Gateway Profile 6
REFERENCEGUIDE
®
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Gateway contact information . . . . . . . . . . . . . . . . . . . . . . . . . 3
Setting up your computer desk and chair . . . . . . . . . . . 17
Avoiding discomfort and injury from repetitive strain . 18
Turning off your computer . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Restarting (rebooting) your computer . . . . . . . . . . . . . . . . . 22
Using the keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Premium multimedia keyboard features . . . . . . . . . . . . 23
Elite multimedia keyboard features . . . . . . . . . . . . . . . . 24
Using the mouse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Configuring the audio jacks . . . . . . . . . . . . . . . . . . . . . . . . . 30
Installing a printer, scanner, or other device . . . . . . . . . . . 31
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Preventing static electricity discharge . . . . . . . . . . . . . . . . . 34
Replacing the processor fan . . . . . . . . . . . . . . . . . . . . . . . . . 37
Replacing the diskette drive . . . . . . . . . . . . . . . . . . . . . . . . . 41
Replacing an optical disc drive . . . . . . . . . . . . . . . . . . . . . . . 42
Adding or replacing an expansion card . . . . . . . . . . . . . . . . 47
Replacing the BIOS battery . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Chapter 5: Maintaining Your Computer. . . . . . 55
Setting up a maintenance schedule . . . . . . . . . . . . . . . . . . . 56
Deleting unnecessary files . . . . . . . . . . . . . . . . . . . . . . . 62
Checking the hard drive for errors . . . . . . . . . . . . . . . . 63
Defragmenting the hard drive . . . . . . . . . . . . . . . . . . . . 64
Backing up files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Scheduling maintenance tasks . . . . . . . . . . . . . . . . . . . . . . . 66
Moving from your old computer . . . . . . . . . . . . . . . . . . . . . 67
ii
Download from Www.Somanuals.com. All Manuals Search And Download.
Moving with Windows Easy Transfer . . . . . . . . . . . . . . . 67
Safety guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CD or DVD drives . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
File management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Recovering your system using the Windows DVD . . . . 99
Telephone support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
Before calling Gateway Customer Care . . . . . . . . . . . . 100
Telephone numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Self-help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Tutoring . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
iii
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Training . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Chapter 7: Legal Notices . . . . . . . . . . . . . . . . 105
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1: About This Reference
About this guide
This guide includes information and maintenance instructions
that are specific to your model of Gateway computer. Some
illustrations in this guide may look different than your
computer because hardware options and port locations may
vary. For all other computer information, see the online User
Guide.
For more information
For more information about your computer, visit Gateway’s
Support page at www.gateway.com or the Web address
shown on your computer’s label. The Support page also has
links to additional Gateway documentation and detailed
specifications.
Accessing the online User
Guide
In addition to this guide, the User Guide has been included
on your hard drive. The User Guide is an in-depth,
easy-to-read manual that includes information on the
following topics:
•
•
•
•
•
•
•
Help and technical support
Using and customizing Windows and other software
Controlling audio and video settings
Using the Internet
Protecting your files
Playing and recording media
Maintaining
To access the User Guide:
Click (Start), All Programs, then click Gateway
Documentation.
•
2
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Gateway contact information
The label on the side of your computer case contains
information that identifies your computer model and serial
number. Gateway Customer Care will need this information if
you call for assistance.
Microsoft Certificate of
Authenticity
The Microsoft Certificate of Authenticity label found on the
side of your computer includes the product key code for your
operating system. If you ever reinstall Windows from the
installation DVD, you will need to enter these numbers to
activate Windows.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 1: About This Reference
4
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Component
Icon
Description
DVD/CD drive
Use this drive to listen to audio CDs, install
games and programs, watch DVDs, and store
large files onto recordable discs (depending on
drive type).
This drive may be a CD, recordable CD, DVD,
or recordable DVD drive. To identify your drive
type and for more information about your
drive, see your user guide.
Memory card
reader (optional)
Insert a memory card from a digital camera,
MP3 player, PDA, cellular telephone, or other
devices into the memory card reader.
Diskette drive
(optional)
Insert a standard 3.5-inch diskette into the
optional diskette drive.
Power button and
power indicator
Press this button to turn the power on or off.
You can also configure the power button to
operate in Standby/Resume mode or
Hibernate mode. The power indicator lights
when the computer is turned on.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Computer
Back
Opening for
cables
Power connector
Kensington lock slot
Component
Description
Opening for cables
Route the cables that are plugged into the side ports
through this opening.
Power connector
Plug the power cord into this connector.
Kensington lock slot
Attach a cable lock to this slot to prevent unauthorized
opening, modification, and theft of your computer.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Computer
Component
Icon
Description
Display controls
Press these buttons to adjust the screen
image.
Volume control
USB ports
Press to adjust the volume level of the
built-in speakers.
Plug a USB (Universal Serial Bus) device
(such as a USB printer, scanner, camera,
keyboard, or mouse) into one of these
ports. For more information, see “Installing
a printer, scanner, or other device” on
page 31.
Microphone jack
Headphone jack
Plug a microphone into this jack. This jack
is color-coded red or pink.
Plug powered, analog front speakers, an
external amplifier, or headphones into this
jack. This jack is color-coded green.
Side port cover
Remove this cover to access the ports
underneath, such as USB, parallel, serial,
IEEE 1394/FireWire™, and audio jacks. For
more information, see “Side port panel” on
page 11.
Back panel release
latches
For service, pull both of these latches (one
on each side of the case) toward the back
of the case, then lift the back panel away
from the case.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Side port panel
Important
Your computer’s hardware options and port locations may vary from this
illustration.
Access the side port panel by removing the port cover on the right
side of your computer.
Digital (DVI) video in port
Modem jack (optional)
Telephone jack (optional)
(half-height PCI card slot)
IEEE 1394/FireWire™
4-pin port
Expansion card slots
VGA in port
Parallel port
Serial port
IEEE 1394/FireWire™
6-pin (powered) port
USB ports
PS/2 mouse port
Ethernet (network) jack
PS/2 keyboard port
Center/subwoofer jack
S/PDIF jack
Rear speaker jack
Audio in/side speaker jack
Headphone/front speaker jack
Microphone jack
11
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Computer
Component
Icon
Description
Digital (DVI) video in
port
If you have a digital video (DVI) expansion
card installed, connect its DVI out port to
this DVI in port.
Telephone jack
(optional)
Plug a telephone into this jack (optional).
The modem cable must be connected to a
wall jack for the telephone to be connected
to this jack. For more information on
connecting the modem, see “Connecting a
dial-up modem” on page 19.
®
IEEE 1394/FireWire™
4-pin port
devices (such as a digital camcorder) into
this 4-pin IEEE 1394 port.
(VGA) in port
Parallel port
If you have an analog (VGA) video
expansion card installed, connect its VGA
out port to this VGA in port.
Plug a parallel device (such as a printer)
into this port. For more information, see
device” on page 31.
Serial port
USB ports
Plug a serial device (such as an older digital
camera or mouse) into this port.
Plug a USB device (such as a printer,
scanner, camera, keyboard, or mouse) into
one of these ports. For more information,
see “Setting Up and Getting Started” on
page 15.
PS/2 mouse port
Plug a PS/2 mouse into this port.
PS/2 keyboard port
Plug a PS/2 keyboard into this port.
S/PDIF optical audio
jack
Plug an S/PDIF optical audio connection to
this jack.
Microphone jack (pink
plug)
Plug a microphone into this jack.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Component
Icon
Description
Headphone/analog
speakers jack (green
plug)
If the back of your computer has five audio
jacks, this jack is user configurable for one
of the following:
-OR-
Headphone: Plug headphones or
amplified speakers into this jack (Default).
Stereo out: Plug your front left and right
speakers into this jack.
For information on configuring this jack,
see “Configuring the audio jacks” on
page 30.
Front speakers jack
If the back of your computer has three
audio jacks, this jack is the
headphone/analog speaker (line out) jack.
Plug powered speakers, an external
amplifier, or headphones into this jack.
Modem jack
Plug a modem cable into this jack. For
more information on modems, see
“Connecting a dial-up modem” on
page 19.
Expansion card slots
Install a PCI card or graphics card into the
riser card slots.
®
IEEE 1394/FireWire™
6-pin port
Plug IEEE 1394 (also known as Firewire )
devices (such as a digital camcorder) into
this 6-pin IEEE 1394 port. For more
information on connecting video devices,
see “Installing a printer, scanner, or other
device” on page 31.
Ethernet (network)
jack
Plug an Ethernet network cable or a device
(such as a DSL or cable modem for a
broadband Internet connection) into this
jack. For more information, see
“Connecting to a broadband modem or
network” on page 19.
Center/subwooferjack
(orange plug)
Plug your center speaker and subwoofer
into this optional jack.
For information on configuring this jack,
see “Configuring the audio jacks” on
page 30.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 2: Checking Out Your Computer
Component
Icon
Description
Rear speaker jack
(black plug) (optional)
Plug your rear right and left speakers into
this optional jack.
For information on configuring this jack,
see “Configuring the audio jacks” on
page 30.
Audio input (Line in)
jack (blue plug)
-OR-
If the back of your computer has five audio
of the following:
Side speaker jack
Stereo in: Plug an external audio input
source (such as a stereo) into this jack so
you can record sound on your computer
(Default).
Stereo out: Plug your side left and right
speakers into this jack.
For information on configuring this jack,
see “Configuring the audio jacks” on
page 30.
If the back of your computer has three
audio jacks, this jack is the audio input (line
in) jack. Plug an external audio input
source (such as a stereo) into this jack so
you can record sound on your computer.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
network
• Connecting a dial-up modem
• Starting your computer
• Turning off your computer
• Restarting (rebooting) your computer
• Using the keyboard
• Using the mouse
• Adjusting the volume
• Configuring the audio jacks
• Installing a printer, scanner, or other device
15
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Working safely and
comfortably
Before using your computer, follow these general guidelines
for setting up a safe and comfortable work area and avoiding
discomfort and strain:
•
•
Keep hands and arms parallel to the floor.
Adjust the screen so it is perpendicular to your line of
sight, and the top of the screen is no higher than eye
leve.
•
•
Place your feet flat on the floor or on a footrest.
Keep ventilation openings clear of obstructions.
Top of screen is not
higher than eye level
Screen is perpendicular to
your line of sight
Hands and arms are
parallel to the floor
Feet are flat on the floor
16
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Reducing eye strain
Sunlight or bright indoor lighting should not reflect on the
monitor screen or shine directly into your eyes.
•
Position the computer desk and screen so you can avoid
glare on your screen and light shining directly into your
eyes. Reduce glare by installing shades or curtains on
windows, and by installing a glare screen filter.
•
•
•
Use soft, indirect lighting in your work area. Do not use
your computer in a dark room.
Set paper holders at the same height and distance as
the monitor.
Avoid focusing your eyes on your computer screen for
long periods of time. Every 10 or 15 minutes, look
around the room, and try to focus on distant objects.
Setting up your computer desk and chair
When you are setting up your computer desk and chair, make
sure that the desk is the appropriate height and the chair helps
you maintain good posture.
•
•
Select a flat surface for your computer desk.
Adjust the height of the computer desk so your hands
and arms are positioned parallel to the floor when you
use the keyboard and touchpad. If the desk is not
adjustable or is too tall, consider using an adjustable
chair to control your arm’s height above the keyboard.
•
•
Use an adjustable chair that is comfortable, distributes
your weight evenly, and keeps your body relaxed.
Position your chair so the keyboard is at or slightly
below the level of your elbow. This position lets your
shoulders relax while you type.
•
•
Adjust the chair height, adjust the forward tilt of the
seat, or use a footrest to distribute your weight evenly
on the chair and relieve pressure on the back of your
thighs.
Adjust the back of the chair so it supports the lower
curve of your spine. You can use a pillow or cushion to
provide extra back support.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Sitting at your computer
•
Avoid bending, arching, or angling your wrists. Make
sure that they are in a relaxed position when you type.
•
Do not slouch forward or lean far back. Sit with your
back straight so your knees, hips, and elbows form right
angles when you work.
•
•
Take breaks to stand and stretch your legs.
Avoid twisting your torso or neck.
Avoiding discomfort and injury from repetitive
strain
•
•
Vary your activities to avoid excessive repetition.
Take breaks to change your position, stretch your
muscles, and relieve your eyes.
•
Find ways to break up the work day, and schedule a
variety of tasks.
Preparing power connections
Protecting from power source problems
Warning
High voltages can enter your computer through both the power cord
and the modem connection. Protect your computer by using a surge protector.
If you have a telephone modem, use a surge protector that has a modem jack.
If you have a cable modem, use a surge protector that has an antenna/cable
TV jack. During an electrical storm, unplug both the surge protector and the
modem.
During a power surge, the voltage level of electricity coming
into your computer can increase to far above normal levels
and cause data loss or system damage. Protect your computer
and peripheral devices by connecting them to a surge
protector, which absorbs voltage surges and prevents them
from reaching your computer.
An uninterruptible power supply (UPS) supplies battery power
to your computer during a power failure. Although you cannot
run your computer for an extended period of time with a UPS,
a UPS lets you run your computer long enough to save your
work and shut down your computer normally.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Connecting to a broadband
modem or network
Important
Your computer may be equipped with a built-in Ethernet (network) jack.
For information about setting up a wired or wireless Ethernet network, see the
online User Guide.
You can connect your computer to a cable or DSL modem or
to a wired Ethernet network.
To connect to a broadband modem or to an Ethernet
network:
1
Insert one end of the network cable into the network
jack
on the right side of your computer. To see its
location, see “Side port panel” on page 11.
2
Insert the other end of the network cable into a cable
modem, DSL modem, or network jack.
Connecting a dial-up modem
Warning
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
Your computer may have a 56K modem that you can use with
a standard telephone line to connect to the Internet or fax
documents.
To connect the modem:
1
Insert one end of the modem cable into the modem
jack
on the modem at the right side of your
computer. To see its location, see “Side port panel” on
page 11.
2
3
Insert the other end of the modem cable into a
telephone wall jack. (The modem will not work with
digital or PBX telephone lines.)
If you want, connect a telephone to the PHONE jack on
the modem on the right side of your computer.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Starting your computer
To start your computer:
1
Connect the power, network, mouse, and keyboard
cables to your computer according to the setup poster.
2
Press the power button on the front of your computer.
If your computer does not turn on, check the power
cable connections.
Important
Your computer has a built-in, variable-speed fan. In addition,
your computer uses a powerful processor which produces heat and has
its own cooling fan. Both the system fan and processor fan can run at
different speeds at times to ensure correct system cooling. You may
notice an increase in the fan noise when the fan is running at high speed
and a decrease in the fan noise when it switches to normal speed.
3
4
If you are starting your computer for the first time,
follow the on-screen instructions to select the language
and time zone and to create your first user account.
Attach and turn on any USB or audio peripheral devices,
such as printers or scanners. If you need to attach a
peripheral device to the parallel or serial ports, turn off
your computer first. See the documentation that came
with each device for its setup instructions.
5
To open your computer’s main menu, click
(Start).
From that menu, you can run programs and search for
files. For more information on using your computer’s
menus, see “Using Windows Vista” and “Customizing
Windows” in the online User Guide.
Waking up your computer
Tip
For more information about changing the power button mode, see the
“Customizing Windows” chapter in the online User Guide.
When you have not used your computer for several minutes,
it may enter a power-saving mode called Sleep. While in Sleep
mode, the power indicator on the power button flashes.
If your computer is in Sleep mode, move the mouse, press a
key on the keyboard, or press the power button to “wake” it
up.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Turning off your computer
Warning
When you turn off your computer, certain components in the power
supply and system board remain energized. In order to remove all electrical
power from your computer, unplug the power cord and modem cable from
the wall outlets. We recommend disconnecting the power cord and modem
cable when your computer will not be used for long periods.
Important
If for some reason you cannot use the Shut Down option in Windows to
turn off your computer, press and hold the power button for about five seconds,
then release it.
Putting your computer into Sleep mode is the easiest way to
power down your computer. Although it does not turn your
computer completely off, it does turn off or slow down most
system operations to save power, and saves your desktop
layout so the next time you restore power, the programs are
laid out just as you left them. Waking your computer from a
Sleep state is much faster than turning on your computer after
it has been turned completely off.
To put your computer to sleep:
1
Click
(Start), then click
(power). The
computer saves your session and partially shuts down
to save power.
2
To “wake” your computer, press a key on the keyboard
or press the power button.
To turn off your computer:
1
Click
(Start), click the arrow next to the lock icon,
then click Shut Down. The computer turns off.
2
To completely disconnect all power (such as for
servicing internal components), also disconnect the
power cord.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Restarting (rebooting) your
computer
If your computer does not respond to keyboard or mouse
input, you may need to restart (reboot) your computer.
To restart your computer:
1
Click
(Start), click the arrow next to the lock icon,
then click Restart. Your computer turns off, then turns
on again.
2
If your computer does not turn off, press and hold the
power button until the computer turns off (about five
seconds), then press it again to turn the computer back
on.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Using the keyboard
Premium multimedia keyboard features
The keyboard has several different types of keys and buttons.
Your keyboard also has status indicators that show which
keyboard feature is active.
Function keys
Indicators
Editing buttons
Internet buttons
Audio playback buttons Navigation keys
Internet buttons
Application key Directional keys Numeric keypad
Windows keys
Feature
Icon
Description
Editing buttons
Function keys
Press these buttons to copy, cut, and paste.
Press these keys to start program actions. Each
program uses different function keys for
different purposes. See the program
documentation to find out more about the
function key actions.
Internet buttons
Press these buttons to launch your Internet
home page, search, or e-mail programs.
Audio playback
buttons
Press these buttons to play your audio files and
to adjust the volume.
Navigation keys
Press these keys to move the cursor to the
beginning of a line, to the end of a line, up the
page, down the page, to the beginning of a
document, or to the end of a document.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Feature
Icon
Description
Indicators
Show if your NUM LOCK, CAPS LOCK, or
SCROLL LOCK keys are activated. Press the
corresponding key to activate the function.
Windows keys
Application key
Press one of these keys to open the Windows
Start menu. These keys can also be used in
combination with other keys to open utilities like
F (Find/Search), R (Run), and E (Computer).
Press this key to access shortcut menus and help
assistants in Windows.
Directional keys
Numeric keypad
Press these keys to move the cursor up, down,
right, or left.
Press these keys to type numbers when the
numeric keypad (NUM LOCK) is turned on.
Elite multimedia keyboard features
The keyboard has several different types of keys and buttons.
Your keyboard also has status indicators that show which
keyboard feature is active.
Audio playback
Sleep button Function keys
Internet buttons
Indicators
buttons
Windows keys
Application key
Navigation keys Numeric keypad
24
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Feature
Icon
Description
Sleep button
Press this button to activate your computer’s
Sleep (power-saving) mode.
Function keys
Press these keys to start program actions.
Each program uses different function keys for
different purposes. See the program
documentation to find out more about the
function key actions.
Application buttons
Press these buttons to launch your Internet
home page, search for files, or launch the
calculator program.
Audio playback
buttons
Press these buttons to play your audio files
and to adjust the volume.
Indicators
Show if your NUM LOCK, CAPS LOCK, or
SCROLL LOCK keys are activated. Press the
corresponding key to activate the function.
Windows keys
Press one of these keys to open the Windows
Start menu. These keys can also be used in
combination with other keys to open utilities
like F (Find/Search), R (Run), and
E (Computer).
Application key
Press this key to access shortcut menus and
help assistants in Windows.
Editing buttons
Navigation keys
Press these buttons to copy, cut, and paste.
Press these keys to move the cursor to the
beginning of a line, to the end of a line, up the
page, down the page, to the beginning of a
document, or to the end of a document. Press
the arrow keys to move the cursor.
Numeric keypad
Press these keys to type numbers when the
numeric keypad (NUM LOCK) is turned on.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Using the mouse
Scroll wheel
Right button
Left button
The mouse is a device that controls the pointer movement on
the computer display. This illustration shows the standard
mouse.
As you move the mouse, the pointer (arrow) on the display
moves in the same direction.
You can use the left and right buttons on the mouse to select
objects on the display.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
You can use the scroll wheel on the mouse to move through
a document. This feature is not available in all programs.
To...
Do this...
Move the
Move the mouse around. If you
pointer on the
computer
display
reach the edge of your mouse
pad and need to move the
mouse farther, lift the mouse
and place it in the middle of the
mouse pad, then continue
moving the mouse.
Select an object
on the computer
display
Position the pointer over the
object. Quickly press and
release the left mouse button.
This is called clicking.
Start a program
or open a file or
folder
Position the pointer over the
object. Quickly press and
release the left mouse button
twice. This is called
double-clicking.
Access a
Position the pointer over the
object. Quickly press and
release the right mouse button
once. This is called
shortcut menu
or find more
information
about an object
on the display.
right-clicking.
Move an object
on the computer
display.
Position the pointer over the
object. Press the left mouse
button and hold it down. Move
(drag) the object to the
appropriate part of the
computer display. Release the
button to drop the object
where you want it. This is called
clicking and dragging.
For more information about how to adjust the double-click
speed, pointer speed, right-hand or left-hand configuration,
and other mouse settings, see the “Customizing Windows”
chapter in the online User Guide. For instructions on how to
clean the mouse, see “Cleaning the mouse” on page 59.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Adjusting the volume
You can adjust volume using the volume control buttons on
the right side of your computer or the Windows volume
controls. You can also adjust the volume of specific sound
devices in your computer.
To adjust the overall volume using hardware controls:
•
Press the + or - buttons on the right side of your
computer.
Volume up
Volume down
-OR-
If you are using external speakers, turn the knob on the
front of the speakers.
-OR-
Use the mute and volume control buttons on the
keyboard. For more information, see “Using the
keyboard” on page 23.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
To adjust the volume from Windows:
1
Click
(Volume) on the taskbar. The volume control
slider opens.
2
3
4
Click and drag the slider up to increase volume and
down to decrease volume.
To mute the volume, click (Mute). To restore volume,
click it again.
To adjust device volume levels, click Mixer. The Volume
Mixer dialog box opens, where you can click and drag
sliders for individual devices.
Tip
Adjust the Windows Sounds slider to change system sounds
volume independently of general volume (such as the volume used for
music and game sounds).
5
Click X in the top-right corner of the window to close it.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
Help
For more information about adjusting the volume, click Start,
then click Help and Support. Type ad ju stin g volum e in the Search
Help box, then press ENTER.
Configuring the audio jacks
If the side of your computer has five audio jacks, they are
universal jacks. This means that they can be used for more
than one purpose. For example, the blue jack on the computer
can be a stereo in jack or a stereo out jack. To use the audio
jacks for something other than the default audio device, you
need to configure the audio jacks.
To configure the audio jacks:
Shortcut
Start Ö Control Panel Ö Hardware and Sound Ö Sound Ö click the
device Ö Configure
1
2
3
Connect your audio device(s) to the computer audio
jack(s).
Click
(Start), then click Control Panel. The Control
Panel window opens.
Click Hardware and Sound, Sound, the Playback tab,
then click Configure.
-OR-
If your computer has the Realtek Sound Effect Manager
installed, double-click the Sound Effect Manager
icon
on the taskbar. The Realtek dialog box opens.
4
Follow the on-screen instructions to configure the audio
jacks for your speaker setup.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Installing a printer, scanner, or
other device
Important
Before you install a printer, scanner, or other peripheral device, see the
device documentation and installation instructions.
Your computer has one or more of the following ports:
IEEE 1394 (also known as Firewire®), Universal Serial Bus
(USB), serial, and parallel. You use these ports to connect
peripheral devices such as printers, scanners, and digital
cameras to your computer. For more information about port
locations, see “Checking Out Your Computer” on page 5.
IEEE 1394 and USB ports support plug-and-play and
hot-swapping, which means that your computer will usually
recognize such a device whenever you plug it into the
appropriate port. When you use an IEEE 1394 or USB device
for the first time, your computer will prompt you to install any
software the device needs. After doing this, you can
disconnect and reconnect the device at any time.
Help
For more information about installing peripheral devices, click Start, then
click Help and Support. Type in stallin g devices in the Search Help box,
then press ENTER.
Parallel and serial port devices are not plug-and-play. See the
device documentation for detailed information and
installation instructions.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 3: Setting Up and Getting Started
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Upgrading Your Computer
• Preventing static electricity discharge
• Opening the case
• Replacing the processor fan
• Installing memory
• Replacing the power supply
• Replacing the diskette drive
• Replacing an optical disc drive
• Replacing the memory card reader
• Replacing the hard drive
• Adding or replacing an expansion card
• Replacing the BIOS battery
• Replacing the system board
33
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
Preventing static electricity
discharge
Warning
To avoid exposure to dangerous electrical voltages and moving parts,
turn off your computer and unplug the power cord and modem and network
cables before opening the case.
To prevent risk of electric shock, do not insert any object into the vent holes
of the power supply.
The components inside your computer are extremely sensitive
to static electricity, also known as electrostatic discharge
(ESD).
Before opening the computer case, follow these guidelines:
•
Wear a grounding wrist strap (available at most
electronics stores) and attach it to a bare metal part of
your computer.
•
•
•
Turn off your computer.
Touch a bare metal surface on the side of the computer.
Unplug the power cord and the modem and network
cables.
Caution
ESD can permanently damage electrostatic discharge-sensitive
components in your computer. Prevent ESD damage by following ESD guidelines
every time you open the computer case.
Before working with computer components, follow these
guidelines:
•
Avoid static-causing surfaces such as carpeted floors,
plastic, and packing foam.
•
Remove components from their antistatic bags only
when you are ready to use them. Do not lay
components on the outside of antistatic bags because
only the inside of the bags provide electrostatic
protection.
•
Always hold expansion cards by their edges or their
metal mounting brackets. Avoid touching the edge
connectors and components on the cards. Never slide
expansion cards or components over any surface.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Opening the case
Your computer case provides easy access to internal
components.
Removing the back panel
Warning
To avoid exposure to dangerous electrical voltages and moving parts,
turn off your computer, then unplug the power cord and modem cable before
opening the case.
To remove the back panel:
1
Follow the instructions in “Preventing static electricity
discharge” on page 34.
2
Shut down your computer, then disconnect the power
cord and modem, network, and all peripheral device
cables.
3
Place your computer face-down on a clean, soft, dry
surface. (Although the photographs show the computer
upright, you should place your computer face-down
during servicing to avoid tipping it over.)
35
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
4
Pull both back panel release latches (one on each side
of the case) toward the back of the case, then lift the
back panel away from the case.
Replacing the back panel
To replace the back panel:
1
Slide the tabs on the top of the panel into the slots in
the top of the case.
Slots
2
Swing the lower part of the panel down and against the
computer until it clicks into place.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
You need to remove the processor fan to replace it or to access
system components that are behind the fan.
To replace the processor fan:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
2
Slide the processor fan’s release lever to the left.
3
Swing the top part of the fan away from the computer.
4
5
Rotate the fan down until it stops.
Unplug the fan’s power cable from the system board.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
6
Slide the fan out of the computer.
7
8
Slide the new fan into the computer. Make sure that you
line up the posts on the bottom with the guide slots
inside the case.
9
Rotate the fan up until it lays flat against the computer
and clicks into place.
10 Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
When you upgrade the computer memory, make sure that you
install the correct type of memory module for your computer.
Your computer uses DIMM memory.
To install or replace DIMM memory:
1
2
3
Remove the back panel by following the instructions in
“Opening the case” on page 35.
Remove the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
Find the memory module banks on your system board.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
4
If you are removing a DIMM from the memory module
bank, gently pull the plastic tabs away from the sides
of the memory module and remove it.
- OR -
If you are adding a DIMM to an empty memory module
bank, gently pull the plastic tabs away from the sides
of the memory module bank.
5
Align the notches on the new DIMM with the notches
on the memory module bank and press the module
firmly into the bank until the module clicks into place.
The tabs on the sides of the memory module should
secure the memory module automatically.
6
7
Replace the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
8
9
Return your computer to its upright position.
Reconnect the cables and the power cord.
10 Turn on your computer. Windows starts and the
Windows desktop appears.
11 Click
(Start), right-click Computer, then click
Properties. The amount of memory in your computer
is displayed.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
Replacing the power supply
To replace the power supply:
1
2
3
Remove the back panel by following the instructions in
“Opening the case” on page 35.
Remove the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
Unplug the power supply from the system board.
4
Pull the power supply release lever out (toward you)
until the power supply slides freely, then slide the
power supply out of the computer.
5
Slide the new power supply into the power supply bay
until it clicks into place.
6
7
Plug the new power supply into the system board.
Replace the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
8
Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
Replacing the diskette drive
To replace the diskette (floppy) drive:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
2
Remove the power supply by following the instructions
in “Replacing the power supply” on page 40. You do not
need to unplug the power supply from the system
board.
3
Pull the diskette drive release latch out (toward you).
41
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
4
Slide the diskette drive out (toward you) until it stops,
then unplug the cables from the drive.
5
6
Return your computer to its upright position, then slide
Slide the new drive into the computer from the front
(away from you) to lock the drive into place.
7
8
9
Lay the computer face-down, then reconnect the cables
to the drive.
Replace the power supply by following the instructions
in “Replacing the power supply” on page 40.
Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
Replacing an optical disc drive
To add replace an optical drive:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
2
Pull the optical drive release latch out (toward you).
3
Unplug the cables from the optical drive.
4
5
Return your computer to its upright position, then slide
Slide the new drive into the computer from the front
until the front of the drive is flush with the front of the
computer, then slide the drive release lever forward
(away from you) to lock the drive into place.
6
7
Lay the computer face-down, then reconnect the cables
to the drive.
Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
card reader
To replace the memory card reader:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
2
Remove the power supply by following the instructions
in “Replacing the power supply” on page 40. You do not
need to unplug the power supply from the system
board.
3
4
Pull the card reader release latch out (toward you).
Slide the card reader out (toward you) until it stops, then
unplug the cable from the drive.
5
6
Return your computer to its upright position, then slide
the card reader out the front of the computer.
Slide the new card reader into the computer from the
front until the front of the reader is flush with the front
place.
7
8
9
Lay the computer face-down, then reconnect the cable
to the card reader.
Replace the power supply by following the instructions
in “Replacing the power supply” on page 40.
Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Replacing the hard drive
To replace the hard drive:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
2
Unplug the cables from the hard drive.
3
Push the hard drive release lever to the left, then pull
the lever out (toward you) as far as the lever will go.
The lever pulls the hard drive out.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
4
Grasp the hard drive itself, then pull it the rest of the
way out of your computer.
5
Make sure the hard drive release lever is still fully
extended, then slide the new hard drive all the way into
the hard drive bay by pushing on the hard drive itself
(not the lever). Make sure that you slide the drive in
until it is flush with the edge of the hard drive bay.
6
7
Reconnect the cables to the drive.
Replace the back panel by following the instructions in
8
9
Reconnect all external cables and the power cord.
Turn on your computer.
10 If you are using the new hard drive as your primary
drive, install Windows using the operating system DVD
that came with your computer. For more information on
restoring your system, see “Recovering your system”
on page 89.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Adding or replacing an
expansion card
or a video card in your computer.
Installing a half-height expansion card
To install a half-heght expansion card:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
2
Remove the PCI riser card assembly by pulling on its
green handle.
Caution
Do not touch the contacts on the bottom part of the expansion
card. Touching the contacts can cause electrostatic damage to the card.
3
Slide a half-height PCI card into the half-height PCI slot.
You can slightly seesaw the card end-to-end to help
insert the card, but do not bend the card sideways.
Half-height PCI slot
47
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
4
5
Replace the PCI riser card by sliding it back into place.
“Replacing the back panel” on page 36.
Installing a full-height expansion card
To install a full-height expansion card:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
2
Remove the PCI riser card by pulling on its green handle.
Caution
Do not touch the contacts on the bottom part of the expansion
card. Touching the contacts can cause electrostatic damage to the card.
3
Press the two tabs on the card retention lever together,
then lift the card retention lever out of the way.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
4
Remove the metal EMI shield next to the slot you are
adding a card to. The PCI card slot is the slot furthest
from the riser card handle, and the graphics card slot
is the slot closest to the handle.
5
Slide a PCI card into the PCI slot, or slide a graphics card
into the graphics card slot. You can slightly seesaw the
card end-to-end to help insert the card, but do not bend
the card sideways.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
6
Press the card retention lever down until it clicks into
place.
7
8
Replace the PCI riser card by sliding it back into place.
Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
Replacing the BIOS battery
Warning
Danger of explosion if battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of
used batteries following the manufacturer’s instructions.
If the computer clock does not keep time or the settings in
the BIOS Setup utility are not saved when you turn off your
computer, replace the system battery. Use a battery of the
same size and voltage as the original battery that was in your
computer.
To replace the battery:
1
2
During the restart, press and hold the F1 key. The main
menu of the BIOS Setup utility opens.
3
Because changing the BIOS battery will reset the BIOS
to factory default settings, write down the values you
may have changed from the factory settings, then exit
from the utility.
4
5
Remove the back panel by following the instructions in
“Opening the case” on page 35.
Remove the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
6
Locate the old battery on the system board and note
its orientation. You will need to install the new battery
the same way.
7
8
the socket.
Make sure that the positive (+) side of the new battery
is facing up, then press the battery into the socket until
it snaps into place.
9
Replace the processor fan by following the instructions
10 Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
11 Reconnect all external cables and the power cord.
12 Turn on your computer, and press F2 during startup to
open the BIOS Setup utility.
13 In the BIOS Setup utility, restore any settings that you
wrote down in Step 3.
14 Save all your settings and exit the BIOS Setup utility.
To replace the system board:
1
Remove the back panel by following the instructions in
“Opening the case” on page 35.
2
Remove the riser card assembly by following the
instructions in “Adding or replacing an expansion card”
on page 47.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
3
4
Remove the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
Loosen the four screws that secure the heat sink to the
processor, then remove the heat sink. The screws are
captive screws, so they will not fall out of the heat sink.
Heat sink screws
Heat sink screws
5
Disconnect the power and data cables from the system
board, noting their locations and orientation. (You will
reconnect the cables after you install the new board.)
You can also mark the cables with tape labels to simplify
reconnecting cables later.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
6
Remove the seven screws that secure the system board
to the case.
Screws
Screws
7
8
9
Slide the system board to the right until it slides free
from the case, then remove it completely from the case.
Slide the new system board into place, then replace the
screws.
10 Replace the processor fan by following the instructions
in “Replacing the processor fan” on page 37.
11 Replace the riser card assembly by following the
instructions in “Adding or replacing an expansion card”
on page 47.
12 Replace the back panel by following the instructions in
“Replacing the back panel” on page 36.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 4: Upgrading Your Computer
54
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
Setting up a maintenance
schedule
Use the following table to set up a regular maintenance
schedule.
Maintenance task
Weekly Monthly
When
needed
Check for viruses
X
X
X
X
X
X
X
X
X
X
X
Run Windows Update
Manage hard drive space
Clean up hard drives
Scan hard drive for errors
Defragment hard drive
Back up files
X
X
X
X
X
Clean computer case and
peripheral devices
Caring for your computer
To extend the life of your computer:
•
Be careful not to bump or drop your computer, and do
not put any objects on top of it. The case, although
strong, is not made to support extra weight.
•
•
•
When transporting your computer, we recommend that
you put it in the original packaging materials.
Keep your computer away from magnetic fields.
Magnetic fields can erase data on hard drives.
Never turn off your computer when the drive indicator
is on because data on the hard drive could be lost or
corrupted.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
•
•
Avoid subjecting your computer to extreme
temperature changes. The case can become brittle and
easy to break in cold temperatures and can melt or
warp in high temperatures. Damage due to either
extreme is not covered by your warranty. As a general
rule, your computer is safest at temperatures that are
comfortable for you.
Keep all liquids away from your computer. When spilled
onto computer components, almost any liquid can
result in expensive repairs that are not covered under
a standard warranty.
•
•
Avoid dusty or dirty work environments. Dust and dirt
can clog the internal mechanisms and can lead to
permanent damage to the computer.
Do not block the ventilation fan slots. If these slots are
blocked, your computer may overheat, resulting in
unexpected shutdown or permanent damage to the
computer.
•
When storing your computer for an extended period of
time, unplug AC power.
Cleaning your computer
Keeping your computer clean and the vents free from dust
helps keep your computer performing at its best. You may
want to gather these items and put together a computer
cleaning kit:
•
•
A soft, lint-free cloth
An aerosol can of air that has a narrow, straw-like
extension
•
•
Cotton swabs
An optical disc drive cleaning kit
57
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
Cleaning the exterior
Warning
When you shut down your computer, the power turns off, but some
electrical current still flows through it. To avoid possible injury from electrical
shock, unplug the power cord, modem cable, and network cable from the wall
outlets.
•
•
Always turn off your computer and other peripheral
devices before cleaning any components.
Use a damp, lint-free cloth to clean your computer and
other parts of your system. Do not use household
abrasive or solvent cleaners because they can damage
the finish on components.
•
Your computer is cooled by air circulated through the
vents on the case, so keep the vents free of dust. With
your computer turned off and unplugged, brush the
dust away from the vents with a damp cloth. Be careful
not to drip any water into the vents.
Cleaning the keyboard
You should occasionally clean the keyboard to remove dust
and lint trapped under the keys.
To clean the keyboard:
1
Use an aerosol can of air with a narrow, straw-like
extension to remove dust and lint trapped under the
keys.
2
If you spill liquid on the keyboard, turn off your
computer and turn the keyboard upside down. Let the
liquid drain, then let the keyboard dry before trying to
use it again. If the keyboard does not work after it dries,
you may need to replace it.
Cleaning the monitor
Caution
A flat-panel display is made of specially coated glass and can be
scratched or damaged by abrasive or ammonia-based glass cleaners.
To clean the screen:
•
To clean the screen, use a soft cloth and water to clean
the screen. Dampen the cloth (never apply liquid
directly to the screen), then wipe the screen with the
cloth.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Cleaning the mouse
If the mouse pointer begins moving erratically across the
computer screen or becomes difficult to control precisely,
cleaning the mouse will likely improve its accuracy.
To clean the mouse:
•
Wipe the bottom of the mouse with a damp, lint-free
cloth.
Cleaning optical discs
Optical discs (CDs, DVDs, and Blu-ray Discs) get dirty from
frequent handling.
To clean an optical disc:
•
Wipe from the center to the edge, not around in a circle,
using a product made especially for the purpose.
Updating Windows
Windows Update helps you keep your computer up-to-date.
Use Windows Update to choose updates for your computer’s
operating system, software, and hardware. New content is
added to the site regularly, so you can always get the most
recent updates and fixes to protect your computer and keep
it running smoothly. Windows Update scans your computer
and provides you with a tailored selection of updates that
apply only to the software and hardware on your computer.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
For information on running Windows Update, see “Windows
Update” in the online User Guide. Windows Update can also
be controlled through the Windows Security Center. For more
information, see “Protecting Your Computer” in the online
User Guide.
Help
For more information about Windows Update, click Start, then click Help
and Support. Type w in d ow s u pd ate in the Search Help box, then
press ENTER.
Using BigFix
BigFix monitors your computer for problems and conflicts. It
automatically gathers information about the latest bugs,
security alerts, and updates from BigFix sites on the Internet.
Whenever BigFix detects a problem, it alerts you by flashing
the blue taskbar icon. To fix the problem, click on that icon
to open BigFix.
To start BigFix:
1
Click
(Start), All Programs, Accessories, System
Tools, then click BigFix.
2
To learn more about BigFix, click Help, then click
Tutorial.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Managing hard drive space
Windows provides several utilities you can use to check hard
drive space, delete unnecessary files, defragment files, and
back up files.
Checking hard drive space
To check hard drive space:
Shortcut
Start Ö Computer Ö right-click drive Ö Properties
1
Click
(Start) then click Computer. The Computer
window opens.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
2
Right-click the drive that you want to check for available
file space, then click Properties. Drive space
information appears.
Deleting unnecessary files
Delete unnecessary files, such as temporary files and files in
the Recycle Bin, to free hard drive space.
To delete unnecessary files:
Shortcut
Start Ö Computer Ö right-click drive Ö Properties Ö
Disk Cleanup
1
Click
(Start), All Programs, Accessories, System
Tools, then click Disk Cleanup. The Disk Cleanup dialog
box opens.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
2
3
Click one of the options:
• My files only cleans only the folders for the
currently logged in user.
• Files from all users on this computer cleans all
folders.
The Disk Cleanup dialog box opens.
Click to select the types of files you want to delete, then
click OK. The types of files you indicated are deleted.
Help
For more information about keeping the hard drive free of
unnecessary files, click Start, then click Help and Support. Type d isk
clean up in the Search Help box, then press ENTER.
Checking the hard drive for errors
The Error-checking program examines the hard drive for
physical flaws and file and folder problems. This program
corrects file and folder problems and marks flawed areas on
the hard drive so Windows does not use them.
If you use your computer several hours every day, you
probably want to run Error-checking once a week. If you use
your computer less frequently, once a month may be
adequate. Also use Error-checking if you encounter hard drive
problems.
To check the hard drive for errors:
1
Click
(Start) then click Computer. The Computer
window opens.
2
Right-click the drive that you want to check for errors,
click Properties, then click the Tools tab.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
3
Click Check Now, then click Start. Your drive is checked
for errors. This process may take several minutes.
Important
Error checking cannot scan a drive while the drive is being used,
so if you try to check your hard drive for errors, you see a prompt asking
you if you want to scan the hard drive later (the next time you restart
your computer). If you see this prompt, click Schedule disc check, then
restart your computer.
After Windows has finished checking the drive for
errors, it provides a summary of the problems that it
found.
4
5
Correct any problems that are found by following the
on-screen instructions.
Click OK.
Help
For more information about checking the hard drive for errors,
click Start, then click Help and Support. Type ch eckin g for d isk
errors in the Search Help box, then press ENTER.
Defragmenting the hard drive
When working with files, sometimes Windows divides the file
information into pieces and stores them in different places on
the hard drive. This is called fragmentation, and it is normal.
In order for your computer to use a file, Windows must search
for the pieces of the file and put them back together. This
process slows the hard drive performance.
Disk Defragmenter organizes the data on the drive so each
file is stored as one unit rather than as multiple pieces
scattered across different areas of the drive. Defragmenting
the information stored on the drive can improve hard drive
performance.
While Disk Defragmenter is running, do not use your keyboard
or mouse because using them may continuously stop and
restart the defragmenting process. Also, if you are connected
to a network, log off before starting Disk Defragmenter.
Network communication may stop the defragmentation
process and cause it to start over.
Tip
Because defragmenting a drive may take hours to complete (depending
on the size of the drive being defragmented), consider starting the process
when you will not need the computer for several hours.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
To defragment the hard drive:
1
2
Disconnect your computer from the network.
Click
(Start), All Programs, Accessories, System
Tools, then click Disk Defragmenter. The Disk
Defragmenter dialog box opens.
3
Click Defragment now. This process may take hours to
complete, depending on the size of the drive being
defragmented.
Help
For more information about defragmenting the hard drive, click
Start, then click Help and Support. Type defragm en tin g in the
Search Help box, then press ENTER.
Backing up files
Backing up files and removing them from the hard drive frees
space for new files on the hard drive. It also protects you from
losing important information if the hard drive fails or you
accidentally delete files.
You should back up your files regularly to a writable optical
disc (if you have a recordable drive). Use a backup device, such
as a recordable disc drive, to do a complete hard drive backup.
If you do not have a high-capacity backup device and you
want to purchase one, you can visit the Accessories Store at
www.gateway.com.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
To back up files:
1
Click
(Start) then click Computer. The Computer
window opens.
2
Right-click the drive that you want to back up, click
Properties, then click the Tools tab.
3
4
Click Backup Now, then click Run a file backup now.
Follow the on-screen instructions to select a backup
storage location and the files and folders to back up.
Help
For more information about backing up files, click Start, then
click Help and Support. Type backu p in the Search Help box, then
press ENTER.
Scheduling maintenance tasks
Task Scheduler lets you schedule maintenance tasks such as
running Disk Defragmenter and checking your drives for
errors.
Important
Your computer must be on during scheduled tasks. If your computer is
off, scheduled tasks will not run.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
To start the Task Scheduler:
1
Click
(Start), All Programs, Accessories, System
Tools, then click Task Scheduler. The Task Scheduler
dialog box opens.
2
Click Create Basic Task for basic tasks or click Create
Task for more complex tasks, then follow the on-screen
instructions to finish setting up and scheduling the task.
Help
For more information about scheduling tasks, click Start, then
click Help and Support. Type task sch ed u ler in the Search Help
box, then press ENTER.
Moving from your old
computer
Moving with Windows Easy Transfer
You can move your files, folders, software settings, and user
account settings (such as display, Internet, and e-mail settings)
from your old computer to your new one using Windows Easy
Transfer, providing your old computer uses Windows XP or
Windows Vista.
While using Windows Easy Transfer, you will not be able to
run other tasks on the computers.
Important
If your old computer does not use Windows XP or Windows Vista™, you
must manually move your data by using a writeable disc, flash drive, external
hard drive, or network drive.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
To move files and settings from your old computer:
1
If you want to transfer program settings to your new
computer, install those programs on the new computer
before running Windows Easy Transfer. Windows Easy
Transfer copies only the software’s settings, not the
software itself, to the new computer.
2
3
Click
(Start), All Programs, Accessories, System
Tools, then click Windows Easy Transfer. The Windows
Easy Transfer dialog box opens.
Click Next, click Start a new transfer, then follow the
on-screen instructions to complete the transfer.
Help
For more information about transferring files, click Start, then
click Help and Support. Type tran sferrin g files in the Search Help
box, then press ENTER.
Moving files and settings manually
You can manually transfer your personal data files by copying
them to a network location or to removable media, such as
a writable disc, an external hard drive, a network location, or
a flash drive.
Finding your documents
Many programs save your personal data files in the
Documents or My Documents folder. Look in your old
computer’s documents folder for personal data files.
To find files in the documents folder:
1
In Windows Vista, click
(Start), then click
Documents. The Documents folder opens and displays
many of your saved personal data files. Go to Step 4.
- OR -
In Windows XP, click Start, then click My Documents.
The My Documents window opens and displays many
of your saved personal data files. Go to Step 4.
- OR -
In Windows 98, Windows Me, or Windows 2000,
double-click the My Computer icon on the desktop. Go
to the next step.
2
Double-click the C:\ drive icon.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
3
4
Double-click the My Documents folder. The My
Documents window opens and displays many of your
saved personal data files.
Copy your personal data files to removable media or to
another computer on your network.
Finding other files
Use Windows Find or Search to locate other personal data
files. For more information, see the online User Guide.
You can often identify different data file types by looking at
the file’s extension (the part of the file name following the last
period). For example, a document file might have a .DOC
extension and a spreadsheet file might have an .XLS
extension.
File type
File usually ends in...
Documents
Spreadsheets
Pictures
.DOC, .TXT, .RTF, .HTM, .HTML, .DOT
.XLS, .XLT, .TXT
.JPG, .BMP, .GIF, .PDF, .PCT, .TIF, .PNG, .EPS
.MPEG, .MPG, .AVI, .GIF, .MOV
.WAV, .CDA, .MP3, .MID, .MIDI, .WMA
Movies
Sound and music
To find files using Find or Search:
1
In Windows Vista, click
(Start), then click Search.
The Search Results window opens.
- OR -
In Windows XP, click Start, then click Search. The
Search Results window opens.
- OR -
In Windows 98, Windows Me, or Windows 2000, click
Start, Find or Search, then click For Files or Folders.
The Search Results window opens.
2
3
Type the filename you want to search for, then press
ENTER. The search results are displayed.
To learn about more search options, click Help.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 5: Maintaining Your Computer
70
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
Safety guidelines
While troubleshooting your computer, follow these safety
guidelines:
Warning
Never remove your computer case cover while your computer is turned
on and while the modem cable, network cable, and power cord are connected.
Warning
Make sure that you are correctly grounded before accessing internal
components. For more information about preventing damage from static
electricity, see “Preventing static electricity discharge” on page 34.
Warning
To avoid bodily injury, do not attempt to troubleshoot your computer
problem if:
- Power cords or plugs are damaged
- Liquid has been spilled into your computer
- Your computer was dropped
- The case was damaged
Instead, unplug your computer and contact a qualified computer technician.
First steps
If you have problems with your computer, try these things
first:
•
Make sure that the power cord is connected to your
computer and an AC outlet and that the AC outlet is
supplying power.
•
•
If you use a power strip or surge protector, make sure
that it is turned on.
If a peripheral device (such as a keyboard or mouse)
does not work, make sure that all connections are
secure.
•
•
Make sure that your hard drive is not full.
If an error message appears on the screen, write down
the exact message. The message may help Gateway
Customer Care in diagnosing and fixing the problem.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
•
•
If you added or removed peripheral devices, review the
installation procedures you performed and make sure
that you followed each instruction.
If an error occurs in a program, see the program’s
printed documentation or the online help.
Help
For more information about troubleshooting, click Start, then
click Help and Support. Type trou blesh ootin g in the Search Help
box, then press ENTER.
Troubleshooting
Troubleshooting topics are listed in alphabetical order.
Add-in cards
The computer does not recognize an add-in card
•
•
Shut down and restart your computer.
Make sure that you have installed the required
software. For more information, see the documentation
that came with your add-in card.
Audio
CD or DVD drives
See “Sound” on page 88.
The computer does not recognize a disc or the CD or DVD
drive
•
•
Make sure that the disc label is facing up, then try again.
Try a different disc. Occasionally discs are flawed or
become scratched and cannot be read by the CD or DVD
drive.
•
•
•
If you are trying to play a DVD, make sure that you have
a DVD drive. To identify your drive type, see the “Using
Drives and Media Files” chapter in the online User Guide.
Your computer may be experiencing some temporary
memory problems. Shut down and restart your
computer.
Some music CDs have copy protection software. You
may not be able to play these CDs on your computer.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
•
•
Clean the disc. For more information, see “Cleaning
optical discs” on page 59.
Restart your computer, then enter the BIOS Setup utility
by pressing and holding F2 while your computer
restarts. Make sure that the IDE controllers are enabled.
•
•
Make sure that the drive is configured correctly by
following the instructions in the drive documentation.
Reinstall the device driver.
An audio CD does not produce sound
•
•
Some music CDs have copy protection software. You
may not be able to play these CDs on your computer.
•
•
•
Make sure that the volume controls are turned up. For
more information, see “Adjusting the volume” on
Make sure that the mute controls are turned off. For
more information, see “Adjusting the volume” on
page 28.
Make sure that the speaker cables are connected
correctly and securely.
•
•
Shut down and restart your computer.
Clean the disc. For more information, see “Cleaning
optical discs” on page 59.
•
Reinstall the audio device drivers.
A DVD movie will not play
•
drive type, see the “Using Drives and Media Files”
chapter in the online User Guide..
•
•
Make sure that the disc label is facing up, then try again.
Try a different disc. Occasionally discs are flawed or
become scratched and cannot be read by the DVD drive.
•
•
Shut down and restart your computer.
Clean the disc. For more information, see “Cleaning
optical discs” on page 59.
•
•
Reinstall the device driver.
Make sure that the DVD program has been installed on
your computer.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
•
DVDs and DVD drives contain regional codes that help
control DVD title exports and help reduce illegal disc
distribution. To be able to play a DVD, the disc’s regional
code and your DVD drive’s regional code must match.
The regional code on your DVD drive is determined by
your computer’s delivery address. The regional code for
the United States and Canada is 1. The regional code for
Mexico is 4. Your DVD drive’s regional code must match
the regional code for the disc. The regional code for the
disc is on the disc, disc documentation, or disc
packaging.
If the DVD movie does not play, the disc’s regional code
and your DVD drive’s regional code may not match.
Diskette drive
The diskette drive is not recognized
• Shut down and restart your computer.
You cannot save a file to diskette or you see the message
“disk is full or write-protected”
• Make sure that the write-protection tab on the
upper-right corner of the diskette is down
(unprotected).
again.
• Make sure that the diskette you are using is
IBM-compatible.
• Try a different diskette. Occasionally diskettes are
flawed and cannot be read by the diskette drive.
• Run Error-checking on the diskette. For more
information, see “Checking the hard drive for errors”
on page 63. If errors are detected and corrected, try
using the diskette again.
You see an “Access Denied” or “Write protect” error
message
• Move the write-protection tab in the upper-right
corner of the diskette down (unprotected).
• The diskette may be full. Delete unnecessary files on
the diskette and try again.
• Make sure that the diskette you are using is
IBM-compatible.
• Try a different diskette. Occasionally diskettes are
flawed and cannot be read by the diskette drive.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
You see a “Disk is full” error message
• Delete unnecessary files on the diskette.
• Try a different diskette. Occasionally diskettes are
flawed and cannot be read by the diskette drive.
• Run Error Checking on the diskette. For more
information, see “Checking the hard drive for errors”
on page 63.
You see a “Non-system disk” or “Disk error” error message
• Eject the diskette from the diskette drive, then press
ENTER.
• Make sure that the diskette you are using is
IBM-compatible.
The diskette drive LED is lit continuously
• Remove the diskette from the drive. If the light stays
on, try restarting your computer.
DVD drives
•
See “CD or DVD drives” on page 73.
Ethernet
You cannot see the other computers on your network
•
Make sure that your Ethernet cable is plugged into the
Ethernet jack on your computer. Make sure that the
other end is plugged into a router.
•
•
Make sure that all computers are plugged into a
powered electrical outlet and turned on.
Make sure that the router is plugged into a powered
electrical outlet and turned on. Most routers have lights
that indicate they are working. For more information,
see the documentation that came with your router.
•
•
•
Make sure that all computers on your network have the
same workgroup name.
Make sure that all computers are using the same Subnet
Mask.
If you assigned IP addresses to the computers, make
sure that all computers have different IP addresses. For
home networks, IP addresses should be 192.168.N.N
where N is a number you assign between 0 and 254.
The first N should be the same for all computers on your
network and the second N should be different for all
computers on your network.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
The computer does not recognize an add-in Ethernet card
•
•
Shut down and restart your computer.
Make sure that you have installed the required
software. For more information, see the documentation
that came with your Ethernet card.
•
Reseat the card. For more information, about opening
your computer case, see your hardware reference. For
more information about your Ethernet card, see the
documentation that came with your Ethernet card.
Your Ethernet network is running slower than you expect
•
If your Ethernet network is running slower than you
expect, check the speed of each Ethernet component.
For best results, all Ethernet components should be
standard Ethernet (10 Mbps), Fast Ethernet (100 Mbps
or 10/100 Mbps), or Gigabit Ethernet (1000 Mbps or
10/100/1000 Mbps). A mixture of Ethernet, Fast
Ethernet, and Gigabit Ethernet components will result
in your network running at the slowest component
speed.
File management
Help
For more information about restoring deleted files, click Start, then click
Help and Support. Type System Restore in the Search Help box, then
press ENTER.
A file was accidentally deleted
If a file was deleted while holding down the SHIFT key, the file
cannot be restored.
To restore deleted files:
1
2
Double-click the Recycle Bin icon.
Right-click the file you want to restore, then click
Restore. The file is restored to the place where it
was originally deleted from.
If the Recycle Bin was emptied before you try to
restore a file, the file cannot be restored.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
Hard drive
You see an “Insufficient disk space” error message
•
Delete unnecessary files from the hard drive using Disk
Cleanup. For instructions on deleting unnecessary files,
see “Deleting unnecessary files” on page 62.
Help
For more information about file management, click Start,
then click Help and Support. Type file m an agem en t in the
Search Help box, then press ENTER.
•
•
Empty the Recycle Bin by right-clicking the Recycle Bin
icon, then clicking Empty Recycle Bin.
Caution
All deleted files will be lost when you empty the Recycle Bin.
Save your files to another drive. If the hard drive is full,
copy any files not regularly used to backup media, then
delete them from the hard drive.
You see a “Data error” message
•
This may be the result of a defective area on the hard
drive. To fix hard drive problems, run the Error checking
program. For instructions on fixing hard drive problems,
see “Checking the hard drive for errors” on page 63.
The hard drive cannot be accessed, or you see a “General
failure reading drive C” error message
•
If your computer has been subjected to static electricity
or physical shock, you may need to reinstall the
operating system.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Internet
See also “Modem (dial-up)” on page 81.
You cannot connect to the Internet
•
If you are using a dial-up modem, make sure that the
modem cable is plugged into the modem jack and not
the Ethernet network jack. See your setup poster to
make sure that the connections have been made
correctly.
- OR -
If you are using a cable or DSL modem, make sure that
the modem cable is plugged into the Ethernet network
make sure that the connections have been made
correctly.
•
•
Make sure that your account with your Internet service
provider (ISP) is set up correctly. Contact your ISP
technical support for help.
Make sure that you do not have a problem with your
modem. For more information, “Modem (dial-up)” on
page 81.
Help
For more information about troubleshooting Internet
connections, click Start, then click Help and Support. Type
trou blesh ootin g con n ection s in the Search Help box, then
press ENTER.
You see an “Unable to locate host” message and are unable
to browse the Internet
•
This problem can occur when you have typed a URL
(Web address) incorrectly, you have lost your Internet
connection, or your ISP is having technical difficulties.
•
Double-check the URL or try a different URL. If the error
message still appears, disconnect from the ISP
connection and close your browser, then reconnect and
open the browser. If you still get the error, your ISP may
be having technical difficulties.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
Connecting to a Web site takes too long
Many factors can affect Internet performance:
•
The condition of the telephone lines in your residence
or at your local telephone service
•
The condition of the Internet computers to which you
connect and the number of users accessing those
computers
•
•
The complexity of graphics and multimedia on Web
pages
Having multiple Web browsers open, performing
multiple downloads, and having multiple programs
open on your computer
People are sending you e-mail messages, but you have not
received any mail
•
•
Click the receive button in your e-mail program.
Make sure that your account with your Internet service
provider (ISP) is set up correctly. Contact your ISP for
technical support.
Keyboard
The keyboard does not work
•
Make sure that the keyboard cable is plugged in
correctly. For more information, see the poster that
came with your computer.
•
•
Remove all extension cables and switch boxes.
Clean the keyboard by using an aerosol can of air with
a narrow, straw-like extension to remove dust and lint
trapped under the keys.
•
•
Try a keyboard that you know works to make sure that
the keyboard port works.
Reinstall the keyboard device driver.
A keyboard character keeps repeating or you see a
“keyboard stuck” or “key failure” error message
•
•
Make sure that nothing is resting on the keyboard.
Make sure that a key is not stuck. Press each key to
loosen a key that might be stuck, then restart your
computer.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Liquid spilled in the keyboard
•
If you spilled liquid in the keyboard, turn off your
computer and unplug the keyboard. Clean the keyboard
and turn it upside down to drain it. Let the keyboard
dry before using it again. If the keyboard does not work
after it dries, you may need to replace it.
Memory card reader
Drive letters for the memory card slots do not appear in
the My Computer window
Reboot your computer.
•
Modem (cable or DSL)
•
See the documentation that came with your modem for
additional troubleshooting information.
Modem (dial-up)
See also “Internet” on page 79.
Your modem does not dial or does not connect
•
Make sure that the modem cable is plugged into the
modem jack and not the Ethernet network jack. See
your setup poster to make sure that the connections
have been made correctly.
•
•
•
Make sure that your computer is connected to the
telephone line and the telephone line has a dial tone.
Make sure that the modem cable is less than 6 feet
(1.8 meters) long.
Remove any line splitters or surge protectors from your
telephone line, then check for a dial tone by plugging
a working telephone into the telephone wall jack.
•
If you have additional telephone services such as call
waiting, call messaging, or voice mail, make sure that
all messages are cleared and call waiting is disabled
before using the modem. Contact your telephone
service to get the correct code to temporarily disable
the service. Also make sure that the modem dialing
properties are set correctly.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
To check the dialing properties:
1
Click
(Start), then click Control Panel. The
Control Panel window opens.
2
Click Hardware and Sound, then click Phone and
Modem Options. The Phone and Modem Options
dialog box opens.
3
If this is the first time you have accessed this
category, the Location Information dialog box
opens. Enter the information for your area, then
click OK.
4
5
Click the Dialing Rules tab, click the location from
which you are dialing, then click Edit.
Make sure that all settings are correct.
Help
For more information about dialing properties, click Start, then
click Help and Support. Type dialin g in the Search Help box, then
press ENTER.
•
Disconnect any answering machine, fax machine, or
printer that is on the same line as the modem. Do not
connect these devices to the same telephone line as the
modem.
•
•
Make sure that you are not using a digital, rollover, or
PBX line. These lines do not work with your modem.
Check for line noise (scratchy, crackling, or popping
sounds). Line noise is a common problem that can cause
the modem to connect at a slower rate, abort
downloads, or even disconnect. The faster the modem,
the less line noise it can tolerate and still work correctly.
Listen to the line using your telephone. Dial a single
number (such as 1). When the dial tone stops, listen for
line noise. Wiggle the modem cable to see if that makes
a difference. Make sure that the connectors are free
from corrosion and all screws in the wall or telephone
wall jack are secure.
You can also call your telephone service and have the
telephone line checked for noise or low line levels.
•
•
Try another telephone line (either a different telephone
number in your house or a telephone line at a different
location). If you can connect on this line, call your
telephone service.
Try connecting with the modem at a lower connection
speed. If reducing the connect speed lets you connect,
call your telephone service. The telephone line may be
too noisy.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
You cannot connect to the Internet
•
The ISP may be having technical difficulties. Contact
your ISP for technical support.
•
See if the modem works with a different
communications program. The problem may be with
just one program.
•
Review the troubleshooting information under
“Internet” on page 79.
Your 56K modem does not connect at 56K
Current FCC regulations restrict actual data transfer rates over
public telephone lines to 53K. Other factors, such as line noise,
telephone service provider equipment, or ISP limitations, may
lower the speed even further.
If your computer has a v.90 modem, the speed at which you
can upload (send) data is limited to 33.6K. If your computer
has a v.92 modem, the speed at which you can upload data
is limited to 48K. Your ISP may not support 48K uploads.
Your fax communications program only sends and receives
faxes at 14,400 bps when you have a 56K modem
•
Current fax technology only supports a maximum send
and receive rate of 14,400 bps.
The modem is not recognized by your computer
•
•
•
Make sure that the line connected to the modem is
working and plugged into the appropriate port on your
computer. See your setup poster to make sure that the
connections have been made correctly.
If the modem shares the telephone line with another
device, make sure that the telephone line is not in use
(for example, someone is on the telephone, or another
modem is in use).
Use the modem cable that came with your computer.
Some telephone cables do not meet cable standards and
may cause problems with the connection.
•
•
Shut down and restart your computer.
Run Windows modem diagnostics.
To run modem diagnostics:
1
2
Close all open programs.
Click
(Start), then click Control Panel. The
Control Panel window opens.
3
Click Hardware and Sound, then click Phone and
Modem Options. The Phone and Modem Options
dialog box opens.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
4
5
Click the Modems tab, click your modem, then click
Properties. The Modem Properties dialog box
opens.
Click the Diagnostic tab, then click Query Modem.
If information about the modem appears, the
modem passed diagnostics. If no modem
information is available, a white screen appears with
no data, or if you get an error such as port already
open or the modem has failed to respond, the
modem did not pass diagnostics.
Help
For more information about modem troubleshooting, click Start,
then click Help and Support. Type m od em trou blesh ootin g in the
Search Help box, then press ENTER.
The modem is noisy when it dials and connects
When your modem tries to connect to another modem, it
begins handshaking. Handshaking is a digital “getting
acquainted” conversation between the two modems that
establishes connection speeds and communication protocols.
You may hear unusual handshaking sounds when the modems
first connect. If the handshaking sounds are too loud, you can
turn down the modem volume.
To turn down the modem volume:
1
Click
(Start), then click Control Panel. The
Control Panel window opens.
2
Click Hardware and Sound, then click Phone and
Modem Options. The Phone and Modem Options
dialog box opens.
3
4
5
Click the Modems tab, click the modem you want
to adjust, then click Properties.
Click the Modem tab, then adjust the Speaker
volume control.
Click OK twice to close the Phone and Modem
Options dialog box.
Monitor
The screen resolution is not correct
•
Change the screen resolution from the Display Settings
dialog box. For more information, see the “Customizing
Windows” chapter in the online User Guide.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
The computer is running but there is no picture
•
Adjust the brightness and contrast controls to the
center position.
The color is not uniform
•
Make sure that the monitor warms up for at least
30 minutes before making a final judgment about color
uniformity.
•
Make sure that:
• Non-shielded speakers are not placed too close to
the monitor.
• The monitor is not positioned too close to another
monitor, electric fan, fluorescent light, metal shelf,
or laser printer.
The text on the display is dim or difficult to read
•
•
Adjust the brightness and contrast controls.
Change the display settings. For more information, see
the “Customizing Windows” chapter in the online User
Guide.
•
Move the computer away from sources of electrical
interference, such as televisions, unshielded speakers,
microwaves, fluorescent lights, and metal beams or
shelves.
For more information about display types, see your monitor
and video card documentation.
Help
For more information about changing the screen resolution, click Start,
then click Help and Support. Type screen resolu tion in the Search Help
box, then press ENTER.
Mouse
The mouse does not work
•
•
•
•
Make sure that the mouse cable is plugged in correctly.
Shut down and restart your computer.
Remove all extension cables and switch boxes.
Try a mouse you know is working to make sure that the
mouse port works.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
The mouse works erratically
•
If the mouse pointer begins moving erratically across
the computer display or becomes difficult to control
precisely, cleaning the mouse will likely improve its
accuracy.
•
Clean the mouse by wiping the bottom with a clean,
damp cloth. Make sure that the optical sensor is clean
and free of debris.
Networks
You cannot connect to your company network
Every network is unique. Contact your company computer
department or network administrator for help. For more
information about setting up a network in your home, see the
“Networking Your Computer” chapter in the online User
Guide.
Help
For more information about network troubleshooting, click Start, then
click Help and Support. Type n etw ork trou blesh ootin g in the Search
Help box, then press ENTER.
Passwords
Your computer does not accept your password
•
Make sure that CAPS LOCK is turned off, then retype the
password.
Power
Your computer will not turn on
•
Make sure that the power cord is connected to an
AC power source and to your computer, and that your
computer is turned on.
•
If your computer is plugged into a surge protector,
make sure that the surge protector is connected
securely to an electrical outlet, turned on, and working
correctly. To test the outlet, plug a working device, such
as a lamp, into the outlet and turn it on.
•
Make sure that the power cord is free from cuts or
damage. Replace any damaged cables.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Printer
The printer will not turn on
•
Make sure that the printer is online. Many printers have
an online/offline button that you may need to press.
•
Make sure that the power cable is plugged into an
AC power source.
The printer is on but will not print
•
Check the cable between the printer and your
computer. Make sure that it is connected to the correct
port.
•
Make sure that the printer is online. Many printers have
an online/offline button that you may need to press so
the printer can start printing. Press the button to put
the printer online.
•
•
Check the cable for bent or broken pins.
If the printer you want to print to is not the default
printer, make sure that you have selected it in the
printer setup.
To set a default printer:
1
Click
(Start), then click Control Panel. The
Control Panel window opens.
2
Click Hardware and Sound, then click the Change
Default Printer option under the Printers
category. The Printer window opens.
3
Right-click the printer you want to be the default
printer, then click Set as Default Printer.
•
Reinstall the printer driver. See the guide that came with
your printer for instructions on installing the printer
driver.
You see a “Printer queue is full” error message
•
Make sure that the printer is not set to work offline.
To make sure that the printer is not set to work offline:
1
Click
(Start), then click Control Panel. The
Control Panel window opens.
2
Click Hardware and Sound, then click the Printers
category. The Printers window opens.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
3
Right-click the printer you want to use. If the menu
shows a check mark next to Use Printer Offline,
click Use Printer Offline to clear the check mark.
•
•
Wait until files have been printed before sending
additional files to the printer.
If you print large files or many files at one time, you
may want to add additional memory to the printer. See
the printer documentation for instructions for adding
additional memory.
You see a “Printer is out of paper” error message
After adding paper, make sure that the printer is online. Most
printers have an online/offline button that you need to press
after adding paper.
Help
click Help and Support. Type p rin ter trou blesh ooter in the Search Help
Sound
You are not getting sound from the speakers
•
Make sure that the volume controls are turned up. For
page 28.
•
•
•
Make sure that mute controls are turned off. For more
information, see “Adjusting the volume” on page 28.
If you are using external speakers, see the speaker
setup poster to check your speaker connections.
Make sure that the universal jacks are configured
correctly. For more information, see “Configuring the
audio jacks” on page 30.
Help
For more information about sound troubleshooting, click Start, then click
Help and Support. Type sou n d trou blesh ooter in the Search Help box,
then press ENTER.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Recovering your system
Most computer problems can be solved by following the
Problem-solving may also involve re-installing some or all of
the computer’s software (also called recovering or restoring
your system). Gateway provides everything you need to
Caution
To prepare your computer for additional system recovery options, you
For instructions, see “Preparing for software and device driver recovery” on
page 90.
•
•
•
pre-installed at the factory, see “Recovering
pre-installed software and drivers” on page 90.
To return your system to a previous condition when it
was working correctly, see “Using Microsoft System
Restore” on page 95.
To completely recover your system to its factory
condition, see “Recovering your system to its factory
condition” on page 98.
system recovery may be to reinstall Windows from the
Windows DVD, then recover your pre-installed software and
device drivers using recovery discs that you created. (Your
options.)
•
To re-install Windows using the Windows DVD, see
“Recovering your system using the Windows DVD” on
page 99.
•
To re-install your pre-installed software and device
drivers using recovery discs, see “Recovering
pre-installed software and drivers using recovery discs”
on page 94.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
Recovering pre-installed software and drivers
You can perform a partial recovery by recovering the software
and device drivers that were pre-installed at the factory. If you
need to recover software that did not come pre-installed on
your system, you need to follow that software’s installation
instructions.
You can recover pre-installed software and drivers from a set
of recovery discs (you must create the discs) or by using
Gateway Recovery Center.
Preparing for software and device driver recovery
You can usually recover your pre-installed software and
drivers from your hard drive. However, if you ever re-install
Windows from the Windows DVD or install a new hard drive,
you will need to recover your pre-installed software and
drivers using a set of software and driver recovery discs.
Because these discs do not come with your computer, you
should create your own set.
Caution
Although you may not be expecting to need recovery discs, we
recommend that you prepare for any eventuality and create a set of recovery
discs while you have the opportunity.
You should create a set of discs for recovering your
pre-installed software and device drivers, in case you will
need to use them later for a complete system recovery. (Your
computer must have a recordable disc drive to perform this
procedure.)
90
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
To create discs for recovering pre-installed software
and drivers:
1
Click
(Start), All Programs, Gateway Recovery
Center, then click Gateway Recovery Center. The
Gateway Recovery Center opens.
2
Click Applications and drivers external media, then
click Next. The What would you like to do? dialog box
opens.
3
4
Click Create system recovery discs, then click Next.
Insert a blank, recordable disc into a recordable disc
drive, then click Next. If an AutoPlay dialog box opens,
click the x in the upper-right corner to close it.
A dialog box opens that tells you the number of blank
discs you will need to create a full set of recovery discs.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
5
If you have enough blank discs of the specified type,
click I have enough discs, then click Next. If you do
not have enough discs, choose a different disc type, or
click Cancel.
The disc recording begins. Label the discs as they are
completed.
Important
Use a permanent marker to label each disc “Software and Driver
Recovery,” along with a short description of which computer the discs
are for. If you are recording multiple discs, as you remove each disc
from the drive, use the marker to label each disc 1 of x, 2 of x, 3 of
x, and so on.
Tip
After a recovery disc is created, your computer names the disc
Recovery13 for disc 1 of a 3-disc set, Recovery23 for disc 2, and
so on.
6
7
If multiple discs are required, insert the additional blank
disks when prompted.
When the process is finished, the Congratulations!
window opens.
8
9
Click Finish.
Remove your final disc, then label all of the discs and
store them in a safe place.
Recovering pre-installed software and drivers using
Gateway Recovery Center
To recover specific drivers and software:
1
Click
Center, then click Gateway Recovery Center. The
Gateway Recovery Center opens.
Important
If you have recently reinstalled Windows or installed a new hard
drive, and your Start menu does not contain Gateway Recovery Center
as an option, you must recover your software and drivers using
software and driver recovery discs you have created. For instructions,
see “Recovering pre-installed software and drivers using recovery discs”
on page 94.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
2
To recover software that was pre-installed, click
Programs, then click Application recovery.
- OR -
To recover device drivers that were pre-installed, click
Hardware, then click Device driver recovery.
3
Click the software or driver you want to recover, then
click Next.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
Recovering pre-installed software and drivers using
recovery discs
If you created a multiple-disc set of recovery discs, each disc
contains a unique set of software and drivers. If a recovery
disc does not offer the software or driver you need to recover,
try another disc.
To recover software and drivers using recovery discs:
1
Insert a software and driver recovery disc into a CD or
DVD drive. If an AutoPlay dialog box appears,
click Run Grc_Vista.exe.
The disc’s Gateway Recovery Center starts.
2
To recover pre-installed software, click Application
recovery, click the software you want to recover, then
click Next.
- OR -
94
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
To recover pre-installed device drivers, click Device
driver recovery, click the type of driver you want to
recover, then click Next.
3
If the software or driver is not shown on the list, and
you have a multiple-disc set of recovery discs, close
Gateway Recovery Center and try another disc.
Using Microsoft System Restore
Microsoft System Restore periodically takes “snapshots” of
your system settings and saves them as restore points. In
most cases of hard-to-resolve software problems, you can
return to one of these restore points to get your system
running again.
Windows automatically creates an additional restore point
each day and each time you install software or device drivers.
You can also create a restore point manually. For instructions,
see “Manually creating a restore point” on page 97.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
To restore using Microsoft System Restore:
1
Click
(Start), Control Panel, System and
Maintenance, then click Backup and Restore Center.
The Backup and Restore Center opens.
2
On the left side of the window, click Repair Windows
using System Restore, then click Next. The Choose a
restore point dialog box opens.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
3
4
Click the restore point you want, click Next, then click
Finish. A confirmation message box appears.
Click Yes. Your system is restored using the restore
point you specified.
Manually creating a restore point
To manually create a restore point:
1
Click
(Start), Control Panel, System and
Maintenance, then click Backup and Restore Center.
The Backup and Restore Center opens.
2
On the left side of the window, click Create a restore
point or change settings, then click Next. The System
Properties dialog box opens to the System Protection
tab.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
3
Click Create. The Create a restore point dialog box
opens.
4
5
Type a description for the restore point (such as the date
and time), then click Create. The restore point is
created.
Click OK.
Recovering your system to its factory
condition
If your computer’s problems are not solved by any of the
other recovery options, you may need to recover its hard drive
to its factory condition. This process is called a factory
recovery.
Caution
A complete factory recovery deletes everything on your hard drive, then
reinstalls Windows and any pre-installed software and device drivers. If you are
able to access important files on your hard drive, back them up now.
To delete everything on your hard drive and re-install all
factory software:
1
If you can still run Windows:
a
Click
(Start), All Programs, Gateway Recovery
Center, then click Gateway Recovery Center. The
Gateway Recovery Center opens.
b
Click Recovery, then click Next. Your computer
restarts.
- OR -
If you cannot run Windows:
c
Turn on or restart your computer.
d
While the computer is starting up, repeatedly press
F8 until the Recovery Options screen opens. If
Windows loads instead, restart the computer and try
again.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
2
Press the arrow keys on your keyboard to select Repair
Your Computer, then press ENTER.
Gateway System Recovery starts, and the System
Recovery Options dialog box opens.
3
4
Select a language and keyboard layout, then click Next.
Click the User name box to select a Windows user
account, click in the Password box and type the user
account’s password (if any), then click Next. The System
Recovery Options menu opens.
5
6
Click Restore Application. The Welcome to Gateway
System Recovery window opens.
Click Next, click Full factory recovery, then click Next.
Caution
Continuing with the full factory recovery will delete everything
on your hard drive. If your computer has multiple hard drives, recovery
will delete everything on only the primary (operating system) hard drive.
If your computer’s hard drive has multiple partitions, recovery will
delete everything on only the operating system partition.
7
8
Click Yes, then click Next. The Factory image recovery
window opens, which shows you the progress of the
system recovery.
When recovery is finished, the Recovery is complete
window opens.
Click Finish, then click Restart. Your computer restarts
into its original factory condition.
Recovering your system using the
Windows DVD
If you install a new hard drive or completely re-format your
original hard drive, you must recover your system using the
Windows Vista operating system DVD. You will also need to
recover your computer’s pre-installed software and device
drivers.
To completely re-install Windows:
1
Insert the Windows DVD into one of your computer’s
DVD-capable drives, then restart your computer.
2
When the prompt “Press any key to boot from CD
or DVD” appears, press any key on your keyboard. A list
of valid boot devices appears.
3
Press the arrow keys to select the drive containing the
Windows DVD, then press ENTER and follow the
on-screen instructions.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
4
After Windows is completely re-installed, use your
software and driver recovery discs to recover your
computer’s pre-installed software and device drivers.
For instructions, see “Recovering pre-installed software
and drivers using recovery discs” on page 94.
Telephone support
Before calling Gateway Customer Care
If you have a technical problem with your computer, follow
these recommendations before contacting Gateway Customer
Care:
•
•
•
Make sure that your computer is connected correctly to
a grounded AC outlet that is supplying power. If you use
a surge protector, make sure that it is turned on.
If a peripheral device, such as a keyboard or mouse,
does not appear to work, make sure that all cables are
plugged in securely.
If you have recently installed hardware or software,
make sure that you have installed it according to the
instructions provided with it. If you did not purchase the
hardware or software from Gateway, see the
manufacturer’s documentation and technical support
resources.
•
•
If you have “how to” questions about using a program,
see:
• Online Help
• Printed documentation
• The Microsoft Windows documentation
• The software publisher’s Web site
See the troubleshooting section of this chapter.
Warning
To avoid bodily injury, do not attempt to troubleshoot your
computer problem if:
- Power cords or plugs are damaged
- Liquid has been spilled into your computer
- Your computer was dropped
- The case was damaged
Instead, unplug your computer and contact a qualified computer
technician.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
•
•
Have your customer ID, serial number, and order
number available, along with a detailed description of
your problem, including the exact text of any error
messages, and the steps you have taken.
Make sure that your computer is nearby at the time of
your call. The technician may have you follow
troubleshooting steps.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
Telephone numbers
Gateway offers a wide range of customer service, Customer
Care, and information services.
Automated troubleshooting system
Service description
How to reach
Use an automated menu system and your telephone
keypad to find answers to common problems.
800-846-2118
(US and Canada)
Telephone numbers
You can access the following services through your telephone
to get answers to your questions:
Resource
Service description
Answers by
Gateway
Get tutorial assistance for
hardware and software issues.
www.gateway.com/answers
Gateway
Customer
Care
Talk to a Gateway Customer
Care representative about a
non-tutorial technical support
question.
(See “Before calling Gateway
Customer Care” on page 100
before calling)
Gateway Customer Care
telephone numbers vary by
country or region. See the
label on the front or side of
your computer.
605-232-2191
TDD Customer Care (for hearing
impaired) is available:
Weekdays 8:00 a.m. - 10:00 p.m.
Pacific Time
Weekends 8:00 a.m. - 7:00 p.m.
Pacific Time
Sales,
Get information about available
systems, pricing, orders, billing
statements, warranty service, or
other non-technical issues.
800-846-2000 (US)
888-387-7752 (Canada)
accounting,
and
warranty
102
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Self-help
If you have how-to questions about using your
Gateway-supplied hardware or software, see the following
resources:
•
The printed or online documentation that came with
your hardware or software. In many cases, additional
product information and online documentation for
Gateway-supplied hardware can be found in our Web
site's Documentation Library.
•
•
This Reference Guide and the online User Guide.
The software publisher’s Web site.
Help
For more how-to information about Windows, click Start, then click Help
and Support. Type p ractice in the Search Help box, then press ENTER.
Tutoring
Answers by GatewaySM is a telephone service that provides
answers to all of your “How do I...” questions on Gateway
computers. For more information, go to
www.gateway.com/answers.
Training
Gateway provides the following computer-based training:
Resource
Service description
For more information
Gateway
Learning
Libraries
A variety of courses and
tutorials are available on CD.
Select from several
www.gateway.com/training
easy-to-use learning libraries.
Online
More than 450 online courses
www.learnwithgateway.com
Trainingfrom are available from
Learn With
Gateway
Learn With Gateway. All you
have to do is go online and log
in. You select the subject
matter, and the learning
format (self-paced tutorials or
virtual classrooms), all from
the comfort of your computer.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
CHAPTER 6: Troubleshooting
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Legal Notices
Important safety information
Warning
Always follow these instructions to help guard against personal injury
and damage to your Gateway system.
Your Gateway system is designed and tested to meet the latest standards for safety of
information technology equipment. However, to ensure safe use of this product, it is important
that the safety instructions marked on the product and in the documentation are followed.
Setting up your system
•
Read and follow all instructions marked on the product and in the documentation
before you operate your system. Retain all safety and operating instructions for future
use.
•
•
•
Do not use this product near water or a heat source such as a radiator.
Set up the system on a stable work surface.
The product should be operated only from the type of power source indicated on the
rating label.
•
If your computer has a voltage selector switch, make sure that the switch is in the
proper position for your area. The voltage selector switch is set at the factory to the
correct voltage.
•
Openings in the computer case are provided for ventilation. Do not block or cover these
openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the
system for ventilation when you set up your work area. Never insert objects of any
kind into the computer ventilation openings.
•
Some products are equipped with a three-wire power cord to make sure that the
product is properly grounded when in use. The plug on this cord will fit only into a
grounding-type outlet. This is a safety feature. If you are unable to insert the plug into
an outlet, contact an electrician to install the appropriate outlet.
•
•
If you use an extension cord with this system, make sure that the total ampere rating
on the products plugged into the extension cord does not exceed the extension cord
ampere rating.
If your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure
that the antenna or cable system is electrically grounded to provide some protection
against voltage surges and buildup of static charges.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Care during use
Warning
Do not use Gateway products in areas classified as hazardous locations.
Such areas include patient care areas of medical and dental facilities,
oxygen-laden environments, or industrial facilities.
Warning
To reduce the risk of fire, use only No. 26 AWG or larger
telecommunications line cord.
•
•
Do not walk on the power cord or allow anything to rest on it.
Do not spill anything on the system. The best way to avoid spills is to avoid eating
and drinking near your system.
•
Some products have a replaceable CMOS battery on the system board. There is a danger
of explosion if the CMOS battery is replaced incorrectly. Replace the battery with the
same or equivalent type recommended by the manufacturer. Dispose of batteries
according to the manufacturer’s instructions.
•
When the computer is turned off, a small amount of electrical current still flows through
the computer. To avoid electrical shock, always unplug all power cables and modem
cables from the wall outlets before cleaning the system.
•
•
•
•
•
•
Unplug the system from the wall outlet and refer servicing to qualified personnel if:
The power cord or plug is damaged.
Liquid has been spilled into the system.
The system does not operate properly when the operating instructions are followed.
The system was dropped or the cabinet is damaged.
The system performance changes.
Replacement parts and accessories
Use only replacement parts and accessories recommended by Gateway.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Legal Notices
Regulatory compliance
statements
United States of America
Federal Communications Commission (FCC)
Unintentional emitter per FCC Part 15
This device has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television reception. However, there is
no guarantee that interference will not occur in a particular installation. If this equipment does
cause interference to radio and television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
•
•
•
•
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment to an outlet on a different circuit from that to which the receiver
is connected
Consult the dealer or an experienced radio/TV technician for help.
Compliance Accessories: The accessories associated with this equipment are: shielded
video cable when an external monitor is connected. These accessories are required to be used
in order to ensure compliance with FCC rules.
FCC declaration of conformity
Responsible party:
Gateway, Inc.
7565 Irvine Center Drive
Irvine, CA 92618
Phone: 800-846-2000
Caution
Changes or modifications not expressly approved by Gateway could void
the FCC compliance and negate your authority to operate the product.
This device complies with Part 15 of the FCC Rules. Operation of this device is subject to the
following two conditions: (1)this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
California Proposition 65 Warning
Warning
This product contains chemicals, including lead, known to the State of
California to cause cancer, birth defects or reproductive harm.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Telecommunications per Part 68 of the Code of
Federal Regulations (CFR 47) (applicable to products
fitted with USA modems)
Your modem complies with Part 68 of the Code of Federal Regulations (CFR 47) rules. On the
computer or modem card is a label that contains the FCC registration number and Ringer
Equivalence Number (REN) for this device. If requested, this information must be provided to
the telephone company.
A telephone line cord with a modular plug is required for use with this device. The modem is
designed to be connected to the telephone network or premises wiring using a compatible
modular jack which is Part 68-compliant. See installation instructions for details.
The Ringer Equivalence Number (REN) is used to determine the number of devices which may
be connected to the telephone line. Excessive RENs on a telephone line may result in the devices
not ringing in response to an incoming call. In most areas, the sum of RENs should not exceed
five (5.0). To be certain of the number of devices that may be connected to a line, as determined
by the total RENs, contact the local telephone company.
If this device causes harm to the telephone network, the telephone company will notify you in
advance that temporary discontinuance of service may be required. The telephone company may
request that you disconnect the equipment until the problem is resolved.
The telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the operation of this equipment. If this happens, the telephone company will
provide advance notice in order for you to make necessary modifications to maintain
uninterrupted service.
This equipment cannot be used on telephone company-provided coin service. Connection to
party line service is subject to state tariffs. Contact the state public utility commission or public
service commission for information.
When programming or making test calls to emergency numbers:
•
Remain on the line and briefly explain to the dispatcher the reason for the call.
Perform such activities in the off-peak hours such as early morning or late evenings.
•
The United States Telephone Consumer Protection Act of 1991 makes it unlawful for any person
to use a computer or other electronic device to send any message via a telephone fax machine
unless such message clearly contains, in a margin at the top or bottom of each transmitted page
or on the first page of the transmission, the date and time it is sent, an identification of the
business, other entity, or other individual sending the message, and the telephone number of
the sending machine or such business, other entity, or individual. Refer to your fax
communication software documentation for details on how to comply with the fax-branding
requirement.
Canada
Industry Canada (IC) Unintentional emitter per
ICES-003
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital
apparatus as set out in the radio interference regulations of Industry Canada.
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de Classe B prescrites dans le règlement sur le brouillage
radioélectrique édicté par Industrie Canada.
Telecommunications per Industry Canada CS-03 (for
products fitted with an IC-compliant modem)
The Industry Canada label identifies certified equipment. This certification means that the
equipment meets certain telecommunications network protective, operation, and safety
requirements. The Department does not guarantee the equipment will operate to the users’
satisfaction.
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Legal Notices
Before installing this equipment, users should make sure that it is permissible to be connected
to the facilities of the local telecommunications company. The equipment must also be installed
using an acceptable method of connection. In some cases, the inside wiring associated with a
single-line individual service may be extended by means of a certified connector assembly. The
customer should be aware that compliance with the above conditions may not prevent
degradation of service in some situations.
Repairs to certified equipment should be made by an authorized Canadian maintenance facility
designated by the supplier. Any repairs or alterations made by the user to this equipment, or
equipment malfunctions, may give the telecommunications company cause to request the user
to disconnect the equipment.
Warning
To avoid electrical shock or equipment malfunction do not attempt to
make electrical ground connections by yourself. Contact the appropriate
inspection authority or an electrician, as appropriate.
Users should make sure, for their own protection, that the electrical ground connections of the
power utility, telephone lines, and internal metallic water pipe system, if present, are connected
together. This precaution may be particularly important in rural areas.
The Ringer Equivalence Number (REN) assigned to each terminal device provides an
indication of the maximum number of terminals allowed to be connected to a telephone
interface. The termination on an interface may consist of any combination of devices subject
only to the requirement that the sum of the Ringer Equivalence Numbers of all the devices does
not exceed 5.
Laser safety statement
Warning
Use of controls or adjustments or performance of procedures other than
those specified in this manual may result in hazardous radiation exposure. To
prevent exposure to laser beams, do not try to open the enclosure of a CD or
DVD drive.
All Gateway systems equipped with CD and DVD drives comply with the appropriate safety
standards, including IEC 825. The laser devices in these components are classified as “Class 1
Laser Products” under a US Department of Health and Human Services (DHHS) Radiation
Performance Standard. Should the unit ever need servicing, contact an authorized service
location.
Television antenna connectors protection (for
systems fitted with TV/cable TV tuner cards)
External television antenna grounding
Important
The instructions are for the person who installs cable to the system.
Gateway assumes you are qualified in the servicing of computer equipment and
trained in recognizing hazards in products with electric shock.
If an outside antenna or cable system is to be connected to your Gateway PC, make sure that
the antenna or cable system is electrically grounded to provide some protection against voltage
surges and static charges.
Article 810 of the National Electrical Code, ANSI/NFPSA 70, provides information with regard to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location of antenna discharge unit,
connection to grounding electrodes, and requirements for the grounding electrode.
Cable distribution system should be grounded (earthed) in accordance with ANSI/NFPA 70, the
National Electrical Code (NEC), in particular Section 820.93, Grounding of Outer Conductive Shield
of a Coaxial Cable.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Lightning protection
For added protection of any Gateway product during a lightning storm or when it is left
unattended or unused for long periods of time, unplug the product from the wall outlet and
disconnect the antenna or cable system.
Power lines
Warning
When installing or realigning an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits. Contact
with them could be fatal.
Do not locate the antenna near overhead light or power circuits, or where it could fall into such
power lines or circuits.
7
6
5
4
3
1
2
Antenna and satellite grounding
Reference
Grounding component
1
2
Electric service equipment
Power service grounding electrode system
(NEC Art 250, Part H)
3
4
5
6
7
Ground clamps
Grounding conductors (NEC Section 810-21)
Antenna discharge unit (NEC Section 810-20)
Ground clamp
Antenna lead-in wire
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Legal Notices
Environmental information
The product you have purchased contains extracted natural resources that have been used in
the manufacturing process. This product may contain substances known to be hazardous to
the environment or to human health.
To prevent releases of harmful substances into the environment and to maximize the use of our
natural resources, Gateway provides the following information on how you can responsibly
recycle or reuse most of the materials in your “end of life” product.
Waste Electrical and Electronic Equipment (commonly known as WEEE) should never
be disposed of in the municipal waste stream (residential garbage collection). The
“Crossed-Out Waste Bin” label affixed to this product is your reminder to dispose
of your “end of life” product properly.
Substances such as glass, plastics, and certain chemical compounds are highly
recoverable, recyclable, and reusable. You can do your part for the environment
by following these simple steps:
•
•
When your electrical or electronic equipment is no longer useful to you, “take it back”
to your local or regional waste collection administration for recycling.
In some cases, your “end of life” product may be “traded in” for credit towards the
purchase of new Gateway equipment. Call Gateway to see if this program is available
in your area.
•
If you need further assistance in recycling, reusing, or trading in your “end of life”
product, you may contact us at the Customer Care number listed in your product’s
user guide and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by understanding
and using the energy-saving features of this product (where applicable), recycling the inner and
outer packaging (including shipping containers) this product was delivered in, and by disposing
of or recycling used batteries properly.
With your help, we can reduce the amount of natural resources needed to produce electrical
and electronic equipment, minimize the use of landfills for the disposal of “end of life” products,
and generally improve our quality of life by ensuring that potentially hazardous substances are
not released into the environment and are disposed of properly.
Notices
Copyright © 2007 Gateway, Inc.
All Rights Reserved
7565 Irvine Center Drive
Irvine, CA 92618 USA
All Rights Reserved
This publication is protected by copyright and all rights are reserved. No part of it may be
reproduced or transmitted by any means or in any form, without prior consent in writing from
Gateway.
The information in this manual has been carefully checked and is believed to be accurate.
However, changes are made periodically. These changes are incorporated in newer publication
editions. Gateway may improve and/or change products described in this publication at any time.
Due to continuing system improvements, Gateway is not responsible for inaccurate information
which may appear in this manual. For the latest product updates, consult the Gateway Web site
at www.gateway.com. In no event will Gateway be liable for direct, indirect, special,
exemplary, incidental, or consequential damages resulting from any defect or omission in this
manual, even if advised of the possibility of such damages.
In the interest of continued product development, Gateway reserves the right to make
improvements in this manual and the products it describes at any time, without notices or
obligation.
112
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Trademark acknowledgments
Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of
Gateway, Inc. in the U.S. and other countries. Intel, Intel Inside logo, and Pentium are registered
trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows
are trademarks or registered trademarks of Microsoft Corporation. All other product names
mentioned herein are used for identification purposes only, and may be the trademarks or
registered trademarks of their respective companies.
Macrovision statement
If your computer has a DVD-compatible drive and an analog
TV Out port, the following paragraph applies:
This product incorporates copyright protection technology that is protected by method claims
of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation
and other rights owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation, and is intended for home and other limited viewing uses only unless
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is
prohibited.
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A: Legal Notices
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
cards
A
AC power connector
accessories
8
replacing expansion 47
safety precautions 107
activity indicators
See indicators
application buttons 25
application key 24, 25
arrow keys 24, 25
case
CD
audio
audio in jack 14
center speaker jack 13
configuring jacks 30
front speaker jack 13
headphone jack 13
line in jack 14
CD drive
adding 42
locating drive
replacing 42
line out jack 13
3
microphone jack 10, 12
muting 28
cleaning
audio CD 59
case 58
rear speaker jack 14
side speaker jack 14
subwoofer jack 13
CD 59
DVD 59
audio CD
cleaning 59
LCD panel 58
audio in jack 14
audio playback buttons 23, 25
notebook exterior 57
screen 58
B
clicking 27
closing
backing up files 65
battery
replacing 50
configuring
broadband connection
connecting 13
speakers 30
buttons
connecting
See keys and buttons
modem 19
PS/2 keyboard 12
PS/2 mouse 12
C
cable modem 19
connecting 13
to Ethernet network 13, 19
to Internet 13
to network 13, 19
Caps Lock indicator 24, 25
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
connections
audio in 14
center speaker 13
digital camera 10, 12, 31
digital video camera 12, 13,
31
Ethernet 13, 19
external audio 13, 14
external speakers 13
Firewire 12, 13, 31
front speaker 13
headphone 13
i.Link 12, 13
diskette
IEEE 1394 12, 13
keyboard 10, 12
line in 13, 14
display
line out 13
documentation
microphone 10, 12
modem 13, 19
Using Your Computer
2
mouse 10, 12
network 13, 19
parallel 12
power
8
power cord
8
printer 10, 12
PS/2 keyboard 12
PS/2 mouse 12
rear speakers 14
scanner 10, 12
serial 12
recordable CD
7
7
side speaker 14
subwoofer 13
universal 30, 88
USB 10, 12
video camera 12, 13
Zip drive 10, 12
DSL modem 19
connecting 13
DVD
cleaning 59
Customer Service
Accounting 102
Sales 102
DVD drive
adding 42
Warranty 102
locating drive
replacing 42
7
D
troubleshooting 73, 76
default printer 87
defragmenting hard drive 64
deleting files and folders 62
E
editing buttons 23, 25
electrostatic discharge (ESD) 34
digital camera
locating USB port 10, 12
116
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
ergonomics 16
Error-checking 63
Ethernet jack 13
Ethernet network
connecting 19
jack 19
I
i.Link port 12, 13
expansion card
indicators
adding 47
replacing 47
external audio jack 13, 14
power
F
installing
faxes
troubleshooting 83
files
devices 31
backing up 65
deleting 62
opening 27
searching for 68
transferring 68
troubleshooting 77
types 68
peripheral devices 31
system battery 50
finding
Internet
files and folders 68
buttons 23
Firewire port 12, 13, 31
troubleshooting 79, 83
folders
opening 27
J
fragmentation 64
function keys 23, 25
G
K
Gateway contact information
3
keyboard
buttons 23
H
features 23
troubleshooting 80
USB port 10, 12
hard drive
adding 45
backing up files 65
checking for errors 63
checking for free space 61
defragmenting 64
keys and buttons
application 24, 25
arrow 24, 25
deleting files and folders 62
replacing 45
audio playback 23, 25
directional 24, 25
editing 23, 25
scanning for errors 63
troubleshooting 78
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
function 23, 25
Internet 23
Microsoft Certificate of
Authenticity
3
mouse 26
modem
navigation 23, 25
numeric 24, 25
sleep 25
cable 19
DSL 19
Windows 24, 25
L
monitor
troubleshooting 84
label
Microsoft Certificate of
Authenticity
3
3
product
LCD panel
cleaning 58
troubleshooting 76, 84
cleaning 59
clicking 27
double-clicking 27
moving pointer 26, 27
programs 27
lights
See indicators
line in jack 13, 14
line out jack 13
right-clicking 27
M
selecting screen objects 27
maintenance
checking for drive errors 63
checking hard drive space
61
moving
cleaning 57, 59
cleaning computer display
58
68
pointer 27
settings from old computer
cleaning computer screen
58
cleaning mouse 59
defragmenting 64
deleting files 62
suggested schedule 56
using Scheduled Task
Wizard 66
multimedia
muting sound 28
N
navigation keys 23, 25
memory
network
adding 38
jack 19
installing 38
replacing 38
troubleshooting 76, 86
network jack 13
memory card reader
replacing 44
non-technical support
Accounting 102
Sales 102
microphone jack 10, 12
118
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
Warranty 102
numeric keypad 24, 25
indicator 24, 25
R
O
RAM
opening
computer case 35
files 27
folders 27
7
programs 27
shortcut menu 27
P
Pad Lock indicator 24, 25
parallel port 12
password 86
S
peripheral devices 31
safety
Plug and Play devices
IEEE 1394 support for 31
USB support for 31
avoiding repetitive strain
guidelines for
pointer 26
moving 27
ports
See connections
power
button
7
connector
Hibernate mode
indicator
source problems 18
8
7
scanner
7
Standby/Resume
7
screen
troubleshooting 86
turning off computer 21
turning on computer 20
getting information 27
moving 27
power button
printer
7
default 87
installing 31
parallel port 12
troubleshooting 87
USB port 10, 12
Scroll Lock indicator 24, 25
scroll wheel 27
searching
for files and folders 68
serial port 12
programs
setting up
closing unresponsive 22
opening 27
safety precautions 106
shortcut menus
PS/2 port
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
accessing 27
shortcuts
opening menu 27
67
troubleshooting
shutting down computer 21, 22
side panel
removing 35
replacing 35
CD drive 73
sleep button 25
sound
DVD drive 73, 76
adjusting 28
controls 28
muting 28
speaker jack 13
hard drive 78
speakers
configuring 30
keyboard 80
Standby mode
starting
7
memory card reader 81
modem 81
computer 7, 20
programs 27
static electricity 34
surge protector 18
monitor 84
mouse 85
system battery
network 86
replacing 50
system board
replacing 51
printer 87
T
screen resolution 84
Web site connection speed
technical support
automated
troubleshooting
102
tips before contacting 100
tutorial service 102
turning on computer 7, 20
telephone support 100
training
CD 103
classroom 103
Gateway Learning Libraries
103
U
uninterruptible power supply
(UPS) 18
Learn With Gateway 103
transferring
updating
files from old computer 67,
Windows 59
68
UPS 18
120
Download from Www.Somanuals.com. All Manuals Search And Download.
www.gateway.com
USB port 10, 12, 31
V
volume
adjusting 28
adjusting modem 84
controls 28
muting 28
troubleshooting 88
W
Windows key 24, 25
Windows Product Key Code
Windows Update 59
3
wired Ethernet
troubleshooting 76
working safely 16
Z
Zip drive 65
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
122
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
MAN PFL6 HW REF V R0 1/07
Download from Www.Somanuals.com. All Manuals Search And Download.
|