GE Trash Compactor ZCGS150LSS User Manual

ZCGS150RSS - GE Monogram Stainless Steel 15" Built-In Compactor  
Dimensions and Installation Information (in inches)  
This compactor is designed as a built-in appliance  
only. It may be located in any convenient space  
under a countertop.  
Front View (not to scale)  
DO NOT OPERATE FREE-STANDING because the compactor  
will tip over when the drawer is pulled out.  
Additional Specifications: A 115 Volt, 60 Hz. power supply  
is required. An individual properly grounded branch circuit  
protected by a 15- or 20-amp circuit breaker or time delay  
fuse is recommended. Install a properly grounded 3-prong  
electrical receptacle recessed into the back wall. Electrical  
outlet location is critical for proper cord storage when  
compactor is installed.  
34" to 35"  
15"  
min.  
24"  
min.  
If the compactor is to be located in or near a corner of base  
cabinets, allow 6” minimum clearance from the corner for  
bag removal from the right side.  
Locate the  
outlet 18" min.  
from the floor.  
3" min. from  
either side  
33-3/4"  
min. to  
min.  
oor.  
35" max.  
om  
e
Clearances: Allow 6"  
clearance to a vertical  
wall on the right side  
for bag removal. Allow  
23" at the front for a full  
drawer opening.  
14-7/8"  
Stainless steel model  
24" case/door depth  
26" including handle  
For answers to your Monogram,® GE Profileor  
GE® appliance questions, visit our website at  
geappliances.com or call GE Answer Center®  
service, 800.626.2000.  
Listed by  
Underwriters  
Laboratories  
Specification Created 4/09  
160011  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Euro Pro Vacuum Cleaner NV31 User Manual
Extron electronic Stereo Amplifier MDA 5A RCA User Manual
Fender Guitar American Stratocaster User Manual
Field Controls Switch LS 140A User Manual
Fiesta Gas Grill ESD45055 BC303 User Manual
Fluke Work Light 341a User Manual
Gateway Flat Panel Television GTW P46M103 User Manual
Gefen Cable Box EXT DVI 2 VGAN User Manual
GE Mixer 106651N User Manual
Global Upholstery Co Computer Hardware 3307568 User Manual