|
GA-K8NS Ultra-939
AMD Socket 939 Processor Motherboard
User's Manual
Rev. 1002
12ME-K8NSU939-1002
Copyright
© 2004 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGYCO., LTD.("GBT"). No part of this manual may be reproduced or transmitted in any from
without the expressed, written permission of GBT.
Trademarks
Third-party brands and names are the property of their respective owners.
Notice
Please do not remove any labels on motherboard, this may void the warranty of this motherboard.
Due to rapid change in technology, some of the specifications might be out of date before publication of this booklet.
The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a
commitment to update the information contained herein.
Download from Www.Somanuals.com. All Manuals Search And Download.
Motherboard
GA-K8NSUltra-939
Oct. 7, 2004
Download from Www.Somanuals.com. All Manuals Search And Download.
Read Me First!
When you installingAGP card, please make sure the following notice is fully understood and
practiced. If your AGP card has "AGP 4X/8X (1.5V) notch" (show below), please make sure
your AGP card is AGP 4X/8X.
AGP 4X/8X notch
TM
Caution: AGP 2X card is not supported by nVIDIA® nForce3 Ultra. You might
experience system unable to boot up normally. Please insert an AGP 4X/8X card.
GA-K8NS Ultra-939 Motherboard
- 4 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Prepare your computer...
Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To
protect them against damage from static electricity, you should follow some precautions whenever you
work on your computer.
1. Unplug your computer when working on the inside.
2. Use a grounded wrist strap before handling computer components. If you do not have one,
touch both of your hands to a safely grounded object or to a metal object, such as the power
supply case.
3. Hold components by the edges and try not touch the IC chips, leads or connectors, or other
components.
4. Place components on a grounded antistatic pad or on the bag that came with the components
whenever the components are separated from the system.
5. Ensure that theATX power supply is switched off before you plug in or remove theATX power
connector on the motherboard.
Installing the motherboard to the chassis...
If the motherboard has mounting holes, but they don't line up with the holes on the base and there
are no slots to attach the spacers, do not become alarmed you can still attach the spacers to the
mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, so
be careful of your hands). In this way you can still attach the motherboard to the base without worrying
about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the
motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the
screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it
may damage the board or cause board malfunctioning.
- 5 -
Read Me First!
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Read Me First! ........................................................................................ 4
Chapter 1 Introduction ............................................................................ 8
Features Summary ...................................................................................... 8
GA-K8NS Ultra-939 Motherboard Layout ................................................. 10
Block Diagram ........................................................................................... 11
Chapter 2 Hardware Installation Process ............................................. 13
Step 1: Install the Central Processing Unit (CPU)..................................... 14
Step 2: Install Memory Modules ................................................................ 16
Step 3: Install Expansion Cards ................................................................ 18
Step 4: Install I/O Peripherals Cables ....................................................... 19
Step 4-1: I/O Back Panel Introduction............................................................................ 19
Step 4-2: Connectors Introduction .................................................................................. 21
Chapter 3 BIOS Setup ......................................................................... 35
The Main Menu (For example: BIOS Ver. : E1) ........................................ 36
Standard CMOS Features......................................................................... 38
Advanced BIOS Features .......................................................................... 40
Integrated Peripherals ............................................................................... 42
Power Management Setup ....................................................................... 46
PnP/PCI Configurations ............................................................................. 48
PC Health Status........................................................................................ 49
MB Intelligent Tweaker(M.I.T.).................................................................. 50
GA-K8NS Ultra-939 Motherboard
- 6 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Top Performance ...................................................................................... 51
Select Language ....................................................................................... 51
Load Optimized Defaults ........................................................................... 52
Set Supervisor/User Password .................................................................. 52
Exit Without Saving .................................................................................... 53
Save & Exit Setup....................................................................................... 53
Chapter 4 Technical Reference ........................................................... 55
@BIOSTM Introduction ............................................................................... 55
Flash BIOS Method Introduction............................................................... 56
2- / 4- / 6- / 8- Channel Audio Function Introduction ................................. 63
Jack-Sensing and UAJ Introduction .......................................................... 69
Xpress Recovery Introduction ................................................................... 71
Serial ATA BIOS Setting Utility Introduction ............................................... 74
Chapter 5 Appendix ............................................................................. 81
- 7 -
Table of Contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 1 Introduction
Features Summary
CPU
y Socket 939 for AMD Althlon™ 64 / 64FX processor (K8)
y 2000MHz system bus
y Supports core frequencies in excess of 3000+ and faster
TM
Chipset
Memory
y nVIDIA® nForce3 Ultra
y 4 184-pin DDR DIMM sockets, support up to 4GB DRAM (Max.)(Note 1)
y Supports Dual Channel DDR400/333/266/200 DIMM
y 1 AGP slot supports 8X/4X(1.5V) mode
y 5 PCI slots
Slots
IDE Connections
y 2 IDE connection (UDMA 33/ATA 66/ATA 100/ATA 133),
allows connection of 4 IDE devices
FDD Connections
Onboard SATA
y 1 FDD connection, allows connection of 2 FDD devices
y 4 SerialATAconnectors
y 2 ports from nVIDIA® nForce3 Ultra controller (SATA0_SB, SATA1_SB);
TM
2 ports from SiI3512 controller (SATA0_SII, SATA1_SII)
y 1 parallel port supporting Normal/EPP/ECP mode
y 2 Serial ports (COMA & COMB)
y 8 USB 2.0/1.1 ports (rear x 4, front x 4 via cable)
y 3 IEEE1394b ports (requires cable)
y 1 front audio connector
Peripherals
y 1 IrDA connector for IR/CIR
y 1 PS/2 keyboard port
y 1 PS/2 mouse port
Onboard LAN
y Onboard Marvell 8001 chip (10/100/1000 Mbit) (LAN1)
y Onboard ICS 1883 chip (10/100 Mbit)(LAN2)
y 2 RJ45 ports
to be continued...
(Note 1) Due to standard PC architecture, a certain amount of memory is reserved for system usage
and therefore the actual memory size is less than the stated amount. For example, 4 GB of
memory size will instead be shown as 3.xxGB memory during system startup.
GA-K8NS Ultra-939 Motherboard
- 8 -
Download from Www.Somanuals.com. All Manuals Search And Download.
OnboardAudio
y ALC850 CODEC (UAJ)
y Supports Jack Sensing function
y Supports 2 / 4 / 6 / 8 channel audio
y Supports Line In/ Line Out/ MIC connection
y Surround Back Speaker (by optional Surround-Kit)
y SPDIF In / Out
y CD In / Game connector
y Onboard nVIDIA® nForce3 Ultra chipset
TM
Onboard SATA RAID
(SATA0_SB, SATA1_SB) y Supports data striping (RAID 0) or mirroring (RAID 1) function
y Supports data transfer rate of up 150 MB
y Supports a maximum of 2 SATAconnections
On-Board SATA RAID y Onboard Silicon Image SiI3512 chipset
(SATA0_SII, SATA1_SII) y Supports data striping (RAID 0) or mirroring (RAID 1) function
y Supports data transfer rate of up 150 MB
y Supports hot plugging function
y Supports a maximum of 2 SATAconnections
I/O Control
y IT8712
Hardware Monitor
y CPU / System / Power fan speed detection
y CPU / System / Power fan failure warning
y CPU temperature detection
y CPU warning temperature
y System voltage detection
y CPU smart fan control
y Thermalshutdownfunction
BIOS
y Use of licensed AWARD BIOS
y Supports Dual BIOS/Q-Flash, Multi-Language BIOS
y Supports @BIOS
AdditionalFeatures
Overclocking
Form Factor
y Supports EasyTune
y Over voltage via BIOS (CPU/DDR/AGP/HT-Link)
y Over clock via BIOS (CPU/AGP)
y ATX size form factor; 30.5cm x 24.4cm
- 9 -
Introduction
Download from Www.Somanuals.com. All Manuals Search And Download.
GA-K8NS Ultra-939 Motherboard Layout
ATX_12V
KB_MS
RAM_LED
FDD
SOCKET 939
CPU_FAN
AUDIO
ICS1883
SUR_CEN
F_AUDIO
SATA0_SB SATA1_SB
BAT
CLR_CMOS
2X_DET
CD_IN
nVIDIA®
nForce™
Ultra
3
IT8712
AGP
PCI1
PCI2
PCI3
BACKUP
BIOS
CODEC
MAIN
BIOS
IR_CIR
TSB82AA2
Marvell
8001
F_PANEL
PCI4
PCI5
SiI3512
TSB81BA3
F2_1394
PWR_LED
SYS_FAN
SATA1_SII SATA0_SII
GAME
INFO_LINK
F1_1394
F_USB2
F_USB1
SPDIF_IO
GA-K8NS Ultra-939 Motherboard
- 10 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Block Diagram
AMD K8
Socket 939
CPU
AGP Slot
4X/8X
CPUCLK+/- (800MHz)
AGPCLK
(66MHz)
DDR400/DDR333/266/200 DIMM
Unbuffered DIMMs
HyperTransport
Bus
BIOS
IR_CIR
LAN1
LAN2
nVIDIA
Game Port
LPC BUS
RJ45
RJ45
TM
nForce 3
Floppy
IT8712
5 PCI
Ultra
LPT Port
Marvell
8001
ICS 1883
PS/2 KB/Mouse
24 MHz
33 MHz
TSB82AA2
TSB81BA3
2 COM Ports
SiI3512
AC97
CODEC
8 USB
Ports
2 Serial ATA
3 IEEE1394b
ATA33/66/100/133
IDE Channels
2 Serial ATA
PCICLK
(33MHz)
- 11 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
GA-K8NS Ultra-939 Motherboard
- 12 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 2 Hardware Installation Process
To set up your computer, you must complete the following steps:
Step 1 - Install the Central Processing Unit (CPU)
Step 2 - Install Memory Modules
Step 3 - Install Expansion Cards
Step 4 - Install I/O Peripherals Cables
Step 1
Step 4
Step 2
Step 4
Step 4
Step 3
Congratulations! You have accomplished the hardware installation!
Turn on the power supply or connect the power cable to the power outlet. Continue with the
BIOS/softwareinstallation.
- 13 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Install the Central Processing Unit (CPU)
Before installing the processor and cooling fan, adhere to the following warning:
1. Please make sure the CPU type is supported by the motherboard.
2. The processor will overheat without the heatsink and/or fan, resulting in permanent
irreparabledamage.
3. If you do not match the CPU socket Pin 1 and CPU cut edge well, it will cause improper
installation. Please change the insert orientation.
4. Apply thermal grease between the processor and cooling fan.
5. Never run the processor without the heatsink properly and firmly attached. Permanent
damage will result.
6. Please set the CPU host frequency in accordance with your processor's specifications.
We don't recommend you to set the system bus frequency over the CPU's specification
because these specific bus frequencies are not the standard specifications for CPU,
chipset and most of the peripherals. Whether your system can run under these specific
bus frequencies properly will depend on your hardware configurations, including CPU,
Memory, Cards…etc.
The installation of the processor and cooling fan is performed in four main steps:
Step1-1. First, check the processor pins to see that none are bent. Move the socket lever to the
unlocked position as shown in Figure 1.(90o to the plane of the motherboard) prior to inserting
the processor. The pin 1 location is designated on the processor by a copper triangle that
matches up to a triangle on the socket as shown in Figure 2. Align the processor to the socket
and gently lower it into place. Do not force the processor into the socket.
Figure 1.
Pull the lever to the 90-degree directly.
Socket Lever
Figure 2.
Pin 1 location on the Socket and Processor. Move the
socket lever to the locked position while holding pressure
on the center of the processor.
GA-K8NS Ultra-939 Motherboard
- 14 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Step1-2. When the processor is installed in the socket, apply thermal grease to the processor(as shown
in Figure 3) prior to installing the heatsink. Phase change materials develop strong adhesive
forces between the heatsink and processor. Removing the heatsink under such condi-
tions can cause the processor to be removed from the socket without moving the
socket lever to the unlocked position and then damage the processor pins or socket
contacts.
** We recommend you to apply the thermal tape to provide better heat conduction between
your CPU and heatsink. (The CPU cooling fan might stick to the CPU due to the hardening of
the thermal paste. During this condition if you try to remove the cooling fan, you might pull the
processor out of the CPU socket alone with the cooling fan, and might damage the processor.
To avoid this from happening, we suggest you to either use thermal tape instead of thermal
paste, orremove the cooling fan with extreme caution.)
Figure 3.
Application of thermal grease to the processor.
Step 1-3.Once the thermal grease has been applied to the processor, the heatsink can be attached to
the processor. Align the heatsink assembly with the support frame mating with the backer plate
standoffs as shown in Figure 4 & 5.
Figure 4 & 5.
Alignment of heatsink assembly
with standoffs.
Step 1-4. Connect the fan power wires to the header on the motherboard as shown in Figure 6.
Figure 6.
Connecting the fan power wires.
- 15 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Install Memory Modules
Before installing the memory modules, adhere to the following warning:
1. When RAM LED is ON, do not install / remove DIMM from socket.
2. Please note that the DIMM module can only fit in one direction due to the notch.
Wrong orientation will cause improper installation. Please change the insert
orientation.
The motherboard has 4 dual inline memory module (DIMM) sockets. The BIOS will automatically
detects memory type and size. To install the memory module, just push it vertically into the DIMM
socket. The DIMM module can only fit in one direction due to the notch. Memory size can vary
between sockets.
Notch
DDR
1. The DIMM socket has a notch, so the DIMM memory
module can only fit in one direction.
2. Insert the DIMM memory module vertically into the DIMM
socket. Then push it down.
3. Close the plastic clip at both edges of the DIMM sockets
to lock the DIMM module.
Reverse the installation steps when you wish to remove
the DIMM module.
GA-K8NS Ultra-939 Motherboard
- 16 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Dual Channel DDR:
GA-K8NS Ultra-939 supports Dual Channel Technology.
When Dual Channel Technology is activated, the bandwidth of memory bus will be double the original
one,with the fastest speed at 6.4GB/s(DDR400) or 5.3GB/s(DDR333).
GA-K8NS Ultra-939 includes four DIMM slots, and each Channel has 2 DIMMs as following:
Channel A : DDR 1, DDR 3
Channel B : DDR 2, DDR 4
Below are the explanations:
1. One, DDR memory module is installed: The Dual Channel Technology will not operate
when one, DDR memory modules is installed and it will only work as Single Channel.
2. Two DDR memory modules are installed (the same memory size and type):
The Dual Channel Technology will operate when two DDR memory modules are inserted
individually into Channel A and Channel B (DDR 1 pairs up with DDR 2 and DDR 3, 4).
However, if the two DDR memory modules are inserted into the same Channel (DDR 1,
3 or DDR 2,4) then Dual Channel Technology will not operate.
3. If four DDR memory modules are installed (two pairs of DDR memory modules with the
same memory size and type): The Dual Channel Technology will operate when a pair of
DDR memory modules are inserted into DDR 1, 2 and another pair into DDR 3,4.
The following tables include all memory-installed combination types:
(Please note that those types not in the tables will not boot up.)
z Figure 1: Dual Channel Technology (DS: Double Side, SS: Single Side)
DDR 1
DS/SS
X
DDR 2
DS/SS
X
DDR 3
X
DDR 4
X
2 memory modules
4 memory modules
DS/SS
DS/SS
DS/SS
DS/SS
DS/SS
DS/SS
z Figure 2: Non Dual Channel Technology (DS: Double Side, SS: Single Side)
DDR 1
DS/SS
X
DDR 3
1 memory module
2 memory module
X
DS/SS
DS/SS
DS/SS
The GA-K8NS Ultra-939 doesn't support 3 memory modules. If 3 memory modules are
inserted, the system will not boot.
- 17 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Install Expansion Cards
1. Read the related expansion card's instruction document before install the expansion card into the
computer.
2. Remove your computer's chassis cover, screws and slot bracket from the computer.
3. Press the expansion card firmly into expansion slot in motherboard.
4. Be sure the metal contacts on the card are indeed seated in the slot.
5. Replace the screw to secure the slot bracket of the expansion card.
6. Replace your computer's chassis cover.
7. Power on the computer, if necessary, setup BIOS utility of expansion card from BIOS.
8. Install related driver from the operating system.
AGP Card
Please carefully pull out the small white-drawable bar at the end of the AGP slot when you try to install
/ uninstall the AGP card. Please align the AGP card to the onboard AGP slot and press firmly down on
the slot. Make sure your AGP card is locked by the small white-drawable bar.
When an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a non-supported
graphics card is inserted. Informing users that system might not boot up normally due to AGP
2X (3.3V) is not supported by the chipset.
GA-K8NS Ultra-939 Motherboard
- 18 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Install I/O Peripherals Cables
Step 4-1: I/O Back Panel Introduction
PS/2 Keyboard and PS/2 Mouse Connector
This connector supports standard PS/2
keyboard and PS/2 mouse.
PS/2 Mouse Connector
(6 pin Female)
PS/2 Keyboard Connector
(6 pin Female)
Parallel Port, Serial Ports (COMA / COMB)
This connector supports 2 standard COM ports
and 1 Parallel port. Devices like printer can be
connected to Parallel port; mouse and modem
etc. can be connected to Serial ports.
Parallel Port (25 pin Female)
COMA
COMB
Serial Port (9 pin Male)
- 19 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
/
USB/LAN Connector
Before you connect your device(s) into USB
connector(s), please make sure your device(s)
such as USB keyboard,mouse, scanner, zip,
speaker...etc. Have a standard USB interface.
Also make sure your OS supports USB
controller. If your OS does not support USB
controller, please contact OS vendor for
possible patch or driver upgrade. For more
information please contact your OS or device(s)
vendors.
LAN2
LAN1
USB 0
USB 1
USB 2
USB 3
LAN1 connector is fast Ethernet with 10/100/
1000 Mbps speed.
LAN2 connector is fast Ethernet with 10/100
Mbps speed.
After install onboard audio driver, you may
connect speaker to Line Out jack, microphone to
MIC In jack. Devices like CD-ROM, walkman
etc. can be connected to Line-In jack.
Please note:
You are able to use 2-/4-/6-/8-channel audio
feature by S/W selection.
If you want to enable 8-channel function you can
refer to page 30, and contact your nearest dealer
for optional SUR_CEN cable.
Audio Connectors
Line In
Line Out
MIC In
If you want the detail information for 2-/4-/6-/8-channel audio setup
installation, please refer to page 66.
GA-K8NS Ultra-939 Motherboard
- 20 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4-2: Connectors Introduction
1
9 14
5
2
8
7
3
15
16
25
6
19
16
17
13
12
22
4
23 18 24
21
10
20
1) ATX_12V
14) RAM_LED
15) 2X_DET
2) ATX (Power Connector)
3) CPU_FAN
16) F_AUDIO
17) SUR_CEN
18) SPDIF_IO
19) CD_IN
4) SYS_FAN
5) PWR_FAN
6) NB_FAN
7) FDD
20) F_USB1 / F_USB2
21) F1_1394 / F2_1394
22) IR_CIR
8) IDE1 / IDE2
9) SATA0_SB / SATA1_SB;
10) SATA0_SII / SATA1_SII
11) BATTERY
23) GAME
24) INFO_LINK
25) CLR_CMOS
12) F_PANEL
13) PWR_LED
- 21 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
1/2) ATX_12V / ATX (Power Connector)
With the use of the power connector, the power supply can supply enough stable power to all the
components on the motherboard. Before connecting the power connector, please make sure that
all components and devices are properly installed. Align the power connector with its proper
location on the motherboard and connect tightly. The ATX_12V power connector mainly supplies
power to the CPU. If the ATX_12V power connector is not connected, the system will not start.
Caution!
Please use a power supply that is able to handle the system voltage requirements. It is
recommended that a power supply that can withstand high power consumption be used (300W or
greater). If a power supply is used that does not provide the required power, the result can lead
to an unstable system or a system that is unable to start.
Pin No.
Definition
GND
1
2
3
4
4
2
3
1
GND
+12V
+12V
Pin No.
1
Definition
3.3V
2
3.3V
10
20
3
GND
4
VCC
5
GND
6
VCC
7
GND
8
Power Good
9
5V SB (stand by +5V)
10
11
12
13
14
15
16
17
18
19
20
+12V
3.3V
-12V
GND
1
11
PS_ON(soft on/off)
GND
GND
GND
-5V
VCC
VCC
GA-K8NS Ultra-939 Motherboard
- 22 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3/4/5) CPU_FAN / SYS_FAN / PWR_FAN (Cooler Fan Power Connector)
The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and
possesses a foolproof connection design.
Most coolers are designed with color-coded power connector wires. A red power connector wire
indicates a positive connection and requires a +12V power voltage. The black connector wire is
the ground wire(GND).
Please remember to connect the power to the cooler to prevent system overheating and failure.
Caution!
Please remember to connect the power to the CPU fan to prevent CPU overheating and failure.
Pin No.
Definition
GND
1
2
3
+12V
1
CPU_FAN / PWR_FAN
Sense
1
SYS_FAN
6) NB_FAN (Chip Fan Connector)
If you installed wrong direction, the chip fan will not work. Sometimes will damage the chip fan.
(Usually black cable is GND)
Pin No.
Definition
+12V
1
2
GND
1
- 23 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
7) FDD (Floppy Connector)
The FDD connector is used to connect the FDD cable while the other end of the cable connects to
the FDD drive. The types of FDD drives supported are: 360KB, 720KB, 1.2MB, 1.44MB and
2.88MB.
Please connect the red power connector wire to the pin1 position.
34
33
2
1
8) IDE1 / IDE2 (IDE Connector)
An IDE device connects to the computer via an IDE connector. One IDE connector can connect to
one IDE cable, and the single IDE cable can then connect to two IDE devices (hard drive or optical
drive). If you wish to connect two IDE devices, please set the jumper on one IDE device as Master
and the other as Slave (for information on settings, please refer to the instructions located on the IDE
device).
40
39
2
1
IDE2
IDE1
GA-K8NS Ultra-939 Motherboard
- 24 -
Download from Www.Somanuals.com. All Manuals Search And Download.
9/10) SATA0_SB / SATA1_SB; SATA0_SII / SATA1_SII (Serial ATA Connector)
Serial ATA can provide 150MB/s transfer rate. Please refer to the BIOS setting for the Serial ATA and
install the proper driver in order to work properly.
Pin No.
Definition
GND
TXP
1
7
1
2
3
4
5
6
7
SATA0_SB / SATA1_SB
TXN
GND
RXN
RXP
7
1
GND
SATA0_SII / SATA1_SII
The SATA0_SII / SATA1_SII connectors
support hot plug function.
11) BATTERY
CAUTION
Danger of explosion if battery is incorrectly
replaced.
Replace only with the same or equivalent type
recommended by the manufacturer.
Dispose of used batteries according to the
manufacturer's instructions.
If you want to erase CMOS...
1. Turn OFF the computer and unplug the power cord.
2. Remove the battery, wait for 30 second.
3. Re-install the battery.
4. Plug the power cord and turn ON the computer.
- 25 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
12) F_PANEL (Front Panel Jumper)
Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis
front panel to the F_PANEL connector according to the pin assignment below.
19
20
SPEAK-
SPEAK+
Speaker Connector
Power Switch
NC
RES+
RES-
HD-
HD+
PW-
Reset Switch
PW+
MSG-
MSG+
Message LED/
Power/
IDE Hard Disk
Active LED
2
1
Sleep LED
HD (IDE Hard Disk Active LED)
(Blue)
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
Pin 1: VCC(+)
SPK (Speaker Connector)
(Amber)
Pin 2- Pin 3: NC
Pin 4: Data(-)
RES (Reset Switch)
Open: Normal Operation
(Green)
Close: Reset Hardware System
Open: Normal Operation
Close: Power On/Off
Pin 1: LED anode(+)
Pin 2: LED cathode(-)
N C
PW (Power Switch)
(Red)
MSG (Message LED/ Power/ Sleep LED)
(Yellow)
NC (Purple)
GA-K8NS Ultra-939 Motherboard
- 26 -
Download from Www.Somanuals.com. All Manuals Search And Download.
13) PWR_LED
PWR_LED is connect with the system power indicator to indicate whether the system is on/off.
It will blink when the system enters suspend mode. If you use dual color LED, power LED will turn
to another color.
Pin No.
Definition
MPD+
MPD-
1
2
3
1
MPD-
14) RAM_LED
Do not remove memory modules while RAM_LED is on. It might cause short or other unexpected
damages due to the stand by voltage. Remove memory modules only when AC power cord is
disconnected.
_
+
- 27 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
15) 2X_LED
When an AGP 2X (3.3V) card is installed the 2X_DET will light up, indicating a non-supported
graphics card is inserted. Informing users that system might not boot up normally due to AGP 2X
(3.3V) is not supported by the chipset.
+
_
16) F_AUDIO (Front Audio Connector)
If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper.
In order to utilize the front audio header, your chassis must have front audio connector. Also please
make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To
find out if the chassis you are buying support front audio connector, please contact your dealer.
Please note, you can have the alternative of using front audio connector or of using rear audio
connector to play sound.
Pin No.
Definition
MIC
1
2
3
4
5
6
7
8
9
10
GND
10
9
1
MIC_BIAS
Power
Front Audio (R)
Rear Audio (R)
Reserved
No Pin
2
Front Audio (L)
Rear Audio (L)
GA-K8NS Ultra-939 Motherboard
- 28 -
Download from Www.Somanuals.com. All Manuals Search And Download.
17) SUR_CEN (Surround Center Connector)
Please contact your nearest dealer for optional SUR_CEN cable.
Pin No.
Definition
SUR OUTL
SUR OUTR
GND
1
2
3
4
5
6
7
8
8
2
7
1
No Pin
CENTER_OUT
BASS_OUT
AUX_L
AUX_R
18) SPDIF_IO (SPDIF In / Out Connector)
The SPDIF output is capable of providing digital audio to external speakers or compressed AC3
data to an external Dolby Digital Decoder. Use this feature only when your stereo system has
digital input and output function. Use SPDIF in feature only when your device has digital output
function. Be careful with the polarity of the SPDIF_IO connector. Check the pin assignment
carefully while you connect the SPDIF cable, incorrect connection between the cable and connec-
tor will make the device unable to work or even damage it. For optional SPDIF cable, please
contact your local dealer.
Pin No.
Definition
VCC
1
2
3
4
5
6
2
1
6
5
No Pin
SPDIF
SPDIFI
GND
GND
- 29 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
19) CD_IN (CD In Connector)
Connect CD-ROM or DVD-ROM audio out to the CD_IN connector.
1
Pin No.
Definition
CD-L
1
2
3
4
GND
GND
CD-R
20) F_USB1 / F_USB2 (Front USB Connector)
Be careful with the polarity of the front USB connector. Check the pin assignment carefully while
you connect the front USB cable, incorrect connection between the cable and connector will make
the device unable to work or even damage it. For optional front USB cable, please contact your
local dealer.
Pin No.
Definition
Power
1
2
3
4
5
6
7
8
9
10
2
1
10
9
Power
USB Dx-
USB Dy-
USB Dx+
USB Dy+
GND
GND
No Pin
NC
GA-K8NS Ultra-939 Motherboard
- 30 -
Download from Www.Somanuals.com. All Manuals Search And Download.
21) F1_1394 / F2_1394 (Front IEEE1394 Connector)
Serial interface standard set by Institute of Electrical and Electronics Engineers, which has features
like high speed, highbandwidth and hot plug. Be careful with the polarity of the IEEE1394 connector.
Check the pin assignment carefully while you connect the IEEE1394 cable, incorrect connection
between the cable and connector will make the device unable to work or even damage it. For
optional IEEE1394 cable, please contact your local dealer.
F2_1394
2
1
16
15
F1_1394
2
1
10
9
Pin No.
1
2
3
4
5
6
7
Definition
Power
Power
TPA0+
TPA0-
GND
Pin No.
Definition
1
2
3
4
5
6
7
8
9
10
TPA2+
TPA2-
GND
GND
TPB0+
TPB0-
Power
Power
TPA1+
TPA1-
GND
No Pin
TPB1+
TPB1-
GND
8
9
TPB2+
TPB2-
No Pin
Power
Power
GND
10
11
12
13
14
15
16
22) IR_CIR
Make sure the pin 1 on the IR device is aling with pin one the connector. To enable the IR/CIR
function, you are required to purchase an optional IR/CIR module. To use IR function only, please
connect IR module to Pin1 to Pin5. Be careful with the polarity of the IR/CIR connector. Check the
pin assignment carefully while you connect the IR/CIR cable, incorrect connection between the
cable and connector will make the device unable to work or even damage it. For optional IR/CIR
cable, please contact your local dealer.
Pin No.
Definition
VCC
1
2
3
4
5
6
7
8
9
10
NC
IRRX
GND
6
1
10
5
IRTX
NC
CIRRX
+5VSB
CIRTX
NC
- 31 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
23) GAME (Game Connector)
This connector supports joystick, MIDI keyboard and other relate audio devices. Check the pin
assignment while you connect the game cables. Please contact your nearest dealer for optional
game cables.
Pin No.
Definition
VCC
1
2
GRX1_R
GND
3
2
1
16
15
4
GPSA2
VCC
5
6
GPX2_R
GPY2_R
MSI_R
GPSA1
GND
7
8
9
10
11
12
13
14
15
16
GPY1_R
VCC
GPSB1
MSO_R
GPSB2
No Pin
24) INFO_LINK
This connector allows you to connect some external devices to provide you extra function. Check
the pin assignment while you connect the external device cable. Please contact your nearest
dealer for optional external device cable.
Pin No.
Definition
SMBCLK
VCC
1
2
3
4
5
6
7
8
9
10
SMBDATA
GPIO
GND
2
1
10
9
GND
No Pin
NC
+12V
+12V
GA-K8NS Ultra-939 Motherboard
- 32 -
Download from Www.Somanuals.com. All Manuals Search And Download.
25) CLR_CMOS (Clear CMOS)
You may clear the CMOS data to its default values by this jumper. To clear CMOS, temporarily
short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
Open: Normal
1
Close: Clear CMOS
1
- 33 -
Hardware Installation Process
Download from Www.Somanuals.com. All Manuals Search And Download.
GA-K8NS Ultra-939 Motherboard
- 34 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3 BIOS Setup
BIOS Setup is an overview of the BIOS Setup Program. The program that allows users to modify the
basic system configuration. This type of information is stored in battery-backed CMOS RAM so that it
retains the Setup information when the power is turned off.
ENTERING SETUP
Powering ON the computer and pressing <Del> immediately will allow you to enter Setup. If you require
more advanced BIOS settings, please go to "Advanced BIOS" setting menu. To enter
Advanced BIOS setting menu, press "Ctrl+F1" key on the BIOS screen.
CONTROL KEYS
< >
< >
Move to previous item
Move to next item
<
<
>
Move to the item in the left hand
Move to the item in the right hand
Select Item
>
<Enter>
<Esc>
Main Menu - Quit and not save changes into CMOS Status Page Setup Menu and
Option Page Setup Menu - Exit current page and return to Main Menu
<+/PgUp> Increase the numeric value or make changes
<-/PgDn> Decrease the numeric value or make changes
<F1>
<F2>
<F3>
<F4>
<F5>
<F6>
<F7>
<F8>
<F9>
<F10>
General help, only for Status Page Setup Menu and Option Page Setup Menu
Item Help
Reserved
Reserved
Restore the previous CMOS value from CMOS, only for Option Page Setup Menu
Load the file-safe default CMOS value from BIOS default table
Load the Optimized Defaults
Dual BIOS/Q-Flash utility
System Information
Save all the CMOS changes, only for Main Menu
- 35 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Main Menu
The on-line description of the highlighted setup function is displayed at the bottom of the screen.
Status Page Setup Menu / Option Page Setup Menu
Press F1 to pop up a small help window that describes the appropriate keys to use and the possible
selections for the highlighted item. To exit the Help Window press <Esc>.
The Main Menu (For example: BIOS Ver. : E1)
Once you enter Award BIOS CMOS Setup Utility, the Main Menu (as figure below) will appear on the
screen. The Main Menu allows you to select from eight setup functions and two exit choices. Use arrow
keys to select among the items and press <Enter> to accept or enter the sub-menu.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Top Performance
Select Language
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
MB Intelligent Tweaker(M.I.T.)
Exit Without Saving
ESC: Quit
F3: Change Language
F10: Save & Exit Setup
F8: Dual BIOS/Q-Flash
Time, Date, Hard Disk Type...
If you can't find the setting you want, please press "Ctrl + F1" to search the advanced option
hidden.
z Standard CMOS Features
This setup page includes all the items in standard compatible BIOS.
z Advanced BIOS Features
This setup page includes all the items ofAward special enhanced features.
z Integrated Peripherals
This setup page includes all onboard peripherals.
z Power Management Setup
This setup page includes all the items of Green function features.
z PnP/PCI Configurations
This setup page includes all the configurations of PCI & PnP ISA resources.
GA-K8NS Ultra-939 Motherboard
- 36 -
Download from Www.Somanuals.com. All Manuals Search And Download.
z PC Health Status
This setup page is the System auto detect Temperature, voltage, fan, speed.
z MB Intelligent Tweaker(M.I.T.)
This setup page is control CPU's clock and frequency ratio.
z Top Performance
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
z Select Language
This setup page is select multi-language.
z Load Optimized Defaults
Optimized Defaults indicates the value of the system parameters which the system would be in
bestperformanceconfiguration.
z Set Supervisor Password
Change, set, or disable password. It allows you to limit access to the system and Setup, or just
to Setup.
z Set User Password
Change, set, or disable password. It allows you to limit access to the system.
z Save & Exit Setup
Save CMOS value settings to CMOS and exit setup.
z Exit Without Saving
Abandon all CMOS value changes and exit setup.
- 37 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Standard CMOS Features
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Standard CMOS Features
Date (mm:dd:yy)
Time (hh:mm:ss)
Wed, May 19 2004
22:31:24
Item Help
Menu Level`
Change the day, month,
`
`
`
`
`
`
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
IDE Channel 2 Master
IDE Channel 3 Master
[None]
[None]
[None]
[None]
[None]
[None]
year
<Week>
Sun. to Sat.
<Month>
Jan. to Dec.
Drive A
Drive B
[1.44M, 3.5"]
[None]
<Day>
Floppy 3 Mode Suport
[Disabled]
1 to 31 (or maximum
allowed in the month)
Halt On
[All, But Keyboard]
<Year>
Base Memory
Extended Memory
Total Memory
640K
127M
128M
1999 to 2098
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
Date
The date format is <week>, <month>, <day>, <year>.
Week
Month
Day
The week, from Sun to Sat, determined by the BIOS and is displayed only.
The month, Jan. Through Dec.
The day, from 1 to 31 (or the maximum allowed in the month)
The year, from 1999 through 2098.
Year
Time
The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour
military-time clock. For example, 1 p.m. is 13:00:00.
IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave / IDE Channel 2 Master / IDE
Channel 3 Master
IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection.
IDE Channel 0 Master(Slave) / IDE Channel 1 Master(Slave) / IDE Channel 2 Master / IDE Channel
3 Master Device Setup. You can use one of three methods:
Auto
None
Allows BIOS to automatically detect IDE devices during POST(default)
Select this if no IDE devices are used and the system will skip the automatic
detection step and allow for faster system start up.
Manual
User can manually input the correct settings
Access Mode Use this to set the access mode for the hard drive. The four options are:
CHS/LBA/Large/Auto(default:Auto)
Hard drive information should be labeled on the outside drive casing. Enter the appropriate option
based on this information.
Cylinder
Head
Precomp
Number of cylinders
Number of heads
Write precomp
Landing Zone Landing zone
Sector
Number of sectors
If a hard disk has not been installed, select NONE and press <Enter>.
GA-K8NS Ultra-939 Motherboard
- 38 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
None
No floppy drive installed
360K, 5.25"
1.2M, 5.25"
5.25 inch PC-type standard drive; 360K byte capacity.
5.25 inch AT-type high-density drive; 1.2M byte capacity
(3.5 inch when 3 Mode is Enabled).
720K, 3.5"
1.44M, 3.5"
2.88M, 3.5"
3.5 inch double-sided drive; 720K byte capacity
3.5 inch double-sided drive; 1.44M byte capacity.
3.5 inch double-sided drive; 2.88M byte capacity.
Floppy 3 Mode Support (for Japan Area)
Disabled
Drive A
Drive B
Both
Normal Floppy Drive. (Default value)
Drive A is 3 mode Floppy Drive.
Drive B is 3 mode Floppy Drive.
Drive A & B are 3 mode Floppy Drives.
Halt on
The category determines whether the computer will stop if an error is detected during power up.
No Errors
The system boot will not stop for any error that may be detected and you
will be prompted.
All Errors
Whenever the BIOS detects a non-fatal error the system will be stopped.
All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other
errors. (Default value)
All, But Diskette
The system boot will not stop for a disk error; it will stop for all other errors.
All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all
other errors.
Memory
The category is display-only which is determined by POST (Power On Self Test) of the BIOS.
Base Memory
The POST of the BIOS will determine the amount of base (or conventional) memory installed
in the system.
The value of the base memory is typically 512K for systems with 512K memory installed on
the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.
Extended Memory
The BIOS determines how much extended memory is present during the POST.
This is the amount of memory located above 1 MB in the CPU's memory address map.
Total Memory
This item displays the memory size that used.
- 39 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced BIOS Features
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Advanced BIOS Features
`
Hard Disk Boot Priority
First Boot Device
Second Boot Device
Third Boot Device
Boot Up Floopy Seek
Password Check
[Press Enter]
[Floppy]
[Hard Disk]
[CDROM]
[Disabled]
[Setup]
Item Help
Menu Level`
Flexible AGP 8X
Init Display First
[Auto]
[AGP]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
Hard Disk Boot Priority
Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc.
Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
Press <ESC> to exit this menu.
First / Second / Third Boot Device
Floppy
LS120
Hard Disk
CDROM
ZIP
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP.
USB-FDD
USB-ZIP
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
USB-CDROM Select your boot device priority by USB-CDROM.
USB-HDD
LAN
Disabled
Select your boot device priority by USB-HDD.
Select your boot device priority by LAN.
Select your boot device priority by Disabled.
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
Enabled
Disabled
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note that
BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all 80 tracks.
BIOS will not search for the type of floppy disk drive by track number. Note that
there will not be any warning message if the drive installed is 360K. (Default value)
GA-K8NS Ultra-939 Motherboard
- 40 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Password Check
System
The system can not boot and can not access to Setup page will be denied if the
correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the correct password
is not entered at the prompt. (Default value)
Felxible AGP 8X
Auto
Automatically set AGP transfer rate according to AGP compatibility and stability.
(Default value)
8X
4X
Always set AGP transfer rate to 8X mode if the 8X mode supported by the AGP card.
Set AGP transfer rate to 4X mode no matter what the AGP transfer rate the card is.
Init Display First
This feature allows you to select the first initiation of the monitor display from which card when you
install an AGP card and a PCI VGA card on the motherboard.
AGP
PCI slot
Set Init display first to AGP. (Default value)
Set Init display first to PCI.
- 41 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
IDE Function Setup
[Press Enter]
[Enabled]
[Enabled]
[V1.1+V2.0]
[Disabled]
[Disabled]
[Enabled]
[Auto]
Item Help
Menu Level`
On-Chip Primary PCI IDE
On-Chip Secondary PCI IDE
USB Host Controller
USB Keyboard Support
USB Mouse Support
Serial-ATA 2(Internal PHY)
AC97 Audio
On-Chip LAN(nVIDIA)
Onboard Serial ATA
Serial ATA Function
Onboard 1394
Onboard LAN Control
Onboard LAN Boot ROM
Onboard Serial Port 1
Onboard Serial Port 2
Onboard Parallel Port
Parallel Port Mode
[Auto]
[Enabled]
[RAID]
[Enabled]
[Enabled]
[Disabled]
[3F8/IRQ4]
[2F8/IRQ3]
[378/IRQ7]
[SPP]
x
ECP Mode Use DMA
3
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
Game Port Address
Midi Port Address
Midi Port IRQ
CIR Port Address
CIR Port IRQ
[201]
[Disabled]
10
[Disabled]
11
Item Help
Menu Level`
x
x
IDE DMA transfer
[Enabled]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
IDE Function Setup
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
IDE Function Setup
IDE RAID
[Enabled]
Item Help
Menu Level`
IDE Channel 0 Master RAID
IDE Channel 0 Slave RAID
IDE Channel 1 Master RAID
IDE Channel 1 Slave RAID
SATA Primary Master RAID
SATA Secndry Master RAID
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
GA-K8NS Ultra-939 Motherboard
- 42 -
Download from Www.Somanuals.com. All Manuals Search And Download.
IDE RAID
Enabled
Enable IDE RAID function.
Disabled
Disable this function. (Default value)
IDE Channel 0 Master RAID
Enabled
Enable 1st master channel IDE RAID function.
Disabled
Disable this function. (Default value)
IDE Channel 0 Slave RAID
Enabled
Enable 1st slave channel IDE RAID function.
Disabled
Disable this function. (Default value)
IDE Channel 1 Master RAID
Enabled
Enable 2nd master channel IDE RAID function.
Disabled
Disable this function. (Default value)
IDE Channel 1 Slave RAID
Enabled
Enable 2nd slave channel IDE RAID function.
Disabled
Disable this function. (Default value)
SATA Primary Master RAID
Enabled
Enable 1st SATA RAID function.
Disabled
Disable this function. (Default value)
SATA Secndry Master RAID
Enabled
Enable 2nd SATA RAID function.
Disabled
Disable this function. (Default value)
On-Chip Primary PCI IDE
Enabled
Enable onboard 1st channel IDE port. (Default value)
Disabled
Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
Enabled
Enable onboard 2nd channel IDE port. (Default value)
Disabled
Disable onboard 2nd channel IDE port.
USB Host Controller
Disabled
V1.1+V2.0
V1.1
Disable this function if you are not using onboard USB function.
Enable USB 1.1 and USB 2.0 controller. (Default value)
Only enable USB 1.1 controller.
USB Keyboard Support
Enabled
Enable USB keyboard support.
Disabled
Disable USB keyboard support. (Default value)
USB Mouse Support
Enabled
Enable USB mouse support.
Disabled
Disable USB mouse support. (Default value)
Serial-ATA 2 (Internal PHY) (Onboard nVIDIA nForce3 Ultra chipset)
Enabled
Enable Serial ATA supported. (Default value)
Disabled
Disable Serial ATA supported.
AC97 Audio
Auto
Disabled
Enable onboard AC'97 audio function. (Default value)
Disable this function.
- 43 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
VIA On-Chip LAN (nVIDIA)
Auto
Auto-detect onboard LAN function. (Default value)
Disabled
Disable onboard LAN function.
Onboard Serial ATA (Onboard SiI3512 chipset)
Enabled
Enable onboard Serial ATA chip function. (Default value)
Disabled
Disable this function.
Serial ATA Function
RAID
Select onboard Serial ATA chip function as RAID. (Default value)
BASE
Select onboard Serial ATA chip function as base.
Onboard 1394
Enabled
Disabled
Enable onboard IEEE1394 function. (Default value)
Disable onboard IEEE1394 function.
Onboard LAN Control
Enabled
Enable onboard LAN chip function. (Default value)
Disabled
Disable onboard LAN chip function.
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled
Disabled
Enable this function.
Disable this function. (Default value)
Onboard Serial Port 1
Auto
BIOS will automatically setup the port 1 address.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Enable onboard Serial port 1 and address is 3F8. (Default value)
Enable onboard Serial port 1 and address is 2F8.
Enable onboard Serial port 1 and address is 3E8.
Enable onboard Serial port 1 and address is 2E8.
Disable onboard Serial port 1.
Onboard Serial Port 2
Auto
BIOS will automatically setup the port 2 address.
3F8/IRQ4
2F8/IRQ3
3E8/IRQ4
2E8/IRQ3
Disabled
Enable onboard Serial port 2 and address is 3F8.
Enable onboard Serial port 2 and address is 2F8. (Default value)
Enable onboard Serial port 2 and address is 3E8.
Enable onboard Serial port 2 and address is 2E8.
Disable onboard Serial port 2.
Onboard Parallel Port
378/IRQ7
278/IRQ5
Disabled
Enable onboard LPT port and address is 378/IRQ7. (Default value)
Enable onboard LPT port and address is 278/IRQ5.
Disable onboard LPT port.
3BC/IRQ7
Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP
Using Parallel port as Standard Parallel Port. (Default value)
EPP
ECP
ECP+EPP
Using Parallel port as Enhanced Parallel Port.
Using Parallel port as Extended Capabilities Port.
Using Parallel port as ECP & EPP mode.
GA-K8NS Ultra-939 Motherboard
- 44 -
Download from Www.Somanuals.com. All Manuals Search And Download.
ECP Mode Use DMA
3
Set ECP Mode Use DMA to 3. (Default value)
1
Set ECP Mode Use DMA to 1.
Game Port Address
201
Set Game Port Address to 201. (Default value)
209
Disabled
Set Game Port Address to 209.
Disable this function.
Midi Port Address
300
Set Midi Port Address to 300.
330
Set Midi Port Address to 330.
Disabled
Disable this function. (Default value)
Midi Port IRQ
5
Set Midi Port IRQ to 5.
10
Set Midi Port IRQ to 10. (Default value)
CIR Port Address
310
Set CIR Port Address to 310.
320
Set CIR Port Address to 320.
Disabled
Disable this function. (Default value)
CIR Port IRQ
5
Set CIR Port IRQ to 5.
11
Set CIR Port IRQ to 11. (Default value)
IDE DMA transfer access
Enabled
Enable IDE DMA transfer access. (Default value)
Disabled
Disable this function.
- 45 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Power Management Setup
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Power Management Setup
ACPI Suspend Type
Soft-Off by PWR-BTTN
PME Event Wake Up
Modem Ring On
S3 Resume by USB device
Resume by Alarm
Day of Month Alarm
Time (hh:mm:ss) Alarm
Power On by Mouse
Power On by Keyboard
KB Power ON Password
AC Back Function
[S1(POS)]
[Instant-Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
Everyday
0 : 0 : 0
Item Help
Menu Level`
[S1]
Set suspend type to
Power On Suspend under
ACPI OS
x
x
[Disabled]
[Disabled]
Enter
[S3]
Set suspend type to
Suspend to RAM under
ACPI OS
x
[Soft-Off]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
ACPI Suspend Type
S1(POS)
S3(STR)
Set ACPI suspend type to S1/POS (Power On Suspend). (Default value)
Set ACPI suspend type to S3/STR (Suspend To RAM).
Soft-Off by PWR-BTTN
Instant-off
Press power button then power off instantly. (Default value)
Delay 4 Sec.
Press power button 4 seconds to power off. Enter suspend if button is
pressed less than 4 seconds.
PME Event Wake Up
This feature requires an ATX power supply that provides at least 1A on the 5VSB lead.
Disabled
Enabled
Disable this function. (Default value)
Enable PME as wake up event.
Modem Ring On
An incoming call via modem can awake the system from any suspend state.
Disabled
Enabled
Disable Modem Ring on function. (Default value)
Enable Modem Ring on function.
S3 Resume by USB Device
Disabled
Disable this function. (Default value)
Enable
Enable USB device wake up system from S3 suspend type.
Resume by Alarm
You can set "Resume by Alarm" item at "Enabled" and key in date/time to power on system.
Disabled
Enabled
Disable this function. (Default value)
Enable alarm function to POWER ON system.
If RTC Alarm Lead To Power On is Enabled.
Day of Month Alarm :
Time (hh: mm: ss) Alarm :
Everyday, 1~31
(0~23) : (0~59) : (0~59)
GA-K8NS Ultra-939 Motherboard
- 46 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Power On by Mouse
Disabled
Disabled this function. (Default value)
Double Click
Double click on PS/2 mouse left button to power on system.
Power On by Keyboard
Disabled
Disabled this function. (Default value)
Password
Keyboard 98
Enter from 1 to 5 characters to set the keyboard power on password.
If there is a "POWER" button on your keyboard, you can press the key to
power on your system.
KB Power ON Password
When "Power On by Keyboard" set at Password, you can set the password here.
Enter
Input password(from 1 to 5 characters) and press Enter to set the password.
AC Back Function
Soft-Off
Full-On
Always in off state when AC back. (Default value)
Always power on the system when AC back.
- 47 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
PnP/PCI Configurations
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PnP/PCI Configurations
PCI 3 IRQ Assignment
PCI 4 IRQ Assignment
PCI 1/5 IRQ Assignment
PCI 2 IRQ Assignment
[Auto]
[Auto]
[Auto]
[Auto]
Item Help
Menu Level`
Device(s) using this
INT:
RAID Cntrlr
- Bus 0 Dev12 Func 0
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
PCI 3 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
Auto assign IRQ to PCI 3. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 3.
PCI 4 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
Auto assign IRQ to PCI 4. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 4.
PCI 1/5 IRQ Assignment
Auto
Auto assign IRQ to PCI 1/5. (Default value)
3,4,5,7,9,10,11,12,14,15
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 1/PCI5.
PCI 2 IRQ Assignment
Auto
3,4,5,7,9,10,11,12,14,15
Auto assign IRQ to PCI 2. (Default value)
Set IRQ 3,4,5,7,9,10,11,12,14,15 to PCI 2.
GA-K8NS Ultra-939 Motherboard
- 48 -
Download from Www.Somanuals.com. All Manuals Search And Download.
PC Health Status
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
PC Health Status
Vcore
DDR25V
OK
OK
Item Help
Menu Level`
+3.3V
OK
+12V
OK
Current CPU Temperature
Current CPU FAN Speed
Current POWER FAN Speed
Current SYSTEM FAN Speed
CPU Warning Temperature
CPU FAN Fail Warning
POWER FAN Fail Warning
SYSTEM FAN Fail Warning
CPU Smart FAN Control
51°C
3125 RPM
0 RPM
0 RPM
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Enabled]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
Current Voltage (V) Vcore / DDR25V / +3.3V / +12V
Detect system's voltage status automatically.
Current CPU Temperature
Detect CPU temperature automatically.
Current CPU/POWER/SYSTEM FAN Speed (RPM)
Detect CPU/power/system fan speed status automatically.
CPU Warning Temperature
Disabled
Don't monitor current temperature.
60oC / 140oF
70oC / 158oF
80oC / 176oF
90oC / 194oF
Monitor CPU temperature at 60oC / 140oF.
Monitor CPU temperature at 70oC / 158oF.
Monitor CPU temperature at 80oC / 176oF.
Monitor CPU temperature at 90oC / 194oF.
CPU/POWER/SYSTEM FAN Fail Warning
Disabled
Fan warning function disable. (Default value)
Enabled
Fan warning function enable.
CPU Smart FAN Control
Disabled
Disable this function.
Enabled
Enable CPU Smart Fan control function. (Default value)
a. When the CPU temperature is higher than 60 degrees Celsius, CPU fan
will run at full speed.
b. When the CPU temperature is between 50 and 60 degrees Celsius, CPU
fan will run at high speed.
c. When the CPU temperature is between 40 and 50 degrees Celsius, CPU
fan will run at medium speed.
d. When the CPU temperature is lower than 40 degrees Celsius, CPU fan
will run at low speed.
- 49 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
MB Intelligent Tweaker(M.I.T.)
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
MB Intelligent Tweaker(M.I.T.)
CPU OverClock in MHz
AGP OverClock in MHz
CPU Voltage Control
Normal CPU Vcore
AGP Voltage Control
HT-Link Voltage Control
DDR voltage control
[200]
[66]
Item Help
Menu Level`
[Normal]
1.500V
[Normal]
[Normal]
[Normal]
KLJI: Move
Enter: Select
+/-/PU/PD: Value
F10: Save
ESC: Exit
F1: General Help
F3: Language
F5: Previous Values
F6: Fail-Save Defaults
F7: Optimized Defaults
Incorrect using these features may cause your system broken. For power End-User use only!
CPU OverClock in MHz
200MHz ~ 300MHz
Increase CPU frequency as user selected.
Increase AGP frequency as user selected.
AGP OverClock in MHz
66MHz ~ 100MHz
CPU Voltage Control
Supports adjustable CPU Vcore from 0.800V to 1.700V by 0.025V step.
(Default value: Normal)
Normal CPU Vcore
Display your CPU Vcore voltage.
AGP Voltage Control
Normal
+0.1v
+0.2v
+0.3v
Set AGP voltage as AGP required. (Default value)
Increase AGP voltage +0.1V.
Increase AGP voltage +0.2V.
Increase AGP voltage +0.3V.
HT-Link Voltage Control
Normal
+0.1v
+0.2v
+0.3v
Supply HT-Link voltage as HT-Link required. (Default value)
Increase HT-Link voltage +0.1V.
Increase HT-Link voltage +0.2V.
Increase HT-Link voltage +0.3V.
DDR voltage control
Normal
+0.1v
Supply DDR voltage as DDR required. (Default value)
Increase DDR voltage +0.1V.
+0.2v
Increase DDR voltage +0.2V.
GA-K8NS Ultra-939 Motherboard
- 50 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Top Performance
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Periphera
Top Performance
Select Language
ults
rd
Top Performance
Power Management
Disabled.........................[„]
PnP/PCI Configurati
PC Health Status
Enabled..........................[
]
MB Intelligent Twea
ESC: Quit
KL: Move
ENTER: Accept
F8: Dual BIOS/Q-Flash
p
ESC: Abort
If you wish to maximize the performance of your system, set "Top Performance" as "Enabled".
Disabled Disable this function. (Default Value)
Enabled Enable Top Performance function.
"Top Performance" will increase H/W working speed. Different system configuration (both H/W
component and OS) will effect the result. For example, the same H/W configuration might not run
properly with Windows XP, but works smoothly with Windows NT. Therefore, if your system is not
perform enough, the reliability or stability problem will appear sometimes, and we will recommend you
disabling the option to avoid the problem as mentioned above.
Select Language
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations
PC Health Status
Top Performance
Select Language
d Defaults
Password
ord
up
MB Intelligent Tweaker(M.
ving
ESC: Quit
guage
it Setup
F8: Dual BIOS/Q-Flash
Multi-Language BIOS supports 5 languages. There are English, French, German, Spanish, Japanese.
- 51 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Load Optimized Defaults
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI C
PC Health Status
Top Performance
Select Language
Load Optimized Defaults
Set Supervisor Password
Load Optimized Defaults (Y/N)? N
Save & Exit Setup
Exit Without Saving
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F3: Change Language
F10: Save & Exit Setup
F8: Dual BIOS/Q-Flash
Load Optimized Defaults
Selecting this field loads the factory defaults for BIOS and Chipset Features which the system automatically
detects.
Set Supervisor/User Password
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
Top Performance
Select Language
Load Optimized Defaults
Set Supervisor Password
Save & Exit Setup
Enter Password:
PnP/PCI C
PC Health Status
MB Intelligent Tweaker(M.I.T.)
Exit Without Saving
ESC: Quit
F3: Change Language
F10: Save & Exit Setup
F8: Dual BIOS/Q-Flash
Change/Set/Disable Password
When you select this function, the following message will appear at the center of the screen to
assist you in creating a password.
Type the password, up to eight characters, and press <Enter>. You will be asked to confirm the
password. Type the password again and press <Enter>. You may also press <Esc> to abort the
selection and not enter a password.
To disable password, just press <Enter> when you are prompted to enter password. A message
"PASSWORD DISABLED" will appear to confirm the password being disabled. Once the password is
disabled, the system will boot and you can enter Setup freely.
The BIOS Setup program allows you to specify two separate passwords:
SUPERVISOR PASSWORD and a USER PASSWORD. When disabled, anyone may access all BIOS
Setup program function. When enabled, the Supervisor password is required for entering the BIOS
Setup program and having full configuration fields, the User password is required to access only basic
items.
If you select "System" at "Password Check" in Advance BIOS Features Menu, you will be
prompted for the password every time the system is rebooted or any time you try to enter Setup Menu.
If you select "Setup" at "Password Check" in Advance BIOS Features Menu, you will be prompted
only when you try to enter Setup.
GA-K8NS Ultra-939 Motherboard
- 52 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Save & Exit Setup
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI C
PC Health Status
Top Performance
Select Language
Load Optimized Defaults
Set Supervisor Password
Save to CMOS and EXIT (Y/N)? Y
Save & Exit Setup
Exit Without Saving
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F3: Change Language
F10: Save & Exit Setup
F8: Dual BIOS/Q-Flash
Save & Exit Setup
Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS.
Type "N" will return to Setup Utility.
Exit Without Saving
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Power Management Setup
PnP/PCI C
PC Health Status
Top Performance
Select Language
Load Optimized Defaults
Set Supervisor Password
Quit Without Saving (Y/N)? N
Save & Exit Setup
Exit Without Saving
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F3: Change Language
F10: Save & Exit Setup
F8: Dual BIOS/Q-Flash
Abandon all Data
Type "Y" will quit the Setup Utility without saving to RTC CMOS.
Type "N" will return to Setup Utility.
- 53 -
BIOS Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
GA-K8NS Ultra-939 Motherboard
- 54 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4 Technical Reference
TM
@BIOS Introduction
Gigabyte announces @BIOS
Windows BIOS Live Update Utility
Have you ever updated BIOS by yourself? Or like many
other people, you just know what BIOS is, but always
hesitate to update it? Because you think updating new-
est BIOS is unnecessary and actually you don't know
how to update it.
Maybe not like others, you are very experienced in BIOS updating and spend quite a lot of time to do it. But
of course you don't like to do it too much. First, download different BIOS from website and then switch the
operating system to DOS mode. Secondly, use different flash utility to update BIOS. The above process is
not a interesting job. Besides, always be carefully to store the BIOS source code correctly in your disks as if
you update the wrong BIOS, it will be a nightmare.
Certainly, you wonder why motherboard vendors could not just do something right to save your time and
effort and save you from the lousy BIOS updating work? Here it comes! Now Gigabyte announces @BIOS -
- the first Windows BIOS live update utility. This is a smart BIOS update software. It could help you to
download the BIOS from internetand update it. Not like the other BIOS update software, it's a Windows
utility. With the help of "@BIOS", BIOS updating is no more than a click.
Besides, no matter which mainboard you are using, if it's a Gigabyte's product, @BIOS help you to maintain
the BIOS. This utility could detect your correct mainboard model and help you to choose the BIOS accordingly.
It then downloads the BIOS from the nearest Gigabyte ftp site automatically. There are several different
choices; you could use "Internet Update" to download and update your BIOS directly. Or you may want to
keep a backup for your current BIOS, just choose "Save Current BIOS" to save it first. You make a wise
choice to use Gigabyte, and @BIOS update your BIOS smartly. You are now worry free from updating wrong
BIOS, and capable to maintain and manage your BIOS easily. Again, Gigabyte's innovative product erects a
milestone in motherboard industries.
For such a wonderful software, how much it costs? Impossible! It's free! Now, if you buy a Gigabyte's
motherboard, you could find this amazing software in the attached driver CD. But please remember, con-
nected to internet at first, then you could have a internet BIOS update from your Gigabyte @BIOS.
- 55 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Flash BIOS Method Introduction
Method 1 : Dual BIOS/ Q-Flash
A. What is Dual BIOS Technology?
Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the Main BIOS and the
other is Backup BIOS. Under the normal circumstances, the system works on the Main BIOS. If the Main
BIOS is corrupted or damaged, the Backup BIOS can take over while the system is powered on. This means
that your PC will still be able to run stably as if nothing has happened in your BIOS.
B. How to use Dual BIOS and Q-Flash Utility?
1.) After power on the computer, pressing <Del> immediately during POST (Power On Self Test) it will allow
you to enter Award BIOS CMOS SETUP, then press <F8> to enter Flash utility.
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
`
`
`
`
`
`
`
Standard CMOS Features
Advanced BIOS Features
Integrated Peripherals
Select Language
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Power Management Setup
PnP/PCI C
PC Health Status
Enter Dual BIOS/Q-Flash Utility (Y/N)? Y
Save & Exit Setup
Exit Without Saving
MB Intelligent Tweaker(M.I.T.)
ESC: Quit
F8: Dual BIOS/Q-Flash
F3: Change Language
F10: Save & Exit Setup
2.) Award Dual BIOS Flash ROM Programming Utility
Dual BIOS Utility V1.33
Boot From.......................................................................... Main Bios
Main ROM Type/Size......................................................... SST 39SF040
Backup ROM Type/Size..................................................... SST 39SF040
Wide Range Protection Disable
Boot From Main Bios
512K
512K
Auto Recovery Enable
Halt On Error Disable
Keep DMI Data Enable
Copy Main ROM Data to Backup
Load Default Settings
Save Settings to CMOS
Q-Flash Utility
Update Main BIOS from Floppy
Update Backup BIOS from Floppy
Save Main BIOS to Floppy
Save Backup BIOS to Floppy
PgDn/PgUp: Modify
KL: Move
ESC: Reset
F10: Power Off
GA-K8NS Ultra-939 Motherboard
- 56 -
Download from Www.Somanuals.com. All Manuals Search And Download.
3.) Dual BIOS Item explanation:
• Wide Range Protection: Disable(Default), Enable
Status 1:
If any failure (ex. Update ESCD failure, checksum error or reset…) occurs in the Main BIOS, just before
the Operating System is loaded and after the power is on, and that the Wide Range Protection is set to
"Enable", the PC will boot from Backup BIOS automatically.
Status 2:
If the ROM BIOS on peripherals cards(ex. SCSI Cards, LAN Cards...) emits signals torequest restart of
the system after the user make any alteration on it, the boot up BIOS will not be changed to the Backup
BIOS.
• Boot From : Main BIOS(Default), Backup BIOS
Status 1: The user can set to boot from main BIOS or Backup BIOS.
Status 2: If one of the main BIOS or the Backup BIOS fails, this item "Boot From : Main BIOS(Default)"
will become gray and will not be changed by user.
• Auto Recovery : Enable(Default), Disable
When one of the Main BIOS or Backup BIOS occurs checksum failure, the working BIOS will automati-
cally recover the BIOS of checksum failure.
(In the Power Management Setup of the BIOS Setting, if ACPI Suspend Type is set to Suspend to RAM,
the Auto Recovery will be set to Enable automatically.)
(If you want to enter the BIOS setting, please press"Del" key when the boot screen appears.)
• Halt On Error : Disable(Default), Enable
If the BIOS occurs a checksum error or the Main BIOS occurs a WIDE RANGE PROTECTION error and
Halt On Error set to Enable, the PC will show messages on the boot screen, and the system will pause
and wait for the user's instruction.
If Auto Recovery :Disable, it will show <or the other key to continue.>
If Auto Recovery :Enable, it will show <or the other key to Auto Recover.>
• Keep DMI Data : Enable(Default), Disable
Enable: The DMI data won't be replaced by flashing new BIOS.(recommend)
Disable: The DMI data will be replaced by flashing new BIOS.
• Copy Main ROM Data to Backup
(If you boot from Backup ROM, this item will change to "Copy Backup ROM Data to Main")
Auto recovery message:
BIOS Recovery: Main to Backup
The means that the Main BIOS works normally and could automatically recover the Backup BIOS.
BIOS Recovery: Backup to Main
The means that the Backup BIOS works normally and could automatically recover the Main BIOS. (This
auto recovery utility is set by system automatically and can't be changed by user.)
• Load Default Settings
Load dual BIOS default value.
• Save Settings to CMOS
Save revised setting.
- 57 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
C. What is Q-Flash Utility?
Q-Flash utility is a pre-O.S. BIOS flash utility enables users to update its BIOS within BIOS mode, no more
fooling around any OS.
D. How to use Q-Flash?
Update Main BIOS from Floppy / Update Backup BIOS from Floppy
ꢀ In the A: drive, insert the "BIOS" diskette, then Press Enter to Run.
1 File(s) found
XXXX.XX
512K
Total Size: 1.39M
F5: Refresh
Free Size: 911.50K
DEL: Delete ESC: Return Main
Where XXXX.XX is name of the BIOS file.
ꢀ Press Enter to Run.
ꢀ Press Enter to Run.
Are you sure to update BIOS?
[Enter] to contiune Or [ESC] ot abort...
!! COPY BIOS Completed - Pass !!
Please press any key to continue
Congratulation! You have completed the flashed and now can restart system.
Save Main BIOS to Floppy / Save Backup BIOS to Floppy
ꢀ In the A:drive, insert the floppy disk, then Press Enter to Run.
TYPE FILE NAME
File name: XXXX.XX
Total Size: 1.39M
F5: Refresh
Free Size: 911.50K
DEL: Delete TAB: Switch
To name the file.
Congratulate you have accomplished the saving.
CONTROL KEYS
<PgDn/PgUp>
<Ç>
Make changes
Move to previous item
Move to next item
Run
<È>
<Enter>
<Esc>
Reset
<F10>
Power Off
GA-K8NS Ultra-939 Motherboard
- 58 -
Download from Www.Somanuals.com. All Manuals Search And Download.
DualBIOS™ Technology FAQ
GIGABYTE Technology is pleased to introduce DualBIOS technology, a hot spare for
your system BIOS. This newest "Value-added" feature, in a long series of innovations from
GIGABYTE, is available on this motherboard. Future GIGABYTE motherboards will also incorpo-
rate this innovation.
What's DualBIOS™?
On GIGABYTE motherboards with DualBIOS there are physically two BIOS chips. For simplicity
we'll call one your "Main BIOS" and the other we'll call your "Backup BIOS" (your "hot spare"). If your Main
BIOS fails, the Backup BIOS almost automatically takes over on your next system boot.
Almost automatically and with virtually zero down time! Whether the problem is a failure in flashing your
BIOS or a virus or a catastrophic failure of the Main BIOS chip, the result is the same - the Backup BIOS
backs you up, almost automatically.
I. Q: What is DualBIOS™ technology?
Answer:
DualBIOS technology is a patented technology from Giga-Byte Technology. The concept of this
technology is based on the redundancy and fault tolerance theory. DualBIOS™ technology simply means
there are two system BIOSes (ROM) integrated onto the motherboard. One is a main BIOS, and the other is
a backup BIOS. The mainboard will operate normally with the main BIOS, however, if the main BIOS is
corrupt or damaged for various reasons, the backup BIOS will be automatically used when the system pow-
ered-On. Your PC will operate as before the main BIOS was damaged, and is completely transparent to the
user.
II. Q: Why does anyone need a motherboard with DualBIOS™ technology?
Answer:
In today's systems there are more and more BIOS failures. The most common reasons are virus attacks,
BIOS upgrade failures, and/or deterioration of the BIOS (ROM) chip itself.
1. New computer viruses are being found that attack and destroy the system BIOS. They may corrupt
your BIOS code, causing your PC to be unstable or even not boot normally.
2. BIOS data will be corrupted if a power loss/surge occurs, or if a user resets the system, or if the power
button is pressed during the process of performing a system BIOS upgrade.
3. If a user mistakenly updates their mainboard with the incorrect BIOS file, then the system may not be
able to boot correctly. This may cause the PC system hang in operation or during boot.
4. A flash ROM's life cycle is limited according to electronic characteristics. The modern PC utilizes the
Plug and Play BIOS, and is updated regularly. If a user changes peripherals often, there is a slight
chance of damage to the flash ROM.
With Giga-Byte Technology's patented DualBIOS™ technology you can reduce the possibility of hangs during
system boot up, and/or loss BIOS data due to above reasons.
This new technology will eliminate valuable system down time and costly repair bills cause by BIOS failures.
- 59 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
III. Q: How does DualBIOS™ technology work?
Answer:
This new technology will eliminate valuable system down time and costly repair bills cause by BIOS
failures.
1. DualBIOS™ technology provides a wide range of protection during the boot up procedure. It protects
your BIOS during system POST, ESCD update, and even all the way to PNP detection/assignment.
2. DualBIOS™ provides automatic recovery for the BIOS. When the first BIOS used during boot up does
not complete or if a BIOS checksum error occurs, boot-up is still possible. In the DualBIOS™ utility, the
"Auto Recovery" option will guarantee that if either the main BIOS or backup BIOS is corrupted, the
DualBIOS™ technology will use the good BIOS and correct the wrong BIOS automatically.
3. DualBIOS™ provides manual recovery for the BIOS. DualBIOS™ technology contains a built-in flash
utility, which can flash your system BIOS from backup to main and/or visa versa. There is no need for
an OS-dependent flash utility program.
4. DualBIOS™ contains a one-way flash utility. The built-in one-way flash utility will ensure that the corrupt
BIOS is not mistaken as the good BIOS during recovery and that the correct BIOS (main vs. backup)
will be flashed. This will prevent the good BIOS from being flashed.
IV. Q: Who Needs DualBIOS™ technology?
Answer:
This new technology will eliminate valuable system down time and costly repair bills cause by BIOS failures.
1. Every user should have DualBIOS™ technology due to the advancement of computer viruses. Everyday,
there are new BIOS-type viruses discovered that will destroy your system BIOS. Most commercial
products on the market do not have solutions to guard against this type of virus intrusion. The DualBIOS™
technology will provide a state-of-the-art solution to protect your PC:
Case I.) Vicious computer viruses may wipe out your entire system BIOS. With a conventional single
system BIOS PC, the PC will not be functional until it is sent for repairs.
Case II.) If the "Auto Recovery" option is enabled in the DualBIOS™ utility, and if a virus corrupts your
system BIOS, the backup BIOS will automatically reboot the system and correct the main BIOS.
Case III.) A user may override booting from the main system BIOS. The DualBIOS™ utility may be en-
tered to manually change the boot sequence to boot from the backup BIOS.
2. During or after a BIOS upgrade, if DualBIOS™ detects that the main BIOS is corrupt, the backup BIOS
will take over the boot-up process automatically. Moreover, it will verify the main and backup BIOS
checksums when booting-up. DualBIOS™ technology examines the checksum of the main and backup
BIOS while the system is powered on to guarantee your BIOS operates properly.
3. Power Users will have the advantage of having two BIOS versions on their mainboard. The benefit is
being able to select either version BIOS to suit the performance system needs.
4. Flexibility for high-end desktop PCs and workstation/servers. In the DualBIOS™ utility, the
option can be set, "Halt On When BIOS Defects" to be enabled to halt your system with awarning
message that the main BIOS has been corrupted. Most workstation/servers require constant operation
to guarantee services have not been interrupted. In this situation, the "Halt On When BIOS Defects"
message may be disabled to avoid system pauses during normal booting.
Another advantage you gain from Giga-Byte's DualBIOS™ technology is the ability to upgrade from
GA-K8NS Ultra-939 Motherboard
- 60 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Method 2 : @BIOS™ Utility
If you don't have DOS boot disk, we recommend that you used Gigabyte @BIOS™ program to flash BIOS.
Press here.
2. Click Start/ Programs/ GIGABYTE/
@BIOS.
1. Click "@BIOS" item.
(1)
(2)
Click here
3.Click "3"
4. Please select @BIOS sever site,
then Click "OK".
(4)
(3)
Methods and steps:
1. Update BIOS through Internet:
a. Click "Internet Update" icon
b. Click "Update New BIOS" icon
c. Select @BIOS™ sever
d. Select the exact model name on your motherboard
e. System will automatically download and update the BIOS.
2. Update BIOS NOT through Internet:
a. Do not click "Internet Update" icon
b. Click "Update New BIOS"
c. Please select "All Files" in dialog box while opening the old file.
d. Please search for BIOS unzip file, downloading from internet or any other methods.
(such as: K8NSU939.E1).
e. Complete update process following the instruction.
- 61 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Save BIOS
In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the current
BIOS version.
4. Check out supported motherboard and Flash ROM:
In the very beginning, there is "About this program" icon shown in dialog box. It can help you check out
which kind of motherboard and which brand of Flash ROM are supported.
Note:
a. In method I, if it shows two or more motherboard's model names to be selected, please make sure your
motherboard's model name again. Selecting wrong model name will cause the system unbooted.
b. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your motherboard's.
Otherwise, your system won't boot.
c. In method I, if the BIOS file you need cannot be found in @BIOS™ server, please go onto Gigabyte's web
site for downloading and updating it according to method II.
d. Please note that any interruption during updating will cause system unbooted.
GA-K8NS Ultra-939 Motherboard
- 62 -
Download from Www.Somanuals.com. All Manuals Search And Download.
2- / 4- / 6- / 8- Channel Audio
Function Introduction
The installation of windows 98SE/2K/ME/XP is very simple. Please follow next step to install the
function!
Stereo Speakers Connection and Settings:
We recommend that you use the speaker with amplifier to acquire the best sound effect if the stereo output is
applied.
STEP 1:
Connect the stereo speakers or earphone to "Line
Out".
Line Out
STEP 2 :
Following installation of the audio driver, you find a
icon a Sound Effect
icon on the lower right hand
taskbar. Click the icon to select the function.
STEP 3:
Click "Speaker Configuration" then click on the left
selection bar and select "2CH Speaker" to complete
2 channel audio configuration.
- 63 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Channel Analog Audio Output Mode
STEP 1 :
Connect the front channels to "Line Out", the rear
channels to "Line In".
Line Out Line In
STEP 2 :
Following installation of the audio driver, you find a
icon a Sound Effect
icon on the lower right hand
taskbar. Click the icon to select the function.
STEP 3 :
Click "Speaker Configuration" and select the "UAJ
Function". Then click on the left selection bar and
select "4CH Speaker" to complete 4 channel audio
configuration.
GA-K8NS Ultra-939 Motherboard
- 64 -
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Channel Analog Audio Output Mode
Use the back audio panel to connect the audio output
without any additional module.
STEP 1 :
Connect the front channels to "Line Out",the rear
channels to "Line In", and the Center/Subwoofer chan-
nels to "MIC In".
Line In
MIC In Line Out
STEP 2 :
Following installation of the audio driver, you find a
icon a Sound Effect
icon on the lower right hand
taskbar. Click the icon to select the function.
STEP 3 :
Click "Speaker Configuration" and select the "UAJ
Function". Then click on the left selection bar and
select "6CH Speaker" to complete 6 channel audio
configuration.
- 65 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Channel Audio Setup (using Audio Combo Kit, Optional Device):
Audio Combo Kit offers SPDIF output, an optical and
coaxial cable and a Surround-Kit. The Surround-Kit
offers R/L surround, center/subwoofer output and rear
surround.
STEP 1 :
Secure the Audio Combo Kit at the panel on the back
of the case.
STEP 2 :
Connect the Surround-Kit to the SUR_CEN connector located on the motherboard.
STEP 3 :
There are two methods of 8 channel audio
configuration:
Method 1:
Connect the front channels to the "LINE OUT" port
located on the audio panel and the rear channels
to the Surround-Kit "REAR R/L" port. Connect the
center/subwoofer channels to the Surround-Kit
"SUB CENTER" and the R/L channels to the Sur-
round-Kit "SUR BACK" port.
GA-K8NS Ultra-939 Motherboard
- 66 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Method 2:
Connect the front channels to the "LINE OUT" port
located on the audio panel and the rear channels
to the "LINE IN" port. Connect the center/subwoofer
channels to the "MIC IN" port located on the audio
panel and the R/L channels to the Surround-Kit
"SUR BACK" port. (This method requires UAJ
function)
STEP 4 :
Following installation of the audio driver, you find a
icon a Sound Effect
icon on the lower right hand
taskbar. Click the icon to select the function.
STEP 5 :
Click "Speaker Configuration" and select both the
"UAJ Function" and "Only Surround-Kit". Then click
on the left selection bar and select "8CH Speaker" to
complete 8 channel audio configuration.
Sound Effect Configuration:
At the sound effect menu, users can adjust
sound option settings as desired.
- 67 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
SPDIF Output Device (Optional Device)
A "SPDIF output" device is available on the
motherboard. Cable with rear bracket is provided and
could link to the "SPDIF output" connector (As picture.)
For the further linkage to decoder, rear bracket pro-
vides coaxial cable and Fiber connecting port.
1. Connect the SPDIF output device to the rear
bracket of PC, and fix it with screw.
2. Connect SPDIF device to the motherboard.
3. Connect SPDIF to the SPDIF decoder.
GA-K8NS Ultra-939 Motherboard
- 68 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Jack-Sensing and UAJ Introduction
Jack-Sensing provides audio connectors error-detection function.
Install Microsoft DirectX8.1 or later version before to enable Jack-Sensing support for Windows 98/
98SE/2000/ME.
Jack-Sensing includes 2 parts: AUTO and MANUAL. Following is an example for 2 channels (Windows XP):
Introduction of audio connectors
You may connect CDROM, Walkman or others audio
input devices to Line In jack, speakers, earphone or
others output devices to Line Out jack, and micro-
phone to MIC In jack.
Auto-detecting:
Please connect the devices to the right jacks as
above. A window will appear as right picture if
you setup the devices properly.
Please note that 3D audio function will only
appear when 3D audio inputs.
- 69 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
If you set wrong with the connectors, the warning
message will come out as right picture.
Manual setting:
If the device picture shows different from what you
set, please press "Manual Selection" to set.
UAJ Introduction
UAJ (Universal Audio Jack) has a very smart feature: It will switch signal automatically when user plugs his
audio device to the wrong jack (Line-in/ Line-out). That means users do not need to worry the audio device
should be plug in Line-in or Line-out jack, the device will work perfectly after UAJ is activated.
Enable UAJ function:
You can click "UAJ Automatic" button to enable UAJ
function.
GA-K8NS Ultra-939 Motherboard
- 70 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Xpress Recovery Introduction
What is Xpress Recovery ?
Xpress Recovery is a utility used to back up and restore an OS partition. If the hard drive is
not working properly, the user can restore the drive to its original state.
1. Supports FAT16, FAT32, and NTFS formats
2. Must be connected to the IDE1 Master
3. Allows installation of only one OS
4. Must be used with an IDE hard disk supporting HPA
5. The first partition must be set as the boot partition. When the boot partition is backed up,
please do not alter its size.
6. Xpress Recovery is recommended when using Ghost to return boot manager to NTFS
format.
How to use the Xpress Recovery
1. Boot from CD-ROM (BMP Mode)
Enter the BIOS menu, select "Advanced BIOS Feature" and set to boot from CD-ROM. Insert
the provided driver CD into your CD drive, then save and exit the BIOS menu. Once the computer
has restarted, the phrase "Boot from CD:" will appear at the bottom left-hand corner of the screen.
When "Boot from CD:" appears, press any key to enter Xpress Recovery. Once you have completed
this step, subsequent access to Xpress Recovery can also function by pressing the F9 key during
computer power on.
.
.
Verifying DMI Pool Data
Boot from CD:
Boot from CD:
Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.
1. Execute Backup Utility
2. Execute Restore Utility
3. Remove Backup Image
4. Set Password
5. Exit and Restart
Build 2011
- 71 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press F9 during powering on the computer. (Text Mode)
Press F9 during powering on the computer.
Award Modular BIOS v6.00PG, An Energy Star Al ly
Copyright (C) 1984-2002, Award Software, Inc.
Intel 865PE AGPSet BIOS for 8IPE1000MT F1
Check System Health OK
.
.
.
Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery
08/16/2002-I845GE-6A69YG01C-00
F9 For Xpress Recovery
Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.
1. Execute Backup Utility
2. Execute Restore Utility
3. Remove Backup Image
4. Set Password
5. Exit and Restart
1. If you have already entered Xpress Recovery by booting from the CD-ROM, you can
enter Xpress Recovery in the future by pressing the F9 key.
2. System storage capacity as well as drive reading/writing speed will affect backup speed.
3. It is recommended that Xpress Recovery be immediately installed after OS and all
required driver and software installations are complete.
GA-K8NS Ultra-939 Motherboard
- 72 -
Download from Www.Somanuals.com. All Manuals Search And Download.
1. Execute Backup Utility:
ꢀ Press B to Backup your System or Esc to Exit
The backup utility will automatically scan your system and back up data as a backup image in
your hard drive.
Not all systems support access to Xpress Recovery by pressing the F9 key during computer
power on. If this is the case, please use the boot from CD-ROM method to enter Xpress
Recovery.
2. Execute Restore Utility:
ꢀ This program will recover your system to factory default.
Press R to restore your system back to factory default or press Esc to exit
Restores backup image to original state.
3. Remove Backup Image:
ꢀ Remove backup image. Are you sure? (Y/N)
Remove the backup image.
4. Set Password:
ꢀ Please input a 4-16 character long password (a-z or 0-9) or press Esc to exit
You can set a password to enter Xpress Recovery to protect your hard disk data. Once this is
done, password input will be required to enter Xpress Recovery during the next as well as
subsequent system restarts. If you wish to remove the need for password entry, please select
"Set Password" and under "New Password/Confirm Password", make sure there is no entry
and then press "Enter" to remove password requirement.
5. Exit and Restart:
Exit and restart your computer.
- 73 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Serial ATA BIOS Setting Utility Introduction
RAID Levels
RAID (Redundant Array of Independent Disks) is a method of combining two hard disk drives into one
logical unit. The advantage of an Array is to provide better performance or data fault tolerance. Fault
tolerance is achieved through data redundant operation, where if one drives fails, a mirrored copy of the
data can be found on another drive. This can prevent data loss if the operating system fails or hangs.
The individual disk drives in an array are called members. The configuration information of each
member is recorded in the reserved sector that identifies the drive as a member. All disk members in
a formed disk array are recognized as a single physical drive to the operating system.
Hard disk drives can be combined together through a few different methods. The different methods are
referred to as different RAID levels. Different RAID levels represent different performance levels,
security levels and implementation costs. The RAID levels which the nVIDIA nForce3 Ultra chipset
supports are RAID 0, RAID 1, RAID 0+1 and JBOD.
RAID 0 (Striping)
RAID 0 reads and writes sectors of data interleaved between multiple drives. If any disk member fails,
it affects the entire array. The disk array data capacity is equal to the number of drive members times
the capacity of the smallest member. The striping block size can be set from 4KB to 64KB. RAID 0 does
not support fault tolerance.
RAID 1 (Mirroring)
RAID 1 writes duplicate data onto a pair of drives and reads both sets of data in parallel. If one of the
mirrored drives suffers a mechanical failure or does not respond, the remaining drive will continue to
function. Due to redundancy, the drive capacity of the array is the capacity of the smallest drive.
Under a RAID 1 setup, an extra drive called the spare drive can be attached. Such a drive will be
activated to replace a failed drive that is part of a mirrored array. Due to the fault tolerance, if any RAID
1 drive fails, data access will not be affected as long as there are other working drives in the array.
RAID 0+1 (Striping + Mirroring)
RAID 0+1 combines the performance of data striping (RAID 0) and the fault tolerance of disk mirroring
(RAID 1). Data is striped across multiple drives and duplicated on another set of drives.
JBOD (Spanning)
A spanning disk array is equal to the sum of the all drives when the drives used are having different
capacities. Spanning stores data onto a drive until it is full, then proceeds to store files onto the next
drive in the array. When any disk member fails, the failure affects the entire array. JBOD is not really
a RAID and does not support fault tolerance.
GA-K8NS Ultra-939 Motherboard
- 74 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Please follow the steps below to construct a complete RAID array:
1) Have ready your hard drives for RAID construction.
Note: To achieve best performance, it is recommended that the hard drives used are of similar make
and storage capacity.
2) Please attach the hard drive connectors to their appropriate location on the motherboard ie. IDE,
SCSI, or SATA.
3) Enter the motherboard BIOS and locate RAID setup (Please refer to the section on Integrated
Peripherals).
4) Enter RAID setup in the BIOS and select the RAID type (For instance, enter F10 to select NVIDIA
RAID; Ctrl + S to select Silicon Image).
5) Complete driver installation.
6) Complete RAID utility installation.
More information on steps 4 and 5 is provided. (For more detailed setup information, please visit our
website at http:\\www.gigabyte.com.tw)
Configuring the NVIDIA RAID BIOS
The NVRAID BIOS setup lets you choose the RAID array type and which hard drives you want to make
part of the array.
Entering the RAID BIOS Setup
1. After rebooting your computer, wait until you see the RAID software prompting you to press F10. The
RAID prompt appears as part of the system POST and boot process prior to loading the OS. You have
a few seconds to press F10 before the window disappears.
NVIDIA RAID IDE ROM BIOS 4.22
Copyright (C) 2003 NVIDIA Corp.
Detecting array ...
Press F10 to enter RAID setup utility ...
2. Press F10.
The NVIDIA RAID Utility - Define a New Array window appears (as Figure below).
NVDIA RAID Utility Feb 13 2004
- Define a New Array -
RAID Mode: Mirroring
Free Disks
Striping Block: Optimal
Array Disks
Loc
Disk Model Name
Loc
Disk Model Name
1.0.M ST3120026AS
1.1.M ST3120026AS
[J] Add
[I] Del
[F6] Back [F7] Finish [TAB] Navigate [KL] Select [ENTER] Popup
- 75 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the "Define a New Array" Window
If necessary, press the tab key to move from field to field until the appropriate field is highlighted.
Selecting the RAID Mode
By default, this is set to Mirroring. To change to a different RAID mode, press the down arrow key until
the mode that you want appears in the RAID Mode box - either Mirroring, Striping, Spanning, or Stripe
Mirroring.
Selecting the Striping Block Size
Striping block size is given in kilobytes, and affects how data is arranged on the disk. It is recom-
mended to leave this value at the default Optimal, which is 32KB, but the values can be between 4 KB
and 128 KB.
Assigning the Disks
The disks that you enabled from the RAID Config BIOS setup page appear in the Free Disks block.
These are the drives that are available for use as RAID array disks. To designate a free disk to be used
as a RAID array disk,
1. Tab to the Free Disks section. The first disk in the list is selected.
2. Move it from the Free Disks block to the Array Disks block by pressing the rightarrow key (J). The
first disk in the list is moved, and the next disk in the list is selected and ready to be moved.
3. Continue pressing the right-arrow key (J) until all the disks that you want to use as RAID array disks
appear in the Array Disks block.
NVDIA RAID Utility Feb 13 2004
- Define a New Array -
RAID Mode: Mirroring
Free Disks
Striping Block: Optimal
Array Disks
Loc
Disk Model Name
Loc
Disk Model Name
1.0.M ST3120026AS
1.1.M ST3120026AS
[J] Add
[I] Del
[F6] Back [F7] Finish [TAB] Navigate [KL] Select [ENTER] Popup
Completing the RAID BIOS Setup
After assigning your RAID array disks, press F7. The Clear disk data prompt appears.
NVDIA RAID Utility Feb 13 2004
- Define a New Array -
RAID Mode: Mirroring
Free Disks
Striping Block: Optimal
Clear disk data ?
Loc
Disk Model Name
k Model Name
3120026AS
3120026AS
[Y] YES [N] NO
[I] Del
[F6] Back [F7] Finish [TAB] Navigate [KL] Select [ENTER] Popup
GA-K8NS Ultra-939 Motherboard
- 76 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Press Y if you want to wipe out all the data from the RAID array, otherwise press N. You must choose
Yes if the drives were previously used as RAID drives. The Array List window appears, where you
can review the RAID arrays that you have set up.
You can select a disk array as boot device if you want to boot operating system from an array. Use the
arrow keys to select the array, then press B to specify the array as bootable.
NVDIA RAID Utility Feb 13 2004
- Array List -
Boot
BBS
Id Status
Health
Vendor Array Model Name
NVIDIA MIRROR 111.79G
2
[Ctrl-X] Exit [KL] Select [B] Set Boot [N] New Array [ENTER] Detail
Press Enter to view and verify details. The Array Detail screen appears.
The Array Detail screen shows various information about the array that you selected, such as Striping
Block used, RAID Mode, Striping Width, Disk Model Name, and disk capacity.
Array 2 : NVIDIA MIRROR 111.79G
- Array Detail -
RAID Mode: Mirroring
Striping Width : 1
Striping Block 32K
Adapt Channel M/S
Index
Disk Model Name
Capacity
1
1
0
1
Master
Master
0
1
ST3120026AS
ST3120026AS
111.79GB
111.79GB
[R] Rebuild [D] Delete [C] Clear Disk [ENTER] Return
If you want to mark this disk as empty and wipe out all its contents, press C.
At the prompt, press Y to wipe out all the data, otherwise press N.
Press Enter again to go back to the previous screen and then press Ctrl + X to exit the RAID setup.
Now that the RAID setup has been configured from the RAID BIOS, the next step is to configure and load
drivers under Windows.
- 77 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing the RAID drivers
For the Windows operating system (Win NT, WinXP, Win2000 ), for IDE RAID/SCSI/Serial ATA functioning,
the driver must first be transferred to a floppy disk. Please follow the steps below to complete driver
transfer to a floppy disk:
1) Please insert the provided driver CD into the hard disk drive eg. Drive D:
2) Insert a blank formatted floppy disk into the floppy disk drive.
3) Either from "Command Prompt" or DOS, please type in "D:\BootDrv\menu.exe"(Refer to Fig.1)
4) Information on all chipsets should be listed on the screen (Refer to Fig.2), please select the proper
chipset model.
Fig.1
Fig.2
(Note)
Your system will then automatically zip and transfer this driver file to the floppy disk.
After you complete the steps, boot from the Windows CD to install the RAID drivers.
When install Windows 2000 or Windows XP from HDDs in serial ATA controller, press F6 as Win2000
or XP boots up, then supply serial ATA controller driver by this floppy disk. Follow on-screen instruc-
tions to complete installation.
(Each time you add a new hard drive to a RAID array, the RAID driver will have to be installed under
Windows once for that hard drive. After that, the driver will not have to be installed.)
Note: In the menu list, IAA_RAID is Intel ICH5R chipset.
GA-K8NS Ultra-939 Motherboard
- 78 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- 79 -
Technical Reference
Download from Www.Somanuals.com. All Manuals Search And Download.
GA-K8NS Ultra-939 Motherboard
- 80 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5 Appendix
Install Drivers
Pictures below are shown in Windows XP
Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver
CD-title will auto start and show the installation guide. If not, please double click the CD-ROM
device icon in "My computer", and execute the setup.exe.
INSTALL CHIPSET DRIVER
This page shows the drivers that need to be installed for the system. Click each item to install the driver
manually or switch to the to install the drivers automatically.
The "Xpress Install" uses the"Click and Go" technology to install the drivers automatically. Just select the
drivers you want then click the "GO" button. The
will execute the installation for you automatically.
Massage: Some device drivers will restart your
system automatically. After restarting your system the
"Xpress Install" will continue to install other drivers.
We recommend that you install all components in the list.
- 81 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
Driver installation finished !
You have to reboot system !
Item Description
„
„
„
„
„
„
nVIDIA System Driver
For nVIDIA chipset driver.
USB Patch for WinXP
This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP.
Marvell 10/100/1000 Base LAN Driver
For Marvell 10/100/1000 LAN chip driver.
RealTek AC97 Codec Driver
Realtek audio driver.
Silicon Image RAID Driver
Serial-ATA RAID driver for Silicon Image.
nVIDIA USB 2.0 Driver
For nVIDIA USB 2.0 enhanced host controller.
For USB2.0 driver support under Windows XP operating system, please use Windows Service
Pack. After install Windows Service Pack, it will show a question mark "?" in "Universal Serial Bus
controller" under "Device Manager". Please remove the question mark and restart the system
(System will auto-detect the right USB2.0 driver).
GA-K8NS Ultra-939 Motherboard
- 82 -
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE APPLICATION
This page reveals the value-added software developed by Gigabyte and its worldwide partners.
„
„
„
„
„
„
„
„
„
„
Gigabyte Windows Utilities Manager (GWUM)
This utility can integrate the Gigabyte's applications in the system tray.
Gigabyte Management Tool (GMT)
A useful tool which can manage the computer via the network.
EasyTune 4
Powerful utility that integrates the overclocking and hardware monitoring functions.
DMI Viewer
Windows based utility which is used to browse the DMI/SMBIOS information of the system.
Face-Wizard
New utility for adding BIOS logo.
@BIOS
Gigabyte windows flash BIOS utility.
Acrobat e-Book
Useful utility from Adobe.
Acrobat Reader
Popular utility from Adobe for reading .PDF file format documents.
Norton Internet Security (NIS)
Integrated utility which includes anti-virus, ads, etc.
DirectX 9
Install Microsoft DirectX 9 to enable 3D hardware acceleration that support for operating system to
achieve better 3D performence.
„
Silicon Image SATA RAID Utility
RAID utility for Silicon Image Serial-ATA function.
- 83 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
SOFTWARE INFORMATION
This page list the contects of softwares and drivers in this CD title.
HARDWARE INFORMATION
This page lists all device you have for this motherboard.
CONTACT US
Please see the last page for details.
GA-K8NS Ultra-939 Motherboard
- 84 -
Download from Www.Somanuals.com. All Manuals Search And Download.
FAQ
Below is a collection of general asked questions. To check general asked questions based on a specific motherboard
Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why?
Answer: Some advanced options are hidden in new BIOS version. Please press Ctrl and F1 keys after entering
BIOS menu and you will be able to see these options.
Questions 2: Why is the light of my keyboard/optical mouse still on after computer shuts down?
Answer: In some boards, a small amount of electricity is kept on standby after computer shuts down and that's why
the light is still on.
Question 3: Why cannot I use all functions in EasyTune 4?
Answer: The availability of the listed functions in EasyTune 4 depends on the MB chipset. If the chipset doesn't
support certain functions in EasyTune 4, these functions will be locked automatically and you will not be able to use
them.
Question 4: Why do I fail to install RAID and ATA drivers under Win 2000 and XP on boards that support RAID
function after I connect the boot HDD to IDE3 or IDE4 ?
Answer: First of all, you need to save some files in the CD-ROM to a floppy disk before installing drivers. You also
need to go through some rather different steps in the installation process. Therefore, we suggest that you refer to
the installation steps in the RAID manual at our website.
(Please download it at http://tw.giga-byte.com/support/user_pdf/raid_manual.pdf)
Question 5: How do I clear CMOS?
Answer: If your board has a Clear CMOS jumper, please refer to the Clear CMOS steps in the manual. If your board
doesn't have such jumper, you can take off the on-board battery to leak voltage to clear CMOS. Please refer to the
steps below:
Steps:
1. Turn off power.
2. Disconnect the power cord from MB.
3. Take out the battery gently and put it aside for about 10 minutes (Or you can use a
metal object to connect the positive and negative pins in the battery holder to make
them short for one minute).
4. Re-insert the battery to the battery holder.
5. Connect power cord to MB again and turn on power.
6. Press Del to enter BIOS and load Fail-Safe Defaults.
7. Save changes and reboot the system.
Question 6: Why does system seem unstable after updating BIOS?
Answer: Please remember to load Fail-Safe Defaults (Or Load BIOS Defaults) after flashing BIOS. However, if the
system instability still remains, please clear CMOS to solve the problem.
Question 7: Why do I still get a weak sound after turning up the speaker to the maximum volume?
Answer: Please make sure the speaker you are using is equipped with an internal amplifier. If not, please change
another speaker with power/amplifier and try again later.
- 85 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
Question 8: How do I disable onboard VGA card in order to add an external VGA card?
Answer: Gigabyte motherboards will auto-detect the external VGA card after it is plugged in, so you don't need to
change any setting manually to disable the onboard VGA.
Question 9: Why cannot I use the IDE 2?
Answer: Please refer to the user manual and check whether you have connected any cable that is not provided with
the motherboard package to the USB Over Current pin in the Front USB Panel. If the cable is your own cable, please
remove it from this pin and do not connect any of your own cables to it.
Question 10: Sometimes I hear different continuous beeps from computer after system boots up. What do these
beeps usually stand for?
Answer: The beep codes below may help you identify the possible computer problems. However, they are only for
reference purposes. The situations might differ from case to case.
JAMI BIOS Beep Codes
J AWARD BIOS Beep Codes
*Computer gives 1 short beep when system boots successfully.
*Except for beep code 8, these codes are always fatal.
1 beep Refresh failure
1 short: System boots successfully
2 short: CMOS setting error
1 long 1 short: DRAM or M/B error
1 long 2 short: Monitor or display card error
1 long 3 short: Keyboard error
1 long 9 short: BIOS ROM error
Continuous long beeps: DRAM error
Continuous short beeps: Power error
2 beeps Parity error
3 beeps Base 64K memory failure
4 beeps Timer not operational
5 beeps Processor error
6 beeps 8042 - gate A20 failure
7 beeps Processor exception interrupt error
8 beeps Display memory read/write failure
9 beeps ROM checksum error
10 beeps CMOS shutdown register read/write error
11 beeps Cache memory bad
Question 11: For the M/B which have RAID function, how to set in the BIOS in order to bootup from IDE3, 4 by either
RAID or ATA mode?
Answer:Please set in the BIOS as follow:
1. Advanced BIOS features-->(SATA)/RAID/SCSI boot order: "SATA"
2. Advanced BIOS features--> First boot device: "SCSI"
3. Integrated Peripherals--> Onboard H/W ATA/RAID: "enable"
Then it depends on the RAID mode that you need to set "RAID" to RAID mode or "ATA" to normal ATA mode in the
item named RAID controller function.
Question 12: How to set in the BIOS to bootup from the IDE/ SCSI/ RAID card ?
Answer:Please set in the BIOS as follow:
1. Advanced BIOS features-->(SATA)/RAID/SCSI boot order: "SCSI"
2. Advanced BIOS features--> First boot device: "SCSI"
Then it depends on the mode(RAID or ATA) that you need to set in RAID/ SCSI BIOS.
GA-K8NS Ultra-939 Motherboard
- 86 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you encounter any trouble during boot up, please follow the troubleshooting
procedures.
START
Turn off the power and unplug the AC power cable, then remove all
of the add-on cards and cables from motherboard.
Yes
Please isolate
the short pin.
Please make sure motherboard & chassis are not short ?
No
Failure has been excluded.
Make sure the
jumper setting
are correct.
No
Please make sure all jumper settings (such as CPU system bus
speed, frequency ratio, voltage and etc) are set properly.
Yes
Failure has been excluded.
Plug the CPU
cooling fan power
in the CPU fan
connector. Plug in
t h e A C p o w e r
connector.
No
Check if the CPU cooling fan attached to CPU properly. ls
CPU cooling fan power connected to CPU_FAN
properly?
Yes
Failure has been excluded.
Insert and push
No
t h e m e m o r y
module vertically
into the DIMM slot.
Check if the memory install properly into the DIMM slot.
Yes
Failure has been excluded.
Insert the VGA card. Then plug in ATX power cable and
turn on the system.
A
- 87 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
A
The problem could
be caused by power
s u p p l y , C P U ,
memory or CPU/
memory socket
itself.
No
Is memory LED on and CPU fan running?
Yes
Failure has been excluded.
Perhaps your VGA
card / VGA slot or
monitor is defective.
No
Check if there is display.
Yes
Failure has been excluded.
Turn off the system. Reboot after keyboard and mouse have
been plugged in.
It is possible that your
k e y b o a r d o r
keyboard connector
is defective.
No
Check if keyboard is working properly.
Yes
Press <Del> to enter BIOS setup. Choose "Load
Optimized Defaults" and save then exit setup.
Failure has been excluded.
The problem was
probably caused by
No
Turn off the system and re-connect the IDE cable. Check
if the system can reboot successfully.
the IDE device
connector or cable.
/
Yes
Reinstall Windows OS, and reinstall add-on cards and cables.
Then try to reboot the system.
Failure has been excluded.
END
If the above procedure unable to solve your problem, please contact with your local retailer or national
distributor for help. Or, you could submit your question to the service mail via Gigabyte website technical
GA-K8NS Ultra-939 Motherboard
- 88 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support/RMA Sheet
Customer/Country:
Company:
Phone No.:
Contact Person:
E-mail Add. :
Model name/Lot Number:
BIOS version:
PCB revision:
Driver/Utility:
O.S./A.S.:
Hardware
Configuration
CPU
Mfs.
Model name
Size:
Memory
Brand
Video Card
Audio Card
HDD
CD-ROM /
DVD-ROM
Modem
Network
AMR / CNR
Keyboard
Mouse
Power supply
Other Device
Problem Description:
- 89 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Acronyms
Acronyms
ACPI
APM
AGP
Meaning
Advanced Configuration and Power Interface
Advanced Power Management
Accelerated Graphics Port
Audio Modem Riser
AMR
ACR
Advanced Communications Riser
Basic Input / Output System
Central Processing Unit
BIOS
CPU
CMOS
CRIMM
CNR
DMA
DMI
Complementary Metal Oxide Semiconductor
Continuity RIMM
Communication and Networking Riser
Direct Memory Access
Desktop Management Interface
Dual Inline Memory Module
Dual Retention Mechanism
Dynamic Random Access Memory
Double Data Rate
DIMM
DRM
DRAM
DDR
ECP
Extended Capabilities Port
Extended System Configuration Data
Error Checking and Correcting
Electromagnetic Compatibility
Enhanced Parallel Port
ESCD
ECC
EMC
EPP
ESD
Electrostatic Discharge
FDD
Floppy Disk Device
FSB
Front Side Bus
HDD
IDE
Hard Disk Device
Integrated Dual Channel Enhanced
Interrupt Request
IRQ
to be continued......
GA-K8NS Ultra-939 Motherboard
- 90 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Acronyms
IOAPIC
ISA
Meaning
Input Output Advanced Programmable Input Controller
Industry Standard Architecture
Local Area Network
LAN
I/O
Input / Output
LBA
Logical Block Addressing
Light Emitting Diode
LED
MHz
MIDI
MTH
MPT
NIC
Megahertz
Musical Instrument Digital Interface
Memory Translator Hub
Memory Protocol Translator
Network Interface Card
OS
Operating System
OEM
PAC
Original Equipment Manufacturer
PCI A.G.P. Controller
POST
PCI
Power-On Self Test
Peripheral Component Interconnect
Rambus in-line Memory Module
Special Circumstance Instructions
Single Edge Contact Cartridge
Static Random Access Memory
RIMM
SCI
SECC
SRAM
- 91 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
GA-K8NS Ultra-939 Motherboard
- 92 -
Download from Www.Somanuals.com. All Manuals Search And Download.
- 93 -
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
GA-K8NS Ultra-939 Motherboard
- 94 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Contact Us
ꢀ
Taiwan (Headquarters)
ꢀ
Japan
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien,
Taiwan.
NIPPON GIGA-BYTE CORPORATION
ꢀ
Singapore
TEL: +886 (2) 8912-4888
GIGA-BYTE SINGAPORE PTE. LTD.
Tech. Support :
FAX: +886 (2) 8912-4003
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
Non-Tech. Support(Sales/Marketing) :
ꢀ
U.K.
G.B.T. TECH. CO., LTD.
Address: GUnit 13 Avant Business Centre 3 Third Avenue,
Denbigh West Bletchley Milton Keynes, MK1 1DR, UK, England
TEL: +44-1908-362700
ꢀ
U.S.A.
G.B.T. INC.
Address: 17358 Railroad St, City of Industry, CA 91748.
TEL: +1 (626) 854-9338
FAX: +44-1908-362709
Tech. Support :
FAX: +1 (626) 854-9339
Non-Tech. Support(Sales/Marketing) :
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
ꢀ
The Netherlands
GIGA-BYTE TECHNOLOGY B.V.
TEL: +31 40 290 2088
ꢀ
Germany
G.B.T. TECHNOLOGY TRADING GMBH
Address: Friedrich-Ebert-Damm 112 22047 Hamburg
Deutschland
NLTech.Support: 0900-GIGABYTE (0900-44422983)
BE Tech.Support: 0900-84034
FAX: +31 40 290 2089
TEL: +49-40-2533040 (Sales)
Tech. Support :
+49-1803-428468 (Tech.)
Non-Tech. Support(Sales/Marketing) :
FAX: +49-40-25492343 (Sales)
+49-1803-428329 (Tech.)
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
- 95 -
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
ꢁ
China
ꢁ
Australia
NINGBO G.B.T. TECH. TRADING CO., LTD.
Tech. Support :
GIGABYTE TECHNOLOGY PTY. LTD.
Address: 3/6 Garden Road, Clayton, VIC 3168 Australia
TEL: +61 3 85616288
Non-Tech. Support(Sales/Marketing) :
Shanghai
FAX: +61 3 85616222
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
TEL: +86-021-63410999
FAX: +86-021-63410100
Beijing
ꢁ
France
TEL: +86-010-82886651
FAX: +86-010-82888013
Wuhan
GIGABYTE TECHNOLOGY FRANCES S.A.R.L.
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
TEL: +86-027-87851061
FAX: +86-027-87851330
GuangZhou
TEL: +86-020-87586074
FAX: +86-020-85517843
Chengdu
ꢁ
Russia
Moscow Representative Office Of Giga-Byte Technology Co.,
Ltd.
TEL: +86-028-85236930
FAX: +86-028-85256822
Xian
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
TEL: +86-029-85531943
FAX: +86-029-85539821
Shenyang
ꢁ
Poland
TEL: +86-024-23960918
FAX: +86-024-23960918-809
Representative Office Of Giga-Byte Technology Co., Ltd.
POLAND
Tech. Support :
Non-Tech. Support(Sales/Marketing) :
GA-K8NS Ultra-939 Motherboard
- 96 -
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Exabyte Computer Drive EXB 8505 8mm User Manual
Exido Coffeemaker 245 011 012 User Manual
Fisher Price Baby Swing K7923 User Manual
Fisher Price Motorized Toy Car W2602 User Manual
Fujitsu Server C122 H007 01EN User Manual
Furuno Radar Detector FR 7112 User Manual
Garmin Headphones VIB10 11 User Manual
GE Washer WA8600SCL User Manual
Giant Pressure Washer GP7122 User Manual
Gladiator Garageworks Tool Storage 2253694A User Manual