Grizzly Drill T23093 User Manual

MODEL T23093  
INDUSTRIAL  
3
8" AIR DRILL  
INSTRUCTIONS  
For questions or help with this product contact Tech Support at (570) 546-9663 or [email protected]  
Introduction  
heavy-duty industrial air drill features a paddle  
3
trigger with a thumb lock for easy control, a 8  
"
EyE/EAR INJURy hAzARD!  
Wear safety glasses and  
hearing protection during  
use of this tool!  
chuck, rear air exhaust, and rugged aluminum  
body with a padded grip. it has an 18,000 rpM  
free speed with an average 4 CFM air consump-  
tion.  
INJURy hAzARD!  
Always disconnect tool from  
air to prevent unexpected  
operation during service!  
thumb lock  
& trigger  
3
8" Chuck  
EXpLOSION hAzARD!  
Never exceed 90 pSI!  
Operation  
1. install the bit into the chuck, then tighten it in  
place with the chuck key.  
Air inlet  
1
4" npt  
Air Flow  
Valve  
2. to keep the moving parts lubricated, remove  
the air inlet protective cap and add 3–4 drops  
of tool oil into the inlet.  
figure 1. Model t23093.  
3. Wrap the threads of the quick-disconnect  
adapter with plumber's tape, then thread it  
into the air inlet.  
Inventory  
drill w/Chuck...................................................... 1  
Chuck Key ......................................................... 1  
Quick-disconnect Air inlet Adapter 4" npt...... 1  
1
4. Attach the drill to clean, regulated com-  
pressed air that is no greater than 90 psi.  
Bottle for oil ...................................................... 1  
Specifications  
5. Move the thumb lock forward, then press the  
trigger to start the drill.  
Maximum Bit diameter....................................38  
"
Maximum Free speed..................... 18,000 rpM  
Average Air Consumption......................... 4 CFM  
Air inlet size ............................................14" npt  
6. if necessary, adjust the speed of the drill by  
adjusting the air flow valve located on the  
body near the air inlet.  
Air hose size required...................................38  
"
Maximum Air pressure............................. 90 psi  
7. When finished, disconnect the drill from the  
compressed air system.  
Copyright © MArCh, 2011 By grizzly industriAl, inC.  
WARNINg: NO pORTION Of ThIS MANUAL MAy bE REpRODUCED IN ANy ShApE  
OR fORM WIThOUT ThE WRITTEN AppROvAL Of gRIzzLy INDUSTRIAL, INC.  
#ts13999 printed in ChinA  
Download from Www.Somanuals.com. All Manuals Search And Download.  

GPX Portable Stereo System J082PR User Manual
Graco Baby Playpen 1750490 User Manual
Graco Baby Playpen 1762135 User Manual
Graco Inc Pressure Washer 247549 User Manual
Graco Swing Sets 1131 1132 1141 User Manual
Havis Shields Automobile Accessories C VS 1200 EXPD 1 User Manual
HP Hewlett Packard Fax Machine HP 3100 User Manual
Husqvarna Saw FS 3800 User Manual
IBM Home Theater Server 6782 User Manual
iHome Headphones ib22 User Manual