Global Machinery Company Cordless Saw DC18V User Manual

18V  
ATING HANDLE  
ECIPROCATING SAW  
DC18V  
INSTRUCTION MANUAL  
Code: DC18V  
Date: 060320  
Black  
Cyan  
Magenta  
Yellow  
Edition: 04  
Op: DCR  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dear Customer  
Description of symbols  
The rating plate on your tool may show symbols. These  
represent important information about the product or  
instructions on its use.  
If you require any help with your product, whether it is a  
Warranty claim, spare part or user information:  
Please phone our Help Line for an immediate response. The  
appropriate number is given on the rear page of this manual.  
Wear hearing protection.  
Wear eye protection.  
Wear breathing protection.  
Introduction  
Your new GMC power tool will more than satisfy your  
expectations. It has been manufactured under stringent  
GMC Quality Standards to meet superior performance  
criteria.  
Double insulated  
for additional protection.  
Conforms to relevant standards for  
electromagnetic compatibility.  
You will find your new tool easy and safe to operate, and,  
with proper care, it will give you many years of dependable  
service.  
Specifications  
Voltage:  
230–240 Vac ~ 50 Hz  
CAUTION. Carefully read through this entire Instruction  
Manual before using your new GMC Power Tool. Take  
special care to heed the Cautions and Warnings.  
Nominal battery voltage: 18V  
Strokes per minute:  
Batteries:  
Charging Time:  
Blade stroke:  
Weight:  
0–2700 SPM  
2 x 1.2Ah  
1 Hour  
22mm  
Your GMC power tool has many features that will make you  
job faster and easier. Safety performance and dependability  
have been given top priority to the development of this tool,  
making it easy to maintain and operate.  
3.6kg  
Environmental protection  
Common blade types (blades not supplied):  
Recycle unwanted materials instead of  
disposing of them as waste. All tools, hoses  
and packaging should be sorted, taken to the  
local recycling centre and disposed of in an  
environmentally safe way.  
150mm long, 6 TPI  
For fast smooth cuts in woods,  
masonite, plastics, hard composite  
board and all plunge cutting.  
Keyhole blade shape permits  
cutting in hard to reach places.  
230mm long, 6 TPI  
For fast, smooth, deep cuts  
through thick wood, plastic,  
composition board and hardboard.  
300mm long, 6 TPI  
100mm long, 24 TPI  
For rough cuts in wood.  
High speed steel blade for cutting  
ferrous materials.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. Personal safety  
General safety rules  
a. Stay alert, watch what you are doing and use  
common sense when operating a power tool. Do  
not use a power tool while you are tired or under the  
influence of drugs, alcohol or medication. A moment of  
inattention while operating power tools may result in  
serious personal injury.  
WARNING Read all instructions. Failure to follow all  
instructions listed below may result in electric shock, fire and/  
or serious injury. The term “power tool” in all of the warnings  
listed below refers to your mains operated (corded) power  
tool or battery operated (cordless) power tool.  
Save these instructions.  
1. Work area  
b. Use safety equipment. Always wear eye protection.  
Safety equipment such as dust mask, non-skid  
safety shoes, hard hat, or hearing protection used for  
appropriate conditions will reduce personal injuries.  
a. Keep work area clean and well lit. Cluttered and dark  
areas invite accidents.  
b. Do not operate power tools in explosive  
atmospheres, such as in the presence of flammable  
liquids, gases or dust. Power tools create sparks which  
may ignite the dust or fumes.  
c. Avoid accidental starting. Ensure the switch is in the  
off position before plugging in. Carrying power tools with  
your finger on the switch or plugging in power tools that  
have the switch on invites accidents.  
c. Keep children and bystanders away while operating  
a power tool. Distractions can cause you to lose control.  
d. Remove any adjusting key or wrench before  
turning the power tool on. A wrench or a key left  
attached to a rotating part of the power tool may result in  
personal injury.  
2. Electrical safety  
a. Power tool plugs must match the outlet. Never modify  
the plug in any way. Do not use any adapter plugs with  
earthed (grounded) power tools. Unmodified plugs and  
matching outlets will reduce risk of electric shock.  
e. Do not overreach. Keep proper footing and balance at  
all times. This enables better control of the power tool in  
unexpected situations.  
b. Avoid body contact with earthed or grounded  
surfaces such as pipes, radiators, ranges and  
refrigerators. There is an increased risk of electric shock  
if your body is earthed or grounded.  
f. Dress properly. Do not wear loose clothing or  
jewellery. Keep your hair, clothing and gloves away from  
moving parts. Loose clothes, jewellery or long hair can  
be caught in moving parts.  
c. Do not expose power tools to rain or wet conditions.  
Water entering a power tool will increase the risk of  
electric shock.  
g. If devices are provided for the connection of dust  
extraction and collection facilities, ensure these are  
connected and properly used. Use of these devices  
can reduce dust related hazards.  
d. Do not abuse the cord. Never use the cord for  
carrying, pulling or unplugging the power tool.  
Keep cord away from heat, oil, sharp edges or moving  
parts. Damaged or entangled cords increase the risk of  
electric shock.  
4. Power tool use and care  
a. Do not force the power tool. Use the correct power tool  
for your application. The correct power tool will do the job  
better and safer at the rate for which it was designed.  
e. When operating a power tool outdoors, use an  
extension cord suitable for outdoor use. Use of a cord  
suitable for outdoor use reduces the risk of electric  
shock.  
b. Do not use the power tool if the switch does not turn  
it on and off. Any power tool that cannot be controlled  
with the switch is dangerous and must be repaired.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
c. Disconnect the plug from the power source before  
making any adjustments, changing accessories, or  
storing power tools. Such preventive safety measures  
reduce the risk of starting the power tool accidentally.  
d. When battery pack is not in use, keep it away from  
other metal objects like paper clips, coins, keys,  
nails, screws, or other small metal objects that can  
make a connection from one terminal to another.  
Shorting the battery terminals together may cause burns  
or a fire.  
d. Store idle power tools out of the reach of children  
and do not allow persons unfamiliar with the power  
tool or these instructions to operate the power tool.  
Power tools are dangerous in the hands of untrained  
users.  
e. Under abusive conditions, liquid may be ejected  
from the battery; avoid contact. If contact accidentally  
occurs, flush with water. If liquid contacts eyes,  
additionally seek medical help. Liquid ejected from the  
battery may cause irritation or burns.  
e. Maintain power tools. Check for misalignment or  
binding of moving parts, breakage of parts and  
any other condition that may affect the power tools  
operation. If damaged, have the power tool repaired  
before use. Many accidents are caused by poorly  
maintained power tools.  
6. Service  
a. Have your power tool serviced by a qualified repair  
person using only identical replacement parts. This  
will ensure that the safety of the power tool is maintained.  
f. Keep cutting tools sharp and clean. Properly  
maintained cutting tools with sharp cutting edges are less  
likely to bind and are easier to control.  
Additional safety rules for reciprocating saws  
Always remove the plug from the mains socket before  
making any adjustments or maintenance, including  
changing the blade.  
When operating the saw, use safety equipment including  
safety goggles or shield, ear protection, dust mask and  
protective clothing including safety gloves.  
Ensure that the lighting is adequate.  
Keep the area free of tripping hazards.  
Do not let anyone under the age of 18 years operate  
this saw.  
Always stand to one side when operating the saw.  
Never use a cracked or distorted saw blade. Only use  
sharp blades.  
When cutting round wood, use clamps that prevent the  
work piece from turning on both sides of the blade.  
Never use your hands to remove sawdust, chips or waste  
close by the blade.  
g. Use the power tool, accessories and tool bits etc.,  
in accordance with these instructions and in the  
manner intended for the particular type of power  
tool, taking into account the working conditions and  
the work to be performed. Use of the power tool for  
operations different from those intended could result in a  
hazardous situation.  
5. Battery tool use and care  
a. Ensure the switch is in the off position before  
inserting battery pack. Inserting the battery pack into  
power tools that have the switch on invites accidents.  
b. Recharge only with the charger specified by the  
manufacturer. A charger that is suitable for one type  
of battery pack may create a risk of fire when used with  
another battery pack.  
c. Use power tools only with specifically designated  
battery packs. Use of any other battery packs may  
create a risk of injury and fire.  
Use only blades as recommended.  
Rags, cloths, cord and string and the like should never be  
left around the work area.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Avoid cutting nails. Inspect the work piece and remove all  
nails and other foreign objects before beginning sawing.  
Support the work properly.  
When an extension cable is required, you must ensure  
that it has the right ampere rating for your power tool and  
is in safe electrical condition.  
After long working periods external metal parts and  
accessories could be hot.  
Do not force the saw; let the tool do the work at a  
reasonable speed. Overloading will occur if too much  
pressure is applied and the motor slows resulting in  
inefficient cutting and possible damage to the motor.  
Always remove the plug from the mains socket before  
making any adjustments or maintenance, including  
changing the blade.  
WARNINGS. Before connecting a tool to a power source  
(mains switch power point receptacle, outlet, etc.) be sure  
that the voltage supply is the same as that specified on the  
nameplate of the tool. A power source with a voltage greater  
than that specified for the tool can result in serious injury to  
the user, as well as damage to the tool.  
Never reach over the blade to remove waste or off cuts.  
Do not attempt to free a jammed blade before first  
switching off the machine.  
Do not slow or stop a blade with a piece of wood. Let the  
blade come to rest naturally.  
If you are interrupted when operating the saw, complete  
the process and switch off before looking up.  
Periodically check that all nuts, bolts and other fixings are  
properly tightened.  
Always hold the saw on parts that are insulated. If you  
accidentally cut into hidden wiring or the saw’s own cable,  
the metal parts of the saw will become “live”.  
Never saw near combustible liquids or gases.  
The tool must be used only for its prescribed purpose.  
Any use other than those mentioned in this Manual will  
be considered a case of misuse. The user and not the  
manufacturer shall be liable for any damage or injury  
resulting from such cases of misuse.  
If in doubt, do not plug in the tool. Using a power source  
with a voltage less than the nameplate rating is harmful to  
the motor.  
Wear goggles  
The manufacturer shall not be liable for any changes made  
to the tool nor for any damage resulting from such changes.  
Wear earmuffs  
Wear a breathing mask  
Even when the tool is used as prescribed it is not possible to  
eliminate all residual risk factors. The following hazards may  
arise in connection with the tool’s construction and design:  
Additional safety rules for the charger  
Before using the charger, read all the instructions and  
cautionary markings on the charger and battery pack as  
well as the instructions on using the battery pack.  
Contact with the blade.  
Kickback of work piece and parts of work piece.  
Blade fracture.  
Only charge your batteries indoors as the charger is  
designed for indoor use only.  
Catapulting of blade pieces.  
Damage to hearing if effective earmuffs are not worn.  
Harmful emissions of sawdust when the machine is  
used in closed rooms. Always use supplementary dust  
extraction where possible.  
DANGER. If the battery pack is cracked or damaged in  
any other way, do not insert it in the charger. There is a  
danger of electric shock or electrocution.  
WARNING. Do not allow any liquid to come into contact  
with the charger. There is a danger of electric shock.  
Do not use blades that are deformed or cracked.  
Fully unwind cable drum extensions to avoid  
potential overheating.  
To allow the battery pack to cool down after charging, do  
not place it in a hot environment such as a metal shed or  
open trailer left in the sun.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recharge only with the charger specified by the  
manufacturer. A charger that is suitable for one type of  
battery pack may create a risk of fire when used with  
another battery pack.  
The charger is designed for use from a standard  
household electrical supply (230–240 volts). Do not  
attempt to connect the charger to a supply with a different  
supply.  
The charger and battery packs supplied with it are  
specifically designed to work together. Do not attempt to  
charge the battery pack with any other charger than the  
one supplied.  
If you wish to charge a second battery pack, unplug the  
charger from the mains supply and leave it for at least  
15 minutes. After this time you can charge a second  
battery pack.  
Do not place any object on top of the charger as it could  
cause overheating. Do not place the charger near any  
heat source.  
Additional safety rules for the battery pack  
The battery pack for this tool has been shipped in a low  
charge condition. You should charge the battery pack fully  
before use.  
Ensure the switch is in the off position before inserting  
battery pack. Inserting the battery pack into power tools  
that have the switch on invites accidents.  
Do not pull on the lead of the charger to disconnect it  
from the power source.  
Make sure that the charger cable is positioned where  
it will not be stepped on, tripped over or otherwise  
subjected to damage or stress.  
Use power tools only with specifically designated battery  
packs. Use of any other battery packs may create a risk  
of injury and fire.  
Do not use an extension cord unless it is absolutely  
necessary. The use of an improper extension cord could  
cause the risk of fire, electric shock or electrocution.  
To ensure the longest battery life and best battery  
performance, always charge the battery when the air  
temperature is between 18–24°C. Do not charge the  
battery pack when the temperature is below 0°C,  
or above 40°C. This is important. Failure to observe  
this safety rule could cause serious damage to the  
battery pack.  
Do not use the charger if it has been subjected to a  
heavy knock, dropped or otherwise damaged in any way.  
Take the charger to an authorised service centre for a  
check or repair.  
Do not disassemble the charger. Take it to an authorised  
service centre when service or repair is required.  
Incorrect re-assembly may result in the risk of fire, electric  
shock or electrocution.  
When battery pack is not in use keep it away from other  
metal objects like paper clips, coins, keys, nails, screws  
or other small metal objects that can make a connection  
from one terminal to another. Shorting the battery  
terminals together may cause burns or a fire.  
To reduce the risk of an electric shock, unplug the  
charger from the power supply before attempting to clean  
it. Removing the battery alone does not reduce the risk.  
Do not incinerate the battery pack even if it is seriously  
damaged or can no longer hold a charge. The battery  
pack can explode in a fire.  
Never attempt to connect two chargers together.  
Do not store or use the tool and battery pack in locations  
where the temperature may reach or exceed 104°F  
(40°C) such as alongside sheds or metal structures in  
the summer.  
Never attempt to open the battery pack for any reason.  
If the plastic housing of the battery pack breaks open  
or cracks, immediately discontinue its use and do not  
recharge it.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Under abusive conditions, liquid may be ejected from  
the battery; avoid contact. If contact accidentally occurs,  
flush with water. If liquid contacts eyes, additionally seek  
medical help. Liquid ejected from the battery may cause  
irritation or burns.  
The battery pack utilizes nickel-cadmium cells.  
Cadmium is considered to be a toxic material. Use  
an environmentally safe disposal unit at a municipal  
waste disposal centre to dispose of a damaged or worn  
out battery.  
Contents of carton  
The GMC DC18V Reciprocating Saw is supplied with the  
following accessories as standard:  
2 x 18V Battery packs  
Battery charger  
3 x Blades - Wood cutting blade  
- Demolition blade  
- Metal cutting blade  
Unpacking  
Due to modern mass production techniques, it is unlikely  
that your GMC Power Tool is faulty or that a part is missing.  
If you find anything wrong, do not operate the tool until the  
parts have been replaced or the fault has been rectified.  
Failure to do so could result in serious personal injury.  
Assembly  
The GMC DC18V Reciprocating Saw is packed, fully  
assembled except for the blade.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Know your product  
1. Variable speed trigger switch  
2. Pendulum control  
3. Lock-off button  
4. Tool-free blade clamp  
5. Pivoting shoe  
7. Blade clamp lever  
8. Rotating rear handle  
9. Rotating release switch  
10. Battery pack  
9
1
3
8
11. Charger  
6. Saw blade  
2
7
4
6
5
11  
10  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
3. The red light on the charger  
(b) should begin to glow  
continuously, indicating that  
the battery pack is receiving  
a “Fast Charge”.  
Fitting and removing  
the battery pack  
CAUTION. Always switch off  
the tool before inserting or  
removing a battery pack.  
1. To remove the battery pack  
(10), press the tabs on each  
side and withdraw the pack  
from the tool.  
4. After approximately one hour,  
the “Fast Charge” indicator  
light (red) should go out and  
the green light should be lit,  
indicating that the battery  
pack is fully charged.  
2. To insert the pack, align the  
tongue on the pack with the  
groove in the housing and  
push it into the tool.  
NOTE. It is necessary to  
depress both battery pack  
release buttons in order to  
remove the battery pack from  
the charger.  
3. Make sure that it “clicks” into  
its final position so that it is  
safely locked in place.  
Depending on room  
temperature, line voltage, and  
existing charge level, the initial battery charging may take  
longer than one hour.  
Battery charging  
The battery pack for this tool has been shipped in a low  
charge condition. You should charge the battery pack fully  
before use.  
Disconnect the charger from the power source when it is  
not in use.  
WARNING. Do not use an extension cord.  
To obtain the best life for the battery  
Never allow the tool to come to a complete standstill before  
recharging.  
The battery should be placed on charge whenever the  
battery is noticeably running down or the tool no longer  
performs a task it previously performed.  
WARNING. Do not throw used batteries into a fire or  
water: it could cause an explosion!  
1. Before inserting into or removing the battery pack (10)  
from the charger (11) always ensure that the plug is not  
in the mains socket.  
2. Slide the battery onto the charger with the rails of the  
battery pack (d) aligned with the rails of the charger (e).  
Slide the battery down until it “clicks” into position.  
Avoid conducting short charges. Make sure that the battery  
is fully charged every time by allowing the charger to  
complete its full charging cycle.  
d
Avoid allowing lose items like screws or nails etc. to be  
stored with battery packs as these or similar items can short  
battery packs and cause a fire or explosion.  
Always unplug the charger when not in use and store in a  
dry secure place.  
Avoid charging or storing your battery in temperatures  
below 0º C and above 40º C.  
e
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
WARNING. Never leave a battery on charge once it starts  
to warm up. Never leave the battery pack on charge for  
more than 3 hours after the green LED lights.  
Switching on and off  
1. Attach the battery pack (10).  
2. To start the saw, press  
the lock-off button (3) and  
squeeze the trigger switch (1).  
There is no need to keep the  
lock-off button depressed  
once the saw has started.  
However, if the trigger switch  
is released, the lock-off  
button will re-engage as a  
safety precaution to prevent  
accidental operation.  
3. In order to restart the saw, both the lock-off button and the  
trigger switch must be pressed again.  
If you wish to charge a second battery pack, pull out the plug  
from the mains supply and keep it disconnected for at least  
15 minutes before attempting to charge the second battery.  
WARNING. Never store the battery out of the tool as the  
contacts are exposed and could be shorted by a metal  
object and cause a fire or explosion!  
Installing a saw blade  
CAUTION. Always ensure that  
the saw is switched off and  
the battery is removed before  
making any adjustments.  
Wear work gloves when  
replacing a blade.  
Varying the speed  
The more pressure you apply to the trigger switch, the  
higher the speed you will achieve. Vary the speed to suit  
the blade and the material being cut.  
1. Loosen the blade clamp (4)  
by depressing the clamp  
lever (7). This will allow the  
saw blade to be inserted.  
2. Whilst holding the blade  
clamp open, line up and  
insert the new saw blade.  
3. Let go of the blade clamp  
lever to lock the saw blade  
in position.  
4. Pull on the blade to ensure it  
is securely fastened.  
Changing the position of the shoe  
Where possible, rest the  
shoe on the material being  
cut. Change the angle of the  
shoe to suit the shape of the  
material.  
CAUTION. Do not operate  
the reciprocating saw if the  
adjustable shoe is damaged or  
not installed.  
WARNING. Make sure that  
the blade is securely fastened  
before starting the saw.  
Failure to do so may result in  
serious injury.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the pendulum control  
Rotating the rear handle  
1. With the pendulum control  
1. The rear handle (8) can  
be rotated, there are eight  
set positions of operation,  
spaced 45° apart.  
(2) set at  
the blade  
moves backwards and  
forwards only and does  
not swing up and down as  
well. This is called “straight  
cutting”. Use straight cutting  
when sawing hard materials  
such as metal.  
2. The rear handle must be  
“locked” into one of the eight  
preset positions. It must not  
be used at any position in  
between these eight preset  
positions as it might rotate  
during use and create a hazard.  
Straight Cutting  
2. With the pendulum control  
(2) set at  
the blade  
swings up and down as well  
as moving backwards and  
forwards. This “pendulum  
action cutting” is very  
efficient when cutting softer  
materials. It provides a more  
aggressive and faster cut.  
3. To rotate the handle press on  
the rotating release switch  
(9) and move the handle to  
one of the present positions.  
General cutting  
1. Hold the saw firmly in front  
and clearly away from you.  
Pendulum Cutting  
NOTE. Pendulum action cutting can leave a rough finish.  
2. Make sure that the blade is  
clear of any obstruction and  
that the power cord or any  
extension cord is out of the  
path of the blade.  
Use a file or rasp to clean up the cut edge if necessary.  
WARNING. Use the straight cutting mode when you wish  
to make curved or clean cuts, even when working with  
soft materials.  
3. Ensure that the material to  
be cut is held firmly. Small  
work pieces should be held  
in a vice or clamped to the workbench.  
4. Mark out the cutting line.  
5. Press the lock-off button and squeeze the trigger.  
6. Wait until the saw has reached maximum speed.  
7. Place the shoe on the work piece and begin sawing.  
NOTE. Use only enough pressure to keep the saw cutting.  
Do not force the cutting; allow the blade and the saw to do  
the work.  
WARNING. Use of excessive pressure that causes bending  
or twisting of the blade may cause the blade to break.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Plunge cutting  
1. Mark the line of the cut.  
Cleaning  
1. Keep the tool’s air vents unclogged and clean at all  
times.  
2. Choose a point inside the  
area to be cut out and place  
the tip of the blade over that  
point.  
2. Remove dust and dirt regularly. Cleaning is best done  
with a rag.  
3. Re-lubricate all moving parts at regular intervals.  
4. Never use caustic agents to clean plastic parts.  
3. Rest the front edge of the  
shoe on the work piece  
and hold the saw firmly in  
position.  
CAUTION. Do not use cleaning agents to clean the plastic  
parts of the saw. A mild detergent on a damp cloth is  
recommended. Water must never come into contact with  
the saw.  
4. Press the lock-off button and squeeze the trigger to start  
the cutting action.  
General inspection  
Regularly check that all the fixing screws are tight.  
They may vibrate loose over time.  
WARNING. Make sure that the blade does not touch the  
work piece until the blade has reached maximum speed  
since this could cause loss of control and serious injury.  
Metal cutting  
Repairs  
Metals such as sheet steel,  
pipe, steel rods, aluminium,  
brass and copper can be cut  
with your saw. Be careful not to  
bend or twist the blade and do  
not force the cutting action.  
Only an authorised service centre should replace the  
cordset or carry out other repairs. If the cordset is damaged  
or worn, have it repaired or replaced by an authorised  
service centre.  
We recommend that you use  
cutting oil to lubricate the cut  
when sawing soft metals and  
steel. It keeps the blade cooler  
and prolongs blade life.  
CAUTION. Clamp the work firmly and cut close to the  
clamping point to minimise vibration. When cutting conduit  
pipe or angle iron, clamp the work in a vice if possible and  
cut close to the vice. To cut thin sheet metal, sandwich  
the sheet between hardboard or plywood and clamp the  
layers to prevent vibration and the tearing of the metal.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Carefully read the entire Instruction Manual  
before using this product.  
Before returning this product for a Warranty Claim or any other reason  
Please Call 1300 880 001 (Australia) or 0800 445 721 (New Zealand)  
When you make your call, please have the following information at hand:  
GMC Product Type  
GMC Product Code  
A GMC Service Engineer will take your call and, in most cases, will be able to solve your problem over the phone.  
You are welcome to use this phone-in service to make suggestions or give comments about any GMC product.  
With continuing product development changes may have occurred which render the product received slightly  
different to that shown in this instruction manual.  
The manufacturer reserves the right to change specifications without notice.  
Note: Specifications may differ from country to country.  
Helpline 1300 880 001 (Australia) or 0800 445 721 (New Zealand)  
and enter your receipt details.  
The GMC 777 Helpline operates from 7am to 7pm, 7 days a week (EST).  
This allows you to contact GMC directly with any queries  
and technical questions you have regarding products.  
Save this Manual for future reference  
GMC Head Office:  
45-55 South Centre Road, Melbourne Airport, Victoria, Australia 3045  
Telephone (03) 8346 1100 Fax (03) 8346 1200  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Dynex Switch DX HUB23 User Manual
Electro Voice Microphone N D70 User Manual
Electro Voice Portable Speaker Sentry 100EL User Manual
Fishman Music Pedal SBT C User Manual
Fostex Recording Equipment LR16 User Manual
Frigidaire Dishwasher FGHD2455LB User Manual
Fujitsu Air Conditioner AOU12RLS User Manual
Fujitsu Printer FTP 622MCL301 User Manual
GE Car Stereo System JGP328WEK User Manual
GE Microwave Oven ZSC2000CBB User Manual