Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety
Instructions
• READ INSTRUCTIONS - All the safety and
operating instructions should be read before the
product is operated.
• LOCATION - The appliance should be
installed in a stable location.
• OVERLOADING - Do not overload wall
outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
• NONUSE PERIODS - The power cord of the
appliance should be unplugged from the outlet
when left unused for a long period of time.
• RETAIN INSTRUCTIONS - The safety and
operating instructions should be retained for
future reference.
• OBJECT AND LIQUID ENTRY - Never push
objects of any kind into this product through
openings as they may touch dangerous voltage
points or short-out parts that could result in a fire
or electric shock. Never spill liquid of any kind
on the product.
• GROUNDING OR POLARIZATION
• HEED WARNINGS - All warnings on the
product and in the operating instructions should
be adhered to.
-
If this product is equipped with a polarized
alternating current line plug (a plug having one
blade wider than the other), it will fit into the
outlet only one way. This is a safety feature. If
you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should
still fail to fit, contact your electrician to replace
your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
• FOLLOW INSTRUCTIONS - All operating
and use instructions should be followed.
• SERVICING - Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service
personnel.
• CLEANING - Unplug this product from the wall
outlet before cleaning. The product should be
cleaned only with a polishing cloth or a soft dry
cloth. Never clean with furniture wax, benzene
secticides or other volatile liquids since they
may corrode the cabinet.
• DAMAGE REQUIRING SERVICE - Unplug
this product from the wall outlet and refer
servicing to qualified service personnel under
the following conditions:
- If this product is equipped with a three-wire
grounding type plug, a plug having a third
(grounding) pin, it will only fit into a grounding
type power outlet. This is a safety feature. If
you are unable to insert the plug into the outlet,
contact your electrician to replace your
obsolete outlet. Do not defeat the safety
purpose of the grounding type plug.
• ATTACHMENTS - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
- When the power-supply cord or plug is
damaged.
• WATER AND MOISTURE - Do not use this
product near water - for example, near a
bathtub, wash bowl, kitchen sink, or laundry tub;
in a wet basement; or near a swimming pool;
and the like.
- If liquid has been spilled, or objects have fallen
into the product.
• POWER-CORD PROTECTION - Power-
supply cords should be routed so that they are
not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the product.
- If the product has been exposed to rain or
water.
• ACCESSORIES - Do not place this product on
an unstable cart, stand, tripod, bracket, or table.
The product may fall, causing serious injury to a
child or adult, and serious damage to the
product. Use only with a cart, stand, tripod,
bracket, or table recommended by the
manufacturer, or sold with the product. Any
mounting of the product should follow the
manufacturer's instructions, and should use a
mounting accessory recommended by the
manufacturer.
- If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the
operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the product
to its normal operation.
• OUTDOOR ANTENNA GROUNDING - If an
outside antenna or cable system is connected to
the product, be sure the antenna or cable
system is grounded so as to provide some
protection against voltage surges and built-up
static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit,
size of grounding conductors, location of
antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode. See Figure A.
- If the product has been dropped or damaged
in any way.
- When the product exhibits a distinct change in
performance - this indicates a need for service.
• CART - A product and cart
combination should be
moved with care. Quick
stops, excessive force,
and uneven surfaces
may cause the product
and cart combination to
overturn.
• REPLACEMENT PARTS - When
replacement parts are required, be sure the
service technician has used replacement parts
specified by the manufacturer or have the same
characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or
other hazards.
• LIGHTNING - For added protection for this
product during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the
antenna or cable system. This will prevent
damage to the product due to lightning and
power-line surges.
• VENTILATION - Slots and openings in the
cabinet are provided for ventilation and to
ensure reliable operation of the product and to
protect it from overheating, and these openings
must not be blocked or covered. The openings
should never be blocked by placing the product
on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in
installation such as a bookcase or rack unless
proper ventilation is provided or the
• SAFETY CHECK - Upon completion of any
service or repairs to this product, ask the service
technician to perform safety checks to
determine that the product is in proper operating
condition.
• WALL OR CEILING MOUNTING - The
product should not be mounted to a wall or
ceiling.
• POWER LINES - An outside antenna system
should not be located in the vicinity of overhead
power lines or other electric light or power
circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna
system, extreme care should be taken to keep
from touching such power lines or circuits as
contact with them might be fatal.
• HEAT - The product should be situated away
from heat sources such as radiators, heat
registers, stoves, or other products (including
amplifiers) that produce heat.
manufacturer's instructions have been adhered to.
• POWER SOURCES - This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company.
Important Safety Instructions
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Before You Start
Recording
Simple recording
OTR (One touch Timer Recording)
...................................................
...................................................
.................
....................................................
What's in the box
Putting the batteries in the remote control
Using the remote control
Compatible Discs
5
5
5
6
24
24
25
.....
.....................................
..................................................
Timer Recording
Timer review - changing and erasing
....................................................
record settings
26
27
................
Recording from a digital camcorder
Controls & Display
.............................................................
......................................................................
..............................................................
Front Panel
Display
Rear Panel
7
8
9
10
Editing
......................
...........................
Editing a DVD+RW or DVD+R disc
28
28
28
29
29
30
30
31
31
32
32
33
33
34
........................................
Play disc (DVD+RW/DVD+R)
Rename disc (DVD+RW/DVD+R)
Remote Controller Unit
...................
...............................
..........
Erase disc (DVD+RW only)
Record a new title (DVD+RW/DVD+R)
Connection
........................
.................................
Overwrite disc (DVD+RW only)
.........
.........
................
Connection for Video Output Terminals
Connection for Audio Output Terminals
Connection for A/V Input Terminals
13
14
14
14
Lock disc (DVD+RW only)
Finalize disc (DVD+R only)
................................
...................
Editing a title of DVD+RW or DVD+R
...................
Connection for DV IN and USB IN
............................
.............................
Play title (DVD+RW/DVD+R)
Edit title (DVD+RW/DVD+R)
Rename title (DVD+RW/DVD+R)
....................
................................
Basic Playback
Erase title (DVD+RW only)
...............................
Playing a DVD or VCD disc
Playing a DVD+RW or DVD+R disc
15
15
15
16
16
17
.........................
Overwrite title (DVD+RW only)
................
....................
Playing an Audio CD or MP3 disc
............................................
Playing a Picture CD
Using the Setup Menu
................................................
Playing JPEG disc
Playing MPEG4 Movie
...................................................
....................................................................
..................................................................
......................................................................
................................................................
........................................................
.........................................................................
Basic Operations
General
Playback
Record
Language
Channel Scan
Clock
35
35
36
37
38
38
40
........................................
Advanced Playback
......................................
......................................
..................................
.........
...............
..................................
Fast Forward/Backward
Skip Forward/Backward
Slow Forward (DVD/VCD)
Frame by Frame Playback (DVD/VCD)
Program Playback (Audio CD/MP3)
OSD (On Screen Display)
Selecting Subtitles (DVD only)
Selecting Audio Languages (DVD only)
18
18
18
18
19
20
20
21
21
22
22
23
23
Additional Information
.........................................................
.....................................................
Specifications
Troubleshooting
41
42
..........................
.........
.................................
Repeating a Title, Chapter
.......................................
A-B Repeat (DVD only)
...............................
WARRANTY and SUPPORT
44
........................................................
ZOOM Screen
Switching the Camera Angle (DVD only)
Direct Search (DVD/VCD)
.......
..................................
Table of Contents
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
What's in the box
Close the cover.
3
Thank you for buying this product. Please confirm
that the following accessories are in the box when
you open it.
Accessories
Using the remote control
Keep in mind the following when using the
remote control :
• Make sure that there are no obstacles between
the remote and the remote sensor on the unit.
• Remote operation may become unreliable if
strong sunlight or fluorescent light is shining on
the unit's remote sensor.
Scart cable
• Remote controllers for different devices can
interfere with each other. Avoid using remotes for
other equipment located close to this unit.
• Replace the batteries when you notice a fall off in
the operating range of the remote.
Remote control
AA dry cell batteries x 2
NOTE
RF cable
Incorrect use of batteries can result in hazards such
as leakage and bursting. Please observe the following:
Operating instruction
• Don't mix new and old batteries together.
Audio/Video cable
(this manual)
• Don't use different kinds of batteries together-although
they may look similar, different batteries may have
different voltages.
• Make sure that the plus and minus ends of each battery
match the indications in the battery compartment.
• Remove batteries from equipment that isn't going to be
used for a month or more.
Putting the batteries in the remote
control
• When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction's rules that apply in your country or area.
Open the battery compartment
cover on the back of
the remote control.
1
Insert two AA/R03 batteries into
the battery compartment
following the indications
(+, -) inside the
2
compartment.
Before You Start
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Start
DVD Video regions
Compatible Discs
All DVD Video discs carry a region mark on the case
somewhere that indicates which region of the world
the disc is compatible with. Your DVD player also has
a region mark, which you can find on the rear panel.
Discs from incompatible regions will not play in this
player. Discs marked ALL will play in any player.
Any disc that displays one of the following logos
should play in this system. Other formats, including
DVD-RAM, DVD-ROM, DVD-Audio, SACD and
CD-ROM(except those containing MP3 files) will
not play.
DVD Video compatibility
MP3 compatibility information
• Single-sided or double-sided
discs.
• Single layer or dual layer discs.
• Dolby Digital, DTS, MPEG or
Linear PCM digital audio.
• The CD-ROM must be ISO 9660 compatible.
• Mono or stereo MPEG-1 Audio Layer 3 format,
32 or 44.1 or 48kHz fixed bit-rate. Incompatible
files will not play.
• Compatible with variable bit-rate (VBR) files.
• This player is compatible with multi-session discs.
• Audio encoded at 128Kbps should sound close to
regular audio CD quality. Although this player will
play 48K to 320K bit-rate.
• MPEG-2 digital video Discs are generally divided
into one or more titles. Titles may be further
subdivided into chapters.
DVD-R compatibility
• MP3 tracks, the sound quality becomes
noticeably worse at lower bitrates.
• This unit can play DVD-R
discs recorded as DVD video
format.
DVD+R/RW compatibility
• This unit can play DVD+R and
DVD+RW discs recorded as
DVD video format.
Audio CD compatibility
• 12cm or 8cm discs
• Linear PCM digital audio
• CD-Audio, CD-R and CD-RW
formatted CDs are divided into
• Also this unit can record the
video and audio signal in
DVD+R or DVD+RW disc.
tracks.(This unit can play CD-R
and CD-RW discs recorded in CD Audio or Video
CD format, or with MP3 audio files, or Kodak
picture CD files.)
MPEG4 CD compatibility
• Also this can play MPEG4
disc.
Video CD compatibility
• 12cm or 8cm discs
JPEG CD compatibility
• MPEG-1 digital audio
• MPEG-1 digital video
• Video CDs are divided into tracks.
• JPEG Photo in Discs.
CAUTION
Super VCD compatibility
• DVD-R and CD-R/RW discs recorded using a personal
computer may not play if the disc is damaged or dirty, or
if there is dirt or condensation on the player's lens.
• If you record a disc using a personal computer, even if it
is recorded in a compatible format, there are cases in
which it may not play because of the settings of the
application software used to create the disc.
• 12cm or 8cm discs
• MPEG-1 digital audio
• MPEG-2 digital video
• Super VCDs are divided into
tracks.
• Some of MPEG4 movies could not be played depending
on the encoding methods.
Before You Start
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
Front Panel
1
2 3 4 5
6
13 12 11
10
9
8
7
DISC TRAY
COMPOSITE VIDEO IN
1
2
3
4
5
6
7
Put a disc to be played in here.
8
9
Connect to Composite Video Output of
camcorder.
OPEN/CLOSE
To open or close the disc tray.
DV IN
Digital input jack for use with a digital video
camcorder. This jack is for connection to DV
camcorder only. It is not compatible with
other digital equipments.
PLAY/PAUSE
Press to start or pause a disc playing.
STOP
USB IN
Press to stop a disc playing.
10
11
12
13
Digital input jack for use with a USB memory.
RECORD
Press to start a disc recording.
NEXT (Skip Forward)
To skip to the next chapter or track.
FL DISPLAY
Displays operation status.
STANDBY/ON
To switch the unit on or into Standby.
AUDIO IN
Connect to Audio Output of camcorder.
PREVIOUS (Skip Backward)
To skip to the previous chapter or track.
Controls & Display
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
Display
1
2 3
4 5
6
7
8
9
10
TIMER Recording Indicator
CHAPTER Indicator
1
2
Illuminates when timer recording is on.
6
Chapter number for DVD playback.
ANGLE
ROTATION
Rotates when the disc is spinning.
Indicates the current disc being played is
viewed as multi angle.
This function only works for discs having
scenes recorded at different angles.
7
8
REPEAT Indicator
Illuminates when the current play mode is
under repeat title, chapter, track (single), A-B,
disc (all) respectively.
DOLBY DIGITAL Indicator
Indicates Dolby Digital 5.1CH playback.
3
4
5
PROGRAM
Indicates the program playback.
DTS Indicator
Indicates DTS Digital output.
9
OPERATING Information
Indicates title, Chapter and Track number
and Time, TV channel.
TITLE Indicator
Title number for DVD playback.
10
Controls & Display
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
Rear Panel
1
2
3 4
5
6 7
8 9
10
11
AC POWER CORD
COMPONENT VIDEO OUT
1
2
Connect to the wall outlet.
6
7
Connect to Component Video Inputs of TV.
AUDIO IN
DIGITAL AUDIO OUT
Connect COAXIAL OUT to Digital Audio
Input (coaxial type) of Audio AMP.
Or connect OPTICAL OUT to Digital Audio
Input (optical type) of Audio AMP.
Connect to Audio Output of VCR or Set-Top
Box.
VIDEO IN
3
Connect CVBS to Composite Video Output
of VCR or Set-Top Box.
Or connect S-VIDEO to S-Video Output of
VCR or Set-Top Box.
ANT IN
Connect to external antenna.
8
9
ANT OUT
Connect to Antenna Input of TV.
VIDEO OUT
Connect CVBS to Composite Video Input of
TV or monitor.
Or connect S-VIDEO to S-Video Input of TV
or monitor.
S-Video provides better picture quality than
composite video.
4
EURO AV OUT
Connect to Euro AV input of TV.
10
11
EURO AV IN/OUT
Connect to Euro AV in/out of AV equipment
such as VCR, DVD player, etc.
AUDIO OUT
5
Connect to Audio Inputs of TV.
Controls & Display
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
A
Remote Controller Unit
A-B
To repeat a certain section.
ANGLE
To view with a different frame angle.
ARROW (
)
To select a menu item.
AUDIO
To select the audio language when playing a DVD
disc.
AV IN
To select an external audio and video input to use
for recording.
C
CHANNEL DOWN / UP
Used to select the preset TV channels.
CL(CLEAR)
Used when discarding wrong number input.
CM SKIP
For moving to a scene after 30 seconds.
(about the length of a typical TV commercial)
D
DIMMER
This adjusts the FL display brightness of front
panel.
DISPLAY
To view the Title, Chapter, Track information or
Subtitle Language, Audio Language, Repeat
mode.
DV IN
To select a digital A/V input from a DV camcorder.
Controls & Display
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
E
P
EDIT-DISC
PAUSE ( )
To edit a disc : Rename disc, Erase disc, Overwrite
disc.
When you press this button during playback, you
can view the still picture.
Each time you press this button, you can see one
frame at a time.
EDIT-TITLE
To edit a title : Insert chapter, Remove chapter,
Hide chapter.
PLAY (
)
To play the loaded disc.
ENTER
Used to select the menu item.
PREV (
)
To skip to the previous chapter or track.
F
PROGRAM
To playback in a specific order.
FWD (
)
Press for fast forward scanning during playback.
R
G
REC (Record)
To record TV programs.
GOTO
REC MODE
To select the record quality.
To move to a specific time in a track or title.
M
REPEAT
To select a repeat mode.
MENU
REPLAY
Used to display the contents menu of the loaded
DVD disc.
To play back again from the scene of previous 10
seconds.
It is a useful function to learn a foreign language.
MUTE
To turn on/off audio outputs.
RETURN
To move to a previous menu. When using VCD 2.0
and SVCD with PBC function, this button works
as a RETURN button.
N
NEXT (
)
To skip to the next chapter or track.
REV (
)
NUMERIC (0~9)
Press for fast reverse scanning during playback.
Used from the menu to select, Title/Chapter search
and direct track number.
O
OPEN /CLOSE (
)
Press button to open or close the disc tray. If
pressed under STANDBY, power is automatically
turned on and the tray is opened.
Controls & Display
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Display
S
SETUP
To change the initial settings.
SLOW
To play the disc contnts in slow forward.
STANDBY/ON ( )
Activates the unit POWER ON or into STANDBY.
STOP (
)
To stop a disc playing.
SUBTITLE
To select the subtitle language.
T
TIMER REC
To set a timer recording.
TITLE
To display the title menu of the DVD.
TV/DVD
To switch between “TV mode” in which you get the
picture and sound from the recorder’s tuner,
and “DVD mode” in which you get the picture and
sound from DVD disc.
TV MODE
Set up TV type according to type supported by
user's TV.
Each time you press this button repeatedly, the TV
type will change among NTSC, PAL and
progressive scan.
Z
ZOOM
Enlarges DVD screen image up to 2 times.
Controls & Display
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connection for Video Output Terminals
Composite Video (CVBS) Output
The composite video output is supported by most televisions.
The composite video jack on TV is usually yellow and may be labeled video, CVBS, composite.
EURO AV Output
The Euro AV terminal can be connected to TV equipped with Euro AV connector.
The audio transmitted on the Euro AV is stereo sound.
S-Video Output
The S-Video output can be connected to the TV equipped with an S-Video input.
The S-Video jack on TV may be labeled S-Video, Y/C, S-VHS.
The S-Video provides better picture than the composite video.
Component Video Output
The component video output can be connected to the TV equipped with component input.
The component video jacks on TV may be labeled YUV, Y/Pb/Pr, Y/Cb/Cr and may be green, blue, red.
The component video provides the best picture.
If you want to view a progressive scan TV via Y/Pb/Pr, set “Component output” to “Progressive” from
GENERAL SETUP menu.
NOTE
• RF OUT, is labeled TO TV, is signal pass-thru only.
• A S-Video cable, Scart cable, optical cable and DV cable are not supplied.
Connection
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection
Connection for Audio Output Terminals
You can enjoy the Dolby surround sound by
connecting digital audio output to the audio
amplifier.
Analog Audio Output
Connect the Audio output to the Audio Input of TV.
Digital Audio Output
Use digital audio outputs for connection with
Dolby Digital or DTS decoder.
From the Digital Audio Output menu, select
“RAW” or “LPCM” according to your decoder.
Connection for A/V Input Terminals
You can record programs from AV system such
as VCR, DVD player, Camcorder, etc.
Audio Input
Connect the Audio Input to the Audio Output of
AV system.
Video Input
Connect the Composite Video or S-Video Input to
the Composite Video or S-Video Output of AV
system.
Or connect the Euro AV IN/OUT to the Euro AV
OUT of AV system.
Connection for DV IN and USB IN
Using the DV IN, it is possible to read digitally the
contents of DV tapes.
DV Input
Connect the DV IN to the DV in/out jack on your
camcorder using a DV cable(not supplied).
USB Input
Insert the USB memory in the USB jack of this
recorder.
Connection
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Playing a DVD or VCD disc
Playing an Audio CD or MP3 disc
Press POWER button to turn on your DVD
Recorder.
Load an Audio CD or MP3 disc.
The first track is played back automatically.
The track list is displayed on the TV screen.
1
1
Press OPEN/CLOSE button to open the
disc tray.
2
Put a disc on the disc tray with logo-printed
side up.
Press OPEN/CLOSE button again to
close the disc tray.
The DVDR will load the disc automatically.
3
The TV screen shows disc menu.
<Audio CD>
4
5
In case of VCD 1.0, the disc is played back
automatically.
Select the desired item by using , ,
,
or 0 to 9 button, then press ENTER button to
start playback.
Playing a DVD+RW or DVD+R disc
Load a DVD+RW or DVD+R disc.
<MP3 disc>
1
The menu screen is displayed automatically.
Select the desired track by using
button.
or
2
3
If you press
or
button during
playing back the MP3 disc, you can see the
next track list or the previous track list.
If you press
or
button during
playing back the Audio CD, you can hear the
next song or the previous song.
Press ENTER button to start playback.
Select the desired program by using or
button.
2
3
Press ENTER button to start playback.
Basic Playback
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Playing a Picture CD
Playing JPEG files from USB
memory
Load a Picture CD.
1
2
The JPEG file is played in order automatically.
Make sure your USB memory is connected to USB
IN jack on the front panel.
Press MENU button to see the file list.
You can see 9 thumbnail pictures on TV
screen.
Press DV IN button twice to change to
USB mode.
1
The JPEG file is played in order automatically
after loading a JPEG file from USB memory.
It takes a few minutes to load the data
depending on the data volume in USB memory.
Press STOP button to see th file list.
2
The file list is displayed on the TV screen.
Select the desired picture by using
,
,
,
button.
button to see the next file list.
button to see the previous file list.
3
Press
Press
Press ENTER button to start playback.
4
5
Select the desired file by using
button.
or
3
Image rotation and zoom
You can rotate the image to the left or right
If you press
or
button, you can see
the next file list or the previous file list.
by using
,
,
,
button.
Also you can enlarge the image up to 400%
Press ENTER button to start playback.
The JPEG file is played in order automatically.
or reduce it up to 12% by using
button.
or
4
5
Image rotation and zoom.
You can rotate the image to the left or right
To start playback, press PLAY button.
The JPEG file is played in order
automatically.
6
7
by using , ,
enlarge the image up to 400% or reduce it up
to 12% by using or button.
,
button. Also you can
Transition mode
17 slideshow transition modes are provided.
Use ANGLE button to switch the slideshow
transition mode.
To start playback, press PLAY button.
The JPEG file is played in order automatically.
6
NOTE
• If the size of a file is over 1.5MB or the length of file name
is over 8 characters, it may not be played back.
• This DVD recorder supports only USB 1.1 and it can read
up to 128MB USB memory.
Basic Playback
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Playback
Playing MPEG4 Movie
Load a MPEG4 disc.
1
Press Enter button after selecting the desired
movie using
,
button.
2
NOTE
• Some of MPEG4 movie could not be played depending
on encoding method.
Basic Playback
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Fast Forward/Backward
Slow Forward (DVD/VCD)
Use this function to play the DISC contents in fast
forward or fast reverse. During searching, audio
will be muted (except Audio CD).
Use this function to play the DISC contents in slow
forward. During searching, audio will be muted.
Press SLOW button during play mode.
The disc contents is played slowly forward.
Press
or
button during play mode.
1
2
1
Each time you press button, playback speed
changes as below.
Each time you press SLOW button, playback
speed changes as below.
Press PLAY button to resume normal
playback.
3
Frame by Frame Playback
(DVD/VCD)
Press PLAY button to resume normal
playback.
2
Press PAUSE button during play mode.
The DVD Recorder pauses the playing
temporarily.
1
2
3
Skip Forward/Backward
Press PAUSE button repeatedly.
Each time you press, one frame is displayed
at a time.
Use this function to move to the next or previous
chapter for DVD, track for VCD and Audio CD.
Press PLAY button to resume normal
playback.
Press
button during play mode.
1
2
The DVD Recorder starts playing the
previous chapter or track.
NOTE
Press
button during play mode.
• There is no sound when viewing Frame playback or Slow
playback.
The DVD Recorder starts playing the next
chapter or track.
• MP3 CD and Audio CD do not have Frame Playback and
Slow Playback feature.
Advanced Playback
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Press PROGRAM button to add the
selected track to the program list.
Program Playback (Audio CD/MP3)
3
This feature lets you program the play order of
folders, tracks on a disc.
Load a Audio CD or MP3 disc.
1
The first track is played back automatically.
The track list is displayed on the TV screen.
<Audio CD>
<Audio CD>
<MP3 disc>
To delete a track from the program list, select
the track you want to delete in program list,
then press PROGRAM button.
<MP3 disc>
Repeat step 2, 3 to build up a program list.
4
5
Select the desired track by using
button in the track list.
or
Press ENTER button to play the program
list after moving a cursor to the program
list.
Program playback remains active until you
open the disc or turn off the DVD recorder.
2
If you press
or
button during
playing back the MP3 disc, you can see the
next track list or the previous track list.
If you press
or
button during
playing back the Audio CD, you can hear the
next song or the previous song.
Advanced Playback
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
OSD (On Screen Display)
Selecting Subtitles (DVD only)
You can display the playback status on TV screen
as follows ; Title, Chapter number, Playing time.
It is possible to change the subtitle language to a
different language from the one selected at the
initial settings. This operation works only with discs
on which multiple subtitle languages are recorded.
If the loaded disc supports multiple subtitles, you
can select the subtitle language.
Press DISPLAY button during playback.
1
Title, Chapter number, Audio language and
elapsed time appear on TV screen.
Press SUBTITLE button during playing.
1
2
The subtitle is displayed on the bottom of the
screen.
Press DISPLAY button again.
The information of playback appears on TV
screen in detail.
2
You can change the subtitle language,
Each time you press SUBTITLE button, the
subtitle language is changed.
chapter, and so on using
,
,
,
ENTER button.
To turn off the on-screen display, press
DISPLAY button.
3
Advanced Playback
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Selecting Audio Languages
(DVD only)
Repeating a Title, Chapter
Use this button to repeat the chapter/title for DVD
or track/disc for VCD and Audio CD.
It is possible to change the audio language to a
different language from the one selected at the
initial settings. This operation works only with discs
on which multiple audio languages are recorded.
If the loaded disc supports multiple audio
Press REPEAT button during playback.
1
2
The repeat information is displayed on the
top of the screen.
languages, you can select the audio language.
Each time you press REPEAT button, the
repeat mode is changed as follows.
Press AUDIO button during playback.
1
2
The audio information is displayed on the top
of the screen.
Each time you press AUDIO button, the
audio language is changed.
NOTE
• Language function is disc dependent. In this case, the
language should be selected via the disc menu.
NOTE
• With some DVD discs, there may be times when repeat
playback is not possible.
Advanced Playback
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
A-B Repeat (DVD only)
ZOOM Screen
Use this function to repeat playback of a selected
segment. This is very useful for studying foreign
languages because it repeats the selected
segment until canceled.
Enlarges DVD/VCD screen image up to 2 times.
Press ZOOM button during playback.
1
2
The picture is zoomed.
Press A-B button at the point where
Each time you press ZOOM button, the
zoom mode will be changed :
repeat play is to start.
The starting point of your selected segment
is set up.
1
Press A-B button again at the point where
repeat play is to end.
The ending point is set up.
The ending point is set up and the segment
is played repeatedly from A to B.
2
To cancel the A-B repeating, press A-B
button once more.
The playing state changes to normal.
3
You can move the image by using
button.
,
,
,
3
4
NOTE
To cancel the zoom mode, press ZOOM
button repeatedly until the player resume
normal playback.
• We recommend you set up the desired segment within
a minimum 5 seconds for smooth repeat play.
Advanced Playback
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Playback
Switching the Camera Angle
(DVD only)
Direct Search (DVD/VCD)
You can select a specific chapter or title to play.
Also you can move to a specific time in a track or
title.
When a DVD contains recorded multiple angles of
a scene, you can select the Angle function.
Press GOTO button during playback.
The playback information appears on TV
screen.
Press ANGLE button during playing.
1
2
1
2
Available angles of the current scene will be
displayed on the top of screen and
the angle is changed.
Each time you press GOTO button, the
search mode is changed as follows.
Each time you press ANGLE button, the
angle is changed.
NOTE
• You can only change the angle for DVDs that provide
multiple angles of scenes.
• The angle function will not work on DVD video discs
that do not contain recorded multiple angles.
• The number of angles varies from disc to disc.
Title Search
3
• Select “TITLE” by pressing GOTO button.
• Enter the title number by using numeric 0 to
9 button.
• Press ENTER button to confirm. It starts to
play back from the specified title.
Chapter Search
• Select “CHAPTER” by pressing GOTO
button.
• Enter the chapter number by using numeric
0 to 9 button.
• Press ENTER button to confirm. It starts to
play back from the specified chapter.
Time Search
• Select “TIME” by pressing GOTO button.
• Enter the time by using numeric 0 to 9
button.
For example, if you want to go to 0:31:25,
press the numeric buttons in this order
(0, 3, 1, 2, 5) button.
• Press ENTER button to confirm. It starts to
play back from the specified time.
Advanced Playback
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Press REC button to start your recording.
Simple recording
4
5
Press PAUSE button if you want to stop the
recording for a short while.
Press REC button again to continue
recording.
To record TV programs, you should search TV
channels first.
Load a DVD+RW or DVD+R disc with
enough free space for the recording.
Press STOP button to stop your recording.
1
Press AV IN button to choose the A/V
NOTE
input you want to record.
Every time this button is pressed, A/V input is
changed :
2
• A DVD+R/DVD+RW can record for up to 6 hours, up to
49 titles.
• For a new DVD+R/DVD+RW, it will take a couple of
minutes to format it before recording.
• If your source is copy-protected, you will not be able to
record it.
• If a DVD+RW was previously recorded on another DVD
recorder or PC, it requires that you erase it before
recording.
• The OSD remains on TV screen during recording.
If you want to turn off the OSD, press DISPLAY button.
OTR (One touch Timer Recording)
During simple recording, press REC
button.
If you want to record the TV program, select
TV IN.
And choose the station you want to record by
pressing CHANNEL – or CHANNEL +
button.
1
Every time you press REC button, the
recording time will increase by 30 minutes.
It is possible to record for up to 6 hours if
there is enough room on the disc and
the REC mode is SLP.
Press REC MODE button to select the
record quality.
Every time this button is pressed, the record
quality is changed :
The DVD Recorder will stop automatically
after recording for a specific time.
3
If you want to cancel OTR, press STOP
button.
2
• HQ - High Quality, you can record for up to
1 hour on a blank disc.
• SP - Standard Play, you can record for up
to 2 hours on a blank disc.
• EP - Extended Play, you can record for up
to 4 hours on a blank disc.
• SLP - Super Long Play, you can record for
up to 6 hours on a blank disc.
Recording
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Select the Record Frequency by pressing
button, press ENTER button.
Select how often you want to make the
Timer Recording
5
For timer recordings, the clock, date, and stations
must be set correctly.
Load a DVD+RW or DVD+R disc with enough free
space for the recording.
recording, for example, once, daily or weekly,
by pressing
or
button, and press
ENTER button to confirm.
- If you selected the Once recording, press
button and press ENTER button.
Enter the date by using 0 to 9 button.
- If you selected the Weekly recording, press
button and press ENTER button.
Press TIMER REC button.
1
Enter the day of week by using 0 to 9 button.
Select the Start time by pressing
button, press ENTER button.
Enter the Start time by using 0 to 9 button,
and press ENTER button to confirm.
6
7
8
Select the End time by pressing
button, press ENTER button.
Enter the End time by using 0 to 9 button,
and press ENTER button to confirm.
Select an unused program by pressing
or
button, then press ENTER button.
2
Switch VPS/PDC “ON” or “OFF” by using
,
and ENTER button.
(If “Source” is not set to TV channel, this
function is not available.)
The VPS/PDC system automatically adjusts
the recording time so that even if a program
is not running to schedule you won't miss it.
Note that VPS/PDC may not work with every
station and that Optimized Recording willl not
work if VPS/PDC is on.
Press ENTER button after selecting “OK” by
Press ENTER button. The sub-menu
appears.
using
button if all the settings are correct.
9
3
4
Select the Source by using
or
button,
Switch your DVD Recorder off by pressing
STANDBY/ON button.
and press ENTER button to confirm.
10
Select the Quality by pressing
press ENTER button.
button,
Select the Quality by using
or
button,
and press ENTER button to confirm.
Recording
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
NOTE
Timer review - changing and
erasing record settings
• You can switch your DVD Recorder on again if you want
to set the timer to record another program. Remember to
switch the DVD Recorder off when you have finished.
• To stop a timer recording which has already started,
press STANDBY/ON button.
Press TIMER REC button.
1
• You can pre-program the schedule to record up to 8
programs.
• We recommend you set up the recording time over 5
minutes.
Select the program you want to change or
erase by pressing
or
button.
2
3
Erasing a setting
Press CL button to erase.
Changing a setting
Press ENTER button.
Select the details you want to change by
pressing
button.
or
button, and press ENTER
Change the settings by using
,
or the
number buttons 0 to 9.
When you have made all the changes, press
ENTER button.
Press ENTER button after selecting
“Confirm” using
are correct.
button if all the settings
4
5
Press TIMER REC button to exit.
Recording
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
Recording from a digital
camcorder
You can record the audio and video signal from a
DV camcorder via DV IN.
Make sure your digital camcorder is connected to
DV IN jack on the front panel.
Also set the camcorder to PLAY (or VCR) mode.
Load a DVD+RW or DVD+R disc with
enough free space for the recording.
1
Press DV IN button.
2
Press REC MODE button to select the record
quality.
3
Find the place on the camcorder tape that
you want to start recording from.
You can use the remote controller for this
recorder to control the camcorder using
4
PLAY, STOP, PAUSE,
,
button.
For best results, press PAUSE button at the
point from which you want to record.
Press REC button to start your recording.
5
6
Press PAUSE button if you want to stop the
recording for a short while.
Press again REC button to continue
recording.
Press STOP button to stop your recording.
NOTE
• Depending on the connected camcorder, you may not
be able to control it using the remote control supplied
with this recorder.
Recording
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing a DVD+RW or
DVD+R disc
Rename disc (DVD+RW/DVD+R)
Press ENTER button after selecting
“Rename disc” by using
The keyboard will show on the screen.
or
button.
1
Insert a recorded DVD+RW or DVD+R disc
on the disc tray.
1
Press EDIT-DISC button, the Disc Edit menu
will show on the screen.
2
Select a letter which you want to input by
using button, and press ENTER
button to confirm it.
,
,
,
2
3
4
<DVD+RW>
Repeat step 2.
The maximum length of the disc name is up
to 9 characters.
The control bars of the last line in the
keyboard is for edit command.
If the inputting of letters is finished, press
ENTER button after selecting “OK”.
<DVD+R>
Play disc (DVD+RW/DVD+R)
You can play back the entire disc from the
beginning to the end.
Press ENTER button after selecting
“Play” by using
It starts to play back the beginning of the
disc.
or
button.
1
Editing
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Erase disc (DVD+RW only)
Record a new title (DVD+RW/DVD+R)
Press ENTER button after selecting
Press ENTER button after selecting “Record
“Erase disc” by using
The pop-up menu will show on the screen.
or
button.
a new title” by using
or
button.
1
1
2
3
It will be changed from DVD mode to AV
input mode.
Press AV IN button to choose the A/V
input you want to record.
Every time this button is pressed, A/V input is
changed :
Press ENTER button to erase the
contents of a disc after selecting “Yes” by
2
using
,
button.
It takes a few minutes to erase the disc.
NOTE
• The Erase function only works on DVD+RW discs.
If you want to record the TV program, select
TV IN.
And choose the station you want to record by
pressing CHANNEL – or CHANNEL +
button.
Press REC MODE button to select the record
quality.
4
5
Press REC button to start your recording.
It starts to record on the free space of the
disc.
Press STOP button to stop your recording.
6
Editing
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Overwrite disc (DVD+RW only)
Lock disc (DVD+RW only)
You can lock your current disc to play back it in
other DVD recorders. If you do not lock your
DVD+RW, you can only play back it in this DVD
recorder.
Press ENTER button after selecting
“Overwrite disc” by using
or
button.
1
2
3
It will be changed from DVD mode to AV
input mode.
Press ENTER button after selecting “Lock
disc” by using
or
button.
1
2
3
Press AV IN button to choose the A/V
input you want to record.
Every time this button is pressed, A/V input is
changed :
It takes 2~3 minutes to lock the disc.
If the disc is locked, you can not make any
changes any more except play it back.
If you want to unlock the locked disc,
insert a locked DVD+RW disc on the disc
tray.
Press EDIT-DISC button, the Disc Edit menu
will show on the screen.
If you want to record the TV program, select
TV IN.
And choose the station you want to record by
pressing CHANNEL – or CHANNEL +
button.
Press REC MODE button to select the record
quality.
4
5
Press REC button to start your recording.
It starts to record from the beginning of the
disc.
Press ENTER button after selecting
“Unlock disc” by using
It takes a few minutes to unlock the disc.
Press STOP button to stop your recording.
6
or
button.
NOTE
• Recorded programs will be erased from the beginning if
overwritten.
NOTE
• You have to lock your DVD+RW disc to play back it in
other DVD recorders.
Editing
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Editing a title of DVD+RW
or DVD+R
Finalize disc (DVD+R only)
If you want to make your DVD+R disc compatible
with other DVD players, you should finalize the
disc.
Insert a recorded DVD+RW or DVD+R
disc on the disc tray.
The menu screen is displayed automatically.
1
Press ENTER button after selecting
“Finalize disc” by using
The pop-up menu will show on the screen.
or
button.
1
2
Select one title to edit by using
button.
or
2
3
Press ENTER button to confirm after
selecting “Yes” by using
It takes a few minutes to finalize the disc.
Press EDIT-TITLE or button, the Title Edit
menu will show on the screen.
,
button.
NOTE
• The FINALIZE function only works once in DVD+R disc.
• If a DVD+R has been finalized, you can not record or
edit the DVD+R any more.
<DVD+RW>
<DVD+R>
Editing
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
2
To delete a chapter marker, select
Play title (DVD+RW/DVD+R)
“Delete marker” by using
or
button.
You can play back the selected title.
You can search the chapter by using
or button.
Press ENTER button at the chapter
Press ENTER button after selecting “Play
title” by using
or
button.
1
where you would like to delete.
It starts to play back from the selected title.
3
To delete all chapter markers, select
“Delete all markers” by using
or
button.
Edit title (DVD+RW/DVD+R)
Press ENTER button to confirm it.
Press ENTER button after selecting “Edit
• This is a useful function
It is a useful function to hide commercials.
title” by using
or
button.
1
It starts to play back and the pop-up menu
will show on the screen.
Select “Hide chapter” by using
or
button, and press ENTER button.
If current chapter is the hidden chapter,
“Unhide chapter” is displayed on the menu
instead of “Hide chapter”. In this case, you
can unhide the chapter by pressing ENTER
button after selecting “Unhide chapter”.
• Index picture
You can change the thumbnail for the
selected title.
Press ENTER button at the point where you
prefer to be the thumbnail.
• Split title
• Select an available title
You can divide the current title to 2 titles.
Press ENTER button at the point where you
would like to divide. It takes a few minutes
to divide the title.
Select to choose an available title by
inputting numbers.
• Select an available chapter
Select to choose an available chapter by
inputting numbers.
• T-Elapsed
You can see the elapsed time.
• Play
Control playback by various setting such as
Fast forward, Fast reverse, Slow, etc.
Press STOP button after finishing to edit
the title.
It takes a few minutes to update the disc.
2
• Chapter marker
You can insert a chapter or delete it.
Press ENTER or button, the pop-up
menu will show on the screen.
1
To insert a new chapter marker, select
“Insert marker” by using
or
button.
You can search a scene by using
,
or PLAY button.
Press ENTER button at the point where
you would like to insert a new chapter.
Editing
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Rename title (DVD+RW/DVD+R)
Erase title (DVD+RW only)
Press ENTER button after selecting
Press ENTER button after selecting
“Erase title” by using or button.
The pop-up menu will show on the screen.
“Rename title” by using
or
button.
1
1
The keyboard will show on the screen.
Select a letter which you want to input by
using button, and press ENTER
button to confirm it.
Press ENTER button to erase the
contents of a title after selecting “Yes” by
,
,
,
2
3
4
2
using
,
button.
It takes a few minutes to erase the title.
Repeat step 2.
The maximum length of the disc name is 9
characters.
NOTE
• The Erase function only works on DVD+RW discs.
The control bars of the last line in the
keyboard is for edit command.
If the inputting of letters is finished, press
ENTER button after selecting “OK”.
Editing
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing
Overwrite title (DVD+RW only)
Press ENTER button after selecting
“Overwrite title” by using
or
button.
1
2
3
It will be changed from DVD mode to AV
input mode.
Press AV IN button to choose the A/V
input you want to record.
Every time this button is pressed, A/V input is
changed :
If you want to record the TV program, select
TV IN.
And choose the station you want to record by
pressing CHANNEL – or CHANNEL +
button.
Press REC MODE button to select the record
quality.
4
5
Press REC button to start your recording.
It starts to record from the beginning of the
selected title.
Press STOP button to stop your recording.
6
NOTE
• The recorded program will be erased from the
beginning for recording time.
Editing
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Once the initial settings have been completed, the
DVD recorder can always be operated under the
same conditions whenever the power is switched
on. These settings are called SETUP data that are
easily modified and stored using the SETUP menu.
The SETUP menu includes the information for
Playback, Record, Language, Channel Scan.
General
Basic Operations
Press SETUP button during stop mode. And use
,
,
,
and ENTER button to navigate and
select options. The current setting for any option is
marked with a colored box.
SCREEN SAVER
1
If a bright picture does not move for a long
time, the TV may be damaged. If this state is
continued on longer than 5 minutes, the
screen saver works when ON is selected.
The screen saver protects the CRT (Cathode
Ray Tube) from damage by displaying a
moving DVD logo continuously on the screen.
Press STOP button, if the disc is being
played.
1
To call the SETUP menu, press SETUP
button.
2
Select the desired item by using
or
NOTE
button, then press ENTER button.
3
4
5
• The monitor screen of a projector or projection TV is easily
burned out if a static picture is displayed for a long time.
Be careful not to allow the monitor screen to be burned
out when you set the SCREEN SAVER mode to “OFF”.
Select the desired sub item by using
and ENTER button.
,
,
,
Press SETUP button after you have made all
settings.
COMPONENT OUTPUT
When viewing Progressive Scan TV via
Y/Pb/Pr connector, set to “Progressive”.
2
NOTE
• Depending on the disc, some setup menu selections
may not work properly.
EURO AV OUTPUT
3
4
Set to “YUV” to view in component video via
Y/Pb/Pr connector. When using EURO AV
connector RGB signal, set to “RGB”.
VIDEO OUTPUT FORMAT
Set up TV type according to type supported
by your TV or monitor.
If your TV is for PAL, set to “PAL”. If your TV
is for NTSC, set to “NTSC”.
FACTORY RESET
5
Returns the DVD Recorder back to factory
default settings.
Using the Setup Menu
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
RATING LEVEL & CHANGE PASSWORD
Playback
2
This function is to disable the playing of
specified DVD discs that are unsuitable for
children. There are a total of 8 levels. If the
level is 8, the contents of the disc are suitable
for adult. If the level is 1, the contents of the
disc are suitable for children.
Used to adjust the level of parental lock.
Once selected, whenever you play a disc,
the selected rating level is compared to the
level on the disc. If the level you selected is
greater than the level of the disc, you may
play the loaded disc. If not, you may not play
the disc. To set appropriate rating level, do
the following instructions.
TV ASPECT RATIO
1
If you have a widescreen TV, select the
“16:9” setting. The widescreen DVD disc is
shown using the full screen area. When
playing the DVD disc recorded in
1
Press ENTER button after selecting
“Rating level” by using
or
button.
conventional format(4:3), the settings on your
TV will determine how the material is
presented. (See the manual that came with
your TV for details on what options are
available).
The password window will be displayed
on TV screen.
If you have a conventional TV, choose either
“Letter Box” or “Pan Scan”.
In Letter Box mode, the widescreen DVD
disc is shown with black bars at the top and
bottom of the screen. Pan Scan chops the
sides off widescreen material to make it fit
the 4:3 screen (so even though the picture
looks larger on the screen, you are actually
seeing less of the movie).
2
It asks for the password.
Enter the current password in 4 digits by
using 0 to 9 button, then press ENTER
button.
If you have not changed the password,
enter 0, 0, 0, 0.
NOTE
• Some disc will not allow you to change the aspect ratio.
3
After pressing ENTER button, select the
proper rating level by using
or
button, and then press ENTER button.
Using the Setup Menu
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
4
5
Press ENTER button to confirm after
selecting “OK”. A rating level change will
be done.
Record
If you want to change the password,
press ENTER button after selecting
“NEW” in above step 3.
AUTO CHAPTER MARKER
1
2
When “Auto Chapter Marker” is ON, chapters
are created automatically within a title at five-
minute intervals.
Chapters can also be added or removed
manually through the EDIT TITLE button
features.
6
7
Enter the new password in 4 digits by
using 0 to 9 button.
Select “Confirm column” by pressing
button, and re-enter new password for
confirm.
For details, see section “Editing a title”.
DEFAULT QUALITY
The record quality offers 4 quality level :
8
After selecting “OK”, press ENTER
button. Password change is finished.
• HQ : High Quality, you can record for up to
1 hour in a blank disc.
DIGITAL AUDIO OUTPUT
3
• SP : Standard Play, you can record for up
to 2 hours in a blank disc.
• RAW (Bit Stream) : The original audio
stream recorded on the disc is output
through the digital audio out connector.
• EP : Extended Play, you can record for up
to 4 hours in a blank disc.
• LPCM : The decoded audio stream is
outputted through the digital audio out
connector.
• SLP : Super Long Play, you can record for
up to 6 hours in a blank disc.
Using the Setup Menu
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Language
Channel Scan
OSD LANGUAGE
TV SYSTEM
1
2
This item is used to select the language for
On-Screen Display messages that will be
displayed on the TV screen. When your
desired language is selected, all OSD
messages are displayed in the selected
language.
1
2
Select your TV system by using
button, then press ENTER button.
or
Refer to the followings.
• PAL B/G
: Germany, Italy, Portugal,
Spain, Denmark,
Netherlands, Norway,
Sweden, Switzerland,
Greece, Turkey, Finland,
Israel, UAE, Australia,
Singapore
DISC MENU
Set this value to the preferred disc menu
language. If a disc menu language is
selected, whenever you start playing a new
disc, the selected disc menu language is
played(if the selected language is contained
in the disc).
• PAL D/K
• PAL I
: Rumania
: U.K, Hong Kong, South
Africa
• SECAM L : France
• SECAM D/K: Russia, Poland, Hungary,
Czechoslovakia, Yugoslavia,
Bulgaria
SUBTITLE
Set this value to the preferred subtitle
language. If a subtitle language is selected,
whenever you start playing a new disc, the
selected subtitle language is played(if the
selected language is contained in the disc).
3
4
SCAN CHANNELS
Press ENTER button after selecting “SCAN”
by pressing
or
button.
It will search channels automatically.
If the broadcasting is found during auto
searching, it is stored automatically.
PLAYBACK AUDIO
Set this value to the preferred audio
language. If an audio language is selected,
whenever you start playing a new disc, the
selected audio language is played(if the
selected language is contained in the disc).
Using the Setup Menu
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
Frequency
NOTE
• Performing a new channel search will erase and replace
all previously stored channels.
If the captured signal is bad, you can search the
channel again.
1
2
Select “Frequency” by using
or
button.
MODIFY CHANNEL INFORMATION
(If there is no captured channel, this feature
is not available.)
Press or button, and it starts to search
channels automatically.
If the broadcasting is found during searching, it
stops to search.
If you want to stop searching, press STOP
button.
3
Press ENTER button after selecting
“Modify channel information” by
3-1
pressing
or
button.
The information of the current channel will
show on the screen.
Sound system
Set the sound system used for the current channel.
Select the channel you want to modify by
pressing CHANNEL - or CHANNEL +
button.
3-2
1
Select “Sound system” by using
button, and press ENTER button.
or
2
Select the sound system by using
or
button, and press ENTER button.
Skip
If you want to skip a captured channel, select
“Yes”.
Fine tune
If the captured signal is not good, you can tune the
channel fine.
Editing the channel name
1
2
Select “Fine tune” by using
or
button.
1
Press ENTER button after selecting “Name”
by using or button.
Tune the channel fine by pressing or
button.
The keyboard will show on the screen.
Each time
or button is pressed, the
2
3
Select a letter which you want to input by using
channel frequency decreases or increases by
50KHz.
,
,
,
button, and press ENTER button
to confirm it.
Press ENTER button after selecting “OK”
Repeat step 2.
3-3
using
button if all the settings are correct.
The maximum length of the channel name is up
to 5 characters.
4
The control bars of the last line in the
keyboard is for edit command.
If the inputting of letters is finished, press
ENTER button after selecting “OK”.
Using the Setup Menu
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Setup Menu
CHANNEL SWAPPING
(If there is no captured channel, this feature
Clock
4
is not available.)
This feature lets you swap the channel
assignments of different programs.
1
Press ENTER button after selecting
“SWAP” by pressing or button.
Press ENTER after selecting “Date” by using
or
button.
1
2
Enter the date in order of day, month, year by
using 0 to 9 button, and press ENTER
button.
2
Select a preset station to swap using
or button, and press ENTER or
button.
After selecting “Time”, press ENTER button.
3
4
Enter the time in order of hour, minute,
second by using 0 to 9 button, and press
ENTER button to save and return.
3
4
5
Select the position to insert it using
or
button, and press ENTER or button.
If you want to swap more presets, repeat
step 2 to 3.
Press RETURN button to finish and exit.
Using the Setup Menu
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Specifications
DVD/DVD-R, VCD/SVCD, CD-DA, CD, MP3,
CD-R/CD-RW, DVD+R/RW
MPEG-1, MPEG-2, MPEG-4, JPEG
PAL / SECAM
Supported disc types
Supported video formats
TV system
Power requirements
Power consumption
Weight
AC 100 V-240 V, 50/60 Hz
30 W / 3 W(in standby mode)
3.1 kg
General
Dimensions
420(W) x 44(H) x 290(D) mm
Operating temperature
Operating humidity
Recording format
Recordable discs
Programs
5°C to 35°C
10 % to 75 % (no condensation)
DVD VIDEO
Recording
Timer
DVD+R, DVD+RW
8 Programs
Clock
Quartz lock (24-hour digital display)
Power off memory
Approx. 1 hour 30 min.
This connector provides the video and audio
AV connector input / output x 1
AV connector output x 1
Euro AV connectors
(21-pin connector)
signals for connection to a compatible color
TV or monitor.
Y (luminance) - Output level
C (color) - Output level
Jacks
1.0 Vp-p (75 Ω)
0.286 Vp-p (75 Ω)
S-VIDEO jack
S-Video output
Video Output
Output level
1.0 Vp-p (75 Ω)
RCA jack
Jacks
Component video output (Y, Cb/Pb, Cr/Pr)
Output level
Y: 1.0 Vp-p (75 Ω)
Cb/Pb, Cr/Pr : 0.7 Vp-p (75 Ω)
Output level
2 Vrms (1 kHz, 0 dB)
Audio output
Number of channels
Jacks
2
RCA jack
Frequency response
S/N ratio
4 Hz to 44 kHz (DVD fs: 96 kHz)
100 dB
Audio characteristics
Dynamic range
95 dB
Total harmonic distortion
Optical digital output
Coaxial digital output
IEEE 1394 standard
Audio/Video cable
RF Cable
0.03 %
Optical digital jack
Digital output
DV input
RCA jack
4 pin
1
1
1
2
1
1
Remote control unit
"AA" size batteries
Operating Instructions
SCART cable
Accessories
NOTE
• The specifications and design of this product are subject to change without notice, due to improvement.
Additional Information
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Troubleshooting
Incorrect operation is often mistaken for trouble or malfunction. If you think that there is something wrong with
this component, check the points below. Sometimes the trouble may lie in another component. Inspect the
other components and electrical appliances being used. If the trouble cannot be rectified after checking the
items below, ask your nearest authorized service center or your dealer to carry out repair work.
Problem
Solution
The disc is ejected automatically after
loading.
• Dirty or damaged disc
• Align the disc properly.
Disc not seated properly in the disc
guide.
• If the region number on a DVD-Video disc does not match the number on the
player, the disc cannot be used.
Incompatible region number.
• Allow time for condensation to evaporate. Avoid using the player near an air-
Condensation inside the player.
conditioning unit.
• Playback is not possible.
Disc is loaded upside down.
mark appears on screen.
• Reload the disc with the label side face up.
• The operation is prohibited by the player and / or disc.
• Switch the power off once using the front panel STANDBY/ON button and then
switch on again using the front panel STANDBY/ON button.
• Disconnect the power plug and reinsert it back into the wall.
Picture playback stops and the
operation buttons cannot be used.
• Some settings can be changed while a disc is playing, but are not effective
until the disc is stopped then restarted.
• This is not a malfunction. Make the same setting when the player is stopped.
New settings made in the Setup screen
menus while a disc is playing are
ineffective.
• When the power is cut due to power failure or by unplugging the power cord,
settings will be canceled.
Settings are canceled.
• Incorrect video connections. Check that connections are correct and that plugs
are inserted fully.
• TV/monitor or AV amplifier settings are incorrect. Check the instruction manual
of the connected equipment.
• The Component output menu is set to progressive but your TV/monitor is not
compatible with progressive scan.
No picture / No color
• Reconnect the player to your TV using a composite or S-Video cord and set
the TV to appropriate input.
• The type of the disc is wrong, it's not a DVD+RW or DVD+R disc.
• The disc is recorded fully.
The DVD recorder cannot record.
• The DVD+R has been finailized.
Screen is stretched or aspect does not
change.
• The TV aspect ratio setting in the Setup menu is incorrect. Set the TV aspect
ratio option to match the TV/monitor you're using.
• This player is compatible with Macro-Vision System copy guard. Some discs
include a copy prevention signal, and when this type of disc is played back,
stripes etc., may appear on some sections of the picture depending on the TV.
Picture disturbance during playback or
dark.
Additional Information
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Problem
Solution
• The remote control is too far from the player, or the angle with the remote
sensor is too wide.
The remote control doesn't seem to
work.
Use the remote within its operating range.
• The batteries are exhausted. Put in new batteries.
Some DVD discs do not output digital audio.
• Switch your amplifier to the player's analog outputs.
Dirt, dust, etc. on the disc.
• Clean the disc.
Interconnects are not fully inserted into the terminals (or are not connected).
• Check that all interconnects are firmly inserted.
Dirty or oxidized plugs/terminals.
• Clean the plugs/terminals.
No audio, or audio is distorted.
Incorrect audio cable connection.
• Check the audio connections.
Player's output is connected to the amplifier's phono (turntable) inputs.
• Connect to any set of inputs except phono.
The disc is paused.
• Press (play) to exit the pause mode.
Incorrect amplifier settings.
• Check that the volume is turned up ,that the speakers are on, the input function
set correctly, etc.
Incorrect Audio menu settings.
The analog audio is OK, but there
appears to be no digital audio signal.
• Make sure that the Digital Audio Out setting is set to RAW or LPCM.
Check that the RAW or LPCM settings are suitable for your amplifier
-check the amp's instruction manual.
Noticeable difference in DVD and CD
volume.
• DVDs and CDs use different recording methods. This is not a malfunction.
• If this unit is connected to a non-DTS compatible amplifier or decoder using a
digital audio cable, please connect to a DTS compatible amplifier or decoder.
If you do not do this, noise will be output if you try and play a DTS disc.
• If this unit is connected to a DTS-compatible amplifier or decoder using a
digital audio cable, check the amplifier settings, and that the cable is properly
connected.
No DTS audio output.
• If the disc is a recordable CD, make sure that the disc is finalized.
• Check that the track(s)are in the MPEG1 Audio Layer 3 format.
• Check that the sampling rate of the track(s)are 32 or 44.1 or 48kHz.
The disc containing the MP3 tracks
won't play.
Some MP3 tracks appear to be missing
from a disc.
• If a track name does not end in ".mp3" or ".MP3", this player will not recognize
it as an MP3 track.
NOTE
• Static electricity or other external influences may cause malfunctioning of this unit. In this case, unplug the power cord and then
plug back in. This will usually reset the unit for proper operation. If this does not correct the problem, please consult your
nearest service center.
Additional Information
43
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY and
SUPPORT
Updates
Please check out regularly our web site for further updates and assistance about this product: www.hb-direct.com.
Important safety information
Read these instructions carefully and pay attention to all warnings and guidelines.
Do not overload electrical sockets or extension cables. Overloading can result in fire or electric shock.
Never insert objects into the DVD player's cabinet door. They might come into contact with dangerous voltage points or short-circuit
components, which can cause fire or electric shock.
Do not spill liquids on the DVD player.
If the DVD Player does not function normally, or if it emits unusual sounds or odors, pull out the plug immediately and contact an
authorized technician.
Do not attempt to service the DVD player yourself. If you open or dismantle the shielding, you expose yourself to dangerous voltage and
other hazards. All maintenance must be carried out by qualified service technicians.
Environmental information
The system is made of recyclable materials which can be reused if disassembled by authorized personnel.
Please follow local regulations for the disposal of packaging materials, used batteries and discarded units.
Copyright
This product contains copyright technology which is protected pursuant to the patents that are the property of Macrovision Corporation and
other copyright holders. Any use of this copyright technology must be approved by Macrovision Corporation. The technology is intended
for use in the home unless otherwise approved by Macrovision Corporation. Breakdown and disassembly are prohibited.
Made under license from Dolby Laboratories. “Dolby” and the double “D” symbol are trademarks of Dolby Laboratories.
Warranty certificate
H&B provides a twelve (12) month warranty from the date of purchase against material and manufacturing defects.
In the event of defects covered by the warranty, the product must be returned to the dealer that sold the product.
If any problems arise, information on our authorized service centers is available the dealer who sold the product.
Terms of Warranty
1. The warranty is only valid on presentation of a correctly completed warranty certificate and sales ticket, and if the serial number on the
product is fully legible.
2. The obligations of H&B are limited either to repair or replacement of defective components. The repair or replacement of defective
components is based on an assessment by H&B.
Exchange is only possible if the repair cannot be performed.
3. Warranty repairs must be performed by an authorized H&B dealer, or an authorized service centre. No remuneration is provided for
repairs performed by unauthorized workshops.
Any repairs or damage to the product caused by unauthorized intervention are not covered by this warranty.
4. This product will not be viewed as defective, either in materials or in manufacture, if adaptation to national, local, technical or safety-
related requirements is required in countries other than the specific country for which the product was originally designed and
manufactured.
5. This warranty does not cover these types of adaptations, and no remuneration will be offered for these types of adaptations or for any
consequential damages. The warranty does not cover the following:
a. Periodic inspection, maintenance and repair or replacement of parts resulting from normal wear.
b. Costs connected to transport, disassembly or installation of the product.
c. Misuse, including use for other purposes than was intended or faulty installation.
d. Damage caused by lightning, water, fire, natural catastrophes, war, insurrection, incorrect line voltage, insufficient ventilation or
other causes beyond the control of H&B.
6. This warranty applies to every legal owner of the product during the warranty perio.
Distributor
H&B products are distributed by:
Bat 566 93400 Saint Ouen FRANCE
JPF Entertainment
Tel + 33 1 49 489 340
Fax + 33 1 40 109 599
WARRANTY and SUPPORT
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
P/N : 72001021100
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Hamilton Beach Coffeemaker 49444 User Manual
Harman Kardon Stereo Receiver AVR 510 User Manual
Honeywell Burner Q179A User Manual
Honeywell Fan HT 380 Series User Manual
HP Hewlett Packard Computer Drive mv2040 User Manual
HP Hewlett Packard Switch AA RSB6B TE User Manual
Hunter Fan Air Cleaner 30795 User Manual
Hunter Fan Thermostat F42213 User Manual
Husqvarna Trimmer 250PS User Manual
Impex Home Gym TR 2 User Manual