®
GPSMAP 76Cx
mapping gps
owner’s manual
GPSMAP 76Cx shown with optional MapSource® data.
Download from Www.Somanuals.com. All Manuals Search And Download.
IntroductIon
Product Registration
IntroductIon
Help us better support you by completing our online
registration today! Connect to our Web site at
http://my.garmin.com. Keep the original sales receipt,
or a photocopy, in a safe place.
Thank you for choosing the Garmin GPSMAP 76Cx.
Both use the proven performance of Garmin GPS
and full-featured mapping to create an unsurpassed
portable GPS receiver. Take a moment to compare the
contents of this package with the packing list on the
box. If any pieces are missing, contact your Garmin
dealer.
Contact Garmin
Contact Garmin if you have any questions while
using your unit. Contact Garmin Product Support by
phone: (913) 397-8200 or (800) 800-1020, Monday–
Friday, 8 AM–5 PM Central Time; or go to
Tips and Shortcuts
•
To quickly return to the Main Menu from any
page, press the MENU key twice.
In Europe, contact Garmin (Europe) Ltd. at +44 (0)
870.8501242 (outside the UK) or 0808 2380000
(within the UK).
•
To extend battery life, turn off the GPS when
not using the GPSMAP 76Cx for navigation.
Decrease the level of the display’s backlight by
quickly pressing and releasing the POWER
key.
Optional �ccessories
For a complete list of available accessories and maps
for use with the GPSMAP 76 Cx refer to
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢀ
IntroductIon
table of contents
ꢀꢀ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
IntroductIon
Operating the GPSM�P 76Cx
Understanding Terms
Select—move the highlighted area on the screen up,
down, left, or right with the ROCKER key to select
individual fields.
Hꢀghlꢀghted
field
Fꢀeld
Key—when you are directed to press a key, press and
quickly release the key.
Field—the location on a page where data or an option
can be shown or entered.
On-screen buttons
On-screen button—use the ROCKER key to select a
button, and press ENTER.
Manual Conventions
In this manual, when you are instructed to select
an item, small arrows (>) appear in the text. They
indicate that you should highlight a series of items on
the screen using the ROCKER, and press ENTER
after each item. For example, if you see “select
Service > Show Info,” you should highlight Service,
and press ENTER. Then highlight Show Info, and
press ENTER again.
Scroll bar—when viewing a list of items too long to
appear on the screen, a scroll bar appears next to the
list. To scroll through a list, press up or down on the
ROCKER, or use the In and Out keys.
Default—the factory setting saved in the unit’s
memory. You can change the settings, and revert to
the factory settings when you select Restore Defaults.
GPSMAP 76Cx Owner’s Manual
ꢀꢀꢀ
Download from Www.Somanuals.com. All Manuals Search And Download.
IntroductIon
Warnings
Failure to avoid the following potentially hazardous
situations could result in an accident or collision
resulting in death or serious injury.
•
•
Use the electronic chart in the unit only to facilitate,
not to replace, the use of authorized government charts.
Official government charts and notices to mariners
contain all information needed to navigate safely.
•
When navigating, carefully compare information
displayed on the unit to all available navigation sources,
including information from visual sightings, and maps.
For safety, always resolve any discrepancies or questions
before continuing navigation.
Use this unit only as a navigational aid. Do not attempt
to use the unit for any purpose requiring precise
measurement of direction, distance, location, or
topography.
WARNING: This product, its packaging, and its components contain chemicals known to the State of California to cause cancer,
birth defects, or reproductive harm. This Notice is provided in accordance with California’s Proposition 65.
The California Electronic Waste Recycling Act of 2003 requires the recycling of certain electronics. For more information on
Important Information
MAP DATA INFORMATION: One of the goals of Garmin is to provide customers with the most complete and accurate
cartography that is available to us at a reasonable cost. We use a combination of governmental and private data sources, which we
identify in product literature and copyright messages displayed to the consumer. Virtually all data sources contain some inaccurate
or incomplete data. In some countries, complete and accurate map information is either not available or is prohibitively expensive.
ꢀv
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG Started
GettInG started
Unit Overview
�uxiliary GPS
�ntenna Connector
Internal
antenna
Battery compartment
cover
Interface keys
Battery compartment
locking D-ring
External Data/
�uxiliary Power Port
USB connector port
Carry lanyard
attachment slots
GPSMAP 76Cx Owner’s Manual
ꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG Started
To install the microSD card:
1. Remove the battery cover by turning the D-ring
1/4 turn counter-clockwise and pulling the cover
loose.
Batteries, microSD Card, and Lanyard
The GPSMAP 76Cx operates on two AA batteries
(not included), which are located in the back of
the unit. You can use Alkaline, NiMH, or Lithium
battery type.
2. Locate the microSD card in the slot below the
batteries and press down on the top edge of the
card until you feel it click. Then gently allow the
card to release.
To install the batteries:
1. Remove the battery cover
by turning the D-ring 1/4
turn counter-clockwise and
pulling the cover loose.
3. Press down again to install
the card, making certain
the card is fully in place
to prevent damage when
reinstalling the battery
cover.
2. Insert the batteries,
observing the proper
polarity.
To install the lanyard:
1. Place the loop of the
lanyard throught the slot at
the base of the unit.
3. Reinstall the battery cover.
Remove the batteries from your
unit when you do not expect to
use the unit for several months.
Stored data is not lost when
batteries are removed.
2. Route the strap through
the loop, and pull tight.
mꢀcroSD card slot
(wꢀth mꢀcroSD card ꢀn
posꢀtꢀon for ꢀnsertꢀon)
Install the carry lanyard
ꢀn the slot at the bottom
of the unꢀt
ꢂ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG Started
Using the GPSM�P 76Cx Keypad
IN/OUT Zoom Keys
ROCKER Key
Press to zoom in or out on the Map
page.
Press up, down, left, or right to highlight
options and to enter data, or move the map
panning arrow.
Press to scroll up or down a list on
any other page.
PAGE Key
FIND/MOB Key
Press to cycle through the main pages.
Press at any time to view the Find
Menu.
MENU Key
Press and hold for MOB.
Press to view page options.
POWER Key
Press twice to view the Main Menu.
Press and hold to turn the unit on
or off.
ENTER/MARK Key
Press and Release to adjust the
backlighting.
Press and release to enter highlighted
options, data or confirm on-screen
messages.
QUIT Key
Press and hold at any time to mark your
current location as a waypoint.
Press to cancel data entry or exit a
page.
GPSMAP 76Cx Owner’s Manual
ꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG Started
To initialize your GPSM�P 76Cx:
Turning on the GPSM�P 76Cx
Hold the unit in front of you facing the sky and
observe the Satellite page. While the GPS receiver
is searching for the satellite signals, a “Locating
Satellites” message is replaced by an “Acquiring
Satellites” message until a location fix is made.
To turn the GPSM�P 76Cx on and off:
Press and hold the POWER.
Adjusting the Backlight
To adjust the backlight level:
1. Press and quickly release the POWER key.
The outer
cꢀrcle
represents
2. Press up on the ROCKER to increase the
brightness, or press down to decrease.
Headꢀng bug
ꢀndꢀcates your
The ꢀnner
dꢀrectꢀon
the horꢀzon.
3. Press ENTER or QUIT to close.
colors and backlight time out and brightness levels.
cꢀrcle ꢀs ꢄ5
degrees from
The Strength of
the horꢀzon.
each satellꢀte
sꢀgnal.
Initializing the GPS Receiver
The first time you turn on your unit, the GPS receiver
must collect satellite data and establish its current
location. To receive satellite signals, you should be
outdoors and have a clear view of the sky.
Initialization Options
If the unit cannot get a satellite fix, an options
menu with a list of solutions appears. Highlight the
appropriate solution and press ENTER.
ꢄ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG Started
Using the Status Bar
At the top of each page, the status bar provides status
information for several unit features.
On-Screen Messages
When a significant event in the operation of the unit
occurs, an on-screen message appears to advise you of
the occurrence. In each case the condition is described
and often a remedy provided. Press ENTER to
acknowledge the message and close the window.
Status Bar
The Battery Power icon (
battery power. The Auxiliary Power icon (
Cable Connection icon ( ) appears when the unit
) shows the remaining
) or
is plugged in to an external or USB power source.
Satellite signal status is shown when searching for or
On-Screen Messages
acquiring satellites (
), when a 2D fix (
) is attained.
) is
attained and when a 3D fix (
The Backlight icon ( ) appears when the backlight
is on. The Backlight is off when you turn the unit on.
The Backlight uses a significant amount of battery
power.
GPSMAP 76Cx Owner’s Manual
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GettInG Started
Using the Databases
Optional MapSource CD-ROMs enhance the
versatility of your GPSMAP 76Cx. This data is
loaded to the microSD Card already installed in the
unit. With optional MapSource City Navigator data,
you can view listings of nearby restaurants, lodging,
shopping centers, attractions and entertainment, and
even retrieve addresses and phone numbers for any
listed location.
mꢀcroSD card slot
located ꢀn battery
compartment
USB ꢀnterface
cable connectꢀon
under opened
battery cover
The included USB Interface Cable or an optional PC
interface cable (with a serial connector) can be used
to transfer MapSource CD-ROM data to the microSD
card. Higher capacity and pre-loaded microSD map
data cards are also available.
Map data transfer requires the USB Interface Cable
provided with the unit to transfer MapSource data
from a PC to the microSD card when installed in the
GPSMAP 76Cx. Use the USB Mass Storage feature
to transfer other files to the microSD as explained on
compatible MapSource products.
6
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
To mark your current location:
basIc operatIon
1. Press and hold the ENTER/M�RK key until the
Mark Waypoint page appears. A default three-
digit name and symbol are assigned to the new
waypoint.
This section explains some of the more common
operations you can perform with your GPSMAP 76Cx
including using the Find Menu, creating and using
waypoints, tracks, and routes.
Waypoꢀnt
Waypoꢀnt
symbol
name
Creating and Using Waypoints
Waypoints are locations or landmarks you record
and store in your GPS. You can add waypoints to
routes and even create a Go To directly to the selected
waypoint.
You can create waypoints using three methods. Press
the ENTER/MARK key while at a location, create a
waypoint on the Map page, or enter coordinates for a
waypoint manually.
Mark Waypoint Page
2. To accept the waypoint with the default
information, highlight OK.
Marking Your Current Location
Use the ENTER/MARK key to quickly capture your
current location creating a new waypoint. You must
have a valid position (2D or 3D) fix to mark your
current location.
OR
To change any information, select the
appropriate field, and press ENTER to open
the on-screen keypad. After entering and
confirming your changes, select OK.
GPSMAP 76Cx Owner’s Manual
7
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
To delete a waypoint:
Creating Waypoints Using the Map
From the Waypoints page, select the waypoint
you want to delete > Delete.
To create a waypoint using the Map page:
1. On the Map page, use the ROCKER to move
the pointer to the map item you want to mark.
NOTE: When you delete a waypoint, you cannot
recover it from the unit.
2. Press and quickly release ENTER/M�RK
to capture the pointer location and open the
information page for the map item.
To move a waypoint on the Map page:
1. Press FIND > Waypoints.
3. Select Save. If there is no information for that
point, a “No map information at this point. Do
you want to create a user waypoint here?”
prompt appears. Select Yes.
2. Select the waypoint you want to move, and
press ENTER.
3. Select Map to show the waypoint on the map.
4. Press ENTER again to place a MOVE marker
Editing Waypoints
You can edit waypoints to change the symbol, name,
note, location, elevation, and depth.
next to the waypoint.
5. Use the ROCKER to move the waypoint to a
new location, and press ENTER.
To edit a waypoint:
1. Press FIND..
Averaging a Waypoint’s Location
You can average a new waypoint location over time to
produce a more accurate location.
2. Select Waypoints..
3. Select the waypoint you want to edit, and press
ENTER.
NOTE: You must have a GPS Satellite fix before
you can average a waypoint’s location.
4. Make changes by highlighting each field
and use the waypoint symbol chart, and
alphanumeric keypad to enter new data.
ꢅ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
To calculate a location by averaging:
1. Find a location you want to calculate an
average for, press M�RK > �vg to begin
averaging.
Proximity Waypoints
Use the Proximity Waypoints page to define an alarm
circle around a waypoint.
2. Press Save.
Radꢀus
field
Projecting a Waypoint
Create a new waypoint by projecting the distance and
bearing from one location to a new location.
Proximity
Empty lꢀne
icon
To project a waypoint:
1. Press FIND > Waypoints.
Proxꢀmꢀty
Alarm Tones
button
2. Select the waypoint you want to project. The
Waypoint page opens.
4. Press MENU to open the Options menu.
To add a proximity waypoint
1. Press MENU twice > Proximity.
5. Select Project Waypoint, and press ENTER to
open the Project Waypoint page.
2. Select an empty line, and press ENTER.
6. Enter the distance and bearing to the projected
waypoint in the appropriate fields at the bottom
of the page, and press QUIT when finished.
3. Select a waypoint from the Waypoints List or
from any other group of Find items to open the
information page for the item.
4. Select Use to add the point to the list on the
Proximity Waypoints page.
GPSMAP 76Cx Owner’s Manual
ꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
5. Using the ROCKER to select the Radius field
Man OverBoard (MOB)
and enter a value.
Another method for creating a waypoint is the Man
Overboard (MOB) feature. Use this application for
marking a location on water where you cannot stop
quickly and must return to a point where there are no
landmarks for reference.
To clear one or all proximity waypoints
from the list:
To remove or review a single entry, press
ENTER. To remove all waypoints from the list,
press MENU > Remove �ll.
To create a waypoint using the MOB
feature:
1. Press and hold FIND/MOB to mark the MOB
To turn proximity alarms on or off:
1. Press MENU twice to open the Main Menu.
2. Highlight the Proximity icon and press ENTER
waypoint.
to open the Proximity Waypoints page.
2. Press ENTER to open the Map page showing
the path from your current location to the MOB
point. Use the Compass page for additional
guidance to the MOB point.
3. Highlight the Proximity �larm Tones button,
and press ENTER to open the Alarm Tones
page. Place a check in the Proximity Alarms
box to activate alarms. As you approach a
proximity waypoint, a tone sounds and a “Near
Proximity Point” message appears. When
you move outside the set radius, a “Leaving
Proximity Point” message is shown. Use this
page to select tones for each alarm.
ꢁ0
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
Find By Name
Use Find By Name if you know the name of the
location you want to find.
Using the Find Menu
Use the Find Menu to search for waypoints,
geocaches, cities, and exits included in the GPSMAP
76Cx basemap. Additional icons appear depending on
the optional BlueChart g2 or MapSource data loaded
to the unit. Press FIND to open the Find Menu.
To find a location using Find By Name:
1. Press FIND to open the Find Menu.
2. Select the icon for the type of item for which
you want to search for, or search the entire
database by selecting �ll Points of Interest.
3. Press MENU > Find By Name.
4. Use the ROCKER to operate the on-screen
keypad and enter the name of the location
you want to find. When the Find list contains a
match, highlight OK.
Waypoint Options
Menu
5. Select the location item from the Find list,
and press ENTER. The item’s information
page opens, allowing you to save the item
as a waypoint, show the item on the map, or
automatically create a route to the item (Go To).
Fꢀnd Menu wꢀth optꢀonal
MapSource data
Cities Options Menu
When you access a Find list, it contains items near
your current location or the pointer.
The options menu for each category contains a
submenu of search options. Select a category.
GPSMAP 76Cx Owner’s Manual
ꢁꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
Using the Find Information Page
When you select an item from the Find List and
press ENTER, an information page shows detailed
information about the item. Each information page
contains three on-screen buttons. Different buttons
appear depending on whether you are selecting an
item to navigate to or adding an item.
Recent Finds
The Recent Finds page shows a list of the last 50
items you have searched for or gone to recently.
To go to a recently found item:
1. Press FIND.
2. Select Recent Finds.
Find Information Page Options
To use the Options Menu:
1. With an information page open for a Find item,
Recent
Fꢀnds ꢀcon
press MENU to open the Options Menu.
Lꢀst of
recently
found ꢀtems
2. Use the ROCKER to select an option:
•
•
•
Average Location—sample a new waypoint
location over time and average the result for a
Project Waypoint—create a new waypoint by
entering bearing and distance from a referenced
3. Use the ROCKER to select the item you want
to go to, and press ENTER.
4. Select Go To to begin navigation.
Find Near Here—return to the Find Menu to
search for map items near the item.
ꢁꢂ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
4. Press MENU, select Find Near Here. The
•
•
Change Reference—point to a new location on
the Map page using the pointer.
Find Menu opens again with each category
containing items near the item selected.
Set Proximity—program an alarm to sound
when you are within a specified radius of an
5. Select a category icon and press ENTER to
open a Find list of items near the item.
To find an item from another location on
the map:
1. Press FIND.
•
Add To Route—include this item on a
new route or add it to an existing route. See
2. Select an icon on the Find Menu.
•
•
•
View Sun and Moon—view Sun and Moon
3. Press MENU, select Change Reference. The
Map page appears.
View Hunt and Fish—view Hunt and Fish
4. Use the ROCKER to pan the arrow (pointer) to
the map location you want. The Find list shows
a list of items near the new map location.
Map Information—show the map from which
the map item originated. See the Appendix for
information about downloading detailed maps.
To find an item near another item:
1. Press FIND.
2. Select an icon on the Find Menu.
3. Select an item in the Find list.
GPSMAP 76Cx Owner’s Manual
ꢁꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
Finding a Waypoint
Finding a Geocache
The Waypoints page contains a list of all saved
waypoints. Waypoints are stored in alphanumeric
order and are identified by an assigned symbol.
Select Geocache to view the list of geocache
locations created by you or downloaded from your
computer. A geocache location is a waypoint with a
special geocache symbol to separate it from others.
For more information about geocaching log on to
http://my.garmin.com and click “Go Geocaching.”
To find a waypoint:
1. Press FIND.
2. Select Waypoints and choose a waypoint.
To find a geocache:
1. Press FIND.
2. Highlight Geocache. You can view found
geocaches or those that have not been found.
3. Use the ROCKER to highlight a geocache on
Waypoints
icon
the list.
4. Select Go To to navigate to the geocache
location. When you navigate to a geocache,
the Compass page changes to Geocache
Navigation mode and any additional information
about downloaded cache location is shown in
the comment field.
When a geocache is found, the unit marks the cache
as found, logs an entry into the calendar, and provides
an option that shows the nearest cache.
ꢁꢄ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
3. Use the ROCKER to select an exit, and
Finding a City
Select Cities from the Find Menu to find any city
listed in the mapping data.
press ENTER. This page contains the exit
description, a list of available services near the
exit, and the distance and bearing from the exit
to the highlighted service.
To find a city:
1. Press FIND.
4. Select a service from the list, press ENTER.
2. Select Cities. The Cities page shows a list of
Finding an Address
cities near your current location.
If you downloaded detailed mapping data, use the
Addresses icon on the Find Menu to find an address.
When you enter the street number, street name, and
city, the find feature matches that data with addresses
in the map database.
3. Select a city from the list and press ENTER.
OR
If the city you want is not listed, press MENU >
select a search method.
Finding an Interstate Exit
Use the Exits icon on the Find Menu to find an
interstate exit.
To find an interstate exit:
1. Press FIND.
2. Select Exits. A list of interstate exits near your
�ddresses
icon
location is shown.
�ddresses Page
GPSMAP 76Cx Owner’s Manual
ꢁ5
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
To find an address:
1. Press FIND.
Finding a Marine Point
If using MapSource BlueChart g2 marine cartograpy,
use the Marine menu which contains subcategories
including Wrecks, Tides, Navaids, Marine Services,
Anchorages, and Restricted Areas.
2. Select �ddresses.
NOTE: If your unit has a GPS fix, the <Enter
Region> field is populated with your current
region. You do not have to specify a city in the
<Enter City>, as the database has information
for the entire region. \
The Tide icon contains a list of tide stations with
information in a 24-hour span starting at midnight
station time is available for each tide station. The chart
shows a 24-hour block of time, with the time progressing
from left to right. The solid vertical lines represent 4 hour
increments; the dotted vertical lines represent 1 hour
increments.
3. Select <Enter Number> and type the street
number using the screen keypad. Select OK.
4. Select <Enter Street Name>. The street list
opens.
5. Use the screen keypad to enter enough of the
street name to show a match. Select OK. A list
of matches appears.
Enter the date for whꢀch
you want to vꢀew the tꢀde
ꢀnformatꢀon
6. Select the address you want.
Heꢀght of tꢀde
Finding an Intersection
This feature also requires detailed mapping data.
Follow the basic steps for finding an address when
searching for an intersection.
Tide Prediction Station
ꢁ6
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
If you are searching for a restaurant that is part of
To view the tide chart for another date:
1. From the Tide menu with the chart shown,
select Date, and press ENTER.
a national chain, only the restaurant nearest to your
location is shown when you search using the Find
Nearest option. If you search using the By Name
option, all of the locations for that chain in the
mapping database are shown with the closest to your
current location listed first.
2. Enter the date with the ROCKER. You can
also use the Zoom IN and OUT keys to view
information for another date. Press and hold IN
or OUT to scroll quickly through dates.
3. Press ENTER. The unit shows the chart for the
date you entered or selected.
POI Loader and Custom Points of
Interest
You can create your own category for points of
interest by using the Garmin POI Loader utility
available from the Garmin Web site
www.garmin.com/products/poiloader/. Follow the
Help instructions to use POI Loader.
To use the current date again, select the Date field.
Press MENU > Use Current Date.
Searching for a Point of Interest
If you downloaded MapSource detailed mapping, use
All Points of Interest to locate items such as nearby
restaurants, lodging, landmarks, and public buildings.
To find a point of interest:
1. Press FIND.
2. Select �ll Points of Interest to show a list of
all points near your current location.
3. Press MENU.
4. Select an item from the list, and press ENTER.
GPSMAP 76Cx Owner’s Manual
ꢁ7
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
To clear the track log:
1. Press MENU twice to open the Main Menu.
Using Tracks
The Tracks feature creates an electronic bread crumb
trail or “track log” on the Map page as you travel. The
track log contains information about points along its
path, including time, location, elevation, and depth
2. Select Tracks
.
3. Select the Clear button. A confirmation
message appears.
4. Select OK.
To set up a track log:
1. Press MENU twice > Tracks.
The track log starts recording as soon as the unit gets
a location fix. The percentage of memory used by the
current track log appears at the top of the Tracks page.
2. Select Setup.
•
Wrap When Full—the track log records over
the oldest data with new data.
Percentage
of memory
used
•
Record Method—Distance records track points
after a specified distance is traveled. Time creates
track points after a specified time has elapsed.
Auto allows you to choose from five intervals.
Lꢀst of
saved
tracks
•
•
Interval—records a track according to the
Record Method and Interval. Enter a specific
distance, time, or frequency.
Tracks Page
Color—select the color of the active track on
the map.
ꢁꢅ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
•
Log Track to Data Card—records the current
track log to the microSD card in addition to the
unit’s internal memory. Using this option allows
you to record a large number of track points
(depending on the capacity of the microSD card.)
Track logs on the data card are .gpx GPS position
To save a portion of the track log:
1. Press MENU twice > Tracks.
2. Select Save. A message appears asking you if
you want to save the entire track.
3. Select No to save only a portion of the track
log.
data files, and are not used by your unit.
4. Use the ROCKER to move the pointer to the
point on the track line that you want to be the
beginning point, and press ENTER.
To save the entire track log:
1. Press MENU twice > Tracks.
2
Select Save. A message appears asking you if
you want to save the entire track.
5. Repeat to select an ending point. Select OK.
To log tracks to the microSD card:
1. With the Track Log setup page shown, select
Data Card Setup.
3. Select Yes to save the track.
Track
name
2. Highlight the Log Track to Data Card option,
and then press ENTER. A current date .gpx file
appears in the Data Card Tracks list.
Track
dꢀstance
Calculated
area
This file is a continuous compilation of all track
data for the indicated date. As long as this
feature is enabled, a new file is recorded for
each day you use the unit. Recording continues
until the card is filled.
Track
color
Saved Track Page
GPSMAP 76Cx Owner’s Manual
ꢁꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
3. Use the USB cable to connect to your computer
and then access the USB Mass Storage feature
using Garmin MapSource or another .gpx file-
compatible application.
3. Press ENTER to start the area calculation.
As you begin to move and define the area’s
boundaries, a Stop button appears at the
bottom of the page.
4. When finished defining the area, press ENTER
and select Save.
4. To delete these track logs from the microSD
card, highlight individual logs, and then press
ENTER. Use the Delete �ll button to clear the
entire list.
Track Profiles
A Track Elevation Profile is created when using Digital
Elevation Model (DEM) maps. Refer to the Garmin
Web site for information about these maps.
NOTE: Do not remove the microSD card from
the unit while logging a track, as corruption of
the data can result.
To view a track profile:
1. Open the Saved Track page, and press MENU.
To view a track on the map:
2. Highlight Profile. The beginning of the track is
marked by a flag. Use the ROCKER to scroll
across the track profile. At any point along the
profile, press ENTER to show that point on the
map.
On the Saved Track page, select the Map. A
map showing the entire track appears. Begin
and End markers and user waypoints are
added to the track.
3. Press MENU to use Zoom Ranges and Hide
To calculate the area of a track:
1. With the Track Log page open and the Track
Log on, press MENU.
Symbols options.
2. Select �rea Calculation, and press ENTER.
ꢂ0
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
4. Move in the direction of the first turn. At the first
turn, directions to the next turn are shown, and
so on, until you reach your destination.
Elevatꢀon
5. Press MENU > Stop Navigation to exit.
Begꢀn
marker
End
marker
To create a waypoint on a saved track:
1. With the saved track on the map, use the
ROCKER to move the pointer on the track point
that you want to mark as a user waypoint.
Dꢀstance
from Begꢀn
and End
poꢀnts
2. Press ENTER.
Track Profile Page
Navigating a Saved Track
To use the TracBack feature:
1. With the Saved Tracks page for the track or the
Track Log open, select TracBackto show the
track. Select the point to TracBack.
2. Use ROCKER to move the pointer to the point
on the map to start navigating the TracBack.
3. Select Follow Road to route back to the point
using available roadways, or select Follow
Track to retrace your original path of travel.
The Map page gives directions to the first turn
on the track.
GPSMAP 76Cx Owner’s Manual
ꢂꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
3. Use the Find Menu to select a route waypoint
from one of the Find groups.
Creating a Route
Routing creates a sequence of waypoints that lead
you to your final destination. The GPSMAP 76Cx
stores 50 routes with up to 250 points each. Create
or modify a route using the Routes page, and add
waypoints to a route. Create complex routes using
MapSource map data.
4. Select Use to add it to the route.
5. Select Navigate .
Methods for routing you to a destination
•
If you select Go To on the Waypoint page, or
other Find items, a straight path is created.
•
If you select Navigate when on a Route page,
the GPSMAP 76Cx uses a route made of
waypoints or Find Menu items. It navigates
directly from point to point.
To create a route:
1. Press MENU twice > Routes.
2. Select New > <Select Next Point>.
•
If you select the Follow Roads option on the
Routing Setup page. Both Go To navigation
and point-to-point allow you to Auto-route
using roads. Auto-routing uses roadways in the
map database to automatically calculate a route
to your destination. Turns on roadways are
preceded by a guidance message with a graphic
of the turn.
Route Page
Route on the Map
Page
ꢂꢂ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
To preview the turns for an active route:
1. From the Routes page, select a saved route.
Navigating a Route
To navigate a saved route:
1. Press MENU twice > Routes.
2. Select Navigate to begin navigation.
3. Press QUIT to view the list of turns on the
2. Select a saved route > Navigate.
route. To view an individual turn, select it.
3. Select Follow Road or Off Road from the
prompt.
4. To stop navigating, press MENU > Stop
Navigation.
Using Auto-Routing
This feature is enabled when using City Navigator®
mapping data.
When you select a destination, and select Go To, you
are queried, “Follow Road” or “Off Road.”
�ctive Route Page
when following
roads
Turn Preview
Page
Using Follow Roads increases the number of turns
and shows an Active Route page.
Select Off Road, to view only a list of route points.
A “Calculating Route” message appears until the
route calculation is complete. Your route appears as a
magenta line overlaying the map.
4. Use the ROCKER to scroll through all turns.
GPSMAP 76Cx Owner’s Manual
ꢂꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
BaSIc operatIon
Select Distance to enter a radius so that when you are
within the entered distance, you are led to the next
point.
Editing a Route
Use the Route page to edit, change the route name,
and review route points.
Select Manual to transition to the next waypoint
anytime while navigating a route.
To change the name of the route:
1. Press MENU twice > Routes.
2. Select a saved route > select the route name
Route Page Options
field at the top of the Route page.
•
•
•
•
Remove All—removes waypoints from a saved
route.
To review individual route points:
1. Press MENU twice > Routes.
Reverse Route—reverses the order of the route
points in the saved route.
2. Select a saved route > select a point on the
Route page > ENTER > Review.
Profile—creates a vertical profile of the route
when using US DEM Topo maps.
3. Select Save, Map, or Go To.
Copy Route—makes a copy of the saved route
To delete a route:
with the same name, followed by a number.
From the page for that route, press MENU >
Delete Route.
•
•
Delete Route—deletes the saved route.
Change Data Fields—select different values
for the two data fields at the bottom of the page.
To select the off-road transition for a route:
1. Press MENU twice > Routes > MENU.
•
Restore Defaults—restore route settings to the
2. Select Off Road Transition > Route Leg
Transition.
factory default settings.
3. Select Manual or Distance when advancing to
the next point.
ꢂꢄ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn paGeS
MaIn paGes
The GPSMAP 76Cx has six main pages: Satellite page, Trip Computer page, Map page, Compass page,
Altimeter page, and the Main Menu. Cycle through these pages by pressing the PAGE key to move forward or
pressing the QUIT key to reverse. Add additional pages by using the Page Sequence option on the Main Menu.
The Active Route page appears when you are actively navigating.
Each page has an Options Menu. To view the Options Menu for a page, press MENU.
Satellite Page
Trip Computer
Page
Map Page
Compass Page
Main Menu
No Optꢀons
Avaꢀlable for the
Maꢀn Menu
Satellite Page
Options Menu
Trip Computer
Page Options
Menu
Compass Page
Options Menu
Map Page
Options Menu
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢂ5
MaIn paGeS
Satellite Page
Map Page
The Satellite page appears when you turn the unit
on and shows the receiver status, satellite locations,
satellite signal strength, and the receiver’s current
location.
A built-in basemap that includes cities, interstates,
state and county highways, exit information, and lake
and river outlines. The basemap can be enhanced with
the addition of MapSource or BlueChart g2 data.
Data fields
Satellite Page Options
•
Use With GPS Off/On—enables you to turn
the GPS receiver on or off.
•
Track Up/North Up—indicates whether
satellites are shown with the rings oriented
with North toward the top of the screen or your
current track toward the top of the screen.
Show sub-menu
•
•
•
Multicolor/Single Color—indicates whether
each satellite is shown in a different color or the
same color.
Map Page with data fields
New Location—use if you have moved the unit
more than 600 miles and you are having trouble
locking onto satellite signals.
Two map operating modes, position mode and pan
mode, determine what is shown on the map. Position
mode pans the map to keep your present location
in the screen area. The position marker shows
your travel on the Map page. When you press the
GPS Elevation—shows your current GPS
elevation.
ꢂ6
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn paGeS
ROCKER, the GPSMAP 76Cx enters pan mode,
which moves the map to keep the white arrow (map
pointer) within the screen area.
Using Additional Map Data
View listings such as nearby restaurants, lodging,
shopping centers, attractions, and entertainment, and
you can retrieve addresses and phone numbers for
any listed location when using optional MapSource
data. Using BlueChart g2 data, you can view marine
navaids, wrecks, obstructions, and anchorage
locations.
When you are in pan mode, you can move the map
pointer about the page to highlight and identify map
items. Add and configure up to four optional data
fields to the top of the page to provide a variety of
travel and navigational information.
To review map information:
1. From the Map page, press MENU > Setup
Map.
To show data fields on the Map Page:
1. Press MENU > Data Field.
2. Select the number of data fields you want to
2. Select the Map Setup-information page.
The list of maps stored on the microSD card
appears. A check mark means a map is active.
show on the Map page, and press ENTER.
To change a data field:
1. Press MENU > Change Data Fields. The first
Changing the Zoom Range
data field is highlighted.
Press IN to decrease the Zoom Range and show an
area with greater detail; press OUT to increase the
Zoom Range and show a larger area with less detail.
2. Press ENTER.
3. Select an option.
4. Move to the next field and repeat.
The current Zoom Range setting is shown in the
lower left corner of the Map page. If no further map
information is available, “overzoom” appears under
the Zoom Range When using MapSource detailed
GPSMAP 76Cx Owner’s Manual
ꢂ7
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn paGeS
measures the distance from your current
location to the map pointer.
maps, “mapsource” appears below the scale.
Map Orientation
•
•
Turn Declutter On (Off)—eliminates items on
the map that can block road details.
There are two map orientations in the Map Setup
option North Up orients the map like a paper map.
Track Up orients the map in the direction of travel.
Restore Defaults—returns to factory defaults.
Guidance Text
When navigating, guidance text appears above the
map.
Map Page Options
•
Stop (Resume) Navigation—stops/resumes
navigation.
•
•
Recalculate—recalculates a route.
Data Fields—opens the Show sub menu so you
can select the number of data fields to show:
Map Only, 1 wide, 2, 2 wide, 3, or 4 data fields.
Guidance text
To show guidance text:
1. Press MENU > Guidance Text.
•
Change Data Fields—allows you to select the
type of data in the data fields. This option is
available only if data fields are selected.
2. Select �lways Show, Never Show, or Show
When Navigating.
If you select Always Show, a guidance message
always appears.
•
•
•
Guidance Text—shows messages on the screen
advising you of your next navigation move.
Setup Map—accesses to six pages of display
options.
If you select Show When Navigating, a guidance
message shows until you select Stop Navigation.
Measure Distance (Stop Measuring)—
ꢂꢅ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn paGeS
Setup Map
Push pꢀn
ꢀndꢀcatꢀng the
begꢀnnꢀng
Measured
dꢀstance
Measuring Distance
To measure distance between two points:
1. Press MENU > Measure Distance. An on-
screen arrow appears on the map at your
current location with REF below it.
poꢀnt of the
measurement
End poꢀnt of
measurement
labeled REF
2. Move the arrow to the reference point (the
starting point you want to measure from),
and press ENTER. A push pin icon marks the
starting point on the map.
Compass Page
The Compass page guides you to your destination
with a graphic compass and a bearing or course
pointer.
3. Move the arrow to the point you want to
measure to. The distance between the two
points is shown in the upper-right corner.
GPSMAP 76Cx Owner’s Manual
ꢂꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn paGeS
destination.
•
•
•
•
Course or Bearing Pointer—toggles between
the course pointer and the bearing pointer.
Bearꢀng
Poꢀnter
Data Fields—selects the number of data fields
that appear on the Compass page.
The Compass
Rꢀng moves to
ꢀndꢀcate North
Orꢀentatꢀon.
Change Data Fields—selects the type of data
you want to show in the data fields.
Restore Defaults—returns to factory settings.
Compass Page
The rotating compass ring indicates the direction
you are heading. The bearing and course pointers
indicate the direction (bearing to or course of travel)
to your destination, relative to your current heading
direction. Choose a bearing pointer or course pointer
for guidance.
Compass Page Options
•
Stop (Resume) Navigation—turns active
navigation for a route or Go To on and off.
•
Recalculate—recalculates the path to a
ꢃ0
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn paGeS
If you are using the course pointer option, and you
Using the Course Pointer or Bearing
drift away from the line of travel from your original
location to your destination, the course deviation
indicator (an arrow with horizontal dotted line)
provides graphic indication of drift (right or left)
according to the scale shown on the compass ring.
Move to the right or left to get back on course.
Pointer
The bearing pointer and course pointer are
independent of each other. The bearing pointer
indicates the direction to your destination, and the
course pointer indicates your relationship to a course
line leading to the destination.
If the bearing pointer arrow is pointing straight
up, for example, you are going directly to your
destination. If it points any direction other than up,
turn toward that direction until the arrow is pointing
up and then continue in that direction. The bearing
pointer points to the destination.
0.25mi
Scale
The Course Poꢀnter ꢀndꢀcates your course of travel from
your orꢀgꢀnal locatꢀon and the dꢀstance off course.
The Bearꢀng Poꢀnter always ꢀndꢀcates the dꢀrectꢀon
to your destꢀnatꢀon from your current locatꢀon.
GPSMAP 76Cx Owner’s Manual
ꢃꢁ
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn paGeS
To select the course pointer or the bearing
pointer:
1. Press MENU to open the Compass page
options menu. The bearing pointer is the factory
default. When the bearing pointer option is
shown, the course pointer is active and vice
versa.
2. Highlight the bearing or course pointer option,
and press ENTER to start.
Data Fields
You can show two wide, three or four data fields on
the Compass page.
ꢃꢂ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
Tracks
MaIn Menu
The Main Menu contains settings and features not
found on the main pages and sub-menus. The time
and date are shown at the bottom of this page. The
Main Menu is accessible from any page by pressing
MENU twice. To select an item on the Main Menu,
highlight the menu item, and press ENTER.
Route Page
Highway Page
This page takes you point by point to your destination.
Main Menu
Highway Page
NOTE: If a page is added to the page sequence,
the page icon does not appear on the Main Menu.
To use the Highway page:
Select the Highway page from the Main Menu
and observe your path on the highway graphic.
GPSMAP 76Cx Owner’s Manual
ꢃꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
Display Setup Page
Setup Menu
You can choose a display mode, a color scheme for
day and for night viewing, adjust the amount of
time that the backlight stays on, and set the level of
brightness.
To access the Setup Menu:
From the Main Menu, select Setup.
System Setup Page
To access the System Setup:
To access the Display Setup page:
From the Setup Menu select System.
From the Setup Menu, select Display.
•
GPS—choose on the GPS options other than
Normal to save battery power.
•
Display Mode—set for Auto (changes from
day to night mode and back again at dusk and
dawn), Day only, or Night only.
•
WAAS/EGNOS—set to Enable or Disable.
•
•
•
Daytime Color Scheme—set in Day mode to
one of 10 color schemes.
•
Battery Type—choose the type of battery
being used in order to produce a more accurate
battery capacity report.
Nighttime Color Scheme—set in Night mode
to one of 10 color schemes.
•
•
•
Text Language—set the unit’s on-screen
language.
Backlighting Timeout—choose from Stays
On or delays of 15 seconds, 30 seconds, one
minute, or two minutes.
External Power Lost—set the unit to turn off
if external power is lost.
•
Backlight Intensity Level—use the slider to
adjust the brightness.
Proximity Alarms—turns custom POI and
Proximity alarms on and off.
Use the option menu to restore defaults, read microSD
card information, or view the version of unit software
and the Unit I.D. number.
ꢃꢄ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
To activate USB Mass Storage for HCx
Interface Setup Page
Use when connecting to a computer.
units:
1. Connect the unit to a computer.
To access the Interface Setup page:
2. Select USB Mass Storage, and press ENTER.
From the Setup Menu, select Interface.
3. Double click My Computer to observe a new
Serial Data Format—sets the data format to one of
Removable Drive listing.
the following:
To view information for the microSD card:
Press MENU prior to opening the USB Mass
Storage page and, select Card Info.
•
GARMIN—the proprietary format used
to exchange waypoint, route, track log and
MapSource data with a computer.
To transfer files to the microSD card:
•
•
•
NMEA In/NMEA Out—Supports input and
output of standard NMEA 0183 version 3.01 data.
1. Double-click the My Computer icon.
2. Browse the computer for the file.
TEXT OUT—Allows ASCII text output of
location and velocity information. No input.
3. For a computer, select the file, Edit > Copy.
NOTE: If you have several network drives
mapped to your computer, log on without
NONE—Provides no interfacing capabilities.
connecting to the network or click Start
Settings Control Panel Administrative
Tools Computer Management Storage
>
USB Mass Storage—allows the microSD card to be
used as a USB Mass Storage device. It also allows
transfer of Track Log Data to Garmin MapSource.
>
>
>
>
>
Disk Management and remap a drive letter
for the storage device.
4. After the transfer, end the USB cable connection.
GPSMAP 76Cx Owner’s Manual
ꢃ5
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
Tones Setup Page
Map Setup Page
Use the Map Setup page to adjust how items are
shown on the Map page.
This setup page allows you to select a unique tone for
each of the tone applications. (For proximity alarm
To customize the Map page display:
1. Press MENU > Setup Map. The top of the page
contains icons for each setup page.
Page Sequence Setup
Add, remove, or reorder any of the Main pages.
2. Use the ROCKER to select a page and to move
To move, insert or remove a Main page:
1. From the Setup Menu, select Page Seq.
up and down the feature fields on each page.
General
Poꢀnts
Informatꢀon
2. To rearrange a page in the page sequence,
select the page and press in. Select Move.
3. To insert a new page, select the page you want
Tracks
Text
Marꢀne
to insert if before, press ENTER > Insert.
3. With a Map Setup feature highlighted, press
ENTER to show the list of options for that
feature. Each page has a sub-menu of general
options. To access this menu, press MENU with
the preferred setup page displayed.
ꢃ6
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
Map Setup – General Page
•
Lock On Road—locks the map pointer to
display on the nearest road, compensating for
variances in map position accuracy.
The Map Setup – General page contains the settings
for Orientation, Below, Auto Zoom, Detail, and Lock
On Road.
Map Setup – Tracks Page
Use the Map Setup –Tracks page settings for Saved
Tracks, Track Log, Track Points, and Go To Line.
Map Setup – General Page
•
•
Orientation—selects how the map is shown.
North Up always shows north at the top of
the page. Track Up shows your current track
toward the top of the page.
Map Setup – Tracks Page
•
•
•
•
Saved Tracks—sets the maximum zoom range
at which saved tracks are shown on the map.
Below—sets the map scale at which the Track
Up feature displays. All scales above that revert
to the North Up map orientation.
Track Log—sets the maximum zoom range at
which active track logs are shown.
Track Points—sets the maximum number of
track points used to record a track.
•
•
Auto Zoom—zooms the map scale to include
the beginning and ending points of a route.
Go To Line—selects either a bearing or course
line for navigating a track.
Detail—selects the degree of map detail shown.
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢃ7
MaIn Menu
Map Setup – Points Page
Map Setup – Information Page
Use the Map Setup – Points page to set the map scale
at which Map Points, User Waypoints, Street Label,
and Land Cover appear on the Map page. Select Auto,
Off, or from 20 ft to 800 mi (50 m to 800 km).
Use the Map Setup – Information page to view a list
of downloaded detailed maps such as topographic,
marine charts, and maps with auto-routing capability.
Highlight a map to show it on the map or turn it off.
Map Setup – Information Page
Map Setup – Points Page
Press MENU to view options for displaying maps.
Map Setup – Text Page
Map Setup – Marine Page
Use the Map Setup – Marine page to customize
settings for marine colors, spot soundings, light
sectors, and symbol sets.
Use the Map Setup – Text page to select the text size
for descriptions of map items on the Map page. You
can select from Small, Medium, or Large.
Map Setup – Marine Page
Map Setup – Text Page
ꢃꢅ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
•
•
Marine Colors—toggles colors on or off.
Guidance Method—calculate routes based on:
Spot Soundings—toggles spot soundings on
or off.
•
•
•
Prompted—you are prompted to select a
preference before the route is calculated.
•
•
Light Sectors—select from On, Off, and Auto.
Follow Road—increases the number of turns
the route contains.
Symbol Set—select the symbol set to use
(Auto, GARMIN, NOAA, International).
Off Road—creates a direct line from your
current location to your destination. This is
useful when traveling outside of the detailed
map coverage area or where no roads exist.
Routing Setup
Use to customize the wayrouting functions behave.
To access the Routing Setup page:
From the Setup Menu, select Routing > Follow
Road Options.
Follow Road Method—select how the unit calculates
follow road routes based on:
•
•
•
Prompted—you are prompted to select a
preference before the route is calculated.
Faster Time—routes calculated are faster to
drive but might be longer in distance.
Shorter Distance—routes calculated are
shorter in distance but take more time to drive.
Next Turn Pop-up—turns the Next Turn pop-up
window on or off.
Routing Setup Page Follow Road Options
GPSMAP 76Cx Owner’s Manual
ꢃꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
Follow Road Options
Geocache Setup
See the Garmin web site for information on geocache
Geocaching.
Off Route Recalculation—set whether the unit
prompts you when it is recalculating your route
(Prompted) or recalculates automatically. You can turn
off-route recalculation off.
To setup the Geocache feature:
Calculation Method—set how the unit searches for
1. Access the Setup Menu, select Geocache.
the route.
2. Select the symbol fields if you want to assign
other symbols.
•
Quickest Calculation—calculates the route
the quickest, but it might not produce the best
route.
3. Select Yes or No for a calendar entry when a
geocache is found.
Marine Alarms Setup
•
•
•
•
Quick Calculation—takes more time to
calculate but generates a better quality route.
To access the Marine Setup page:
From the Setup Menu, select Marine.
Better Route—generates an even better quality
route but uses a longer calculation time.
•
Anchor Drag Alarm—sets an alarm when you
exceed a specified drift distance.
Best Route—generates the optimal route but
takes the longest time to calculat.
•
•
•
Off Course Alarm—sets an alarm to sound
when off course.
Calculate Routes For—set route calculation
for the vehicle you are operating to optimize
the route for your vehicle type.
Deep Water Alarm—sets the depth at which
the alarm sounds.
Shallow Water Alarm—sets the depth at
which the alarm sounds.
Avoid—avoid certain road types and maneuvers on
your route.
ꢄ0
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
MaIn Menu
•
Depth—select the unit of measurement (Feet,
Fathoms, or Meters).
Time Setup
To access the Time Setup page:
•
Temperature—sets the unit of measurement
(Fahrenheit or Celcius) to indicate the
temperature.
From the Setup Menu, select Time.
•
Time Format—choose from 12-hour or 24-
hour time format.
•
•
Time Zone—set to one of the eight US Time
Zones, or 24 International Time Zones.
Heading Setup Page
You can select the type of heading mode.
Daylight Saving Time—On or Off or Auto.
To access the Heading Setup page:
Units Setup
From the Setup Menu, select Heading.
To access the Units Setup page:
•
•
Display—choose from Cardinal Letters,
Degrees or Mils.
From the Setup Menu, select Units.
•
•
Position Format—sets the coordinate system
in which a location is shown.
North Reference—choose from True,
Magnetic, Grid or User options.
Map Datum—sets the description for
geographic location for, mapping, and
navigation and is not an actual map in the unit.
Welcome Page Setup
Insert a message when you turn the unit on.
•
•
Distance/Speed—sets the unit of measurement
to show your speed and distance.
Proximity Waypoints
Use the Proximity Waypoints page to define an alarm
Elevation (Vert. Speed)—sets the unit of
measurement (Feet (ft/min), Meters (m/min), or
Meters (m/sec).
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄꢁ
MaIn Menu
Calendar
Hunt & Fish
To access the Calendar:
To view predictions for a date and location:
From the Main Menu, select Hunt & Fish to
view the predictions for a different date. Select
Date to open the on-screen keypad. For a
location, select the Location field.
From the Main Menu, select Calendar.
Calculator
To access the Calculator:
From the Main Menu, select Calculator.
Games Menu
To open the Games Menu:
Stopwatch
From the Main Menu, select Games.
To access the Stopwatch:
From the Main Menu, select Stopwatch.
Sun and Moon
To access the Sun and Moon page:
From the Main Menu, select Sun and Moon.
ꢄꢂ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
appendIx
Power
appendIx
Source: Two 1.5 volt AA batteries, USB power, 12 V Adapter
Cable, or up to 36 VDC external power
Specifications
Battery Life: Up to 18 hours (typical use)*
Physical
*Alkaline batteries lose a significant amount of their capacity as the
temperature decreases. Use Lithium batteries when operating the GPSMAP
76Cx in below-freezing conditions. Extensive use of screen backlighting,
electronic compass, and audible tones significantly reduce battery life.
Size: 6.2" H x 2.7" W x 1.4" D
Weight: 7.6 ounces (216 g) w/batteries installed.
Display: 1.5" W x 2.2" H, 256-color, high resolution,
Accuracy
transreflective (160 x 240 pixels) with backlighting.
GPS: <10 meters (33 feet) 95% typical*
Case: Rugged, fully gasketed, water resistant, IEC-529, IPX7
Temp Range: 5 to 158oF (-15 to 70oC)*
*Subject to accuracy degradation to 100 m 2DRMS under the U.S. DoD
imposed Selective Availability (SA) Program when activated.
*The temperature rating of the GPSMAP 76Cx may exceed the usable range of
some batteries. Some batteries can rupture at high temperatures.
DGPS: 3-5 meters (10-16 feet) 95% typical*
*WAAS accuracy in North America.
Velocity: 0.05 meter/sec steady state
Performance
Receiver: WAAS/EGNOS enabled
Interfaces: NMEA 0183 version 2.3, and RS-232 and USB for
PC interface
Acquisition Times*:
Approx. 1 second (warm start)
Approx. 38 seconds (cold start)
Approx. 45 seconds (factory reset)
*On average for a stationary receiver with an open sky view.
Data Storage Life: Indefinite: no memory battery required
Map Storage: Dependant on the formatted capacity of the
microSD Digital Card
(A small portion of the card capacity has been used in
formatting the card for use.)
Update Rate: 1/second, continuous
Antenna: Built-in quad helix, remote antenna capability.
GPSMAP 76Cx Owner’s Manual
ꢄꢃ
Download from Www.Somanuals.com. All Manuals Search And Download.
appendIx
The USB Interface Cable provided with this unit allows
you to connect your GPSMAP 76Cx to a PC-compatible
computer’s USB port.
Interfacing
The following formats are supported for connection of
external devices.
Garmin Proprietary Sentences—PGRME (estimated
error), PGRMM (datum string), PGRMZ (altitude).
The NMEA 0183 version 3.01 interface format is
supported by the GPSMAP 76Cx and enables the unit
to drive up to three NMEA devices.
The following are the sentences for NMEA 0183,
version 3.01 output:
The Advanced NMEA Setup
Page, accessed from the
Approved sentences—GPGGA, GPGLL, GPGSA,
GPGSV, GPRMB, GPRMC, GPRTE, GPVTG,
GPWPL, GPBOD, GPAPB
Interface Setup Page Optꢀons
Menu allows you to enable or
dꢀsable NMEA sentences, set
waypoꢀnt ID’s and the precꢀsꢀon
of Lat/Lon mꢀnutes.
Optional Power/Data Serial Port Cable with Bare Wire Leads
ꢄꢄ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
appendIx
To connect to your computer using a Serial
Port connector:
1. Lift the Serial Port protective cover from the
back of the GPSMAP 76Cx and insert the
round indexed connector on the cable into the
matching port.
Connecting Your GPSM�P 76Cx
to a Computer
You can connect your GPSMAP 76Cx to your
computer using either a serial port or USB connector
cable.
2. Connect the remaining cable end to your PC
Serial port or other appropriate device.
NOTE: Fully install the supplied MapSource
program, Trip & Waypoint Manager, on your
computer before connecting the USB cable to the
computer.
3. Set your GPSMAP 76Cx interface setting to the
appropriate interface format. Refer to Interface
To connect your GPSM�P 76Cx to your
computer:
1. Lift the USB protective cover from the back
of the GPSMAP 76Cx and insert the smaller
connector on the USB cable into the matching
port.
Information �bout USB Drivers
The USB drivers should have been automatically
installed when you installed the MapSource program
that came with your GPSMAP 76Cx. When you
initially connect the GPSMAP 76Cx to a USB
port, your computer might prompt you to locate the
destination of the drivers for the device. You only
need to install the drivers once. After the drivers
are installed, your computer always detects your
GPSMAP 76Cx when it is connected. USB drivers
might be updated periodically. You can find updates at
2. Connect the remaining cable end to your
computer's USB port.
GPSMAP 76Cx Owner’s Manual
ꢄ5
Download from Www.Somanuals.com. All Manuals Search And Download.
appendIx
Storage
Caring for the GPSM�P 76Cx
The GPSMAP 76Cx case is constructed of
high quality materials and does not require user
maintenance except cleaning.
Do not store the GPSMAP 76Cx where prolonged
exposure to temperature extremes may occur (such
as in the trunk of a car) as permanent damage may
result. User information, such as waypoints and routes
are retained in the unit’s memory without the need
for external power. It is always a good practice to
back up important user data by manually recording
it or downloading it to a computer (transferring it to
MapSource).
Cleaning the Case
Clean the unit’s outer casing (except for the screen)
using a cloth dampened with a mild detergent solution
and then wipe dry. Avoid chemical cleaners and
solvents that may damage plastic components.
Cleaning the Screen
Water Immersion
The unit’s lens is coated with a special anti-reflective
coating that is sensitive to skin oils, waxes and
abrasive cleaners. Cleaners containing ammonia,
alcohol, abrasives, or anti-grease detergents will harm
the anti-reflective coating. It is important to clean the
lens using an eyeglass lens cleaner (that is specified as
safe for anti-reflective coatings) and a clean, lint-free
cloth.
The unit is waterproof to IEC Standard 60529 IPX7.
It can withstand immersion in 1 meter of water for 30
minutes. Prolonged submersion can cause damage to
the unit. After submersion, be certain to wipe and air
dry the unit before reuse.
ꢄ6
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
appendIx
•
Consult the dealer or an experienced radio/TV technician
for help.
FCC Compliance
This product has been tested and found to comply with Part
15 of the FCC interference limits for Class B digital devices
FOR HOME OR OFFICE USE. These limits are designed
to provide more reasonable protection against harmful
interference in a residential installation, and are more stringent
than “outdoor” requirements.
This product does not contain any user-serviceable parts.
Repairs should only be made by an authorized Garmin service
center. Unauthorized repairs or modifications could result in
permanent damage to the equipment, and void your warranty
and your authority to operate this device under Part 15
regulations
Operation of this device is subject to the following conditions:
(1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including
interference that may cause undesired operation.
Industry Canada Compliance
Category I radiocommunication devices comply with Industry
Canada Standard RSS-210. Category II radiocommunication
devices comply with Industry Canada Standard RSS-310.
This equipment generates, uses, and can radiate radio
frequency energy and may cause harmful interference to
radio communications if not installed and used in accordance
with the instructions. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one of the following measures:
Declaration of Conformity
Hereby, Garmin declares that this GPSMAP 76Cx is in
compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
To view the full Declaration of Conformity, see the Garmin Web
site for your Garmin product:
then select the Declaration of Conformity.
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
•
Connect the equipment into an outlet that is on a different
circuit from the GPS unit.
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
ꢄ7
appendIx
FROM THE USE, MISUSE, OR INABILITY TO USE THIS
PRODUCT OR FROM DEFECTS IN THE PRODUCT. Some
states do not allow the exclusion of incidental or consequential
damages, so the above limitations may not apply to you.
Garmin retains the exclusive right to repair or replace the unit
or software or offer a full refund of the purchase price at its
sole discretion. SUCH REMEDY SHALL BE YOUR SOLE
AND EXCLUSIVE REMEDY FOR ANY BREACH OF
WARRANTY.
Limited Warranty
This Garmin product is warranted to be free from defects
in materials or workmanship for one year from the date of
purchase. Within this period, Garmin will, at its sole option,
repair or replace any components that fail in normal use.
Such repairs or replacement will be made at no charge to the
customer for parts or labor, provided that the customer shall be
responsible for any transportation cost. This warranty does not
cover failures due to abuse, misuse, accident, or unauthorized
alteration or repairs.
To obtain warranty service, contact your local Garmin
authorized dealer or call Garmin Product Support for shipping
instructions and an RMA tracking number. Securely pack
the unit and a copy of the original sales receipt, which is
required as the proof of purchase for warranty repairs. Write
the tracking number clearly on the outside of the package.
Send the unit, freight charges prepaid, to any Garmin warranty
service station.
This product is intended to be used only as a travel aid
and must not be used for any purpose requiring precise
measurement of direction, distance, location or topography.
Garmin makes no warranty as to the accuracy or completeness
of map data in this product.
THE WARRANTIES AND REMEDIES CONTAINED
HEREIN ARE EXCLUSIVE AND IN LIEU OF ALL OTHER
WARRANTIES EXPRESS, IMPLIED, OR STATUTORY,
INCLUDING ANY LIABILITY ARISING UNDER ANY
WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE, STATUTORY OR OTHERWISE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
WHICH MAY VARY FROM STATE TO STATE.
Online Auction Purchases: Products sold through online
auctions are not eligible for rebates or other special offers
from Garmin. Online auction confirmations are not accepted
for warranty verification. To obtain warranty service, an
original or copy of the sales receipt from the original retailer
is required. Garmin will not replace missing components from
any package purchased through an online auction.
IN NO EVENT SHALL GARMIN BE LIABLE FOR
ANY INCIDENTAL, SPECIAL, INDIRECT, OR
CONSEQUENTIAL DAMAGES, WHETHER RESULTING
International Purchases: A separate warranty is provided
by international distributors for units purchased outside the
United States. This warranty is provided by the local in-
ꢄꢅ
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
appendIx
country distributor and this distributor provides local service
for your unit. Distributor warranties are only valid in the area
of intended distribution. Units purchased in the United States
or Canada must be returned to the Garmin service center in
the United Kingdom, the United States, Canada, or Taiwan for
service.
Software License �greement
BY USING THE GPSMAP 76Cx, YOU AGREE TO BE
BOUND BY THE TERMS AND CONDITIONS OF THE
FOLLOWING SOFTWARE LICENSE AGREEMENT.
PLEASE READ THIS AGREEMENT CAREFULLY.
Garmin grants you a limited license to use the software
embedded in this device (the “Software”) in binary executable
form in the normal operation of the product. Title, ownership
rights, and intellectual property rights in and to the Software
remain in Garmin.
Garmin International, Inc.
1200 East 151st Street,
Olathe, Kansas 66062, USA
Tel. (913) 397-8200 or
(800) 800-1020
You acknowledge that the Software is the property of
Garmin and is protected under the United States of America
copyright laws and international copyright treaties. You further
acknowledge that the structure, organization, and code of the
Software are valuable trade secrets of Garmin and that the
Software in source code form remains a valuable trade secret
You agree not to decompile, disassemble, modify, reverse
assemble, reverse engineer, or reduce to human readable form
the Software or any part thereof or create any derivative works
based on the Software. You agree not to export or re-export the
Software to any country in violation of the export control laws
of the United States of America.
Fax (913) 397-8282
Garmin (Europe) Ltd.
Liberty House
Hounsdown Business Park,
Southampton, Hampshire, SO40 9RB UK
Tel. +44 (0) 870.8501241 (outside the UK)
0808 2380000 (within the UK)
Fax +44 (0) 870.8501251
Garmin Corporation
No. 68, Jangshu 2nd Road,
Shijr, Taipei County, Taiwan
Tel. 886/2.2642.9199
Fax 886/2.2642.9099
GPSMAP 76Cx Owner’s Manual
ꢄꢆ
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
D
H
N
Index
databases 6
navigating
declutter 28
routes 23
Symbols
I
interfacing 44
intersections 16
O
�
addresses 15
E
P
L
B
language 34
backlight 4
batteries 2
F
FCC 46
find menu
M
map page
city 15
C
Q
geocache 14
intersection 16
waypoints 14
calculator 42
calendar 42
options 28
setup 36
R
MapSource 6
cleaning 46
routes
color 34
G
games 42
compass 29
auto-routing 23
creating 22
navigating 23
setup 39
messages 5
50
GPSMAP 76Cx Owner’s Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
For the latest free software updates (excluding map data) throughout the life of your
© 2007–2009 Garmin Ltd. or its subsidiaries
Garmin International, Inc.
1200 East 151st Street, Olathe, Kansas 66062, USA
Garmin (Europe) Ltd.
Liberty House, Hounsdown Business Park, Southampton, Hampshire, SO40 9LR UK
Garmin Corporation
No. 68, Jangshu 2nd Road, Shijr, Taipei County, Taiwan
Part Number 190-00557-00 Rev. E
Download from Www.Somanuals.com. All Manuals Search And Download.
|