Global Machinery Company Trimmer RM1000 User Manual

1000W  
REAR MOTOR  
LINE TRIMMER  
RM1000  
INSTRUCTION MANUAL  
Code: RM1000  
Date: 061221  
Black  
Cyan  
Magenta  
Yellow  
Edition: 04  
Op: DCR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Description of symbols  
Your new GMC power tool will more than satisfy  
your expectations. It has been manufactured under  
stringent GMC Quality Standards to meet superior  
performance criteria.  
The rating plate on your tool may show symbols.  
These represent important information about the  
product or instructions on its use.  
Wear hearing protection.  
Wear eye protection.  
Wear breathing protection.  
You will find your new tool easy and safe to operate,  
and, with proper care, it will give you many years  
of dependable service.  
Double insulated for additional protection.  
CAUTION. Carefully read through this entire Instruction  
Manual before using your new GMC Power Tool. Take  
special care to heed the Cautions and Warnings.  
Conforms to relevant standards  
for electromagnetic compatibility.  
Your GMC power tool has many features that will make  
your job faster and easier. Safety, performance, and  
dependability have been given top priority in the  
development of this tool, making it easy to maintain  
and operate.  
Use at a distance of at least 5m from  
other people.  
If cordset is damaged remove it from the  
plug immediately and have it replaced by an  
authorised service centre.  
Environmental protection  
Do not use in the rain.  
Recycle unwanted materials instead  
of disposing of them as waste. All tools,  
hoses and packaging should be sorted,  
taken to the local recycling centre and  
disposed of in an environmentally safe way.  
Thrown objects and rotating line can  
cause severe injury.  
Sharp blade.  
Warning.  
Read these instructions for use carefully.  
Specifications  
Voltage:  
230-240Vac ~ 50Hz  
1000W  
Input power:  
No load speed:  
Cut diameter (swathe):  
Line thickness:  
Spool type:  
7500 min-1  
380mm  
2.0mm  
Bump Feed  
Yes  
Secondary handle:  
Tool weight:  
4kg  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Personal safety  
Safety instructions  
Stay alert, watch what you are doing and use common  
sense when operating a power tool. Do not use a  
power tool while you are tired or under the influence of  
drugs, alcohol, or medication. A moment of inattention  
while operating power tools may result in serious  
personal injury.  
WARNING. Read and understand all instructions. Failure  
to follow all instructions listed below may result in electric  
shock, fire and/or serious injury. The term “power tool” in all of  
the warnings below refers to your mains-operated (corded)  
power tool or battery-operated (cordless) power tool.  
Save these instructions  
Work area  
Use safety equipment. Always wear eye protection.  
Safety equipment such as a dust mask, non-skid  
safety shoes, hard hat, or hearing protection used for  
appropriate conditions will reduce personal injuries.  
Keep work area clean and well lit. Cluttered and dark  
areas invite accidents.  
Do not operate power tools in explosive atmospheres,  
such as in the presence of flammable liquids, gases, or  
dust. Power tools create sparks which may ignite the dust  
or fumes.  
Avoid accidental starting. Ensure the switch is in the  
off-position before plugging in. Carrying power tools  
with your finger on the switch or plugging in power tools  
that have the switch on invites accidents.  
Keep children and bystanders away while operating a  
power tool. Distractions can cause you to lose control.  
Remove any adjusting key or wrench before turning  
the tool on. A wrench or a key that is left attached  
to a rotating part of the power tool may result in  
personal injury.  
Electrical safety  
Power tool plugs must match the outlet. Never modify  
the plug in any way. Do not use any adapter plugs with  
earthed (grounded) power tools. Unmodified plugs and  
matching outlets will reduce risk of electric shock.  
Do not overreach. Keep proper footing and balance at  
all times. This enables better control of the power tool in  
unexpected situations.  
Avoid body contact with earthed or grounded surfaces  
such as pipes, radiators, ranges and refrigerators. There  
is an increased risk of electric shock if your body is  
earthed or grounded.  
Dress properly. Do not wear loose clothing or jewellery.  
Keep your hair, clothing and gloves away from moving  
parts. Loose clothes, jewellery or long hair can be caught  
in moving parts.  
Do not expose power tools to rain or wet conditions.  
Water entering a power tool will increase the risk of  
electric shock.  
If devices are provided for the connection of dust  
extraction and collection facilities ensure that these are  
connected and properly used. Use of these devices can  
reduce dust-related hazards.  
Do not abuse the cord. Never use the cord for carrying,  
pulling or unplugging the power tool. Keep cord away  
from heat, oil, sharp edges or moving parts. Damaged or  
entangled cords increase the risk of electric shock.  
Power tool use and care  
Do not force the power tool. Use the correct power tool  
for your application. The correct power tool will do the job  
better and safer at the rate for which it was designed.  
When operating a power tool outdoors, use an outdoor  
extension cord suitable for outdoor use. Use of a cord  
suitable for outdoor use reduces the risk of electric shock.  
Do not use the power tool if the switch does not turn it on  
and off. Any power tool that cannot be controlled with the  
switch is dangerous and must be repaired.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Disconnect the plug from the power source before  
making any adjustments, changing accessories, or  
storing power tools. Such preventive safety measures  
reduce the risk of starting the power tool accidentally.  
Additional safety rules for line trimmers  
Always wear adequate protective clothing when operating  
the machine to avoid injuries to face, eyes, hands, feet,  
head or hearing. Use safety glasses or a face shield, high  
boots or sturdy shoes, long trousers, work gloves, a hard  
hat and hearing protection.  
Store idle power tools out of the reach of children and do  
not allow persons unfamiliar with the power tool or these  
instructions to operate the power tool. Power tools are  
dangerous in the hands of untrained users.  
When starting up and when the machine is in operation,  
keep the cutting section away from all parts of the body,  
especially the hands and feet.  
Maintain power tools. Check for misalignment or binding  
of moving parts, breakage of parts and any other  
condition that may affect the power tool’s operation. If  
damaged, have the power tool repaired before use. Many  
accidents are caused by poorly maintained power tools.  
Do not start the machine when it is upside down or when  
it is not in the operating position.  
Switch the motor off and pull out the plug when the  
machine is not being used, left unattended, being  
cleaned, being moved from one place to another or  
when the spool is being changed or the length of line  
manually adjusted.  
Keep cutting tools sharp and clean. Properly maintained  
cutting tools with sharp cutting edges are less likely to  
bind and are easier to control.  
Use the power tool, accessories and tool bits etc., in  
accordance with these instructions and in the manner  
intended for the particular type of power tool, taking  
into account the working conditions and the work to be  
performed. Use of the power tool for operations different  
from intended could result in a hazardous situation.  
If there is an interruption to the power supply or the  
extension cable is damaged, switch off the machine  
immediately and remove the plug from the power point.  
Do not move the machine by pulling on the electrical  
cable. Always use the handgrip.  
Do not operate the machine near people, especially  
children or pets. Turn it off if they get too close. Maintain  
a safe distance of at least 5m from other people when  
using the machine.  
Service  
Have your power tool serviced by a qualified repair  
personnel using only identical replacement parts. This will  
ensure that the safety of the power tool is maintained.  
Keep a balanced and stable stance while using  
the machine.  
Additional safety Instructions  
This appliance is not intended fot he use by young and  
infirm person unles have been adequately supervised  
by a responsible person to ensure that they can use the  
appliance safely. Young children should be supervised to  
ensure that they do not play with thhe appliance  
Ensure that the area being cut is free from strings,  
stones and debris.  
Do not cut against hard objects. This could cause injury  
to the operator and damage to the machine.  
Never use the machine without the guard. Never use the  
machine if the guard is damaged.  
Before use check the supply and extension cord of signs  
of damage or aging. If the cord becomes damaged during  
use, disconnect the cord from the supply immediately.  
DO NOT TOUCH THE CORD BEFORE  
WARNING. The guard is vital for your and other people’s  
safety and for the machine’s operating efficiency.  
DISCONNECTING THE SUPPLY. Do not use the  
applance if the cord is damaged or worn.  
Do not try to stop the cutting device (nylon line) with your  
hands. Always let it come to a stop by itself.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING. After switching off the machine, the cutting  
device continues to rotate for a few more seconds.  
Unpacking  
Due to modern mass production techniques, it is unlikely  
that your power tool is faulty or that a part is missing.  
If you find anything wrong, do not operate the tool until the  
parts have been replaced or the fault has been rectified.  
Failure to do so could result in serious personal injury.  
Only use the original type of nylon line. Under no  
circumstances use metal line instead of nylon.  
Do not use the machine to cut grass which is not on the  
ground. For example, do not cut grass which is on walls  
or rocks.  
Contents of carton  
Secondary handle with clamp nut and locking knob  
Do not switch on the machine in enclosed or poorly  
ventilated spaces or in the presence of inflammable  
and/or explosive substances such as liquids, gasses  
and powders.  
Safety guard (2 parts)  
5 Safety guard fixing screws  
2 Guard washers (1 split, 1 flat)  
Carry strap  
Only cut during broad daylight or with adequate  
artificial light.  
Check that all grass cuttings and dirt have been removed  
from the ventilation vents.  
Do not cross roads or gravel paths with the machine  
still running.  
When the machine is not in use, store it in a dry place  
and out of reach of children.  
After use, disconnect the machine from the power supply  
and check for damage. If you have the slightest doubts,  
contact an authorised service centre.  
Only use the machine according to the instructions given  
in this manual.  
Check regularly that the screws are tight.  
Do not try to repair the machine or access internal parts.  
Contact authorised service centres only.  
Do not get distracted and always concentrate on what  
you are doing. Use common sense. Never operate the  
machine when you are tired, sick or under the influence  
of alcohol or other drugs.  
Wear goggles  
Wear ear defenders  
Wear a breathing mask  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
16. Secondary handle locking knob  
17. Shaft locking nut  
Know your product  
14  
2
Before using the line trimmer,  
familiarise yourself with all the  
operating features and safety  
requirements.  
18. Guard locking screw  
19. Guard split washer  
20. Guard washer  
This line trimmer is to be used for  
trimming soft, new growth only. Use  
the tool and accessories only for  
the applications intended. All other  
applications are expressly ruled out.  
21. Guard fixing screws  
22. Guard fixing point  
23. Upper shaft  
1
4
1. Power cable restraint  
2. Handle  
3. Trigger switch  
4. Secondary handle  
5. Lower shaft  
23  
18  
19  
20  
6. Trimming head  
7. Guard  
8. Line cutting blade  
9. Spool  
5
16  
21  
10  
10. Safety guard mount  
11. Shaft locking knob  
12. Shaft locking button  
13. Lock-off button  
14. Carry strap hook  
15. Carry strap  
15  
11  
13  
17  
8
9
7
12  
6
3
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Assembly  
To attach the two sections of the shaft  
It is necessary to fit the guard (7) to the lower shaft (5) and  
the secondary handle (4) to the upper shaft (23).  
1. Align the two sections of the shaft and, keeping the  
head straight, fully insert the lower section until the shaft  
locking button (12) engages in the locating hole in the  
upper shaft. The head will be in the normal operating  
position.  
1. Ensure the switch is in the  
off position and disconnect  
the cable plug from the  
mains supply.  
Note. If the two shafts do not fully fit together, rotate the  
head of the line trimmer to assist in aligning the drive shafts.  
2. Position the safety guard  
mount (10) at the bottom of  
the lower shaft. Ensure the  
middle hole of the mount  
lines up with the guard fixing  
point (22).  
2. Tighten the upper shaft section to the lower shaft by  
turning the shaft locking knob (11) clockwise and firmly  
gripping the shaft locking nut (17).  
3. Place the guard split washer  
(19), followed by the guard  
washer (20) onto the guard  
locking screw (19), insert into  
the centre hole of the safety  
guard mount and tighten into  
the guard fixing point.  
Fitting the carry strap  
1. Hook the strap (15) to the carry strap hook (14) on the  
front of the handle.  
4. Fix the guard in place with the  
four fixing screws (21).  
2. Adjust the length of the strap as required.  
Before starting  
Before use, check that the tool is in good working order and  
that the length of the trimmer line is correct, as follows:  
1. Ensure the switch is in the off position and disconnect the  
cable plug from the mains supply.  
2. Examine the general condition of the tool. Inspect the  
guard, switch, cordset and extension cord. Check for  
loose screws, misalignment, binding of moving parts,  
improper mounting, broken parts and any other condition  
that may affect its safe operation.  
5. Fit the secondary handle (4) to the upper shaft (23) by  
fitting the handle over the shaft and placing the locking  
clamp nut (included) through the holes in the guard  
and tightening in the most comfortable position to the  
secondary handle locking knob (16).  
If abnormal noise or vibration occurs during operation,  
turn the line trimmer off immediately and have the  
problem corrected.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Ensure that you are on a  
flat surface and have secure  
footing.  
Note. To feed out line when you bump the base of  
the trimmer, the line trimmer must be operating close to  
full speed.  
4. Check that the line touches  
or goes beyond the edge of  
the guard.  
A spring-loaded button on the spool holder is depressed  
when the trimmer is “bumped” and this releases line due to  
the inertial force of the spinning spool. If too much line is fed  
out and it projects beyond the guard edge, it is cut by the  
blade in the guard. It is only necessary to replace line that  
is broken during use. Do not “bump” to excess as it wastes  
line. It takes a little practice and experience to judge when  
to “bump”.  
WARNING. For your own safety  
when adjusting the length of the line, avoid coming into  
contact with the line cutting blade (8) which is fixed to the  
guard. It is extremely sharp. Keep your hands well away  
from this area.  
Note. Do not cut damp or wet grass. Dry grass will give  
excellent results.  
Switching on and off  
1. Connect the plug to the  
power supply.  
Note. Always let the line trimmer rotate at top speed, do not  
work in such a way as to overload the trimmer.  
4. Cut the grass by swinging the machine from right to left  
and proceed slowly keeping the trimmer inclined forwards  
at an angle of about 30º.  
Starting  
2. Depress the lock-off button  
(13) and squeeze the trigger  
switch (3).  
5. High grass should be cut in layers always beginning from  
the top. Do not cut damp or wet grass. Do not overload  
your machine.  
Stopping  
3. When you release the trigger, the machine turns  
off and the lock-off button re-engages to prevent  
accidental operation.  
6. Avoid wearing the line out quickly by knocking against  
hard objects (stones, walls, fences etc.).  
7. Watch out for kickbacks in the event of impact with  
hard objects.  
WARNING. The tool runs for approximately 5 seconds after  
it has been switched off. Let the motor come to a complete  
standstill before setting the tool down.  
WARNING. Never pass the machine over the extension  
cable while the machine is running. Make sure it is always  
in a safe position behind your back.  
Trimming  
1. Make sure that the work area is free of rocks, debris,  
lines and other foreign objects.  
Changing the line and spool  
1. Disconnect the trimmer from  
the power supply.  
2. To start the line trimmer, first push the lock-off button  
(13) and then press the trigger switch (3). To switch off  
the trimmer simply release the starting switch. Start the  
machine before approaching the grass to be cut.  
2. Turn the machine upside  
down, so you have access to  
the cutting line in the trimming  
head.  
3. Short or worn line cuts less efficiently, so to improve its  
operation tap the spool lightly on the ground while the  
trimmer is running at full speed. This will activate the self-  
adjustment of the cutting line to the correct length.  
3. Whilst holding the trimming  
head (6), turn the spool (9)  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
anti-clockwise, as indicated by  
the “OFF” arrow, to unscrew it  
from the trimming head (6).  
9. When operating for the first  
time after changing the spool  
of line ensure to test the  
assembly by running the line  
trimmer in a safe location. The  
line may not be fully extended  
so you may need to “bump”  
the head at full speed to feed  
the line to the correct length.  
4. The spool will then become  
loose. Remove the spool and  
spring from the spindle.  
5. Cut two 3m equal lengths of  
2mm line. Thread the first line  
through the top hole, above  
the spool divider. Wind it in  
an anti-clockwise direction, as  
shown by the arrows on the  
base of the spool. Then insert  
the other length of line in the  
bottom hole and wind it in anti-  
clockwise around the spool.  
Power cable restraint  
During the use of the line  
trimmer, the extension cord will  
continually be pulled as you  
move from one area to another.  
A power cable restraint (1)  
support has been provided on  
the housing of the line trimmer to  
assist in preventing the electrical  
connection between the extension  
cord and the line trimmer plug  
being forced apart.  
6. Leaving 15cm of line, lock  
each end into the slots on  
opposite sides of the spool.  
7. Place the spring over the  
spindle. Insert each of the  
cutting lines through the  
eyelets in the cutting head  
assembly. Feed the line  
through the holes while  
lowering the spool.  
Note. The support is for the extension cord, and not the  
cable from the line trimmer.  
To fit the extension cord to the support, make a loop in the  
extension cord and fit the loop into the curved recess at the  
back of the line trimmer. Push the loop downwards so it fits  
securely into the round cut away section.  
8. Once the spool is in place,  
apply pressure on the spool,  
compressing the spring. Pull  
each end of the line sharply  
to unlock the line from the  
slots. Ensure both lines have  
disengaged the slots before  
proceeding. Continue to apply  
pressure to the spool and  
screw the spool (9) clockwise  
onto the spindle. Tighten the  
spool securely.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance and cleaning  
General inspection  
1. Store the tool, instruction manual and accessories in a  
secure, dry place. In this way you will always have the  
information ready to hand.  
Regularly check that all the fixing screws are tight. They  
may vibrate loose over time.  
Storage  
2. Keep the tool’s air vents unclogged and clean at all times.  
1. Store the trimmer away from direct sunlight.  
3. Remove dust and dirt regularly. Cleaning is best done  
with a rag.  
2. Do not store in a nylon bag as this can encourage the  
formation of mould.  
4. All bearings and bushes are lubricated for life.  
3. At the end of the season, give the trimmer an overall  
cleaning and a thorough check.  
5. If the cordset is damaged or worn, it must be replaced by  
the manufacturer, or service agent or a similarly qualified  
person in order to avoid a hazard.  
4. Do not leave the trimmer resting on the floor for extended  
periods as it could cause the shape of the guard to  
alter, posing a safety risk. Hang it off the floor by the top  
handgrip.  
6. Never use caustic agents to clean plastic parts.  
CAUTION. Do not use cleaning agents to clean the plastic  
parts of the tool. A mild detergent on a damp cloth is  
recommended. Water must never come into contact with  
the tool.  
Power cord maintenance  
If the supply cord needs replacing, the task must be carried  
out by the manufacturer, the manufacturer’s agent, or an  
authorised service centre in order to avoid a safety hazard.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GMC customer assist  
If your product needs repairing, replacing,  
technical service or you simply need help or advice,  
please contact us on our Customer Assist Line  
1300 880 001 (Australia) or 0800 445 721 (New Zealand).  
For prompt service we suggest you log your service request  
online at www.gmcservice.com.au. Should you not have  
access to the Internet, please contact our service department  
on 1300 880 001 (Australia) or 0800 445 721 (New Zealand).  
7am 7pm, 7days a week (AEST).  
Please note that if repair or replacement is required,  
you must provide a valid original purchase receipt.  
You will need the following details at hand to log your service request;  
Personal details: First & Last name, address, pick up address,  
contact phone numbers, email address  
Product details: Product number, date of purchase, retailer bought from,  
State & postcode, receipt number, reason for the request,  
copy of official purchase receipt  
Attach your purchase receipt and save with this Manual for future reference.  
Please refer to our website www.gmcompany.com for full GMC warranty Terms and Conditions.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Eizo Computer Monitor L565 User Manual
Elation Professional Stereo System EPV400 User Manual
Eton MP3 Player FR405 User Manual
Festool Router MFK 700 User Manual
FieldServer Computer Drive FS 8704 13 User Manual
Fisher Paykel Stove CG602 User Manual
Flymo Trimmer EHT 420 User Manual
Focal Car Amplifier Solid 4 User Manual
Fostex TV Cables VM200 User Manual
FujiFilm Digital Camera 40i User Manual