24999
Universal Remote
Instruction Manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Congratulations.on.your.purchase.of.this.24999.Universal.Remote.
Control..It.is.one.of.the.most.unique.looking,.and.easy.to.use.remote.
controls.available.today..Its.stylish.looking.blue.backlight,.and.metallic.
keypad.is.like.no.other.remote..With.the.24999.juggling.multiple.remote.
controls.is.a.thing.of.the.past!.Your.24999.Universal.Remote.controls.
up.to.8.devices,.including.the.most.popular.brands.of.TV,.VCR,.DVD,.SAT,.
CBL,.and.audio.equipment..
Note:.Some.functions.from.your.original.remote.may.not.be.controlled.
by.the.24999.remote..Use.the.original.remote,.if.available,.to.control.
such.functions..Sometimes.buttons.other.than.described.in.these.
instructions.may.actually.perform.the.function..For.example,.the.CHAN.
and.VOL.buttons.might.be.used.to.navigate.through.menu.choices..
We.recommend.you.experiment.with.the.remote.to.identify.if.such.
situations.pertain.to.your.equipment..
The.24999.Universal.Remote.is.easy.to.use,.easy.to.program,.and.it.
gives.you.total.control—at.the.touch.of.your.fingertips!
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions
1.
26.
25.
24.
23.
22.
21.
20.
19.
18.
17.
16.
15.
14.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
Note:.The.REC button.must.be.pressed.TWICE.to.record.from.your.
device..For.some.brands.of.VCRs,.you.might.need.to.press.the.REC
button.once,.then.press.it.again.for.three.seconds.
Some.buttons.on.the.remote.might.have.functions.that.are.referred.
to.by.different.names.on.the.device.you.are.controlling..E.G..LAST.may.
be.called.RECALL,.or.ENTER may.be.called.DISPLAY..These.differences.
depend.on.the.brand.and.model.of.your.product..Also,.this.remote.can.
only.operate.features.that.exist.on.your.product..E.G.,.your.product.
must.have.LAST.ability.for.the.LAST button.to.operate.this.feature.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Button Functions, cont.
1. Liquid Crystal Display (LCD): Helps.with.setup.and.displays.the.
Mode.the.remote.is.in,.and.time,.etc.
2. SETUP: Used.for.setting.up.your.remote.
3. TV, DVD, DVR, etc.:.Selects.product.to.be.operated.
4. EXIT:.Exits.On-Screen.Menus/Returns.to.previous.On-Screen.
selection.
5. Dot:.Used.for.digital.channels,.e.g..2.3..
6. MENU: Brings.up.the.device.Menu.screen.(if.available).-.use.with.
UP,.DOWN,.LEFT,.and.RIGHT navigation.buttons.
7. MUTE: Turns.off.the.TV.sound.while.the.picture.remains.
8. . UP,.DOWN,.LEFT &.RIGHT: Navigation.buttons.
9. VOLUME UP/DOWN: Changes.the.volume.level.of.the.product,.
normally.the.TV.
10. OK: Selects.menu.items.for.the.device.you.are.controlling.
11. ABCD buttons:.Used.to.store.learned.commands.
12.. REPLAY: On.some.DVRs,.this.button.replays.the.last.8.seconds.of.a.
program.
13.. PAGE DOWN: Sets.your.Favorites.ratings,.and.moves.one.screen.
down.at.a.time.in.guides.and.menus.
14. RECORD, PLAY, STOP, REW, FF, PAUSE:.Control.buttons.that.
operate.your.DVD/DVR.even.when.the.remote.is.set.to.operate.the.
TV..Also.operates.DVD.Scan.-/+.
15. LIVE:.Returns.to.live.TV.
16.. PAGE UP:.Sets.your.Favorites.ratings,.and.moves.one.screen.up.at.
a.time.in.guides.and.menus.
17. INPUT: For.some.TVs,.press.repeatedly.to.select.available.viewing.
sources.(antenna,.cable.box,.VCR,.DVD,.etc.).
18. DVR List:.Press.to.display.list.of.recorded.shows.on.your.DVR.
19. CHANNEL UP/DOWN: Changes.the.channels..Also.controls.DVD/
CD.CHAPTER.+/-.track.selection,.i.e.,.DVD/CD.Track.Skip.Up/Down..
Note.the.DVR buttons.also.control.the.DVD.when.in.DVD.Mode.
20. LAST:.Returns.to.the.previously.selected.channel,.or.DVD.repeat.
toggle..
21. INFO: Displays/selects.on-screen.channel.information.
22. GUIDE:.Displays.on-screen.program.or.channel.guides.
23. ENTER:.Used.after.direct.channel.number.entry.to.immediately.
change.to.the.selected.channel.
24. NUMBERS:.Enter.numbers.for.direct.channel.selection..Some.
products.require.Enter.to.be.pressed.after.channel.selection.
25. ASPECT: Aspect.Ratio.Control.selects.viewing.format.for.the.
displayed.picture,.e.g.,.Wide,.Zoom,.etc.
26. POWER: Turns.device.on.or.off.
DVD/DVR Punch-Through Feature
This.remote.allows.the.6.DVD/DVR.transport.buttons.(i.e.,.PLAY,.PAUSE,.
STOP,.FF,.REWIND,.and.REC).to.operate.the.programmed.TV,.DVD,.
SAT,.DVR,.Cable.device.if.the.code.has.these.button.functions.e.g..if.
you.have.programmed.a.SAT/DVR.or.Cable/DVR,.etc..Otherwise.the.
transport.keys.will.punch-through.to.the.last.DVD.or.VCR.programmed.
mode.you.used,.i.e.,.the.transport.buttons.control.your.DVD.or.VCR.
player.even.when.you.are.in.TV,.SAT.or.Cable.mode.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Battery Installation
1..On.the.back.of.the.remote,.push.down.on.the.
tab.and.lift.the.cover.off.
2..Match.the.batteries.to.the.+.and.-.marks.inside.
the.battery.case,.then.insert.2.AAA.Alkaline.
batteries.
3..Press.the.battery.cover.back.into.place.
Battery Saver
Your.remote.automatically.turns.off.if.the.buttons.
are.depressed.more.than.30.seconds..This.will.
save.your.batteries.should.your.remote.get.stuck.
in.a.place.where.the.buttons.remain.depressed.
(e.g.,.between.the.sofa.cushions).
Code Saver
All.user.programmed.settings,.except.Time,.Day,.and.Date.will.be.stored.
in.permanent.memory.while.you.are.changing.batteries,.so.you.will.not.
lose.any.codes.stored.in.the.remote.while.you.are.changing.batteries..
Time,.Day,.and.Date,.will.be.cleared.to.the.factory.defaults.when.the.
batteries.are.replaced.
Power-On Default
The.remote.powers.on.in.TV.mode.
Liquid Crystal Display (LCD).
The.LCD.lets.you.see.at.a.glance.what.mode.the.remote.is.in..It.also.
includes.a.clock.that.displays.the.time.and.day,.and.a.visual.indication.
that.the.remote.is.transmitting.when.you.press.a.button.
Code Setup
The.SETUP.button.is.used.to.setup.the.remote..You.can.either.setup.the.
remote.using.the.code.for.your.brand.of.product,.from.the.code.tables.
(on.separate.sheet),.or.you.can.search.through.the.library.of.codes.until.
you.find.a.code.that.works.for.your.product.
You.can.store.any.kind.of.code.under.any.mode.(except.TV)..I.E..you.can.
store.a.VCR.code.under.the.CBL button,.or.a.DVD.code.under.the.VCR
button,.etc..However,.you.can.only.store.TV.codes.under.the.TV button.
The SETUP button.is.used.for.programming.the.remote.and.accessing.
any.additional.features.-.e.g..Shifted.functions,.see.below..To.enter.setup.
mode,.press.and.hold.the.SETUP button.until.“CODE.SETUP”.appears.in.
the.display..The.“SET”.symbol.will.always.be.shown.when.the.remote.is.
in.Setup..Successive.presses.of.the.SETUP button.shows.available.Setup.
options.in.the.order.shown.below..
1..CODE.SETUP.–.press.OK here.to.program.a.Mode.e.g..Code.Entry,.
Search,.etc..See.Code.Setup.options.below.
2..SYSTEM.SETUP.–.press.OK here.to.set.Time,.Date,.Volume.Control,.etc..
3..TIMER.SETUP.–.press.OK here.to.set.Timer.events.
4..LEARN.SETUP.–.press.OK here.to.program.a.Mode.with.Learned.
commands.
5..EXIT.SETUP.–.press.OK here.to.Exit.Setup.routines.and.return.to.
normal.operation.
Press.OK to.select.the.desired.programming.step.required..
Exit.from.Setup.occurs.automatically.after.approximately.15.seconds.if.
no.buttons.is.pressed..TIME.OUT.is.displayed.
When.the.remote.is.busy.processing.in.Setup.routines,.“Please.Wait”.is.
displayed.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup, cont.
Setup Screen Navigation.Use.the.SETUP,.OK,.and.Up,.Down,.Left.and.
Right.navigation.buttons.for.Setup.screen.navigation.and.selection..
To.exit.the.Setup.routines.and.return.to.normal.operation,.press.the.
EXIT button.or.navigate.to.the.“EXIT.SETUP”.screen.and.press.OK..
Completion.of.some.Setup.routines.will.automatically.return.the.remote.
to.normal.operation.
Mode button press Display.Pressing.and.holding.a.Mode.button.
changes.to.that.Mode.and.displays.the.active.Mode.and.its.code,.e.g.,.
DVD.and.the.programmed.4-digit.code.e.g.,.0768..The.display.returns.to.
normal.when.you.release.the.button.
SETUP (Shift) Display.Pressing.and.releasing.the.Setup.button.displays.
the.active.Mode.of.the.remote.e.g..DVD,.the.Date.e.g..3:26.(Month:Day).
and.indicates.“Shift”.operation.with.“(S)”..Press.and.release.Exit.to.return.
to.normal.display..To.use.the.SETUP button.for.Shift.-.Press.and.release.
SETUP followed.by.the.desired.secondary.function.button.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Entry
Code Setup Options:.Pressing.OK at.the.CODE.SETUP.screen.presents.
3.options.for.programming.a.Mode.with.codes..These.are.LIST.CODES.
(lets.you.enter.a.4.digit.code.from.the.on-screen.code.list),.ENTER.CODES,.
(lets.you.enter.a.4.digit.code.directly.from.the.printed.code.list).SEARCH.
CODES,.(lets.you.search.through.the.codes.stored.in.the.remote.to.find.
the.correct.one.for.your.device).
Code Entry using On-screen Code List
1..Manually.turn.on.the.device.to.be.controlled.
2..Press.and.hold.the.SETUP button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the.SETUP button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.and.release.OK..MODE.KEY?.is.displayed.
5..Press.and.release.the.desired.mode.button.(TV,.VCR,.DVD,.etc.)..The.
Mode.is.displayed.along.with.its.currently.programmed.code..
6..Using.the.UP/DOWN.buttons,.select.the.Device.type.to.be.
programmed.(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV
Device can be selected.
7..Press.and.release.OK to.confirm.selection..
8..The.Code.List.Brand.and.Code.will.now.be.displayed.(e.g..Admiral.
0000)..Use.the.UP/DOWN.buttons.to.select.the.Brand.and.LEFT/
RIGHT.buttons.to.select.the.Code..Codes.can.be.tested.on.your.
device.using.VOLUME, MUTE, CHANNEL, POWER, INPUT, PLAY,
STOP, FF, REWIND and.PAUSE. Once.the.correct.code.has.been.
found,.press.and.release.OK to.install.the.Code..
9..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.and.the.
remote.returns.to.normal.operation..
10..With.your.device.on,.press.CHANNEL UP..If.the.device.responds,.
no.further.programming.is.required..Note:.If.some.buttons.do.not.
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.
of.device..
Direct Code Entry
1..Manually.turn.on.the.device.to.be.controlled.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.the.DOWN navigation.button.until.ENTER.CODES.is.displayed..
5..Press.and.release.OK..MODE.KEY?.is.displayed.
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..The.
Mode.is.displayed.along.with.its.currently.programmed.code.
7..Enter.the.4.digit.code.from.the.code.tables.(on.separate.sheet)..After.
the.4th.digit.is.entered.SUCCESS.is.displayed.and.the.remote.returns.
to.normal.operation..
If.an.invalid.code.is.entered,.CODE.ERROR.is.shown.in.the.display.and.
the.remote.returns.to.normal.operation..
8..With.your.device.on,.press CHANNEL UP..If.the.device.responds,.
no.further.programming.is.required..Note:.If.some.buttons.do.not.
operate.your.equipment,.try.one.of.the.other.codes.for.your.brand.
of.device.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Entry, cont.
Searching for Codes
If.your.product.does.not.respond.after.you.have.tried.all.the.codes.for.
your.brand,.or.if.your.brand.is.not.listed,.try.searching.for.your.code.by.
following.these.steps.
1..Manually.turn.on.the.device.(TV,.VCR,.DVD,.etc.).to.be.controlled.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
3..Press.and.release.OK..LIST.CODES.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SEARCH.CODES.is.
displayed.
5..Press.and.release.OK..MODE.KEY.is.displayed.
6..Press.and.release.the.desired.mode.button.(TV, VCR,.DVD,.etc.)..
DEVICE?.TV.is.displayed.
7..Using.the.Up/Down.keys,.select.the.Device.type.to.be.programmed.
(TV,.VCR,.DVD,.etc..Note - For TV Mode, only a TV Device can be
selected.
8..Press.and.release.OK to.confirm.selection..SEARCH.KEY?.is.displayed..
9..Press.the.CHANNEL UP.button.(or.POWER,.or.PLAY for.VCRs/
DVDs).repeatedly.(up.to.300.times).until.the.Device.to.be.controlled.
changes.channel,.turns.off.or.responds.accordingly..SEARCHING.
is.displayed.(along.with.the.Device.selection).during.the.search.
process..If.the.desired.Code.is.accidentally.passed.then.press.the.
CHANNEL DOWN.button.to.backtrack.through.the.Library..Press.
CHANNEL UP.(or.POWER.or.PLAY).to.change.direction.forward.again..
10..Press.and.release.OK to.install.the.Code..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.
Notes:
1..If.the.Device.does.not.have.a.CHANNEL UP button,.use.PLAY (VCR/DVD).
or.the.POWER button.instead.
2..Code.Search.starts.from.the.currently.stored.4-digit.number.under.
that.Mode.
3..When.all.codes.have.been.searched.SEARCH.END.is.displayed.and.
remote.returns.to.normal.operation.
Code Identification Feature
Press.and.hold.the.respective.Mode.key.in.normal.operation.to.display.
the.programmed.code.for.that.Mode.e.g.,.DVD.Code.0768.
Programming Combo Device Codes
Some.combo.(combination).devices.(TV/DVR,.TV/DVD,.DVD/DVR,.etc.).
require.you.to.set.up.2.different.modes.to.control.both.parts.of.the.
combo..For.example,.if.you.have.a.TV/DVD.combo,.you.might.need.to.
set.up.one.code.under.the.TV.mode.to.control.the.TV.and.a.separate.
code.(under.other.modes).to.control.the.DVD.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup, cont.
System Setup Options
Pressing.OK at.the.SYSTEM.SETUP.screen.accesses.the.System.Setup.
Options.for.Volume.Punch-Through.control.Setup,.Time.Setup,.Date.Setup,.
Backlight.Setup.and.System.Reset.
Volume/Mute Control and Punch-Through Feature
Your.remote.allows.you.to.select.which.device.mode.controls.VOLUME.
and.MUTE..This.remote.is.initially.set.for.all.device.modes.to.use.their.
own.Volume/Mute.control.if.present..If.the.programmed.code.does.not.
have.Volume/Mute.operation,.then.VOLUME.and.MUTE.will.“punch-
through”.(hand-over).control.to.the.TV.mode.device.without.you.
needing.to.change.to.TV.mode..Note:.Any.mode.chosen.for.Volume/
Mute.control.must.have.its.own.Volume/Mute.function.or.else.VOLUME.
and.MUTE.will.not.function.
Setting ALL Volume/Mute Control to any one Mode (ALL VOL. SET)
This.routine.can.set.all.Modes.to.“punch-through”.to.any.one.chosen.
Mode.for.Volume/Mute.button.control.without.needing.to.change.to.
that.Mode.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.and.release.OK..ALL.VOL..MODE?.is.displayed.
6..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).for.Volume/
Mute.control..PLEASE.WAIT.is.briefly.displayed,.followed.by.SUCCESS.
and.the.remote.returns.to.normal.operation.
All.Modes.will.now.punch-through.to.your.chosen.Mode.for.Volume/
Mute.control..If.the.chosen.Mode.has.no.Volume/Mute.commands.of.its.
own,.“Volume.Error”.is.shown.in.the.display.and.the.remote.returns.to.
normal.operation..
Setting any Mode to use its own Volume/Mute Control (MODE VOL.
SET)
This.sets.any.Mode.to.use.only.its.own.Volume/Mute.control,.i.e..
Volume/Mute.punch-through.is.disabled.for.this.Mode..Note.-.If.your.
chosen.Mode.has.no.Volume/Mute.functions.of.its.own.then.the.
Volume/Mute.buttons.will.do.nothing.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.the.down.navigation.button.until.MODE.VOL..SET.is.displayed.
6..Press.and.release.OK..MODE.VOL..MODE?.is.displayed.
7..Press.and.release.desired.Mode.key.(TV,.VCR,.DVD,.etc.).to.be.disabled.
for.Volume/Mute.punch-through.control..PLEASE.WAIT.is.briefly.
displayed,.followed.by.SUCCESS.and.the.remote.returns.to.normal.
operation.
The.chosen.Mode.will.now.use.its.own.Volume/Mute.control.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup, cont.
Resetting Volume/Mute Control to Factory Defaults (VOL/MUTE
RESET) This.resets.Volume/Mute.control.back.to.its.Factory.default.
settings..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.and.release.OK..ALL.VOL..SET.is.displayed.
5..Press.the.down.navigation.button.repeatedly.until.VOL/MUTE.RESET.
is.displayed.
6..Press.and.release.OK..CONFIRM.RESET.is.displayed.
7..Press.and.release.OK..PLEASE.WAIT.is.briefly.displayed,.followed.by.
SUCCESS.and.the.remote.returns.to.normal.operation.
Volume/Mute.control.is.now.rest.to.its.Factory.default.settings.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup, cont.
Setting the Time of Day (TIME SETUP) To.set.the.Time.of.day.for.normal.
LCD.time.display..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.
(takes.about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.until.TIME.SETUP.is.displayed.
5..Press.and.release.OK..TIME?.is.displayed.showing.current.format.(12.
or.24.hour).flashing.and.current.time.
6..Use.the.Up/Down.navigation.buttons.to.set.the.format.(12Hr.or.24Hr).
then.press.and.release.OK.
7..The.“hours”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.hours.
(keep.going.past.12.to.select.PM.hours).then.press.and.release.OK..
8..The.“minutes”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.
minutes.then.press.and.release.OK.
9..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.
Setting the Date (DATE SETUP) To.set.the.Month,.Date.and.Day..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.DATE.SETUP.is.
displayed..
5..Press.and.release.OK..YEAR?.is.displayed.with.the.last.2.year.digits.
flashing..
6..Use.the.Up/Down.buttons.to.set.the.Year.then.press.and.release.OK.
7..MONTH?.is.displayed.with.the.Month.digits.flashing..Use.the.Up/Down.
buttons.to.set.the.Month.then.press.and.release.OK.
8..DATE?.is.displayed.with.the.Date.digits.flashing..Use.the.Up/Down.
buttons.to.set.the.Date.then.press.and.release.OK.
9..DAY?.is.displayed.with.the.Day.flashing..Use.the.Up/Down.buttons.to.
set.the.Day.then.press.and.release.OK.
10..SUCCESS.is.displayed,.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup, cont.
Setting the Backlighting On time (BACKLIGHT SETUP).To.set.the.length.
of.time.the.Backlighting.remains.on.after.you.stop.pressing.buttons.
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.BACKLIGHT.SETUP.
is.displayed..Press.and.release.OK.
5..BACKLIGHT.TIME?.is.displayed.with.the.current.Backlight.On.time.digits.
flashing..Use.the.Up/Down.buttons.to.set.the.Backlight.On.time.in.
increments.of.5.seconds.up.to.a.maximum.of.60.seconds..The.default.
Backlight.On.time.is.10.seconds..To.turn.the.Backlighting.feature.off,.
set.the.time.to.“00”.(zero)..Press.and.release.OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Reset the LCD Remote to Factory Defaults (SYSTEM RESET) To.reset.
the.remote.back.to.factory.default.settings..All.User.programmed.
settings,.e.g..code.settings,.learned.commands,.etc.,.are.cleared.to.their.
respective.default.settings..
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.until.SYSTEM.SETUP.is.displayed..
3..Press.and.release.OK..VOL/MUTE.SETUP.is.displayed.
4..Press.the.down.navigation.button.repeatedly.until.SYSTEM.RESET.is.
displayed..Press.and.release.OK.
5..CONFIRM.RESET.is.displayed..Press.and.release.OK.
6..PLEASE.WAIT.is.displayed.while.all.settings.are.Reset.then.the.remote.
exits.Setup.and.returns.to.normal.operation.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup, cont.
Timer Setup
Pressing.OK at.TIMER.SETUP.accesses.the.available.Timer.Options..
These.are.a.TV.Sleep.Timer.and.4.Timers.that.can.send.a.sequence.of.
up.to.3.key.commands.at.the.preset.time.
Setting and Clearing a TV Sleep Timer (TV Sleep Setup)
The.remote.can.be.programmed.with.a.TV.Sleep.Timer..At.the.end.of.
the.set.Timer.period,.the.remote.sends.the.Power.command.for.the.
TV.Mode.device..The.TV.Sleep.Timer.can.be.set.for.a.period.of.1-90.
minutes..The.“Zzz”.symbol.is.displayed.when.a.TV.Sleep.Timer.is.set.
To set a TV Sleep Timer (no “Zzz” in normal display)
1..Turn.on.the.TV.Mode.device.
2..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
3..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..Press.and.release.OK.
4..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.
5..TV.SLEEP.SET.is.displayed..Press.and.release.OK.
6..TV.SLEEP.TIME?.is.displayed.with.“minutes”.flashing..Use.the.Up/Down.
buttons.to.set.the.minutes.then.press.and.release.OK.
7..SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
Zzz.is.displayed.on.the.screen.to.indicate.that.a.Sleep.Timer.is.set.
To clear a TV Sleep Timer (“Zzz” in normal display)
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..Press.and.release.OK.
3..TV.SLEEP.SETUP.is.displayed..Press.and.release.OK.
4..TV.SLEEP.CLEAR.is.displayed..Press.and.release.OK.
5..CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
6..SUCCESS.is.displayed.and.the.remote.remains.in.Setup.Mode,.returning.
to.the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..
PLEASE.WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.
operation.
Setting and Clearing Timers (TIMER SETUP)
The.remote.can.be.programmed.with.up.to.4.Timers.(Timer.1,.2,.3.&.4)..
Each.Timer.can.be.assigned.up.to.2.keys.to.activate.at.the.set.time..The.
first.key.must.always.be.a.Mode.key..Subsequent.keys.cannot.include.
Up,.Down,.Left,.Right,.OK,.Exit,.Setup.or.any.Mode.key..Timers.can.only.
activate.within.the.following.24-hour.period..Timers.are.automatically.
cleared.after.activation..The.“Timer.Bell”.symbol.is.displayed.when.any.
Timer.is.set.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup, cont.
To set a Timer (Note, the Timer must be cleared first if it was previously
set – see To Clear a Timer below)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..
4.. Press.the.down.navigation.button.until.TIMER.X.SETUP.is.displayed.
(where.“X”.is.1,.2,.3.or.4)..Press.and.release.OK.
5.. TIMER.X.SET.is.displayed..Press.and.release.OK.
6.. TIMER.X.TIME?”.is.displayed.with.the.“hours”.flashing..Use.the.Up/Down.
buttons.to.set.the.hours.(keep.going.past.12.to.select.PM.times).then.
press.and.release.OK.
7.. The.“minutes”.will.be.flashing..Use.the.Up/Down.buttons.to.set.the.
minutes.then.press.and.release.OK.
8.. TIMER.X.MODE?.is.displayed..Press.and.release.the.desired.Mode.key.
(TV,.VCR,.DVD,.etc.).
9.. TIMER.X.Key1?.is.displayed..Press.and.release.the.key.required.(e.g..
POWER).
10.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation..
A.“Timer.Bell”.is.displayed.on.the.screen.to.indicate.that.a.timer.is.set.
To clear a Timer (“Timer Bell” in normal display)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.TIMER.SETUP.is.
displayed..
3.. Press.and.release.OK..TV.SLEEP.SETUP.is.displayed..
4.. Press.the.down.navigation.button.until.the.desired.TIMER.X.SETUP.is.
displayed.(where.“X”.is.1,.2,.3.or.4).screen..Press.and.release.OK.
5.. TIMER.X.CLEAR.is.displayed..Press.and.release.OK.
6.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
7.. SUCCESS.is.displayed..The.remote.remains.in.Setup.Mode,.returning.to.
the.CODE.SETUP.screen..Press.EXIT then.OK to.exit.Setup.Mode..PLEASE.
WAIT.is.briefly.displayed,.then.the.remote.returns.to.normal.operation.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Code Learning
Tips On Learning
You.can.only.learn.one.device.type.under.any.one.Mode.button.e.g..
only.learn.TV.codes.under.the.TV Mode,.DVD.codes.under.the.DVD
Mode,.etc..If.you.are.trying.to.learn.from.a.“Universal”.remote,.it.might.
have.more.than.one.code.type.stored.under.a.Mode..Try.learning.from.
another.remote.to.see.if.there’s.a.problem.with.the.type.or.brand.of.
remote.you.are.trying.to.learn.from..
a. Some functions from some types of remotes might not be able to
be learned.
b. No functions may be stored under the SETUP button.
c. Only one original device type can be learned per individual Mode.
d. Use.fresh.batteries.for.both.the.Learning.Remote.and.the.Original.
Remote.
e. Do.not.attempt.to.Learn.directly.under.an.incandescent.or.
low-energy.light.as.these.can.cause.interference.with.the.IR.
transmissions..Keep.at.least.3.feet.away.from.any.such.light.sources.
f. Perform.a.Master.Clear.(see.page.22).before.learning.and.try.learning.
2.or.3.commands.initially..Then.carry.out.a.Master.Clear.before.
completely.learning.your.original.remote’s.commands.
g..Carry.out.a.“Mode.Clear”.before.learning.a.Mode.to.make.sure.there.
are.no.previously.learned.commands.for.that.Mode.
h. Place.the.original.remote.end-to-end.with.the.Learning.Remote.so.
the.IR.transmitters.on.both.remotes.are.directly.in.line.with.each.
other..You.may.need.to.adjust.the.height.of.either.remote.to.achieve.
this..
i. Keep.the.distance.between.the.two.remotes.to.approximately.1.inch.
and.do.not.move.or.change.the.distance.between.the.two.remotes.
until.you.have.learned.all.the.required.buttons.for.that.Mode.
j. Avoid.learning.your.original.remote.Volume/Mute.buttons.unless.
you.are.sure.these.operate.the.same.device.e.g..some.original.DVD.
remotes.include.TV.Volume/Mute.button.control.and.can.be.two.
different.types.of.code.
k. Avoid.learning.your.original.remote.VCR.or.DVD.buttons.unless.
you.are.sure.these.operate.the.same.device.e.g..some.original.TV.
remotes.include.VCR.or.DVD.button.control.and.can.be.two.different.
types.of.code.
l..Learning.a.button.can.take.up.to.3.seconds..Do.not.release.the.button.
being.Learned.until.SUCCESS.or.LEARN.ERROR.has.been.displayed.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips On Learning, cont.
Tips On Learning, cont.
m. If.learning.the.first.or.second.buttons.for.a.Mode.results.in.
continuous.errors.then.try.the.following:
i... End.the.Learn.session.by.pressing.the.EXIT button.
ii...Clear.out.the.learned.commands.for.that.Mode.
iii...Check.the.IR.transmitters.are.correctly.aligned.between.the.two.
remotes.
iv...Adjust.the.distance.between.the.two.remotes.to.be.closer.(e.g..
half.an.inch).or.a.further.away.(e.g..2.inches).from.each.other.
v...Try.learning.the.original.remote.for.that.Mode.again.
If.problems.reoccur.with.the.same.button.check.the.original.remote.
button.being.learned.–.does.it.transmit?.Does.it.operate.the.target.
device?.Try.learning.that.button.under.a.different clear.Mode..If.it.learns.
okay.then.it.is.likely.to.be.a.different.code.type.from.the.others.and.
cannot.be.learned.under.the.same.Mode.
Learning Notes
1.. You.cannot.learn.under.the.Setup.button.
2.. All.learned.commands.for.a.Mode.are.deleted.if.the.same.or.a.new.
4-digit.code.is.entered.for.that.Mode.by.any.Code.Entry.or.Code.
Search.
3.. The.Backlighting.is.turned.off.for.Learning.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Learning Commands
1..Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2..Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK.
3..MODE.LEARN.is.displayed..Press.and.release.OK.
4..MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.
(TV,.VCR,.DVD,.etc.).
5..LEARN.KEY?.is.displayed..Press.and.release.the.key.on.the.24999.remote.
that.you.want.to.be.taught.a.code,.e.g..POWER.
6..LEARNING.is.displayed..Pointing.the.remotes.as.shown.below,.press.
and.hold.the.original.remote.key.(e.g..POWER).until.the.SUCCESS.or.
LEARN.ERROR.is.displayed.(see.Tips.on.Learning,.page.19).followed.by.
LEARN.MORE?.(this.process.can.take.up.to.2.or.3.seconds.to.complete)..
Release.the.original.remote.button.
7..LEARN.MORE?.is.still.displayed..To.learn.more.buttons,.press.and.release.
OK and.repeat.from.step.5..To.exit.at.this.point,.press.and.release.EXIT.
8..PLEASE.WAIT.is.displayed.briefly.and.the.remote.exits.Setup.Mode.and.
returns.to.normal.operation.
Line.up.your.remotes.(that.you’re.learning.from).in.front.of.the.Learning.
remote,.on.a.hard.surface.approx..1.inch.apart.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Clearing Commands
To Clear all Learned Commands under a mode
Clearing.learned.commands.is.helpful.if,.for.example,.you.replace.your.
CD.player.with.another.brand.or.model..If.you.had.learned.a.feature.
from.your.old.CD.player’s.original.remote.on.to.this.remote.(such.as.
RANDOM.PLAY),.that.feature.would.no.longer.work.for.your.new.CD.
player..Should.you.wish.to.remove.or.clear.one.or.more.“learned”.
commands,.follow.the.steps.below:
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.
3.. Press.the.down.navigation.button.until.MODE.CLEAR.is.displayed..Press.
and.release.OK.
4.. MODE.KEY?.is.displayed..Press.and.release.the.desired.Mode.button.
(TV,.VCR,.DVD,.etc.).
5.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
6.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.
exits.Setup.Mode.and.returns.to.normal.operation.
Master Clear - To Clear all Learned Commands under all modes
(recommended on first time Learning)
1.. Press.and.hold.the.SETUP.button.until.CODE.SETUP.is.displayed.(takes.
about.3.seconds),.then.release.the SETUP.button.
2.. Press.the.down.navigation.button.repeatedly.until.LEARN.SETUP.is.
displayed..Press.and.release.OK..MODE.LEARN.is.displayed.
3.. Press.the.down.navigation.button.repeatedly.until.ALL.LEARN.CLEAR.
is.displayed..Press.and.release.OK.
4.. CONFIRM.CLEAR.is.displayed..Press.and.release.OK.
5.. PLEASE.WAIT.is.briefly.displayed.followed.by.SUCCESS.and.the.remote.
exits.Setup.Mode.and.returns.to.normal.operation.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Remote does not operate your product.
•.Press.the.mode.button.of.the.product.you.want.to.control.
•.Program.the.remote.with.a.new.code.
•.Install.new.batteries..(You.might.have.to.reprogram.your.remote.after.
installing.new.batteries.)
•.Remote.may.not.be.compatible.with.your.product.
Remote does not operate some features of your product.
•.Program.remote.with.a.new.code.
•.Remote.may.not.be.able.to.operate.all.features.of.your.product.or.
button.names.might.be.different.than.your.product.
Lost Your Codes?
Should.you.lose.your.codes.or.programming.instructions,.you.can.find.
available.on.our.website:
www.jascoproducts.com
This device complies with part 15 of the FCC rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or
TV interference caused by unauthorized modifications to this
equipment. Such modifications could void the user’s authority to
operate the equipment.
90 Day Limited Warranty
Jasco.Products.Company.warrants.this.product.to.be.free.from.
manufacturing.defects.for.a.period.of.ninety.days.from.the.original.
date.of.consumer.purchase..This.warranty.is.limited.to.the.repair.or.
replacement.of.this.product.only.and.does.not.extend.to.consequential.
or.incidental.damage.to.other.products.that.may.be.used.with.this.
unit..This.warranty.is.in.lieu.of.all.other.warranties.express.or.implied..
Some.states.do.not.allow.limitations.on.how.long.an.implied.warranty.
lasts.or.permit.the.exclusion.or.limitation.of.incidental.or.consequential.
damages,.so.the.above.limitations.may.not.apply.to.you..This.warranty.
gives.you.specific.rights,.and.you.may.also.have.other.rights.which.vary.
from.state.to.state..If.unit.should.prove.defective.within.the.warranty.
period,.return.prepaid.with.dated.proof.of.purchase.to:
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK.73114-2205
20
Download from Www.Somanuals.com. All Manuals Search And Download.
24999
Universal Remote
Instruction Manual
Jasco.Products.Company
10.E..Memorial.Road
Oklahoma.City,.OK.73114-2205
24999-12/10
Made.in.China.
.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
|