HP ZR2040w, ZR2240w, ZR2440w and
ZR2740w LCD Monitors
User Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Guide
This guide provides information on setting up the monitor and technical specifications.
WARNING! Text set off in this manner indicates that failure to follow directions could result in bodily
harm or loss of life.
CAUTION: Text set off in this manner indicates that failure to follow directions could result in
damage to equipment or loss of information.
NOTE: Text set off in this manner provides important supplemental information.
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
iv
About This Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
1 Product Features ............................................................................................................................................ 1
2 Setting Up the Monitor ................................................................................................................................... 5
Mounting the ZR2040w Panel ........................................................................................... 15
3 Operating the Monitor .................................................................................................................................. 23
Using the On-Screen Display Menu (Select Models) ........................................................ 27
4 Locating Additional Information .................................................................................................................. 28
Appendix A Technical Specifications ............................................................................................................ 29
v
Download from Www.Somanuals.com. All Manuals Search And Download.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Product Features
The LCD (liquid crystal display) monitors have an active matrix of thin-film transistors (TFT). All
models have the following features:
●
●
●
●
●
●
●
●
●
Mercury-free LED backlight
Wide viewing angle to allow viewing from a sitting or standing position, or moving side-to-side
Removable pedestal and VESA-standard mounting holes for flexible mounting solutions
Support for the optional HP speaker bar (purchased separately)
Plug and play capability when supported by the operating system
Security slot provision on rear of monitor for optional cable lock
Cable management feature for placement of cables and cords
HDCP (High-Bandwidth Digital Content Protection) copy protection on all digital inputs
Software and documentation CD that includes monitor drivers, utilities, and product
documentation
●
●
●
Energy saver feature to meet requirements for reduced power consumption
Intelligent Management AssetControl
Compliant with the European Union RoHS Directive
ZR2040w Model
Features of the ZR2040w model include:
●
50.8 cm (20-inch) diagonal viewable area display with 1600 × 900 resolution, plus full-screen
support for lower resolutions
●
●
●
●
●
●
Video signal input to support VGA analog with VGA signal cable provided
Video signal input to support DVI digital with DVI-D signal cable provided
Video signal input to support DisplayPort digital with DisplayPort signal cable provided
Landscape and portrait orientations
Tilt adjustment
On-Screen Display (OSD) adjustments in several languages for ease of setup and screen
optimization
●
HP Display Assistant utility software for adjusting monitor settings and enabling the theft
deterrence feature
●
●
●
Auto-adjustment Pattern Utility
Privacy filter slots to insert filters (purchased separately) to block side screen viewing
Energy Star Qualified and meets TCO Requirements
ZR2040w Model
1
Download from Www.Somanuals.com. All Manuals Search And Download.
ZR2240w Model
Features of the ZR2240w model include:
●
54.72 cm (21.5-inch) diagonal viewable area display with 1920 × 1080 resolution, plus full-
screen support for lower resolutions
●
●
●
●
●
●
Video signal input to support VGA analog with VGA signal cable provided
Video signal input to support DVI digital with DVI-D signal cable provided
Video signal input to support HDMI digital
Dynamic Contrast Ratio: 2,000,000:1
Video signal input to support DisplayPort digital with DisplayPort signal cable provided
USB 2.0 hub with one upstream (connects to the computer) and four downstream (connect to
USB devices) ports
●
●
●
USB cable included to connect to the monitor's USB hub and to a USB connector on a computer
8-way comfort adjust including Height, Tilt, Pivot and Swivel adjustments
HP Quick Release 2 is now a flush mount solution that lets you quickly install the panel with a
simple click and remove it with the convenient sliding tab release
●
●
Easy access pull-out information card with the information needed for a support call
On-Screen Display (OSD) adjustments in several languages for ease of setup and screen
optimization
●
HP Display Assistant utility software for adjusting monitor settings and enabling the theft
deterrence feature
●
●
●
Auto-adjustment Pattern Utility
Privacy filter slots to insert filters (purchased separately) to block side screen viewing
Energy Star Qualified and meets TCO Requirements
ZR2440w Model
Features of the ZR2440w model include:
●
61.13 cm (24-inch) diagonal viewable area display with 1920 × 1200 resolution, plus full-screen
support for lower resolutions
●
●
●
●
●
Video signal input to support DisplayPort digital with DisplayPort signal cable provided
Video signal input to support HDMI digital
Video signal input to support DVI digital with DVI-D signal cable provided
Dynamic Contrast Ratio: 2,000,000:1
USB 2.0 hub with one upstream (connects to the computer) and four downstream (connect to
USB devices) ports
●
●
●
USB cable included to connect to the monitor's USB hub and to a USB connector on a computer
SPDIF Digital Audio Output signal
Analog audio output signal to support 2.0 Sound
2
Chapter 1 Product Features
Download from Www.Somanuals.com. All Manuals Search And Download.
●
●
8-way comfort adjust including Height, Tilt, Pivot and Swivel adjustments
HP Quick Release 2 is now a flush mount solution that lets you quickly install the panel with a
simple click and remove it with the convenient sliding tab release
●
●
Easy access pull-out information card with the information needed for a support call
On-Screen Display (OSD) adjustments in several languages for ease of setup and screen
optimization
●
HP Display Assistant utility software for adjusting monitor settings and enabling the theft
deterrence feature
●
●
Privacy filter slots to insert filters (purchased separately) to block side screen viewing
Energy Star Qualified and meets TCO Requirements
ZR2440w Model
3
Download from Www.Somanuals.com. All Manuals Search And Download.
ZR2740w Model
Features of the ZR2740w model include:
●
●
●
●
68.74 cm (27-inch) diagonal viewable area display with 2560 x 1440 resolution
Video signal input to support DVI digital with DVI-Dual Link signal cable provided
Video signal input to support DisplayPort digital with DisplayPort signal cable provided
USB 2.0 hub with one upstream (connects to the computer) and four downstream (connect to
USB devices) ports
●
●
●
USB cable included to connect to the monitor's USB hub and to a USB connector on a computer
8-way comfort adjust including Height, Tilt, Pivot and Swivel adjustments
HP Quick Release 2 is now a flush mount solution that lets you quickly install the panel with a
simple click and remove it with the convenient sliding tab release
●
Easy access pull-out information card with the information needed for a support call
4
Chapter 1 Product Features
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Setting Up the Monitor
To set up the monitor, ensure that the power is turned off to the monitor, computer system, and other
attached devices, then follow the instructions below.
NOTE: Be sure the master power switch, located on the rear panel of the monitor, is in the off
position. The master power switch turns off all power to the monitor.
Installing the Pedestal
NOTE: Do not install the pedestal if the monitor will be used on a wall, swing arm, or other mounting
chapter.
CAUTION: Whenever you handle the monitor, take care not to touch the surface of the LCD panel.
Pressure on the panel may cause non-uniformity of color or disorientation of the liquid crystals. If this
occurs the screen will not recover to its normal condition.
To assemble the ZR2040w, slide the pedestal upright into its base, as shown on the following page.
Figure 2-1 Assembling the ZR2040w pedestal
Installing the Pedestal
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Models ZR2240w, ZR2440w, and ZR2740w use the HP Quick Release 2 mechanism for easy moving
of the monitor. To mount the panel onto the pedestal:
1. Slide the mounting plate on the pedestal under the upper lip of the recess in the back of the
panel.
2. Lower the pedestal into the recess until it snaps into place.
3. The HP Quick Release 2 latch pops up when the monitor is locked in place.
Figure 2-2 Mounting the Panel onto the HP Quick Release 2
Rear Components
ZR2040w Model
Figure 2-3 ZR2040w Rear Components
Component
Function
1
2
3
4
5
AC Power Connector
Connects the AC power cord to the monitor.
Provides slot for use with cable security locks.
Connects the DisplayPort cable to the monitor.
Connects the DVI-D cable to the monitor.
Connects the VGA cable to the monitor.
Cable Lock Provision
DisplayPort Connector
DVI-D Connector
VGA Connector
6
Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
ZR2240w Model
Figure 2-4 ZR2240w Rear Components
10
11
2
8
3
4
5
6
7
9
Component
Function
1
2
Cable Lock Provision
Master Power Switch
Provides slot for use with cable security locks.
Turns off all power to the monitor.
NOTE: Putting the switch in the Off position will yield the
lowest power state for the monitor when not in use.
3
4
5
6
7
8
AC Power Connector
DisplayPort Connector
HDMI Connector
Connects the AC power cord to the monitor.
Connects the DisplayPort cable to the monitor.
Connects an HDMI cable to the monitor.
Connects the DVI-D cable to the monitor.
Connects the VGA cable to the monitor
DVI-D Connector
VGA Connector
USB Upstream Connector
Connects the monitor USB hub cable to a host USB port/
hub.
9
USB Downstream Connectors
Connects optional USB devices to the monitor.
Rear Components
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Component
Function
10
11
Information Card
Provides information needed for a support call.
Connects optional USB devices to the monitor.
USB Downstream Connectors
(side panel)
ZR2440w Model
Figure 2-5 ZR2440w Rear Components
Component
Function
1
2
Cable Lock Provision
Provides slot for use with cable security locks.
Turns off all power to the monitor.
Master Power Switch
NOTE: Putting the switch in the Off position will yield the
lowest power state for the monitor when not in use.
3
4
AC Power Connector
Digital Audio Output
Connects the AC power cord to the monitor.
Connects an audio cable with RCA plug to the monitor.
8
Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Component
Function
5
Analog Audio Output
Connects an audio cable with 3.5 mm L/R mini-plug to the
monitor.
6
7
8
9
DisplayPort Connector
HDMI Connector
Connects the DisplayPort cable to the monitor.
Connects an HDMI cable to the monitor.
Connects the DVI-D cable to the monitor.
DVI-D Connector
USB Upstream Connector
Connects the monitor USB hub cable to a host USB port/
hub.
10
11
12
USB Downstream Connectors
Information Card
Connects optional USB devices to the monitor.
Provides information about the monitor.
USB Downstream Connectors
(side panel)
Connects optional USB devices to the monitor.
Rear Components
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ZR2740w Model
Figure 2-6 ZR2740w Rear Components
Component
Function
1
2
Cable Lock Provision
Provides slot for use with cable security locks.
Turns off all power to the monitor.
Master Power Switch
NOTE: Putting the switch in the Off position will yield the
lowest power state for the monitor when not in use.
3
4
5
6
AC Power Connector
DisplayPort Connector
DVI-D Connector
Connects the AC power cord to the monitor.
Connects the DisplayPort cable to the monitor.
Connects the DVI-D cable to the monitor.
USB Upstream Connector
Connects the monitor USB hub cable to a host USB port/
hub.
7
8
9
USB Downstream Connectors
Information Card
Connects optional USB devices to the monitor.
Provides information needed for a support call.
Connects optional USB devices to the monitor.
USB Downstream Connectors
(side panel)
10 Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Routing and Connecting the Cables
Place the monitor in a convenient, well-ventilated location near the computer.
ZR2040w Model
The cable-restraining bar on the pedestal of the ZR2040w is held in place by four tabs.
Figure 2-7 Cable-Restraining Bar
1. To remove the bar, first pull one end of the bar away from the pedestal (1). When it is free, the
bar can be removed (2).
do not have to connect them all.
3. For each cable you've attached, plug the other end into the appropriate connector on the
computer.
Routing and Connecting the Cables 11
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Connect the AC power cord and plug it into the wall outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety
feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all
times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one
may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from
the electrical outlet, grasp the cord by the plug.
5. Gather the video cables and replace the cable-restraining bar so as to contain the cables.
Figure 2-8 ZR2040w Model Cable Routing
12 Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
ZR2240w, ZR2440w, and ZR2740w Models
1. Remove the cable routing cover by pulling it straight off the front of the column.
Figure 2-9 Cable Routing Cover
2. Before connecting the cables, route them through the cable routing hole in the column (1) and
replace the cable routing cover (2).
Figure 2-10 Cable Routing
Routing and Connecting the Cables 13
Download from Www.Somanuals.com. All Manuals Search And Download.
identify the connectors on your monitor. For each one, plug in one end of the appropriate cable.
Attach the other end to your computer or other video source.
The ZR2440w model supports audio output from the HDMI and DisplayPort inputs. Use the RCA
jack for digital output and the 3.5 mm mini-jack for analog 2.0 Sound.
NOTE: It is not necessary to connect all the connectors to video sources.
4. If you will be using USB devices (such as a digital camera, USB keyboard, or USB mouse),
connect one end of the provided USB cable to the USB hub connector on the rear panel of the
computer, and the other end to the upstream USB connector on the monitor. The four
downstream USB ports (two on the rear and two on the side) are now available for your devices.
Figure 2-11 Connecting USB Cables
5. Connect one end of the power cable to the AC power connector on the back of the monitor, and
the other end to an electrical wall outlet.
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may
accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the
electrical outlet, grasp the cord by the plug.
Mounting the Monitor to User-Supplied Support Hardware
The monitor can be installed to any support that meets the VESA standards.
NOTE: This apparatus is intended to be supported by a UL or CSA Listed wall mount bracket.
14 Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION: The HP Quick Release 2 can be installed directly to a wall to mount the monitor panel. It
is designed to support a maximum of up to 10.9 kg (24 lbs). If you are mounting to a wall, HP
recommends that you consult with a qualified engineering, architectural, or construction professional
to determine the appropriate type and quantity of mounting fasteners required for your application
and to ensure that the mounting solution is properly installed to support applied loads.
Before you begin, make sure the monitor is turned off and the power and signal cables are
disconnected. Also disconnect any USB cables. To protect the panel, lay it face down on a soft, flat
surface.
Mounting the ZR2040w Panel
1. Remove the four screws holding the panel to the pedestal.
2. To mount the panel, use the four holes surrounding the HP logo on the back of the monitor.
Figure 2-12 Mounting the ZR2040w Model
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To
attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long
screws are required. Longer screws must not be used because they may damage the monitor. It
is important to verify that the manufacturer’s mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display panel. For best performance, it
is important to use the power and video cables provided with the monitor.
3. If you mount the panel in portrait orientation, you will need to rotate the image to match. See
Portrait Orientation on page 22 for instructions.
Mounting the Monitor to User-Supplied Support Hardware 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Mounting a Quick-Release Panel
The ZR2240w, ZR2440w and ZR2740w support mounting to VESA-compliant hardware in two ways:
●
Remove the HP stand and use the 4 VESA mount threaded holes (100 x 100 pattern) that are in
the Quick Release 2 recess. Screws of the appropriate length are provided.
Figure 2-13 Mounting a VESA Arm
●
Alternatively, follow the instructions below to use the HP Quick Release 2 feature with your
VESA mounting hardware.
Start by removing the pedestal.
Figure 2-14 Removing the Pedestal
1. Press down on the latch near the bottom center of the monitor to unlock the HP Quick Release
2.
2. Swing the bottom of the pedestal up until the mounting plate clears the recess in the panel.
16 Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Slide the pedestal out of the recess.
4. Remove four screws holding the mounting plate to the head of the pedestal:
Figure 2-15 Removing the Mounting Plate from the Pedestal
5. Remove four screws to separate the mounting plate from its cover:
Figure 2-16 Removing the Cover from the Mounting Plate
Mounting the Monitor to User-Supplied Support Hardware 17
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Attach the mounting plate to the wall or swing arm of your choice.
Figure 2-17 Installing the Mounting Plate
CAUTION: This monitor supports the VESA industry standard 100 mm mounting holes. To
attach a third-party mounting solution to the monitor, four 4 mm, 0.7 pitch, and 10 mm long
screws are required. Longer screws must not be used because they may damage the monitor. It
is important to verify that the manufacturer’s mounting solution is compliant with the VESA
standard and is rated to support the weight of the monitor display panel. For best performance, it
is important to use the power and video cables provided with the monitor.
7. Place the panel on the mounting bracket you've installed by aligning its recess with the mounting
bracket, then sliding it down over the top of the bracket and pressing it back into place against
the bracket. The release latch on the monitor will pop up when the monitor is safely locked in
place.
Locating the Information Card (Select Models)
Figure 2-18 The Pull-out Information Card
The ZR2240w, ZR2440w, and ZR2740w models provide a card with the information you will need
when contacting HP for support. The card pulls out from behind the USB connectors on the left side
of the panel.
18 Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying information is located on the pull-out card (instead of on labels on the back of the monitor).
Warranty support information (model number, serial number, product number) is printed on the front
of the card and regulatory information is printed on the back of the card.
Installing a Cable Lock
You can secure the monitor to a fixed object with an optional cable lock available from HP.
Figure 2-19 Installing a Cable Lock
Turning on the Monitor
1. If your monitor has a master power switch (located on the rear of the monitor), put it in the On
position (I) .
2. Press the power button on the computer to turn it on.
3. Press the power button on the front of the monitor to turn it on.
CAUTION: Burn-in image damage may occur on monitors that display the same static image on
screen for a prolonged period of time (12 consecutive hours of non-use). To avoid burn-in image
damage on the monitor screen, you should always activate a screen saver application or sleep timer,
or turn off the monitor when it is unused for a long time. Image retention is a condition that may occur
on all LCD screens. Monitors with a “burned-in image” are not covered under the HP warranty.
NOTE: If pressing the power button has no effect, the Power Button Lockout feature may be
enabled. To disable this feature, press and hold the monitor power button for 10 seconds.
You may see a status message or an image on the screen. The LED on the front panel will turn blue.
If the monitor is not receiving any input, it will soon go into low-power mode, indicated by the LED
turning amber.
Installing a Cable Lock 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Monitor
1. Tilt the monitor's panel forward or backward to set it to a comfortable eye level.
Figure 2-20 Adjusting the Tilt
2. If your monitor has the ability to swivel, adjust it to the left or right for the best viewing angle.
Figure 2-21 Adjusting the Viewing Angle (Select Models)
3. Models ZR2240w, ZR2440w, and ZR2740w provide for height adjustment. Adjust the monitor's
height so that it is parallel to your eye height for a comfortable viewing position. A lock-down/
release button on the back of the column prevents the display head from sliding up when the
20 Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
monitor is lifted. If the display head is locked in the lowest position, release and adjust it as
follows:
Figure 2-22 Adjusting the Height (Select Models)
a. Make sure that the monitor is safely positioned on a stable surface.
b. Gently push down on the display head (1).
c. While pushing down the display head, press the lock-down/release button on the back of
the column (2).
d. Guide the display head up to the desired height (3).
4. The default orientation of the monitor is landscape. If you want to change to portrait, follow the
Adjusting the Monitor 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Portrait Orientation
The ZR2040w must be mounted in the orientation you wish to use. Other models can be pivoted after
mounting. To do this, raise the panel to its highest position and pivot it clockwise from landscape to
portrait.
Figure 2-23 Pivoting the Monitor (Select Models)
NOTE: It may be necessary to tilt the monitor panel back to prevent the corner of the panel from
coming in contact with the base when pivoting.
If your model is a ZR2740w, rotate the image using the workstation video driver control panel (for
AMD Graphics, start the CATALYST Control Center; for NVIDIA graphics, start the NVIDIA Control
Center). Refer to the Online Help of your workstation video driver for more information.
For other models, use the HP Display Assistant software (included on the software and
documentation CD) to rotate the image. If your model has an OSD, it can be rotated to portrait mode
by pressing the Menu button on the monitor's front panel, then selecting OSD Control > Rotate OSD.
22 Chapter 2 Setting Up the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Operating the Monitor
Overview of Operation
If you are not familiar with HP Performance monitors, read this section for an overview of how they
operate. This will help you locate specific information elsewhere in this manual.
Your monitor provides for more than one source of input. It will scan the various inputs to find an
active one and display that image. You can change sources manually, using the SOURCE button on
the front panel. The scanning order is initially set to DisplayPort, DVI-D, HDMI, VGA, making
DisplayPort the default source of video.
Some models give you control of the scanning order and default source through an On-Screen
Display (OSD) menu. If your front panel has a menu (
lets you prevent the monitor from switching sources.
) button, it provides an OSD. The OSD also
If the monitor is not receiving any input, it will go into low power mode (“sleep”) and the LED on the
front will turn from blue to amber. This means that the monitor will sleep when the computer does,
unless it has some other source of input. You can send it into low-power mode using the power (
)
button on the front. The OSD lets you put sleeping and waking on a timer or stay awake all the time
(not recommended).
Your monitor displays its state through the LED on the front panel and through messages on the
screen. These indicators vary from one model to another, but all use the following LED indicators:
●
●
●
●
Blue – normal operation
Amber – low-power mode
Flashing blue – the input calls for higher resolution than the monitor can provide
Flashing amber – timed sleep, that is, the monitor is in low-power mode and will awaken on a
timer
●
No light – normal operation or power off
In addition to these indicators, some models use screen messages as well, detailed later in this
chapter.
Image quality is well-controlled with digital inputs. For analog input, various tools are provided for
adjusting the quality: a software utility, an auto-adjust function, and options in the OSD.
ZR2040w and ZR2240w Model
The order in which these monitors scan the inputs begins with the DisplayPort, making it the default
input. If DisplayPort is inactive, the monitor will scan for an active input in this order: DVI-D, HDMI
(ZR2240w only), VGA. You can change the current input, the default source, and the scan order
Overview of Operation 23
Download from Www.Somanuals.com. All Manuals Search And Download.
through the OSD. Pressing the + button on the front of the monitor will take you directly to the OSD
source-control submenu.
Figure 3-1 ZR2040w and ZR2240w Front Panel Controls
Control
Function
1
Menu
Minus
Opens, selects or exits the OSD menu.
2
3
4
If the OSD menu is on, press to navigate backward through
the OSD menu and decrease adjustment levels.
If the OSD menu is inactive, resets OSD choices to their
factory defaults, ZR2040w model only.
Plus/source
OK/auto
If the OSD menu is on, press to navigate forward through
the OSD menu and increase adjustment levels.
If the OSD menu is inactive, press to activate the source
button that chooses the video signal input.
If the OSD menu is on, press to select the highlighted
menu item.
If the OSD menu is inactive, press to activate the auto
adjustment feature to optimize the screen image.
5
6
Power
Puts the monitor into low-power mode.
Power LED
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
Off indicates power off, or normal operation if the LED is
suppressed.
24 Chapter 3 Operating the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
ZR2440w Model
The default input on the ZR2440w is DisplayPort and the scan order is initially set to DisplayPort,
DVI-D, HDMI. You can change the current input, the default and the scan order through the OSD.
Pressing the + button on the front of the monitor will take you directly to the OSD source-control
submenu.
Figure 3-2 ZR2440w Front Panel Controls
Control
Function
1
Menu
Minus
Opens, selects or exits the OSD menu.
2
3
If the OSD menu is on, press to navigate backward through
the OSD menu and decrease adjustment levels.
Plus/source
If the OSD menu is on, press to navigate forward through
the OSD menu and increase adjustment levels.
If the OSD menu is inactive, press to activate the source
button that chooses the video signal input (VGA, DVI, or
DisplayPort).
4
OK
If the OSD menu is on, press to select the highlighted
menu item.
OK
5
6
Power
Turns the monitor on or off as long as the master power
switch on the rear panel is on.
Power LED
Blue = Fully powered.
Amber = Sleep mode.
Flashing Amber = Sleep Timer mode.
No light indicates power off, or normal operation if the LED
is suppressed.
Overview of Operation 25
Download from Www.Somanuals.com. All Manuals Search And Download.
ZR2740w Model
For the ZR2740w model, the default input is DisplayPort. You can change the current input by
pressing the SOURCE button on the front of the panel.
The front buttons also let you adjust brightness and put the monitor in low-power mode:
Figure 3-3 ZR2740w Front Panel Controls
Control
Function
1
SOURCE
Source
Toggles the video signal input source between DisplayPort
and DVI-D.
2
3
4
-
Minus
Plus
Decreases brightness.
Increases brightness.
+
Power
Turns the monitor on or off as long as the master power
switch on the rear panel is on.
5
Power LED
Solid blue indicates the first 30 seconds of normal
operation.
Solid amber indicates low-power mode.
Continuously-flashing blue indicates signal input in a non-
supported mode. (See ZR2740w Model Preset Modes
on page 36 for supported modes.)
Three blue flashes while you are adjusting brightness
indicate the limit of the screen's brightness range.
No light indicates normal operation or power off.
Holding down either the + or — button causes the brightness setting to change more rapidly. When
you reach either the minimum or maximum brightness, the LED will flash three times.
26 Chapter 3 Operating the Monitor
Download from Www.Somanuals.com. All Manuals Search And Download.
Pressing the Power button, , puts the monitor in low power mode. (To turn power off completely,
use the switch on the rear of the panel.) The monitor also enters low-power mode when there is no
video signal input.
When the monitor is first powered on, the LED turns blue and remains blue for about half a minute. It
then turns off. If the monitor receives a signal outside its range (e.g., too high a frequency), the LED
flashes blue continuously.
This model does not use an OSD or on-screen messages.
Using the On-Screen Display Menu (Select Models)
The On-Screen Display (OSD) menu gives you choices for operating your monitor. Not all menu
options below are available on all models. For example, monitors with no analog input do not show
menus specific to analog images. The ZR2740w does not use an OSD. Models that use an OSD
have a menu (
) button on the front.
NOTE: If there is a problem with the display settings, try resetting the settings to the factory defaults
by opening the OSD and selecting Factory Reset from the OSD menu.
NOTE: To view an OSD menu simulator, visit the HP Customer Self Repair Services Media Library
Overview of Operation 27
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Locating Additional Information
Refer to the HP LCD Monitors Reference Guide included on the CD with your monitor for additional
information on:
●
●
●
●
●
●
●
Optimizing monitor performance
Safety and maintenance guidelines
Installing software from the CD
Using the OSD menu
Downloading software from the Web
Agency and regulatory notices
Troubleshooting and recommended solutions to common problems
Select your country or region, select Product Support & Troubleshooting, and then enter your monitor
model in the SEARCH window.
If the information provided in the guide or in the HP LCD Monitors Reference Guide do not address
●
Chat online with an HP technician
NOTE: When support chat is not available in a particular language, it is available in English.
●
●
●
E-mail support
Find support telephone numbers
Locate an HP service center
28 Chapter 4 Locating Additional Information
Download from Www.Somanuals.com. All Manuals Search And Download.
A Technical Specifications
NOTE: All performance specifications are provided by the component manufacturers. Performance
specifications represent the highest specification of all HP's component manufacturers' typical level
specifications for performance and actual performance may vary either higher or lower.
ZR2040w Model
Display
Type
50.8 cm diagonal
TFT LCD
20 inches diagonal
17.4 x 9.8 inches
Viewable Image Size
Tilt
44.28 x 24.9 cm
-5 to 25º
Maximum Weight (Unpacked)
3.8 kg
8.44 lbs
Dimensions (including base)
35.92 cm
15.11 cm
48.2 cm
14.14 inches
5.94 inches
18.97 inches
Height
Depth
Width
Maximum Graphic Resolution
Optimum Graphic Resolution
Text Mode
1600 x 900 (60 Hz)
1600 x 900 (60 Hz)
720 x 400
Dot Pitch
0.276 (W) x 0.276 (H) mm
92
Pixels Per Inch
Horizontal Frequency
Vertical Refresh Rate
Environmental Requirements Temperature
83 kHz
60 Hz
5 to 35º C
41 to 95º F
-4 to 140º F
Operating Temperature
Storage Temperature
-20 to 60º C
Relative Humidity:
Operating
20 to 80%
5 to 95%
Storage
Power Source
100 to 240 VAC, 50/60 Hz
Altitude:
Operating
Storage
0 to 5000 m
0 to 16,400 feet
0 to 40,000 feet
0 to 12,192 m
ZR2040w Model 29
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Consumption (maximum)
Low-power mode
33 watts
0.3 watts
Input Terminal
One DVI connector with cable
included; one DisplayPort connector
with cable included; one VGA
connector with cable
ZR2240w Model
Table A-1 ZR2240w Specifications
Display
Type
54.72 cm diagonal
TFT LCD
21.5 inches diagonal
18.76 x 10.59 inches
Viewable Image Size
Tilt range
47.66 x 26.89 cm
-5 to 35º
Swivel range
-45 to 45º
Maximum Weight (Unpacked)
7.92 kg
17.44 lbs.
Dimensions (including base)
Height (highest position)
Height (lowest position)
Depth
45.71 cm
36.71 cm
23.39 cm
50.74 cm
18 inches
14.45 inches
9.2 inches
19.98 inches
Width
Maximum Graphic Resolution
Optimum Graphic Resolution
1920 x 1080 (60 Hz) analog input
1920 x 1080 (60 Hz) digital input
1920 x 1080 (60 Hz) analog input
1920 x 1080 (60 Hz) digital input
Text Mode
720 x 400
0.2475 mm
102
Dot Pitch
0.0097 inches
Pixels Per Inch
Horizontal Frequency
Vertical Refresh Rate
Environmental Requirements Temperature
24 – 83 kHz
50 – 76 Hz
5 to 35º C
41 to 95º F
-4 to 140º F
Operating Temperature
Storage Temperature
-20 to 60º C
Relative Humidity:
Operating
20 to 80%
5 to 95%
Storage
Power Source
100 – 240 VAC, 50/60 Hz
30 Appendix A Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A-1 ZR2240w Specifications (continued)
Altitude:
0 to 5000 m
0 to 16,400 feet
0 to 40,000 feet
Operating
Storage
0 to 12,192 m
Power Consumption (maximum)
Low-power mode
46 watts
0.3 watts
Input Terminal
One VGA connector with cable included;
one DVI connector with cable included;
one HDMI connector; one DisplayPort
connector with cable included
ZR2440w Model
Display
Type
61.13 cm diagonal
TFT LCD
24.06 inches diagonal
20.41 x 12.76 inches
Viewable Image Size
51.84 x 32.4 cm
-5 to 35º
Tilt
Swivel
-45 to 45º
8.5 kg
Maximum Weight (Unpacked)
18.88 lbs.
Dimensions (including base)
Height (highest position)
Height (lowest position)
Depth
52.85 cm
42.85 cm
23.53 cm
56.24 cm
20.80 inches
16.87 inches
9.26 inches
22.14 inches
Width
Maximum Graphic Resolution
Optimum Graphic Resolution
Text Mode
1920 x 1200 (60 Hz)
1920 x 1200 (60 Hz)
720 x 400
Dot Pitch
0.2708 (W) x 0.2713 (H) mm
94
Pixels Per Inch
Horizontal Frequency
Vertical Refresh Rate
Environmental Requirements Temperature
24 – 80 kHz
24 – 60 Hz
5 to 35º C
41 to 95º F
-4 to 140º F
Operating Temperature
Storage Temperature
-20 to 60º C
Relative Humidity:
Operating
20 to 80%
5 to 95%
Storage
ZR2440w Model 31
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Source
100 – 240 VAC, 50/60 Hz
Altitude:
Operating
Storage
0 to 5000 m
0 to 16,400 feet
0 to 40,000 feet
0 to 12,192 m
Power Consumption (maximum)
Low-power mode
51 watts
0.5 watts
Input Terminal
One DVI connector with cable
included; one DisplayPort connector
with cable included; one HDMI
connector
ZR2740w Model
Display
Type
68.74 cm diagonal
TFT LCD
27 inches diagonal
Viewable Image Size
59.87 x 33.77 cm
-5 to 30º
23.57 x 13.29 inches
Tilt
Swivel
-45 to 45º
Maximum Weight (Unpacked)
10.3 kg
22.88 lbs.
Dimensions (including base)
Height (highest position)
Height (lowest position)
Depth
54.04 cm
44.04 cm
23.53 cm
64.6 cm
21.28 inches
17.34 inches
9.26 inches
25.43 inches
Width
Maximum Graphic Resolution
Optimum Graphic Resolution
Dot Pitch
2560 x 1440 (60 Hz)
2560 x 1440 (60 Hz)
0.2331 (W) x 0.2331 (H) mm
108
Pixels Per Inch
Horizontal Frequency
31.5 – 90 kHz
Vertical Refresh Rate
60 Hz
Environmental Requirements Temperature
5 to 35º C
41 to 95º F
-4 to 140º F
Operating Temperature
Storage Temperature
-20 to 60º C
Relative Humidity:
Operating
20 to 80%
5 to 95%
Storage
Power Source
100 – 240 VAC, 50/60 Hz
32 Appendix A Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Altitude:
Operating
Storage
0 to 5000 m
0 to 16,400 feet
0 to 40,000 feet
0 to 12,192 m
Power Consumption (maximum)
Low-power mode
120 watts
2 watts
Input Terminal
One DVI connector with cable
included; one DisplayPort connector
with cable included
Preset Display Resolutions
The display resolutions listed below are the most commonly used modes and are set as factory
defaults. The monitor automatically recognizes these preset modes and they will appear properly
sized and centered on the screen.
ZR2040w Model Preset Modes
Preset
Resolution (pixels)
Horizontal Frequency Refresh Rate (Hz)
(kHz)
1
2
3
4
5
6
7
8
640 x 480
720 x 400
800 x 600
1024 x 768
1280 x 720
1280 x 1024
1440 x 900
1600 x 900
31.469
31.469
37.879
48.363
45
59.94
70.087
60.317
60.004
59.94
60.02
59.887
60
63.981
55.935
60
Table A-2 ZR2040w High Definition Video Formats
Preset
Timing Name Pixel Format
Horz Freq
(kHz)
Vert Freq
(kHz)
Pixel Rate (MHz) OSD Display
1
2
3
4
480p
720 x 480
1280 x 720
720 x 576
1280 x 720
31.469
45
60
27
480p
720p60
576p
60
74.25
27
720p-60Hz
576p
31.25
37.5
50
720p50
50
74.25
720p-50Hz
ZR2240w Model Preset Modes
Preset
Pixel Format
Horizontal
Frequency (kHz)
Vertical Frequency
(Hz)
Preset Display Resolutions 33
Download from Www.Somanuals.com. All Manuals Search And Download.
1
640 x 480
31.469
31.469
37.879
48.363
45.00
60.0
59.940
70.087
60.317
60.004
59.94
2
720 x 400
3
800 x 600
4
1024 x 768
1280 x 720
1280 x 960
1280 x 1024
1440 x 900
1600 x 900
1680 x 1050
1920 x 1080
5
6
60.0
7
63.981
55.935
60.0
60.020
59.887
60.0
8
9
10
11
65.290
67.5
59.954
60.00
Table A-3 ZR2240w High Definition Video Formats
Preset
Timing Name
Pixel Format
Horz Freq
(kHz)
Vert Freq
(kHz)
Pixel Rate (MHz) OSD Display
1
2
3
4
5
6
7
8
9
10
480i
720 x 480
15.734
31.469
45
60
13.5
27
480i
480p
720 x 480
60
480p
720p60
1080i60
576i
1280 x 720
1920 x 1080
720 x 576
60
74.25
74.25
13.5
27
720p-60Hz
1080i-60Hz
576i
33.75
15.625
31.25
37.5
60
50
576p
720 x 576
50
576p
720p50
1080i50
1080p60
1080p50
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
50
74.25
74.25
148.5
148.5
720p-50Hz
1080i-50Hz
1080p-60Hz
1080p-50Hz
28.125
67.5
50
60
56.25
50
ZR2440w Model Preset Modes
Preset
Pixel Format
Horizontal Frequency Vertical Frequency
(kHz)
(Hz)
1
2
3
4
5
6
640 x 480
720 x 400
800 x 600
720 x 480
1024 x 768
1152 x 720
31.469
31.469
37.879
31.469
48.363
44.86
59.940
70.087
60.317
59.940
60.004
60.00
34 Appendix A Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
7
1280 x 720
1280 x 768
1280 x 800
1280 x 960
1280 x 1024
1366 x 768
1440 x 900
1440 x 900
1600 x 900
1600 x 1000
1600 x 1200
1680 x 1050
1920 x 1080
1920 x 1200
45.00
59.94
8
47.396
49.702
60.00
59.995
59.810
60.00
9
10
11
12
13
14
15
16
17
18
19
20
63.981
47.712
55.935
55.469
60.000
61.648
75.000
65.290
67.5
60.020
59.790
59.887
59.901
60.00
60.00
60.000
59.954
60.00
74.04
60.00
Table A-4 ZR2440w High Definition Video Formats
Preset
Timing Name
Aspect
Ratio
Pixel Format
Horz Freq
(kHz)
Vert
Freq
(Hz)
Pixel Rate
(MHz)
CEA
VIC
OSD Display
1a
1b
2a
2b
3
480i60
4:3
720 x 480
15.734
15.734
31.469
31.469
45
60
60
60
60
60
60
50
50
50
50
50
50
60
50
24
24
13.5
13.5
27
6
7
2
3
480i-60Hz
480i-60Hz
480p-60Hz
480p-60Hz
720p-60Hz
1080i-60Hz
576i-50Hz
576i-50Hz
576p-50Hz
576p-50Hz
720p-50Hz
1080i-50Hz
1080p-60Hz
1080p-50Hz
1080p-24Hz
1080p-24Hz
480i60
16:9
4:3
720 x 480
480p60
480p60
720p60
1080i60
576i50
720 x 480
16:9
720 x 480
27
1280 x 720
1920 x 1080
720 x 576
74.25
74.25
13.5
13.5
27
4
33.75
15.625
15.625
31.25
31.25
37.5
5a
5b
6a
6b
7
4:3
21
22
17
18
576i50
16:9
4:3
720 x 576
576p50
576p50
720p50
1080i50
1080p60
1080p50
1080p23.976
1080p24
720 x 576
16:9
720 x 576
27
1280 x 720
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
1920 x 1080
74.25
74.25
148.5
148.5
74.250
74.250
8
28.125
67.5
9
10
11
12
56.25
27.0
32
32
27.0
Preset Display Resolutions 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Table A-4 ZR2440w High Definition Video Formats (continued)
13
14
1080p25
1920 x 1080
1920 x 1080
28.125
33.750
25
30
74.250
74.250
33
34
1080p-25Hz
1080p-30Hz
1080p29.97
ZR2740w Model Preset Modes
Preset
Pixel Format
Horizontal Frequency Vertical Frequency
(kHz)
(Hz)
59.9
59.8
59.9
1
2
3
640 x 480
31.468
44.771
88.786
1280 x 720
2560 x 1400
Energy Saver Feature
In addition to normal operating mode, your monitor has a low-power, or "sleep" mode that uses less
than .5 watts and from which it will awaken with any signal input. The monitor will go to sleep
automatically when it stops receiving input, so putting your computer on a timer is one way to put the
monitor on a timer. Some models also have their own sleep timers. The power LED on the front panel
indicates the monitor's state: blue under full power, amber in sleep mode, and blinking amber on a
sleep timer.
NOTE: If your monitor has a master power switch (located on the rear of the monitor), putting the
switch in the Off position will yield the lowest power state for the monitor when not in use.
36 Appendix A Technical Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
|