HP Hewlett Packard Computer Hardware VLI 8 PC User Manual

16  
HP Vectra VLi 8 PC  
Models and Accessories  
Product  
Number  
Hard  
Drive  
Video  
Controller  
St d.  
RAM  
Multi-media  
LAN  
OS1  
Vectra VLi 8 PC  
Models with Intel Pentium II Processor,  
100MHz System Bus Speed, and 512 KB Level 2 Cache Memory  
HP Vectra VLi 8 PC 400/100 (CPL: 03/99  
)
D7941A/T 6.4 GB  
Integrated  
Matrox  
MGA-G200 AGP 100 MHz  
(8 MB SGRAM  
64 MB  
SDRAM  
no  
no  
W95  
NT  
IDE  
D7942A/T  
3COM  
3C905B- 4.0  
TX  
WS  
fitted, not  
D7943A/T 8.4 GB  
32 Max IDE  
no  
W95  
upgradeable)  
IDE  
CD-ROM  
D7944T  
6.4 GB  
IDE  
no  
NT  
4.0  
WS  
D7945A/T  
32 Max IDE  
CD-ROM  
16  
D8794A  
no  
DOS  
Vectra VLi 8 PC  
Models with Intel Pentium III Processor,  
100 MHz System Bus Speed, and 512 KB Level 2 Cache Memory  
HP Vectra VLi 8 PC 450/100 (CPL: 03/99  
)
D7951A/T 6.4 GB  
Integrated  
Matrox  
MGA-G200 AGP 100 MHz  
(8 MB SGRAM  
64 MB  
SDRAM  
no  
no  
W95  
NT  
IDE  
D7952A/T  
3COM  
3C905B- 4.0  
TX  
WS  
fitted, not  
D7953A/T 8.4 GB  
32 Max IDE  
no  
W95  
upgradeable)  
IDE  
CD-ROM  
D7954T  
6.4 GB  
IDE  
no  
NT  
4.0  
WS  
D7955A/T  
32 Max IDE  
CD-ROM  
Medium-Profile  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Desktop Vectras  
HP Vectra VLi 8 PC 16-1  
HP Vectra VLi 8 PC  
Input Devices  
HP Standard Keyboard  
HP Scrolling Mouse  
C4735A  
C4736A  
Video Displays  
All current HP Displays (see the HP Vectra Accessory Service Handbook)  
Mass Storage  
4.3-GB IDE hard disk  
D8371A  
D8372A  
D8373A  
D6650A  
D6651A  
6.4-GB IDE hard disk  
8.4-GB IDE hard disk  
HP 100 MB Atapi II Iomega ZIP drive  
HP 100 MB Atapi II Iomega ZIP drive (pack of 10)  
Multimedia  
32Max IDE CD-ROM drive (pack of 10)  
32Max IDE CD-ROM drive  
D6656A  
D4384A  
D5183A  
Multimedia sound accessory kit (16-bit audio board, cables, and software) -  
pack of 10  
Multimedia sound accessory kit (32Max CD-ROM drive, 16-bit audio  
D6657A  
board, headphones, cables, and software)  
16  
Data Communications and LAN Adapter Boards  
HP 56K V90 PCI Fax Modem  
D7808A  
D7504A  
D7505A  
D7506A  
D7507A  
HP 10/100 3Com 3C905B-TX, 10/100BT Ethernet card  
HP 10/100 3Com 3C905B-TX, 10/100BT Ethernet card (pack of 10)  
HP 10/100 Intel PRO/100+, 10/100BT Management adapter  
HP 10/100 Intel PRO/100+, 10/100BT Management adapter (pack of 10)  
Security  
HP Master Pass Key System Kit  
HP Master Pass Key  
D6655A  
D6658A  
D6659A  
HP Locks for Master Pass Key System (pack of 50)  
Medium-Profile  
Desktop Vectras  
HP Vectra VLi 8 PC 16-3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HP Vectra VLi 8 PC  
System Board, BIOS, and Memory  
System Board  
Switches: See the  
table on the next page.  
16  
Main Memory:  
Processor: Pentium II  
or Pentium III SECC2  
package with integrated  
heatsink and level-2  
cache memory.  
Two DIMM sockets which support  
up to a maximum of 512 MB.  
Install 32 MB, 64 MB, 128 MB or  
256 MB 100 MHz SDRAM modules.  
Medium-Profile  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16-4 HP Vectra VLi 8 PC  
Desktop Vectras  
HP Vectra VLi 8 PC  
System Board Switches  
Switch  
Function  
RESERVED — Do Not Use  
Default  
Off  
1
2
On  
Crash recovery mode: forces booting in the BIOS boot  
block area  
Off  
On  
Off  
On  
Normal operation  
Normal operation ( keyboard space-bar power-on  
enabled)  
3
Off  
On  
Off  
On  
Off  
Disables keyboard power- on  
Clears User and Administrator passwords  
Normal operation  
4
5
Off  
Off  
Clears CMOS (to reload the Setup program defaults)  
Normal operation  
6-9  
10  
Processor frequency, see the following table  
RESERVED — Do Not Use  
Off  
System Frequency1  
Switch  
6
7
8
9
Bus 100 MHz Bus 66 MHz  
350 MHz2  
400 MHz  
450 MHz  
500 MHz  
Reserved  
Reserved  
Reserved  
2332 MHz  
2662 MHz  
3002 MHz  
3332 MHz  
3662 MHz  
4002 MHz  
4332 MHz  
Off  
On  
Off  
On  
Off  
On  
Off  
On  
Off  
Off  
Off  
Off  
On  
On  
Off  
On  
On  
Off  
Off  
On  
On  
On  
On  
On  
On  
On  
Off  
Off  
16  
1.  
2.  
System and processor frequency is automatically determined by the type of processor.  
These options are not yet available in any model of the HP Vectra VLi 8 at the time of  
printing. This information is provided for completeness only.  
BIOS History  
For the latest BIOS, the flasher utility program, and the BIOS history refer to the  
HP World Wide Web site.  
Medium-Profile  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Desktop Vectras  
HP Vectra VLi 8 PC 16-5  
HP Vectra VLi 8 PC  
Part Numbers  
a
k
o
g
j
h
f
n
i
m
l
d
b
c
e
1
16  
8
6
2
5
10  
9
3
7
12  
11  
4
Medium-Profile  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16-6 HP Vectra VLi 8 PC  
Desktop Vectras  
HP Vectra VLi 8 PC  
Parts List for HP Vectra VLi 8 PC  
Item  
Description  
Repl.  
Exchange  
Part Number  
Part Number  
1
Box assembly:  
5064-9152  
a
b
c
d
e
f
g
h
i
j
k
l
m
n
o
p
Cover assembly  
Bezel assembly  
Status panel assembly  
Blank filler (5.25 inch)  
Blank filler (3.5 inch)  
CD frame rail  
I/O blank panel  
I/O locker  
AGP blank panel  
HDD, FDD and CD-ROM cable kit  
Master key lock  
Power supply  
Fan assembly  
Rear bezel  
Floppy disk drive (bezel-less)  
Airflow guide  
5064-7470  
5064-7471  
5064-9129  
5042-3073  
5042-3086  
5002-6213  
5002-3841  
5002-4795  
5002-6211  
5064-9135  
5064-2645  
0950-3472  
5064-9149  
5064-9127  
D2035-60391  
tbd  
not  
shown  
2
3
4
5
Battery type CR2032  
CD-ROM to audio connector cable  
Headphones  
1420-0356  
5182-1857  
5182-3552  
IDE hard disk drive 1  
16  
6.4 GB  
8.4 GB  
13.5 GB  
D8372-69001  
D8373-69001  
D8435-69001  
6
7
32 Max IDE CD-ROM drive  
Enhanced mouse with scroll/zoom wheel  
Standard keyboard  
D4385-69001  
C4736-60101  
C4735-603xx2  
C4732-60324  
C4734-605xx2  
5064-7455  
Standard keyboard (Japan)  
Multimedia keyboard  
8
Backplane board  
9
System board  
See PCs system board parts list  
10  
or  
11  
12  
3Com 3C905B-TX LAN board  
Intel PRO/100+ LAN board  
3COM Wake on LAN Cable  
Mini NLX board extractor  
5064-6787  
5064-7434  
5183-2769  
5064-9114  
1.  
2.  
For optional disk drive information, see the Accessory Service Handbook.  
Where xx” is the code for your national keyboard (see the Accessory Service Handbook).  
Medium-Profile  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Desktop Vectras  
HP Vectra VLi 8 PC 16-7  
HP Vectra VLi 8 PC  
System Board Parts List for HP Vectra VLi 8 PC  
Description  
Repl.  
Exchange  
Part Number  
Part Number  
System board:  
Vectra VLi 8 system board with Matrox  
MGA-G200 video controller and audio  
subsystem  
D4066-69001  
Processors ( SECC2 package) :  
Intel Pentium II 400/100 512KB L2 cache  
Intel Pentium III 450/100 512KB L2 cache  
Intel Pentium III 500/100 512KB L2 cache  
Main memory modules:  
D7645-69001  
D7946-69001  
D7957-69001  
1 64-MB, 100 MHz noon-ECC SDRAM  
D6502-63001  
Manuals and Documentation for HP Vectra VLi 8 PC  
Users Guide Manual Kit  
D7940A  
1
Troubleshooting and Upgrade Guide  
no number  
no number1  
Technical Reference Manual: hardware and BIOS  
1.  
Electronic file available on HPs Web site.  
Notes:  
16  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
____________________________________________________________________  
Medium-Profile  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16-8 HP Vectra VLi 8 PC  
Desktop Vectras  
2 How to Install and Replace Components In Your Desktop PC  
Removing and Replacing the Cover  
Removing and Replacing the Cover  
Removing the Cover  
1 Switch off the monitor and PC, disconnect all power cords and any  
telecommunication cables.  
2 If necessary, unlock the cover (with the key) at the rear of the PC.  
3 Open the rear catches and remove the cover .  
4 Remove the front panel.  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Removing and Replacing the Cover  
Replacing the Cover  
1 Ensure that all internal cables are properly connected and safely  
routed.  
2 Replace the front panel.  
3 Lower the cover and slide it into position.  
4 If required, lock the cover (with the key) at the rear of the PC.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
The Label Inside Your PC  
The Label Inside Your PC  
Inside, your PC contains a label that can be used as a simplified guide  
to help you install accessories and replace components.  
Shows how to remove  
Shows how to  
remove the hard  
disk drive  
the system board  
(step 1 does not apply to  
your PC model)  
Shows how to add an  
accessory board  
Shows how to remove  
the floppy drive  
Shows how to remove  
the front drive bay  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading the Main Memory  
Upgrading the Main Memory  
NOTE  
Use only HP memory modules provided for your PC model. The use of  
other memory modules is not supported. For information about  
supported HP accessories, connect to the web site  
You can install up to a total of 512 MB (two 256 MB modules). Main  
memory is available in 100 MHz modules of 32 MB, 64 MB, 128 or  
256 MB. (Although the 256 MB memory modules are ECC, the ECC  
feature is not used by this PC.)  
Location of Main Memory  
(modules can be installed in  
either slot)  
1 Remove the PCs cover (described in this chapter).  
2 Line up the two side notches correctly and insert the new memory  
module. (You can use either slot.)  
3 Replace the cover (described in this chapter).  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
Upgrading and Installing Mass Storage Devices  
Drive Connectors  
Internal drives, such as hard disk drives, DVD drives, and CD-ROM  
drives, must be connected to data and power cables. When replacing  
these drives, ensure you use the correct data and power connectors.  
(you can use  
either connector)  
Master (boot) hard disk drive  
2nd hard disk drive  
CD-ROM, DVD or Zip drive  
Floppy drive  
Power Connectors  
Number  
Use for  
Hard disk drives, DVD drives,  
CD-ROM drives, Zip drives  
5
(3 devices max.)  
Floppy disk drive  
1
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
Which Data Connectors There are three data cables inside your PC. Two of these are for IDE  
devices.  
to Use  
An Enhanced Ultra ATA IDE (Integrated Drive Electronics) hard  
disk drive cable.  
For optimum performance, use this cable to connect the Ultra ATA  
IDE hard disk drive.  
A second IDE drive cable that supports two IDE devices. If you  
install a CD-ROM drive, a DVD drive or a Zip drive, connect it to this  
cable.  
The third cable is non-IDE and has one connector for a floppy drive.  
Up to three IDE devices can be connected to the system board using  
the IDE data cables.  
Before Installing an IDE Refer to the drives installation guide to see if you must set jumpers or if  
there is a special installation procedure to follow.  
Hard Disk  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
Upgrading the Hard Disk Drive  
CAUTION  
Handle the hard disk drive with care. Avoid shocks and violent  
movement as this can cause damage to the hard disk drives internal  
components.  
Make sure that you back up your files before you install a hard disk  
drive. Refer to your operating system documentation for information on  
how to do this.  
You can replace your PCs hard disk drive with a larger one. To do this:  
1 Remove the computers cover (described in this chapter).  
2 Remove the drives connectors.  
3 Remove the retaining screw and slide out the drive tray .  
4 Loosen the trays four screws and remove the old hard drive.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
5 Align the new hard drive in the tray (with the correct orientation)  
and tighten the screws.  
6 Replace the drive tray and retaining screw .  
7 Attach the data and power connectors.  
8 Replace the cover (described in this chapter).  
9 Verify the new configuration by checking the HP Summary Screen.  
To access the HP Summary Screen, press Escwhen the Vectra logo  
appears during startup.  
NOTE  
Ensure that you have installed all the required operating system and HP  
drivers on the newly installed drive. To reinstall operating system and  
HP drivers, use the Diagnostics & Recovery CD-ROM provided with  
the PC. In addition, you can find the most up-to-date versions of HP  
drivers on HPs Web site at: www.hp.com/go/vectrasupport.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
Installing a Second Hard Disk Drive  
CAUTION  
Handle the hard disk drive with care. Avoid shocks and violent  
movement as this can cause damage to the hard disk drives internal  
components.  
Make sure that you back up your files before you install a hard disk  
drive. Refer to your operating system documentation for information on  
how to do this.  
You can install a second hard disk drive in the lower front shelf of your  
desktop PC.  
1 Remove the computers cover (described in this chapter).  
2 If there is already a drive installed in the front bay, remove its power  
and data connectors (so that you can remove the drive bay).  
3 Pull out the sliding latch and remove the drive bay .  
4 Align the new device in the bay (with the correct orientation) and  
secure it with the screws provided.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
5 Slide the drive bay back into the PC (ensuring the bottom catches  
engage properly) and replace the sliding latch.  
6 Attach all data and power connectors.  
7 Replace the cover (described in this chapter).  
8 Verify the new configuration by checking the HP Summary Screen.  
To access the HP Summary Screen, press Escwhen the Vectra logo  
appears during startup.  
NOTE  
Ensure that you have installed all the required operating system and HP  
drivers on the newly installed drive. To reinstall operating system and  
HP drivers, use the Diagnostics & Recovery CD-ROM provided with  
the PC. In addition, you can find the most up-to-date versions of HP  
drivers on HPs Web site at: www.hp.com/go/vectrasupport.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
Installing Removable Media Devices  
The PC has an integrated Enhanced IDE controller which supports up  
to four IDE devices. Removable media IDE devices, such as CD-ROM  
drives, DVD drives, tape drives and Zip drives, require front access.  
You can install a removable media IDE drive in an empty front shelf.  
Refer to the drives manual to see if you must set jumpers or if there is  
a special installation procedure to follow.  
1 Remove the computers cover (described in this chapter).  
2 If there is already a drive installed in the front bay, remove its power  
and data connectors (so that you can remove the drive bay).  
3 Pull out the sliding latch and remove the drive bay .  
4 Align the new device in the bay (with the correct orientation) and  
secure it with the screws provided.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
5 Slide the drive bay back into the PC (ensuring the bottom catches  
engage properly) and replace the sliding latch.  
6 Attach all data and power connectors. If you are installing a CD-ROM  
or DVD drive, connect the audio cable too.  
Audio  
Connector  
(optional)  
7 Replace the cover (described in this chapter).  
8 Verify the new configuration by checking the HP Summary Screen.  
To access the HP Summary Screen, press Escwhen the Vectra logo  
appears during startup.  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Upgrading and Installing Mass Storage Devices  
Configuring an IDE Device After Installation  
After installing any device, you will need to verify that your PC has  
correctly identified the new configuration, by viewing the HP Summary  
Screen. If the configuration is not correct, run the Setup program to  
configure the device. To enter the Setup program, press F2during  
startup.  
IDE drives are automatically detected by the Setup program. However,  
a newly installed device may require that you install an appropriate  
device driver. Refer to your operating system documentation for  
details. You can obtain the latest drivers from HPs Web site at:  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Replacing the Floppy Drive  
Replacing the Floppy Drive  
1 Remove the computers cover (described in this chapter).  
2 Remove the drives connectors.  
3 Lift the latch and slide out the floppy drive tray .  
4 Remove the trays screws and remove the old floppy drive.  
5 Align the new floppy drive in the tray (with the correct orientation)  
and replace the screws.  
6 Slide the floppy drive tray back into the PC.  
7 Attach the data and power connectors.  
8 Replace the cover (described in this chapter).  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing Accessory Boards  
Installing Accessory Boards  
Accessory Board Slots  
The PC has four accessory board slots.  
NOTE  
Use only XT format ISA accessory boards (width less than 10.4 cm or  
4.09 inches).  
Accessory Board Connectors  
PCI 2  
PCI 3  
PCI 4  
Physical Slot 1  
Physical Slot 2  
Physical Slot 3 (Combo)  
Physical Slot 4  
ISA 1  
ISA 2  
{
Physical slot 1 (the top slot) can be used for a full-length 32-bit PCI  
board.  
Physical slot 2 can be used for a full-length 32-bit PCI board.  
Physical slot 3 is a combo slot and can be used either for a full-length  
32-bit PCI or a full-length XT format 16-bit ISA board.  
Physical slot 4 (the bottom slot) can be used for a full-length XT  
format 16-bit ISA board.  
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing Accessory Boards  
Installing an Accessory Board  
NOTE  
Use only XT format ISA accessory boards (width less than 10.4 cm or  
4.09 inches).  
1 Remove the computers cover (described in this chapter).  
2 Remove the retaining bracket.  
3 If the selected accessory board slot is located behind the processor,  
you may need to slide out the system board to allow access (refer to  
see Replacing the System Board” on page 72 for information on how  
to do this).  
4 Remove the slot cover.  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing Accessory Boards  
5 Aligning the board carefully, slide it into position and press it firmly  
into the slot.  
6 If you slid out the system board to allow access to a lower slot,  
replace it.  
7 Replace the retaining bracket.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing Accessory Boards  
8 The accessory board may need a special connection, such as:  
WOL (Wake on LAN) connector to the Network board.  
CD-ROM drive to the sound board (if you no longer want to use  
the integrated audio).  
Integrated Audio Connector  
If you install an add-on sound  
board, remove the cable in this  
connector and insert it into the  
sound board’s connector.  
WOL Connector  
For more information, refer to the documentation that came with  
the accessory board. The necessary cables are usually provided with  
the accessory board.  
NOTE  
If you install a network board and connect it to the WOL connector, you  
must enable the Suspend Wake-Up/Integrated Networkand/or  
Integrated Networkfields in the Powermenu of the PCs Setup  
program. This only applies if the network board supports these modes.  
To enter the Setup program, press F2 during startup.  
If you install an add-on sound board (and you no longer want to use the  
integrated audio), you must set the Integrated Audio Interfacein  
the Advancedmenu of the Setup program to Disabled.  
9 Replace the cover (described in this chapter).  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing Accessory Boards  
Configuring Accessory Boards with Plug and Play  
Plug and Play is an industry standard for automatically configuring  
your PC's hardware resources and the accessory boards installed in it.  
Your PC has configurable support for Plug and Play in the BIOS.  
All PCI accessory boards are Plug and Play, although not all ISA boards  
are. Check the accessory boards documentation if you are unsure.  
When you start your PC after installing an accessory board, the Plug  
and Play BIOS automatically detects which hardware resources (IRQs,  
DMAs, memory ranges, and I/O addresses) are used by PC components  
(such as the keyboard, the communications ports, network adapters,  
and accessory boards).  
Windows 95 and  
Windows 98  
Operating systems that support Plug and Play, such as Windows 95 and  
Windows 98, will automatically detect a newly installed Plug and Play  
accessory board and install the driver for this device, if the driver is  
available.  
Windows NT 4.0  
For operating systems that do not support Plug and Play, such as  
Windows NT 4.0, refer to the operating system documentation for  
information about installing accessory boards.  
In Windows NT 4.0, click the Start button then click Help. You can  
use the contents or index to find information about installing devices.  
Windows NT 4.0 helps you through the installation of devices such as  
modems and sound boards.  
NOTE  
After installing a new device in Windows NT 4.0, you must re-install the  
Microsoft Service Pack to update the operating system for your PC.  
To do this, click the Start button then select Programs – Windows  
NT Update.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing Accessory Boards  
Configuring non-Plug and Play ISA Accessory Boards  
If you install an ISA accessory board that is not Plug and Play, you will  
need to configure the board before your PC can use it. For instructions  
about configuring the board, refer to the documentation that came  
with the board.  
For guidelines on available IRQs and I/O addresses in your PC, refer to  
page 119. Some operating systems, such as Windows 95, can display  
the IRQs and I/O addresses currently used by your PC. Refer to the  
operating system documentation for more information.  
Refer to the documentation supplied with the operating system for  
details on your operating systems capabilities and restrictions  
concerning non-Plug and Play accessory boards.  
Resetting the PC’s  
Configuration Data  
If your PC is having difficulty recognizing the ISA board, try resetting  
the PCs data configuration. This will clear any old configuration data  
that is no longer used. To do this, enter the PCs Setup program, set the  
Reset Configuration Data parameter to Yes, and restart the PC.  
To enter the Setup program, press F2during startup.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Replacing the Processor  
Replacing the Processor  
1 Remove the computers cover (described in this chapter).  
2 Remove the old processor.  
3 Install the new processor and clip it into place.  
4 If the new processor is a different speed, ensure that the system  
board switches are correctly set for your processor speed. (The  
correct switch settings are indicated on the system board.)  
5 Replace the cover (described in this chapter).  
6 Ensure that the latest version of BIOS is installed on your PC. To  
learn which version of BIOS is currently installed on your PC, press  
ESCduring startup. To get the latest BIOS version for your PC,  
connect to the web site www.hp.com/go/vectrasupport.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Replacing the System Board  
Replacing the System Board  
1 Remove the computers cover (described in this chapter).  
2 Remove the lower bracket.  
3 Remove the main memory and processor from the old system board  
(described in this chapter).  
4 Remove the old system board.  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Replacing the System Board  
5 First ensure the lever is open, then carefully slide in the new system  
board, aligning the rails and the rear connector bracket correctly.  
6 Pushing on the lever and on the system board edge, slide the system  
board firmly into place. Ensure the connectors are well aligned and  
fully engaged.  
7 Replace the main memory and processor in the new system board  
(described in this chapter).  
8 Replace the lower bracket.  
9 Replace the cover (described in this chapter).  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Replacing the Power Supply  
Replacing the Power Supply  
WARNING  
To avoid electric shock, do not open the power supply. There are no user-  
serviceable parts inside.  
1 Remove the computers cover (described in this chapter).  
2 Remove all internal power supply connectors.  
Hard drive(s)  
Main power  
(located on backplane near  
power supply)  
DVD/CD-ROM  
drive(s)  
Floppy drive  
3 Remove the hard drive tray (described in this chapter).  
4 Remove the four screws securing the power supply.  
5 Slide the old power supply forward and remove it.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Replacing the Power Supply  
6 Insert the new power supply (lining up the metal catches).  
7 Replace the four screws to secure the power supply.  
8 Re-install the hard drive tray (described in this chapter).  
9 Reconnect all internal power supply connectors.  
10 Replace the cover (described in this chapter).  
11 Select the correct voltage setting for your country.  
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Changing the Battery  
Changing the Battery  
WARNING  
There is a danger of explosion if the battery is incorrectly installed. For  
your safety, never attempt to recharge, disassemble, or burn the old  
battery. Replace the battery only with the same or equivalent type  
recommended by the manufacturer. The battery in this PC is a lithium  
battery which does not contain heavy metals, nevertheless, in order to  
protect the environment, do not dispose of batteries in household  
waste. Please return used batteries to the shop from which you bought  
them, or to the dealer from which you purchased your PC, or to HP, so  
that they can either be recycled or disposed of in an environmentally  
sound way. Returned used batteries will be accepted free of charge.  
You should order replacement battery HP 1420-0356 from your local  
Sales and Service office, or a “CR2032 type” battery, which is available  
from most local stores.  
After removing the computers cover:  
1 Remove the old battery by pressing the retaining clip with a  
screwdriver and lifting the battery clear of the battery holder.  
2 Place the new battery in the battery holder, with the +“ sign on top,  
and ensure it is properly seated.  
After installing a replacement battery, replace the computers cover  
and run the Setup program to reconfigure the computer. You enter  
Setup by pressing F2at startup.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing a Security Cable  
Installing a Security Cable  
You can secure the PC to your desk, or any other fixed object, using a  
KensingtonTM security cable. Using a security cable will also lock the  
cover onto the PC.  
The PC has a slot at the rear for securing the cable.  
1 Insert the lock into the slot located at the rear of the PC.  
2 Turn the key to lock the cable to the PC.  
3 Remove the key and store it in a safe place.  
NOTE  
The KensingtonTM security cable is not an HP accessory. It cannot be  
ordered from HP. Contact your reseller for more information.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
2 How to Install and Replace Components In Your Desktop PC  
Installing a Security Cable  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Graco High Chair 3165 User Manual
Hamilton Beach Oven 31160 User Manual
Hans Grohe Plumbing Product 06462XXX User Manual
Harbor Freight Tools Router 43585 User Manual
Honeywell Automobile Electronics 6160rf User Manual
Hotpoint Freezer FZA31 User Manual
Hotpoint Range RGB52524ER User Manual
HP Hewlett Packard Music Mixer EPM 442A User Manual
Husqvarna Lawn Mower 323R User Manual
i Tech Dynamic Headphones Buzzer Clip User Manual