INSTRUCTION MANUAL
• Melbourne • Perth • Auckland • Hong Kong • Shanghai
PEDG
• Taipei • New York • Verona • London • Paris
050603 ED10 JJ
Download from Www.Somanuals.com. All Manuals Search And Download.
Description of symbols
Dear Customer
The rating plate on your tool may show symbols. These
represent important information about the product or
instructions on its use.
If you require any help with your product, whether it
is a Warranty claim, spare part or user information,
please phone our Help Line for an immediate response.
Phone 1300 880 001 in Australia or 0800 445 721 in
New Zealand.
Wear hearing protection.
Wear eye protection.
Wear breathing protection.
Introduction
Conforms to relevant standards for
electromagnetic compatibility.
Your new GMC power tool will more than satisfy your
expectations. It has been manufactured under stringent
GMC Quality Standards to meet superior performance
criteria.
Warning.
You will find your new tool easy and safe to operate,
and, with proper care, it will give you many years of
dependable service.
Read these instructions for use carefully.
Choke control
Start position (choke closed).
CAUTION. Carefully read through this entire Instruction
Manual before using your new GMC Power Tool. Take
special care to heed the Cautions and Warnings.
Run position (choke open).
Your GMC power tool has many features that will make
your job faster and easier. Safety, performance, and
dependability have been given top priority in the
development of this tool, making it easy to maintain
and operate.
Use at a distance of at least 15m from
other people.
Thrown objects and rotating line can
cause severe injury.
Warning. Do not put hands or feet under the
Environmental protection
cover of the machine when it is running.
Recycle unwanted materials instead of
disposing of them as waste. All tools, hoses
and packaging should be sorted, taken to
the local recycling centre and disposed of
in an environmentally safe way.
Warning. Rotating blades.
Explosive material.
Extremely hot surface. Do not touch a hot
muffler, gear box or cylinder, you may get
burned. These parts get extremely hot from
operation and remain hot for a short time after
the unit is turned off.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Personal safety
Specifications
Engine:
Speed:
Depth of cut:
Size of blade:
Bore size:
• Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under the
influence of drugs, alcohol, or medication. A moment of
inattention while operating power tools may result
in serious personal injury.
26cc, 2 Stroke
0 - 2200min-1
10mm, 20mm, 30mm
180mm
18mm
• Use safety equipment. Always wear eye protection.
Safety equipment such as a dust mask, non-skid
safety shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
• Remove any adjusting key or wrench before turning
the tool on. A wrench or a key that is left attached
to a rotating part of the power tool may result in
personal injury.
• Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power tool
in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be
caught in moving parts.
fuel type:
Unleaded
Unleaded petrol / oil (40:1)
700ml
Fuel mixture:
Fuel tank capacity:
Equivalent Spark plugs:
NGK BM4A
CHAMPION CJ14
DENSO W14M-U10
BOSCH WS8E
Sound pressure value:
Weight:
119db(A)
7.5kg
Safety instructions
WARNING. Read and understand all instructions. Failure
to follow all instructions listed below may result in electric
shock, fire and/or serious injury. The term “power tool”
in all of the warnings below refers to your mains-operated
(corded) power tool or battery-operated (cordless)
power tool.
• If devices are provided for the connection of dust
extraction and collection facilities ensure that these
are connected and properly used. Use of these devices
can reduce dust-related hazards.
Save these instructions
Work area
Power tool use and care
• Keep work area clean and well lit. Cluttered and dark
• Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed.
• Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must
be repaired.
areas invite accidents.
• Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases, or dust. Power tools create sparks
which may ignite the dust or fumes.
• Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
• Blade fracture.
• Catapulting of blade pieces.
• Damage to hearing if effective earmuffs are not worn.
• Do not use blades that are deformed or cracked.
• Do not operate in a hazardous location. Such areas
include where there is a risk of explosion of petrol
fumes, leaking gas or explosive dust.
• Ensure the tool is switched off completely before
making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
•
Store idle power tools out of the reach of children and
do not allow persons unfamiliar with the power tool
or these instructions to operate the power tool. Power
tools are dangerous in the hands of untrained users.
• Do not operate in a confined area. Exhaust gases,
smoke or fumes could reach dangerous concentrations.
• Protect your tool. This edger is NOT WEATHERPROOF
and should not be exposed to direct sunlight, high
ambient temperature and damp, wet or high humidity
conditions.
• Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and any
other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired
before use. Many accidents are caused by poorly
maintained power tools.
• Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
• Use the power tool, accessories and tool bits etc.,
in accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Use of the power tool
for operations different from intended could result in a
hazardous situation.
• Do not smoke while refuelling. This is potentially dangerous
as it may ignite the fuel and cause an explosion.
• Take care not to spill fuel. When refuelling the edger
ensure that the motor has been switched off. Prevent
the spilling of fuel as this may also ignite with the hot
motor. Never refuel whilst the engine running.
• Be careful where you store the edger. Store the edger in
a dry area away from flammable liquids.
• Keep your distance. The edger emits exhaust fumes.
Ensure bystanders keep a safe distance.
• Ensure you use oil-mix fuel. Ensure that you mix 40
parts unleaded fuel to 1 part engine grade oil. If not,
the engine will overheat and cause damage to your
edger.
• Never fill fuel tank indoors. Never fill fuel tank when
engine is running or hot. Do not smoke when filling
fuel tank.
• When making any adjustments to the tool always wait
for the blade to come to a complete stop and turn off
the tool.
Service
• Have your power tool serviced by a qualified repair
personnel using only identical replacement parts.
This will ensure that the safety of the power tool
is maintained.
Additional safety rules for edgers
Even when the tool is used as prescribed it is not possible
to eliminate all residual risk factors. The following hazards
may arise in connection with the tool’s construction and
design:
• Never attempt to unclog the blade chamber by tapping
the tool on the ground, this can damage the unit.
• Contact with the blade.
• Kickback of the edger due to hidden solid objects.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
• Keep hands clear of edge guide and blade when
cleaning as these wear to a very sharp point during
edging.
• Use only blades as recommended.
• Do not attempt to free a jammed blade before first
switching off the machine.
• Before landscaping or trenching, inspect and ensure
there are no exposed or buried cables or pipes or other
objects that may create a hazard or interfere with
operating the edger.
• Let the blade come to rest naturally.
• Periodically check that all fixings are properly tightened.
Contents of carton
• Set depth to only that required for the job, do not
overload. If tool slows, pull back slightly and wait until
blade returns to normal speed.
The GMC edger is supplied with the following accessories
as standard:
• Blade spanner
• Check damaged parts before further use of the
appliance, a guard or other part that is damaged should
be carefully checked to determine that it will operate
properly and perform it’s intended function. Check for
alignment of moving parts, binding of moving parts,
mounting, and any other conditions that may affect it’s
operation.
• Large flange spanner
• Spark plug wrench
• Auxiliary handle
• Auxiliary handle locking knob
• Shaft height adjustment knob
• This instruction manual
• Ensure guards are kept in place.
• Always keep blade area clean.
Unpacking
Due to modern mass production techniques, it is unlikely
that your GMC Power Tool is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
• When using the edger, stones, pieces of metal and other
objects can be thrown out at high speed by the blade.
The tool and guard are designed to reduce the danger.
However, the following special precautions should be
taken:
• Wear safety glasses or other eye protection, gloves,
long pants and suitable footwear.
• Make sure that other people and pets are at least 5
metres away.
• Always stand to left side of main handle.
• Before landscaping or Trenching, check for buried
electrical cables.
• To reduce the risk of injury, work going away from
nearby solid objects such as walls, steps, stones,
trees etc. Use great care when working close to solid
objects, and where necessary, do edging or trimming
by hand.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Know your product
4
1.Lock off button
2.Throttle trigger
3. Ignition switch
4.Auxiliary handle
5.Shaft
1
2
8
6.Edger guide lever
7.Wheel
5
8.Auxiliary handle lock knob
9. Height adjustment knob
10. Guide wheel
11. Blade cut indicator
12. Fuel tank
13. Recoil starter
18
14. Primer bulb
15. Spark plug
16. Air filter cover
17. Choke lever
6
18. Shaft height adjustment knob
19. Air filter cover locking knob
15
16
19
12
11
7
13
7
17
10
9 14
Download from Www.Somanuals.com. All Manuals Search And Download.
4.Unscrew the fuel tank cap and pour the mixture into
the tank.
Assembly
Inserting the shaft
Remove the nut from the hole in the base of the edger
and insert the shaft. Replace the nut and retighten it.
4a
4b
Telescope handle adjustment
The shaft handle can be set at
three different heights.
To set the height for your
comfort, slide the tube up to
the level required using one of
the three holes provided and
insert the coach screw. Tighten
the shaft height assembly
adjustment knob (18).
5.Be careful not to spill any mixture. If this happens, wipe
the spill with a clean rag.
6.Start the engine at least three metres away from the
area where the fuel tank has been filled up in order to
avoid any risk of fire.
• Danger of fire and burn injury.
• Always use extreme care when handling fuel! Fuel is
highly flammable.
Attaching the auxiliary handle
To attach the auxiliary handle
fit it onto the slot on the main
handle.
• Never attempt to fuel the edger if the fuel system
components are damaged or are leaking.
• Never attempt the refuel the engine while it is running
or still warm, allow it to cool before fueling.
Adjust it to the most
comfortable position and insert
the auxiliary handle locking
knob (8), securing it firmly.
• Never smoke or light any fires near the edger
or fuels.
• Always transport and store fuels in an approved
container.
• Never place flammable material close the the
engine muffler.
Fueling
MOTOR FUEL: MIX AT 40:1 ONLY
1.Use fresh unleaded petrol. You must use 100% synthetic
oil specifically made for heavily stressed two-stroke
engines.
2.Mix the petrol and oil in an approved container.
Never mix fuel in the edger.
• Do not use petrol which contains ethanol or methanol
as it may damage the fuel lines and other engine parts.
3.Place the edger upright on the ground or on
a sturdy bench and wipe any debris from around the
fuel cap.
• Mix only enough fuel for your immediate needs. If fuel
must be stored longer than 30 days, it should first be
treated with a stabilizer or similar product.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Starting the edger
Choke control
Stopping the edger
Stop the engine by pressing the
off button (3) to the off position
marked 0.
4
Start position (choke closed).
Run position (choke open).
To start the engine, proceed as follows:
1. Move the ignition switch (3) to the on position marked
Running in the engine
1. During the first ten hours of work, run the engine at a
moderate RPM.
2.We advise you in any case not to maintain your engine
at a high speed as the different components must settle
with each other during the process of running in the
engine.
3.It is at the end of the running in period that the
engine will reach its maximum power.
with an I.
2.Press the primer bulb (14) 6
2
3
4
times until there are no air
bubbles visible in the fuel
discharge line.
Note. This is not necessary if
the engine is warm.
3.Push the choke lever (17)
up to the start position (the
choke is now closed).
4.After the first two hours of work, stop and make sure
that all nuts and screws are securely fastened, and
tighten them if necessary.
Note. Again this is not necessary
if the engine is warm.
Cutting depth
4. Pull the recoil starter(13)until
the engine sounds like it
wants to run.
5.Push the choke down to the
run position.
The cutting depth of the edger
can be altered to one of 3
settings 10mm, 20mm and
30mm.
1.To adjust the cutting depth,
loosen the Height adjustment
knob approx 5-6 full turns,
but do not remove.
2.Push the knob fully towards
the body of the edger and
at the same time move the
front wheel arm across to the
opposite side of the housing.
6.Pull the recoil starter rapidly
until the engine starts.
2
7.Allow the engine to run for 10
seconds to let it warm up.
8.To increase the engine speed
depress the Lock Off button
(1) on the side of the handle
and squeeze the throttle
trigger(2).
3.Raise or lower the arm to the
desired position, and then
pull the height adjusting knob
3
9
Download from Www.Somanuals.com. All Manuals Search And Download.
outwards. Rotate the knob in a clockwise direction until
all of the slack is taken out of assembly.
4.Check to ensure the front wheel arm has located into
one of the pre allocated positions and the head of the
bolt securing the front wheel arm is sitting flat on the
surface of the wheel arm. Firmly tighten the height
adjustment knob.
3.The guard is fitted with a
raised rib section which acts
as a blade cut indicator (11).
This rib will assist in guiding
the operator where the blade
will cut. During operation the
operator can sight down the
rib of the guard to where the
edge is to be cut.
3
Edge guide
The edge guide is used when edging is required against
a solid material like a paved surface. It is important to
ensure the edge guide is used in these conditions as
the edge guide will assist in preventing the blade from
making direct contact with the paved surface.
To use the edge guide, hold the
edge guide control knob (6)
and move the knob sideways
toward the centre of the edger
and then push downwards,
ensuring that the guide fits into
the allocated slot.
The edge guide control knob
should be returned to the
upright position to lock the
guide in the down position.
To release the edge guide, hold
the edge guide control knob
and move the knob sideways
toward the centre of the edger
and then pull upwards to lift
the guide.
4.Before starting the edger, line up the tool so the edge
guide rests against the edge of the paved surface,
both rear wheels should be on the paved surface when
edging.
Hint: When there is heavy overgrowth of grass over the
paved surface it may drag on the guard. An initial cut
may be required with the edger on the grass side. This
will require lifting up the edger guide and may require
reducing the depth of cut.
5.To avoid kickback of edger,
tilt the handle down so the
blade is above the ground.
5
6.When starting to edge, run
the engine at full throttle
and lower the blade gently
into the ground, being careful
not to hit concrete with the
blade.
7.Slowly lift the handle to lower the blade, finding the
edge of the paved surface and start edging. Then
move tool forward slowly along edge of paved surface,
keeping the edge guide pressed lightly against the
pavement edge.
Edging
For the first edging each season, it’s best to move forward
slowly because grass is thickest then. Subsequent edging
will be completed more rapidly. If the tool slows down,
back it up slightly until the blade returns to normal speed.
During edging some sparks may be generated from hitting
stones, this is normal.
1.Before edging check the area and remove all obstacles
and objects that could be thrown.
2.Set the cut depth at 20mm and set edge guide to the
down position. Blade depth may have to be adjusted to
differences in height between hard surfaces and the top
of the grass.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Ensure the assembly is correct
and the blade is correctly
orientated by checking the
diagram below.
With the spanner fitted to the
outer flange, fit the locking
nut and tighten with the blade
spanner in a clockwise direction.
After the blade is secure, rotate
the blade by hand to ensure the
blade is not making contact with
any components of the edger.
Blade wear is expected
whenever you use your edger.
Blades wear quite quickly
when edging along concrete
paths. This does not effect the
efficiency of the edger and is
expected due to the aggressive abrasion of concrete
on steel.
Edger blades are not a warranty item! Edger blades are
available from your local Hardware store.
Warning. The unit may become very hot during use.
Avoid contact during and immediately after operation.
Landscaping / trenching
Before landscaping or trenching, inspect and ensure there
are no exposed or buried cables or pipes or other objects
that may create a hazard or interfere with operating the
edger. Lift the edge guide lever (6) for all trenching. Set
depth to only that required for the job, do not overload,
if tool slows, pull back slightly and wait until the blade
returns to normal speed.
Changing the Blade
Position the edger on its side with the Blade uppermost.
Ensure the surface you are working on is clean and
foreign particles (stones etc) cannot enter the air intake
slots of the motor housing.
Place the large flange spanner
over the outer blade flange.
Fit the blade spanner over
the blade lock nut and while
holding firmly the spanner on
the blade flange, rotate the
locking nut in an anti-clockwise
direction.
Remove the lock nut completely
along with the outer flange and
blade.
There is no need to remove the
inner flange although on re
assembly the area of the inner
flange must be free of foreign
particles of dirt etc.
Maintenance
WARNING. The engine of the petrol edger must be at
a complete stop during assembling, repair and cleaning
operations that could be necessary.
Air filter
Accumulated dust in the air filter will reduce engine
efficiency. Increase fuel consumption and allow abrasive
particles to pass into the engine. Remove the air filter as
often as necessary to maintain a clean condition.
To re assemble with the a new
blade fit the inner flange on to
the spindle, fit the replacement
blade and secure the outer
flange on to the spindle and blade.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
• Remove air filter cover (16)
by turning the air filter locking
knob (19) anti-clockwise and
removing the cover as you do
carefully remove the Air intake
tube so that you can access
the filter.
• Light surface dust can readily
be removed by tapping the filter.
• Heavy deposits should be washed out in suitable
detergent and the filter dried fully before re-installing.
Checking the spark plug
Check the spark plug every 10-15 hours of use.
1.Remove the spark plug cover.
2.Use the spark plug wrench to remove the spark plug, by
turning it anti clockwise.
Storage and maintenance after use
• When you finish working, clean the petrol edger
completely, making sure there is no grass or dirt
wrapped in the cutting tools, and put it back into its
package in order to avoid its hurting you or other people
during transport.
• Be aware to not hit or cut the fuel tank if you put it
onto the ground.
• Store the petrol edger away from direct sunlight.
• Do not store in a nylon bag as this can encourage the
formation of mould.
• At the end of the season, give the petrol edger an
overall cleaning and a thorough check.
Whenever the machine is not used for a long period of
time, proceed as follows:
• Empty the fuel tank completely.
• Protect all metal engine parts from corrosion by coating
them with oil.
1
2
• Remove the spark plug, put a few drops of oil into the
cylinder and then pull the recoil starter 2 to 3 times in
order to distribute the oil evenly. Replace the spark plug.
Problems
Power loss or sudden stopping of the engine
• Check whether the fuel tank is empty.
• The mixture does not reach the carburettor. Clean the
fuel filter in the fuel tank.
• There is water in the mixture. Drain and rinse all the
fuel system.
• The air filter is dirty. Clean the air filter.
• There are carbon deposits in the cylinder exhaust pipe or
the muffler. Clean those or change the muffler.
Bad quality cut
• Overloaded cutting due to grass too thick for engine
power.
• Wrapped vegetal material on the cutting tool.
3.Clean and adjust the spark
plug gap to 0.6 - 0.7mm.
Replace any damaged
or visibly worn plug with
a worn plug with an
equivalent spark plug, including NGK BM4A, CHAMPION
CJ14, DENSO W14M-U10, BOSCH WS8E.
4.Install the spark plug finger tight in the cylinder head,
then tighten it firmly with the spark plug wrench.
Servicing
• It is recommended once you first use your petrol edger
to get it serviced after 15 hours of use.
• From thereafter, service the petrol edger every 2 years.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Carefully read the entire Instruction Manual
before using this product.
With continuing product development changes may
have occurred which render the product received
slightly different to that shown in this instruction
manual. The manufacturer reserves the right to
Before returning this product for a
Warranty Claim or any other reason
Please Call 1300 880 001 (Australia)
or 0800 445 721 (New Zealand)
change specifications without notice. Note:
Specifications may differ from country to country.
When you make your call, please have
the following information at hand:
• GMC Product Type • GMC Product Code
A GMC Service Engineer will take your call and, in
most cases, will be able to solve your problem over
the phone.
The GMC 777 Helpline operates from 7am to
7pm, 7 days a week (EST). This allows you
to contact GMC directly with any queries and
technical questions you have regarding
our products.
You are welcome to use this phone-in service to
make suggestions or give comments about any
GMC product.
45–55 South Centre Road
Melbourne Airport
Victoria, Australia 3045
Tel: (03) 8346 1100 Fax: (03) 8346 1200
Save this Manual for future reference.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
|