Wireless Rechargeable
Optical Mini Mouse
Instruction Manual
HO97663
For technical support, contact Jasco Products
1-800-654-8483
Revision 3
Download from Www.Somanuals.com. All Manuals Search And Download.
Scroll wheel
illuminates when
batteries are low
Special Mouse Functions
To turn your mouse off while traveling,
press and hold the scroll wheel button.
While pressing the scroll wheel button, press
the link button on the bottom of the mouse.
To turn the mouse on, repeat this process.
The mouse will go to sleep when idle for
a long period of time to save batteries. To
wake the mouse, press any mouse button.
When the batteries are low, the scroll
wheel will become illuminated. It is time to
charge/change the batteries. (See page
4.) Afterwards, you will need to re-link your
mouse. (See page 5.)
USB Recharging Cable
USB
charging
cable
Your Wireless Rechargeable Optical Mini
Mouse comes with a USB recharging cable.
This allows you use your mouse while it is
being recharged, instead of having to wait
hours for a recharging cradle.
Simply plug the USB recharging cable into
the mouse as shown in the picture, and
insert the USB end of the cable into an
available USB port on your computer
or USB hub.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Place thumb
here, push down
and away
Battery Installation
1. Place the mouse in the palm of your
left hand, with the scroll wheel at the
bottom and the GE logo at the top.
2. While holding the mouse in your left
hand, locate the battery compartment
release and with your right hand press
and hold the battery compartment
release using a pointed object. (Refer
to picture for steps 2 and 3)
3. Begin to grip the mouse firmly in
your left hand. Refer to the picture
and place the thumb of your left
hand where indicated. Then push
your thumb away from your body to
release the battery cover.
Battery
compartment
release
4. Set the battery compartment cover
aside. Insert 2 AAA batteries, being
sure to match the polarity of the
batteries with the polarity markings
inside the battery compartment.
5. Replace the battery
compartment cover.
6. Re-link your mouse. (See pg 5.)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Linking Your Mouse
& Receiver
Please keep these directions in a safe
place. Each time you replace the batteries
you will need to re-link your mouse.
1. Insert the enclosed batteries into the
battery compartment of your mouse
following the directions on page 4.
2. Plug the mini USB receiver into an
available USB port on your computer or
USB hub. It is not necessary to reboot
your computer.
3. If prompted, insert your Windows disk
and follow the on screen instructions.
(This step is not necessary for all
operating systems. Your system will
prompt you if it is necessary.)
Link button
4. Press the link button on your receiver.
5. Press the link button on the bottom of
your mouse.
Your mouse should now function normally.
Move your mouse to test functionality.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Software Installation
Your GE mouse comes with Office Selector Software. To install,
simply insert the CD that came with your purchase, and follow the
on screen instructions.
Using the Office® Selector Software
By pressing the button on top of the mouse, you have access to
Microsoft Office® functions at your fingertips. Press the Office®
Selector button to navigate into Microsoft Word®, Excel® or any
of the other Microsoft programs listed below. Once you are in a
program like Microsoft Word®, press the Office® Selector button
again, and you will be able to choose from another set of shortcuts
like Print, Open, or Save.
Office®
Selector
Button
Troubleshooting
The Mini Optical Mouse does not work properly.
• Optical mice do not work well on glass or highly reflective
surfaces. Try using your mouse on a different surface.
• If your mouse has been idle for a period of time it may be asleep
to conserve battery power. Press the left mouse button to wake it.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
• Re-link your mouse. Press the link button on the receiver. Press
the link button on the bottom of your mouse.
Scrolling left & right does not work smoothly.
• Your operating system may not support this function.
Mouse will not move.
• Press your left mouse button to wake your mouse.
• Re-link your mouse. See section 5.
• Sometimes screen savers interfere with the wake feature. Turn
off your screen saver. If the mouse works, try using a different
screen saver.
• Change the batteries on your mouse. See section 4.
• Not all laptops support USB mice. Test the mouse on a desktop
computer. If this works, contact your laptop dealer.
Five Year Limited Warranty
Jasco Products Company warrants this product to be free from manufacturing defects for
a period of five years from the original date of consumer purchase. This warranty is limited
to the repair or replacement of this product only and does not extend to consequential
or incidental damage to other products that may be used with this unit. This warranty is
in lieu of all other warranties express or implied. Some states do not allow limitations on
how long an implied warranty lasts or permit the exclusion or limitation of incidental or
consequential damages, so the above limitations may not apply to you. This warranty
gives you specific rights, and you may also have other rights which vary from state to state.
If unit should prove defective within the warranty period, return prepaid with dated proof of
,
purchase to: Jasco Products Company, 10 East Memorial DrOklahoma City, OK 73114.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Statement
Notice: Federal Communications Commission (FCC) requirements, Part 15
This equipment has been tested and found to comply with the limits for a class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes of modifications not expressly approved by the grantee of this
device could void the users authority to operate the equipment. This device complies
with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Distributed for THOMSON INC
by Jasco Products Company
311 N.W. 122nd Street, Oklahoma City, OK 73114
8
Download from Www.Somanuals.com. All Manuals Search And Download.
|