Hotspot Gateway Ticket Printer Setup - Quick Start Guide
Printer Configuration
The Guest Internet GIS-TP1 is an access code ticket printer that prints pre-
programmed tickets on demand. A tablet computer or laptop is required to
initiate ticket printing, by touching buttons on the screen, exactly like a point
of sale terminal. The buttons are preset using the ticket printer
administration page on the gateway.
GIS-TP1
Connect your GIS-TP1 ticket printer to the gateway via a LAN port as
shown in the diagram. A switch will be necessary to connect wireless
access points and the printer. Connect your laptop computer to one of the
LAN ports of the gateway.
All guest Internet gateway products have a
ticket printer interface. You may need to
request a new firmware upgrade to get
this feature for your product.
Open your
computer
GIS-gateway
browser and login
as ADMIN (see
below). First you
must create a
CODES login
password as this
is the login used
by the print
Switch
Internet
DSL/
Cable
control computer
(a tablet or
laptop).
GIS-TP1 ticket printer
Wireless Internet
Next go to advanced settings > printer setup, in the ADMIN menu. Ensure
that printer status is enabled and then fill in the three fields of data that
will be printed together with the code. Check the box to print expiry time if
required. Click the update settings button. Return to the printer setup page
and click the Print Test Page button and verify that a ticket is printed.
Power and data
connectors are
GIS-TP1
underneath the printer
LAN connection
to gateway
The GIS-TP1 ticket printer has a LAN
port underneath the unit. An Ethernet
cable must connect the LAN port either
directly to a gateway LAN port, or
connected to the gateway LAN port via
a switch.
The tablet computer or laptop that is
used to control ticket printing will
connect to the gateway via the wireless
network.
Power supply
12volts
3 amps
USE ONLY THE 12volt, 3amp POWER SUPPLY SHIPPED
WITH THE GIS-TP1 UNIT TO PREVENT DAMAGE
LOGIN AS ADMIN: Connect your computer to a LAN port via an Ethernet cable. Open your browser and
type in the URL to login to the Admin pages of your gateway: http://aplogin.com/admin
The username is admin, and the password is the one that you entered with the wizard. When the page
opens select the advanced settings > printer menu page. See the manual for more information
Copyright © Fire4 Systems Inc., 2012. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|