Owner’s
Manual
Double-Door, Double-Drawer,
Stainless Steel, Free-Standing
Refrigerators
225D1804P011
49-60617
04-10 GE
monogram.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Information
Stainless Steel Refrigerator
You’ll see them on a label inside the fresh food
compartment at the top on the right side.
Before sending in this card, please also write
these numbers here:
Write
down
Please write these numbers on the Consumer
Product Ownership Registration Card included
with the packing material.
the model
& serial
numbers
Model Number
Serial Number
Use these numbers in any correspondence
or service calls concerning your refrigerator.
Immediately contact the dealer (or builder) that
sold you the refrigerator.
If you
received a
damaged
refrigerator
Before you request service, check the Problem
Solver in the back of this manual.
It lists causes of minor operating problems that
you can correct yourself.
Save time
& money
To obtain service, see the Consumer Services
page in the back of this manual.
For customers in Canada:
If you
need
service
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
We’re proud of our service and want you to be
pleased. If for some reason you are not happy
with the service you receive, here are steps to
follow for further help.
NEXT, if you are still not pleased, write all
the details—including your phone number to:
For customers in the USA:
Manager, Consumer Relations
Mabe Canada Inc.
1 Factory Lane, Suite 310
Moncton, N.B. E1C 9M3
FIRST, contact the people who serviced your
appliance. Explain why you are not pleased.
In most cases, this will solve the problem.
NEXT, if you are still not pleased, write all
the details—including your phone number—to:
Manager, Customer Relations
GE Appliances
Appliance Park
Louisville, KY 40225
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
READ AND SAVE THESE INSTRUCTIONS
• Keep fingers out of the “pinch point” areas:
clearances between the doors and between
the doors and cabinet are necessarily small.
Be careful closing doors when children are
in the area.
WARNING:
When using this
appliance, always exercise basic safety precautions,
including the following:
• Use this appliance only for its intended purpose
as described in this Owner’s Manual.
• Unplug your refrigerator before cleaning and
making repairs. NOTE: We strongly recommend
that any servicing be performed by a qualified
individual.
• This refrigerator must be properly installed in
accordance with the Installation Instructions
before it is used.
• Before replacing a burned-out light bulb,
the refrigerator should be unplugged in order
to avoid contact with a live wire filament.
(A burned-out light bulb may break when
being replaced.)
• Do not allow children to climb, stand or hang
on the shelves in the refrigerator. They could
damage the refrigerator and seriously injure
themselves.
• Do not touch the cold surfaces in the freezer
compartment when hands are damp or wet.
Skin may adhere to these extremely cold surfaces.
NotE: Turning control to OFF does not remove
power to the light circuit.
• Do not refreeze frozen foods which have thawed
completely.
• Do not store or use gasoline or other flammable
vapors and liquids in the vicinity of this or any
other appliance.
• In refrigerators with automatic icemakers,
avoid contact with moving parts of the ejector
mechanism, or with the heating element located
on the bottom of the icemaker. Do not place
fingers or hands on the automatic icemaking
mechanism while the refrigerator is plugged in.
DANGER: RISK OF CHILD ENTRAPMENT
Child entrapment and suffocation are not problems
of the past. Junked or abandoned refrigerators are
still dangerous…even if they will sit for “just a few
days.” If you are getting rid of your old refrigerator,
please follow the instructions below to help prevent
accidents.
Before you throw away your old refrigerator
or freezer:
• Take off the doors.
• Leave the shelves in place so that children
may not easily climb inside.
REFRIGERANTS
All refrigeration products contain refrigerants, which
under federal law must be removed prior to product
disposal.
If you are getting rid of an old refrigeration product,
check with the company handling the disposal
about what to do.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
MESURES DE SÉCURITÉ IMPORTANTES
LIRE ET CONSERVER CES INSTRUCTIONS
• Éloignez les doigts des parties du réfrigérateur
où l’on peut facilement se pincer : les espaces
entre les portes et entre les portes et les placards
sont toujours étroits. Soyez prudent lorsque
vous fermez les portes de l’appareil en présence
des enfants.
AVERtISSEMENt:
Lorsque
vous utilisez le réfrigérateur, observez toujours
certaines précautions de base, notamment :
• N’utilisez le réfrigérateur que pour son usage
prévu, comme décrit dans le présent manuel.
• Débranchez votre réfrigérateur avant
de le nettoyer et de le réparer. REMARQUE : Nous
vous recommandons vivement de confier toute
réparation à un technicien qualifié.
• Installez le réfrigérateur conformément aux
directives d’installation avant de l’utiliser.
• Ne laissez pas les enfants grimper, s’asseoir,
se tenir debout ni se pendre aux clayettes
du réfrigérateur. Ils pourraient endommager
le réfrigérateur et se blesser gravement.
• Avant de remplacer une ampoule grillée,
le réfrigérateur doit être débranché afin
d’éviter tout contact avec un fil sous tension.
(Une ampoule grillée peut se briser pendant
l’opération).
• Une fois le réfrigérateur en marche, ne touchez
pas les surfaces froides du congélateur, surtout
si vous avez les mains humides ou mouillées :
la peau risque d’adhérer à ces surfaces très
froides.
REMARQUE : Lorsque vous placez la commande
sur éteint, l’alimentation électrique de l’ampoule
n’est pas coupée.
• N’entreposez et n’utilisez pas d’essence ou
autres vapeurs et liquides inflammables à
proximité de cet appareil ou de tout autre
appareil électroménager.
• Ne faites pas recongeler des aliments surgelés
qui ont complètement dégelé.
• Pour les réfrigérateurs dotés d’une machine
à glaçons automatique, évitez le contact avec
les pièces mobiles du mécanisme éjecteur,
ou avec l’élément chauffant situé à la partie
inférieure de la machine à glaçons. Ne posez
pas les doigts ou les mains sur le mécanisme
de la machine à glaçons pendant que
le réfrigérateur est branché.
DANGER: RISQUES POUR LES ENFANTS
Les enfants pris au piège ou morts d’asphyxie sont
toujours d’actualité. Les appareils de réfrigération
abandonés sont toujours aussi dangereux, même
si on n’attend que “quelque jours” pour s’en
débarasser. Si vous ne gardez pas votre ancien
appareil, veuillez suivre les directives ci-dessous
afin de prévenir les accidents.
Avant de vous débarasser de votre vieux
appareil de réfrigération :
• Démontez les portes.
• Laissez les clayettes en place afin d’empêcher
les enfants de grimper à l’intérieur.
REFRIGERANTS
Tous les appareils de réfrigération contiennent
des refrigerants qui, conformément aux lois
fédérales, doivent être enlevés avant toute
élimination de l’appareil.
Si vous vous débarrassez de vieux appareils de
réfrigération, vérifiez, auprès de la société qui
s’occupe de leur élimination, ce que vous
devez faire.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
HOW TO CONNECT ELECTRICITY
Do not, under any circumstances, cut or remove
the third (ground) prong from the power cord.
For personal safety, this appliance must be
properly grounded.
This provides the best performance and also
prevents overloading house wiring circuits which
could cause a fire hazard from overheated wires.
Never unplug your refrigerator by pulling
on the power cord. Always grip plug firmly
and pull straight out from the outlet.
The power cord of this appliance is equipped
with a 3-prong (grounding) plug which mates
with a standard 3-prong (grounding) wall outlet
to minimize the possibility of electric shock
hazard from this appliance.
Repair or replace immediately all power cords
that have become frayed or otherwise damaged.
Do not use a cord that shows cracks or abrasion
damage along its length or at either end.
Have the wall outlet and circuit checked by
a qualified electrician to make sure the outlet
is properly grounded.
When moving the refrigerator away from the wall,
be careful not to roll over or damage the power cord.
Where a standard 2-prong wall outlet is
encountered, it is your personal responsibility
and obligation to have it replaced with a
properly grounded 3-prong wall outlet.
The refrigerator should always be plugged into
its own individual electrical outlet which has
a voltage rating that matches the rating plate.
USE OF EXTENSION CORDS
Because of potential safety hazards under
certain conditions, we strongly recommend
against the use of an extension cord.
However, if you must use an extension cord, it is
absolutely necessary that it be a UL-listed, 3-wire
grounding type appliance extension cord having
a grounding type plug and outlet and that
the electrical rating of the cord be 15 amperes
(minimum) and 120 volts.
SAVE THESE INSTRUCTIONS
6
Download from Www.Somanuals.com. All Manuals Search And Download.
MESURES DE SÉCURITÉ IMPORTANTES
RACCORDEMENT ÉLECTRIQUE
Ne coupez ni retirez en aucun cas la troisième
broche (mise à la terre) de la fiche du cordon
d’alimentation. Pour votre sécurité, cet appareil
doit être correctement mis à la terre.
Cette précaution est recommandée pour garantir
un rendement optimum et éviter une surcharge des
circuits électriques de la résidence, ce qui pourrait
créer un risque d’incendie par surschauffe des fils.
Le cordon d’alimentation de cet appareil est
muni d’une fiche à 3 broches (mise à la terre)
qui se branche dans une prise mural ordinaire
à 3 alvéoles (mise à la terre) pour réduire au
minimum les risques du chocs électriques.
Ne débranchez jamais l’appareil en tirant le cordon
d’alimentation. Saisissez fermement la fiche
du cordon et tirez droit pour la retirer de la prise.
Réparez ou remplacez immédiatement tout cordon
effiloché ou endommagé. N’utilisez pas un cordon
fendillé ou présentant des signes d’usure.
Faites examiner la prise de courant et le circuit
par un électricien qualifié pour vous assurer
que la prise est correctement mise à la terre.
Lorsque vous déplacez l’appareil du mur, faites
attention de ne pas la faire rouler sur le cordon
d’alimentation afin de ne pas l’endommager.
Si la prise murale est du type standard à 2 alvéoles,
il vous incombe de la faire remplacer par une prise
à 3 alvéoles correctement mise à la terre.
La machine à glaçons doit toujours être
branché dans sa propre prise de courant,
dont la tension nominale est identique
à celle indiquée sur la plaque signalétique.
CORDONS PROLONGATEURS
Nous vous recommandons fortement de ne pas
utíliser de cordons prolongateurs à cause des
qu’il s’agisse d’un cordon à 3 fils avec mise à la terre
pour appareils électroménagers homologué UL
risques potentiels qu’ils présentent dans certaines aux États-Unis) ou homologué CSA (au Canada),
conditions.
pourvu d’une fiche et d’une prise mises à la terre
de 15 ampères (minimum) et de 120 volts.
Toutefois si vous décidez d’utiliser tout de même
un cordon prolongateur, il est absolument nécessaire
CONSERVEZ CES DIRECTIVES
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating Instructions
Stainless Steel Refrigerator
Temperature
controls
The temperature controls are preset in the factory at 37°F
for the fresh food compartment and 0°F for the freezer
compartment. Allow 24 hours for the temperature to stabilize
to the preset recommended settings.
The temperature controls can display both the SEt temperature
as well as the actual temperature in the fresh food and freezer
compartments. The actual temperature may vary slightly
from the SEt temperature based on usage and operating
environment.
Setting either or both controls to oFF stops cooling in both
the freezer and fresh food compartments but does not shut
off electrical power to the refrigerator.
NotE: The refrigerator is shipped with protective film covering
the temperature controls. If this film was not removed during
installation, remove it now.
To change the temperature, press and release
To turn the cooling system off, tap
the
(warmer) or
(colder) pad. The SET light
will come on and the
the
(warmer) pad for either the fresh food
compartment or the freezer until the
display will show the set temperature. To change
display shows OFF. To turn the unit back on,
the temperature, tap either the
(colder) pad until the
(warmer) or
press
the
(colder) pad for either the fresh food
desired temperature is displayed. Fresh food
temperatures can be adjusted between 34°F
and 44°F and the freezer temperatures can be
adjusted between -6°F and +6°F.
compartment or freezer. The SET light will
illuminate on the side you selected. Then press
the
(colder) pad again (on the side where
the SET light is illuminated) and it will go
to
Once the desired temperature has been
set, the temperature display will return to
the actual fresh food and freezer temperatures
after 5 seconds. Several adjustments may
be required. Each time you adjust controls,
allow 24 hours for the refrigerator to reach
the temperature you have set.
the preset points of 0°F for the freezer and 37°F
for the fresh food compartment.
The Performance Air-Flow System is designed to
maximize temperature control in the fresh food
and freezer compartments. This unique special
feature consists of the Air Tower along the top
and back walls of the fresh food compartment
and the Air Tunnel on the bottom portion of
the freezer rear wall. Placing food in front of
the louvers on these components will not affect
performance.
Although the Air Tower and the Air Tunnel
can be removed, doing so will affect temperature
performance. (For removal instructions, on-line,
24 hours a day, contact us at GEAppliances.com
or call 800.444.1845. In Canada, call us at
1.800.561.3344.)
Performance
Air Flow
System
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Controls
Stainless Steel Refrigerator
TurboCool rapidly cools
the refrigerator compartment in
order to more quickly cool foods.
Once activated, the compressor will turn on
immediately and the fans will cycle on and
off at high speed as needed for 8 hours.
The compressor will continue to run until
the refrigerator compartment cools to
approximately 34°F (1°C), then it will cycle
on and off to maintain this setting. After
8 hours, or if TURBOCOOl is pressed again,
the refrigerator compartment will return
to the original setting.
How
TurboCool™
works
Use TurboCool when adding
a large amount of food to the refrigerator
compartment, putting away foods after they
have been sitting out at room temperature
or when putting away warm leftovers. It can
also be used if the refrigerator has been
without power for an extended period.
1 Press TURBOCOOl. The refrigerator
temperature display will show TC.
NotES:
How to use
TurboCool
• The refrigerator temperature cannot
be changed during turboCool.
2 After TurboCool is complete,
the refrigerator compartment
will return to the original setting.
• The freezer temperature is not affected during
turboCool.
• When opening the refrigerator door during
turboCool, the fans will continue to run if
they have cycled on.
The door alarm will sound
Door Alarm
if either door is open for more than
2 minutes. The beeping sound will
stop when you close the door.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Internal Water Dispenser
Stainless Steel Refrigerator
The water dispenser is located on the left wall
inside the refrigerator compartment.
Internal Water
Dispenser
To dispense water:
1 Hold the glass against the recess.
2 Push the water dispenser button.
3 Hold the glass underneath the dispenser
for 2–3 seconds after releasing the dispenser
button. Water may continue to dispense
after the button is released.
If no water is dispensed when the refrigerator is
first installed, there may be air in the water line
system. Press the dispenser button and run 11⁄2
gallons to remove trapped air from the water line
and to fill the water system. During this process,
the dispenser noise may be loud as the air is
purged from the water line system. To flush out
impurities in the water line, throw away the first
6 glassfuls of water.
NotE: To avoid water deposits, the dispenser
should be cleaned periodically by wiping with
a clean cloth or sponge.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Water Filter
Stainless Steel Refrigerator
5 Run 11⁄2 gallons from the dispenser to clear the
system and prevent sputtering. See To Use the
Dispenser section.
Water Filter Cartridge
Water filter
The water filter cartridge is
located in the back upper
right corner of the
6 Press and hold the RESEt WAtER
FILtER pad for 3 seconds.
refrigerator compartment.
NotE: A newly-installed water
filter cartridge may cause water
to spurt from the dispenser.
When to Replace the Filter
There is a replacement indicator light for the
water filter cartridge on the temperature display.
This light will turn orange to tell you that you
need to replace the filter soon. The filter cartridge
should be replaced when the replacement
indicator light turns red or if the flow of water to
the dispenser or icemaker decreases.
Filter Bypass Plug
You must use the filter bypass plug when
a replacement filter cartridge is not available.
The icemaker will not operate without the filter
or filter bypass plug.
On models with external dispensers, the top of
the LCD screen will display, “Replace Water Filter.”
Replacement Filters:
To order additional filter cartridges
in the United States, visit our Website,
GEAppliances.com, or call GE Parts and
Accessories, 800.626.2002.
Installing the Filter Cartridge
1 If you are replacing the
cartridge, first remove
the old one by slowly turning it
to the left. DO NOT pull down on
the cartridge. A small amount of
water may drip down.
Filter Model MWF
Customers in Canada should consult the yellow
pages for the nearest Mabe Service Center.
CAUtIoN:
If air has been trapped in
the system, the filter cartridge may be ejected as
it is removed. Use caution when removing.
2 Remove the protective foil from the end of the
cartridge.
3 Fill the replacement cartridge with water from the
tap to allow for better flow from the dispenser
immediately after installation.
4 Lining up the arrow on the
cartridge and the cartridge
holder, slowly rotate the
cartridge clockwise until it
stops. When the cartridge is
properly installed, you will feel
it “click” as it locks into place.
Do not overtighten.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Shelves and Bins
Stainless Steel Refrigerator
Shelves in the refrigerator compartment
are adjustable.
Rearranging
the shelves
Refrigerator Compartment
To remove:
2
1
1 Remove all items from the shelf.
2 Tilt the shelf up at the front.
3 Lift the shelf up at the back and bring
the shelf out.
Some models have wire shelves that
can be adjusted in the same manner.
To replace:
1 While tilting the shelf up, insert the top hook
at the back of the shelf in a slot on the track.
1
2
2 Lower the front of the shelf until the bottom
of the shelf locks into place.
The slide-out spillproof shelf allows you to reach
items stored behind others. The special edges
are designed to help prevent spills from dripping
to lower shelves.
3 Lower the shelf into place until it is horizontal
and slide the shelf in.
Slide-out
spillproof
shelf
Make sure that the shelf sits flat after reinstallation
and doesn’t move freely from side to side.
To remove:
Make sure you push the shelves all the way
in before you close the door.
1 Remove all items from shelf.
2 Slide the shelf out until it stops.
3 Lift the front edge of the shelf until the central
tabs are above the front bar.
4 Continue pulling the shelf forward until
it can be removed.
To replace:
1 Place the rear shelf tabs just in front
of the central notches on the shelf frame.
2 Slide the shelf in until the central tabs
are slightly behind the front bar.
This shelf splits in half and slides under itself
for storage of tall items on the shelf below.
™
QuickSpace
shelf
This shelf can be removed and replaced or
relocated just like Slide-Out Spillproof Shelves.
On some models, this shelf can not be used
in the lowest position.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Shelves and Bins
Stainless Steel Refrigerator
To Remove the Full-Width Basket on
Top Freezer Drawer Models:
Basket
removal (top
drawer)
1 Open the top freezer drawer until it stops.
2 The freezer basket rests on the inside tabs
on the drawer slides.
3 Lift the front end of the basket so that the front
two alignment tabs come out of the metal slide
bracket first. Then rotate the front edge of the
basket up while lifting the remaining two rear
alignment tabs out of the metal slide bracket.
4 Make sure the plastic sleeves remain attached
Appearance may vary
to the 4 slots on the metal slide brackets.
When Replacing the Full-Width Basket:
Tilt the basket back and lower it down into
the drawer. Rotate the basket to a horizontal position
and press it down into the 4 alignment tabs.
Tab
NotE: Always be sure that all 4 basket slots
are engaged in the metal slide brackets before sliding
back into the freezer.
The freezer basket has a divider that can be both
repositioned or removed.
Adjustable
divider in
bottom
To Remove the Divider in the Bottom
Freezer Basket:
freezer
basket
Pull the divider forward until the rear locating tabs
are out of the slots. Turn the divider slightly to the
side to release the front locating tabs and lift out.
Tabs
To Reposition the Divider in the Bottom
Freezer Basket:
To Replace the Divider in the Bottom
Freezer Basket:
Turn the divider slightly to one side so the tabs on
the front fit into the vent slots on the basket. Position
the divider so the back locating tabs snap into place
in the back vent slots.
1 Remove the divider as instructed above.
2 Slide the divider left or right to the desired
location and replace as instructed above.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Shelves and Bins
Stainless Steel Refrigerator
To Remove the 2-Piece Basket:
Basket removal
(bottom
drawer)
1 Open the bottom freezer drawer until
it stops.
2 Pull the divider forward until the rear locating tabs
are out of the slots. Turn the divider slightly to the
side to release the front locating tabs and lift out.
3 The freezer basket rests on the metal slide
brackets and is held in place with swing locks.
4 Turn the swing locks from horizontal to vertical
position.
5 Lift the front of the basket up, rotate it toward
you, and bring it straight up to remove.
6 Lift the back portion of the basket up and out
of the drawer.
When Replacing the 2-Piece Basket:
1 Place the rear of the basket onto the metal
slide brackets. There will be 2 pins on each
underside of the back that will align for
securing the basket.
2 Seat the front of the basket onto the metal slide
brackets and over the swing locks.
3 Turn the swing locks from vertical to horizontal
position to lock the basket in place.
Appearance may vary
4 Turn the divider slightly to one side so the tabs
on the front fit into the vent slots on the basket.
Position the divider so the back locating tabs
snap into place in the back vent slots.
Adjustable bins can easily be carried from
refrigerator to work area.
Adjustable
bins on
the door
To remove: Lift bin straight up, then pull out.
To replace or relocate: Slide in the bin just above
the molded door supports, and push down.
The bin will lock in place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door shelf.
Grip the finger hold near the rear of the snugger
and move it to fit your needs.
To remove: Lift the bin straight up, then
pull out.
Non-
Adjustable
bins on
the door
To replace: Engage the bin in the molded
supports on the door and push down. It will lock
in place.
To remove: Lift the rack straight up, then pull out.
Non-
To replace: Engage the rack in the molded
supports on the door and push down. It will lock
in place.
Adjustable
beverage
rack
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Features
Stainless Steel Refrigerator
15"
15"
The doors are factory set for a 150°
door swing. To avoid contact damage
to the refrigerator doors or to adjacent
cabinetry or walls, observe the minimum
clearances shown.
Door swing
clearances
90˚ Door Swing
24-5/8"
150˚ Door Swing
19-1/16"
• Allow 4" clearance on each side
to an adjacent wall for a 90° opening
and access to drawers.
• Allow 15" clearance on each side
to an adjacent wall for removal of drawers.
If the top of the doors are uneven, first try to raise If the doors remain uneven, turn the adjustable
Door
alignment
the lowest door by turning the leveling leg on
the same side as the door until the doors are
even. If the unit rocks, re-adjust the leveling
legs to the extent that the unit is stable.
pin to raise, or lower, the left door to match
the right door. Use a 1/4 Allen wrench
to turn the pin.
Adjustable Pin
Leveling
Leg
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Crispers and Pans
Stainless Steel Refrigerator
Excess water that may accumulate in the bottom
of the drawers should be wiped dry.
Fruit and
vegetable
crispers
Slide the control all the way to the HIGH setting
to provide high humidity recommended for most
vegetables.
Adjustable
humidity
crispers
Slide the control all the way to the lOW setting
to provide lower humidity levels recommended
for most fruits.
The convertible meat pan has its own cold air
duct to allow a stream of cold air from the freezer
compartment to flow to the pan.
Convertible
meat pan
Set the control to Cold to convert the pan
to normal refrigerator temperature and provide
extra vegetable storage space. The cold air duct
is turned off. Variable settings between these
extremes can be selected.
The variable temperature control regulates
the air flow from the Climate Keeper.
Set the control to the coldest setting to store
fresh meats.
To remove:
Deli pan
removal
1 Remove the fruit and vegetable drawers.
2 Pull the drawer out to the stop position.
3 Lift the lid to access the 4 swing locks.
4 Rotate all four swing locks to the unlock
position.
5 Lift the front of the drawer up and out.
To replace:
1 Make sure all four swing locks are in the unlock
position.
2 Place the sides of the drawer into the drawer
supports, making sure the swing locks fit
on the drawer slots.
3 Lock all four swing locks by rotating them
to the lock position.
4 Lower the lid and slide in the drawer.
5 Replace the fruit and vegetable drawers.
Swing Locks –
Unlock Position
Swing Locks –
Lock Position
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic Icemaker
Stainless Steel Refrigerator
NotE: A newly installed refrigerator may take 12 to 24 hours to begin making ice.
Automatic
icemaker
The icemaker will produce seven cubes
per cycle—approximately 100–130 cubes
in a 24-hour period, depending on freezer
compartment temperature, room temperature,
number of door openings and other use
conditions.
Power
Switch
Icemaker
See below for how to access ice and reach
the power switch.
Green
Power Light
Feeler Arm
If the refrigerator is operated before
the water connection is made to the icemaker,
set the power switch in the o (off) position.
When the bin fills to the level of the feeler arm,
the icemaker will stop producing ice. It is normal
for several cubes to be joined together.
When the refrigerator has been connected
to the water supply, set the power switch
to the l (on) position. The icemaker power light
will turn green when the freezer light switch is
pressed in or when the freezer door is closed.
If ice is not used frequently, old ice cubes will
become cloudy, taste stale and shrink.
NotE: In homes with lower-than-average water
pressure, you may hear the icemaker cycle
multiple times when making one batch of ice.
The icemaker will fill with water when it cools to
15°F (–10°C). A newly installed refrigerator may
take 12 to 24 hours to begin making ice cubes.
NotE: Set the power switch to the o (off) position
You will hear a buzzing sound each time
the icemaker fills with water.
if the water supply is shut off.
Throw away the first few batches of ice to allow
the water line to clear.
Be sure nothing interferes with the sweep
of the feeler arm.
To reach the icemaker power switch, open the top
freezer drawer and remove the full-width basket.
Always be sure to replace the basket.
To access ice, open the bottom freezer drawer.
The ice bucket is located below the mullion. Pull it
forward to access ice.
Accessing ice
and reaching
the power
switch
Ice
Bucket
Mullion
To reach the power switch.
To access ice.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and Cleaning
Stainless Steel Refrigerator
The stainless steel panels and handles can be
cleaned with a commercially available stainless
steel cleaner such as Stainless Steel Magic™.
It is also available through GE Parts and
Accessories, 800.626.2002. Order part number
WX10X15.
Cleaning
the outside
Stainless Steel Magic is available at Ace, True
Value, Servistar, HWI and other leading stores.
Do not use appliance wax or polish
on the stainless steel.
To help prevent odors, leave an open box
of baking soda in the fresh food and freezer
compartments.
Use of any cleaning solution other than
that which is recommended, especially those
that contain petroleum distillates, can crack
or damage the interior of the refrigerator.
Cleaning
the inside
Unplug the refrigerator before cleaning.
If this is not practical, wring excess moisture
out of sponge or cloth when cleaning around
switches, lights or controls.
Avoid cleaning cold glass shelves with hot
water because the extreme temperature
difference may cause them to break. Handle
glass shelves carefully. Bumping tempered
glass can cause it to shatter.
Use warm water and baking soda solution—
about a tablespoon (15 ml) of baking soda to
a quart (1 liter) of water. This both cleans and
neutralizes odors. Rinse and wipe dry.
Do not wash any plastic refrigerator parts
in the dishwasher.
Be careful when moving the refrigerator away
from the wall. All types of floor coverings can be
damaged, particularly cushioned coverings and
those with embossed surfaces.
When pushing the refrigerator back, make sure
you don’t roll over the power cord or icemaker
supply line.
Behind the
refrigerator
Pull the refrigerator straight out and return it
to position by pushing it straight in. Moving
the refrigerator in a side direction may result
in damage to the floor covering or refrigerator.
For long vacations or absences, remove food
and unplug the refrigerator. Clean the interior
with a baking soda solution of one tablespoon
(15 ml) of baking soda to one quart (1 liter)
of water. Leave the doors open.
If the temperature can drop below freezing,
have a qualified servicer drain the water supply
system to prevent serious property damage due
to flooding.
Preparing
for vacation
Set the icemaker power switch to the o (off)
position and shut off the water supply to
the refrigerator.
Secure all loose items such as shelves and
drawers by taping them securely in place
to prevent damage.
of the refrigerator.
Preparing
to move
Be sure the refrigerator stays in an upright
position during moving.
When using a hand truck to move the
refrigerator, do not rest the front or back of the
refrigerator against the hand truck. This could
damage
the refrigerator. Handle only from the sides
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Replacing the Light Bulbs
Stainless Steel Refrigerator
Setting the controls to OFF does not remove
power to the light circuit.
Fresh food
compartment—
upper light
1 Unplug the refrigerator.
2 The bulbs are located at the top
of the compartment, inside the light shield.
3 To remove the light shield, pull forward
on the shield to disengage the tabs at the back
of the shield. Pull down to remove the light
shield.
Tabs
4 After replacing the bulbs with appliance
bulbs of the same or lower wattage, replace
the light shield. When replacing the light shield,
set the front tabs into the appropriate slots
in the front of the shield housing and pull
forward to seat the tabs at the back
of the shield into the housing.
5 Plug the refrigerator back in.
Light
Shield
Freezer light
CAUtIoN:
Light bulbs may be hot.
Setting the controls to OFF does not remove
power to the light circuit.
1 Unplug the refrigerator.
2 Remove the freezer basket for access. The bulb is
located at the rear of the freezer inside a light
shield.
3 To remove, grasp the shield at the top and pull out
to release the tabs at the bottom.
Appearance may vary
4 After replacing with an appliance bulb of the
same or lower wattage, replace
the shield and freezer basket.
5 Plug the refrigerator back in.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
The Problem Solver
Stainless Steel Refrigerator
Newer refrigerators sound different from older refrigerators. Modern refrigerators have more
features and use newer technology.
Normal
operating
sounds
Do you hear what I hear? these sounds are normal.
HUMMM...
WHooSH...
• The new high efficiency compressor may run
faster and longer than your old refrigerator
and you may hear a high-pitched hum or
pulsating sound while it is operating.
• You may hear the fans spinning at high
speeds. This happens when the refrigerator
is first plugged in, when the doors are opened
frequently or when a large amount of food
is added to the refrigerator or freezer
compartments. The fans are helping
• Sometimes the refrigerator runs for an
extended period, especially when the doors
are opened frequently. This means that
the Frost Guard™ feature is working
to prevent freezer burn and improve
food preservation.
to maintain the correct temperatures.
• If either door is open for over 3 minutes,
you may hear the fans come on in order
to cool the light bulbs.
• You may hear a whooshing sound when
the doors close. This is due to pressure
equalizing within the refrigerator.
• The fans change speeds in order to provide
optimal cooling and energy savings.
ClICKS, POPS,
CRACKS and CHIRPS
WATER SOUNDS
• You may hear cracking or popping sounds
when the refrigerator is first plugged in.
This happens as the refrigerator cools
to the correct temperature.
• The flow of refrigerant through the freezer
cooling coils may make a gurgling noise like
boiling water.
• Electronic dampers click open and closed to
provide optimal cooling and energy savings.
• Water dropping on the defrost heater can
cause a sizzling, popping or buzzing sound
during the defrost cycle.
• The compressor may cause a clicking or
chirping sound when attempting to restart
(this could take up to 5 minutes).
• A water dripping noise may occur
during the defrost cycle as ice melts from
the evaporator and flows into the drain pan.
• The electronic control board may cause
a clicking sound when relays activate
to control refrigerator components.
• Closing the door may cause a gurgling sound
due to pressure equalization.
• Expansion and contraction of cooling coils
during and after defrost can cause a cracking
or popping sound.
For additional information on normal
icemaker and dispenser operating
sounds, see the Automatic Icemaker
and Internal Water Dispenser
sections.
• After an icemaking cycle, you may hear
the ice cubes dropping into the ice bucket.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
The Problem Solver
Stainless Steel Refrigerator
PROBlEM
POSSIBlE CAUSE
Questions?
Use this
problem
solver!
REFRIGERATOR
DOES NOT OPERATE
• Refrigerator may be in defrost cycle when motor does not operate for
about 30 minutes.
• Either or both controls set to OFF. Set to a temperature setting.
• If interior light is not on, refrigerator may not be plugged in at
wall outlet. Push the plug completely into the wall outlet.
• The fuse is blown/circuit breaker is tripped. Replace fuse or reset
the breaker.
• The refrigerator is in showroom mode. Unplug it and plug it back in.
• Adjust the rollers as shown in the Installation Instructions.
VIBRATION OR
RATTlING (Slight
vibration is normal.)
MOTOR OPERATES
• Normal when refrigerator is first plugged in. Wait 24 hours for
the refrigerator to completely cool down.
FOR lONG PERIODS
OR CYClES ON AND
OFF FREQUENTlY
• Often occurs when large amounts of food are placed in refrigerator.
This is normal.
(Modern refrigerators
with more storage space
and a larger freezer
require more operating
time. They start and stop
often to maintain even
temperatures.)
• Door left open or package holding door open.
• Hot weather or frequent door openings. This is normal.
• Temperature controls set at the coldest setting.
See Temperature Controls.
FRESH FOOD
OR FREEZER
COMPARTMENT
TOO WARM
• Temperature controls not set cold enough.
See Temperature Controls.
• Warm weather or frequent door openings.
• Door left open for long time.
• Package may be holding door open.
FROST OR ICE
CRYSTAlS ON
FROZEN FOOD
(Frost within package
is normal.)
• Door left open or package holding door open.
• Too frequent or too long door openings.
DIVIDER BETWEEN
FRESH FOOD
AND FREEZER
COMPARTMENTS
FEElS WARM
• Automatic energy saver system circulates warm liquid around
the front edge of the freezer compartment to help prevent condensation
from forming on the outside.
AUTOMATIC
• Icemaker power switch is in the o (off) position.
ICEMAKER
DOES NOT WORK
• Water supply turned off or not connected. See Installation Instructions.
• Freezer compartment too warm. Allow 24 hours for the refrigerator
to completely cool down.
• Piled up cubes in storage bin cause icemaker to shut off.
Level cubes in bin.
• Ice cubes stuck in icemaker (green power light on the icemaker
is blinking). Turn off the icemaker, remove cubes and turn the icemaker
back on.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
The Problem Solver
Stainless Steel Refrigerator
PROBlEM
POSSIBlE CAUSE
Questions?
Use this
problem
solver!
FREQUENT
“BUZZING” SOUND
• Icemaker power switch is in the l (on) position, but the water supply
to the refrigerator has not been connected. Set the power switch
to the o (off) position. Keeping it in the l (on) position will damage
the water valve.
ICE CUBES HAVE
ODOR/TASTE
• Old cubes need to be discarded.
• Ice storage bin needs to be emptied and washed.
• Unsealed packages in fresh food and/or freezer compartments may
be transmitting odor/taste to ice cubes.
• Interior of refrigerator needs cleaning. See Care and Cleaning.
• Water filter clogged. Replace the filter or use the filter bypass plug.
SMAll OR
HOllOW CUBES
SlOW ICE CUBE
• Door may have been left open.
FREEZING
• Turn temperature of freezer compartment colder.
See Temperature Controls.
CUBE DISPENSER
DOES NOT WORK
• Icemaker or water supply turned off. Turn on icemaker or water supply.
• Ice cubes are frozen to the icemaker feeler arm. Remove the cubes.
• Irregular clumps in the storage bin. Break up with fingertip pressure
and discard remaining clumps. The freezer may be too warm. Adjust
the freezer temperature control colder one step at a time until clumps
do not form.
WATER HAS POOR
TASTE/ODOR
• Water dispenser has not been used for a long time. Dispense water
until all water in the system has been replenished.
WATER IN FIRST
GlASS IS WARM
• Normal when refrigerator is first installed. Allow 24 hours for
the refrigerator to completely cool down.
• Water dispenser has not been used for a long time. Dispense water
until all water in the system has been replenished.
• Water system has been drained. Allow several hours for the replenished
water supply to chill.
WATER DISPENSER
DOES NOT WORK
• Water supply line turned off or not connected.
See the Installation Instructions.
• Water filter clogged. Replace the filter or use the filter bypass plug.
• Air may be trapped in the system. Press the dispenser arm for
at least 2 minutes.
WATER SPURTING
FROM DISPENSER
• Newly installed filter cartridge. Run 11⁄2 gallons from the dispenser
to clear the system.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
The Problem Solver
Stainless Steel Refrigerator
PROBlEM
POSSIBlE CAUSE
Questions?
Use this
problem
solver!
WATER IS NOT
DISPENSED BUT
ICEMAKER
• Water in reservoir is frozen. Call for service.
• Fresh food control setting is too cold. Set to a warmer setting.
IS WORKING
NO WATER
OR ICE CUBE
PRODUCTION
• Water supply line or shutoff valve is clogged. Call a plumber.
• Replace the filter or use the filter bypass plug.
ORANGE GlOW
• Defrost heater is on. This is normal.
IN FREEZER
REFRIGERATOR
HAS ODOR
• Foods with strong odors should be tightly wrapped.
• Interior needs cleaning. See Care and Cleaning.
• Keep open box of baking soda in refrigerator; replace every 3 months.
DOOR NOT
ClOSING
• Door gasket on hinge side is sticking or folding over. Apply paraffin
wax to the face of the gasket.
PROPERlY
• A door bin is hitting a shelf inside the refrigerator. Move the door
bin up one position.
MOISTURE FORMS
ON OUTSIDE OF
REFRIGERATOR
• Not unusual during periods of high humidity. Wipe surface dry.
• Door left open or package holding door open.
MOISTURE
• Too frequent or too long door openings.
COllECTS INSIDE
• In humid weather, air carries moisture into refrigerator when doors
are opened.
INTERIOR lIGHT
• No power at outlet.
DOES NOT WORK
• Light bulb needs replacing. See Care and Cleaning.
HOT AIR FROM
BOTTOM OF
REFRIGERATOR
• Normal air flow cooling motor. In the refrigeration process, it is
normal that heat be expelled in the area under the refrigerator.
Some floor coverings are sensitive and will discolor at these safe
and normal temperatures.
REFRIGERATOR
NEVER SHUTS OFF
BUT TEMPERATURES
ARE OK
• Adaptive defrost keeps compressor running during door openings.
This is normal. The refrigerator will cycle off after the door remains
closed for two hours.
REFRIGERATOR
BEEPING
• Door is open and door alarm is on.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
The Problem Solver
Stainless Steel Refrigerator
PROBlEM
POSSIBlE CAUSE
Questions?
Use this
problem
solver!
ACTUAl
• Unit just plugged in. Allow 24 hours for the system to stabilize.
• Door open for too long. Allow 24 hours for the system to stabilize.
TEMPERATURE
NOT EQUAl TO
SET TEMPERATURE
• Warm food added to refrigerator. Allow 24 hours for the system
to stabilize.
• Defrost cycle is in process. Allow 24 hours for the system to stabilize.
SElECTTEMP
FEATURE IS
NOT WORKING
• Fresh food compartment temperature control is set at the warmest
setting. This is normal. In order to minimize energy usage,
the SELECTTEMP feature is disabled when the fresh food
compartment temperature control is set at the warmest setting.
DOORS ARE
NOT AlIGNED
• Unlevel floor. Adjust rollers then align doors by adjusting the fresh
food compartment hinge. See Installation Instructions.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Performance Data Sheet
SmartWater Filtration System
MWF Cartridge
this system has been tested according to NSF/ANSI 42/53 for reduction of the substances listed below.
the concentration of the indicated substances in water entering the system was reduced to a concentration
less than or equal to the permissible limit for water leaving the system, as specified in NSF/ANSI 42/53.*
(100% safety factors built in for unmetered usage)
Standard No. 42: Aesthetic Effects
Parameter
USEPA
Influent
Influent
Average
1.96 mg/L
—
Effluent
Average
0.06 mg/L
—
% Reduction
Min. Required
Reduction
MCl
Challenge Concentration
Maximum
0.11 mg/L
—
Average
Minimum
94.74%
—
Chlorine
T & O
Particulate**
—
—
—
2.0 mg/L + 10%
—
≥ 10,000 particles/mL
96.77%
—
> 50%
—
≥ 85%
6,400,000 #/mL
58,833 #/mL
150,000 #/mL
99.14%
97.97%
Standard No. 53: Health Effects
Influent Effluent
Parameter
USEPA
MCl
0.5 NTU
Influent
% Reduction
Average Minimum
Min. Required
Reduction
Challenge Concentration Average
Average
0.14 NTU
Maximum
0.28 NTU
Turbidity
Cysts
Asbestos
Lead at pH 6.5
Lead at pH 8.5
Mercury at pH 6.5
Mercury at pH 8.5
Alachlor
11 + 1 NTU***
Minimum 50,000 L
107 to 108 fibers/L; > 10µm
0.15 mg/L + 10%
0.15 mg/L + 10%
0.006 mg/L + 10%
0.006 mg/L + 10%
0.04 mg/L + 10%
0.002 mg/L + 10%
0.210 mg/L + 10%
0.015 mg/L + 10%
0.015 mg/L + 10%
0.080 mg/L + 10%
0.225 mg/L + 10%
0.009 mg/L + 10%
10.5 NTU
118,750 #/L
57 MF/L
98.54%
> 99.99%
99.60%
99.36%
99.30%
94.70%
93.20%
99.34%
99.00%
98.32%
93.44%
96.51%
98.78%
99.78%
94.22%
97.20%
> 99.99%
99.39%
99.29%
99.29%
87.50%
89.29%
98.67%
98.95%
94.50%
91.67%
95.83%
98.65%
99.77%
93.33%
0.5 NTU
≥ 99.95%
≥ 99%
≥ 99.95% Reduction
≥ 99% Reduction
0.015 mg/L
0.015 mg/L
0.002 mg/L
0.002 mg/L
0.002 mg/L
0.0002 mg/L
0.070 mg/L
0.003 mg/L
0.005 mg/L
0.040 mg/L
0.075 mg/L
0.003 mg/L
< 1 #/L
4 #/L
< 1 MF/L
0.996 MF/L
< 0.001 mg/L
< 0.001 mg/L
0.1567 mg/L
0.1433 mg/L
< 0.001 mg/L
< 0.001 mg/L
0.0007 mg/L
0.0006 mg/L
0.0004 mg/L
0.010 mg/L
0.010 mg/L
0.002 mg/L
0.002 mg/L
0.002 mg/L
0.0002 mg/L
0.070 mg/L
0.003 mg/L
0.005 mg/L
0.04 mg/L
0.075 mg/L
0.003 mg/L
0.0059 mg/L 0.000350 mg/L
0.0057 mg/L 0.000325 mg/L
0.0367 mg/L 0.00023 mg/L
Lindane
2,4-D
0.0020 mg/L <0.00002mg/L <0.00002mg/L
0.2033 mg/L 0.00337 mg/L 0.011000 mg/L
0.0160 mg/L 0.00100 mg/L 0.001000 mg/L
0.0145 mg/L 0.000500 mg/L 0.000500 mg/L
0.0830 mg/L 0.001000 mg/L 0.001000 mg/L
0.2283 mg/L 0.000500 mg/L 0.000500 mg/L
0.0087 mg/L < 0.0005 mg/L < 0.0005 mg/L
Toxaphene
Benzene
Carbofuran
1,4 dichlorobenzene
Atrazine
* Tested using a flow rate of 0.50 gpm; pressure of 60 psig; pH of 7.5 ± 0.5; temp. of 68° ± 5°F (20° ± 3°C)
** Measurement in Particles/ml. Particles used were 0.5-1 microns
*** NTU=Nephelometric Turbidity units
operating Specifications
n
Capacity: certified for up to 300 gallons (1135 l); up to six months for models without a replacement filter indicator light;
up to one year for models with a replacement filter indicator light
Pressure requirement: 40–120 psi (2.8–8.2 bar), non-shock
Temperature: 33–100ºF (0.6–38ºC)
n
n
n
Flow rate: 0.5 gpm (1.9 lpm)
General Installation/operation/Maintenance Requirements
n
n
Run 11⁄2 gallons at full flow to purge out trapped air.
Replace cartridge when the indicator light flashes or water flow rate is reduced on non-indicator units.
Special Notices
n
n
n
Installation instructions, parts and service availability, and standard warranty are included with the product when shipped.
This drinking water system must be maintained according to manufacturer’s instructions, including replacement of filter cartridges.
Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or
after the system. Systems certified for cyst reduction may be used on disinfected water that may contain filterable cysts.
The contaminants or other substances removed or reduced by this water treatment system are not necessarily in your water.
Check for compliance with the state and local laws and regulations.
n
n
n
Note that while the testing was performed under standard laboratory conditions, actual performance may vary. Systems must be
installed and operated in accordance with manufacturer’s recommended procedures and guidelines.
System Tested and Certified by NSF International against ANSI/NSF Standard 42 & 53 for the reduction of:
Standard No. 42: Aesthetic Effects
Standard No. 53: Health Effects
Chemical Unit
Chemical Reduction Unit
Chlorine Taste and Odor
Alachlor and Atrazine Reduction
Benzene and Carbofuran Reduction
1,4 dichlorobenzene and 2,4-D Reduction
Lead and Lindane Reduction
Mechanical Filtration Unit
Particulate Reduction, Class I
NSF
®
Mercury and Toxaphene Reduction
Mechanical Filtration Unit
Turbidity Reduction
Cyst and Asbestos Reduction
Manufactured for: General Electric Company, Louisville, KY 40225
EPA EST. No. 070595-MN-001
25
Download from Www.Somanuals.com. All Manuals Search And Download.
State ofCalifornia
Department of Health Services
Water Treatment Device
Certificate Number
05 - 1698
Date Issued: February 2, 2005
Trademark/Model Designation
Replacement Elements
MWF
MWF
Manufacturer: GeneralElectric Company
The watertreatment device(s) listed on this certi cate have met the testing requirements pursuant to Section
116830 of the Health and Safety Code for the following health related contaminants:
Microbiological Contaminants and Turbidity
Inorganic/Radiological Contaminants
Cysts
Turbidity
Asbestos
Lead
Mercury
Organic Contaminants
Alachlor
Atrazine
Benzene
Carbofuran
Lindane
Mercury
Toxaphene
1,4-dichlorobenzene
2,4-D
Rated Service Capacity: 300 gal
Rated Service Flow: 0.5 gpm
Conditions of Certification:
Do not use where water is microbiologically unsafe or with water ofunknown quality, except that systems certi! ed for
cyst reduction may be used on disinfected waters that may contain ! lterable cysts.
For Purchases Made In Iowa: This form must be signed and dated by the buyer and seller prior to the consummation
of this sale. This form should be retained on file by the seller for a minimum of two years.
BUYER:
SEllER:
Name
Name
Address
City
Address
City
State
Zip
State
Zip
Signature
26
Date
Signature
Date
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Services
Stainless Steel Refrigerator
With the purchase of your new Monogram appliance, receive
the assurance that if you ever need information or assistance
from GE, we’ll be there. All you have to do is call—toll- free!
Whatever your question about any Monogram major appliance, GE Answer Center® information
service is available to help. Your call—and your question—will be answered promptly and
courteously. Call the GE Answer Center® Monday to Friday, 8 a.m. to 10 p.m. EST, and Saturday,
8 a.m. to 7 p.m. EST.
GE Answer
Center®
In the USA:
800.626.2000
OR
Visit our Website at: monogram.com
In Canada, call 1.800.561.3344.
In-Home Repair
Service
In the USA:
800.444.1845
A GE consumer service professional will provide expert repair service, scheduled at a time that’s
convenient for you. To schedule service, call Monday to Friday, 7 a.m. to 10 p.m. EST, or Saturday
and Sunday, 8 a.m. to 6 p.m. EST. Many GE Consumer Service company-operated locations offer
you service today or tomorrow, or at your convenience. Our factory-trained technicians know
your appliance inside and out—so most repairs can be handled in just one visit.
In Canada:
1.800.561.3344
In Canada: Monday to Friday, 7 a.m. to 8 p.m. and Saturday, 8 a.m. to 5 p.m. EDST.
GE offers Braille controls for a variety of GE appliances, and a brochure
to assist in planning a barrier-free kitchen for persons with limited
mobility.
For Customers
With Special
Needs…
Consumers with impaired hearing or speech who have access to a TDD
or a conventional teletypewriter may call 800.TDD.GEAC (800.833.4322)
to request information or service.
In the USA:
800.626.2000
Service
You can have the secure feeling that GE Consumer Service will still be there after your
warranty expires. Purchase a GE contract while your warranty is still in effect and you’ll
receive a substantial discount. With a multiple-year contract, you’re assured of future
service at today’s prices.
Contracts
In the USA:
800.626.2224
In Canada:
1.800.561.3344
Parts and
Accessories
In the USA:
800.626.2002
Individuals qualified to service their own appliances can have parts or accessories sent directly
to their home. The GE parts system provides access to over 47,000 parts…and all GE Genuine
Renewal Parts are fully warranted. VISA, MasterCard and Discover cards are accepted.
User maintenance instructions contained in this manual cover procedures intended to be
performed by any user. Other servicing generally should be referred to qualified service
personnel. Caution must be exercised, since improper servicing may cause unsafe operation.
In Canada:
1.800.561.3344
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Warranty
Stainless Steel Refrigerator
YoUR MoNoGRAM REFRIGERAtoR WARRANtY
Staple sales slip or cancelled check here. Proof of original
purchase date is needed to obtain service under warranty.
lIMITED ONE-YEAR WARRANTY
WHAt IS
CoVERED
For one year from date of original purchase, we will provide, free of charge, parts and service labor in your home
to repair or replace any part of the refrigerator that fails because of a manufacturing defect.
lIMITED FIVE-YEAR WARRANTY
From the Date
of the Original
Purchase
For five years from date of original purchase, we will provide, free of charge, parts and service labor
in your home to repair or replace any part of the sealed refrigerating system (the compressor, condenser,
evaporator and all connecting tubing) that fails because of a manufacturing defect.
lIMITED THIRTY-DAY WARRANTY ON WATER FIlTER CARTRIDGE (Water filter, if included)
From the date of the original purchase we will provide, free of charge, replacement parts for any part
of the water filter cartridge that fails because of a manufacturing defect. During this limited thirty-day
warranty, we will also provide, free of charge, a replacement water filter cartridge.
This warranty is extended to the original purchaser and any succeeding owner for products purchased for
ordinary home use in the 48 mainland states, Hawaii, Washington, D.C. or Canada. If the product is located in an
area where service by a GE Authorized Servicer is not available, you may be responsible for a trip charge or you
may be required to bring the product to an Authorized GE Service location for service. In Alaska the warranty is
the same except that it is LIMITED because you must pay to ship the product to the service shop or for the
service technician’s travel costs to your home.
All warranty service will be provided by our Factory Service Centers or by our authorized Customer Care®
servicers during normal working hours.
Should your appliance need service, during warranty period or beyond, in the USA call 800.444.1845.
In Canada: 800.561.3344. Please have your serial number and model number available when calling for service.
• Service trips to your home to teach you how
to use the product.
• Replacement of house fuses or resetting of circuit
breakers.
• Damage to the product caused by accident, fire,
floods or acts of God.
• Failure of the product if it is used for other than
its intended purpose or used commercially.
• Damage caused after delivery.
• Improper installation, delivery or maintenance.
If you have an installation problem, contact
your dealer or installer. You are responsible for
providing adequate electrical, plumbing and
other connecting facilities.
• Replacement of the light bulbs, if included,
or water filter cartridge, if included, other than
as noted above.
• Replacement of the water filter cartridge,
if included, due to water pressure that is outside
the specified operating range or due to excessive
sediment in the water supply.
• loss of food due to spoilage (in the USA only).
• Incidental or consequential damage caused
by possible defects with this appliance.
WHAt IS Not
CoVERED
• Product not accessible to provide required
service.
EXCLUSIoN oF IMPLIED WARRANtIES—Your sole and exclusive remedy is product repair as provided
in this Limited Warranty. Any implied warranties, including the implied warranties of merchantability
or fitness for a particular purpose, are limited to one year or the shortest period allowed by law.
Some states/provinces do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights, and you
may also have other rights which vary from state to state/province to province. To know what your legal rights
are in your state/province, consult your local or state/provincial consumer affairs office or your state’s Attorney
General.
Warrantor in USA: General Electric Company,
louisville, KY 40225
Warrantor in Canada: Mabe Canada Inc.
225D1804P011
49-60617
04-10 GE
Printed in the United States
Download from Www.Somanuals.com. All Manuals Search And Download.
|
