card.
•
Format the internal memory and/or the memory card (see “Install and format an
The camera does not take a picture when I press the Shutter button.
•
•
•
Press the Shutter button all the way down.
Make sure you are in Picture Capture.
The memory card or internal memory may be full. Transfer images from the camera
to your computer, then format the internal memory or the memory card (see “Install
and format an optional memory card” on page 6). Or replace the card with a new one.
The camera may be processing. Wait a few seconds for the camera to finish
processing the last image before taking another picture.
•
The Image Display is not working.
•
The Image Display may have timed out. Press any camera button to wake up the
camera.
•
•
Replace or recharge the batteries.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
My image is blurry.
•
•
Use a tripod to hold the camera steady, or improve lighting conditions.
Make sure the subject of your pictures or video clips is within the focus range (at least
1 m or 39.37 in away).
•
•
Select a shooting mode appropriate for the scene you are capturing (see “Using the
Set the flash to
Auto Flash or Flash On and set the shooting mode to
Action.
My image is too bright.
•
•
Move back from the subject and use zoom.
My image is too dark.
•
Wait for natural lighting conditions to improve, use the flash (see “Setting the flash”
on page 10), or add indirect lighting.
•
If the subject you are trying to capture is outside the flash range, turn off the flash.
This causes a longer exposure time, so use a tripod or hold the camera steady. For
information about flash working distance for this camera, go to www.hp.com/
support, select your language and region, enter your camera model number in the
Search: Product field, click Product Information, then click Specifications.
My image is grainy.
•
natural lighting conditions to improve.
•
•
If the camera is warm, the effect will diminish as the camera cools. For best image
quality, avoid storing the camera in very hot locations.
Images are missing on my camera.
Remove the memory card and see if the images are stored in internal memory. If so,
I have two memory cards that are the same size, but one stores many more pictures
than the other.
•
Your memory card may contain files that are not images or videos recognized by the
camera. Save any data on the memory card that you want to keep, then format the
If your memory cards are 4GB or larger, the card that stores fewer images may have
been improperly formatted by a device that does not support 4GB or larger cards. A
new type of High Capacity Secure Digital (marked SDHC) memory card is now
available that prevents improper formatting and use by devices not supporting 4GB
or larger cards. Try formatting the card in this camera, which supports High Capacity
Secure Digital cards.
•
•
Your memory card may be defective. If you have formatted your memory card in the
camera and it does not show the expected capacity, consider replacing the memory
card.
28
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
My camera indicates I can only store 2000 images regardless of the Image Quality
setting.
When you turn on your camera with a memory card installed, the camera indicates the
number of images you can store on the memory card at the current
Image Quality
setting. This camera supports storing a maximum of 2000 images on a memory card.
It takes a long time to "Delete All" images from my memory card.
Having a large number of images stored on a memory card increases the time the camera
takes to delete them. Instead of deleting them, format the memory card (see “Install and
The Power light is on but the Image Display is off, or the camera seems stuck and
won't operate.
•
Slide
to a different position or press any camera button to reactivate the Image
Display.
•
The camera responds sluggishly when trying to review images.
•
Power-on time in
Playback is slow if you have a large number of tagged images
on your memory card. Transfer the images to your computer (see “Transferring and
printing images” on page 17) and review them there.
memory cards.
•
Video recording terminates abruptly. The video is saved successfully, but it is
shorter than expected.
Replace your memory card with a faster card. Look for cards marked High Performance,
Pro, Ultra, or High Speed.
Video recording terminates abruptly and the video will not play back.
If the video is stored on a memory card, transfer the video to your computer (see
The camera gets warm (or even hot) to the touch.
This is normal. However, if anything seems out of the ordinary, turn off the camera and
allow the camera to cool. Then examine the camera and the batteries for signs of possible
damage.
For best image quality, turn off the camera when not using. Always store the camera in
a cool place.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 8
My camera stalls when establishing a connection to the computer.
•
Your memory card may have a large number of images stored on it. The more images
you have on your card, the longer it takes to establish a connection to the computer
(up to five minutes). If you have a large number of images on the memory card, be
sure to allow this additional time to establish the connection.
•
Ensure that the USB cable is properly connected to the camera and computer, either
directly or via an optional dock.
•
•
Try connecting the USB cable to another USB port on the computer.
Turn the camera off, then on again. If that does not fix the problem, reset the camera
•
I cannot transfer images from the camera to my computer.
•
Configure your camera preferences so the HP Photosmart software starts
automatically when you connect your camera to your Macintosh. Open the HP
Photosmart Camera settings in System Preferences to make changes, or to view
the camera software help.
•
•
I get an error message when transferring images to my computer.
A power surge or electrostatic discharge may have affected the camera. Close the
HP Photosmart Software, disconnect the camera from the computer, and reset the
The HP Photosmart Software does not start automatically when I connect to my
Macintosh.
Configure your camera preferences so the HP Photosmart software starts automatically
when you connect your camera to your Macintosh. Open the HP Photosmart Camera
settings in System Preferences to make changes, or to view the camera software help.
The HP Photosmart Software takes a long time before it is ready to transfer images
from my camera.
Having a large number of files stored on an optional memory card affects the amount of
time it takes for the HP Photosmart Software to start transferring images. For best results,
transfer images to your computer frequently, and always format the card after transferring
My camera shuts down unexpectedly.
•
A power surge or electrostatic discharge may have affected the camera. Remove the
the battery and turn on the camera.
•
•
Recharge the battery.
Replace the battery.
30
Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
I am having a problem installing or using the HP Photosmart Software.
•
Make sure your computer meets the minimum system requirements as stated on the
camera packaging.
•
•
Refer to the HP Photosmart Software online help system.
Camera error messages
Should you receive one of the following error messages when using your camera, you
specific code.
•
•
•
•
•
Unsupported card—E330–200
Unable to format card—E330–202
Error saving image—E330–100
Error saving video—E330–102
Batteries Low (followed by data on battery types and performance)—AA–400
31
Download from Www.Somanuals.com. All Manuals Search And Download.
9 Product support
Use this section to find support information for your digital camera, including links to
helpful websites and an overview of the support process.
Helpful websites
Camera tips, product
registration, newsletter
subscriptions, driver and
software updates, purchase
HP supplies and accessories
Under Learn about:, click Digital Photography
Customers with disabilities
www.hp.com/hpinfo/community/accessibility (English only)
Hewlett-Packard Technical
Support; firmware, software,
and driver updates; support
information
Windows Vista support
www.hp.com/go/windowsvista (English only)
Getting assistance
To get the best from your HP product, consult the following standard HP support offerings:
1. Consult the product documentation.
•
•
•
Review the electronic Help section within the software.
Refer to the camera's Help screens.
contact the store where you purchased this camera. The Hewlett-Packard Technical
Support website is available to all HP customers. The Hewlett-Packard Technical
Support website is the fastest source of up-to-date product information and expert
assistance, including:
•
•
•
•
Fast e-mail access to qualified online support specialists.
Firmware, software, and driver updates for your camera.
Valuable product and troubleshooting information for technical issues.
Proactive product updates, support alerts, and HP newsletters (available when
you register your camera).
3. HP support by phone. Support options and fees vary by product, country/region, and
language. For a list of support conditions and phone numbers, visit www.hp.com/
4. Post-warranty period. After the limited warranty period, help is available online at
5. Extending or upgrading your warranty. If you would like to extend or upgrade your
camera's warranty, please contact the store where you bought the camera or check
6. If you already purchased an HP Care Pack Service, please check the support
conditions on your contract.
32
Product support
Download from Www.Somanuals.com. All Manuals Search And Download.
A Managing batteries
Your camera uses two AA batteries, either Alkaline, Photo Lithium, or rechargeable Nickel Metal
Hydride (NiMH). Photo Lithium and NiMH batteries provide longer battery life than Alkaline batteries.
Top points about batteries
•
The batteries shipped with your camera are AA Alkaline. These batteries have a short life and
are intended to let you begin using your camera immediately. When the camera warns that the
with Photo Lithium or rechargeable NiMH batteries for longer battery life.
Fully charge NiMH batteries before using them for the first time.
•
•
The first several times you recharge NiMH batteries, they may not provide the number of shots
per charge that you expect. Their performance will improve after the batteries have been
charged, then discharged completely four or five times. You can use the camera normally to
discharge the batteries during this conditioning period.
•
batteries are inserted improperly, the compartment door may close but the camera will not
operate.
•
•
If you do not intend to use your camera for more than one month, remove the batteries from the
camera.
The performance of all batteries will decrease as the temperature drops. To improve battery
performance, store the camera and batteries in a warm inside pocket when in a cold
environment. To prevent short-circuiting the batteries, never carry small metal items such as
keys or coins in the same pocket with your batteries.
Extending battery life
To conserve battery power, the Image Display turns off after a period of inactivity. Pressing any
button wakes up the camera. After five minutes of inactivity, the camera turns off.
To further extend battery life:
•
Set
•
•
•
•
Set your camera to
Use video recording sparingly.
Use Image Display sparingly.
When transferring or printing images, place your camera in an optional HP Photosmart dock
connected to AC power.
Safety precautions for using batteries
•
•
•
Always use two identical batteries of the same chemistry, brand, and age.
Do not place batteries in fire or heat them. Always store charged batteries in a cool location.
Do not connect the positive and negative terminals of the battery to each other with any metal
object.
•
Do not carry or store batteries with metal objects. Do not drop batteries into a change-filled
pocket.
•
•
•
•
Do not pierce batteries or subject them to strong impacts or shocks.
Do not solder directly onto batteries.
Do not allow batteries to get wet.
Do not disassemble or modify batteries.
Managing batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
33
Appendix A
•
•
Immediately discontinue use of a battery if, while using, charging, or storing the battery, the
battery emits an unusual smell, feels excessively hot (note that it is normal for the battery to feel
warm), changes color or shape, or appears abnormal in any other way.
In the event batteries leak and the fluid gets into one’s eye, do not rub the eye. Rinse well with
water and immediately seek medical care. If left untreated, the battery fluid could cause damage
to the eye.
CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used
batteries according to the instructions.
Power indicators
When the batteries are low or the camera is in a dock connected to AC power, one of the following
icons appears in the Image Display. If no battery icon appears in the Image Display, the batteries
have sufficient power to function normally.
Icon
Description
Battery level is low. Camera will soon power down.
Camera is operating on AC power.
NOTE: If the camera is without batteries for a prolonged period, the clock may be reset and
you may be prompted to update it the next time you power on the camera.
Battery performance
This graph shows the relative number of photos you can take using Photo Lithium, NiMH, and
Alkaline batteries. Actual performance may vary based on usage, battery type, and battery
manufacturer. Many additional factors affect the number of photos you can take (see “Top points
code AA-400.
The following table shows how Alkaline, Photo Lithium, and rechargeable NiMH batteries perform
in different types of use scenarios:
Type of Use
Alkaline
Photo
NiMH
Lithium
Most economical if you take more than 30 pictures per month Poor
Fair
Good
Fair
Most economical if you take fewer than 30 pictures per
month
Fair
Good
34
Managing batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
Type of Use
Alkaline
Photo
NiMH
Lithium
Heavy use of flash, frequent pictures
Heavy use of video
Poor
Poor
Poor
Poor
Poor
Fair
Good
Good
Good
Good
Good
Good
Good
No
Good
Good
Good
Fair
Heavy use of Image Display
Overall battery life
Low temperature/winter use
Infrequent use (without dock)
Infrequent use (with dock)
Want to recharge battery
Fair
Fair
Fair
Good
Good
No
Recharging NiMH batteries
You can recharge optional NiMH batteries with an optional HP quick recharger or with an optional
HP Photosmart dock. For information about recharging NiMH batteries, as well as safety precautions
when recharging, see the documentation that came with your HP quick recharger or HP Photosmart
dock.
Recharging NiMH batteries
Download from Www.Somanuals.com. All Manuals Search And Download.
35
B Specifications
Resolution
Pictures:
•
•
5.0MP (2576 by 1920) effective pixel count
5.02MP (2592 by 1936) total pixel count
Video clips (QVGA):
320 by 240 total pixel count, 24 frames/sec
Sensor
Diagonal 7.26 mm (1/2.5-inch, 4:3 format) CCD
Color depth
36 bit (12 bits by 3 colors). 36 bit images are transformed into an
optimized 24 bit image and stored in the JPEG format. This
transformation results in no discernible change to color or detail in the
stored image, and allows the image to be read by computers.
Lens
Fixed focal length—f/4.5
None
Viewfinder
Zoom
5x digital zoom
Focus
Fixed focus—1 m (39.37 in) to infinity
1/1000 to 2 seconds
Shutter speed
Built-in flash
Yes, 6-second typical recharge time (8-second maximum recharge time
at power-on)
support, select your language and region, enter your camera model
number in the Search: Product field, click Product Information, then
click Specifications.
Image Display
3.81 cm (1.5 in) color LTPS TFT LCD with backlight, 153,600 pixels (640
by 240) total pixel count
Storage
•
•
•
16MB internal flash memory.
Slot for memory card.
This camera supports standard, high speed, and high capacity
Secure Digital (SD and SDHC) memory cards, 32MB to 8GB.
This camera supports storing a maximum of 2000 images on a
memory card.
•
•
The number of images or video clips that can be saved in memory
depends on the
Compression format
•
•
JPEG (EXIF) for pictures
Motion JPEG for video clips
Interfaces
Standards
USB mini-B
•
•
•
•
•
•
•
USB—PTP and MSDC
JPEG
Motion JPEG
DPOF
EXIF
DCF
DPS
36
Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
(continued)
External body
dimensions
Measurements with camera off and lens retracted (width, depth, height):
92.5 mm (W) by 29.5 mm (D) by 62.0 mm (H) (3.64 in by 1.16 in by 2.44
in)
Weight
Power
109 grams (3.84 ounces) without battery
Power source: two AA batteries (Alkaline, Photo Lithium, or rechargeable
NiMH)
Temperature range
Operational:
0° to 40° C (32° to 104° F) at 15% to 85% relative humidity
Storage:
–30° to 65° C (–22° to 149° F) at 15% to 90% relative humidity
Memory capacity
Not all 16MB of internal memory is available for storing images, because some memory is used for
internal camera operations. The actual file sizes and number of still images that can be stored in
internal memory or on a memory card will vary depending on the content of each still image or length
of each video clip.
Image quality
To locate the approximate number and average size of still images that can be stored in internal
memory when the camera is set to different Image Quality settings (see Image Quality
language and region, enter your camera model number in the Search: Product field, click Product
Information, then click Specifications.
Memory capacity
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Index
flash
red-eye reduction 10
setting 10
Flash button 3
focal length 36
format memory card 6
A
N
Action mode 11
arrow buttons 3
assistance 32
Auto mode 11
Night Portrait mode 11
number of
pictures 37
pictures remaining 8
B
O
G
batteries
getting assistance 32
ON/OFF button 3
online
conserving 33
install 4
destinations 23
print buying 23
H
performance 34
top points about use 33
battery door 4
HP Photosmart Express 21
HP Photosmart Software 6
P
Photosmart Express Menu
buying prints online 23
marking images for
printing 21
I
Image Display 3
Image Quality 11, 37
images
C
camera
dimensions 37
specifications 36
turn on/off 4
Date & Time Imprint 12
magnifying 15
sharing images 23
sending 24
Playback 13
transfer to computer 17
install memory card 6
install software 6
Instant Review 9, 12
interfaces 36
Camera Setup Menu 25
Color 11
compression format 36
Playback Menu 14
Portrait mode 11
power
indicators 34
ON/OFF button 3
prints, buy online 23
problems and solutions 26
internal memory 37
L
D
Landscape mode 11
Date & Time Imprint 12
Delete button 3
digital zoom 9
dimensions 37
direct print 19
R
M
record video clips 9
red-eye removal 15
Region 5
magnifying images 15
memory
capacity 37
card door 4
Display Brightness 25
removing red eyes 15
reviewing images 13
E
Menu/OK button 3
menus
e-mail images 23
S
safety precautions for
batteries 33
selecting images for
selecting images for printing 21
Camera Setup 25
Photosmart Express 21
Picture Capture 11
Playback 14
F
Favorites 15
Move Images to Card 14
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Self-Timer
light 4
setting up destinations 23
share pictures 21
shutter speed 36
slideshow 16
software install 6
solving problems 26
sounds of camera 25
specifications 36
storage 36
support process 32
T
Theatre mode 11
Thumbnails 15
troubleshooting 26
turn on/off power 4
U
USB configuration 18, 25
V
video clips 9
Video mode 11
View Slideshow 16
viewing thumbnails 15
Vista support 32
W
weight 37
Windows Vista support 32
Z
zoom 9
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Regulatory / Geltende Richtlinien / Informations règlementaires
Geräuschemission
LpA < 70 dB
Am Arbeitsplatz
Normaler Betrieb
nach DIN 45635 T. 19
FCC statement
The United States Federal Communications Commission (in 47 CFR 15.105) has specified that the following notice be brought to the attention of users of this product.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
For further information, contact:
Manager of Corporate Product Regulations
Hewlett-Packard Company
3000 Hanover Street
Palo Alto, Ca 94304
(650) 857-1501
HP Photosmart E330 series Digital Camera Declaration of Conformity (European Economic Area)
According to ISO/IEC 17050-1 and EN 17050-1
Supplier's name:
Hewlett-Packard Singapore (Pte) Ltd
Imaging and Printing Manufacturing Operation Singapore
Supplier’s address:
60 Alexandra Terrace #07-01, The Comtech
Singapore 118502
declares that the product:
Product name:
HP Photosmart E330 series Digital Camera (may contain suffixes)
L2495A, L2496A, L2497A, L2498A, L2499A, L2500A
Product number(s):
Regulatory model:
Product options:
SNPRB-0707
HP Photosmart 2200 Camera Charging Dock (product number Q6262A, Regulatory Model SDCAB-0703) .
Conforms to the following Product Specifications:
Safety
IEC/EN 60950-1:2001
IEC/EN 60825-1:1994+A1:2002+A2:2001 Class 1 LED
Electromagnetic compatibility (EMC)
EN 55022:1998+A1:2000+A2:2003, Class B
IEC/EN 61000-3-2:2000
IEC/EN 61000-3-3:1995 + A1:2001
EN 55024:1998+A1:2001+A2:2003
Supplementary information:
The product herewith complies with the requirements of the Low Voltage Directive 2006/95/EC and the EMC Directive 2004/108/EC and carries the CE marking accordingly.
Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Regulatory-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|