100W
1
2
6
SOLDERING
3
4
5
7
1. Soldering tip
2. Tip release screw
3. Light
4. Trigger
5. Rubber handle
6. Shaft
GUN
DEC006PSI
7. Cord protector
Full 2 years home use warranty
Description of symbols
Personal safety
Whilst every effort is made to ensure your complete satisfaction with
this tool, occasionally, due to the mass manufacturing techniques,
a tool may not live up to our required level of performance and you
may need the assistance of our service department.
The rating plate on your tool may show symbols. These represent
important information about the product or instructions on its use.
•
Stay alert, watch what you are doing and use common
sense when operating a power tool. Do not use a power
tool while you are tired or under the influence of drugs,
alcohol, or medication. A moment of inattention while
operating power tools may result in serious personal injury.
Read instruction manual.
This product is warranted for a 2-year period for home domestic
use from the date of the original purchase. If found to be defective
in materials or workmanship, the tool or the offending faulty
component will be replaced free of charge with another of the
same item. A small freight charge may apply.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
•
Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid safety
shoes, hard hat, or hearing protection use.
Double insulated for additional protection.
•
Avoid accidental starting. Ensure the switch is in the
off-position before plugging in. Carrying power tools with
your finger on the switch or plugging in power tools that
have the switch on invites accidents.
The warranty replacement unit is only made available by
returning the tool to the place of purchase with a confirmed
register receipt. Proof of purchase is essential. We reserve the
right to reject any claim where the purchase cannot be verified.
Conforms to relevant standards
for electromagnetic compatibility.
•
•
•
Remove any adjusting key or wrench before turning the
tool on. A wrench or a key that is left attached to a rotating
part of the power tool may result in personal injury.
Specifications
This warranty does not include damage or defects to the tool
caused by or resulting from abuse, accidents, alterations or
commercial or business use.
Input power:
Power supply:
Heat up time:
Cord length:
Tool weight:
100W
230-240Vac ~ 50 Hz
6 - 8 seconds (approximately)
1.4m
Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool in
unexpected situations.
It also does not cover any bonus accessories unless the tool
is a GMC Platinum Professional model.
Please ensure that you store your receipt in a safe place.
Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
0.7kg
Conditions apply to the above warranty.
If you need direction of what constitutes a free of charge warranty
claim, please review the guide given on the rear of the Receipt
Holder. An indication is given as to the types of claim that are
permissible, and those that are not.
Safety instructions
WARNING. Read and understand all instructions. Failure to follow
all instructions listed below may result in electric shock, fire and/or
serious injury. The term “power tool” in all of the warnings below
refers to your mains-operated (corded) power tool or battery-
operated (cordless) power tool.
•
If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these devices
can reduce dust-related hazards.
Dear customer
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Power tool use and care
Save these instructions
Work area
•
•
•
Do not force the power tool. Use the correct power tool
for your application. The correct power tool will do the job
better and safer at the rate for which it was designed.
Phone 1300 880 001 in Australia
or 0800 445 721 in New Zealand.
•
Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
Introduction
•
Do not operate power tools in explosive atmospheres,
such as in the presence of flammable liquids, gases,
or dust. Power tools create sparks which may ignite the
dust or fumes.
Your new GMC power tool will more than satisfy your expectations.
It has been manufactured under stringent GMC Quality
Standards to meet superior performance criteria.
Disconnect the plug from the power source before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
•
Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
You will find your new tool easy and safe to operate, and, with
proper care, it will give you many years of dependable service.
•
•
Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
Electrical safety
Caution
•
If cordset is damaged have it replaced by an authorised
service centre.
Carefully read through this entire Instruction Manual before
using your new GMC Power Tool. Take special care to heed
the Cautions and Warnings.
Maintain power tools. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that
may affect the power tool’s operation. If damaged, have the
power tool repaired before use. Many accidents are caused
by poorly maintained power tools.
•
Power tool plugs must match the outlet. Never modify the
plug in any way. Do not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
Your GMC power tool has many features that will make your job
faster and easier. Safety, performance, and dependability have
been given top priority in the development of this tool, making it
easy to maintain and operate.
•
Avoid body contact with earthed or grounded surfaces
such as pipes, radiators, ranges and refrigerators.
There is an increased risk of electric shock if your body
is earthed or grounded.
•
•
Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
Environmental protection
Recycle unwanted materials instead of disposing
of them as waste. All tools, hoses and packaging
should be sorted, taken to the local recycling centre
and disposed of in an environmentally safe way.
Use the power tool, accessories and tool bits etc., in
accordance with these instructions and in the manner
intended for the particular type of power tool, taking
into account the working conditions and the work to
be performed. Use of the power tool for operations different
from intended could result in a hazardous situation.
•
•
Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
Do not abuse the cord. Never use the cord for carrying,
pulling or unplugging the power tool. Keep cord away
from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
Service
•
Have your power tool serviced by a qualified repair
•
When operating a power tool outdoors, use an outdoor
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
personnel using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
•
When operating a power tool outdoors, use an outdoor
extension cord suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of electric shock.
Code: DEC006PSI
Date: 060223
Black
Edition: 4
Op: DCR
Download from Www.Somanuals.com. All Manuals Search And Download.
|
EverFocus Car Video System EN7519VGA User Manual
Excalibur electronic Games FX201 User Manual
Extron electronic Stereo System DMP 64 User Manual
Freecom Technologies Computer Drive Mobile Drive Secure User Manual
Fujitsu Server TX200FT S2 User Manual
GE Appliance Trim Kit GPS5CC User Manual
GE Monogram Oven ZGU48L6RDSS User Manual
Generac Power Systems Portable Generator 0595 0 User Manual
Giant Automobile Parts GP5136 5100 User Manual
Gigabyte Network Card GA 5EASV RH User Manual