Geemarc Clock TravelClock User Manual

TravelClock  
MULTIFUNCTION ALARM CLOCK  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION  
DESCRIPTION  
Left Side Description  
General Description  
Front Description  
Snooze/Backlight  
Button/Strobe  
LCD Display  
Snooze and  
Alarm ON  
Alarm  
ON  
Snooze and  
Alarm OFF  
Alarm Mode  
Settings Switch  
Mode  
Button  
Light Button  
Up/Down  
Button  
Alarm  
Volume  
Setting  
Carrying Strap  
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
DESCRIPTION  
INSTALLATION  
Right Side Description  
Setting Up  
Slide and open the battery compartment found on the base of the alarm  
clock. Insert 3 good quality alkaline batteries (AAA size, 1.5V type, these  
are not supplied) into the battery compartment. Check the battery polarity  
diagrams in the battery compartment when inserting the batteries.  
Replace the battery cover.  
Note : Do not use rechargeable batteries. Do not put batteries into the  
household rubbish, pay attention to battery regulations regarding battery  
disposal.  
Remove the clear film label found on the LCD display.  
Lock  
Timer  
4.5V  
Socket  
Settings  
Switch  
Time  
Set  
Alarm  
Set  
Base Description  
Speaker  
Alarm Alert Setting  
Battery Compartment  
5
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE CLOCK/CALENDAR  
USING THE CLOCK/CALENDAR  
Time Setting  
12h/24h Clock Setting  
In the Lock position, Press ". This will allow you to toggle between 12h  
Slide the settings switch to the Time Set  
position  
and 24h clock setting.  
The HOUR digits will flash. Use ! and " to select the correct hour  
Press Mode button  
The MINUTE digits will flash. Use ! and " to select the correct  
minute  
Press Mode button  
The YEAR digits will flash. Use ! and " to select the correct year  
Press Mode button  
The MONTH digits will flash. Use ! and " to select the correct  
month  
Press Mode button  
The DATE digits will flash. Use ! and " to select the correct date  
When satisfied with the time and date setting, slide the setting switch  
back to the Lock position. This protects the set time against  
accidental changes caused by touching buttons  
Note: The day of the week will be set automatically by the internal  
calendar after the year, month and date are set.  
8  
7  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE ALARM  
USING THE ALARM  
Alarm Time Setting  
Alarm Alert Setting  
Select the alarm alert you wish to use by sliding the alarm alert switch to  
one of the following selections:  
Slide the settings switch to the Alarm Set  
position  
VIB  
VIB+AL = Shaker and sound and strobe alarm  
AL = Sound and strobe alarm  
= Shaker alarm  
‘ALARM’ and the alarm HOUR digits will start to flash. Use ! and  
" to select the required alarm hour  
Press Mode button  
Alarm Mode Setting  
Select the alarm mode you wish to hear by sliding the alarm mode switch  
to one of the following selections:  
The alarm MINUTE digits will flash. Use ! and " to select the  
required alarm minutes  
Alarm On  
in the top left corner of the screen  
= Alarm on, snooze off. The alarm icon will be displayed  
Press Mode button  
The SNOOZE digits will flash. Use ! and " to select the required  
The alarm will ring once for 1 minute. Press the Snooze/Light button to  
stop the ringing. The alarm will not ring again.  
snooze time. The range of snooze time is between 1 – 60 minutes  
Snooze On  
= Alarm on, snooze on. The alarm and the snooze (Zz)  
When satisfied with the alarm setting, slide the setting switch back to  
the Lock position. This protects the set alarm time against accidental  
changes caused by touching buttons  
icons will be displayed in the top left corner of the screen  
Press the Snooze/Light button to stop the ringing. The alarm will ring  
three times for 1 minute whilst in snooze mode . The snooze interval  
between the three rings can be set when setting the alarm time.  
Alarm Off  
= Alarm off, snooze off. The alarm will not ring  
Alarm Volume Setting  
The alarm volume can be altered using the alarm volume setting key.  
Decrease volume  
Increase volume  
The alarm volume can be altered while the alarm is ringing or simply in  
standby mode.  
10  
9  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE TIMER  
USING THE TIMER  
Count Up Timer  
Countdown Timer  
Slide the settings switch to the Timer Set position  
Slide the settings switch to the Timer Set position  
Press Mode button twice  
Press Snooze/Light button to Start and Stop the count up timer  
To clear the count up timer – press Snooze/Light button to stop the  
timer followed by the mode button  
The timer HOUR digits will flash. Use ! and " to select the  
required timer hour  
Press Mode button  
The MINUTES digits will flash. Use ! and " to select the required  
timer minutes.  
Press Mode button  
The SECOND digits will flash. Use ! and " to select the required  
timer seconds  
Press Snooze/Light button to start the countdown timer. This button  
can also be used to stop the timer  
When finished with the timer, slide the setting switch back to the Lock  
position  
Notes: The maximum countdown is 29 hours 59 minutes. The minimum  
countdown is 1 hour.  
11  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USING THE BACKLIGHT  
OPTIONAL ACCESSORIES  
You can check the time easily and clearly in the dark by using one of the  
following methods:  
If you wish to use an optional Geemarc mains adaptor, you need to  
connect the power supply to the 4.5V socket on the right side of the  
travelclock and plug the other end into a wall socket.  
1) Press the Snooze/Light button. The display will light up with a soft  
glow that lasts for a short time.  
2) Press the Light button. The display will light up with a soft glow.  
The backlight will switch off as soon as you release this button.  
Note: Frequent use of this feature will reduce the life of the batteries.  
13  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TROUBLESHOOTING  
SAFETY INFORMATION  
No display  
No alarm or weak alarm  
No backlight  
General  
Do not open the unit (except to replace the batteries). Contact the helpline  
for all repairs.  
Reduced functionality  
Make sure the batteries are inserted correctly  
Make sure that the batteries are fully charged  
Never dispose of batteries in a fire. There is a serious risk of explosion  
and/ or the release of toxic chemicals.  
Cleaning  
Clean the alarm clock with a soft cloth. Never use polishes or cleaning  
agents - they could damage the finish or the electrics inside.  
Environmental  
Do not expose to direct sunlight.  
Always ensure there is a free flow of air over the surfaces of the alarm  
clock  
Do not place any part of your product in water and do not use it in damp or  
humid conditions e.g. bathrooms.  
Do not expose your product to fire or other hazardous conditions.  
15  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
GUARANTEE  
GUARANTEE  
From the moment your Geemarc product is purchased, Geemarc  
guarantee it for the period of one year. During this time, all repairs or  
replacements (at our discretion) are free of charge. Should you experience  
a problem then contact our help line or visit our website at  
www.geemarc.com. The guarantee does not cover accidents, negligence  
or breakages to any parts. The product must not be tampered with or  
taken apart by anyone who is not an authorised Geemarc representative.  
The Geemarc guarantee in no way limits your legal rights.  
Electrical connection: The apparatus is designed to operate from a 230V  
50Hz supply only. (Classified as ‘hazardous voltage’ according to  
EN60950 standard). The apparatus does not incorporate an integral  
power on/off switch. To disconnect the power, either switch off supply at  
the mains power socket or unplug the AC adaptor. When installing the  
apparatus, ensure that the mains power socket is readily accessible.  
Telephone connection: Voltages present on the telecommunication network  
are classified TNV-3 (Telecommunication Network Voltage) according to  
the EN60950 standard.  
IMPORTANT: YOUR RECEIPT IS PART OF YOUR GUARANTEE AND  
MUST BE RETAINED AND PRODUCED IN THE EVENT OF A  
WARRANTY CLAIM.  
Please note: The guarantee applies to  
the United Kingdom only  
DECLARATION: Geemarc Telecom SA hereby declares that this  
product is in compliance with the essential requirements and other  
relevant provisions of the Radio and Telecommunications Terminal  
Equipment Directive 1999/5/EEC and in particular article 3 section  
1a, 1b and section 3. The telephone does not operate if the line  
current is lower than 18 mA.  
17  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
RECYCLING DIRECTIVES  
The WEEE (Waste Electrical and Electronic Equipment) has been put in  
place for the products at the end of their useful life are recycled in the best  
way.  
When this product is finished with, please do not put it in your domestic  
waste bin.  
Please use one of the following disposal options:  
- Remove the batteries and deposit them in an appropriate WEEE skip.  
Deposit the product in an appropriate WEEE skip.  
- Or, hand the old product to the retailer. If you purchase a new one, they  
should accept it.  
Thus if you respect these instructions you ensure human health and  
environmental protection.  
For product support and help visit our website at www.geemarc.com  
Telephone 01707 384438  
Or fax 01707 372529  
UGTRAVELCL_UK  
ED.01  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Evolution Technologies Speaker EVO20 User Manual
Extron electronic Power Supply P S 100 User Manual
Ford Lawn Mower 58064 User Manual
Freestyle Watch 81372 User Manual
Fundex Games Board Games 2612 User Manual
Garmin GPS Receiver 126 User Manual
GE Air Conditioner ASV12 User Manual
GE Convection Oven PT920SM User Manual
GE Indoor Furnishings ET 16 User Manual
GE Oven JKP25SH User Manual