Greenheck Fan Ventilation Hood Inline Centrifugal Grease Fan User Manual

12/4-03  
Inline Centrifugal Grease Fan Specification  
Inline grease exhaust fans shall be of the tubular centrifugal type with backward inclined wheels. Fans to  
include the UL 762 Label for grease removal and shall be built in accordance to NFPA 96 (Ventilation  
Control and Fire Protection of Commercial Cooking Operations).  
The housings shall be continuously welded heavy gauge steel with integral duct flanges to prevent grease  
and moisture leakage. Duct flange bolt holes shall be no more than 4 inches (100 mm) apart on center to  
provide a tight duct connection. Belt tubes shall be continuously welded to ensure belt remains free of  
grease and moisture. Bearing covers to be sealed with silicone gasketing rated for 400o F (200o C) and  
include a labyrinth shaft seal to protect the bearings from the airstream contaminants (felt or neoprene shaft  
seals are not acceptable). Fan housing to include two threaded and plugged drain connections that are  
located at 90o from the motor. Fans are to be universally mountable with motors in either the 3 or 9 o’clock  
position.  
Inline grease fans shall include an oversize access door to allow for duct cleaning and for removal of the  
fan wheel, shaft and bearings without lowering the fan from the duct system. Fastening bolts for the  
oversized access door shall be no more than 4 inches (100 mm) apart on center. The oversize access door  
to include silicone gasketing rated for 400o F (200o C).  
The wheel shall be of the non-overloading backward inclined centrifugal type with aluminum construction.  
Wheel shall be statically and dynamically balanced. The wheel cone and fan inlet cone shall be carefully  
matched and shall have precise running tolerances for maximum performance and operating efficiency.  
Turned precision ground and polished steel shafts shall be sized so the first critical speed is at least 25%  
over the maximum operating speed for each level of construction.  
Bearings shall be heavy-duty grease lubricated and self-aligning. Bearings shall be selected for a basic  
rating fatigue life L (10) of 80,000 hours {equivalent to L(50) average life of 400,000 hours} at the  
maximum operating speed.  
All internal and external steel components shall be painted with Permatector, an electrostatically baked  
polyester urethane coating. All coated materials shall undergo a five stage environmentally friendly wash,  
followed by a minimum 2 mil dft finish. Paint must exceed 1,000 hour salt spray under ASTM B117 test  
method.  
Inline tubular centrifugal fans shall bear the AMCA Certified Rating Seals for both sound and air  
performance.  
Fans shall be TCB as manufactured by Greenheck Fan Corporation of Schofield, Wisconsin, USA.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Hans Grohe Plumbing Product 06462XX0 User Manual
Honeywell Cooktop S8701 User Manual
Honeywell Satellite Radio STR12D User Manual
HP Hewlett Packard Landscape Lighting model 3585d User Manual
HP Hewlett Packard Server AD117 9003A ED3 User Manual
HP Hewlett Packard Stereo Equalizer 70205A User Manual
Huawei Network Router HG523a User Manual
Hunter Fan Air Cleaner Model 30550 User Manual
Hunter Fan Outdoor Ceiling Fan 26405 User Manual
Husqvarna Chainsaw 1151435 95 User Manual