HP Hewlett Packard All in One Printer PSC 2100 User Manual

hp psc 2100 series  
all-in-one  
reference guide  
Download from Www.Somanuals.com. All Manuals Search And Download.  
contents  
clean the exterior. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
work with print cartridges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26  
restore factory defaults . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29  
set the power save time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
set scroll speed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
set the prompt delay time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
contents  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp psc 2100 series  
7 additional setup information . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
warranty service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
warranty upgrades. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51  
returning your hp psc 2100 series for service . . . . . . . . . . . . . . . . . . 51  
hewlett-packard limited global warranty statement . . . . . . . . . . . . . . . .52  
index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
contents  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
get help  
help  
description  
Setup Poster  
The Setup Poster provides instructions for setting up and configuring your  
HP PSC. Make sure you use the correct poster for your operating system  
(Windows or Macintosh).  
Product Tour  
The tour provides a brief introduction to the HP PSC and its capabilities, so  
you can start using it immediately. You can take the tour immediately after  
installing the HP PSC software, or to take the tour at any time, see the  
product specific online help.  
HP Photo & Imaging The HP Photo & Imaging Help provides detailed information on using the  
Help  
software for your HP PSC.  
For Windows users: Go to the HP Director, and click Help.  
For Macintosh users: Go to the HP Director, and click Help, then click hp  
photo & imaging help.  
Reference Guide  
The Reference Guide contains information on using your HP PSC and  
provides additional troubleshooting assistance for the installation process.  
The Reference Guide also contains information on how to order supplies  
and accessories, technical specifications, support, and warranty  
information.  
Troubleshooting help To access troubleshooting information, go to the HP Director, then click  
Help. Open the Troubleshooting book in the HP Photo & Imaging Help,  
then follow the links to general troubleshooting as well as links to  
Troubleshooting help that is specific to your HP PSC. Troubleshooting is  
also available from the Help button that appears on some error messages.  
If you have Internet access, you can get more information from the  
HP website at:  
Internet help and  
technical support  
The website also provides answers to frequently-asked questions.  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
hp psc 2100 series  
help  
description  
Readme file  
After you install your software, you can access the Readme file from either  
the HP PSC 2100 Series CD-ROM or the HP PSC 2100 Series program  
folder. The Readme file contains late-breaking information that does not  
appear in the Reference Guide or the online help. To access the Readme  
file, do the following:  
For Windows: go to the Windows taskbar, click Start, point to Programs  
or All Programs (XP), point to Hewlett-Packard, point to HP PSC  
2100 Series, and then choose View the Readme File.  
For Macintosh: go to the  
HD:Applications:HP PSC Software folder.  
Dialog-box help  
(Windows only)  
For Windows: Clicking Help in a dialog box displays information about  
options and settings within the dialog box.  
To get help while working in a dialog  
box, click Help.  
get help  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
quick start  
You can perform many functions using either the front panel or the HP PSC  
software.  
Even if you do not connect your HP PSC to a computer, you can use the front  
panel to copy documents or photos. You can change a wide variety of  
settings using the front-panel buttons and menu system.  
front panel  
features  
Review the illustrations below and identify the location of the buttons on the  
front panel. You will not use all of the front-panel features in the tutorial, but  
you may find it helpful to note the locations of all the buttons.  
1
7
8
2
9
10  
3
4
11  
12  
13  
5
6
feature  
purpose  
1
Copy Options: use to access copy options, such as paper type, paper size,  
reduce/enlarge options, and lighter/darker options.  
2
On: turns the HP PSC on and off.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
hp psc 2100 series  
feature  
purpose  
3
Setup: use to access menu options such as Scan Setup, Print Report, and  
Maintenance.  
4
5
Left Arrow: use to scroll through menu settings or options.  
Copies (1-99): use to change the number of copies for this copy job. This  
button can be used in conjunction with the arrow keys to change the  
number of copies.  
6
7
Start Copy - Black: use to start a black and white copy.  
Front-panel display: use to view system prompts and messages.  
Cancel: use to stop a job, exit a menu, or exit button settings.  
Right Arrow: use to scroll through menu settings or options.  
Enter: use to select or save the displayed setting.  
8
9
10  
11  
12  
Quality: use to select the quality of the copy from Best, Normal, or Fast.  
Start Scan: use to start the scan of an original from the glass to the  
designated Scan To destination on your Windows or Macintosh computer,  
if the HP PSC software is installed. If no change was made to the Scan To  
destination, the image will be scanned to the HP Photo & Imaging Gallery  
(Windows) or HP Scan Window (Macintosh).  
13  
Start Copy - Color: use to start a color copy.  
use your hp psc with a computer  
If you installed the HP PSC software on your computer according to the  
Setup Poster, you can access all the features of the HP PSC using the  
HP Director.  
review the  
The HP Director is available through the desktop shortcut or when the  
HP PSC lid is raised (Windows only).  
hp photo &  
imaging director  
for windows users  
1
Do one of the following:  
Double-click the hp director icon on the desktop.  
In the Windows taskbar, click Start, point to Programs or All  
Programs (XP), point to Hewlett-Packard, point to hp psc 2000  
series, then choose hp photo & imaging director.  
Raise the lid of the HP PSC.  
This options works only if the HP PSC software is running.  
2
3
In the Select Device box, click to see a list of installed HP devices  
supported by this software.  
Select hp psc 2100.  
quick start  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
               
hp psc 2100 series  
The Director displays only the buttons that are appropriate for the  
selected device.  
1
2
8
3
4
5
6
7
the hp photo & imaging director  
feature  
purpose  
1
2
3
4
5
6
Select Device: Use this feature to select the product you want to use from  
the list of installed HP products.  
Settings: Use this feature to view or change various settings for your HP  
device, such as print, scan, copy, or image unload.  
Make Copies: Displays the Copy dialog box where you can select the copy  
quality, the number of copies, the color, the size, and can start a copy.  
Scan Picture: Scans an image and displays it in the HP Photo & Imaging  
Gallery.  
Scan Document: Scans text and displays it in the selected destination text  
editing software program.  
View & Print: Displays the HP Photo & Imaging Gallery, where you can  
view and edit images, use HP Creative Printing, make and print a photo  
album, e-mail an image, and unload an image to the Web.  
7
8
Help: Provides access to HP Photo & Imaging Help, which provides  
software help, a product tour, and troubleshooting information.  
Click this arrow to access tool tips, which explain each of the Director  
options.  
use your hp psc with a computer  
Download from Www.Somanuals.com. All Manuals Search And Download.  
5
hp psc 2100 series  
for macintosh users  
Do one for the following:  
!
For OS 9, double-click the HP Director icon on the desktop.  
For OSX, double-click the HP Director icon on the dock.  
The following figure shows some of the features available through the  
HP Director for Macintosh. Consult the legend for a brief explanation of a  
specific feature.  
1
2
3
4
5
6
7
8
the director for macintosh  
purpose  
feature  
1
2
3
Unload Images: Unloads images from a photo card.  
Scan Picture: Scans an image and displays it in the HP Imaging Center.  
Scan Document: Scans text and displays it in the selected destination text  
editing software program.  
4
Use this pull-down list to select the product you want to use from the list of  
installed HP products.  
5
6
7
8
Copy: Copies in black and white or color.  
Maintain Printer: Starts the printer utility.  
Settings: Provides access to device settings.  
View and Print: Displays the HP Imaging Gallery, where you can view and  
edit images.  
quick start  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
load originals and  
load paper  
You can make copies from originals loaded on the glass. You can also print  
and copy onto a variety of paper types, weights, sizes, and transparency  
films. It is important, however, that you choose the right paper and make  
sure that it is loaded correctly and not damaged.  
load originals  
You can copy or scan any original by placing it on the glass.  
Many of the Reduce/Enlarge options, such as Fit to  
Page or Poster, will not work correctly if the glass  
and lid backing are not clean. For more information,  
see clean the glass and clean the lid backing on  
page 25.  
1
Lift the lid and place the original face down on the glass in the front-  
right corner with the sides of the originals touching the right and  
bottom edges.  
It is important to use the front-right corner when using the copy feature.  
Tip! If you are copying from a transparency (that is, your  
original is printed on transparency film), place a blank piece  
of paper on top of the transparency.  
load originals  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
lid  
Top edge of  
original  
2
Close the lid.  
load paper  
Following is the basic procedure for loading paper. There are specific  
considerations for loading certain types of paper, transparency film,  
postcards, and envelopes. After you review this procedure, see tips for  
loading other types of paper in the paper tray on page 12, load envelopes  
on page 10, and load postcards or hagaki cards on page 11.  
For best results, adjust the paper settings each time you change paper types  
or paper sizes. For more information, see set the paper type on page 13.  
to load the paper tray  
1
Remove the output tray, and slide the paper-width and paper-length  
guides to their outermost positions.  
load originals and load paper  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
hp psc 2100 series  
2
3
Tap the stack on a flat surface to align the edges of the paper, and  
then check the paper for the following:  
Make sure it is free of rips, dust, wrinkles, and curled or bent  
edges.  
Make sure all the paper in the stack is the same size and type,  
unless you are working with photo paper.  
Insert paper into the paper tray print-side down until it stops. If you are  
using letterhead, insert the top of the page first.  
Be careful not to use too much or too little paper. Check that the stack  
of paper contains several sheets but is no higher than the top of the  
paper-length guide.  
4
Slide the paper-width and paper-length guides in until they stop at the  
edges of the paper. Make sure that the paper stack lies flat in the  
paper tray and fits under the tab of the paper-length guide.  
5
Replace the output tray.  
load paper  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp psc 2100 series  
6
To prevent printed paper from falling off the tray, fully extend the  
output-tray extender.  
load envelopes  
Use the print feature of your software to print to envelopes with your HP PSC.  
Your HP PSC provides two methods for working with envelopes. Donot use  
shiny or embossed envelopes, or envelopes that have clasps or windows.  
If you are printing one envelope, slide the envelope into the envelope  
slot, which is located on the right side toward the back of the output  
tray. Insert the envelope with the flap up and on the left, as shown in  
the illustration. Slide the envelope on the top until it stops.  
If you are printing multiple envelopes, remove all paper from the  
paper tray, and then slide a stack of envelopes into the tray, with the  
envelope flaps up and to the left (print-side down), until they stop.  
load originals and load paper  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
hp psc 2100 series  
Adjust the paper-width guide against the envelopes (be careful not to  
bend the envelopes). Make sure the envelopes fit within the tray (do  
not overload it).  
Consult the help files in your word processing software for details on  
how to format text for printing on envelopes.  
load postcards or hagaki cards  
Following is the procedure for loading postcards or hagaki cards.  
1
Remove all paper from the paper tray, and then slide a stack of cards  
into the tray until they stop.  
Make sure the print side faces down.  
2
Adjust the paper-width guide against the cards, and then slide the  
paper-length guide in until it stops.  
Make sure the cards fit within the tray (do not overload it).  
load photo paper  
Following is the procedure for loading 4-by-6 inch photo paper.  
1
Remove all paper from the paper tray, and then slide a stack of cards  
into the tray until they stop.  
Make sure the print side faces down.  
If the photo paper you are using has perforated tabs, load the photo  
paper so that the tabs are closest to you.  
load postcards or hagaki cards  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
2
Adjust the paper-width guide against the cards, and then slide the  
paper-length guide in until it stops.  
Make sure the cards fit within the tray (do not overload it).  
tips for loading other types of paper in the paper tray  
The following table provides guidelines for loading certain types of paper  
and transparency film. For best results, adjust the paper settings each time  
you change paper types and paper sizes. For more information, see set the  
paper type on page 13.  
paper  
tips  
• HP Premium Inkjet Paper: Locate the gray arrow on the nonprinting side  
of the paper, and then insert paper with the arrow side facing up.  
HP papers  
• HP Premium or Premium Plus Photo Paper: Load the glossy (print) side  
down. Always load at least five sheets of regular paper in the paper  
tray first, and then place the photo paper on top of the regular paper.  
• HP Premium or Premium Plus Inkjet Transparency Film: Insert the film so  
that the white transparency strip (with arrows and the HP logo) is on  
top and is going into the tray first.  
• HP Inkjet T-Shirt Transfer Iron-On: Flatten the transfer sheet completely  
before using it; do not load curled sheets. (To prevent curling, keep  
transfer sheets sealed in the original package until you are ready to use  
them.) Manually feed one sheet at a time, with the unprinted side  
facing down (the blue stripe faces up).  
• HP Greeting Cards, HP Linen Greeting Cards, or HP Felt-Textured  
Greeting Cards: Insert a small stack of HP greeting-card paper, with  
the print-side down into the paper tray until it stops.  
• Always use letter-size or A4-size label sheets designed for use with  
HP inkjet products (like Avery Inkjet Labels), and make sure that the  
labels are not over two years old.  
Labels  
(works only with  
printing)  
• Fan the stack of labels to make sure none of the pages are sticking  
together.  
• Place a stack of label sheets on top of standard paper in the paper  
tray, print-side down. Do not insert labels one sheet at a time.  
Postcards or hagaki  
cards (only works  
with printing)  
Insert a stack of postcards or hagaki cards with the print-side down into  
the paper tray until it stops. Line the postcards up on the right side of the  
paper tray, slide the paper-width guide up against the left side of the  
cards, and then slide the paper-length guide in until it stops.  
load originals and load paper  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
hp psc 2100 series  
paper  
tips  
4-by-6 inch photo  
paper (works only  
with printing)  
Insert the photo paper with the print-side down into the paper tray until it  
stops. Place the long edge of the photo paper against the right side of the  
paper tray, slide the paper-width guide up against the long edge of the  
photo paper, and slide the paper-length guide in until it stops. If the photo  
paper you are using has perforated tabs, load the photo paper so that the  
tabs are closest to you.  
Continuous (banner) Continuous banner paper is also known as computer or z-fold paper.  
paper  
(works only with  
printing)  
• Before loading banner paper, remove all other paper from the paper  
tray, then remove the output tray.  
Remove the output  
tray.  
Insert the unattached  
edge of the paper into  
the paper tray.  
• If you use non-HP banner paper, use 20-lb. paper and fan the paper  
before loading it.  
• Verify that the stack of banner paper contains at least five pages in the  
stack.  
• Carefully tear off the perforated edge strips from both sides of the  
paper stack, if any, and unfold and refold the paper to make sure the  
pages do not stick together.  
• Put the paper in the paper tray so that the unattached edge is at the  
top of the stack. Insert the first edge into the paper tray until it stops, as  
shown in the illustration above.  
set the paper type  
If you want to use a different type of paper, such as photo paper,  
transparency film, t-shirt transfer paper, or brochures, simply load that paper  
in the paper tray. You should then change the paper type settings to ensure  
the best print quality.  
HP recommends paper type settings according to the type of paper you’re  
using.  
This setting refers to copy options only. If you want to set the paper type for  
printing, set the properties from the Print dialog box.  
1
2
Press Copy Options until Paper Type appears, then press Enter.  
Press until the appropriate paper type appears.  
set the paper type  
Download from Www.Somanuals.com. All Manuals Search And Download.  
13  
         
hp psc 2100 series  
3
Press Enter to choose the displayed paper type.  
set the paper size  
The HP PSC can use Letter or A4 paper. Use the following procedure to set  
the paper size for copying.  
1
2
3
Press Copy Options until Paper Size appears, then press Enter.  
Press until the appropriate paper size appears.  
Press Enter to choose the displayed paper size.  
load originals and load paper  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
   
use the copy features  
The copy features let you do the following:  
Produce high-quality color and black-and-white copies using a variety  
of paper types and sizes, including iron-on transfers.  
Reduce or enlarge the size of the copies you make from 25% to 400%  
of the copy’s original size.  
Make the copy lighter or darker, adjust the color intensity, select the  
number of copies, and specify the quality of the copies you make.  
Use special copying features to create a poster, make many sizes of  
photos, make high-quality copies of photos using special photo paper,  
or to create transparencies.  
make copies  
You can make copies using the front panel of your HP PSC or by using the  
HP PSC software on your computer. Many copy features are available using  
either method. However, you may find that the software offers easier access  
to special copy features.  
All copy settings that you select on the front panel are resetwt o minutes after  
the HP PSC completes the copy, unless you save the settings as the default  
settings, as described in change settings for all copy tasks on page 17.  
make a copy  
1
2
Load your original on the glass.  
Press Start Copy, Black or Start Copy, Color.  
make copies  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
hp psc 2100 series  
increase copy  
speed or quality  
The HP PSC provides three options that affect copy speed and quality.  
Best produces the highest quality for all paper and eliminates the  
banding (striping) effect that sometimes occurs in solid areas. Best  
copies more slowly than the other quality settings.  
Normal delivers high-quality output and is the recommended setting  
for most of your copying. Normal copies faster than Best.  
Fast copies faster than the Normal setting. The text is of comparable  
quality to the Normal setting, but the graphics may be of lower  
quality. Using Fast also cuts down on the frequency of replacing your  
print cartridges, because it uses less ink.  
1
2
3
Load your original on the glass.  
Press Quality until the green light in front of the desired quality is lit.  
Press Start Copy, Black or Start Copy, Color.  
set the number  
of copies  
You can set the number of copies using the front panel.  
1
Do one of the following:  
Press Copies (1-99) until the desired number of copies appears.  
Press Copies (1-99), then press  
copies.  
or  
to select the number of  
If you hold down the right arrow button, the number of copies  
changes by increments of 5 to make it easier to set a large number  
of copies.  
2
Press Start Copy, Black or Start Copy, Color.  
reduce or  
enlarge a copy  
You can reduce or enlarge a copy of an original using Reduce/Enlarge.  
For more information about additional copy options such as Fit to Page,  
Many on a Page, and Poster, see perform special copy jobs on page 18.  
1
2
3
4
Press Copy Options until Reduce/Enlarge appears.  
Press Enter to select the option.  
Press  
to choose a Reduce/Enlarge option.  
If you are using the Custom option, press Enter, then press  
or  
to  
select a percentage. Press Enter when the desired percentage is  
displayed.  
5
Press Start Copy, Black or Start Copy, Color.  
make copies  
lighter or darker  
Use Lighter/Darker to adjust the lightness and darkness of the copies you  
make.  
1
Press Copy Options until Lighter/Darker appears, and then press  
Enter.  
The range of Lighter/Darker values appears as a circle on a scale on  
the front-panel display.  
2
Press  
to lighten the copy or  
to darken it.  
use the copy features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
16  
       
hp psc 2100 series  
The circle moves to the left or right, depending on the button you  
press.  
3
Press Start Copy, Black or Start Copy, Color.  
enhance text  
sharpness and  
photo colors  
Use Text enhancements to sharpen edges of black text. Use Photo for  
photographs or pictures to enhance light colors that may otherwise appear  
white. Use Mixed when your original has both text and graphics.  
Text enhancement is the default option. You can turn off Text enhancement  
by selecting Photo or None if the following occur:  
Stray dots of color surround some text on your copies.  
Large, black typefaces look splotchy (not smooth).  
Thin, colored objects or lines contain black sections.  
Horizontal grainy or white bands appear in light- to medium-gray  
areas.  
1
2
Press Copy Options until Enhancement appears, and then press Enter.  
Press  
until the desired enhancement (Text, Photo, Mixed, or None)  
appears.  
3
Press Start Copy, Black or Start Copy, Color.  
change color  
intensity  
You can adjust color intensity to make colors on your copy more vivid or  
more subtle.  
1
Press Copy Options until Color Intensity appears, and then press Enter.  
The range of color intensity values appears as a circle on a scale on  
the front-panel display.  
2
Press  
vivid.  
to make the image more pale or  
to make the image more  
The circle moves to the left or right, depending on the button you  
press.  
3
Press Start Copy, Black or Start Copy, Color.  
change settings  
for all copy tasks  
Save the copy settings you use most often by setting them as the default. This  
includes changes to Copy Options, such as Paper Type and Paper Size, as  
well as other Copy settings on the front panel, such as Copies (1-99), and  
Quality.  
1
2
3
4
5
Make any desired changes to the Copy Options.  
Press Copy Options until Set New Defaults appears.  
Press Enter.  
Press  
until Yes appears.  
Press Enter to set the option as a default.  
Your settings are saved.  
make copies  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
perform special copy jobs  
In addition to supporting standard copying, your HP PSC can also do the  
following:  
copy a photo  
fit a copy to the page  
print several copies on one page  
make a poster  
prepare a color t-shirt transfer  
copy a photo  
When copying a photo, you should select options for the correct paper type  
and photo enhancement. You may also want to use the photo print cartridge  
for superior print quality.  
1
2
3
4
Load the photo on the glass.  
If you are using photo paper, load it in the paper tray.  
Press Copy Options until Paper Type appears, then press Enter.  
Press  
until the desired photo paper option appears, then press  
Enter to select it.  
5
6
7
Press  
Press  
until Enhancements appears, then press Enter to select it.  
until Photo appears, then press Enter to select it.  
Press Start Copy, Black or Start Copy, Color.  
Tip! To enlarge a photo automatically to a full page, use the  
Fit to Page feature.  
fit a copy to the  
page  
Use Fit to Page when you want to automatically enlarge or reduce your  
original to fit the paper size you have loaded. You can enlarge a small  
photo to fit a full-size page, as shown below, or you can use this feature to  
easily copy a Legal original to Letter paper or vice versa. Using Fit to Page  
may prevent unwanted cropping of text or images around the margins.  
Tip! Make sure that the glass is clean and the original has  
been placed in the front-right corner of the glass.  
Fit to Page  
Original  
use the copy features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
18  
           
hp psc 2100 series  
1
2
3
4
Load the original on the glass.  
Press Copy Options until Reduce/Enlarge appears, then press Enter.  
Press until Fit to Page appears, then press Enter.  
Press Start Copy, Black or Start Copy, Color.  
print several  
copies on one  
page  
You can place multiple copies of an original on one page by selecting a  
photo size and then selecting the number of copies you want.  
There are several common photo sizes available from the Reduce/Enlarge  
option, which you access from the Copy Options button. After you select one  
of the available sizes by pressing Enter, you may be prompted to select the  
number of copies that can be placed on the page if there is room for more  
than one.  
Original  
Copy  
1
2
3
4
Load the original on the glass.  
Press Copy Options until Reduce/Enlarge appears, then press Enter.  
Press  
until the desired photo size appears, then press Enter.  
Press  
to select the maximum number of images that will fit on the  
page or one image per page.  
Some larger sizes do not prompt you for a number of images. If this is  
so, only one image is copied to the page.  
5
6
Press Enter to select the number of photos you want to copy to a page.  
Press Start Copy, Black or Start Copy, Color.  
Tip! If the number of copies of the photo on a single page  
does not come out as expected, try turning the original on the  
glass 90 degrees and start the copy again.  
make a poster  
When you use the Poster feature you divide your original into sections, then  
enlarge the sections so you can assemble them into a poster.  
perform special copy jobs  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
Original  
Poster  
1
2
3
Load the original on the glass.  
Press Copy Options until Reduce/Enlarge appears, then press Enter.  
Press until Poster appears, then press Enter.  
The default poster size is 2-pages wide.  
Do one of the following:  
4
Press Enter to select the default poster size.  
Press to select other poster size options, then press Enter to  
confirm your selection.  
5
Press Start Copy, Black or Start Copy, Color.  
Tip! After you select the poster width, the HP PSC adjusts the  
length automatically to maintain the proportions of the  
original. If the original cannot be enlarged to the selected  
poster size, an error message appears that tells you the  
number of pages wide that are possible. Select a smaller  
poster size and make the copy again.  
prepare a color  
t-shirt transfer  
Use the Iron-On feature to reverse text and images so that they appear  
backwards. After you iron a transfer onto a T-shirt, the picture appears  
properly on the shirt.  
Original  
Iron-On  
Tip! We recommend that you practice applying a T-shirt  
transfer on an old garment first.  
use the copy features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
20  
   
hp psc 2100 series  
1
2
3
4
Load the original on the glass.  
Load the T-shirt transfer paper in the paper tray.  
Press Copy Options until Paper Type appears, then press Enter.  
Press until Iron-On appears and then press Enter to select it.  
Selecting this option automatically copies a mirror-image of your  
original.  
5
Press Start Copy, Black or Start Copy, Color.  
stop copying  
copy options  
!
To stop copying, press Cancel on the front panel.  
The following diagram shows the options that are available from the Copy  
Options button.  
Reduce/  
Enlarge  
Paper Type  
Lighter/  
Darker  
Enhancements  
< ooooGoooo >  
< ooooOGooo >  
< ooooOoGoo >  
< ooooOooGo >  
< ooooOoooG >  
< GoooOoooo >  
< oGooOoooo >  
< ooGoOoooo >  
< oooGOoooo >  
Text  
Plain Paper  
Actual Size  
Fit to Page  
Custom 100%  
4 x 6 inch*  
5 x 7 inch  
8 x 10 inch  
2 ½ x 3 ¼  
3 x 4 inches  
3 ½ x 5 inch  
Poster  
Photo  
Mixed  
None  
Premium Inkjet  
Premium Photo  
Photo Paper  
PhotQual Inkjet  
Everyday Photo  
Transparency  
Iron-On  
Brochure Glossy  
Brochure Matte  
Paper Size  
Color Intensity  
Set New  
Defaults  
Letter  
A4  
< oooGooo >  
< oooOGoo >  
< oooOoGo >  
< oooOooG >  
< GooOooo >  
< oGoOooo >  
< ooGOooo >  
No  
Yes  
Press Copy Options to display the copy options.  
Press and to move to the setting you want.  
Press Enter to select the displayed setting.  
*The sizes vary by country/region.  
stop copying  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
use the copy features  
Download from Www.Somanuals.com. All Manuals Search And Download.  
22  
use the scan features  
Scanning is the process of converting text and pictures into an electronic  
format for your computer. You can scan just about anything:  
Photos  
Magazine articles  
Text documents  
3D objects (be careful not to scratch the glass) to put into catalogs and  
flyers  
Because the scanned image or text is in an electronic format, you can bring  
it into your word processor or graphics program and modify it to suit your  
needs. You can do the following:  
Scan text from an article into your word processor and quote it in a  
report, saving you a lot of retyping.  
Scan in a logo and use it in your publishing software, allowing you to  
print business cards and brochures for yourself.  
Scan in photos of your kids and e-mail them to relatives, create a  
photographic inventory of your house or office, or create an electronic  
scrapbook.  
To use the scan features, your HP PSC and computer must be connected and  
turned on. The HP PSC software should also be installed and running on  
your computer prior to scanning. To verify that the HP PSC software is  
running, look for a status icon in the system tray.  
For more information about scanning your documents, pictures, or negatives  
from the HP PSC software, see scan pictures and documents in the HP Photo  
& Imaging Help for more information.  
scan an original  
You can start a scan from your computer or from your HP PSC.  
scan an original  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
hp psc 2100 series  
to scan an original to your Windows computer  
1
2
Load your original on the glass.  
Press Start Scan.  
A scan of the original appears in the HP Image Viewer.  
3
In the HP Image Viewer window, you can edit the scanned image.  
When you have finished, click Accept.  
For more information about making changes to an image during the  
preview, see adjust an image during the preview in scan pictures and  
documents in the HP Photo & Imaging Help for more information.  
The HP PSC does a final scan of the original and sends the image to  
the HP Photo & Imaging Gallery.  
See manage images in how to use the software for more information  
about using the HP Photo & Imaging Gallery.  
to scan an original from your Macintosh computer  
1
Load your original on the glass.  
For more information, see load originals on page 7.  
2
Press Start Scan.  
The HP PSC scans the original and sends the image to the HP Photo &  
Imaging Gallery.  
See the HP Photo & Imaging Gallery online help for more information.  
scan to a  
different  
software  
program  
If you prefer to scan your document to a software program other than the  
HP Photo & Imaging Gallery or HP Imaging Center, you can choose a  
different program from the Scan To list that appears in the front-panel  
display. The HP PSC scans the document, launches the selected software  
program, and displays the scanned image in that program.  
1
Load your original.  
For more information, see load originals on page 7.  
2
3
Press Setup until Scan Setup appears.  
Press  
to scroll through the Scan To list until the desired scan-to  
software program appears.  
4
Press Start Scan to begin the scan.  
The HP PSC scans your original and displays it in the selected  
software program.  
stop scanning  
You can stop a scan by pressing the Cancel button located on the front  
panel.  
use the scan features  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
maintain your hp psc  
This section provides instructions for keeping your HP PSC in top working  
condition. Perform these maintenance procedures as necessary.  
clean the glass  
Dirty glass, from fingerprints, smudges, hair, and so on, slows down  
performance and affects the accuracy of features such as Fit to Page and  
Copy.  
1
2
Turn off the unit, unplug the power cord, and raise the lid.  
Clean the glass with a soft cloth or sponge slightly moistened with a  
nonabrasive glass cleaner.  
Caution! Do not use abrasives, acetone, benzene, or carbon  
tetrachloride on the glass; these can damage it. Do not place  
liquids directly on the glass. They may seep under it and  
damage the unit.  
3
Dry the glass with a chamois or cellulose sponge to prevent spotting.  
clean the lid backing  
Minor debris can accumulate on the white document-backing located  
underneath the unit’s lid.  
1
2
Turn off the unit, unplug the power cord, and raise the lid.  
Clean the white document-backing with a soft cloth or sponge slightly  
moistened with a mild soap and warm water.  
3
4
Wash the backing gently to loosen debris; do not scrub the backing.  
Dry the backing with a chamois or soft cloth.  
Caution! Do not use paper-based wipes as these may scratch  
the backing.  
5
If this does not clean the backing well enough, repeat the previous  
steps using isopropyl (rubbing) alcohol, and wipe the backing  
thoroughly with a damp cloth to remove any residual alcohol.  
clean the glass  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
hp psc 2100 series  
clean the exterior  
Use a soft, damp, lint-free cloth to wipe dust, smudges, and stains off the  
case. The interior of the unit does not require cleaning. Keep fluids away  
from the interior of the unit as well as the front panel.  
work with print cartridges  
To ensure the best print quality from your HP PSC, you will need to perform  
some simple maintenance procedures, and when prompted by a front-panel  
message, replace the print cartridges.  
print a self-test  
report  
If you are experiencing problems with printing, before cleaning or replacing  
the print cartridges, you should print a self-test report. This report provides  
useful information about your print cartridges, including status information  
and ink levels.  
1
2
Press Setup until Print Report appears, and then press Enter.  
Press until Self-Test appears, and then press Enter.  
A self-test report is printed for your HP PSC, which may indicate the  
source of any problems you may be having.  
handle print  
cartridges  
Before you replace or clean a print cartridge, you should know the part  
names and how to handle the print cartridge.  
Copper contacts  
Ink nozzles  
Plastic tape  
under tape  
(must be removed)  
Do not touch the copper contacts or the ink nozzles  
maintain your hp psc  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
         
hp psc 2100 series  
use the print  
cartridge  
protector  
The print cartridge protector is designed to keep your print cartridge secure  
when it is not being used. Whenever you remove a print cartridge from the  
printer, store it in the print cartridge protector that came with your printer.  
To insert a print cartridge into the print cartridge protector, slide the  
print cartridge into the print cartridge protector at a slight angle and  
snap it securely into place.  
To remove the print cartridge from the print cartridge protector, press  
down and back on the top of the print cartridge protector to release  
the print cartridge, then slide the print cartridge out of the print  
cartridge protector.  
replace the print  
cartridges  
Front-panel display messages appear to let you know that you should  
replace your print cartridges.  
You may also need to replace a print cartridge when you want to use the  
photo print cartridge for printing high-quality photos.  
See order print cartridges on page 61 for information on ordering  
replacement print cartridges.  
1
Turn on the unit, then open the print-carriage access door by lifting the  
handle until the door locks into place.  
The print carriage moves to the center of the unit.  
latches  
work with print cartridges  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
hp psc 2100 series  
2
After the carriage stops moving, lift the latch to release the print  
cartridge, then pull it toward you out of its slot.  
3
4
If you are removing the black print cartridge in order to install the  
photo print cartridge, store it in the print cartridge protector.  
Remove the new print cartridge from its packaging and, being careful  
to touch only the black plastic, gently remove the plastic tape.  
Caution! Do not touch the copper contacts or ink nozzles.  
5
Push the new print cartridge into the appropriate slot until it clicks into  
place.  
The tri-color print cartridge goes on the left and the black or photo  
print cartridge goes on the right.  
maintain your hp psc  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp psc 2100 series  
6
7
Pull the end of the latch toward you, press down until it stops, and then  
release. Make sure the latch catches below the bottom tabs.  
Close the print-carriage access door.  
align cartridges  
The HP PSC prompts you to align cartridges every time you install or replace  
a print cartridge. Aligning the cartridges ensures high-quality output.  
To align the print cartridges when prompted:  
1
Press Enter on the front panel.  
Two pages are printed, one with instructions and one with patterns.  
2
Follow the instructions on the instruction page, then place the page  
with patterns on the glass and press Start Scan.  
The cartrdges are aligned correctly.  
To align the cartridges at any other time:  
1
2
Press Setup until Maintenance appears, and then press Enter.  
Press until Align Cartridge appears, and then press Enter.  
Two pages are printed, one with instructions and one with patterns.  
3
Follow the instructions on the instruction page, then place the page  
with patterns on the glass and press Start Scan.  
The cartrdges are aligned correctly.  
clean the print  
cartridges  
Use this feature when the Self-Test Report shows streaking or white lines  
through any of the colored bars. Do not clean print cartridges unnecessarily.  
This wastes ink and shortens the life of the ink nozzles.  
1
2
Press Setup until Maintenance appears, and then press Enter.  
Press until Clean Cartridge appears, and then press Enter.  
If copy or print quality still seem poor after you clean the print  
cartridges, replace the print cartridge that is affected.  
restore factory defaults  
You can restore the original factory settings to what they were when you  
purchased your HP PSC. You can perform this process from the front panel  
only.  
1
2
Press Setup until Maintenance appears, and then press Enter.  
Press until Restore Defaults appears, and then press Enter.  
The factory default settings are restored.  
restore factory defaults  
Download from Www.Somanuals.com. All Manuals Search And Download.  
29  
       
hp psc 2100 series  
set the power save time  
The bulb in your HP PSC remains on for a specified period so that the unit  
is immediately ready to respond to your request. When the HP PSC has not  
been used within that specified period, it turns the bulb off to preserve power  
and displays Power Save On in the front-panel display. (You can exit this  
mode by pressing any button on the front panel.)  
Your unit is automatically set to enter power-save mode after 12 hours.  
Follow these steps if you want the HP PSC to enter this mode earlier.  
1
2
3
Press Setup until Maintenance appears, and then press Enter.  
Press  
Press  
until Power Save Time appears, and then press Enter.  
until the desired time appears, then press Enter.  
set scroll speed  
The Scroll Speed option lets you control the rate that text messages appear  
in the front-panel display. You can choose Normal, Fast, or Slow.  
1
2
3
Press Setup until Maintenance appears, and then press Enter.  
Press  
Press  
until Scroll Speed appears, and then press Enter.  
until the desired speed appears, then press Enter.  
set the prompt delay time  
The Prompt Delay option lets you control the amount of time before a  
message is displayed in the front-panel display. You can choose Normal,  
Fast, or Slow.  
1
2
3
Press Setup until Maintenance appears, and then press Enter.  
Press  
Press  
until Prompt Delay appears, and then press Enter.  
until the delay time appears, then press Enter.  
maintain your hp psc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
30  
           
hp psc 2100 series  
setup menu options  
The following options are available from the Setup button.  
Maintenance  
Scan Setup  
Print Report  
Clean Cartridge  
Align Cartridge  
Restore Defaults  
Lang/Country  
Power Save Time  
Scroll Speed  
Menu Settings  
Self-Test  
Use Setup to display the Scan Setup,  
Maintenance or Print Report options.  
View Angle  
Press  
and  
to move to the setting you want.  
Prompt Delay  
Press Enter to select the displayed setting.  
setup menu options  
Download from Www.Somanuals.com. All Manuals Search And Download.  
31  
   
hp psc 2100 series  
maintain your hp psc  
Download from Www.Somanuals.com. All Manuals Search And Download.  
32  
additional setup  
information  
This section covers how to handle messages that may or may not appear  
during installation, how to set up the connection between your computer  
and your HP PSC, and how to add and remove the HP PSC software. The  
standard installation instructions are provided in your Setup Poster, which  
you should keep for later use.  
possible installation problems  
If you follow the instructions in the Setup Poster correctly, you should not have  
any problems with the installation of your HP PSC. If you do not follow the  
instructions, you may see any of the following problems:  
If Microsoft’s New Hardware Found message does not appear  
If you installed the HP PSC software first as requested on the Setup Poster,  
and you are a Windows 98/2000/ME/XP user, a series of Microsoft New  
Hardware Found messages should have appeared on your screen after  
software installation and after the HP PSC was connected to your computer.  
If the Microsoft messages did not appear, try the following:  
Verify that you are using a full-speed (12 Mbps) USB cable and that it  
does not exceed three meters in length (9.8 feet).  
Verify that the computer is USB-ready. For more information about  
determining whether your computer is USB-ready, see your computer’s  
documentation or check with the computer’s manufacturer.  
Verify that the cable is plugged fully into your HP PSC and directly  
connected to the USB port on your computer. After the cable is  
connected properly, turn your HP PSC off and then on again.  
Turn your HP PSC off and then on again, then restart your computer.  
If the previous steps do not solve the problem, remove and reinstall the  
software. For more information, see remove and reinstall your hp psc  
software on page 37.  
possible installation problems  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
If the New Hardware Message appears (Windows 98, 2000, ME, or XP)  
If you set up your HP PSC and connect it directly to your computer before  
you install the software, you may encounter one of the following messages:  
To avoid errors, install the HP PSC software before you connect the HP PSC  
to your computer. If one of the above messages appeared and you clicked  
Next or OK, do the following:  
1
2
3
4
Press Esc on your keyboard to exit.  
Turn off your HP PSC.  
Disconnect the HP PSC from your computer (detach the USB cable).  
Follow the software installation steps outlined in the Setup Poster that  
came with your HP PSC.  
If the previous version installed message appears  
If you receive a message that you have a previously installed version, you  
will not be able to finish installing the HP PSC software.  
the HP PSC software.  
If your computer is unable to communicate with your HP PSC  
If communication cannot be established between your computer and  
HP PSC (for example, the HP PSC status icon has the yellow error triangle),  
try the same tasks outlined under If Microsoft’s New Hardware Found  
message does not appear on page 33.  
additional setup information  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp psc 2100 series  
You may also want to refer to the readme file for more  
information on possible installation problems. On  
Windows, you can access the readme file from the Start  
button on the taskbar; select Programs, Hewlett-Packard,  
hp psc 2000 series, View the Readme File. On  
Macintosh, you can access the readme file by double-  
clicking on the icon located in the top-level folder of the  
HP PSC software CD-ROM.  
set the language and region  
Usually, the language and region are set when you install the HP PSC. If you  
set the region or language incorrectly during installation, use the following  
procedure.  
1
If you are unable to read the front-panel display language, but need to  
access the maintenance function to reset it, press and hold Enter and  
then press  
.
2
3
4
5
6
Press Setup until Maintenance appears, and then press Enter.  
Press  
Press  
until Lang/Region appears, and then press Enter.  
until the desired language appears.  
Press Enter when the desired language appears.  
After the language is selected, you are prompted with all the regions  
for that selected language.  
7
8
Press  
until the desired region appears.  
Press Enter to select the desired region.  
You can confirm the region and language by printing a Self-Test  
Report.  
9
Press Setup until Print Report appears, then press Enter.  
10 Press  
until Self-Test appears, then press Enter.  
set the front-panel view angle  
If you have difficulty seeing the text in the front-panel display, you may need  
to change the view angle. The View Angle option lets you control the  
viewing angle of the text in the front-panel display. You can change the  
angle so that it displays text best when you view it from a standing position  
or from a seated position.  
1
2
3
Press Setup until Maintenance appears, and then press Enter.  
Press  
Press  
until View Angle appears, and then press Enter.  
until the desired angle appears, then press Enter.  
set the language and region  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
connect your hp psc to your computer  
Your HP PSC supports HOT Swapping, meaning you can connect to the  
HP PSC while the power is on at your computer and on the HP PSC.  
connectyourusb  
port  
Connecting to your HP PSC with USB is straightforward. Simply plug one  
end of the USB cable into the back of your computer and the other in the  
back of the HP PSC.  
what works  
what does not work  
Plugging into the USB port on your Plugging into the USB port located  
computer on the keyboard  
Plugging into a powered hub that is Plugging into a non-powered USB  
connected to the USB port on your hub  
computer  
AppleTalk is not supported.  
connecting to the USB port on your computer  
connect your  
hp psc to more  
than one  
You can connect more than one computer to your HP PSC by using a  
powered hub. Both computers must have the HP PSC software installed.  
Connect each computer to the hub, then connect the hub to the HP PSC.  
computer  
If you want to connect more than one computer to your HP PSC in a  
networked environment, you can do so using an HP JetDirect 175x and USB  
(Windows and Macintosh), but only print functionality will be available for  
the HP PSC.  
additional setup information  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
hp psc 2100 series  
To use your HP PSC in a networked environment, you must install the  
software that comes with the HP JetDirect 175x, which disables all HP PSC  
functionality except printing.  
If you have already installed the HP PSC software,  
uninstall that software, then install the HP JetDirect 175x  
software.  
If you have Internet access, you can get more information on using an HP  
JetDirect 175x from the HP website at:  
You can have up to 10 client computers on the network  
portion of the 175x and USB combination.  
remove and reinstall your hp psc software  
Do not simply delete the HP PSC program files from your hard drive. Be sure  
to remove them properly using the uninstall utility provided in the HP PSC  
program group.  
to uninstall from a Windows computer  
1
On the Windows taskbar, click Start, choose Programs or All  
Programs (XP), choose Hewlett-Packard, choose hp psc 2000 series,  
then choose uninstall software.  
2
3
Follow the directions on the screen.  
If you are asked whether you would like to remove shared files, click  
No.  
Other programs that use these files may not work properly if the files  
are deleted.  
4
5
After the program finishes removing the software, disconnect your  
HP PSC, and restart your computer.  
To reinstall the software, insert the HP PSC 2100 Series CD-ROM into  
your computer’s CD-ROM drive, and follow the instructions that  
appear.  
6
After the software is installed, connect and turn on your HP PSC.  
to uninstall from a Macintosh computer  
1
2
3
Double-click on Applications:HP All-in-One Software folder.  
Double-click on Uninstaller.  
Follow the directions that appear on the screen.  
remove and reinstall your hp psc software  
Download from Www.Somanuals.com. All Manuals Search And Download.  
37  
   
hp psc 2100 series  
4
5
After the program finishes removing the software, disconnect your  
HP PSC, and restart your computer.  
To reinstall the software, insert the HP PSC 2100 Series CD-ROM into  
your computer’s CD-ROM drive, and follow the instructions that  
appear.  
When re-installing the software, follow the instructions on  
the Setup Poster. Do not connect the HP PSC to your  
computer until after you have completed the software  
installation.  
additional setup information  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
technical information  
system requirements  
The following specifications are subject to change without notice.  
PC Requirements  
Item  
Minimum  
Recommended  
Processor  
Windows 98  
Any Intel Pentium II, Celeron, or  
compatible processor  
Intel Pentium III or higher  
Windows 98SE  
Windows 2000  
Windows Millennium Edition  
Windows XP  
RAM  
Windows 98  
64 MB  
128 MB or more  
Windows 98SE  
Windows 2000  
Windows Millennium Edition  
Windows XP  
Disk space needed for installation  
Additional disk space needed for scanned images  
Monitor  
300 MB  
50 MB  
SVGA 800 x 600 with 16-bit  
color  
Media  
CD-ROM drive  
I/O  
Available USB port  
Internet access  
Sound card  
Other  
Recommended  
Recommended  
I.E. 5.0 or higher  
Adobe Acrobat 4 or higher  
Macintosh Requirements  
Item  
Minimum  
Recommended  
Processor  
G3 Processor  
G4 Processor or higher  
system requirements  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
hp psc 2100 series  
Macintosh Requirements  
Item  
Minimum  
Recommended  
RAM  
Macintosh OS 9  
Macintosh OS X  
64 MB  
128 MB  
128 MB  
256 MB  
Disk space needed for installation  
200 MB  
Additional disk space needed for scanned images  
50 MB  
Monitor  
SVGA 800 x 600  
CD-ROM drive  
Available USB port  
Media  
I/O  
Internet access  
Sound card  
Recommended  
Recommended  
paper specifications  
paper-tray  
capacities  
type  
a
b
paper weight  
input tray  
output tray  
Plain paper  
16 to 24 lb.  
100  
100  
40  
50 black, 20 color  
(60 to 90 gsm)  
Legal paper  
Cards  
20 to 24 lb.  
50 black, 20 color  
40  
(75 to 90 gsm)  
110 lb. index max  
(200 gsm)  
Envelopes  
Banners  
20 to 24 lb. (75 to 90 gsm)  
16-24 lb. (60-90 gsm)  
N/A  
15  
20  
25  
20  
30  
10  
20 or less  
25 or less  
20  
Transparency film  
Labels  
N/A  
4x6 Photo  
145 lb. (236 gsm)  
30  
a Maximum capacity  
b Output tray capacity is affected by the type of paper and the amount of ink you are using. HP recommends  
emptying the tray frequently.  
paper sizes  
Type  
Size  
Paper  
Letter: 8.5 x 11 in. (215.9 x 279.4 mm)  
Legal: 8.5 x 14 in. (215.9 x 355.6 mm)  
Executive: 7.25 x 10.5 in. (184.2 x 266.7 mm)  
A4: 210 x 297 mm  
A5: 148 x 210 mm  
B5: 182 x 257 mm  
Banner  
Letter: 8.5 x 11 in. (216 x 279 mm)  
A4: 8.27 x 11.69 in. (210 x 297 mm)  
technical information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
40  
 
hp psc 2100 series  
Type  
Size  
Envelopes  
U.S. #10: 4.12 x 9.5 in. (104.8 x 241.3 mm)  
A2: 4.37 x 5.75 in. (111 x 146 mm)  
DL: 4.33 x 8.66 in. (110 x 220 mm)  
C6: 4.49 x 6.38 in. (114 x 162 mm)  
Transparency films  
Cards  
Letter: 8.5 x 11 in. (216 x 279 mm)  
A4: 210 x 297 mm  
3 x 5 in. (76.2 x 127 mm)  
4 x 6 in. (101.6 x 152 mm)  
5 x 8 in. (127 x 203.2 mm)  
A6: 105 x 148.5 mm  
hagaki card: 100 x 148 mm  
Labels  
Letter: 8.5 x 11 in. (216 x 279 mm)  
A4: 210 x 297 mm  
Custom  
3 x 5 in. up to 8.5 x 14 in. (76.2 x 127 mm up to 216 x 356 mm)  
print specifications  
1200 x 1200 dpi black with resolution enhancement technology (REt)  
1200 x 1200 dpi color with HP PhotoREt III  
Method: Drop-on-demand thermal inkjet  
Language: HP PCL Level 3, PCL3 GUI or PCL 10  
Print speeds vary according to the complexity of the document.  
Duty cycle: 500 printed pages per month (average)  
Duty cycle: 3000 printed pages per month (maximum)  
mode  
resolution (dpi)  
speed (ppm)  
psc 2100 series psc 2200 series  
Best/inkjet/1200 Black  
Color  
1200 x 1200  
2
2
1200 x 1200  
.5  
.5  
(up to 4800 dpi optimizeda  
)
Normal  
Everyday  
Fast  
Black  
Color  
Black  
Color  
Black  
Color  
600 x 600  
600 x 600  
600 x 600  
600 x 600  
300 x 300  
300 x 300  
6
7
3.5  
4
7
8
5
6
up to 14.0  
up to 10.0  
up to 17.0  
up to 12.0  
a Up to 4800 x 1200 optimized dpi color printing onpremium photo papers, 1200 x 1200 input dpi.  
print margin specifications  
Top  
Bottom  
(trailing edge)  
Left  
Right  
a
(leading edge)  
Sheet Paper  
print specifications  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
       
hp psc 2100 series  
Top  
Bottom  
(trailing edge)  
Left  
Right  
a
(leading edge)  
U.S. letter  
U.S. legal  
U.S. executive  
ISO A4  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.25 in. (6.4 mm)  
.25 in. (6.4 mm)  
.25 in. (6.4 mm)  
.13 in. (3.4 mm)  
.13 in. (3.4 mm)  
.13 in. (3.4 mm)  
.25 in. (6.4 mm)  
.25 in. (6.4 mm)  
.25 in. (6.4 mm)  
.13 in. (3.4 mm)  
.13 in. (3.4 mm)  
.13 in. (3.4 mm)  
ISO A5  
JIS B5  
Envelopes  
U.S. No. 10  
A2 (5.5 baronial)  
Intnl. DL  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
Intnl. C6  
Cards  
U.S. 3 x 5 in.  
U.S. 4 x 6 in.  
U.S. 5 x 8 in.  
ISO and JIS A6  
Hagaki  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.07 in. (1.8 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.46 in. (11.7 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
.13 in. (3.2 mm)  
a This margin is not LaserJet-compatible, however, the total writing area is compatible. The writing area is offset  
from center by .21 inches (5.4 mm), which causes asymmetric top and bottom margins.  
copy specifications  
Digital image processing  
Up to 99 copies from original (varies by model)  
Digital zoom from 25 to 400% (varies by model)  
Fit to page, Poster, Many on page  
Up to 17 cpm black, 12 cpm color (varies by model)  
Copy speeds vary according to the complexity of the document  
a
mode  
speed (ppm)  
print resolution (dpi)  
scan resolution (dpi)  
psc 2100  
psc 2200  
up to 0.8  
up to 0.8  
up to 7  
Best  
Black  
Color  
Black  
Color  
Black  
Color  
up to 0.8  
up to 0.8  
up to 6  
1200 x 1200b  
1200 x 1200b  
600 x 1200  
600 x 600  
1200 x 2400  
1200 x 2400  
600 x 1200  
600 x 1200  
600 x 1200  
600 x 1200  
Normal  
Fast  
up to 2  
up to 4  
up to 14  
up to 10  
up to 17  
up to 12  
300 x 1200  
600 x 300  
technical information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
42  
 
hp psc 2100 series  
a Maximum at 400% scaling  
b On photo paper or premium inkjet paper  
scan specifications  
Create photo projects  
Imaegdeitnocrlu ded  
OCR software automatically converts to editable text  
Scan speeds vary according to the complexity of the document  
Item  
Description  
psc 2100 series  
psc 2200 series  
Resolution  
Color  
600 x 1200 dpi optical, up to 9600 dpi  
enhanced  
1200 x 2400 dpi optical, up to 9600 dpi  
enhanced  
48-bit color  
8-bit grayscale (256 levels of gray)  
48-bit color  
8-bit grayscale (256 levels of gray)  
Interface  
TWAIN-compliant  
US Letter, A4  
TWAIN-compliant  
US Letter, A4  
Scanning Area  
physical specifications  
Height: 8.7 in. (22 cm)  
Width: 18.2 in. (46.3 cm)  
Depth: 14.6 in. (37 cm)  
Weight: 17.25 lb. (7.82 kg)  
power specifications  
Power consumption: 75W maximum  
Source (Input) Voltage: 100 to 240 VAC, grounded  
Input Frequency: 50 to 60 Hz  
Current: 1.0 A maximum  
environmental specifications  
Recommended Operating Temperature Range: 15º to 32º C (59º to 90º F)  
Allowable Operating Temperature Range: 5º to 40º C (41º to 104º F)  
Humidity: 15% to 85% RH non-condensing  
Non-operating (Storage) Temperature Range: -40º to 60º C (-40º to 140º F)  
additional specifications  
Memory: 8.0-MB ROM, 8.0-MB RAM (psc 2100 series)  
Memory: 8.0-MB ROM, 16.0-MB RAM (psc 2200 series)  
If you have Internet access, you can get acoustic information from the HP website at:  
scan specifications  
Download from Www.Somanuals.com. All Manuals Search And Download.  
43  
           
hp psc 2100 series  
environmental product stewardship program  
protecting the  
environment  
Hewlett-Packard is committed to providing quality products in an environmentaly  
sound manner. This product has been designed with several attributes to minimize  
impacts on our environment.  
For more information, visit HP’s Commitment to the Environment website at:  
ozone production  
paper use  
This product generates no appreciable ozone gas (O3).  
This product is suited for the use of recycled paper according to DIN 19309.  
plastics  
Plastic parts over 25 grams are marked according to international standards that  
enhance the ability to identify plastics for recycling purposes at the end of the  
product’s life.  
recycling program  
HP offers an increasing number of product return and recycling programs in many  
countries, as well as partnering with some of the largest electronic recycling centers  
throughout the world. HP also conserves resources by refurbishing and reselling some  
of its most popular products.  
energy  
consumption  
Energy usage drops significantly while in Power Save mode, which saves natural  
resources, and saves money without affecting the high performance of this product.  
This product qualifies for ENERGY STAR®, which is a voluntary program established  
to encourage the development of energy-efficient office products.  
ENERGY STAR is a U.S. registered service mark of the U.S. EPA. As an ENERGY STAR  
partner, HP has determined that this product meets ENERGY STAR guidelines for  
energy efficiency.  
For more information on ENERGY STAR guidelines, visit the following web site:  
material safety  
data sheets  
Material safety data sheets (MSDS) can be obtained from the HP web site at:  
If you are in the United States or Canada and do not have access to the Internet, call  
the U.S. HP FIRST fax-on-demand service at (800) 231-9300. Use Index number 7 for  
a listing of the material safety data sheets.  
International customers without Internet access should call (404) 329-2009 for further  
information.  
regulatory notices  
The following sections are statements from various regulatory agencies.  
FCC statement  
The United States Federal Communications Commission (in 47 CFR 15.105) has  
specified that the following notice be brought to the attention of users of this product.  
technical information  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
     
hp psc 2100 series  
Declaration of Conformity: This equipment has been tested and found to comply with  
the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. Operation  
is subject to the following two conditions: (1) this device may not cause harmful  
interference, and (2) this device must accept any interference received, including  
interference that may cause undesired operation. Class B limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses, and can radiate radio frequency energy,  
and, if not installed and used in accordance with the instructions, may cause harmful  
interference to radio communications. However, there is not guarantee that  
interference will not occur in a particular installation. If this equipment does cause  
harmful interference to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
Reorient the receiving antenna.  
Increase the separation between the equipment and the receiver.  
Connect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Product Regulations Manager, Hewlett-Packard Company, San Diego, (858) 655-  
4100.  
The user may find the following booklet prepared by the Federal Communications  
Commission helpful: How to Identify and Resolve Radio-TV Interference Problems. This  
booklet is available from the U.S. Government Printing Office, Washington DC,  
20402. Stock No. 004-000-00345-4.  
Caution! Pursuant to Part 15.21 of the FCC Rules, any changes or  
modifications to this equipment not expressly approved by the  
Hewlett-Packard Company, may cause harmful interference and void  
the FCC authorization to operate this equipment.  
doc statement /  
déclaration de  
conformité  
Le présent appareil numérique n'émet pas de bruit radioélectrique dépassant les  
limites applicables aux appareils numériques de la classe B prescrites dans le  
Règlement sur le brouillage radioélectrique édicté par le ministère des  
Communications du Canada.  
This digital apparatus does not exceed the Class B limits for radio noise emissions  
from digital apparatus set out in the Radio Interference Regulations of the Canadian  
Department of Communications.  
(Canada)  
regulatory notices  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp psc 2100 series  
declaration of conformity  
According to ISO/IEC Guide 22 and EN 45014  
Manufacturer’s Name and Address:  
Hewlett-Packard Company, 16399 West Bernardo Drive, San Diego, CA 92127-1899, USA  
declares that the product  
Product Name:  
hp psc 2100 series (C8644A)  
Model Number(s):  
Product Options:  
psc 2110 (C8648A), psc 2110xi (C8649A), psc 2110v (C8650A), psc 2105 (C8647A)  
All  
conforms to the following Product Specifications:  
Safety:  
EN60950:1992 +A1, A2, A3, A4 & A11  
IEC60950:1991 +A1, A2, A3 & A4  
UL1950/CSA 22.2 No. 950, 3rd Edn: 1995  
NOM-019-SCFI-1993  
IEC 60825-1:1993 +A1/EN 60825-1:1994 +A11 Class 1 (Laser/LED)  
CISPR22:1993 +A1 & A2 / EN55022:1994, +A1 & A2 -Class B  
CISPR24:1997/EN55024:1998  
EMC:  
IEC 61000-3-2:1995 / EN61000-3-2:1995  
IEC 61000-3-3:1994 / EN61000-3-3:1995  
AS/NZS 3548: 1992  
CNS13438  
FCC Part 15-Class B / ICES-003, Issue 2 / VCCI-2  
GB 9254-1998  
Supplementary Information  
The Product herewith complies with the requirements of the Low Voltage Directive 73/23/EEC, and the EMC Directive 89/  
336/EEC carries the CE marking accordingly.  
European Contact for regulatory topics only: Your local Hewlett-Packard Sales and Service Office or  
Hewlett-Packard GmbH.  
Department HQ-TRE, Herrenberger Strasse 130, D-71034 Böblingen, Germany (FAX + 49-7031-14-3143)  
technical information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
46  
   
get hp psc 2100  
support  
This section explains the service information provided by Hewlett-Packard.  
If you are unable to find the answer you need in the printed or onscreen  
documentation supplied with your product, you can contact one of the HP support  
services listed in the following pages.  
get support and other information from the internet  
If you have Internet access, you can get more information from the HP website at:  
The website offers technical support, drivers, supplies, and ordering information.  
hp customer support  
Software programs from other companies may be included with your HP PSC. If you  
experience problems with any of those programs, you will receive the best technical  
assistance by calling the experts at that company.  
If you need to contact HP Customer Support, do the following before you call.  
1
Make sure that:  
a. Your unit is plugged in and turned on.  
b. The specified print cartridges are installed correctly.  
c. The recommended paper is properly loaded in the input tray.  
2
Reset your unit:  
a. Turn off the unit using the On button located on the unit’s front panel.  
b. Unplug the power cord from the back of the unit.  
c. Plug the power cord back into the unit.  
d. Turn on the unit using the On button.  
3
4
For more information, see the HP website at:  
If you are still experiencing problems and need to speak with an HP Customer  
Support Representative:  
Have your serial number and service ID ready. To display your serial  
number, on the front panel, press Enter and Start Copy, Black at the  
same time, until the serial number appears in the front-panel display. To  
get support and other information from the internet  
Download from Www.Somanuals.com. All Manuals Search And Download.  
47  
       
hp psc 2100 series  
display your service ID, on the front panel, press Enter and Start Copy,  
Color at the same time, until SERV ID: and the number appear in the  
front-panel display  
Print a Self-Test Report. See print a self-test report on page 26 for  
information on printing this report.  
Make a color copy.  
Be prepared to describe your problem in detail.  
5
Call HP Customer Support. Be near your unit when you call.  
call in the U.S.  
during warranty  
Call (208) 323-2551 Monday through Friday from 6:00 A.M. to 10:00 P.M.  
Mountain Standard Time (MST) and Saturdays from 9:00 A.M. to 4:00 P.M. MST.  
This service is free during the warranty period; however, your standard long-distance  
phone charges still apply. A fee may apply outside the warranty period.  
prepare your unit for shipment  
If after contacting HP Customer Support or returning to the point of purchase, you  
are requested to send your unit in for service, please follow the power off and rebox  
steps below to avoid further damage to the HP product.  
1
Turn on the unit.  
Disregard steps 1 through 6, if your unit will not turn on and the print carriage  
is in the home position. You will not be able to remove the ink cartridges.  
Proceed to step 7.  
2
3
Open the print-carriage access door.  
Remove the print cartridges from their holders, and lower the latches.  
Caution! Remove both print cartridges and lower both latches.  
Failure to do so may damage your unit.  
See replace the print cartridges on page 27 for information on removing the  
print cartridges.  
4
Place the print cartridges in an airtight bag so they will not dry out, and put  
them aside (do not send them with the unit, unless instructed to by the HP  
customer support call agent).  
5
6
7
Turn off the unit.  
Close the print-carriage access door.  
Remove the front panel cover as follows:  
a. Insert a small screw driver into the top right corner of the front panel  
cover.  
b. Gently pry the corner up and lift the front panel cover from the unit.  
get hp psc 2100 support  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp psc 2100 series  
8
9
Retain the front panel cover. Do not return the front panel cover with the unit.  
If available, pack the unit for shipment using the original packing materials or  
the packaging materials that come with your exchange unit.  
If you do not have the original packaging materials, please us other adequate  
packaging materials. Shipping damage caused by improper packaging and/  
or improper transportation is not covered under the warranty.  
10 Place the return shipping label on the outside of the box.  
11 Include the following items in the box:  
A brief description of symptoms for service personnel (samples of print  
quality problems are helpful).  
A copy of the sales slip or other proof of purchase to establish the  
warranty coverage period.  
Your name, address, and a phone number where you can be reached  
during the day.  
hp distribution center  
To order HP PSC software, a copy of the printed Reference Guide, a setup poster,  
or other customer-replaceable parts, do one of the following:  
In the U.S. or Canada, call (208) 323 2551.  
Visit this website:  
hp distribution center  
Download from Www.Somanuals.com. All Manuals Search And Download.  
49  
   
hp psc 2100 series  
get hp psc 2100 support  
Download from Www.Somanuals.com. All Manuals Search And Download.  
50  
warranty information  
hp psc 2100 series  
Duration of Limited Warranty (hardware and labor): 1 Year  
Duration of Limited Warranty (CD media): 90 Days  
Duration of Limited Warranty (ink cartridges): 90 Days  
warranty service  
express service  
To obtain HP express repair service, the customer must contact an HP service office  
or an HP Customer Support Center for basic troubleshooting first. See hp customer  
support on page 47 for steps to take before calling Customer Support.  
If a customer unit needs a minor part replacement and these parts can normally be  
replaced by the customer, the customer-replaceable components may be serviced  
through expedited part shipment. In this event, HP will prepay shipping charges, duty  
and taxes; provide telephone assistance on replacement of the component; and pay  
shipping charges, duty, and taxes for any part that HP asks to be returned.  
The HP Customer Support Center may direct customers to designated authorized  
service providers who are certified by HP to service the HP product.  
warranty upgrades  
Upgrade your standard factory warranty to a total of three years with the  
HP SUPPORTPACK. Service coverage begins on product purchase date and the  
pack must be purchased within the first 180 days of product purchase. This program  
offers phone support from 6:00 A.M. to 10:00 P.M. Mountain Standard Time (MST)  
Monday through Friday and 9:00 A.M. to 4:00 P.M. (MST) on Saturdays. If during  
your technical support call it is determined that you need a replacement product,  
then HP will ship you this product next business day free of charge. Available in U.S.  
only.  
For more information, please call 1-888-999-4747 or visit the following HP website:  
returning your hp psc 2100 series for service  
Before returning your HP PSC for service, you must call HP Customer Support. See hp customer  
support on page 47 for steps to take before calling Customer Support.  
warranty service  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
             
hp psc 2100 series  
hewlett-packard limited global warranty statement  
extent of limited  
warranty  
Hewlett-Packard (“HP”) warrants to the end-user customer (“Customer”) that each HP PSC 2100  
Series product (“Product”), including related software, accessories, media, and supplies, shall  
be free from defects in material and workmanship for the duration, which begins on the date of  
purchase by the Customer.  
For each hardware Product, the duration of HP’s limited warranty is one year for parts and one  
year for labor. For all other Products, the duration of HP’s limited warranty for both parts and  
labor is ninety days.  
For each software Product, HP’s limited warranty applies only to a failure to execute  
programming instructions. HP does not warrant that the operation of any Product shall be  
uninterrupted or error free.  
HP’s limited warranty covers only those defects which arise as a result of normal use of a Product,  
and does not cover any other problems, including those which arise as a result of (a) improper  
maintenance or modification, (b) software, accessories, media, or supplies not provided or  
supported by HP, or (c) operation outside the Product’s specifications.  
For any hardware Product, the use of a non-HP ink cartridge or a refilled ink cartridge does not  
affect either the warranty to the Customer or any HP support contract with the Customer.  
However, if Product failure or damage is attributable to the use of a non-HP or refilled ink  
cartridge, HP shall charge its standard labor and materials charges to service the Product for the  
failure or damage.  
If HP receives, during the applicable warranty period, notice of a defect in any Product, HP shall  
either repair or replace the defective Product, at HP’s option. Where labor charges are not  
covered by HP’s limited warranty, repairs shall be at HP’s standard charges for labor.  
If HP is unable to repair or replace, as applicable, a defective Product which is covered by HP’s  
warranty, HP shall, within a reasonable time after being notified of the defect, refund the  
purchase price for the Product.  
HP shall have no obligation to repair, replace, or refund until the Customer returns the defective  
Product to HP.  
Any replacement product may be either new or like-new, provided that it has functionality at least  
equal to that of the Product being replaced.  
HP products, including each Product, may contain remanufactured parts, components, or  
materials equivalent to new in performance.  
HP's limited warranty for each Product is valid in any country or locality where HP has a support  
presence for the Product and where HP has marketed the Product. The level of warranty service  
may vary according to local standards. HP shall have no obligation to alter the form, fit, or  
function of the Product in order to make it operate in a country or locality for which the Product  
was never intended to operate.  
limitations of  
warranty  
TO THE EXTENT ALLOWED BY LOCAL LAW, NEITHER HP NOR ITS THIRD PARTY SUPPLIERS  
MAKE ANY OTHER WARRANTY OR CONDITION OF ANY KIND, WHETHER EXPRESS OR  
IMPLIED, WITH RESPECT TO THE COVERED HP PRODUCTS, AND SPECIFICALLY DISCLAIM THE  
IMPLIED WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY,  
AND FITNESS FOR A PARTICULAR PURPOSE.  
limitations of  
liability  
To the extent allowed by local law, the remedies provided in this Limited Warranty Statement are  
the Customer’s sole and exclusive remedies.  
TO THE EXTENT ALLOWED BY LOCAL LAW, EXCEPT FOR THE OBLIGATIONS SPECIFICALLY  
SET FORTH IN THIS LIMITED WARRANTY STATEMENT, IN NO EVENT SHALL HP OR ITS THIRD  
PARTY SUPPLIERS BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR  
CONSEQUENTIAL DAMAGES, WHETHER BASED ON CONTRACT, TORT, OR ANY OTHER  
LEGAL THEORY AND WHETHER ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
local law  
This Limited Warranty Statement gives the Customer specific legal rights. The Customer may also  
have other rights which vary from state to state in the United States, from province to province in  
Canada, and from country to country elsewhere in the world.  
To the extent this Limited Warranty Statement is inconsistent with local law, this Statement shall  
be deemed modified to be consistent with such local law. Under such local law, certain  
disclaimers and limitations of this Statement may not apply to the Customer. For example, some  
states in the United States, as well as some governments outside the United States (including  
provinces in Canada), may:  
warranty information  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
hp psc 2100 series  
Preclude the disclaimers and limitations in this Statement from limiting the statutory rights of a  
consumer (e.g. the United Kingdom);  
Otherwise restrict the ability of a manufacturer to enforce such disclaimers or limitations; or  
Grant the Customer additional warranty rights, specify the duration of implied warranties which  
the manufacturer cannot disclaim, or not allow limitations on the duration of implied warranties.  
FOR CONSUMER TRANSACTIONS IN AUSTRALIA AND NEW ZEALAND, THE TERMS IN THIS  
LIMITED WARRANTY STATEMENT, EXCEPT TO THE EXTENT LAWFULLY PERMITTED, DO NOT  
EXCLUDE, RESTRICT, OR MODIFY, AND ARE IN ADDITION TO, THE MANDATORY  
STATUTORY RIGHTS APPLICABLE TO THE SALE OF THE COVERED HP PRODUCTS TO SUCH  
CUSTOMERS.  
hewlett-packard limited global warranty statement  
Download from Www.Somanuals.com. All Manuals Search And Download.  
53  
hp psc 2100 series  
warranty information  
Download from Www.Somanuals.com. All Manuals Search And Download.  
54  
index  
enhance photo colors 17  
front-panel display 35  
Numerics  
4-by-6 inch photo paper, load 11, 13  
copy  
A
change default settings 17  
fit to page 18  
lighten 16  
make a poster 19  
make copies 15  
adjust settings  
copy 17  
view angle 35  
align cartridges 29  
B
banner paper  
tips on loading 13  
best copy quality 16  
buttons  
cancel 4  
copies (1-99) 4, 16  
front panel 3  
quality 4, 16  
start scan 4, 23  
reduce 16  
set number of copies 16  
several copies on a page 19  
special copy jobs 18  
C
cancel  
button 4  
copy 21  
scan 24  
customer support 47  
cartridges  
align 29  
replace 27  
clean  
declaration of conformity 46  
default settings  
change for copy 17  
restore factory defaults 29  
director review 4  
print cartridges 29  
the exterior 26  
the glass 25  
the lid backing 25  
color  
intensity of copy 17  
continuous paper  
tips on loading 13  
contrast  
E
enhancements 17  
index  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
hp psc 2100 series  
enlarge a copy 16, 18  
envelopes  
paper 8  
load 10  
F
photo paper 11, 13  
factory defaults  
change for copying 17  
restore 29  
fast copy quality 16  
fit to page 18  
front panel  
M
features 3  
maintenance  
scan from 23  
front-panel display 3  
scroll speed 30  
set language 35  
set view angle 35  
clean print cartridges 29  
clean the exterior 26  
clean the glass 25  
power save mode time 30  
replace print cartridges 27  
restore factory defaults 29  
G
glass cleaning 25  
greeting cards, load 12  
H
hagaki cards  
load 12  
size 41  
help 1  
hp customer support 47  
hp director 46  
hp distribution center 49  
hp papers, tips on loading 12  
hp photo & imaging gallery 24  
hp psc software 4  
N
normal copy quality 16  
O
order print cartridges 59  
how to place on glass 7  
multiple copies 19  
I
ink cartridges, see print cartridges  
inkjet paper, load 12  
intensity of color copy 17  
introduction  
to the Director 4  
iron-on T-shirt transfers 20  
change default size for copy 13  
change the type 13  
load 8  
L
labels  
load 12  
recommended 8  
lamp power save mode 30  
language setup 35  
lid backing, clean 25  
light power save mode 30  
lighten or darken copies 16  
load  
set the size 14  
tips on loading 1213  
paper size, change for copy 13  
paper tray, load 8  
phone numbers, support services 47  
photo mode enhancement 18  
photo paper, load 11, 13  
change the paper type 13  
index  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
photos  
copy 18  
enhance copy 17  
postcards, load 11, 12  
poster  
view angle 35  
settings  
best copy quality 16  
copy a photo 18  
copy defaults 17  
copy to 19  
power save mode setup 30  
power save mode time 30  
print  
continuous (banner) paper, tips on loading 13  
envelopes 10  
self-test report 26  
print cartridge protector 27  
print cartridges  
fast copy quality 16  
lighten a copy 16  
normal copy quality 16  
power save mode 30  
prompt delay 30  
scroll speed 30  
text enhancement 17  
align 29  
clean 29  
protector 27  
replace 27  
store 27  
prompt delay, set 30  
Q
quality 16  
quick start  
introduction 4  
remove and reinstall 37  
copy 21  
scan 24  
review the director 4  
use with a computer 4  
R
reduce a copy 16, 18  
regulatory information 44  
reinstall software 37  
remove software 37  
reports  
self-test 26  
restore factory settings 29  
returning your hp psc for service 51  
telephone numbers 47  
recommend choices 8  
S
save, a scanned image 23  
scan  
troubleshooting, remove and reinstall software 37  
buttons 3  
different destination 24  
from front panel 23  
stop 24  
front panel features 3  
scroll speed setup 30  
self-test report 26  
set  
U
USB cable installation 36  
language and country 35  
number of copies 16  
power save mode 30  
prompt delay 30  
V
view angle, set 35  
W
warranty 47  
index  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
hp psc 2100 series  
service 51  
statement 52  
upgrades 51  
index  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
order supplies  
Use the following information for ordering supplies for your HP PSC  
2100 Series.  
order media  
To order media such as HP Premium Inkjet Paper, HP Premium Inkjet  
Transparency Film, HP Iron-On T-shirt Transfer paper, or HP Greeting Cards,  
see one of the following:  
Select other countries, then click Yes to leave hpshopping.com.  
From this website, you can access hpshopping.com for your specific  
language or region.  
order print  
cartridges  
The following table lists the print cartridges that you can use with the HP PSC  
2100 Series. Use the following information to determine which print  
cartridge to order.  
print cartridges  
hp reorder number  
HP black print cartridge  
HP black print cartridge  
#56, 19 ml black print cartridge  
#27, 10 ml black print cartridge  
HP color print cartridge  
HP photo color print cartridge  
HP tricolor print cartridge  
#57, 17 ml color print cartridge  
#58, 17 ml color print cartridge  
#28, 8 ml color print cartridge  
If you have Internet access, you can get more information from the  
HP website at:  
order supplies  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Visit the hp psc information center  
It has everything you need to get the most value from your HP PSC.  
Technical Support  
Supplies and Ordering Information  
Project Tips  
Ways to Enhance Your Product  
© 2002 Hewlett-Packard Company  
Printed in the U.S.A., Mexico, Germany, Singapore, or China.  
*C8644-90213*  
*C8644-90213*  
C8644-90213  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Biscuit Joiner G0604 User Manual
Harbor Freight Tools Drill 42977 User Manual
Harman Kardon Home Theater System DPR 1001 User Manual
Health O Meter Scale HDL150 05 User Manual
Honeywell Boiler L8151A User Manual
Honeywell Burner Q314 User Manual
Honeywell Home Security System EKZ008200B User Manual
HP Hewlett Packard All in One Printer RX4610 User Manual
HP Hewlett Packard Laptop 345561 001 User Manual
Impex Fitness Equipment IGS 8858 User Manual