PD908B
INSTRUCTION MANUAL
Contents
Warnings & Precautions................................................................................... 2
Important Safety Instructions............................................................................ 3
In the Box & Features....................................................................................... 4
Powering the Unit............................................................................................. 5
Playing a DVD.................................................................................................. 6
Programming a DVD ........................................................................................ 7
Playing a CD..................................................................................................... 8
Programming a CD........................................................................................... 9
Using the Video/Audio Output ........................................................................ 10
Using the Video/Audio Input............................................................................11
Controls & Definitions................................................................................ 12-18
The Setup Menu............................................................................................. 19
Service Information......................................................................................... 20
Download from Www.Somanuals.com. All Manuals Search And Download.
Warnings and Precautions
Important Safety Instructions
obsolete outlet. Do not defeat the safety purpose
of the polarizes plug. personnel.
1. Read Instructions - All the safety and operating
instruction should be read before the product is
operated.
hazards. Refer all servicing to qualified service
Alternate Warnings - This product is equipped
with a three-wire grounding-type plug, a plug
having a third (grounding) pin. This plug will
only fit into a grounding-type power outlet. This
is a safety feature. If you are unable to insert the
plug into the outlet, contact your electrician to
replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
21. Damage Requiring Service - Unplug this
product from the wall outlet and refer servicing
to qualified service personnel under the
following conditions:
2. Retain Instructions - The safety and operating
instruction should be retained for future
reference.
This symbol, located on back or
bottom of the unit, is intended to alert
the user to the presence of uninsulated
“dangerous voltage” within the
product’s enclosure that may be of
sufficient magnitude to constitute a
risk of electric shock to persons.
This symbol, located on back or
bottom of the unit, is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
This product utilizes a Class 1 laser
to read Compact Discs. This laser
Compact Disc Player is equipped with
safety switches to avoid exposure
when the CD door is open and
the safety interlocks are defeated.
Invisible laser radiation is present
when the CD Player’s lid is open and
the system’s interlock has failed or
been defeated. It is very important
that you avoid direct exposure to the
laser beam at all times. Please do not
attempt to defeat or bypass the safety
switches.
3. Heed Warnings - All warning on the product
and in the operating instructions should be
adhered to.
a) When the power-supply cord or plug is
damaged,
b) If liquid has been spilled, or objects have
fallen into the product,
4. Follow instructions - All operating and use
instructions should be followed.
13. Power-Cord Protection - Power supply cords
should be routed so that they are not likely to be
walked on or pinched by items placed upon or
against them, paying particular attention to cords
at plugs, convenience receptacles, and point
where they exit from the product.
c) If the product has been exposed to rain, water
or moisture.
5. Cleaning - Unplug this product from the wall
outlet before cleaning. Do not use liquid cleaners
or aerosol cleaners. Clean only with a dry cloth.
accompanying the appliance.
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation.
6. Attachments - Do not use attachments not
recommended by the product manufacturer as
they may cause hazards.
14. Protective Attachment Plug - The product
is equipped with an attachment plug having
overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting
of protective device. If replacement of the plug is
required, be sure the service technician has used
a replacement plug specified by the manufacturer
that has the same overload protection as the
original plug.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE
BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
7. Water and Moisture - Do not use this product
near water - for example, near a bath tub, wash
bowl, kitchen sink, or laundry tub; in a wet
basement, or near a swimming pool, and the like.
The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids,
such as vases, shall be placed on apparatus.
e) If the product has been dropped or damaged
in any way, and
To reduce the risk of electric shock, do not remove cover (or back).
There are no user-serviceable parts inside. Please refer any servicing
to qualified service personnel.
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
15. Outdoor Antenna Grounding - If an outside
antenna is connected to the receiver, be sure the
antenna system is grounded so as to provide
some protection against voltage surges and built-
up static charges. Article 810 of the National
Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of
the mast and supporting structure, grounding of
the mast and supporting structure, grounding
of the lead-in wire to an antenna-discharge
unit, size of grounding conductors, location of
antenna-discharge unit, connection to grounding
electrodes, and requirements for the grounding
electrode.
22. Replacement Parts - When replacement parts
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteristics as
the original part. Unauthorized substitutions may
result in fire, electric shock, or other hazards.
L’appareil ne doit pas être exposê aux
écoulements ou aux éclaboussures et aucun objet
ne contenant de liquide, tel qu’un vase, ne doit
être placé sur l’objet.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
8. Accessories - Do not place this product on an
unstable cart, stand tripod, bracket, or table. The
product may fall, causing serious injury to a
child or adult, and serious damage to the product.
Use only with a cart, stand, tripod, bracket, or
table recommended by the manufacturer, or sold
with the product. Any mounting of the product
should follow the manufacturer’s instructions,
and should use a mounting accessory
23. Safety Check - Upon completion of any
service or repairs to this product, ask the service
technician to perform safety checks to determine
that the product is in proper operating condition.
WARNING: Danger of explosion if the remote control’s batteries are incorrectly installed. Replace only
with the same or equivalent battery.
24. Wall or Ceiling Mounting - The product
should be mounted to a wall or ceiling only as
recommended by the manufacturer.
recommended by the manufacturer.
WARNING: The remote control’s button cell battery contains mercury. Do not put in the trash, instead
recycle or dispose of as hazardous waste
See figure:
25. Heat - The product should be situated away from
heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers)
that produce heat. Battery shall not be exposed
to excessive heat such as sunshine, fire, or the
like.
9. Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
WARNING: Use of this unit near fluorescent lighting may cause interference regarding use of the remote.
If the unit is displaying erratic behavior move away from any fluorescent lighting, as it may be the cause.
See figure:
Les piles ne doivent pas être exposées à de forte
chaleur, tel qu’à la lumière du soleil, au feu ou
autres choses de semblable.
26. Main plug is used as disconnect device and it
should remain readily operable during intended
use. In order to disconnect the apparatus from
the mains completely, the mains plug should
be disconnected from the mains socket outlet
completely.
16. Lightning - For added protection for this
product during a lightning storm, or when it
is left unattended and unused for long periods
of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will
prevent damage to the product due to lightning
and power-line surges.
WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.
10. Ventilation - Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never
be blocked by placing the product on a bed, sofa,
rug, or other similar surface. This product should
not be placed in a built-in installation such as
a bookcase or rack unless proper ventilation is
provided or the manufacturer’s instruction have
been adhered to.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or rechargeable (ni-cad, ni-mh, etc) batteries.
La prise du secteur ne doit pas être obstruée
ou doit être facilement accessible pendant son
utilisation. Pour être complètement déconnecté
de l’alimentation d’entrée, la prise doit être
débranchée du secteur.
17. Power Lines - An outside antenna system should
not be located in the vicinity of overhead power
lines or other electric light or power circuits, or
where it can fall into such power lines or circuits.
When installing an outside antenna system,
extreme care should be taken to keep from
touching such power lines or circuits as contact
with them might be fatal.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
27. Excessive sound pressure from earphones and
headphones can cause hearing loss.
Des pressions acoustiques excessives provenant
d’écouteurs ou de casques peuvent provoquer
des pertes de l’audition.
11. Power Sources - This product should be
operated only from the type of power source
indicated on the marking label. If you are not
sure of the type of power supply to your home,
consult your product dealer or local power
company. For products intended to operate from
battery power, or other sources, refer to the
operating instruction.
18. Overloading - Do not overload wall outlets,
extension cords, or integral convenience
receptacles as this can result in a risk of fire or
electric shock.
28. To prevent fire or shock hazard, do not use this
plug with an extension cord, receptacle or other
outlet unless the blades can be fully inserted to
prevent blade exposure.
19. Object and Liquid Entry - Never push objects
of any kind into this product through openings
as they may touch dangerous voltage points
or short-out parts that could result in a fire or
electric shock. Never spill liquid of any kind on
the product.
29.
Symbol is used to indicate that a
specific component shall be replaced
only by the component specified in
that documentation for safety reasons.
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
12. Grounding or Polarization - This product may
be equipped with a polarized alternating-current
line plug (a plug having one blade wider than
the other). This plug will fit into the power outlet
only one way. This is a safety feature. If you are
unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail
to fit, contact your electrician to replace your
30. Rating label and “CAUTION MARKING” are
located at bottom of enclosure.
20. Servicing - Do not attempt to service this
product yourself as opening or removing covers
may expose you to dangerous voltage or other
31.
This symbol indicates that this product
incorporates double insulation.
Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily
operable.
3
2
Download from Www.Somanuals.com. All Manuals Search And Download.
In the Box
Powering the Unit
Power the unit and charge the internal battery by plugging it into a standard AC (120V
- 60Hz) Outlet, using the included AC/DC Adapter, or by plugging it into the DC
Power Outlet in an automobile, using the included DC Power Car Adapter.
• PD908R
Battery Information
The internal battery can be charged by using the included AC/DC Adapter, or the DC
Car Adapter.
• Remote Control
• AC/DC Adapter
• DC Power Car Adapter
• 1-set Stereo Earbuds
• Documentation
With a full charge, the internal battery can last up to 2.5 hours.
Remote Battery Information
Features
Danger of explosion if the remote control’s batteries are incorrectly installed. Replace
only with the same or equivalent battery. Battery type: CR2025
• Plays DVD-R/RW, DVD+R/RW &
JPEG Discs
• 16:9 Aspect Ratio
• Composite Output
• Plays CD/CD-R/CD-RW Audio Tracks
• Chapter / Title Search & Select
• Supports Multiple Languages and
Language Sub Titles
• Stereo Headphone Jacks
• Video/Audio Input Jack, 3.5mm type
• Video/Audio Output Jack, 3.5mm type
• Full-Feature Remote-Uses CR2025
Button Cell Battery
CR2025
• Zoom Feature
OPEN
• Multi-Language OSD: On-Screen
Display in English, French and Spanish • Dual Voltage AC/DC Adapter, UL/CUL
• AC/DC Adapter
• Multi-Angle Play
Listed
• Still Picture & Slow Motion
• NTSC
• Built-In Speaker
• Rechargeable Battery built in-Battery
Life: Up to 2.5 Hours
• 1-set Stereo Earbuds
PUSH
• 9” TFT LCD Screen
• Screen Display Swivels for adjustable
viewing angle
4
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Location of Controls
Control Definitions
1
2
3
LCD Display
9” TFT LCD Screen.
DVD/CD Door
Open the DVD/CD Door to expose the DVD/CD Drive.
1
Audio Button
In DVD Mode, press the Audio Button to cycle through available audio languages
for a specific DVD.
4
5
6
7
8
9
Menu Button
Press the Menu Button in DVD Mode to access a DVD’s main menu.
Stop Button
2
Press the Stop Button to stop a CD or DVD during play.
Volume Buttons
Press the Volume Buttons to adjust the volume of the audio output from the unit.
DVD/AV In Button
Press the DVD/AV In Button to switch between DVD and AV In Mode.
Setup Button
3
4
In DVD Mode, press the Setup Button to access the DVD Setup Menu.
7
8
Skip Buttons
Press the Skip Buttons to skip through the chapter or tracks of a loaded DVD or
CD.
9
10 Play/Pause Button
10
5
6
Press the Play/Pause Button to play or pause a loaded DVD or CD.
11 Directional Buttons
Use the Directional Buttons to navigate through a DVD or CD.
12 Enter Button
11
Press the Enter Button to select media on a DVD or CD.
13 Open Button
Press the Open Button to open the DVD/CD Door.
12
13
6
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Location of Controls
Control Definitions
14 Headphone Jacks
Connect headphones or earbuds to the Headphone Jacks to listen to the unit in
private.
15 Audio/Video Input and Output
Use the Audio/Video Input and Output to connect the unit to a television, DVD
Player, or other audio device. See pages 8 and 9.
16 Power Indicator Light
When the Power Indicator Light is lit green, the unit is powered on.
17 Infrared Receiver
The Infrared Receiver receives signals sent from the remote.
18 DC In (9V-12V)
Use the DC In to connect the unit to an AC Outlet or a DC Car Outlet to power the
unit.
16
17
19 Charge Indicator Light
When the Charge Indicator Light blinks red, the internal battery is being charged.
If the Charge Indicator Light is not blinking, the internal battery is fully charged.
20 Power Switch
Adjust the Power Switch to turn the unit off or on.
18
14
15
19
20
8
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Location of Controls
Control Definitions
21 Display Button
21
34
35
Press the Display Button to view the on screen display and see time information on
the DVD or CD that is playing.
22 DVD/AV In/Power Button
Press the DVD/AV In/Power Button to switch between DVD and AV In Mode.
Press the Power Button once to turn the unit on, and press and hold the Power But-
ton to turn the power off.
22
23
24
23 Volume Buttons
Press the Volume Buttons to adjust the volume of the unit.
24 Repeat A-B and 1/ALL
When playing a DVD, press the Repeat A-B and 1/All Button once to designate
an “A” point. Press the Repeat A-B and 1/All Button a second time to designate
a “B” point and repeat the section of DVD movie between point “A” and point
“B”. When playing a CD, press the Repeat A-B and 1/All Button once to repeat an
individual track of a CD. Press the Repeat A-B and 1/All Button twice to repeat an
entire CD.
36
25 Menu Button
25
26
37
38
39
Press the Menu Button in DVD Mode to access a DVD’s main menu.
26 Subtitle Button
In DVD Mode, press the Subtitle Button to cycle through available subtitle options
for a specific DVD.
27
28
27 Play Button
Press the Play Button to play a loaded DVD or CD.
40
41
28 Title Button
In DVD Mode, press the Title Button to view the title screen on a DVD.
29
• The Title Button will only work with compatible DVDs.
30
31
29 Audio Button
In DVD Mode, press the Audio Button to cycle through available audio languages
for a specific DVD.
42
43
44
30 Pause/Step Button
32
33
In DVD Mode, press the DVD Pause & Step Button once to pause a DVD during
play. Press the DVD Pause & Step Button consecutively to skip one frame at a
time while playing a DVD.
31 Search Buttons
Press the Search Buttons to search through a DVD or an individual CD track.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Control Definitions
Setup Menu
32 Angle Button
To enter the Setup Menu, press the Setup Button on the remote control.
In DVD Mode, press the Angle Button to view alternate angles.
• The Angle Button will only work with compatible DVDs.
-
-
GENERAL SETUP PAGE
-
-
T V DISPLAY
LCD MODE
ANGLE MARK
OSD LANG
PS
Wide
ON
ENG
OFF
33 Zoom Button
In DVD Mode, press and hold the Zoom Button to zoom in and out during a DVD
movie.
SCREEN SAVER
34 Setup Button
In DVD Mode, press the Setup Button to access the DVD Setup Menu.
Go To General Setup Page
35 TFT Set Button
Press the TFT Set Button to adjust the Contrast or Brightness of the TFT Display.
General Setup Page
36 Number Keypad
TV Display - The TV Display setting is automatically locked to Wide.
Use the Number Keypad when entering numbers in for operations.
LCD Mode - The LCD Mode can be switched between 4:3 (Low) or 16:9 (Wide)
aspect ratios.
37 Wide Button
In DVD Mode, press the Wide Button to switch between a 4:3 viewing ratio and a
16:9 (wide screen) viewing ratio.
Angle Mark - When the Angle Mark is on, an icon will appear on-screen to indi-
cate that DVD supports different angle views.
38 Stop Button
OSD LANG - The On-Screen-Display Language can be adjusted to English,
French, or Spanish.
Press the Stop Button to stop a DVD or CD during play.
39 Directional Buttons
Screen Saver - The screen saver can be turned off or on.
Preference Page
Use the Directional Buttons to navigate through a DVD or CD.
40 Enter Button
TV Type - NTSC
Press the Enter Button to select media on a DVD or CD.
Audio - Use the Audio Setting to adjust the Audio Language of a loaded DVD.
41 Slow Button
Subtitle - Use the Subtitle Setting to adjust the Subtitle Language of a loaded
DVD.
In DVD Mode, press the Slow Button to view a DVD movie in slow motion.
42 Skip Buttons
Disc Menu - Use the Disc Menu Setting to adjust the Disc Menu Language of a
loaded DVD.
Press the Skip Buttons to skip between DVD chapters or CD tracks.
43 Search Button
Default - Press the default setting to adjust the preferences to their default settings.
In DVD Mode, press the Search Button and type in, using the Number Keypad, a
specific title and chapter number or DVD time, and go to that spot on the DVD im-
mediately.
Video Setup Page
TV Quality - The TV Quality setting allows the Brightness, Contrast, Hue, and
Saturation to be adjusted for the output video signal.
44 Program Button
In CD or DVD Mode, press the Program Button to program tracks or chapters and
titles to play in a designated order. (See the Operations section for instructions on
Programming a CD or DVD)
LCD Quality - The LCD Quality setting allows the Brightness, Contrast, Hue, and
Saturation to be adjusted for the LCD screen.
Exit
Press the Exit icon (X) to exit the setup menu.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Playing a DVD
Programming a DVD
1. Press the Open Button to open the DVD/CD Drive.
1. Insert a DVD into the unit. See the “Playing a DVD” operation on page 6.
2. Load a DVD into the DVD/CD Drive of the unit.
2. After the DVD is inserted and loaded, press the Program Button on the remote
control to display the Program Menu.
The DVD will begin to play automatically. If the DVD does not begin to play
automatically, press the Play/Pause Button.
3. Use the Directional Buttons to move through the different program slots.
3. Press the Play/Pause Button to play or pause the DVD.
4. Press the Stop Button to stop the DVD during play.
4. Highlight a slot and enter a Title (TT) number and Chapter (CH) number using the
Number Keypad on the remote control. Repeat steps 3 and 4 until the desired
titles and chapters are programmed.
5. Press the Skip Buttons to skip backwards or forwards through the DVD’s
chapters. Press and hold the Skip Buttons to search backwards or forwards
through a DVD.
5. Press the Enter Button to begin playing the programmed titles and chapters.
6. Press the Volume Buttons to adjust the volume of the unit.
Playing a JPEG Disc
1. Press the Open Button to open the DVD/CD Drive.
2. Load a JPEG disc into the DVD/CD Drive of the unit.
3. Press the Play/Pause Button to play a slideshow or pause the JPEG disc.
4. Press the Stop Button to stop the JPEG disc during a slideshow.
5. Press the Skip Buttons to skip backwards or forwards through the JPEG disc’s
images.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Playing a CD
Programming a CD
1. Press the Open Button to open the DVD/CD Drive.
1. Insert a CD into the unit. See the “Playing a CD” operation on page 7.
2. Load a CD into the DVD/CD Drive of the unit.
2. After the CD is inserted and loaded, press the Program Button on the remote
control to display the Program Menu.
The CD will begin to play automatically. If the CD does not begin to play
automatically, press the Play/Pause Button.
3. Use the Directional Buttons on the remote to move through the twenty different
program slots.
3. Press the Play/Pause Button to play or pause the CD.
4. Press the Stop Button to stop the CD during play.
4. Highlight a slot and enter CD track numbers using the Number Keypad on the
remote control. Repeat steps 3 and 4 until the desired tracks are programmed.
5. Press the Skip Buttons to skip backwards or forwards through the CD’s tracks.
Press and hold the Skip Buttons to search backwards or forwards through a CD.
5. Press the Enter Button to begin playing the programmed tracks.
6. Press the Volume Buttons to adjust the volume of the unit.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Using the Video/Audio Output
Using the Video/Audio Input
When connecting two products using an RCA Cable, match the colored ports with
the same colored connection. (Red to Red, White to White, and Yellow to Yellow)
When connecting two products using an RCA Cable, match the colored ports with
the same colored connection. (Red to Red, White to White, and Yellow to Yellow)
1. Connect the 3.5mm - RCA Cable (not included) to the AV Output on the unit and
1. Connect the 3.5mm - RCA Cable (not included) to the AV Input on the unit and
the audio/video inputs on the Television.
the audio/video inputs on the DVD Player, Television, or Audio Device.
2. Turn the unit on by switching the Power Button to the On position.
2. Turn the unit on by adjusting the Power Button to the On position.
3. Press the DVD/AV In Button to switch between DVD and AV In Mode.
3. Change the television to the correct audio/video input setting.
4. Audio and video played through the unit will now be seen and heard on the
connected television.
4. Adjust the DVD Player, Television, or Audio Device to the correct audio/video
output setting.
5. Audio and video played through the DVD Player, Television, or Audio Device will
now be seen and heard on the unit.
Television
DVD Player, Television,
or Audio Device
18
Download from Www.Somanuals.com. All Manuals Search And Download.
19
|