CGS980SEMSS
GE Café 30" Free-Standing Gas Range
Dimensions and Installation Information (in inches)
Recommended common
area for gas outlet and
electrical outlet
You must use the rear filler strip kit shipped with
the range or the optional accessory backguard
when installing these ranges
30"
30
Note: Cabinets installed adjacent to slide-in
ranges must have an adhesion spec of at least
194° temperature rating.
4
4
+
_
36-1/4" 1/4
37-1/4"
Installation Information: Before installing, consult
installation instructions packed with product for
current dimensional data.
24
13
Recommended
area for 120V outlet
on rear wall and
area for thru the
wall connection
of pipe stub and
shut-off valve
26-1/4"
2
2-1/2
46-3/8"
14-1/2
9
Recommended area
for thru the floor
connection of pipe stub
and shut-off valve
Counter Cutout Dimensions (in inches)
If you are NOT using the
Filler strip or Backguard:
If you are using the
Filler strip or Backguard:
25
23-3/16
30
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
30
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Specification Revised 12/07
230151
Download from Www.Somanuals.com. All Manuals Search And Download.
|