Graco Marine Sanitation System 309277ZAC User Manual

Instructions -- Parts List  
Important Safety Instructions  
Read all warnings and instructions in this manual.  
Save these instructions.  
Displacement Pump  
309277ZAC  
EN  
3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure  
Model 244197, Series A  
UltraR Max and Ultimate Mxt 795 and 1095  
GMaxt 3900  
Model 244224, Series A  
Ultra Max and Ultimate Mx 1595  
GMax 5900 and 5900 Convertible  
Model 244201, Series A  
245044, 245046, 245049 Mark Vt  
GMax 5900HD  
Model 245904 Series A  
245047 Mark V International (ceramic balls)  
Model 244954, Series A, B, C  
HydraMaxt 225  
Model 244957, Series A, B, C  
HydraMax 300/350  
Model 245889, Series B  
Mark V SpackMaxt  
Model 246257, Series A  
GMax 7900, GHt 200; Models 233940 -- 233943  
Model 248971, Series A  
GH 200; Models 248559 Series A -- 248567 Series A  
EHt 200  
Model 248736, Series A  
248561 Series A, 248563 Series A  
GH 230, GH 300  
Model 277068, Series A  
LineLazert IV 200 HS  
Model 287815, Series A  
GH 230: Model 248561 Series B  
GH 300: Model 248563 Series B  
Model 287814 Series A  
GH 200: Model 248559 Series B  
Model 287946, Series A  
Mark X  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING  
EQUIPMENT MISUSE HAZARD  
Equipment misuse can cause the equipment to rupture or malfunction and result in serious injury.  
D This equipment is for professional use only.  
INSTRUCTIONS  
D Read all instruction manuals, tags, and labels before operating the equipment.  
D Use the equipment only for its intended purpose. If you are uncertain about usage, call your Graco  
distributor.  
D Do not alter or modify this equipment. Use only genuine Graco parts and accessories.  
D Do not exceed the maximum working pressure of the lowest rated system component. Refer to the  
Technical Data on page 16 for the maximum working pressure of this equipment.  
D Use fluids and solvents compatible with the equipment wetted parts. Refer to the Technical Data  
section of all equipment manuals. Read the fluid and solvent manufacturer’s warnings.  
D Do not use 1,1,1--trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or  
fluids containing such solvents in pressurized aluminum equipment. Such use could result in a  
chemical reaction, with the possibility of explosion.  
D Comply with all applicable local, state, and national fire, electrical, and safety regulations.  
MOVING PARTS HAZARD  
Moving parts can pinch or amputate your fingers.  
D Keep clear of all moving parts when starting or operating the pump.  
D Before servicing the equipment, follow the Pressure Relief Procedure on page 4 to prevent the  
equipment from starting unexpectedly.  
SKIN INJECTION HAZARD  
High--pressure fluid from dispense valve, hose leaks, or ruptured components will pierce skin. This  
may look like just a cut, but it is a serious injury that can result in amputation. Get immediate surgi-  
cal treatment.  
D Do not point dispense valve at anyone or at any part of the body.  
D Do not put your hand over the end of the dispense nozzle.  
D Do not stop or deflect leaks with your hand, body, glove, or rag.  
Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning, check-  
ing, or servicing equipment.  
309277  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Pressure Relief Procedure  
Tools Needed  
Vise  
WARNING  
12 in. adjustable, open end wrench (2)  
Hammer, 20 oz maximum  
Small screwdriver  
Throat Seal Liquid  
Pick or long small screwdriver  
PRESSURIZED EQUIPMENT HAZARD  
The system pressure must be manually  
relieved to prevent the system from  
starting or spraying accidentally. To  
reduce the risk of an injury from accidental spray  
from the gun, splashing fluid, or moving parts,  
follow the Pressure Relief Procedure whenever  
you:  
Cleaning and Inspecting Parts  
1. Clean and inspect parts. Pay particular attention to  
the ball seats in the intake valve and piston, which  
must have no nicks or wear, and to the inside of  
the sleeve and the outside of the piston rod, which  
must not be worn or scratched. Replace worn or  
damaged parts.  
D are instructed to relieve the pressure,  
D stop spraying,  
D check or service any of the system equipment,  
D or install or clean the spray nozzle.  
1. Engage gun safety latch.  
2. Turn ON/OFF switch to OFF.  
3. Unplug power cord.  
WARNING  
COMPONENT RUPTURE HAZARD  
Never use sharp or pointed tools to  
remove sleeve or other components  
4. Disengage gun safety latch. Hold metal part of gun  
against grounded metal pail and trigger gun into  
pail to relieve pressure.  
which could result in pump rupture and  
cause serious bodily injury. If the sleeve cannot be  
removed easily, return the sleeve and cylinder to  
your Graco distributor for removal.  
5. Engage gun safety latch.  
6. Open any fluid drain valves in system. Leave drain  
valve open until ready to dispense again.  
Pump Repair Kits  
2. Remove and clean the sleeve when you are  
repacking the pump.  
Pump  
Repair Kit  
248212  
248213  
248213  
246341  
244958  
245819  
244200  
246341  
246341  
246341  
246341  
287813  
287813  
287945  
244197  
244224  
244201  
244954  
244957  
245889  
245904  
246257  
248736  
248971  
277068  
287814  
287815  
287946  
4
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Repair When Pump Is Off The Sprayer  
245889, 287946 only  
Disassembling the pump  
215  
Fig. 1. Remove packing nut (202) and throat adjust-  
ment spacer (228).  
236  
202  
228  
227  
227  
(o-ring on  
bottom  
(o-ring on top  
244957 only)  
all except  
244957)  
ti2332a  
Fig. 1  
7570e  
Fig. 3  
Fig. 4. Tap piston rod out of cylinder with a hammer or  
flip over and tap piston rod out against a bench.  
Fig. 2. Unscrew intake valve from cylinder.  
Note: Sleeve may come out  
of cylinder with piston rod.  
7571a  
Fig. 4  
Fig. 5. Remove piston rod from sleeve, or remove  
sleeve from cylinder.  
7569A  
Fig. 2  
Fig. 3. Disassemble intake valve. Clean and inspect.  
O-ring (227) may require a pick for removal.  
7572A  
Fig. 5  
309277  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
WARNING  
COMPONENT RUPTURE HAZARD  
Do not clean or wipe the piston valve  
threads. Cleaning the piston valve  
Not  
used on  
244197  
threads could destroy the special sealing  
patch and cause the piston valve to come loose  
during operation, causing pump bursting and  
possible serious bodily injury.  
Fig. 6. Unscrew piston valve from piston rod. Clean  
and inspect parts. The piston has a special thread  
locking/sealing patch. Do not remove the patch. The  
patch allows four disassembly/assembly procedures  
before it is necessary to apply Loctiter to the threads.  
7573B  
Fig. 8  
Assembling the pump  
Fig. 9. Soak all leather packings in SAE 30W oil for 1  
hour minimum prior to assembly. Stack male gland  
(204) on piston rod. Alternately stack UHMWPE (208)  
and leather (218) packings (note orientation) on piston  
rod. Install female gland (217). Install piston guide  
(216) (note orientation) on piston valve (210). The spe-  
cial sealing patch on piston valve threads is good for  
four repackings. Use Loctiter on piston valve threads  
after four repackings.  
used on  
245889,  
287946,  
287814,  
287815  
210  
Not  
used on  
244197  
7576A  
Fig. 6  
216  
Fig. 7. Remove packings and glands from piston rod.  
used on  
245889,  
287946,  
287814,  
287815  
Not  
used on  
244197  
217  
1
1
218 204 208  
1
244954, 246257, 245889; 208 and 218 are 203  
and 223, respectively. 287946; 208 and 218 are  
7574c  
203 and 209, respectively.  
Fig. 9  
ti3940a  
Fig. 7  
Note: Pump 287814 & 287815 do not use leather  
packings in piston stack. Alternately stack blue  
(208) and brown (218) packings on these pumps.  
Fig. 8. Remove throat packings and glands from cylin-  
der. Discard throat packings and glands.  
6
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 10. Install ball (206) in piston rod. If Loctiter is ap-  
plied to piston valve threads, ensure that none gets on  
ball.  
Fig. 12. Soak all leather packings in SAE 30W oil for 1  
hour minimum prior to assembly. Place male gland  
(204) in cylinder. Alternately stack UHMWPE (203) and  
leather packings (223) (note orientation). Place female  
gland (224) in top of cylinder. Seat packings.  
206  
Not  
used on  
244197  
224  
203  
223  
204  
7575A  
Fig. 10  
Fig. 11. Tighten piston valve to piston rod as specified:  
7573B  
Fig. 12  
Torque to 27 +/--3 ft-lb  
(244197)  
Fig. 13. Install seal (201) into packing nut (202). Install  
throat adjustment spacer (228) onto packing nut.  
Loosely install packing nut into cylinder.  
Torque to 55 +/--3 ft-lb  
(244224, 244201,  
287814, 287815)  
201  
Torque to 190 +/-- 10 ft--lb  
(244957)  
202  
228  
Torque to 120 +/-- 6 ft-lb  
(244954, 246257, 245889,  
287946, 277068, 248736,  
248971)  
ti2333a  
7576A  
Fig. 11  
Fig. 13  
309277  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 14. Grease piston packings and sleeve top edge.  
Fig. 16. Grease top inch or two of piston rod that will  
go through the cylinder throat packings.  
7579A  
Fig. 16  
Fig. 17. Grease o-ring (221) and place on sleeve. Slide  
sleeve/piston rod assembly into bottom of cylinder. Re-  
place o-ring (207) if desired.  
Note: O-ring (207) is not required for safe pump opera-  
tion.  
7578A  
Fig. 14  
Fig. 15. Carefully slide piston assembly into top of  
sleeve.  
207  
221  
7577A  
Fig. 15  
7582A  
Fig. 17  
8
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 18. Reassemble intake valve with new o-ring  
(227), seat (212) and ball (214). Seat may be flipped  
over and used on other side. Clean seat thoroughly.  
Snap intake spring (236) into place inside ball guide  
(215).  
Spring (236), for model 287946, is optional and not  
included with the pump.  
245889, 287946 only  
215  
236  
7569A  
Fig. 19  
Fig. 20. Torque seal and packing nut (202) down onto  
throat adjustment spacer (228) to 100 +/--10 in-lb (75  
+/--5 in-lb for 246257) (140+/--10 in--lb for 287814,  
287815).  
215  
214  
215  
214  
Remove throat adjustment spacer (228) when pump  
packings begin to leak after much use. Then tighten  
packing nut down until leakage stops or lessens. This  
allows approximately 100 gallons of additional opera-  
tion before a repacking is required.  
(o-ring  
on top  
244957  
only)  
212  
227  
(o-ring on  
bottom  
all except  
244957)  
227  
212  
227  
227  
202  
228  
7570c  
Fig. 18  
Fig. 19. Install intake valve on cylinder. If a wrench is  
used torque as follows:  
67 +/--5 ft-lb (model 244197)  
80 +/--5 ft--lb (models 244201, 244224, 245904)  
200 +/--10 ft--lb (models 244954, 246257, 245889,  
287946, 277068, 248736, 248971)  
200 +/--15 ft--lb (model 244957, 287814, 287815)  
If a wrench is not used, be sure intake valve is bot-  
tomed out against cylinder.  
ti2332a  
Fig. 20  
309277  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Repair When Pump Is On The Sprayer  
Fig. 2. Use screwdriver to push retaining spring up and  
push pin out.  
WARNING  
SKIN INJECTION HAZARD  
To reduce the risk of serious injury,  
whenever you are instructed to relieve  
pressure, follow the Pressure Relief  
Procedure on page 4.  
Fig. 1. Remove intake valve.  
7674A  
Fig. 2  
Fig. 3. Disassemble intake valve. Clean and inspect.  
O-ring (227) may require a pick for removal.  
227  
227  
(o-ring on  
bottom  
all except  
244957)  
(o-ring on top  
244957  
only)  
7570A  
Fig. 3  
7673A  
Fig. 1  
10  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 4. Remove piston rod and sleeve.  
Fig. 7. Invert piston rod and insert into cylinder to force  
out throat packings.  
7746A  
Fig. 4  
Fig. 4. Invert piston rod and sleeve and pound on hard  
surface until piston rod comes out of sleeve.  
7747A  
Fig. 7  
Fig. 8. Insert piston rod into cylinder with pin hole up  
and piston valve down. Insert pin into piston rod and  
crank shaft.  
7572A  
Fig. 5  
Fig. 6. Remove packing nut (202)  
202  
7675A  
Fig. 8  
7726A  
Fig. 6  
309277  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 9. Remove piston valve from piston rod with a  
wrench.  
Fig. 11. Soak all leather packings in SAE 30W oil for 1  
hour minimum prior to assembly. Stack male gland  
(204). Alternately stack UHMWPE (203) and leather  
(223) packings (note orientation). Install female gland  
(224). Install seal (201) and packing nut (202) and  
throat adjustment spacer (228).  
Not  
224  
used on  
244197  
201  
223  
203  
228  
202  
204  
7748A  
Fig. 9  
7573B  
7581A  
Fig. 11  
Fig. 10. Remove pin and piston rod from cylinder.  
Fig. 12. Remove packings and glands from piston rod.  
used on  
245889,  
287946,  
287814,  
287815  
Not  
used on  
244197  
7675A  
Fig. 10  
ti3939a  
Fig. 12  
12  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 13. Soak all leather packings in SAE 30W oil for 1  
Fig. 15. Grease piston packings and sleeve top edge.  
hour minimum prior to assembly. Stack male gland  
(219) on piston rod. Alternately stack UHMWPE (208)  
and leather (218) packings (note orientation) on piston  
rod. Install female gland (217). Install piston guide  
(216) (note orientation) on piston valve (210). The spe-  
cial sealing patch on piston valve threads is good for  
four repackings. Use Loctiter on piston valve threads  
after four repackings.  
used on  
219  
245889,  
287946,  
287814,  
287815  
217  
Not  
used on  
244197  
216  
7578A  
Fig. 15  
210  
1
1
218  
208  
ti3941a  
Fig. 16. Carefully slide piston assembly into top of  
sleeve. Assure u-cup is not rolled over or damaged.  
244954, 246257, 245889; 208 and 218 are 203 and  
223, respectively. 287946; 208 and 218 are 203  
and 209, respectively.  
1
Fig. 13  
Note: Pump 287814 & 287815 do not use leather  
packings in piston stack. Alternately stack blue  
(208) and brown (218) packings on these pumps.  
Fig. 10. Install ball (206) in piston rod. If Loctiter is ap-  
plied to piston valve threads, ensure that none gets on  
ball. Install piston valve on piston rod.  
Torque as follows:  
27 +/--3 ft-lb (for model 244197)  
55 +/--3 ft-lb (for models 244224, 244201, 245904,  
287814, 287815)  
7577A  
Fig. 16  
120 +/-- 6 ft-lb (for models 244954, 246257, 245889,  
287946, 277068, 248736, 248971)  
190 +/--10 ft--lb (for model 244957)  
Fig. 17. Grease top inch or two of piston rod that will  
go through the cylinder throat packings.  
206  
7575A  
7579A  
Fig. 14  
Fig. 17  
309277  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 18. Grease o-ring (221) and place on sleeve. Slide  
Fig. 20. Use screwdriver to push retaining spring up.  
sleeve/piston rod assembly into bottom of cylinder. Re-  
place o-ring (207) if desired.  
Note: O-ring (207) is not required for safe pump opera-  
tion.  
7674B  
207  
Note: Make sure retaining ring falls into slot.  
Fig. 20  
221  
7750A  
Fig. 18  
Fig. 20. Torque seal and packing nut (202) down onto  
throat adjustment spacer (228) to 100 +/--10 in-lb (75  
+/--5 in-lb for 246257) (140 +/--10 in-lb for 287814,  
287815).  
Fig. 21. Push in pin.  
Remove throat adjustment spacer (228) when pump  
packings begin to leak after much use. Then tighten  
packing nut down until leakage stops or lessens. This  
allows approximately 100 gallons of additional opera-  
tion before a repacking is required.  
202  
7675A  
Fig. 21  
7726A  
Fig. 19  
14  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Fig. 22. Reassemble intake valve with new o-ring  
Fig. 23. Install intake valve on cylinder. Torque:  
67 +/--5 ft-lb (model 244197)  
(227), seat (212) and ball (214). Seat may be flipped  
over and used on other side. Clean seat thoroughly.  
80 +/--5 ft-lb (model 244224, 244201, 245904)  
200+/--10 ft-lb (model 244954, 246257, 245889,  
287946, 244957, 248971, 248736, 277068, 287814,  
287815)  
Spring (236), for model 287946, is optional and not  
included with the pump.  
245889, 287946 only  
215  
236  
7678A  
227  
Fig. 23  
227  
(o-ring on  
bottom  
(o-ring on top  
244957 only)  
all except  
244957)  
7570d  
Fig. 22  
309277  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Service  
Cross Sectional Reference  
222  
201  
V-Maxt UHWMPE,  
brown on  
287814 & 287815  
202  
228  
Pump 245889  
224  
223  
203  
204  
V-Maxt UHWMPE, blue  
Leather  
205  
221  
220  
Pump 244197  
206  
208  
207  
219  
218  
See Parts  
112589, 189587  
2
3
Leather  
Pump 245889, 287946  
217  
216  
V-Maxt UHWMPE, blue  
210  
221  
215  
214  
213  
7683C  
212  
227  
1
2
3
(227 on top of 212 244957)  
1
See Parts  
(203 on 244954, 246257, 245889, 287946)  
15D158, 118600  
Spring (236), for model 287946, optional ,  
not included with the pump  
(223 on 244954, 246257, 245889)  
(209 on 287946)  
Fig 24  
Technical Data  
Maximum working pressure  
Fluid outlet size  
All except 244957 . . . . . . . . . . . . . . . . . 3600 psi (250 bar, 24.8 MPa)  
244957 . . . . . . . . . . . . . . . . . . . . . . . . . . 4000 psi (276 bar, 27.6 MPa)  
Fluid inlet size  
244197 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4 npt(f)244224, 244201,  
244954, 246257, 245904, 248971  
248736, 287814, 287815 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/8 npt(f)  
244957, 245889, 287946 (manifold) . . . . . . . . . . . . . . . . . . . 1/2 npt(f)  
Wetted parts . . . . . . . . . . . . . . . . . . . . . . . . . . . stainless steel, PTFE,  
leather, nylon, zinc-plated carbon steel, tungsten carbide, chrome  
plating, acetal, polyethylene  
244224, 244197, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3/4 npt(m)  
244201, 244954, 246257, 245889, 287946, 245904,  
248736, 248971, 287814, 287815 . . . . . . . . . . . . . . . . . . . 1 npsm(m)  
244957 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/4 npt(m)  
NOTE: LoctiteR is a registered trademark of the Loctite Company.  
16  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 244197  
Model 244197, Series A  
Ref  
No.  
201  
Part No. Description  
Qty.  
201  
202  
203* 192692  
179810  
193046  
SEAL, throat  
NUT, packing  
1
1
3
202  
228  
221*  
222  
V-PACKING, throat,  
V-Maxt UHMWPE, blue  
GLAND, male, throat  
CYLINDER, pump  
BALL, sst, 0.3125 in.  
PACKING, o-ring  
V-PACKING, piston  
V-Maxt UHMWPE, blue  
VALVE, piston  
KIT, seat, carbide  
includes 214 and 227  
VALVE, intake (foot)  
BALL, sst, 0.5000 in.  
GUIDE, ball  
204* 178942  
205  
206* 105444  
207* 156593  
208* 192693  
1
243346  
224*  
1
1
3
*223  
219*  
218*  
210  
212† 239922  
239932  
1
1
203*  
204*  
213  
214*† 105445  
215 192624  
216* 196758  
217* 178969  
218* 178939  
219* 196880  
220  
221* 108526  
222 248206  
223* 178940  
224* 178943  
195892  
*208  
1
1
1
1
2
1
1
2
1
2
1
1
1
Guide, piston  
217*  
216*  
206*  
GLAND, female, piston  
V-PACKING, leather, piston  
GLAND, male  
SLEEVE, cylinder  
O-RING, PTFE  
ROD, piston  
V--PACKING, leather, throat  
GLAND, female  
ADAPTER, nipple,  
PACKING, o-ring  
240521  
225  
205  
210  
215  
225  
227*† 107079  
228 158776  
196176  
†*214  
†*227  
SPACER, throat adjustment o--ring 1  
*
These parts are also included in Repair Kit 248212,  
which may be purchased separately.  
212†  
213  
207*  
221*  
These parts are also included in Carbide Seat Kit  
239922, which may be purchased separately.  
220  
TI0716c  
309277  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pumps 244224, 244201, 245904  
Models 244224, Series A; 244201, Series A; 245904, Series A  
Ref  
No.  
Part No.  
Description  
Qty.  
201  
202  
201  
202  
203*  
183171  
193032  
193124  
PLUG  
NUT, packing  
V-PACKING  
1
1
4
221*  
222‡  
V-Maxt UHMWPE, blue  
GLAND, packing, male, throat  
CYLINDER, pump  
Pump 244201, 245904  
Pump 244224  
BALL, sst, 0.375 in.  
Pump 244224, 244201  
BALL, ceramic, 0.375 in.  
Pump 245904  
204*  
205  
183176  
1
228  
196754  
243347  
101947  
1
1
1
224*  
206*  
*203  
116327  
1
219*  
207*  
208*  
156633  
193125  
PACKING, o-ring  
1
4
223*  
204*  
V-PACKING, piston  
V-Maxt UHMWPE, blue  
VALVE, piston  
SEAT, carbide (196866)  
Pump 244224, 244201  
includes 214 and 227  
SEAT, carbide (197470)  
Pump 245904  
includes 214 and 227  
HOUSING, intake (foot)  
Pump 244201, 245904  
Pump 244224  
BALL, sst, 0.875 in.  
Pump 244224, 244201  
BALL, ceramic, 0.75 in.  
Pump 244409, 245904  
GUIDE, ball  
Pump 244224  
Pump 244201, 245904  
GUIDE, piston  
GLAND, female, piston  
V-PACKING, leather, piston  
GLAND, packing, male  
SLEEVE, cylinder  
210  
240150  
1
1
212† 244199  
*218  
208*  
244571  
1
217*  
216*  
206*  
213  
196753  
195894  
1
1
1
214*† 102972  
225  
205  
111453  
1
210  
215  
215  
193027  
196967  
1
1
1
1
3
1
1
2
216*  
217*  
218*  
219*  
220  
221*  
222  
196757  
183185  
183174  
183178  
240525  
107098  
†*214  
†*227  
212†  
213  
207*  
221*  
PACKING, o--ring  
ROD, piston  
Pump 245904  
Pump 244224  
241285  
288479  
241285  
183175  
183177  
162485  
1
1
1
3
1
1
1
1
Pump 244201  
223*  
224*  
225  
227*† 108526  
228 C20987  
V-PACKING, leather, throat  
GLAND, packing, female  
NIPPLE, adapter, 3/8 npt x 3/8 npsm  
PACKING, o-ring  
220  
SPACER, throat adjustment o--ring  
*
These parts are also included in Repair Kit 248213 (pump  
244224, 244201) or Repair Kit 244200 (pump 245904),  
which may be purchased separately.  
These parts are also included in Carbide Seat Kit 244199  
(pump 244224, 244201) or Carbide Seat Kit 244571  
(pump 245904), which may be purchased separately.  
TI0717d  
18  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 244954  
Model 244954, Series A  
Ref  
No.  
Part No. Description  
Qty.  
225  
205  
201  
202  
203* 198701  
112590  
189589  
PLUG  
NUT, packing  
V-PACKING  
V-Maxt UHMWPE, blue  
1
1
8
201  
202  
204* 15G658 GLAND, packing, male  
205  
206* 107203  
207* 160325  
210  
1
1
1
1
1
1
244974  
CYLINDER, pump  
BALL, sst, 0.5625 in.  
PACKING, o-ring  
VALVE, piston  
SEAT, carbide  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, sst, 1.000 in.  
GUIDE, ball  
GUIDE, piston, plastic  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
PACKING, o-ring  
228  
224*  
240580  
207*  
221*  
203*  
212† 240918  
213  
214*† 107167  
215 198505  
216* 198303  
217* 198765  
219  
220  
221* 108822  
222 287141  
223* 198718  
224* 15G657 GLAND, packing, female  
225  
227*† 107098  
228  
236  
198121  
1
1
1
1
1
1
1
2
1
6
1
1
1
223*  
204*  
189585  
244975  
220  
ROD, piston  
V-PACKING, leather  
221*  
116756  
NIPPLE, elbow, 45_  
PACKING, o-ring  
SPACER, throat adjustment o-ring 1  
SPRING, intake  
236  
215  
222‡  
157195  
233698  
1
*
These parts are also included in Repair Kit 246341,  
which may be purchased separately.  
†*214  
†*227  
212†  
213  
219*  
These parts are also included in Carbide Seat Kit  
240918, which may be purchased separately.  
203*  
223*  
217*  
216*  
206*  
210  
TI1308dc  
309277  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 244957  
Model 244957, Series A  
201  
202  
Ref  
No.  
Part No. Description  
Qty.  
201  
202  
203* 197468  
196362  
196361  
PLUG  
NUT, packing  
1
1
4
228  
225  
205  
V-PACKING (Throat)  
V-Maxt UHMWPE, blue  
GLAND, packing, male  
CYLINDER, pump  
BALL, sst, 0.625 in.  
PACKING, o-ring  
V-PACKING (Piston)  
V-Maxt UHMWPE, blue  
VALVE, piston  
204 * 197372  
205  
206* 101822  
207* 160258  
208* 197469  
2
1
1
1
4
224*  
244977  
*203  
223*  
204*  
210  
212† 244960  
244454  
1
1
207*  
SEAT, carbide  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, sst, 1.25 in.  
GUIDE, ball  
213  
214*† 102973  
215 196363  
216* 196928  
217* 197354  
218* 184305  
219* 196925  
196357  
1
1
1
1
1
3
1
1
2
1
3
1
1
1
221*  
GUIDE, piston  
GLAND, female, piston  
V-PACKING, leather, piston  
GLAND, packing, male  
SLEEVE, cylinder  
PACKING, o--ring  
ROD, piston  
V-PACKING, leather, throat  
GLAND, packing, female  
NIPPLE, elbow, 45_  
PACKING, o-ring  
220  
220  
221* 106259  
222 287558  
287557  
222‡  
223* 184304  
224* 197368  
221*  
215  
225  
227*† 104537  
228 160721  
116755  
219*  
218*  
SPACER, throat adjustment o--ring 1  
*208  
*
These parts are also included in Repair Kit 244958,  
which may be purchased separately.  
†*214  
†*227  
These parts are also included in Carbide Seat Kit  
244960, which may be purchased separately.  
212†  
213  
217*  
*216  
206*  
210  
TI1317b  
20  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 245889  
Model 245889, Series B  
Ref  
No.  
Part No. Description  
Qty.  
201  
202  
203* 198701  
112590  
189589  
PLUG  
NUT, packing  
V-PACKING  
1
1
8
220  
V-Maxt UHMWPE, blue  
204* 15G658 GLAND, male, throat  
1
1
1
1
1
1
205  
206  
207* 160325  
210 240580  
212† 245885  
245888  
118601  
CYLINDER, pump  
BALL, ceramic, 0.5625 in.  
PACKING, o-ring  
201  
202  
228  
224*  
221*  
VALVE, piston  
SEAT, carbide  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, ceramic, 0.875 in.  
GUIDE, ball  
222  
213  
214† 118602  
215 15D158  
216* 112589  
217* 198765  
15A303  
1
1
1
1
1
1
1
2
1
6
1
1
203*  
SEAL, U-cup  
219*  
223*  
204*  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
PACKING, o-ring  
ROD, piston  
219  
220  
189585  
240921  
221* 108822  
222 245886  
223* 198718  
*223  
203*  
217*  
V-PACKING, leather, piston  
224* 15G657 GLAND, packing, female  
227*† 107098 PACKING, o-ring  
228  
236  
237  
157195  
118600  
189587  
SPACER, throat adjustment o-ring 1  
SPRING, compression  
1
1
1
*216  
WASHER, back-up  
206  
210  
237  
*
These parts are also included in Repair Kit 245819,  
which may be purchased separately.  
These parts are also included in Carbide Seat Kit  
245885, which may be purchased separately.  
215  
236  
205  
†214  
212†  
213  
207*  
221*  
†*227  
ti2086c  
309277  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 287946  
Model 287946, Series A  
Ref  
No.  
Part No. Description  
Qty.  
201  
202  
203* 193722  
112590  
189589  
PLUG  
NUT, packing  
V-PACKING  
1
1
8
V-Maxt UHMWPE, blue  
204* 15G658 GLAND, male, throat  
220  
1
1
1
1
3
1
1
205  
206  
207* 160325  
209* 112591  
210  
212† 245885  
15G437 CYLINDER, pump  
118601 BALL, ceramic, 0.5625 in.  
201  
202  
228  
224*  
221*  
222  
PACKING, o-ring  
PACKING, vee, leather  
VALVE, piston  
SEAT, carbide  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, ceramic, 0.875 in.  
GUIDE, ball  
249177  
213  
214† 118602  
215 15D158  
216* 119636  
217* 189588  
219  
220  
221* 108822  
222 288103  
223* 112591  
15A303  
1
1
1
1
1
1
1
2
1
3
1
1
*203  
219*  
223*  
204*  
SEAL, U-cup  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
PACKING, o-ring  
ROD, piston  
189585  
248979  
*209  
203*  
V-PACKING, leather, piston  
224* 15G657 GLAND, packing, female  
227*† 107098 PACKING, o-ring  
217*  
228  
236  
157195  
118600  
SPACER, throat adjustment o-ring 1  
SPRING, compression  
optional, not included with the pump  
WASHER, back-up 1  
1
*216  
1
206  
210  
237  
237  
15F183  
*
These parts are also included in Repair Kit 287945,  
which may be purchased separately.  
215  
236  
These parts are also included in Carbide Seat Kit  
245885, which may be purchased separately.  
205  
It is recommended that the check valve be repaired  
at the same time as the pump. See manual 313773  
and Kit 258650.  
†214  
212†  
213  
207*  
221*  
†*227  
ti2086c  
22  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 246257  
Model 246257, Series A  
221*  
Ref  
No.  
Part No. Description  
Qty.  
201  
202  
203* 198701  
112590  
189589  
PLUG  
NUT, packing  
V-PACKING  
V-Maxt UHMWPE, blue  
1
1
8
222  
201  
204* 15G658 GLAND, male, throat  
1
1
1
1
1
1
219*  
205  
206* 107203  
207* 160325  
245413  
CYLINDER, pump  
BALL, sst, 0.5625 in.  
PACKING, o-ring  
202  
228  
210  
212† 240918  
240580  
VALVE, piston  
SEAT, carbide  
224*  
*223  
*216  
203*  
217*  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, sst, 1.000 in.  
GUIDE, ball  
GUIDE, piston, plastic  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
*203  
213  
214*† 107167  
215 193391  
216* 198303  
217* 198765  
198219  
1
1
1
1
1
1
1
2
1
6
1
1
1
223*  
204*  
206*  
219  
220  
189585  
240921  
210  
236  
221* 108822  
222 249000  
223* 198718  
PACKING, o-ring  
ROD, piston  
V-PACKING, leather, piston  
224* 15G657 GLAND, packing, female  
227*† 107098 PACKING, o-ring  
215  
228  
236  
157195  
233698  
SPACER, throat adjustment o-ring 1  
SPRING, intake  
1
†*214  
†*227  
*
These parts are also included in Repair Kit 246341,  
which may be purchased separately.  
212†  
213  
205  
These parts are also included in Carbide Seat Kit  
240918, which may be purchased separately.  
207*  
221*  
220  
ti2331a  
309277  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 287815  
Model 287815, Series A  
221*  
Ref  
No.  
201* 112590  
202 189589  
203* 198701  
Part No. Description  
Qty.  
PLUG  
NUT, packing  
V-PACKING  
1
1
8
222  
201  
202  
V-Maxt UHMWPE, blue  
204* 15G658 GLAND, male, throat  
219*  
1
1
1
1
1
1
205  
206* 107203  
207* 160325  
210  
212† 240918  
249532  
KIT, CYLINDER, pump  
BALL, sst, 0.5625 in.  
PACKING, o-ring  
VALVE, piston  
SEAT, carbide  
228  
249177  
238  
224*  
203*  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, sst, 1.000 in.  
GUIDE, ball  
*203  
213  
214*† 107167  
215 198505  
216* 119636  
217* 189588  
219* 189585  
198219  
1
1
1
1
1
1
1
2
1
3
1
1
217*  
223*  
204*  
1
*216  
237  
WIPER, piston  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
PACKING, o-ring  
ROD, piston  
206*  
210  
220  
221* 108822  
222 287816  
223* 198718  
287817  
236  
215  
V-PACKING, leather, piston  
224* 15G657 GLAND, packing, female  
227*† 107098  
228* 157195  
PACKING, o-ring  
SPACER, throat adjustment o-ring 1  
236  
237* 15F183  
238* 15F875  
233698  
SPRING, intake  
WASHER, backup  
V--PACKING, piston V-Maxt  
UHMWPE, brown  
1
1
†*214  
†*227  
212†  
213  
205  
3
*
These parts are also included in Repair Kit 287813,  
which may be purchased separately.  
207*  
221*  
These parts are also included in Carbide Seat Kit  
240918, which may be purchased separately.  
ti2331c  
220  
24  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 287814  
221*  
Model 287814 Series A  
Ref  
No.  
222  
Part No. Description  
Qty.  
201* 112590  
202 189589  
203* 198701  
PLUG  
NUT, packing  
V-PACKING  
1
1
8
201  
202  
219*  
V-Maxt UHMWPE, blue  
204* 15G658 GLAND, male, throat  
1
1
1
1
1
1
228  
205  
206* 107203  
207* 160325  
210  
212† 240918  
245413  
CYLINDER, pump  
BALL, sst, 0.5625 in.  
PACKING, o-ring  
VALVE, piston  
SEAT, carbide  
238  
224*  
203*  
*203  
249177  
217*  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, sst, 1.000 in.  
GUIDE, ball  
223*  
204*  
1
*216  
237  
213  
214*† 107167  
215 198505  
216* 119636  
217* 189588  
219* 189585  
198219  
1
1
1
1
1
1
1
2
1
3
1
1
206*  
210  
WIPER, piston  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
PACKING, o-ring  
ROD, piston  
V-PACKING, leather, piston  
236  
215  
220  
221* 108822  
222 249119  
223* 198718  
249121  
224* 15G657 GLAND, packing, female  
†*214  
†*227  
227*† 107098  
228* 157195  
PACKING, o-ring  
SPACER, throat adjustment o-ring 1  
SPRING, intake  
WASHER, backup  
V--PACKING, piston V-Maxt  
UHMWPE, brown  
212†  
213  
205  
236  
233698  
1
1
237* 15F183  
238* 15F875  
3
207*  
221*  
*
These parts are also included in Repair Kit 287813,  
which may be purchased separately.  
These parts are also included in Carbide Seat Kit  
240918, which may be purchased separately.  
ti2331c  
220  
309277  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 248736  
Model 248736, Series A  
221*  
Ref  
No.  
Part No. Description  
Qty.  
201  
202  
203* 198701  
112590  
189589  
PLUG  
NUT, packing  
V-PACKING  
V-Maxt UHMWPE, blue  
1
1
8
222  
201  
204* 15G658 GLAND, male, throat  
1
1
1
1
1
1
219*  
205  
206* 107203  
207* 160325  
249532  
KIT, CYLINDER, pump  
BALL, sst, 0.5625 in.  
PACKING, o-ring  
202  
228  
224*  
210  
212† 240918  
240580  
VALVE, piston  
SEAT, carbide  
*223  
*216  
203*  
217*  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, sst, 1.000 in.  
GUIDE, ball  
GUIDE, piston, plastic  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
*203  
213  
214*† 107167  
215 193391  
216* 198303  
217* 198765  
198219  
1
1
1
1
1
1
1
2
1
6
1
1
223*  
204*  
1
206*  
219  
220  
189585  
248980  
210  
236  
221* 108822  
222 249001  
223* 198718  
PACKING, o-ring  
ROD, piston  
V-PACKING, leather, piston  
224* 15G657 GLAND, packing, female  
227*† 107098 PACKING, o-ring  
215  
228  
236  
157195  
233698  
SPACER, throat adjustment o-ring 1  
SPRING, intake  
1
†*214  
†*227  
212†  
213  
*
These parts are also included in Repair Kit 246341,  
which may be purchased separately.  
205  
These parts are also included in Carbide Seat Kit  
240918, which may be purchased separately.  
207*  
221*  
220  
ti2331a  
26  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts -- Pump 248971, 277068  
Model 248971, Series A; 277068, Series A  
221*  
Ref  
No.  
Part No. Description  
Qty.  
201  
202  
203* 198701  
112590  
189589  
PLUG  
NUT, packing  
V-PACKING  
1
1
8
222  
201  
V-Maxt UHMWPE, blue  
204* 15G658 GLAND, male, throat  
1
1
1
1
1
1
219*  
205  
206* 107203  
207* 160325  
245413  
CYLINDER, pump  
BALL, sst, 0.5625 in.  
PACKING, o-ring  
202  
228  
224*  
210  
212† 240918  
240580  
VALVE, piston  
SEAT, carbide  
*223  
*216  
203*  
217*  
includes 214 and 227  
HOUSING, intake (foot)  
BALL, sst, 1.000 in.  
GUIDE, ball  
GUIDE, piston, plastic  
GLAND, female, piston, steel  
GLAND, packing, male, steel  
SLEEVE, cylinder  
PUMP, 248971  
*203  
213  
214*† 107167  
215 193391  
216* 198303  
217* 198765  
198219  
1
1
1
1
1
1
223*  
204*  
1
206*  
219  
220  
189585  
210  
236  
248979  
240921  
1
1
2
1
6
1
1
PUMP, 277068  
221* 108822  
222 249000  
223* 198718  
PACKING, o-ring  
ROD, piston  
V-PACKING, leather, piston  
215  
224* 15G657 GLAND, female  
227*† 107098 PACKING, o-ring  
†*214  
†*227  
228  
236  
157195  
233698  
SPACER, throat adjustment o-ring 1  
SPRING, intake  
212†  
213  
1
205  
*
These parts are also included in Repair Kit 246341  
which may be purchased separately.  
These parts are also included in Carbide Seat Kit  
240918, which may be purchased separately.  
207*  
221*  
220  
ti2331a  
309277  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Graco Standard Warranty  
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from  
defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended,  
or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the  
equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained  
in accordance with Graco’s written recommendations.  
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by  
faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or sub-  
stitution of non--Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of  
Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture,  
installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco.  
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for  
verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The  
equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does notdisclose anydefect  
in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and  
transportation.  
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT  
NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other  
remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any  
other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the  
date of sale.  
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR  
A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD  
BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches,  
hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in mak-  
ing any claim for breach of these warranties.  
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment  
hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract,  
breach of warranty, the negligence of Graco, or otherwise.  
FOR GRACO CANADA CUSTOMERS  
The parties acknowledge that they have required that the present document, as well as all documents, notices and legal proceedings  
entered into, given or instituted pursuant hereto or relating directly or indirectly hereto, be drawn up in English. Les parties reconnais-  
sent avoir convenu que la rédaction du présente document sera en Anglais, ainsi que tous documents, avis et procédures judiciaires  
exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procedures concernées.  
ADDITIONAL WARRANTY COVERAGE  
Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty  
Program”.  
TO PLACE AN ORDER, contact your Graco distributor, or call this number to identify the distributor closest to you:  
1--800--690--2894 Toll Free  
All written and visual data contained in this document reflect the latest product information available at the time of publication.  
Graco reserves the right to make changes at any time without notice.  
Original Instructions. This manual contains English; MM 309277  
Graco Headquarters: Minneapolis  
International Offices: Belgium, China, Japan, Korea  
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440--1441  
Copyright 2000, Graco Inc. is registered to ISO 9001  
Rev. 08/2011  
28  
309277  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grandstream Networks IP Phone GXP1200 User Manual
Grizzly Guitar BL8551 User Manual
Harman Kardon Stereo Receiver AVR4500 User Manual
Hearth and Home Technologies Electric Heater SFE 35 User Manual
HotBrick Network Router VPN 800 2 User Manual
Hotpoint Cooktop 50HEGS User Manual
Hotpoint Oven SY36B User Manual
HP Hewlett Packard Calculator 17bII User Manual
HP Hewlett Packard Switch RPC 2 User Manual
IBM Computer Hardware CIO DIO48H User Manual