tracer2000
Network Digital Video Recorder
Hardware User’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Copyright Notice
This document may not, in whole or in part, be reproduced or transmitted in any form
or by means, electronic, mechanical, or optical, including photocopying, recording, or
storing in a retrieval system, or translated into any language in any form without the
prior written notice of agreement from us.
Warranties
We make no warranties with respect to this documentation and disclaim any implied
warranties of merchantability and fitness for a particular purpose. We shall not be
liable for any error or for incidental or consequential damages in connection with the
furnishing, performance, or use of this documentation or the examples herein. The
information in this documentation is subject to change without notice.
Trademarks
All other product names mentioned in this documentation are for identification
purposes only and remain the sole property of their respective owners.
Copyright @ 2005 by Giantec Inc.
All Right Reserved.
March 2005, Version 3.1
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Giantec Internet Services
Customer satisfaction is our number one concern. To ensure that customers receive the
full benefit of our products, Giantec Internet Services has been set up to provide technical
support, driver updates, product information, and user’s manual updates. The following
services are provided:
Email for technical support
à
Email: service@giantec.com.tw
World Wide Web (WWW) site for product information
à
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
CHAPTER I
INTRODUCTION
1
Limited Warranty
Function Introduction
Features
1
1
2
CHAPTER II
PACKAGE
3
CHAPTER III
INSTALLATION
4
1.
2.
Indicator
Cable Connection
5
5
2.1
2.2
2.3
2.4
Connect VGA Monitor .............................................................................. 5
Connect Camera Cable to BNC Connector ................................................... 6
Connect to LAN Connector: Plug RJ-45 Connector to LAN Port........................ 6
Connect to Printer Port (Option)................................................................ 7
3.
Power Connector
8
3.1 Connect Power Cord (110V ~ 240V Auto Switch) into the Power Socket .......... 8
CHAPTER IV
PIN ASSIGNMENT
9
9
1.
Internal Jumpers and Connectors
1.1
Power Switch for ATX Power Supply (JP1)..................................................10
Reset / LED / Speaker (JP1) ....................................................................10
Internal USB Connector (USB2) ...............................................................10
Power Connector (P1).............................................................................10
CMOS Clear (J1)....................................................................................10
COM2 Mode Select (JP3).........................................................................11
CPU FSB Select (JP4) .............................................................................11
FAN Control (FAN1, 2) ............................................................................11
HDD Connector (IDE1, 2)........................................................................11
Parallel / Printer Connector (PRN).............................................................12
Video Input (J2) ....................................................................................12
General Purpose Input / Output (J3).........................................................13
Infra-Red (IR) .......................................................................................13
PCI Bus Pin Assignment..........................................................................14
1.2
1.3
1.4
1.5
1.6
1.7
1.8
1.9
1.10
1.11
1.12
1.13
1.14
2.
3.
External Connector
15
CRT Display Connector (VGA) ..................................................................15
Audio Input Connector............................................................................15
2.1
2.2
2.3
2.4
2.5
2.6
GPIO Connector.....................................................................................15
USB Connector......................................................................................15
COM1 Connector....................................................................................16
COM2 Connector....................................................................................16
Ethernet Connector (RJ-45)
17
3.1 Connector.............................................................................................17
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2
3.3
3.4
3.5
P/T/Z Setting ........................................................................................18
Pin Assignment of COM2.........................................................................18
Cable Connection...................................................................................18
Jumper 3 Setting of COM2.......................................................................18
CHAPTER V
CMOS SETTING
19
1.
2.
Introduction
Setup Pages
19
19
2.1
2.2
2.3
2.4
2.5
2.6
2.7
2.8
2.9
2.10
2.11
2.12
Standard CMOS Features ........................................................................20
Advanced BIOS Features.........................................................................21
Advanced Chipset Features......................................................................22
Integrated Peripherals ............................................................................24
Power Management Setup.......................................................................25
PnP / PCI Configuration ..........................................................................26
PC Health Status....................................................................................26
Frequency / Voltage Control ....................................................................27
Load Optimized Defaults .........................................................................27
Supervisor / User Password.....................................................................27
Save & Exit Setup..................................................................................27
Exit Without Save ..................................................................................27
CHAPTER VI
SYSTEM HDD INSTALLATION GUIDE
28
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Chapter I
Introduction
Thank you for purchasing tracer2000 DVR; this manual will guide you through the setup,
installation, and use of all our tracer2000 systems.
Before proceeding, please read this manual thoroughly!
If you have any questions or concerns that cannot be solved by following this manual, please
Limited Warranty
Giantec Inc. warrants this product to be in compliance with its own plans and specifications.
Moreover, to be free from defects in materials and workmanship under normal use and service
for all parts one year after the original purchase date. During this period Giantec Inc. will
replace parts at no charge, however, labor cost will be laid after one year. Please contact
your dealer / distributor for details.
This warranty excludes damages due to misuse or neglect. Also this warranty does not cover
damages beyond DVR’s control. In no event shall Giantec Inc. be liable for any direct,
indirect or consequential damages; loss of anticipated profits, loss of time or any other losses
incurred by the buyer in connection with the purchase, installation, operation or failure of this
product. For more details on the limitation of this warranty, contact your distributor.
Function Introduction
Thank you for using tracer2000 video surveillance system. tracer can be used to transfer
captured video signal from analog to digital using the compression format for record and play.
They can also capture videos of up to 4 / 8 / 16 cameras for model tracer2404, tracer2408 and
trcer2416 (4 / 8 / 16 BNC inputs) with 4 audio sources at the same time. The built-in video
player makes it easy to play back recorded video files. The system also provides several
control modes like motion detection, schedule record, P/T/Z control and remote surveillance
applications. About detail function describe, please reference tracer2000 software manual.
Version 3.1
Page 1 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Features
The tracer2000 comes with the following hardware devices:
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
Control Panel with IR Receiver
One 10/100Mbps TX Fast Ethernet with RJ-45 Connector
One RS232 and one RS232/422/485 Selectable Interface
One VGA (DB-15) Connector
One Speaker Out
One Microphone In
Two USB Ports (USB 1.1 Interface)
Two 3.5” HDD Supported
Four Audio-in Ports
Eight GPIO Ports
Support IR Controller to Remote Control tracer2000
Working Temperature: 0°C ~ 40°C
Storage Temperature: -10°C ~ 65°C
ƒ
ƒ
ƒ
ƒ
Relative Humidity: Maximum 85%, non-condensing
Power Requirement: AC100 ~ 240V, 50 / 60Hz, 150W Maximum
Dimension: 265mm (D) x 321mm (W) x 103mm (H)
Weight: 5.0kg
Version 3.1
Page 2 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Chapter II
Package
Check the accessories accompany with the system you purchase as listed below. With newer
package release, the accessories are compacted into an accessory box. Please check the
items and contact to your dealer you bought from if any of them is missing.
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
ƒ
tracer2000 System
Power Cord
Screws Pack
Remote Controller
Battery (AAA) x 2
tracer2000 Software User’s Manual
tracer2000 Hardware User’s Manual
Installation CD-ROM
Please keep the packaging materials. You may need them for the use of further service.
Version 3.1
Page 3 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Chapter III
Installation
Power/
HDD
LED
Playback
Display
Alarm
Menu
Confirm
IR
UP
Removable Air
Filter Bracket
LEFT
RIGHT
DOWN
Removable Air Filter Bracket
※ Remove and clean up Air Filters monthly is essential.
Front Panel View
MIC and
Speaker Out
BNC
Connector
Parallel Port
GPIO
Audio
Power Supply
COM2
10/100 Ethernet Port
COM1
USB Ports x 2
VGA
Rear Panel View
Version 3.1
Page 4 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
1. Indicator
Power LED: The green light shows power is on.
H.D.D. LED: The green light flash is HDD working.
H.D.D
LED
2. Cable Connection
Following is the basic device must be prepared before to start installation complete
system.
1.
2.
3.
tracer2000
CCD Cameras
VGA Monitor
Please follow the procedure to connect the cable.
2.1
Connect VGA Monitor
Version 3.1
Page 5 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Connect Camera Cable to BNC Connector
2.2
2.3
Connect to LAN Connector: Plug RJ-45 Connector to LAN Port
Insert RJ-45 cable to network LAN socket on the rear of tracer2000.
Version 3.1
Page 6 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Connect to Printer Port (Option)
2.4
There are two types of printer port. One is LPT the other is USB. Connect
port as show as below:
USB Port
Version 3.1
Page 7 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
3. Power Connector
3.1
Connect Power Cord (110V ~ 240V Auto Switch) into the Power
Socket
Press “I” to start up system and then you can see the power LED will be light in
front of panel.
Pushes switch
“I” to turn it on.
Version 3.1
Page 8 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Chapter IV
Pin Assignment
1. Internal Jumpers and Connectors
Version 3.1
Page 9 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Power Switch for ATX Power Supply (JP1)
1.1
1.2
Signals
JP1
Power ON/OFF
1-3
Reset / LED / Speaker (JP1)
Signals
JP1
9-10
14-20
7-8
5-6
2-4
Power LED, Pin9+, Pin10-
External Speaker
HDD LED, Pin8+, Pin7-
System Reset Switch
SUSLED Pin4+, Pin2-
P.S. For the AT system (short Pin10 & Pin12) for power on.
1.3
Internal USB Connector (USB2)
Signals
USB2-1
USB2-2
Power
Data-
Data+
USB GND
CHS GND
1
3
5
7
9
10
8
6
4
2
1.4
Power Connector (P1)
Signals
P1
+12V
10
+5V
4, 6, 19, 20
-12V
12
-5V
18
+3.3V
5VSB
1, 2, 11
9
PS-ON
POWER-OK
Ground
14
8
3, 5, 7, 13, 15, 16, 17
1.5
CMOS Clear (J1)
J1
POWER OFF and Move JUMPER from Pin1-2 to Pin2-3 of J1,
Reminding POWER OFF 1 Minute.
The Move JUMPER Back to 1-2 of J1
Version 3.1
Page 10 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
COM2 Mode Select (JP3)
1.6
Mode
RS232
RS422
RS485
JP3
3-5, 4-6, 9-11, 10-12, 17-18
1-3, 2-4, 7-9, 8-10, 15-16
1-3, 2-4, 7-9, 8-10, 13-14
1.7
1.8
CPU FSB Select (JP4)
Function
JP4
1-3, 2-4
3-5, 4-6
Auto by CPU
66MHz
FAN Control (FAN1, 2)
Function
FAN1, 2
Sense
+12V
PWM Control
3
2
1
1.9
HDD Connector (IDE1, 2)
39
40
1
2
Pin No.
1
Signal
-RST
D7
Pin No.
2
Signal
GND
D8
3
4
5
D6
6
D9
7
9
D5
D4
D3
D2
D1
D0
GND
REQ
IOW
IOR
IORDY
DACK
IRQ
A1
8
D10
D11
D12
D13
D14
D15
N.C.
GND
GND
GND
GND
GND
N.C.
PDIAG
A2
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
A0
CS0
-ACT
CS1
GND
Version 3.1
Page 11 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
1.10 Parallel / Printer Connector (PRN)
Pin No.
Signal
Strobe
Data 0
Data 1
Data 2
Data 3
Data 4
Data 5
Data 6
Data 7
Pin No.
10
11
12
13
14
15
16
17
Signal
-Acknowledge
Busy
Paper Empty
+Select
-Auto Feed
-Error
-INIT Printer
-Select Input
Ground
1
2
3
4
5
6
7
8
9
18-25
1.11 Video Input (J2)
1
2
43
44
Pin No.
1
Signal
VCC
GND
Pin No.
2
Signal
V-I-OE00
V-I-OE01
V-I-OE02
V-I-OE03
AGND
V-I-OE30
V-I-OE31
V-I-OE32
V-I-OE33
AGND
V-I-OE20
V-I-OE21
V-I-OE22
V-I-OE23
AGND
V-I-OE10
V-I-OE11
V-I-OE12
V-I-OE13
AGND
3
5
7
9
4
6
8
VIN00
VIN01
VIN02
VIN03
AGND
VIN30
VIN31
VIN32
VIN33
AGND
VIN20
VIN21
AGND
VIN22
VIN23
AGND
VIN10
VIN11
VIN12
VIN13
10
12
14
16
18
20
22
24
26
28
30
32
34
36
38
40
42
44
11
13
15
17
19
21
23
25
27
29
31
33
35
37
39
41
43
GND
VCC
Note: VIN xx is analog video input channel xx.
V-I-OExx is Odd / Even field information of video input channel xx.
Version 3.1
Page 12 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
1.12 General Purpose Input / Output (J3)
15
1
16
2
Pin No.
Signal
GPIO-0
GPIO-1
GPIO-2
GPIO-3
GPIO-4
GPIO-5
GPIO-6
GPIO-7
Pin No.
Signal
Audio IN3
AGND
Audio IN2
AGND
1
3
5
7
9
11
13
15
2
4
6
8
10
12
14
16
Audio IN1
AGND
Audio IN0
GND (for GPIO)
1.13 Infra-Red (IR)
Pin No.
Signal
VCC
IRRX
GND
IRTX
CIRRX
1
2
3
4
5
Version 3.1
Page 13 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
1.14 PCI Bus Pin Assignment
B62 B52 B49
A62 A52 A49
SOLDER SIDE
B1
A1
COMPONENT SIDE
Pin No.
A
B
-12V
TCK
GND
NC
Pin No.
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
A
B
AD17
C/BE2*
GND
IRDY*
VCC3
DEVSEL*
GND
LOCK*
PERR*
VCC3
SERR*
VCC3
C/BE1*
AD14
GND
AD12
AD10
GND
KEY
KEY
AD8
AD7
VCC3
AD5
AD3
1
2
3
4
5
6
7
8
TRST*
+12V
NC
NC
+5V
INTA*
INTC*
+5V
NC
+5V
AD16
VCC3
FRAME*
GND
TRDY*
GND
STOP*
VCC3
SDONE
SBO*
GND
+5V
+5V
INTB*
INTD*
PREN1*
NC
PREN2*
GND
GND
NC
GND
CLK
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
NC
GND
GND
3VSB
RST*
+5V
PAR
AD15
VCC3
AD13
AD11
GND
AD9
KEY
KEY
C/BE0*
VCC3
AD6
AD4
GND
AD2
AD0
+5V
REQ64*
+5V
GNT0*
GND
PME*
AD30
VCC3
AD28
AD26
GND
AD24
AD16
VCC3
AD22
AD20
GND
AD18
GND
REQ0*
+5V
AD31
AD29
GND
AD27
AD25
VCC3
C/BE3*
AD23
GND
GND
AD1
+5V
ACK64*
+5V
AD21
AD19
VCC3
+5V
+5V
Version 3.1
Page 14 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2. External Connector
2.1
CRT Display Connector (VGA)
5
1
15
10
Pin No.
Signal
Pin No.
Signal
Key
GND
1
2
3
4
5
6
7
8
RED
GREEN
BLUE
N/C
GND
GND
GND
GND
9
10
11
12
13
14
15
N/C
DCDA
H-SYNC
V-SYNC
DCDA
2.2
2.3
2.4
Audio Input Connector
M IC 1
M IC 2 M IC 3 M IC 4
GPIO Connector
USB Connector
USB Ports
Pin
2
3
4, 8
1, 5
6
Name
USB0-
USB0+
GND
USB Power
USB1-
7
USB1+
Version 3.1
Page 15 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2.5
COM1 Connector
1
5
9
6
RS232 Connector (COM1)
Pin No.
Signal
DCD
RX
1
2
3
4
5
6
7
8
9
TX
DTR
GND
DSR
RTS
CTS
RI
2.6
COM2 Connector
1
5
9
6
RS232 / RS422 / RS485 Connector (COM2)
Pin No.
RS232
DCD
RX
RS422
TX-
TX+
RX+
RS485
DATA-
DATA+
1
2
3
4
5
6
7
8
9
TX
DTR
GND
DSR
RTS
CTS
RI
RX-
GND
RTS-
RTS+
CTS+
CTS-
GND
Note: Please setup mode type by JP3.
Version 3.1
Page 16 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
3. Ethernet Connector (RJ-45)
Drawing of Ethernet Connector RJ-45
Pin No.
Signal
TX+
TX-
RX+
NC
NC
RX-
NC
1
2
3
4
5
6
7
8
NC
3.1
Connectors
The connectors allow this main board to connect with other parts of the system.
Some problems encountered with your system may be caused by loose or
improper connections. Ensure that all connectors are in place and firmly
attached.
Component
HDD (IDE) Connector
Slim FDD Connector
Internal USB Connector
Reset Switch Connector
External Speaker Connector
HDD LED Connector
External Power Connector
Serial Port
Label
IDE1, IDE2
FDC
USB2
JP1 (6-5)
JP1 (14-20)
JP1 (7-8)
P1
COM1, 2
LINE_OUT
LINE_IN
MIC_IN
RJ-45
Audio OUT
Audio IN
MIC
LAN
Video INPUT
J2
CMOS RAM Clear
Audio / GPIO
J1
J3
IR
IR
CPU FAN
Printer
FAN1, 2
PRN
Version 3.1
Page 17 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
3.2
3.3
P/T/Z Setting
The P/T/Z Setting complies with LILIN or PELCO. Protocol has been previously
attached to the COM ports. You may control the camera via arrow buttons.
In this case, you don’t need to buy dedicated P/T/Z controller.
Pin Assignment of COM2
Connect 9 PIN Female D_SUB to COM2 (Pin defines as below).
1
6
5
9
RS232 / RS422 / RS485 Connector (COM2)
Pin No.
RS232
DCD
RX
RS422
TX-
TX+
RX+
RS485
DATA-
DATA+
1
2
3
4
5
6
7
8
9
TX
DTR
GND
DSR
RTS
CTS
RI
RX-
GND
RTS-
RTS+
CTS+
CTS-
GND
Note: Please setup mode type by JP3.
3.4
Cable Connection
Camera input jack to COM2 for PIH-7000/7600. For example:
3.5
Jumper 3 Setting of COM2
The system default of COM2 is RS485. Adjust jumper JP3 in system for RS422,
RS232 signals as show below.
JP3
JP3
JP3
1
2
1
2
1
2
17
18
17
18
17
18
RS485
RS422
RS232
Version 3.1
Page 18 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Chapter V
CMOS Setting
1. Introduction
This manual discusses AwardTM setup program built into the ROM BIOS. The setup
program allows users to modify the basic system configuration. This special
information is then stored in battery-backed RAM so that it retains the setup information
when the power is turned off.
If system behaviors abnormal situation and you wish to check hardware values of CMOS,
you may connect a USB keyboard, restart the system by turning it OFF then ON or
pressing the “RESET” button on the system case. You may also restart by
simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys. Press <Delete> key to
enter CMOS setting pages.
2. Setup Pages
Phoenix-Award BIOS CMOS Setup Utility.
Standard CMOS Feature
Advanced BIOS Feature
Advanced Chipset Feature
Integrated Peripherals
Frequency / Voltage Control
Load Optimized Defaults
Set Supervisor Password
Set User Password
Power Management Setup
PnP / PCI Configurations
PC Health Status
Save & Exit Setup
Exit Without Saving
Esc: Quit
F10: Save & Exit Setup
Time, Date, Hard Disk Type.
F9: Menu in BIOS
↑ ↓ ← →: Select Item
Version 3.1
Page 19 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2.1
Standard CMOS Features
Use this menu for basic system configuration.
Date:
Time:
Mon., Feb 8 1999
16:19:20
Item Help
Menu Level
¾
IDE Primary
2557MB
None
Master
IDE Primary
Slave
IDE Secondary
Master
IDE Secondary
Slave
Change the day, month, year and
century.
None
None
None
None
EGA/VGA
No Errors
Drive A
Drive B
640
K
K
K
Video
64512
65536
Halt On
Based Memory
Extended
Memory
Total Memory
↑↓←→Move
Enter: Select
+/-/PU/PD: Value
F1: General Help
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-safe Defaults
F7: Optimized Defaults
Version 3.1
Page 20 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2.2
Advanced BIOS Features
Use this menu to set the Advanced Features available on your system.
Virus Warning
Disabled
Enabled
Enabled
Enabled
Disabled
HDD-0
HDD-1
CD-ROM
Enabled
On
Item Help
CPU Internal Cache
External Cache
Menu Level
¾
CPU L2 Cache ECC Checking
Quick Power On Self Test
First Boot Device
Allows you to choose the VIRUS
warning feature for IDE Hard Disk
boot sector protection. If this
function is enabled and someone
attempt to write data into this
area, BIOS will show a warning
message on screen and alarm
beep.
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up NumLock Status
Gate A20 Option
Fast
Typematic Rate Setting
xTypematic Rate (Chars/Sec)
xTypematic Delay (Msec)
Security Option
Disabled
6
250
Setup
OS Select For DRAM > 64MB
Report NO FDD for Win95
↑↓←→Move
Non-OS2
Yes
Enter: Select
+/-/PU/PD: Value
F1: General Help
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-safe Defaults
F7: Optimized Defaults
Version 3.1
Page 21 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
Advanced Chipset Features
2.3
Use this menu to change the values in the chipset registers and optimize your
system’s performance.
Virus Warning
Disabled
Enabled
Enabled
Enabled
Disabled
HDD-0
HDD-1
CD-ROM
Enabled
On
Item Help
CPU Internal Cache
External Cache
Menu Level
¾
CPU L2 Cache ECC Checking
Quick Power On Self Test
First Boot Device
Allows you to choose the VIRUS
warning feature for IDE Hard Disk
boot sector protection. If this
function is enabled and someone
attempt to write data into this
area, BIOS will show a warning
message on screen and alarm
beep.
Second Boot Device
Third Boot Device
Boot Other Device
Boot Up NumLock Status
Gate A20 Option
Fast
Typematic Rate Setting
xTypematic Rate (Chars/Sec)
xTypematic Delay (Msec)
Security Option
Disabled
6
250
Setup
OS Select For DRAM > 64MB
Report NO FDD for Win95
↑↓←→Move
Non-OS2
Yes
Enter: Select
+/-/PU/PD: Value
F1: General Help
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-safe Defaults
F7: Optimized Defaults
Version 3.1
Page 22 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
SDRAM CAS Latency Time
SDRAM Cycle Time Tras/Trc
SDRAM RAS-to-CAS Delay
SDRAM RAS Precharge Time
System BIOS Cacheable
Video BIOS Cacheable
Memory Hole at 15M ~ 16M
CPU Latency Timer
3
Item Help
7/9
3
Menu Level
3
Disabled
Disabled
Disabled
Enabled
Enabled
64MB
100MHz
Auto
Delay Transaction
AGP Graphics Aperture Size
Display Cache Frequency
System Memory Frequency
On-chip Video Window Size
* Onboard Display Cache Setting *
CAS# Latency
64MB
3
Paging Mode Control
Open
RAS-to-CAS Override
By CAS# LT
Fast
RAS# Timing
RAS# Precharge Timing
Fast
↑↓←→Move
Enter: Select
ESC: Exit
F6: Fail-safe Defaults
+/-/PU/PD: Value
F10: Save
F1: General Help
F5: Previous Values
F7: Optimized Defaults
Version 3.1
Page 23 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2.4
Integrated Peripherals
Use this menu to specify your setting for integrated peripherals.
OnChip Primary PCI IDE
OnChip Secondary PCI IDE
IDE Primary Master PIO
IDE Primary Slave PIO
IDE Secondary Master PIO
IDE Secondary Slave PIO
IDE Primary Master UDMA
IDE Primary Slave UDMA
IDE Secondary Master UDMA
IDE Secondary Slave UDMA
USB Controller
Enabled
Enabled
Auto
Auto
Auto
Auto
Auto
Auto
Auto
Item Help
Menu Level
¾
If your IDE hard drive supports
block mode select Enabled for
automatic detection of the optimal
number of block read / write per
sector the drive can support.
Auto
Enabled
Enabled
Disabled
Onboard / AGP
Auto
USB Keyboard Support
USB Mouse Support
Init Display
AC97 Audio
IDE HDD Block Mode
Power On Function
Enabled
Button Only
Enter
Ctrl-F1
3F8 / IRQ4
2F8 / IRQ3
Normal
Hi, Lo
xKB Power On Password
xHot Key Power On
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
xRxD, TxD Active
xIR Transmission Delay
xUR2 Duplex Mode
Enabled
Half
xUse IR Pins
Onboard Parallel Port
Parallel Port Mode
IR-Rx2Tx2
378 / IRQ7
SPP
EPP Mode Select
EPP1.7
3
Off
ECP Mode Use DMA
PWRON After PWR-Fail
Watch Dog Timer Select
Disable
↑↓←→Move
F10: Save
Enter: Select
ESC: Exit
+/-/PU/PD: Value
F1: General Help
F5: Previous Values
F6: Fail-safe Defaults
F7: Optimized Defaults
Version 3.1
Page 24 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2.5
Power Management Setup
Use this menu to specify your settings for power management.
ACPI Function
Disabled
S1 (POS)
User Define
DPMS
Item Help
ACPI Suspend Type
Power Management
Video Off Method
Menu Level
¾
Video Off In Suspend
Suspend Type
Yes
Stop Grant
3
Modem Use IRQ
Suspend Mode
Disabled
Disabled
Instant-off
Disabled
Enabled
Disabled
Former-sts
50.0%
HDD Power Down
Soft-off by PWR-BTTN
Wake-up by PCI Card
Power On By Ring
USB KB Wake-up From S3
PWRON After PWR-Fail
CPU Thermal-throttling
Resume by Alarm
Disabled
0
X Date (of Month) Alarm
X Time (hh: mm: ss) Alarm
0
0
0
** Reload Global Timer Events **
Primary IDE 0
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
Primary IDE 1
Secondary IDE 0
Secondary IDE 1
FDD, COM, LPT Port
PCI PIRQ [A-D]#
↑↓←→Move
Enter: Select
ESC: Exit
F6: Fail-safe Defaults
+/-/PU/PD: Value
F1: General Help
F10: Save
F5: Previous Values
F7: Optimized Defaults
Version 3.1
Page 25 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2.6
PnP / PCI Configuration
This entry appears if your system supports PnP / PCI.
Reset Configuration Data
Resources Controlled By X IRQ
Resources
Disabled
Item Help
Auto (ESCD)
Press Enter
Disabled
Menu Level
¾
PCI / VGA Palette Snoop
Default is Disabled. Select
Enabled to reset Extended System
Configuration Data (ESCD) when
you exit Setup if you have
installed a new add-on and the
system reconfiguration has
caused such a serious conflict that
the OS cannot boot.
↑↓←→Move
Enter: Select
ESC: Exit
F6: Fail-safe Defaults
+/-/PU/PD: Value
F10: Save
F1: General Help
F5: Previous Values
F7: Optimized Defaults
2.7
PC Health Status
Use this menu to monitor the CPU and system temperature, CPU fan speed the
voltage of the onboard regulators.
CPU Warning Temperature
Current System Temperature
Current CPU1 Temperature
IN0(V)
Disabled
Item Help
Menu Level
¾
IN1(V)
IN2(V)
+5V
VBAT(V)
5VSB(V)
Disabled
Shutdown Temperature
↑↓←→Move
Enter: Select
+/-/PU/PD: Value
F1: General Help
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-safe Defaults
F7: Optimized Defaults
Version 3.1
Page 26 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2.8
Frequency / Voltage Control
Use this menu to specify your settings for frequency / voltage control.
Auto Detect DIMM / PCI CLK
Spread Spectrum
Enabled
Disabled
Item Help
Menu Level
¾
↑↓←→Move
Enter: Select
+/-/PU/PD: Value
F1: General Help
F10: Save
ESC: Exit
F5: Previous Values
F6: Fail-safe Defaults
F7: Optimized Defaults
2.9
Load Optimized Defaults
Use this menu to load the BIOS default values that are factory settings for
optimal performance system operations. While Award has designed the
custom BIOS to maximize performance, the factory has the right to change
these defaults to meet their needs.
Load Optimized Defaults (Y/N)? N
Pressing “Y” loads the default values that are factory settings for optimal
performance system operations.
2.10 Supervisor / User Password
Use this menu to set User and Supervisor Passwords.
2.11 Save & Exit Setup
Save CMOS value changes to CMOS and exit setup.
2.12 Exit Without Save
Abandon all CMOS value changes and exit setup.
Version 3.1
Page 27 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
.
Chapter VI
System HDD Installation Guide
Follow the step to setup HDD drawing box.
1. Remove the screws on the case. (Marked in while circles)
Remove the screws on the case.
Version 3.1
Page 28 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
2. Take off the upper cover and remove the screws.
Remove the screw.
Version 3.1
Page 29 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
3. Remove HDD tray, and install HDD properly.
Version 3.1
Page 30 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
tracer2000 Network DVR Hardware User’s Manual
4. Insert the assembled HDD tray into tracer2000, and connect both power and
HDD.
5. Assemble the upper cover and the screws.
Version 3.1
Page 31 of 31
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Eagle Electronics Fish Finder Accura 240 User Manual
Echo Hair Clippers HCA 260 User Manual
Eiki Projector LC 120 User Manual
Fisher Price Baby Toy G6539 User Manual
Fisher Price Car Seat T3643 User Manual
Fisher Price Motorized Toy Car 78538 User Manual
FujiFilm DVD Recorder EX31 User Manual
Fujitsu Laptop V3505 User Manual
FUNAI CRT Television F3819D User Manual
GE Waffle Iron 840101500 User Manual