12" SLIP ROLL
MODEL G7148
INSTRUCTION MANUAL
COPYRIGHT © OCTOBER, 2001 BY GRIZZLY INDUSTRIAL, INC.
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
PRINTED IN CHINA
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL INFORMATION
The specifications, drawings, and photographs
Commentary
illustrated in this manual represent the Model
G7148 as supplied when the manual was pre-
pared. However, owing to Grizzly’s policy of con-
tinuous improvement, changes may be made at
any time with no obligation on the part of Grizzly.
Whenever possible, though, we send manual
updates to all owners of a particular tool or
machine. Should you receive one, we urge you to
insert the new information with the old and keep
it for reference.
Grizzly Industrial, Inc. is proud to offer the Model
G7148 12" Slip Roll. This tool is part of Grizzly’s
growing family of fine machinery. When used
according to the guidelines stated in this manual,
you can expect years of trouble-free, enjoyable
operation.
We are also pleased to provide this manual with
the Model G7148. It was written to guide you
through assembly, review safety considerations,
and cover general operating procedures. It repre-
sents our latest effort to produce the best docu-
mentation possible. If you have any criticisms
that you feel we should address in our next print-
ing, please write to us at the address below:
Read the manual before
assembly and operation.
Become familiar with
the machine and its
operation before begin-
ning any work. Serious
personal injury may
result if safety or opera-
tional information is not
understood or followed.
Grizzly Industrial, Inc.
Technical Documentation
P.O. Box 2069
C
⁄O
Bellingham, WA 98227
Most important, we stand behind our machines.
We have an excellent service department at your
disposal should the need arise.
Specifications
If you have any service questions or parts
requests, please call or write to us at the location
listed below.
Minimum Roll Diameter . . . . . . . . . . . . . . . . .1"
Maximum Roll Length . . . . . . . . . . . . . . . . .12"
Maximum Thickness (Steel) . . . . . . . .20 Gauge
Maximum Thickness (Brass) . . . . . . .18 Gauge
Maximum Thickness (Aluminum) . . . .17 Gauge
Grizzly Industrial, Inc.
1203 Lycoming Mall Circle
Pennsdale, PA 17756
Phone:(570) 546-9663
Fax:(800) 438-5901
Wire Forming Grooves . . . . . . . . . .1⁄8", 1⁄4", & 3⁄8
Weight . . . . . . . . . . . . . . . . . . . . . . . . .37.4 lbs
Overall Dimensions . . . . . . . . . .23" x 63⁄4" x 91⁄2
"
E-Mail: [email protected]
"
G7148 12" Slip Roll
-1-
Download from Www.Somanuals.com. All Manuals Search And Download.
Unpacking
Site Considerations
WORKBENCH LOAD
If you discover the slip roll is damaged after
you’ve signed for delivery, and the truck and dri-
ver are gone, you will need to file a freight claim
with the carrier. Save the containers and all pack-
ing materials for possible inspection by the carri-
er or its agent. Without the packing materials, fil-
ing a freight claim can be difficult. If you need
assistance determining whether you need to file a
freight claim, or with the procedure to file one,
please contact our Customer Service.
Your Model G7148 Slip Roll represents a rela-
tively small weight load. However, the combined
weight of materials and operating forces may be
too much for light duty workbenches. Make sure
your workbench is strong enough to handle the
anticipated weight of materials and operating
forces required to manipulate those materials.
WORKING CLEARANCES
Working clearances can be thought of as the dis-
tances between machines and obstacles that
allow safe operation of every machine without
limitation. Consider existing and anticipated
machine needs, size of material to be processed
through each machine, and space for auxiliary
stands and/or work tables. Also consider the rel-
ative position of each machine to one another for
efficient material handling. Be sure to allow your-
self sufficient room to safely operate your
machines in any foreseeable operation.
Cleaning
The slip roll is covered with a protective grease
for shipping purposes. Clean this with a non-sol-
vent cleaner such as the Model G7895 Citrus
Degreaser in the Grizzly catalog.
LIGHTING AND OUTLETS
Do not use gasoline or
other petroleum-based
solvents to clean with.
They have low flash
points which make them
extremely flammable. A
risk of explosion and
burning exists if these
products are used.
Serious personal injury
may occur.
Lighting should be bright enough to eliminate
shadow and prevent eye strain.
Make your shop “child
safe.” Ensure that your
workplace is inaccessible to
children by closing and
locking all entrances when
you are away. Never allow
visitors in your area when
assembling, adjusting or
operating equipment.
-2-
G7148 12" Slip Roll
Download from Www.Somanuals.com. All Manuals Search And Download.
MOUNTING & ADJUSTMENTS
Adjusting
Wear safety glasses dur-
ing the entire assembly
process. Failure to com-
ply may result in serious
personal injury.
MATERIAL THICKNESS
The distance between the fixed shaft and the
front movable shaft allow for varying thicknesses
of material.
Some metal parts may
have sharp edges on
them after they are
formed. Please examine
the edges of all metal
parts before handling
them. Failure to do so
could result in injury.
To increase the gap between the fixed shaft and
the front shaft, screw the front adjustment knobs
counterclockwise. Make sure you adjust both
knobs an equal amount. To decrease this dis-
tance, turn the knurled adjustment knobs clock-
wise. See Figure 1 for control locations and part
identification.
Rear Movable Shaft
Mounting Slip Roll
Fixed
Shaft
To mount the Model G7148 you will need to pro-
vide four 5⁄16" bolts, nuts, lock washers, and eight
flat washers. To determine the length of the bolts,
add 1" to the thickness of your workbench.
Front
Adjustment
Knob
Rear
Adjustment
1. Place the Model G7148 in the desired loca-
tion on the workbench. Make sure there is
enough room for the handle to move. (The
handle should be positioned on the right
when looking at the slip roll from the front.)
Make sure there is enough room behind the
slip roll to accommodate the material.
Knob
Front Movable Shaft
Figure 1.
ROLL DIAMETER
The distance between the fixed shaft and the rear
movable shaft control the diameter of the roll.
2. Mark the bench through the base, remove
11
the slip roll, and drill ⁄32" holes in the work-
bench.
To increase the distance between the fixed shaft
and the rear movable shaft, turn the knurled
adjustment knob counterclockwise. To decrease
this distance, move the adjustable knobs clock-
wise. Make sure you adjust both knobs an equal
amount.
3. Place the slip roll so the holes in the base
line up with the drilled holes, and install the
hardware in the following order: (1) Bolt, (2)
Flat Washer, (3) Slip Roll, (4) Workbench,
(5) Flat Washer, (6) Lock Washer, and (7)
Nut.
G7148 12" Slip Roll
-3-
Download from Www.Somanuals.com. All Manuals Search And Download.
SECTION 6: OPERATION
Wear safety glasses dur-
Keep loose clothing
rolled up and out of the
way of rollers and keep
hair pulled back.
ing all operations on the
slip roll. Failure to com-
ply may result in serious
personal injury.
Forming Wires
Using The Slip Roll
1. To form wires, select the smallest groove
that you can use (see grooves shown in
Figure 3) and put the edge of that wire on
the groove of the front movable shaft.
1. Perform all adjustments as required by the
material thickness and whether you are
engaging in straight rolls or cones.
2. Insert material edge between the fixed shaft
2. Turn the handle to process the wire.
and the front movable shaft.
3. If you are only rolling part of the wire, slide
out the release rod and pull the fixed shaft
forward. You can now remove the wire from
the slip roll.
3. Turn the handle to process the material.
4. If you are only performing partial rolls and
need to remove the material, slide out
release rod shown in Figure 2 and pull the
fixed shaft forward. You can now remove the
material from the slip roll.
4. If you want to form rings from wire, process
the wire until the end meets the length of the
stock. Remove the fixed shaft and cut the
wire where the end meets it.
Shaft
Release
Rod
Figure 2.
Figure 3. Wire grooves.
-4-
G7148 12" Slip Roll
Download from Www.Somanuals.com. All Manuals Search And Download.
MAINTENANCE
Lubrication
Grease Fitting
Occasionally lubricate the gears with a medium
weight wheel bearing grease through the grease
fitting shown in Figure 4. Frequency of lubrication
will depend on the amount of use.
Roller shafts should also be maintained with rust
protecting oil such as Boeshield® T-9 or Model
G2870/G2871 in the Grizzly catalog.
Figure 4. Grease fitting.
CLOSURE
shop is different and safety rules should be con-
sidered as they apply to your specific situation.
The following pages contain general machine
parts diagrams/lists, and Warranty/Return informa-
tion for your Model G7148 12" Slip Roll.
We recommend you keep a copy of our current
catalog for complete information regarding
Grizzly's warranty and return policy. If you need
additional technical information relating to this
machine, or if you need general assistance or
replacement parts, please contact the Service
Department listed in the General Information
section.
If you need parts or help in assembling your
machine, or if you need operational information,
we encourage you to call our Service
Department. Our trained service technicians will
be glad to help you.
If you have comments dealing specifically with
this manual, please write to our Bellingham,
Washington location using the address in the
General Information section. The specifications,
drawings, and photographs illustrated in this
manual represent the Model G7148 as supplied
when the manual was prepared. However, due to
Grizzly’s policy of continuous improvement,
changes may be made at any time with no oblig-
ation on the part of Grizzly. Whenever possible,
though, we send manual updates to all owners of
a particular tool or machine. Should you receive
one, add the new information to this manual and
keep it for reference.
Additional information sources are necessary to
realize the full potential of this machine. Trade
magazines, books and formal training are good
sources to begin with.
DO NOT MODIFY AND/OR USE THIS
MACHINE FOR ANY OTHER PURPOSE.
Modifications or improper use of this tool
will void the warranty. If you are confused
about any aspect of this machine, DO NOT
use it until all your questions have been
answered, or serious personal injury may
occur.
We have included some important safety mea-
sures that are essential to the operation of this
tool. While most safety measures are generally
universal, Grizzly reminds you that each work-
G7148 12" Slip Roll
-5-
Download from Www.Somanuals.com. All Manuals Search And Download.
REF
PART #
DESCRIPTION
REF
PART #
DESCRIPTION
01 P7148001 Adjustment Screw
02 P7148002 Grease Cup
03 P7148003 Rotating Support
04 P7148004 Adjustment Knob
05 P7148005 Left Stand
15 P7148015 Bushing
16 P7148016 Gear
17 P7148017 Fixed Shaft
18 P7148018 Front Movable Shaft
19A P7148019A Handle Assembly
23 P7148023 Pin
06 P7148006 Bushing
07 P7148007 Flat Key 4 x 8
08 P7148008 Rear Movable Shaft
09 P7148009 Handle Shaft
10 P7148010 Right Stand
11 P7148011 Release Rod
24 P7148024 Adjustment Knob
25 P7148025 Base
26 PW04M
27 PLW06M
28 PB047M
29 PSS02M
Flat Washer 10mm
Lock Washer 10mm
Hex Bolt M10-1.25 x 20
Setscrew M6-1 x 6
12 PW03M
14 PS11M
-6-
Flat Washer 6mm
Screw M6-1 x 16
G7148 12" Slip Roll
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY AND RETURNS
Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from
the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse,
negligence, accidents, repairs or alterations or lack of maintenance. This is Grizzly’s sole written warranty
and any and all warranties that may be implied by law, including any merchantability or fitness, for any par-
ticular purpose, are hereby limited to the duration of this written warranty. We do not warrant or represent
that the merchandise complies with the provisions of any law or acts unless the manufacturer so warrants.
In no event shall Grizzly’s liability under this warranty exceed the purchase price paid for the product and
any legal actions brought against Grizzly shall be tried in the State of Washington, County of Whatcom.
We shall in no event be liable for death, injuries to persons or property or for incidental, contingent, spe-
cial, or consequential damages arising from the use of our products.
To take advantage of this warranty, contact us by mail or phone and give us all the details. We will then
issue you a “Return Number,’’ which must be clearly posted on the outside as well as the inside of the car-
ton. We will not accept any item without this number. Proof of purchase must accompany the merchandise.
The manufacturers reserve the right to change specifications at any time because they constantly strive to
achieve better quality equipment. We make every effort to ensure that our products meet high quality and
durability standards and we hope you never need to use this warranty.
Please feel free to write or call us if you have any questions about the machine or the manual.
Thank you again for your business and continued support. We hope to serve you again soon.
G7148 12" Slip Roll
-7-
Download from Www.Somanuals.com. All Manuals Search And Download.
WARRANTY CARD
Name ____________________________________________________________________________________
Street ____________________________________________________________________________________
City ______________________________________________________________State________Zip_________
Phone Number_______________________E-Mail_______________________FAX________________________
MODEL # G7148 12" Slip Roll
Order #______________________________________________
The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services. Of
course, all information is strictly confidential.
1.
2.
How did you learn about us?
10.
Which benchtop tools do you own? Check all that apply.
___Advertisement
___Catalog
___Friend
___World Wide Web
___1" x 42" Belt Sander
___5" - 8" Drill Press
___8" Table Saw
___8" - 10" Bandsaw
___Disc/Belt Sander
___Mini Jointer
___6" - 8" Grinder
___Mini Lathe
___10" - 12" Thickness Planer
___Scroll Saw
___Other__________________________________________________
Which of the following magazines do you subscribe to.
___Spindle/Belt Sander
___Other__________________________________________________
How many of the machines checked above are Grizzly? ____________
Which portable/hand held power tools do you own? Check all that apply.
___American Woodworker
___Cabinetmaker
___Practical Homeowner
___Shop Notes
___Today’s Homeowner
___WOOD
___Wooden Boat
___Woodshop News
___Woodsmith
___Woodwork
___Woodworker
___Woodworker’s Journal
___Workbench
11.
12.
___Family Handyman
___Fine Homebuilding
___Fine Woodworking
___Home Handyman
___Journal of Light Construction
___Old House Journal
___Popular Mechanics
___Popular Science
___Belt Sander
___Biscuit Joiner
___Circular Saw
___Detail Sander
___Drill/Driver
___Orbital Sander
___Palm Sander
___Portable Planer
___Saber Saw
___Reciprocating Saw
___Router
___Popular Woodworking
___Miter Saw
___Other__________________________________________________
Which of the following woodworking/remodeling shows do you watch?
___Other__________________________________________________
What machines/supplies would you like Grizzly Industrial to carry?
3.
13.
___Backyard America
___Home Time
___The American Woodworker
___The New Yankee Workshop
___This Old House
___Woodwright’s Shop
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
___Other__________________________________________________
What is your annual household income?
4.
5.
___$20,000-$29,999
___$30,000-$39,999
___$40,000-$49,999
___$50,000-$59,999
___$60,000-$69,999
___$70,000-$79,999
___$80,000-$89,999
___$90,000 +
14.
15.
What new accessories would you like Grizzly Industrial to carry?
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
_________________________________________________________
What is your age group?
___20-29
___30-39
___40-49
___50-59
___60-69
___70 +
What other companies do you purchase your tools and supplies from?
__________________________________________________________
__________________________________________________________
Do you think your purchase represents good value?
6.
7.
8.
How long have you been a woodworker?
___0 - 2 Years
___2 - 8 Years
___8 - 20 Years
___20+ Years
16.
17.
18.
How would you rank your woodworking skills?
___Yes
Would you recommend Grizzly Industrial to a friend?
___Yes ___No
___No
___Simple
___Intermediate
___Advanced
___Master Craftsman
What stationary woodworking tools do you own? Check all that apply.
Would you allow us to use your name as a reference for Grizzly customers
___Air Compressor
___Band Saw
___Drill Press
___Drum Sander
___Dust Collector
___Horizontal Boring Machine
___Jointer
___Panel Saw
___Planer
___Power Feeder
___Radial Arm Saw
___Shaper
___Spindle Sander
___Table Saw
in your area? Note: We never use names more than three times.
___Yes
___No
19.
Comments:_______________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
__________________________________________________________
___Lathe
___Mortiser
___Vacuum Veneer Press
___Wide Belt Sander
___Other__________________________________________________
How many of your woodworking machines are Grizzly? _____________
9.
-8-
G7148 12" Slip Roll
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|