Graco Inc Paint Sprayer 111418a User Manual

Operation  
GMAX II 3900/5900/5900HD/5900 Convertible/7900  
TexSpray 5900HD Convertible/7900HD  
Airless Sprayers  
310892F  
- For Portable Airless Spraying of Architectural Coatings and Paints -  
3300 psi (22.8 MPa, 228 bar) Maximum Working Pressure  
Read warnings and instructions  
ti5475a  
ti5447a  
ti5474a  
GMAX ll 3900  
248683  
248684  
248685  
248686  
GMAX ll 5900  
248687  
248688  
248689  
248690  
GMAX II 5900HD  
248699  
GMAX ll 5900 Convertible  
248691  
248692  
248693  
248694  
248695  
248696  
248697  
248889  
248890  
ti11418a  
GMAX ll 7900  
248700  
248701  
248702  
248703  
310893  
311046  
311861  
309640  
TexSpray 5900 HD Convertible  
310894  
255630  
255631  
255954  
TexSpray 7900 HD  
255632  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning  
Warning  
The following warnings include general safety information for this equipment. Further product specific warnings may  
be included in the text where applicable.  
WARNING  
FIRE AND EXPLOSION HAZARD  
Flammable fumes, such as solvent and paint fumes, in work area can ignite or explode. To help prevent  
fire and explosion:  
Use equipment only in well ventilated area.  
Do not fill fuel tank while engine is running or hot; shut off engine and let it cool. Fuel is flammable  
and can ignite or explode if spilled on hot surface.  
When flammable liquid is sprayed or used for flushing or cleaning, keep sprayer at least 20 feet (6 m)  
away from explosive vapors.  
Eliminate all ignition sources; such as pilot lights, cigarettes, portable electric lamps, and plastic drop  
cloths (potential static arc).  
Keep work area free of debris, including solvent, rags and gasoline.  
Do not plug or unplug power cords, or turn power or light switches on or off when flammable fumes  
are present.  
Ground equipment and conductive objects in work area. See Grounding instructions.  
Use only grounded hoses.  
Hold gun firmly to side of grounded pail when triggering into pail.  
If there is static sparking or you feel a shock, stop operation immediately. Do not use equipment  
until you identify and correct the problem.  
INJECTION HAZARD  
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look like just  
a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatment.  
Do not point gun at anyone or at any part of the body.  
Do not put your hand over the spray tip.  
Do not stop or deflect leaks with your hand, body, glove, or rag.  
Do not spray without tip guard and trigger guard installed.  
Engage trigger lock when not spraying.  
Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,  
checking, or servicing equipment.  
PRESSURIZED EQUIPMENT HAZARD  
Fluid from the gun/dispense valve, leaks, or ruptured components can splash in the eyes or on skin and  
cause serious injury.  
Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,  
checking, or servicing equipment.  
Tighten all fluid connections before operating the equipment.  
Check hoses, tubes, and couplings daily. Replace worn or damaged parts immediately.  
ELECTRIC SHOCK HAZARD  
Improper grounding, setup, or usage of the system can cause electric shock.  
Turn off and disconnect power cord before servicing equipment.  
Use only grounded electrical outlets.  
Use only 3-wire extension cords.  
Ensure ground prongs are intact on sprayer and extension cords.  
MOVING PARTS HAZARD  
Moving parts can pinch or amputate fingers and other body parts.  
Keep clear of moving parts.  
Do not operate equipment with protective guards or covers removed.  
Pressurized equipment can start without warning. Before checking, moving, or servicing equipment,  
follow the Pressure Relief Procedure in this manual. Disconnect power or air supply.  
310892F  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning  
WARNING  
EQUIPMENT MISUSE HAZARD  
Misuse can cause death or serious injury.  
Do not exceed the maximum working pressure or temperature rating of the lowest rated system  
component. See Technical Data in all equipment manuals.  
Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data in all  
equipment manuals. Read fluid and solvent manufacturer’s warnings.  
Check equipment daily. Repair or replace worn or damaged parts immediately.  
Do not alter or modify equipment.  
For professional use only.  
Use equipment only for its intended purpose. Call your Graco distributor for information.  
Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.  
Do not use hoses to pull equipment.  
Comply with all applicable safety regulations.  
PRESSURIZED ALUMINUM PARTS HAZARD  
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids  
containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical  
reaction and equipment rupture, and result in death, serious injury, and property damage.  
SUCTION HAZARD  
Never place hands near the pump fluid inlet when pump is operating or pressurized. Powerful suction  
could cause serious injury.  
CARBON MONOXIDE HAZARD  
Exhaust contains poisonous carbon monoxide, which is colorless and odorless. Breathing carbon mon-  
oxide can cause death. Do not operate in an enclosed area.  
TOXIC FLUID OR FUMES HAZARD  
Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or  
swallowed.  
Read MSDS’s to know the specific hazards of the fluids you are using.  
Store hazardous fluid in approved containers, and dispose of it according to applicable guidelines.  
BURN HAZARD  
Equipment surfaces and fluid that’s heated can become very hot during operation. To avoid severe  
burns, do not touch hot fluid or equipment. Wait until equipment/fluid has cooled completely.  
PERSONAL PROTECTIVE EQUIPMENT  
You must wear appropriate protective equipment when operating, servicing, or when in the operating  
area of the equipment to help protect you from serious injury, including eye injury, inhalation of toxic  
fumes, burns, and hearing loss. This equipment includes but is not limited to:  
Protective eyewear  
Clothing and respirator as recommended by the fluid and solvent manufacturer  
Gloves  
Hearing protection  
RECOIL HAZARD  
Brace yourself; gun may recoil when triggered and cause you to fall, which could cause serious injury.  
4
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Component Identification  
Component Identification  
13  
12  
11  
1
2
ON  
OFF  
3
10  
4
ON  
ti5738a  
OFF  
7
8
9
5
6
+
-
1
Engine controls  
2
3
4
5
6
7
8
Engine ON/OFF switch  
Premium Digital Display  
Pump On/Off Switch  
Pressure control  
Prime valve & Filter  
Suction tube & Inlet Filter  
Premium AutoClean  
(not available on all models)  
2
9
Pump  
10  
11  
Drain hose  
ProConnect  
12  
13  
Trigger Lock  
WatchDog switch  
310892F  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Setup  
ti5782a  
ti7747a  
ti5783a  
ti7539a  
ti5780a  
1. Connect appropriate  
Graco high-pressure  
hose to sprayer.  
2. Install adapter and 3. Install whip hose  
4. Tighten securely.  
5. Remove tip guard.  
3.6m whip hose to  
other end of 15m  
airless hose.  
to fluid inlet of  
spray gun.  
Tighten securely  
.
6
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Approximate Fill Level  
(cold)  
ti5952a  
ti5831a  
ti5787a  
ti7301a  
ti5953a  
6. Remove inlet  
strainer and filter  
bowl screen  
when spraying  
plaster materi-  
als.  
7. Fill throat packing  
nut with TSL to pre-  
vent premature  
packing wear. Do  
this each time you  
spray.  
8. Check engine oil  
level. Add SAE  
9. Fill fuel tank.  
10. Attach sprayer  
grounding clamp to  
earth ground.  
10W-30 (summer)  
or 5W-20 (winter), if  
necessary.  
310892F  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Convertible Models  
Release  
ti5774a  
ti5776a  
ti5777a  
ti5775a  
Change Engine to Motor  
1. Disconnect engine  
power cord.  
2. Release tension bar.  
3. Remove engine; tilt and  
slide back.  
4. Install motor; drop in and  
push forward.  
8
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setup  
Convertible Models  
Release  
ti5772a  
ti5779a  
ti5775a  
Change Motor to Engine  
1. Look through side vent  
holes and ensure drive  
belt is in motor pulley.  
2. Secure motor with ten-  
sion bar.  
3. Plug in pressure control  
power cord.  
310892F  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
Startup  
-!4%2)!,  
ti5789a  
/&&  
&,53(  
ti5790a  
ti5788a  
1. Place suction tube and  
drain tube in grounded  
metal pail partially filled  
with flushing fluid. Attach  
ground wire to pail and to  
earth ground.  
2. Turn prime valve down.  
Turn pressure control  
counterclockwise to low-  
est pressure.  
3. Set pump switch OFF.  
10  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
ti5250a  
ti5249a  
ti5248a  
ti5262a  
4. Start engine  
a
Move fuel valve to open.  
b
Move choke to closed.  
c
Set throttle to fast.  
d
Set engine switch to ON.  
310892F  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
/.  
TIꢀꢁꢂꢃA  
ti5263a  
ti5251a  
ti5958a  
5. Set pump switch ON.  
- Pump/clutch is now  
active -  
e
Pull starter rope.  
f
After engine starts, move  
choke to open.  
g
Set throttle to desired  
setting.  
12  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
15  
SEC  
ti5794a  
ti5796a  
FLUSH  
ti10167a  
6. Increase pressure enough 7. Take spray gun trigger  
8. Hold gun against  
Inspect fittings for leaks. Do not  
to start pump stroking and  
allow fluid to circulate for  
15 seconds; turn pressure  
down and turn prime valve  
horizontal.  
safety OFF.  
grounded metal flushing stop leaks with your hand or a rag!  
pail. Trigger gun and  
increase fluid pressure  
slowly until pump runs  
smoothly.  
If leaks occur, turn sprayer OFF  
immediately. Perform Pressure  
Relief steps 1 - 3 on page 23.  
Tighten leaky fittings. Repeat Start  
Up procedure steps 1 - 5. If no  
leaks, continue to trigger gun until  
system is thoroughly flushed. Pro-  
ceed to step 6.  
310892F  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
ti10166a  
SwitchTip  
Seat  
-!4%2)!,  
&,53(  
ti5798a  
ti5801a  
ti5797a  
ti5800a  
One seal  
SwitchTip and Guard Assembly  
9. Place siphon tube in  
material pail.  
10. Trigger gun again into  
flushing fluid pail until  
material appears.  
1. Put trigger safety ON.  
Insert SwitchTip. Insert  
2. Screw assembly onto  
gun. Hand tighten.  
seat and OneSeal .  
Assemble tip and guard,  
page 14.  
14  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Startup  
ti10166a  
ti10166a  
ti5823a  
heavy  
edges  
ti5825a  
ti5824a  
ti5826a  
ti10167a  
ti10167a  
Clearing Tip Clogs  
1. Trigger gun and spray  
test pattern. Slowly  
2. Hold gun perpendicular,  
10-12 in. (25-30 cm)  
from surface. Spray back  
and forth. Use strokes  
overlapped by 50%.  
Start gun movement  
before triggering gun  
and release trigger  
before stopping gun  
movement.  
1. Release trigger, put trig-  
ger safety ON. Rotate  
SwitchTip. Take trigger  
safety OFF and trigger  
gun to clear the clog.  
2. Put trigger safety ON,  
return SwitchTip to origi-  
nal position, take trigger  
safety OFF and continue  
spraying.  
adjust pressure to elimi-  
nate heavy edges. Use  
smaller tip size if pres-  
sure adjustment can not  
eliminate heavy edges.  
310892F  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
Premium Operation  
SMARTCONTROL  
ti5804a  
ti5802a  
-!4%2)!,  
&,53(  
/&&  
Main Menu  
Close cover when spraying to  
protect display.  
1. Do startup steps 1. - 3.  
2. Start engine, page 11.  
Sprayer Model momen-  
tarily displays, e.g.,  
G5900 = GMAX 5900  
Pressure display  
Note: Information other than  
pressure can not be  
accessed if system pressure  
is greater than 200 psi (14  
bar, 1.4 MPa) or if the pump  
switch is ON.  
appears. Dashes appear  
when pressure is less  
than 200 psi (14 bar, 1.4  
MPa).  
16  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
Digital Tracking System (DTS)  
SMARTCONTROL  
SMARTCONTROL  
SMARTCONTROL  
SMARTCONTROL  
SMARTCONTROL  
ti5808a  
ti5807a  
ti5806a  
ti6206a  
ti5805a  
3. Short press DTS  
button to move to  
Job Gallons (or  
Liters x 10).  
4. Press and hold  
to reset to zero,  
or short press  
DTS button to  
move to Life-  
Note: LIFE displays  
briefly, then the num-  
ber of gallons sprayed  
above 800 psi (55 bar,  
5.5 MPa).  
5. Short press DTS  
button to move to  
AutoClean2 Timer  
operation (Man-  
ual 309955).  
6. Short press DTS  
button to return  
to Pressure.  
Note: JOB displays  
briefly, then the  
number of gallons  
sprayed above 800  
psi (55 bar, 5.5  
MPa).  
time Gallons (or  
Liters x 10).  
Note: If the pump  
is started in the  
timer mode, the  
timer counts down  
to zero and shuts  
the pump OFF.  
Use for flushing  
only.  
310892F  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
WatchDog Protection System  
C
T
A
H
D
C
T
W
A
H
D
O
W
O
PSI  
G
G
SMARTCONTROL  
/.  
/.  
BAR  
PSI  
-0A  
/&&  
/&&  
ti6225a  
ti6224a  
ti6207a  
ti6208a  
Change Display Units:  
Pump stops automatically when material pail is empty.  
To Activate:  
1. Do Startup.  
2. Turn WatchDog switch  
ON and WD ON dis-  
plays.  
3. Turn WatchDog switch  
OFF. Add material or  
reprime sprayer. Turn  
pump switch OFF and  
ON to reset WatchDog  
protection system. Turn  
WatchDog switch back  
ON to continue to moni-  
tor material level.  
Pressure/Volume:  
Press and hold (8 seconds)  
DTS button to change pres-  
sure units (psi, bar, MPa), to  
desired units. Volume units  
(GAL, LTRx10) follow pres-  
sure units; i.e., psi/GAL and  
bar or MPa/LTRx10.  
EMPTY displays /  
flashes and the pump  
stops when WatchDog  
protection system  
detects an empty mate-  
rial pail.  
Continue to press DTS but-  
ton to cycle from psi to bar to  
MPa. Release DTS button to  
select units.  
18  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
SMARTCONTROL  
SMARTCONTROL  
ti5812a  
ti6213a  
-!4%2)!,  
ti5813a  
/&&  
&,53(  
Secondary Menu - Stored Data and WatchDog Pump Protection Modes  
1. Do Startup steps 1. - 3.  
Pressure must be at  
zero.  
2. Start engine, page 11.  
Pressure display  
appears.  
3. Press and hold DTS but- SERIAL NUM scrolls through  
ton and turn pump  
switch ON.  
display and a 3 to 5-digit  
serial number displays.  
Sprayer model momen-  
tarily displays, e.g.,  
G5900 = GMAX ll 5900.  
310892F  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
 
Startup  
SMARTCONTROL  
SMARTCONTROL  
SMARTCONTROL  
SMARTCONTROL  
ti6215a  
ti6216a  
ti6217a  
ti6220a  
Secondary Menu - Stored Data and WatchDog Pump Protection Modes  
4. Short press DTS button  
and date code displays.  
5. Short press DTS button  
and part number dis-  
plays.  
6. Short press DTS button  
and engine hours dis-  
plays.  
7. Short press DTS button  
and LAST ERROR  
scrolls through display  
followed by stored error  
message and error  
code. This information  
cycles repeatedly until  
cleared. See manual  
310893 for error code  
explanations.  
20  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
SMARTCONTROL  
SMARTCONTROL  
SMARTCONTROL  
SMARTCONTROL  
ti6221a  
ti5819a  
ti5820a  
ti6218a  
Secondary Menu - Stored Data and WatchDog Pump Protection Modes  
8. Press and hold DTS but- 9. Short press DTS button  
10. Short press DTS button  
again and SOFTWARE  
REV scrolls through dis-  
play followed by revision  
level; e.g., 02.  
11. Press and hold (8 sec-  
onds) DTS button to  
ton until CLEAR ERROR  
NO ERROR CODE  
scrolls through the dis-  
play and then error code  
E=00 displays. See  
Manual 310893.  
again to move to Watch-  
Dog mode. You may  
now short press and  
do step 10 or long  
press do step 11.  
move to WatchDog Trig-  
ger % menu. Continue to  
hold DTS button and  
WatchDog can be set to  
trigger at 30, 40, 50 or  
60% of current sprayer  
pressure setting.  
Release DTS button  
when desired % is dis-  
played. Default is 50%.  
310892F  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Startup  
SMARTCONTROL  
ti6219a  
ti5822a  
/&&  
Secondary Menu - Stored Data and WatchDog Pump Protection Modes  
12. Short press DTS button  
and software revision  
displays.  
13. Short press to return to  
Turn pump switch OFF  
at any time to exit stored  
data mode.  
22  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleanup  
Cleanup  
ti10117a  
ti10116a  
ti10116a  
OFF  
/&&  
/.  
ti5830a  
ti5822a  
PAINT  
ti5829a  
ti5827b  
ti5828a  
/&&  
Pressure Relief Procedure  
1. Lock gun trigger safety.  
Set pump switch OFF.  
Turn engine OFF.  
2. Unlock gun trigger safety.  
Turn pressure to lowest set-  
ting. Trigger gun into pail to  
relieve pressure.  
3. Lock gun trigger safety.  
Turn prime valve down.  
4. Remove guard  
and SwitchTip.  
If you suspect spray tip or hose is clogged or that pres-  
sure has not been fully relieved after following the steps  
above, VERY SLOWLY loosen tip guard retaining nut or  
hose end coupling to relieve pressure gradually, then  
loosen completely. Clear hose or tip obstruction.  
310892F  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleanup  
/.  
ti5978a  
-!4%2)!,  
&,53(  
ti5832a  
FLUSH  
ti5833a  
ti5979a  
ti5831a  
5. Unscrew bowl, remove  
filter. Assemble without  
filter. Clean fliter.  
6. Clean filter, guard and  
SwitchTip in flushing  
fluid.  
7. Remove siphon tube set  
from material and place  
in flushing fluid.  
8. Turn engine ON and  
start engine.  
Set pump switch ON.  
Use water for water  
base material and  
appropriate solvent for  
oil base material.  
Turn prime valve  
horizontal.  
24  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleanup  
ti5838a  
&,53(  
-!4%2)!,  
-!4%2)!,  
20 SEC  
OFF  
ti5981a  
ti5890a  
FLUSH  
/&&  
/.  
ti5822a  
ti5827b  
/&&  
9. Hold gun against mate-  
rial pail. Take trigger  
10. Move gun to flushing  
pail, hold gun against  
pail, trigger gun to thor-  
oughly flush system.  
Release trigger and put  
trigger safety ON.  
11. Turn prime valve down  
and allow flushing fluid  
to circulate for approxi-  
mately 20 seconds to  
clean drain tube.  
12. Raise siphon tube above  
flushing fluid and run  
sprayer for 15 to 30 sec-  
onds to drain fluid. Turn  
pump switch OFF. Turn  
engine OFF.  
safety OFF. Turn pres-  
sure control up until  
motor begins to drive  
pump. Trigger gun until  
flushing fluid appears.  
310892F  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Cleanup  
ti5843a  
ti5979a  
FLUSH  
ti5963a  
ti5840a  
FLUSH  
ti2895a  
ti5984a  
ti5973a  
Pump Armor  
Caution: If flushing with water, do  
not leave water in sprayer. Flush  
again with mineral spirits, oil or  
Pump Armor and leave this protec-  
tive coating in the sprayer to help  
prevent freezing or corrosion and  
increase sprayer life.  
13. Close prime valve. Trig-  
ger gun into flushing pail  
to purge fluid from hose.  
Open prime valve.  
14. Install filter into fil-  
ter bowl. Make  
15. Clean tip, guard and  
gasket with a soft bristle  
brush to prevent part  
failure due to dried  
materials. Assemble  
parts and attach loosely  
onto gun.  
sure plastic center  
tube is tightened  
securely. Hand  
tighten filter bowl.  
Hand tighten gun  
handle.  
Wipe sprayer, hose and  
gun with a rag soaked in  
water or mineral spirits.  
26  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty / Garantie / Garantía / Garanzia / Garantia  
Warranty / Garantie / Garantía / Garanzia / Garantia  
Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in  
material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty  
published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by  
Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco’s written  
recommendations.  
This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty  
installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of  
non-Graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with  
structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or  
maintenance of structures, accessories, equipment or materials not supplied by Graco.  
This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of  
the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned  
to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will  
be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation.  
THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED  
TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.  
Graco’s sole obligation and buyer’s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy  
(including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or  
consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale.  
GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A  
PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT  
MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to  
the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these  
warranties.  
In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or  
the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the  
negligence of Graco, or otherwise.  
POUR LES CLIENTS DE GRACO PARLANT FRANCAIS  
Les parties reconnaissent avoir convenu que la rédaction du présent document ainsi que de tous les documents, avis et procédures judiciaires  
exécutés, donnés ou intentés à la suite de ou en rapport, directement ou indirectement, avec les procédures concernées, sera en anglais.  
PARA LOS CLIENTES DE GRACO QUE HABLAN ESPAÑOL  
Las partes reconocen haber convenido que el presente documento, así como todos los documentos, notificaciones y procedimientos judiciales  
emprendidos, presentados o establecidos que tengan que ver con estas garantías directa o indirectamente, estarán redactados en inglés.  
PER I CLIENTI GRACO ITALIANI  
Le controparti riconoscono di aver richiesto che il presente documento, e tutti gli altri documenti, avvisi e informazioni di natura legale sottoscritti,  
conferiti o istituiti direttamente o indirettamente, siano redatti in lingua inglese.  
PARA CLIENTES PORTUGUESES DA GRACO  
As partes confirmam que solicitaram que o presente documento, assim como todos os demais documentos, notas e processos legais inseridos,  
atribuídos ou instituídos de acordo com o mesmo ou relacionados directa ou indirectamente com este documento, fossem redigidos em inglês.  
VOOR GRACO-KLANTEN IN NEDERLAND  
De partijen zijn zich ervan bewust dat zij hebben geëist dat het onderhavige document, evenals alle documenten, berichtgevingen en wettelijke  
procedures die worden aangegaan, overhandigd of in gang gezet hetzij als gevolg van hetzij rechtstreeks hetzij indirect in relatie tot het  
onderhavige worden opgesteld in de Engelse taal.  
ADDITIONAL WARRANTY COVERAGE  
Graco does provide extended warranty and wear warranty for products described in the “Graco Contractor Equipment Warranty Program”.  
310892F  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warranty / Garantie / Garantía / Garanzia / Garantia  
TO PLACE AN ORDER, contact your Graco distributor, or call 1-800-690-2894 to identify the nearest distributor.  
All written and visual data contained in this document reflects the latest product information available at the time of publication.  
Graco reserves the right to make changes at any time without notice.  
This manual is written in English GN 310892 MM 310892  
Graco Headquarters: Minneapolis  
International Offices: Belgium, Korea, China, Japan  
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441  
PRINTED IN U.S.A. 2/2005, Revised 06/2009  
28  
310892F  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Grizzly Paint Sprayer G5357 User Manual
Grundig Flat Panel Television GLCD4000HD GLCD4600HD User Manual
Haier CRT Television HTX25S31 HTX29S31S HTX34S31 User Manual
HANNspree Flat Panel Television HANNSrobby User Manual
Honeywell Scanner 800 Series User Manual
Hotpoint Washer WMF740 G A K User Manual
Husqvarna Automobile Accessories 953 51 17 01 User Manual
Hypertec Carrying Case N9618PHY User Manual
IBM Network Card PPC 1510PT User Manual
iLive MP3 Docking Station IC2807BLK User Manual