Grandstream Networks Intercom System GXV 3140 User Manual

Grandstream Networks, Inc.  
Mobotix T24S Door System Configuration Guide  
GXV3140 IP Video Phone  
GXV-3140  
MOBOTIX T24S  
Download from Www.Somanuals.com. All Manuals Search And Download.  
INTRODUCTION:  
This guide has been tested for Grandstream GXV3140 IP Video Phone with firmware version 1.0.7.50 and Mobotix  
T24S Door System with MX-V4.1.1.7 (2011-12-15) Software. Be aware that different firmware revisions may have  
different web interface formats and functionalities. This guide is applicable to the following Grandstream phone models:  
GXV3140.  
This guide will cover the 3 possible ways to set up a phone for use with Mobotix T24S.  
INITIAL SETUP FOR A NEW GXV-3140/T24S SYSTEMDOOR SYSTEM:  
This section details how you can configure your GXV-3140 with the Mobotix T24S System automatically. To do so, please  
proceed as follows:  
1. Unpack the GXV-3140 and attach the handset.  
2. Connect the GXV-3140 video phone to the network and to the power. The phone will boot up, and request an IP  
address from your DHCP server. Once the phone gets an IP address it will display it as shown below:  
Figure 1: GXV3140 LCD Idle Screen  
Grandstream Networks, Inc.  
Mobotix T24S Door System Configuration Guide For GXV3140  
Page 3 of 16  
Last Update : 01/2012  
Download from Www.Somanuals.com. All Manuals Search And Download.  
   
3. Connect the GXV-3140 and T24S Door Station to the switch/router as shown below :  
Figure 2: Connecting the GXV-3140 and T24S  
4. The buttons will light up for four seconds. During this time, press the doorbell button (bottom button) until that it  
starts flashing. This starts automatic initial configuration, which will take around 5 minutes:  
The T24S lights blink as the camera starts up.  
The current T24S IP addresses and network data are announced automatically.  
Each GXV-3140 phone is contacted and configured by the camera.  
Each GXV-3140 phone restarts automatically each time the MOBOTIX configuration is updated.  
*101 is the new SIP quick-dial number for the first GXV-3140, while the T24S has the *201 SIP quick-dial number  
The phone idle screen display will change to the following :  
Grandstream Networks, Inc.  
Mobotix T24S Door System Configuration Guide For GXV3140  
Page 4 of 16  
Last Update : 01/2012  
Download from Www.Somanuals.com. All Manuals Search And Download.