Safety Instructions . . . . . . . . . . . . .2–5
Owner’s Manual
Operating Instructions
Clock, Timer and
JB910
Control Lockout . . . . . . . . . . . . . . . . .15
Convection Oven . . . . . . . . . . . . .19–23
Roasting Guide . . . . . . . . . . . . . . . .23
Timed Features . . . . . . . . . . . . .21, 22
Cookware . . . . . . . . . . . . . . . . . . . . . . .7
Oven . . . . . . . . . . . . . . . . . . . . . . .11, 12
Broiling Guide . . . . . . . . . . . . . . . . .12
Oven Controls . . . . . . . . . . . . . . . . . .10
Probe . . . . . . . . . . . . . . . . . . . . . . . . . .14
Proofing Feature . . . . . . . . . . . . . . . .24
Sabbath Feature . . . . . . . . . . . . . . . . .30
Self-Cleaning . . . . . . . . . . . . . . . . .25, 26
Special Features . . . . . . . . . . . . . .27–29
Surface Units . . . . . . . . . . . . . . . . . . 6–9
Thermostat Adjustment—
Do It Yourself . . . . . . . . . . . . . . . . . . .16
Timed Baking and
Roasting Features . . . . . . . . . . . . . . . .13
Warming Drawer . . . . . . . . . . . . .17, 18
Warming Feature . . . . . . . . . . . . . . . .24
Care and Cleaning . . . . . . . . . . 31–37
Troubleshooting Tips . . . . . . . . 38–42
Accessories . . . . . . . . . . . . . . . . . . . . 46
Consumer Support
Consumer Support . . . . . . Back Cover
Product Registration . . . . . . . . . . 43, 44
Warranty . . . . . . . . . . . . . . . . . . . . . . 47
Write the model and serial
numbers here:
Model # ______________
Serial # ______________
You can find them on a label
behind the storage drawer
on the range frame.
49-80286-1 05-05 JR
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING!
SAFETY PRECAUTIONS
Do not operate the oven or cooktop controls if the glass is broken. Food splatter or cleaning solution
may penetrate a broken control panel or cooktop and create a risk of electrical shock. Contact a
qualified technician immediately should your glass control panel or cooktop become broken.
I Do not store flammable materials in an oven
or near the cooktop.
I Do not let cooking grease or other flammable
materials accumulate in or near the range.
I Do not touch the surface units, the heating
elements or the interior surface of the oven.
These surfaces may be hot enough to burn
even though they are dark in color. During and
after use, do not touch, or let clothing or other
flammable materials contact the surface units,
areas nearby the surface units or any interior
area of the oven; allow sufficient time for
cooling first.
I
CAUTION:
Items of interest to children
should not be stored in cabinets above a range
or on the back of a range—children climbing
on the range to reach items could be seriously
injured.
I Never wear loose-fitting or hanging garments
while using the appliance. Be careful when
reaching for items stored over the range.
Flammable material could be ignited if
I Potentially hot surfaces include the cooktop,
areas facing the cooktop, oven vent opening,
surfaces near the opening, crevices around the
oven door.
brought in contact with hot surface units or
heating elements and may cause severe burns.
I Use only dry pot holders—moist or damp
pot holders on hot surfaces may result in
burns from steam. Do not let pot holders
touch hot surface units or heating elements.
Do not use a towel or other bulky cloth in
place of pot holders.
I REMEMBER: The inside surface of the oven
may be hot when the door is opened.
I Do not store or use combustible materials,
gasoline or other flammable vapors and liquids
in the vicinity of this or any other appliance.
I Do not use water on grease fires. Never pick
up a flaming pan. Turn the controls off.
Smother a flaming pan on a surface unit
by covering the pan completely with
a well-fitting lid, cookie sheet or flat tray.
Use a multi-purpose dry chemical or
foam-type fire extinguisher.
I Keep the hood and grease filters clean
to maintain good venting and to avoid
grease fires.
I Teach children not to play with the controls
or any other part of the range.
I Always keep dish towels, dish cloths, pot
holders and other linens a safe distance
from your range.
I Flaming grease outside a pan can be put
out by covering it with baking soda or, if
available, by using a multi-purpose dry
chemical or foam-type fire extinguisher.
I Always keep wooden and plastic utensils and
canned food a safe distance from your range.
I Flame in the oven can be smothered
completely by closing the oven door and
turning the oven off or by using a multi-
purpose dry chemical or foam-type fire
extinguisher.
I Always keep combustible wall coverings,
curtains or drapes a safe distance from
your range.
I For your safety, never use your appliance
for warming or heating the room.
COOK MEAT AND POULTRY THOROUGHLY…
Cook meat and poultry thoroughly—meat to at least an INTERNAL temperature of 160°F and poultry to at least
an INTERNAL temperature of 180°F. Cooking to these temperatures usually protects against foodborne illness.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INFORMATION.
READ ALL INSTRUCTIONS BEFORE USING.
RADIANT SURFACE UNITS
Use proper pan size—select cookware having flat bottoms large enough to cover the surface unit
heating element. The use of undersized cookware will expose a portion of the surface unit to direct
contact and may result in ignition of clothing. Proper relationship of cookware to surface unit will
also improve efficiency.
I Never leave the surface units unattended at
high heat settings. Boilovers cause smoking
and greasy spillovers that may catch on fire.
I Large scratches or impacts to glass doors or
cooktops can lead to broken or shattered glass.
I Do not operate the radiant surface units if the
glass is broken. Spillovers or cleaning solution
may penetrate a broken cooktop and create a
risk of electrical shock. Contact a qualified
technician immediately should your glass
cooktop become broken.
I Only certain types of glass, glass ⁄ceramic,
earthenware or other glazed containers are
suitable for cooktop service; others may break
because of the sudden change in temperature.
I To minimize the possibility of burns, ignition
of flammable materials and spillage, the handle I Never use the glass cooktop surface as a
of a container should be turned toward the
center of the range without extending over
nearby surface units.
cutting board.
I Do not place or store items that can melt or
catch fire on the glass cooktop, even when it
is not being used.
I Always turn the surface units off before
removing cookware.
I Be careful when placing spoons or other
stirring utensils on glass cooktop surface when
it is in use. They may become hot and could
cause burns.
I When preparing flaming foods under the
hood, turn the fan on.
I Use care when touching the cooktop.
The glass surface of the cooktop will retain
heat after the controls have been turned off.
I Clean the cooktop with caution. If a wet
sponge or cloth is used to wipe spills on a hot
surface unit, be careful to avoid steam burns.
Some cleaners can produce noxious fumes if
applied to a hot surface.
I Keep an eye on foods being fried at high or
medium high heat settings.
I Foods for frying should be as dry as possible.
Frost on frozen foods or moisture on fresh
foods can cause hot fat to bubble up and
over the sides of the pan.
NOTE: We recommend that you avoid wiping
any surface unit areas until they have cooled
and the indicator light has gone off. Sugar
spills are the exception to this. Please see the
Cleaning the glass cooktop section.
I Use little fat for effective shallow or deep
fat frying. Filling the pan too full of fat can
cause spillovers when food is added.
I When the cooktop is cool, use only the
CERAMA BRYTE® Ceramic Cooktop Cleaner
and the CERAMA BRYTE Ceramic Cooktop
Cleaning Pad to clean the cooktop.
I If a combination of oils or fats will be used
in frying, stir together before heating, or
as fats melt slowly.
I To avoid possible damage to the cooking
surface, do not apply cleaning cream to
the glass surface when it is hot.
I Always heat fat slowly, and watch as it heats.
I Use a deep fat thermometer whenever
possible to prevent overheating fat beyond
the smoking point.
I After cleaning, use a dry cloth or paper towel
to remove all cleaning cream residue.
I Read and follow all instructions and warnings
on the cleaning cream labels.
I Avoid scratching the glass cooktop. The
cooktop can be scratched with items such
as sharp instruments, rings or other jewelry,
and rivets on clothing.
I Do not use plastic wrap to cover food. Plastic
may melt onto the surface and be very difficult
to remove.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING!
OVEN
Stand away from the range when opening the oven door. Hot air or steam which escapes can cause
burns to hands, face and/or eyes.
I Do not heat unopened food containers.
Pressure could build up and the container
could burst, causing an injury.
I Keep the oven vent unobstructed.
I Keep the oven free from grease buildup.
I Place the oven rack in the desired position
while the oven is cool. If racks must be handled
when hot, do not let pot holder contact the
heating elements.
I When using cooking or roasting bags in the
oven, follow the manufacturer’s directions.
I Pulling out the rack to the stop-lock is a
convenience in lifting heavy foods. It is also
a precaution against burns from touching
hot surfaces of the door or oven walls.
I Do not use the oven to dry newspapers.
If overheated, they can catch on fire.
I Do not use the oven for a storage area. Items
stored in an oven can ignite.
I Do not leave paper products, cooking utensils
or food in the oven when not in use.
I Do not use aluminum foil to line oven bottoms,
except as suggested in this manual. Improper
installation of aluminum foil may result in a
risk of electric shock or fire.
SELF-CLEANING OVEN
Do not use oven cleaners. No commercial oven cleaner or oven liner protective coating of any kind
should be used in or around any part of the oven. Residue from oven cleaners will damage the inside
of the oven when the self-clean cycle is used.
I Do not clean the door gasket. The door gasket
is essential for a good seal. Care should be
taken not to rub, damage or move the gasket.
I Gray porcelain-coated oven racks (on some
models) may be cleaned in the oven during
the self-clean cycle.
I Before self-cleaning the oven, remove the
convection roasting rack, broiler pan, grid
and other cookware.
I Shiny, silver-colored oven racks (on some
models) should be removed from the oven
before beginning the self-clean cycle.
I Be sure to wipe up excess spillage before
starting the self-cleaning operation.
I If the self-cleaning mode malfunctions, turn
the oven off and disconnect the power supply.
Have it serviced by a qualified technician.
I Clean only parts listed in this Owner’s Manual.
WARMING DRAWER
I The purpose of the warming drawer is to hold
hot cooked foods at serving temperature.
Always start with hot food; cold food cannot be
heated or cooked in the warming drawer.
I Do not touch the heating element or the interior
surface of the drawer. These surfaces may be
hot enough to burn.
REMEMBER: The inside surface of the drawer
may be hot when the drawer is opened.
I Do not use the drawer to dry newspapers.
If overheated, they can catch on fire.
I Use care when opening the drawer. Open the
drawer a crack and let hot air or steam escape
before removing or replacing food. Hot air or
steam which escapes can cause burns to hands,
face and/or eyes.
I Do not use aluminum foil to line the lower
oven drawer. Foil is an excellent heat insulator
and will trap heat beneath it. This will upset
the performance of the drawer and it could
damage the interior finish.
I Do not leave paper products, plastics, canned
food or combustible materials in the drawer.
I Never leave jars or cans of fat drippings in or
near your drawer.
I Do not warm food in the drawer for more than
two hours.
I Never place, use or self-clean the lower oven
drawer pan in the upper oven.
READ AND FOLLOW THIS SAFETY INFORMATION CAREFULLY.
5
SAVE THESE INSTRUCTIONS
Download from Www.Somanuals.com. All Manuals Search And Download.
About the radiant surface units.
NOTE: Throughout this manual, features and appearance may vary from your model.
About the radiant surface units
The radiant cooktop features heating
SURFACE
COOKING
NOTE: On models with light-colored glass
cooktops, it is normal for the cooking zones to
change color when hot or cooling down. This is
temporary and will disappear as the glass cools
to room temperature.
units beneath a smooth glass surface.
Cooktop temperatures increase with
the number of surface units that are
on. With 3 or 4 units turned on, surface
temperatures are high. Always use
caution when touching the cooktop.
Never cook directly on the glass.
Always use cookware.
It is safe to place hot cookware from the
oven or surface on the glass cooktop
when the surface is cool.
An indicator light will come on when the
surface unit is turned on.
OFF CENTER
Even after the surface units are turned
off, the glass cooktop retains enough
heat to continue cooking. To avoid
overcooking, remove pans from the
surface units when the food is cooked.
Avoid placing anything on the surface
unit until it has cooled completely.
The appropriate HOT SURFACE indicator
light will glow when its corresponding
radiant element is turned on and will
remain on until the surface has cooled
below 150°F.
Always place the pan in the center of
the surface unit you are cooking on.
NOTE:
IWater stains (mineral deposits) are removable
using the cleaning cream or full strength white
vinegar.
DRAGGING
Hot surface indicator light will:
ICome on when the surface unit is
turned on.
IUse of window cleaner may leave an iridescent
film on the cooktop. The cleaning cream will
remove this discoloration.
IStay on even after the unit is turned off.
Do not slide cookware across the
control or cooktop surface because it
can scratch the glass. The glass is
scratch-resistant, not scratchproof.
IGlow brightly until the unit has cooled
below 150°F.
IDon’t store heavy items above the cooktop.
If they drop onto the cooktop, they can cause
damage.
NOTE: A slight odor is normal when a new
cooktop is used for the first time. It is caused by
the heating of new parts and insulating materials
and will disappear in a short time.
IDo not use the surface as a cutting board.
Temperature Limiter
Every radiant surface unit has a
temperature limiter.
The temperature limiter may cycle the
units off for a time if:
The temperature limiter protects the
glass cooktop from getting too hot.
I The pan boils dry.
I The pan bottom is not flat.
I The pan is off center.
I There is no pan on the unit.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
The following information will help you choose cookware which will give good performance on glass cooktops.
Stainless Steel:
recommended
Porcelain Enamel Covered Cast Iron:
recommended
As long as the cookware is covered
completely with porcelain enamel, this
cookware is recommended. Caution is
recommended for cast iron cookware
that is not completely covered with
smooth porcelain enamel, as it may
scratch the glass ceramic cooktop.
Aluminum:
heavy weight recommended
Good conductivity. Aluminum residues
sometimes appear as scratches on the
cooktop, but can be removed if cleaned
immediately. Because of its low melting
point, thin weight aluminum should not
be used.
Check pans for flat bottoms by using
a straight edge.
Glass-ceramic:
usable, but not recommended
Poor performance. May scratch the
surface.
Copper Bottom:
recommended
Copper may leave residues which can
appear as scratches. The residues can
be removed, as long as the cooktop is
Stoneware:
usable, but not recommended
cleaned immediately. However, do not let Poor performance. May scratch the
these pots boil dry. Overheated metal can surface.
bond to glass cooktops. An overheated
copper bottom pot will leave a residue
that will permanently stain the cooktop
if not removed immediately.
Pans with rounded, curved, ridged
or warped bottoms are not
recommended.
Home Canning Tips
Be sure the canner is centered over the
surface unit.
Use recipes and procedures from
reputable sources. These are available
®
from manufacturers such as Ball and
Make sure the canner is flat on the
bottom.
®
Kerr and the Department of Agriculture
Extension Service.
To prevent burns from steam or heat,
use caution when canning.
Flat-bottomed canners are recommended.
Use of water bath canners with rippled
bottoms may extend the time required to
bring the water to a boil.
Wok Cooking
We recommend that you use only a flat-bottomed
wok. They are available at your local retail store.
Do not use woks that have support rings.
Do not use round-bottom woks. You
could be seriously burned if the wok
tipped over.
7
Use only flat-bottomed woks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the surface units.
How to Set
Push the knob in and turn in either
direction to the setting you want.
Hot surface indicator light will:
Icome on when the unit is hot to the touch.
Istay on even after the unit is turned off.
Iglow until the unit is cooled to approximately
150°F.
At both OFF and HI the control
clicks into position. You may hear
slight clicking sounds during cooking,
indicating the control is keeping the
power level you set.
Be sure you turn the control knob to
OFF when you finish cooking.
A HOT SURFACE indicator light, on the
cooktop, will glow when any radiant
element is turned on. It will remain
on until the surface is cooled to
approximately 150°F.
Using the Bridge Burner
To use the bridge burner, turn the
left front control knob to the BRIDGE
BURNER settings.
For full bridge surface unit operation,
also turn on the left rear surface unit.
To use only the front surface unit, turn
the control knob to the FRONT BURNER
settings.
Dual Surface Unit Control Knob
The right front surface unit has 2 cooking sizes
to select from so you can match the size of the
unit to the size of the cookware you are using.
To use the small surface unit, turn
the control knob to the SMALL BURNER
settings.
To use the large surface unit, turn
the control knob to the LARGE BURNER
settings.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Warming Zone
The WARMING ZONE is located in the
back center of the glass surface. Always
start with hot food. Do not use to heat
cold food. Placing uncooked or cold food
on the WARMING ZONE could result in
foodborne illness.
Food Type
Sauces
Soups (cream)
Stews
Vegetables
Hot Beverages
Control Setting
LO
Medium
Medium
Medium
HI
Soups (other than cream)
Breads/Pastries
HI
LO
Push and turn the control knob to any
desired setting.
The chart above shows initial suggested settings only.
The temperature, type and amount of food, type of pan
and the time held will affect the quality of the food.
For best results, all foods on the
WARMING ZONE should be covered with
a lid or aluminum foil.
Always use pot holders or oven mitts
when removing food from the
WARMING ZONE, as cookware will be hot.
CAUTION:
Do not leave food on the
WARMING ZONE for more than 2 hours.
IDo not use plastic wrap to cover food. Plastic
may melt onto the surface and be very difficult
to clean.
A HOT surface indicator light will glow
when the glass surface is hot and will
remain on until the surface is cool
enough to touch. Lower settings may
not heat the glass surface enough to
cause the HOT surface indicator light
to come on.
IUse only cookware recommended for
top-of-range cooking.
A WARMING ZONE indicator light will
glow when the unit is on.
NOTE: The WARMING ZONE will not glow red
like the cooking elements.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven controls.
NOTE: Throughout this manual, features and appearance may vary from your model.
Oven Control, Clock and Timer Features and Settings
BAKE Pad
Touch to select the bake function.
OVEN LIGHT ON/OFF Pad
Touch to turn the oven light on or off.
BROIL HI/LO Pad
DELAY START Pad
Touch to select the broil function.
Use along with COOKING TIME or
SELF CLEAN STD/LO pads to set the oven
to start and stop automatically at a time
you set.
CONVECTION BAKE Pad
Touch to select baking with the convection
function.
COOKING TIME Pad
CONVECTION ROAST Pad
Touch to select roasting with the
convection function.
Touch and then touch the number pads to
set the amount of time you want your food
to cook. The oven will shut off when the
cooking time has run out.
PROOF Pad
Touch to select a warm environment useful
for rising yeast-leavened products.
CLEAR/OFF Pad
Touch to cancel ALL oven operations
except the clock and timer.
START Pad
Must be touched to start any cooking or
cleaning function.
CLOCK Pad
Touch before setting the clock.
Display
Number Pads
Shows the time of day, oven temperature,
whether the oven is in the bake, broil or
self-cleaning mode and the times set for
the timer or automatic oven operations.
Use to set any function requiring numbers
such as the time of day on the clock, the
timer, the oven temperature, the internal
food temperature, the start time and
length of operation for timed baking
and self-cleaning.
If “F– and a number or letter” flash in the display and
the oven control signals, this indicates a function
error code. Touch the CLEAR/OFF pad. Allow the oven to
cool for one hour. Put the oven back into operation. If the
function error code repeats, disconnect the power to the
oven and call for service.
If your oven was set for a timed oven operation
and a power outage occurred, the clock and all
programmed functions must be reset.
KITCHEN TIMER ON/OFF Pad
Touch to select the timer feature.
PROBE Pad
Touch when using the probe to cook food.
WARM Pad
Touch to keep cooked foods warm. See the
How to Set the Oven for Warming section.
The time of day will flash in the display when there
has been a power outage.
WARMING DRAWER ON/OFF Pad
Touch to select the warming drawer
function.
SELF CLEAN STD/LO Pad
Touch to select self-cleaning function. See
the Using the self-cleaning oven section.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven.
To avoid possible burns, place the racks in the desired position before you turn the oven on.
Before you begin…
The racks have stops, so that when placed
correctly on the supports, they will stop
before coming completely out, and will
not tilt.
To replace, place the end of the rack
(stop-locks) on the support, tilt up the
front and push the rack in.
CAUTION:
When you are using a
rack in the lowest position (A), you will need to
use caution when pulling the rack out. We
When placing and removing cookware,
pull the rack out until it stops.
On some models, the bake heating
element is under the oven floor. Do not
place foods on the oven bottom for
cooking.
recommend that you pull the rack out several
inches and then, using two pot holders, pull the
rack out by holding the sides of it. The rack is low
and you could be burned if you place your hand in
the middle of the rack and pull all the way out. Be
very careful not to burn your hand on the door
when using the rack in the lowest position (A).
To remove a rack, pull it toward you,
tilt the front end up and pull it out.
The oven has 6 rack positions.
How to Set the Oven for Baking or Roasting
Check food for doneness at
minimum time on recipe. Cook
longer if necessary.
Touch the BAKE pad.
Touch the number pads to set
the desired temperature.
Touch the CLEAR/OFF pad when
cooking is complete.
Touch the START pad.
NOTE: You will hear the convection fan while
the oven is preheating. The fan will stop
after the oven is preheated and the display
shows your set temperature. This is normal.
Offset rack
Preheating and Pan Placement
Flat rack
Preheat the oven if the recipe calls for it.
Preheating is necessary for good results when
baking cakes, cookies, pastry and breads.
Type of Food
Frozen pies (on cookie sheet)
Angel food cake
Rack Position
D
A
B or C
C or D
Offset rack
Bundt or pound cakes
To preheat, set the oven at the correct
temperature. The control will beep when
the oven is preheated and the display will
show your set temperature. This will take
approximately 10–15 minutes.
Biscuits, muffins, brownies,
cookies, cupcakes,
layer cakes, pies
Casseroles
Turkey on offset rack
C or D
A
Baking results will be better if baking
pans are centered in the oven as much
as possible. If baking with more than one
pan, place the pans so each has at least
1″ to 11⁄2″ of air space around it.
If baking four cake layers at the same time,
place two layers on rack B and two layers on
rack D. Stagger pans on the rack so one is
not directly above the other.
Do not place foods directly on the
oven floor.
Aluminum Foil
You can use aluminum foil to line the
broiler pan and broiler grid. However,
you must mold the foil tightly to the grid
and cut slits in it just like the grid.
Do not use aluminum foil on the bottom of
the oven.
Never entirely cover a rack with
aluminum foil. This will disturb the heat
circulation and result in poor baking.
Cut slits in the foil just like the grid.
Without the slits, the foil will prevent fat
and meat juices from draining into the
broiler pan. The juices could become hot
enough to catch on fire. If you do not cut
the slits, you are essentially frying, not
broiling.
A smaller sheet of foil may be used to
catch a spillover by placing it on a lower
rack several inches below the food.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the oven.
How to Set the Oven for Broiling
Leave the door open to the broil stop position.
The door stays open by itself, yet the proper
temperature is maintained in the oven.
Use LO Broil to cook foods such as
poultry or thick cuts of meat thoroughly
without over-browning them.
Place the meat or fish on the broiler
grid in the broiler pan.
Touch the START pad.
When broiling is finished, touch the
Follow suggested rack positions in
the Broiling Guide.
CLEAR/OFF pad.
NOTE: Broil and self-clean settings will not work
if the temperature probe is plugged in.
If your range is connected to 208 volts,
rare steaks may be broiled by preheating
the broiler and positioning the oven rack
one position higher.
Touch the BROIL HI/LO pad once for
HI Broil.
To change to LO Broil, touch the
BROIL HI/LO pad again.
Broiling Guide
The size, weight, thickness,
starting temperature
and your preference
of doneness will affect
broiling times. This guide
is based on meats at
Quantity and/
or Thickness
Shelf
First Side Second Side
Food
Position Time (min.) Time (min.) Comments
Ground Beef
Well Done
1 lb. (4 patties)
1/2 to 3/4″ thick
E
E
9
11
6
10
Space evenly. Up to 8
patties take about the
same time.
Beef Steaks
Rare†
Medium
Well Done
1″ thick
F
E
E
7
9
11
5
6–7
8–9
Steaks less than 1″
thick cook through
before browning. Pan
frying is recommended.
Slash fat.
refrigerator temperature.
1 to 11⁄2 lbs.
† The U.S. Department of Agriculture
says “Rare beef is popular, but you
should know that cooking it to only
140°F means some food poisoning
organisms may survive.” (Source:
Safe Food Book. Your Kitchen
Rare†
Medium
Well Done
11⁄2″ thick
D
D
D
14
18
22
11
14–16
20
2 to 21⁄2 lbs.
Chicken
1 whole cut up
2 to 21⁄2 lbs.,
split lengthwise
2 Breasts
C
25
10
Broil skin-side-down
first.
Guide. USDA Rev. June 1985.)
C
C
25
10–15
Lobster Tails
2–4
18–20
Do not
turn
over.
Cut through back of
shell. Spread open.
Brush with melted
butter before broiling
and after half of
10 to 12 oz. each
broiling time.
Fish Fillets
1/4 to 1/2″ thick
1/2″ thick
E
6
6
5
6
Handle and turn very
carefully. Brush with
lemon butter before
and during cooking,
if desired.
Increase time 5 to 10
minutes per side for
11⁄2″ thick or home-
cured ham.
Ham Slices
(precooked)
D
Pork Chops
Well Done
2 (1/2″ thick)
2 (1″ thick) about 1 lb.
E
D
10
15
10
15
Slash fat.
Salmon Steaks
2 (1″ thick)
4 (1″ thick) about 1 lb.
D
D
10
12
7–8
10
Grease pan. Brush
steaks with melted
butter.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timed baking and roasting features.
NOTE: Foods that spoil easily—such as milk, eggs, fish, stuffings, poultry and pork—should not be allowed to sit for
more than 1 hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure that
the oven light is off because heat from the bulb will speed harmful bacteria growth.
How to Set an Immediate Start and Automatic Stop
The oven will turn on immediately and cook for
a selected length of time. At the end of the
cooking time the oven will turn off automatically.
The oven will turn ON, and the display will
show the cooking time countdown and the
changing temperature starting at 100°F.
(The temperature display will start to
change once the oven temperature reaches
100°F.) When the oven reaches the
Touch the BAKE pad.
Touch the number pads to set the
desired oven temperature.
temperature you set, 3 beeps will sound.
The oven will continue to cook for
the set amount of time, then turn off
automatically, unless the WARM feature
was set. See the How to Set the Oven for
Warming section.
Touch the COOKING TIME pad.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
Touch the number pads to set the
desired length of cooking time. The
minimum cooking time you can set
is 1 minute.
The oven temperature that you set
and the cooking time that you
entered will be in the display.
Touch the CLEAR/OFF pad to clear
the display if necessary. Remove the
food from the oven. Remember,
even though the oven turns off
automatically, food left in the oven
will continue cooking after the oven
turns off.
Touch the START pad.
NOTE: An attention tone will sound if you are using
timed baking and do not touch the START pad.
How to Set a Delayed Start and Automatic Stop
The oven will turn on at the time of day you set,
cook for a specific length of time and then turn off
automatically.
Make sure the clock shows the correct
time of day.
NOTE: An attention tone will sound if you are using
timed baking and do not touch the START pad.
NOTE: If you would like to check the times
you have set, touch the DELAY START pad to
check the start time you have set or touch the
COOKING TIME pad to check the length
of cooking time you have set.
Touch the BAKE pad.
Touch the number pads to set the
desired oven temperature.
When the oven turns ON at the time
of day you set, the display will show the
cooking time countdown and the
Touch the COOKING TIME pad.
changing temperature starting at 100°F.
(The temperature display will start to
change once the oven temperature
reaches 100°F.) When the oven reaches
the temperature you set, beeps will sound.
The oven will continue to cook for
the set amount of time, then turn off
automatically, unless the WARM feature
was set. See the How to Set the Oven for
Warming section.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
Touch the number pads to set the
desired length of cooking time. The
minimum cooking time you can set
is 1 minute.
The oven temperature that you set
and the cooking time that you
entered will be in the display.
Touch the CLEAR/OFF pad to clear
the display if necessary. Remove the
food from the oven. Remember,
even though the oven turns off
automatically, food left in the oven
will continue cooking after the oven
Touch the DELAY START pad.
Touch the number pads to set the
time of day you want the oven to
turn on and start cooking.
turns off.
Touch the START pad.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the probe.
For many foods, especially roasts and poultry, internal food temperature is the best test for doneness. The
temperature probe takes the guesswork out of roasting by cooking foods to the exact doneness you want.
Use of probes other than the one
provided with this product may result in
Cable
Plug
damage to the probe or oven control.
Use the handles of the probe and plug
when inserting and removing them from
the food and outlet.
Probe
Handles
Read and remove label
I Never leave your probe inside the oven during
a self-cleaning or broil cycle.
I To avoid damaging your probe, do not use
tongs to pull on the cable when removing it.
The temperature probe has a
skewer-like probe at one end and
a plug at the other end that goes
into the outlet in the oven.
I Do not store the probe in the oven.
I To avoid breaking the probe, make sure food
is completely defrosted before inserting.
CAUTION:
To prevent possible burns,
do not unplug the probe from the oven outlet until
the oven has cooled.
After preparing the meat and placing it
on a trivet or on the broiler pan grid,
follow these directions for proper probe
placement.
For roasts with no bone, insert the probe
into the meatiest part of the roast. For
bone-in ham or lamb, insert the probe
into the center of the lowest large muscle.
Insert the probe completely into the
meat. It should not touch bone, fat
or gristle.
Insert the probe into the center of dishes
such as meat loaf or casseroles.
NOTE: Failure to fully insert the probe into the
meat may result in poor cooking performance
because the probe will sense the oven air vs.
the food temperature.
Insert the probe into the meatiest part of
the inner thigh from below and parallel
to the leg of a whole turkey.
NOTE: Self-clean and Broil settings will not work
if the temperature probe is plugged in.
How to Set the Oven For Baking/Roasting When Using the Probe
Insert the probe fully into the food.
After the internal temperature of the
food reaches 100°F, the changing internal
temperature will be shown in the display.
Plug the probe into the outlet in the
oven. Make sure it’s pushed all the
way in. Close the oven door. Make
sure the probe cable is not touching
the broil element.
When the internal temperature of
the food reaches the number you
have set, the probe and the oven
turn off and the oven control signals.
To stop the signal, touch the
Touch the PROBE pad.
CLEAR/OFF pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on it—they
might damage it.
Touch the number pads to set the
desired internal food or meat
temperature. The maximum
internal temperature for the food
that you can set is 200ºF.
IIf the probe is removed from the oven while
probe cooking, the oven will not automatically
turn off.
Touch the BAKE pad.
Touch the number pads to set the
desired oven temperature.
To change the oven temperature during
the Bake/Roast cycle, touch the BAKE
pad and then the number pads to set the
new temperature.
Touch the START pad.
The display will flash if the probe is inserted
into the outlet and you have not set a probe
temperature and touched the START pad.
IYou can use the Kitchen Timer even though
you cannot use timed oven operations while
using the probe.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the clock, kitchen timer and control lockout.
To Set the Clock
The clock must be set to the correct time
of day for the automatic oven timing
functions to work properly. The time of
day cannot be changed during a timed
baking or self-cleaning cycle.
Touch the CLOCK pad.
Touch the number pads.
Touch the START pad.
Make sure the clock is set to the
correct time of day.
To Set the Kitchen Timer
Touch the KITCHEN TIMER
ON/OFF pad.
the display does not change until one minute has
passed. Seconds will not be shown in the display
until the last minute is counting down.
Touch the number pads until the
amount of time you want shows
in the display. For example, to set
2 hours and 45 minutes, touch 2, 4
and 5 in that order. If you make a
mistake touch the KITCHEN TIMER
ON/OFF pad and begin again.
The Kitchen Timer is a minute timer only.
When the Kitchen Timer reaches :00,
the control will beep 3 times followed
by one beep every 6 seconds until
the KITCHEN TIMER ON/OFF pad
is touched.
The Kitchen Timer does not control
oven operations. The maximum
setting on the Kitchen Timer is 9 hours
and 59 minutes.
The 6-second tone can be canceled by following
the steps in the Special features of your oven
control section under Tones at the End of a
Timed Cycle.
Touch the START pad.
After touching the START pad, SET disappears;
this tells you the time is counting down, although
To Reset the Kitchen Timer
If the display is still showing the time
remaining, you may change it by
If the remaining time is not in the display
(clock, delay start or cooking time are in
touching the KITCHEN TIMER ON/OFF pad, the display), recall the remaining time by
then touch the number pads until the
time you want appears in the display.
touching the KITCHEN TIMER ON/OFF pad
and then touching the number pads to
enter the new time you want.
To Cancel the Kitchen Timer
Touch the KITCHEN TIMER ON/OFF
pad twice.
Control Lockout
If the range control is locked and a
cooking pad is touched, the oven display
will show that the control is locked.
Your control will allow you to lock out the touch
pads so they cannot be activated when pressed.
To lock/unlock the touch pad controls:
I On models with CONTROL LOCKOUT,
the oven will be locked out. The knob-
controlled surface units will still be active.
Touch and hold the 9 and 0 pads
at the same time until the control
beeps.
The oven display will show Loc On
for several seconds, then it will go
blank until a cooking pad is touched.
To unlock the control, touch and
hold the 9 and 0 pads at the same
time until the control beeps.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjust the oven thermostat—Do it yourself!
You may find that your new oven cooks differently than the one it replaced. Use your new oven for a few weeks to
become more familiar with it. If you still think your new oven is too hot or too cold, you can adjust the thermostat
yourself.
Do not use thermometers, such as those found in grocery stores, to check the temperature setting of your oven.
These thermometers may vary 20–40 degrees.
NOTE: This adjustment will only affect baking and roasting temperatures; it will not affect broiling, convection or
self-cleaning temperatures. The adjustment will be retained in memory after a power failure.
To Adjust the Thermostat
The oven temperature can be
Touch the BROIL HI/LO and BAKE
pads at the same time until the
display shows SF.
adjusted up to (+) 35ºF hotter or (-)
35ºF cooler. Touch the number pads
the same way you read them. For
example, to change the oven
Touch the BAKE pad. A two digit
number shows in the display.
temperature 15ºF, touch 1 and 5.
Touch BAKE again to alternate
between increasing and decreasing
the oven temperature.
When you have made the
adjustment, touch the START pad to
go back to the time of day display.
Use your oven as you would normally.
The type of margarine will affect baking performance!
Most recipes for baking have been developed using high fat products such as butter or margarine (80% fat). If you
decrease the fat, the recipe may not give the same results as with a higher fat product.
Recipe failure can result if cakes, pies, pastries, cookies or candies are made with low fat spreads. The lower the
fat content of a spread product, the more noticeable these differences become.
Federal standards require products labeled “margarine” to contain at least 80% fat by weight. Low fat spreads, on the
other hand, contain less fat and more water. The high moisture content of these spreads affects the texture and flavor
of baked goods. For best results with your old favorite recipes, use margarine, butter or stick spreads containing at least
70% vegetable oil.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the warming drawer.
The warming drawer will keep hot, cooked foods at serving temperature. Always start with hot food. Do not
use to heat cold food other than crisping crackers, chips or dry cereal.
To Use the Warming Drawer
Touch the WARMING DRAWER pad.
“WARMER ON” and “1” are lit on
the display and “Set” begins to blink.
NOTES:
I The warming drawer has three settings:
1, 2 and 3. These settings maintain different
temperature levels in the warming drawer.
On the number pad, touch 1 for
Low, 2 for Medium or 3 for High.
The display “1” changes
corresponding to the number pad
selected.
I On some models, if using the oven at the same
time as the warming drawer, only the oven
settings will be displayed.
I The warming drawer cannot be used during a
self-cleaning cycle.
The warming drawer starts
automatically after touching 1 , 2 or
3. “WARMER ON” and the number
remain lit. “Set” stops blinking.
To cancel, touch the WARMING DRAWER
pad.
NOTE: Touching the CLEAR/OFF pad does not
turn the warming drawer off.
When Using the Warming Drawer
The warming drawer will keep hot,
cooked foods warm. Always start with hot
food. Do not use to heat cold food other
than crisping crackers, chips or dry
cereal.
I Do not put liquid or water in the
warming drawer.
I All foods placed in the warming
drawer should be covered with a lid or
aluminum foil. When warming pastries
or breads, the cover should be vented
to allow moisture to escape.
Do not line the warming drawer or pan
with aluminum foil. Foil is an excellent heat
insulator and will trap heat beneath it. This
will upset the performance of the drawer
and could damage the interior finish.
I Food should be kept hot in its cooking
container or transferred to a heat-safe
serving dish.
Allow approximately 25 minutes for the
warming drawer to preheat.
CAUTION: Plastic containers or plastic wrap will
melt if in direct contact with the drawer, pan or a
hot utensil. Melted plastic may not be removable
and is not covered under your warranty.
I Remove serving spoons, etc., before
placing containers in warming drawer.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the warming drawer.
Temperature Selection Chart
To keep several different foods hot,
set the control to the food needing the
highest setting.
Food Type
Bacon
Breads
Casserole
Chicken, fried
Ham
Muffins
Pies
Pizza
Potatoes, baked
Tortilla Chips
Control Setting
3
1
2
3
3
1
1
3
3
1
I The temperature, type and amount
of food, and the time held will affect
the quality of the food.
I Repeated opening of the drawer
allows the hot air to escape and the
food to cool.
I With large loads it may be necessary
to use a higher warming drawer setting
and cover some of the cooked food
items.
CAUTION: Do not keep food in the warming
drawer for more than two hours.
I Do not use plastic containers or
plastic wrap.
To Crisp Stale Items
I Place food in low-sided dishes or pans.
I Preheat on 1 setting.
I Check crispness after 45 minutes. Add
time as needed.
To Warm Serving Bowls and Plates
To warm serving bowls and plates, set the
control on 1.
I Use only heat-safe dishes.
I If you want to heat fine china, please
check with the manufacturer of the
dishes for their maximum heat
tolerance.
I You may warm empty serving dishes
while preheating the drawer.
CAUTION: Dishes will be hot. Use pot holders
or mitts when removing hot dishes.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the convection oven.
Convection Fan Operation
In a convection oven, a fan circulates hot air over,
under and around the food.
This circulating hot air is evenly distributed
throughout the oven cavity. As a result, foods are
evenly cooked and browned—often in less time
with convection heat.
NOTE: To maximize cooking evenness,
the fan is designed to rotate in both
directions, with a pause in between.
This is normal.
The convection fan shuts off when the
oven door is opened. DO NOT leave the
door open for long periods of time while
using convection cooking or you may
shorten the life of the convection heating
element.
Introduction
The convection oven comes with two
convection baking modes started by
touching the CONVECTION BAKE MULTI/
1 RACK pad once or twice, depending
on your cooking need:
BAKE MULTI/1 RACK pad once. See the
Multi-Rack Convection Baking section below.
1 RACK—for convection cooking on one
rack only. Touch the CONVECTION BAKE
MULTI/1 RACK pad twice. See the 1-Rack
Convection Baking section below.
MULTI—for convection cooking on more
than one rack. Touch the CONVECTION
Multi-Rack Convection Baking
Flat rack
Because heated air is circulated evenly
throughout the oven, foods can be
baked with excellent results using
multiple racks.
To cook food on more than one rack in
convection bake, use CONVECTION BAKE
MULTI.
When baking on 3 racks, place one offset
rack in the third (C) position, the flat
rack in the fourth (D) position and one
offset rack in the sixth (F) position.
Multi-rack baking may increase cook
times slightly for some foods but the
overall result is time saved. Cookies,
muffins, biscuits and other quickbreads
give very good results with multi-rack
baking.
Offset racks
Multi-rack position.
For two-rack baking, place one offset
rack in the second (B) rack position.
Place the flat rack in the fourth (D)
rack position.
1-Rack Convection Baking
When convection baking with only 1 rack, use
CONVECTION BAKE 1 RACK and follow the
rack positions recommended in the Using the
oven section.
IIdeal for baked foods cooked on 1 rack.
Adapting Recipes…
You can use your favorite recipes in the
convection oven.
I Use pan size recommended.
I Some package instructions for frozen
casseroles or main dishes have been
developed using commercial convection ovens.
For best results in this oven, preheat the oven
and use the temperature on the package.
When convection baking, the Auto
Recipe™ Conversion feature automatically
reduces the set regular baking temperature
by the recommended 25°F. See Auto
Recipe™ Conversion in the Special
Features section.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the convection oven.
Convection Roast
Roasting rack
and grid and the special roasting rack
for best convection roasting results. The
pan is used to catch grease spills and the
grid is used to prevent grease spatters,
while the rack allows the heated air to
circulate under the meat and increase
browning on the underside of the meat
or poultry.
I Place the grid on the broiler pan
and put the roasting rack over them,
making sure the posts on the roasting
rack fit into the holes in broiler pan.
IGood for large tender cuts of meat, uncovered.
The convection fan circulates the heated
air evenly over and around the food.
Meat and poultry are browned on all
sides as if they were cooked on a
rotisserie. Using the roasting rack
provided, heated air will be circulated
over, under and around the food being
roasted. The heated air seals in juices
quickly for a moist and tender product
while, at the same time, creating a rich
golden brown exterior.
Post
Grid
Broiler pan
I Place the meat on the roasting rack.
When you are convection roasting it is
important that you use the broiler pan
How to Set the Oven for Convection Baking or Roasting
Touch the CONVECTION BAKE MULTI/
1 RACK pad once for multi-rack
See Auto Recipe™ Conversion in the Special
Features section.
convection baking. This mode is used
for cooking food items on more than
one rack (i.e., 2, 3 or more racks) at
the same time in convection bake.
See the Multi-Rack Convection Baking
section for more information.
To change the oven temperature, touch
the CONVECTION BAKE MULTI/1 RACK or
CONVECTION ROAST pad and then the
number pads to set the new temperature.
When the oven starts to heat, the
Touch the CONVECTION BAKE MULTI/
1 RACK pad twice for one rack
convection baking. This mode is used
for cooking food items on only one
rack in convection bake.
changing temperature, starting at 100°F,
will be displayed. When oven reaches the
temperature you set, 3 beeps will sound.
Touch CLEAR/OFF pad when finished.
Touch the CONVECTION ROAST pad
IYou will hear a fan while cooking with
convection. The fan will stop when the door
is opened, but the heat will not turn off.
for convection roasting.
Touch the number pads to set the
oven temperature.
IYou may hear the oven clicking during
baking. This is normal.
Touch the START pad.
IIn convection bake modes, for maximum cooking
evenness, the fan is designed to rotate in
both directions, with a pause in between.
This is normal.
NOTE: If the Auto Recipe™ Conversion Feature
is on, it will automatically reduce the set regular
baking temperature by 25°F to the appropriate
convection temperature in convection bake mode.
Cookware for Convection Cooking
When baking cookies, you will get
the best results if you use a flat
cookie sheet instead of a pan with
low sides.
Before using your convection oven, check
that is heat-resistant to temperatures of
to see if your cookware leaves room for air 400°F can also be used.
circulation in the oven. If you are baking
with several pans, leave space between
them. Also, be sure the pans do not touch
each other or the walls of the oven.
Paper and Plastic
Metal and Glass
Any type of cookware will work in your
convection oven. However, metal pans
heat the fastest and are recommended
for convection baking.
IDarkened or matte-finished pans will bake
faster than shiny pans.
IGlass or ceramic pans cook more slowly.
For recipes like oven-baked chicken,
use a pan with low sides. Hot air
cannot circulate well around food
in a pan with high sides.
Heat-resistant paper and plastic
containers that are recommended for
use in regular baking can also be used
for convection baking, but should not
be used at temperatures higher than
the temperature recommended by the
cookware manufacturer. Plastic cookware
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timed features for convection cooking.
You will hear a fan while cooking with these features. The fan will stop when the door is opened, but the heat
will not turn off.
NOTE: Foods that spoil easily—such as milk, eggs, fish, stuffings, poultry and pork—should not be allowed to sit
for more than 1 hour before or after cooking. Room temperature promotes the growth of harmful bacteria. Be sure
that the oven light is off because heat from the bulb will speed harmful bacteria growth.
How to Set an Immediate Start and Automatic Stop
Touch the number pads to set the
desired length of cooking time. The
minimum cooking time you can set
is 1 minute. The oven temperature
that you set and the cooking time that
you entered will be in the display.
The oven will turn on immediately and cook for a
selected length of time. At the end of the cooking
time, the oven will turn off automatically.
Make sure the clock shows the correct
time of day.
Touch the CONVECTION BAKE
Touch the START pad.
MULTI/1 RACK pad once for multi-
rack convection baking. This mode
is used for cooking food items on
more than one rack (i.e., 2, 3 or
more racks) at the same time in
convection bake. See Multi-Rack
Baking section for more information.
The oven will turn ON, and the display will
show the cooking time countdown and the
changing temperature starting at 100°F.
(The temperature display will start to
change once the oven temprature reaches
100°F.) When the oven reaches the
temperature you set, 3 beeps will sound.
Touch the CONVECTION BAKE MULTI/
1 RACK pad twice for one rack
convection baking. This mode is used
for cooking food items on only one
rack in convection bake.
NOTE: If the Auto Recipe™ Conversion Feature
is on, it will automatically reduce the set regular
baking temperature by 25°F to the appropriate
convection temperature in convection bake mode.
See Auto Recipe™ Conversion in the Special
Features section.
Touch the CONVECTION ROAST pad
for convection roasting.
The oven will continue to cook for the set
amount of time, then turn off automatically,
unless the WARM feature was set. See the
How to Set the Oven for Warming section.
T
ouch the number pads to set the
oven temperature.
Touch the COOKING TIME pad.
After the oven turns off, the end-of-cycle
tone will sound.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
Touch the CLEAR/OFF pad to clear
the display if necessary. Remove
the food from the oven. Remember,
even though the oven turns off
automatically, food left in the oven
will continue cooking after the oven
turns off.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the timed features for convection cooking.
How to Set a Delayed Start and Automatic Stop
The oven will turn on at the time of day you set,
cook for a specific length of time and then turn off
automatically.
Touch the DELAY START pad.
Touch the number pads to set the
time of day you want the oven to turn
on and start cooking.
Make sure the clock shows the correct
time of day.
Touch the START pad.
Touch the CONVECTION BAKE
MULTI/1 RACK pad once for multi-
rack convection baking. This mode
is used for cooking food items on
more than one rack (i.e., 2, 3 or
more racks) at the same time in
convection bake. See Multi-Rack
Baking section for more information.
NOTE: An attention tone will sound if you are
using timed baking or roasting and do not touch
the START pad.
NOTE: If you would like to check the times you have
set, touch the DELAY START pad to check the start
time you have set, or touch the COOKING TIME
pad to check the length of cooking time you have set.
Touch the CONVECTION BAKE MULTI/
1 RACK pad twice for one rack
convection baking. This mode is used
for cooking food items on only one
rack in convection bake.
When the oven turns ON at the time of day
you set, the display will show the cooking
time countdown and the changing
temperature starting at 100°F. (The
temperature display will start to change
once the oven temperature reaches 100°F.)
When the oven reaches the temperature
you set, 3 beeps will sound.
Touch the CONVECTION ROAST pad
for convection roasting.
Touch the number pads to set the
oven temperature.
NOTE: If the Auto Recipe™ Conversion Feature
is on, it will automatically reduce the set regular
baking temperature by 25°F to the appropriate
convection temperature in convection bake mode.
See Auto Recipe™ Conversion in the Special
Features section.
Touch the COOKING TIME pad.
NOTE: If your recipe requires preheating, you may
need to add additional time to the length of the
cooking time.
The oven will continue to cook for the
programmed amount of time, then shut
off automatically, unless the WARM feature
was set. See the How to Set the Oven for
Warming section.
Touch the number pads to set the
desired length of cooking time. The
minimum cooking time you can set
is 1 minute.
The oven temperature that you set
and the cooking time that you entered
will be in the display.
After the oven turns off, the end-of-cycle
tone will sound.
Touch the CLEAR/OFF pad to clear
the display if necessary. Remove
the food from the oven. Remember,
even though the oven shuts off
automatically, food left in the oven
will continue cooking after the oven
turns off.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the convection oven.
How to Set the Oven for Convection Roasting when Using the Probe
Place the oven rack in the position
When the internal temperature of
the meat reaches the number you
have set, the probe and the oven
turn off and the oven control signals.
To stop the signal, touch the
that centers the food between the
top and bottom of the oven. Insert
the probe into the meat. Make sure
it is pushed all the way in.
For best results when roasting large
turkeys and roasts, we recommend
using the probe included in the
convection oven.
CLEAR/OFF pad. Use hot pads to
remove the probe from the food.
Do not use tongs to pull on it—
they might damage it.
Plug the probe into the outlet in the
oven. Make sure it is pushed all the
way in. Close the oven door.
Touch the PROBE pad.
NOTE: If the probe is removed from the
oven while probe cooking, the oven will not
automatically turn off.
Touch the number pads to set the
desired internal meat temperature.
NOTE: The maximum internal temperature
CAUTION:
To prevent possible burns,
do not unplug the probe from the oven outlet until
the oven has cooled.
for the food that you can set is 200°F.
Touch the CONVECTION ROAST pad.
Touch the number pads to set the
desired oven temperature.
NOTE:
IYou will hear a fan while cooking with this
feature. The fan will stop when the door is
opened, but the heat will not turn off.
The display will flash PROBE and the oven
control will signal if the probe is inserted
into the outlet, and you have not set a
probe temperature and pressed the
START pad.
IYou can use the Kitchen Timer even though you
cannot use timed oven operations.
I Never leave your probe inside the oven during
a self-cleaning cycle.
Touch the START pad.
When the oven starts to heat, the word
LO will be in the display.
To change the oven temperature
during the Convection Roast cycle,
touch the CONVECTION ROAST pad
and then touch the number pads to
set the new desired temperature.
I Do not store the probe in the oven.
I Probe not for use in Broil or Self-Clean functions.
After the internal temperature of the meat
reaches 100°F, the changing internal
temperature will be shown in the display.
Convection Roasting Guide
Meats
Minutes/Lb. Oven Temp. Internal Temp.
Beef
Rib, Boneless Rib,
Top Sirloin
(3 to 5 lbs.)
Rare
Medium
Well
20–24
24–28
28–32
325°F
325°F
325°F
140°F†
160°F
170°F
Beef Tenderloin
Rare
Medium
10–14
14–18
325°F
325°F
140°F†
160°F
Pork
Bone-In, Boneless (3 to 5 lbs.)
23–27
325°F
170°F
Chops (1/2 to 1″ thick)
2 chops
4 chops
6 chops
30–35 total
35–40 total
40–45 total
325°F
325°F
325°F
170°F
170°F
170°F
Ham
Canned, Butt, Shank (3 to 5 lbs. fully cooked)
14–18
325°F
140°F
Lamb
Bone-In, Boneless (3 to 5 lbs.)
Medium
Well
17–20
20–24
325°F
325°F
160°F
170°F
Seafood
Poultry
Fish, Whole (3 to 5 lbs.)
30–40 total
400°F
Lobster Tails (6 to 8 oz. each)
Whole Chicken (21⁄2 to 31⁄2 lbs.)
20–25 total
24–26
50–55 total
55–60 total
350°F
350°F
350°F
350°F
* Stuffed birds generally require 30–45
minutes additional roasting time.
Shield legs and breast with foil to
prevent overbrowning and drying
of skin.
† The U.S. Department of Agriculture says
“Rare beef is popular, but you should
know that cooking it to only 140°F
means some food poisoning organisms
may survive.” (Source: Safe Food Book.
Your Kitchen Guide. USDA Rev. June
1985.)
180°–185°F
180°–185°F
180°–185°F
Cornish Hens, Unstuffed (1 to 11⁄2 lbs.)
Stuffed (1 to 11⁄2 lbs.)
Duckling (4 to 5 lbs.)
24–26
325°F
180°–185°F
Turkey, Whole*
Unstuffed (10 to 16 lbs.)
Unstuffed (18 to 24 lbs.)
8–11
7–10
325°F
325°F
180°–185°F
180°–185°F
Turkey Breast (4 to 6 lbs.)
16–19
325°F
170°F
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the proofing and warming features.
The proofing feature maintains a warm environment useful for rising yeast-leavened products.
How to Set the Oven For Proofing
Place the covered dough in a dish in
the oven on shelf B or C.
When proofing is finished, touch
the CLEAR/OFF pad.
NOTE: For best results, cover the dough with a
cloth or with greased plastic wrap (the plastic
may need to be anchored underneath the
container so the oven fan will not blow it off).
ITo avoid lowering the oven temperature and
lengthening proofing time, do not open the
oven door unnecessarily.
ICheck bread products early to avoid
Touch the PROOF pad and then the
START pad.
over-proofing.
NOTE:
The display will read PrF (proof).
IDo not use the proofing mode for warming
food or keeping food hot. The proofing oven
temperature is not hot enough to hold foods
at safe temperatures. Use the WARM feature
to keep food warm.
The oven interior light turns on and
remains on during proofing.
The proofing feature automatically
provides the optimum temperature for
the proofing process, and therefore does
not have a temperature adjustment.
IProofing will not operate when oven is above
125°F. “HOT” will show in the display.
Set the KITCHEN TIMER ON/OFF for
the minimum proof time.
How to Set the Oven For Warming
The WARM feature keeps cooked
foods hot.
ILeave them uncovered.
ICheck crispness after 20–30 minutes.
This feature is not designed to reheat
cold food.
Add time as needed.
IMPORTANT NOTES:
To use the WARM feature, touch the
WARM pad and then the START pad.
IFood should be kept hot in its cooking container
or transferred to a heat-safe serving dish.
To use the WARM feature after Timed
Baking or Roasting, follow these steps:
IFor moist foods, cover them with an oven-safe
lid or aluminum foil.
Touch the mode of cooking that
you want to use (BAKE, CONVECTION
BAKE MULTI, CONVECTION BAKE
1 RACK or CONVECTION ROAST).
IFried or crisp foods do not need to be covered,
but can become too dry if warmed for too long.
IRepeated opening of the door allows the hot
air to escape and the food to cool.
Touch the number pads to set the
oven temperature.
IAllow extra time for the temperature inside the
oven to stabilize after adding items.
Touch the COOKING TIME pad.
IWith large loads it may be necessary to cover
some of the cooked food items.
Touch the number pads to set the
desired length of cooking time.
IRemove serving spoons, etc., before placing
containers in the oven.
Touch the WARM pad.
Touch the START pad.
IDo not use plastic containers, lids or
plastic wrap.
To Crisp Stale Items
IPlace food in low-sided dishes or pans.
CAUTION:
Plastic containers, lids or
plastic wrap will melt if placed in the oven.
Melted plastic may not be removable and is not
covered under your warranty.
IFor best results, place the food items in
a single layer. Do not stack.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the self-cleaning oven.
The oven door must be closed and all controls set correctly for the cycle to work properly.
Before a Clean Cycle
We recommend venting your kitchen
with an open window or using a
ventilation fan or hood during the
first self-clean cycle.
Soil on the front frame of the range and
outside the gasket on the door will need
to be cleaned by hand. Clean these areas
with hot water, soap-filled steel-wool pads
or cleansers such as Soft Scrub®. Rinse
well with clean water and dry.
Remove the convection roasting rack,
broiler pan, broiler grid, probe,
all cookware and any aluminum foil
from the oven.
Do not clean the gasket. The fiberglass
material of the oven door gasket cannot
withstand abrasion. It is essential for the
gasket to remain intact. If you notice it
becoming worn or frayed, replace it.
Wipe up heavy soil on the oven
bottom.
NOTE:
I If your oven is equipped with shiny,
silver-colored oven racks, remove them
before you begin the self-clean cycle.
Wipe up any heavy spillovers on the
oven bottom.
I If your oven is equipped with gray
porcelain-coated oven racks, they
may be left in the oven during the
self-clean cycle.
Make sure the oven light bulb cover is
in place and the oven light is off.
IMPORTANT: The health of some birds
is extremely sensitive to the fumes given
off during the self-cleaning cycle of any
range. Move birds to another well-
ventilated room.
The shiny, silver-colored oven racks
(on some models) and the convection
roasting rack can be self-cleaned, but they
will darken, lose their luster and become
hard to slide.
How to Set the Oven for Cleaning
The door locks automatically. The display
will show the clean time remaining. It will
not be possible to open the oven door
until the temperature drops below the
lock temperature and the LOCKED light
goes off.
Touch the SELF CLEAN STD/LO pad
once for a 4-hour clean time or
twice for a 3-hour clean time.
A 3-hour self-clean time is
recommended for use when
cleaning small, contained spills.
A self-clean time of 4 hours or
longer is recommended for
a dirtier oven.
When the LOCKED light goes off, you will
be able to open the door.
I The word LOCKED will flash and the
word door will display if you set the
clean cycle and forget to close the
oven door.
If a time other than 4 hours or
3 hours is needed, use the number
pads and enter the desired
clean time.
I To stop a clean cycle, touch the
CLEAR/OFF pad. When the LOCKED light
goes off indicating the oven has cooled
below the locking temperature, you
will be able to open the door.
You can change the clean time to any
time between 21⁄2 hours and 5 hours,
depending on how dirty your oven is.
Touch the START pad.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the self-cleaning oven.
The oven door must be closed and all controls set correctly for the cycle to work properly.
How to Delay the Start of Cleaning
Touch the SELF CLEAN STD/LO pad
once for a 4-hour clean time or
twice for a 3-hour clean time.
Touch the DELAY START pad.
Using the number pads, enter the
time of day you want the clean cycle
to start.
A 3-hour self-clean time is
recommended for use when
cleaning small, contained spills.
A self-clean time of 4 hours or
longer is recommended for
a dirtier oven.
Touch the START pad.
The door locks automatically. The display
will show the start time. It will not be
possible to open the oven door until
the temperature drops below the lock
temperature and the LOCKED light
goes off.
If a time other than 4 hours or
3 hours is needed, use the number
pads and enter the desired
clean time.
When the LOCKED light goes off, you
will be able to open the door.
You can change the clean time to any
time between 21⁄2 hours and 5 hours,
depending on how dirty your oven is.
After a Clean Cycle
You may notice some white ash in the
oven. Wipe it up with a damp cloth after
the oven cools.
I You cannot set the oven for cooking or
another self-clean cycle until the oven
is cool enough for the door to unlock.
If white spots remain, remove them with a soap-
filled steel wool pad and rinse thoroughly with
a vinegar and water mixture.
I While the oven is self-cleaning, you can
touch the CLOCK pad to display the
time of day. To return to the clean
countdown, touch the SELF CLEAN
STD/LO pad.
These deposits are usually a salt residue
that cannot be removed by the clean
cycle.
I If the racks become hard to slide, apply
a small amount of cooking oil to a
paper towel and wipe the edges of the
oven racks with the paper towel.
If the oven is not clean after one clean
cycle, repeat the cycle.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features of your oven control.
Your new touch pad control has additional features that you may choose to use. The following are the features
and how you may activate them.
The special feature modes can only be activated while the display is showing the time of day. They remain
in the control’s memory until the steps are repeated.
When the display shows your choice, touch the START pad. The special features will remain in memory after
a power failure, except for the Sabbath feature, which will have to be reset.
12-Hour Shutdown
+
With this feature, should you forget and leave the
oven on, the control will automatically turn off the
oven after 12 hours during baking functions or
after 3 hours during a broil function.
Touch the DELAY START pad until
no shdn (no shut-off) appears in the
display.
Touch the START pad to activate the
no shut-off and leave the control
set in this special features mode.
If you wish to turn OFF this feature, follow
the steps below.
Touch the BROIL HI/LO and BAKE
pads at the same time until the
display shows SF.
Fahrenheit or Celsius Temperature Selection
Your oven control is set to use the Fahrenheit
temperature selections, but you may change this
to use the Celsius selections.
Touch the COOKING TIME and BROIL
HI/LO pads at the same time. The
display will show F (Fahrenheit).
Touch the BROIL HI/LO and BAKE
pads at the same time until the
display shows SF.
Touch the COOKING TIME and BROIL
HI/LO pads again at the same time.
The display will show C (Celsius).
Touch the START pad.
Tones at the End of a Timed Cycle
+
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds
until the CLEAR/OFF pad is touched. This
continual 6-second beep may be canceled.
Touch the KITCHEN TIMER ON/OFF
pad. The display shows CON BEEP
(continuous beep). Touch the
KITCHEN TIMER ON/OFF pad again.
The display shows BEEP. (This cancels
the one beep every 6 seconds.)
To cancel the 6-second beep:
Touch the BROIL HI/LO and BAKE
pads at the same time until the
display shows SF.
Touch the START pad.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Special features of your oven control.
Tone Volume
+
This feature allows you to adjust the tone volumes
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 1 BEEP.
This is the quietest volume level.
to a more acceptable volume. There are three
possible volume levels.
Touch the BROIL HI/LO and BAKE
pads at the same time until the
display shows SF.
For each time the level is changed,
a tone will sound to provide an
indication of the volume level.
Touch the OVEN LIGHT ON/OFF pad.
The display will show 2 BEEP. This is
the middle volume level.
Choose the desired sound level
(1 BEEP, 2 BEEP, 3 BEEP).
Touch the START pad to activate
the level shown.
Touch the OVEN LIGHT ON/OFF pad
again. The display will show 3 BEEP.
This is the loudest volume level.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
+
Touch the CLOCK pad again to change
to the 24 hour military time clock. The
display will show 24 hr. If this is the choice
you want, touch the START pad.
If you would prefer to have a 24-hour
military time clock or black out the clock
display, follow the steps below.
Touch the CLOCK pad again to black out
the clock display. The display will show
OFF. If this is the choice you want, touch
the START pad.
Touch the BROIL HI/LO and BAKE
pads at the same time until the
display shows SF.
Touch the CLOCK pad once. The
display will show 12 hr. If this is
the choice you want, touch the
START pad.
NOTE: If the clock is in the black-out mode you
will not be able to use the Delay Start function.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Recipe™ Conversion
When using convection bake, the Auto Recipe™
Conversion feature will automatically convert
entered regular baking temperatures to
convection baking temperatures.
To deactivate the feature:
Press the BAKE and BROIL HI/LO pads
at the same time until the display
shows SF.
This feature is activated so that the display will
show the actual converted (reduced) temperature.
For example, if you enter a regular recipe
temperature of 350°F and press the START pad,
the display will show CON and the converted
temperature of 325°F.
Press the CONVECTION BAKE
MULTI/1 RACK pad. The display will
show CON ON. Press the
CONVECTION BAKE MULTI/1 RACK
pad again. The display will show
CON OFF.
Press the START pad.
To reactivate the feature, repeat steps
1–3 above but press the START pad when
CON ON is in the display.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sabbath feature.
(Designed for use on the Jewish Sabbath and Holidays)
The Sabbath feature can be used for baking/roasting only. It cannot be used for convection, broiling, self-cleaning or
Delay Start cooking.
NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed. The bulb may be
removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on.
How to Set for Regular Baking/Roasting
Using the number pads, enter the
desired temperature between 170°F and
550°F. No signal or temperature will be
given.
Make sure the clock shows the correct time of day and
the oven is off.
Touch and hold both the BROIL HI/LO and
BAKE pads, at the same time, until the
display shows SF.
Touch the START pad.
NOTE: If bake or broil appears in the
display, the BROIL HI/LO and BAKE pads
were not touched at the same time.
Touch the CLEAR/OFF pad and begin
again.
After a random delay period of
approximately 30 seconds to 1 minute,
⊃
⊃
will appear in the display
indicatingthat the oven is baking/
⊃
roasting. If ⊃ doesn’t appear in the
display, start again at Step 4.
Tap the DELAY START pad until SAb bAtH
appears in the display.
When the display shows ⊃ the
To adjust the oven temperature, touch the
BAKE pad, enter the new temperature using
the number pads and touch the START pad.
oven is set in Sabbath. When the
Touch the START pad and ⊃ will appear
in the display.
⊃
display shows ⊃
the oven is
baking/roasting.
NOTE: The CLEAR/OFF and COOKING TIME pads
are active during the Sabbath feature.
Touch the BAKE pad. No signal will
be given.
How to Set for Timed Baking/Roasting—Immediate Start and Automatic Stop
Make sure the clock shows the correct time of day and
the oven is off.
Touch the START pad.
Touch and hold both the BROIL HI/LO and
BAKE pads, at the same time, until the
display shows SF.
Touch the BAKE pad. No signal will be
given.
Using the number pads, enter the
desired temperature. No signal or
temperature will be given.
NOTE: If bake or broil appears in the
display, the BROIL HI/LO and BAKE pads
were not touched at the same time.
Touch the CLEAR/OFF pad and begin
again.
Touch the START pad.
After a random delay period of
Tap the DELAY START pad until SAb bAtH
approximately 30 seconds to 1 minute,
appears in the display.
⊃
⊃
will appear in the display indicating
⊃
that the oven is baking/roasting. If ⊃
Touch the START pad and ⊃ will appear
in the display.
When the display shows ⊃ the
doesn’t appear in the display, start again
at Step 7.
oven is set in Sabbath. When the
Touch the COOKING TIME pad.
⊃
display shows ⊃
the oven is
To adjust the oven temperature, touch the
BAKE pad, enter the new temperature using
the number pads and touch the START pad.
baking/roasting.
Touch the number pads to set the
desired length of cooking time between
1 minute and 9 hours and 99 minutes.
The cooking time that you entered will
be displayed.
When cooking is finished, the display will
⊃
change from ⊃ to ⊃ and 0:00 will appear,
indicating that the oven has turned OFF but is
still set in Sabbath. Remove the cooked food.
How to Exit the Sabbath Feature
Touch the CLEAR/OFF pad.
Choose 12 shdn, indicating that the oven
will automatically turn off after 12 hours
or no shdn, indicating that the oven will
not automatically turn off after 12 hours.
If the oven is cooking, wait for a random
delay period of approximately 30
seconds to 1 minute, until only ⊃
is in the display.
+
Press START when the option that you
want is in the display (12 shdn or no shdn).
Touch and hold both the BROIL HI/LO
and BAKE pads, at the same time, until
the display shows SF.
NOTE: If a power outage occurred while
the oven was in Sabbath, the oven will
automatically turn off and stay off even
when the power returns. The oven
control must be reset.
Tap the DELAY START pad until 12 shdn
or no shdn appears in the display.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning of the range.
Be sure all controls are off and all surfaces are cool before cleaning any part of the range.
If your range is removed for cleaning, servicing or any reason, be sure the anti-tip
device is re-engaged properly when the range is replaced. Failure to take this
precaution could result in tipping of the range and cause injury.
How to Remove Protective Shipping Film and Packaging Tape
Carefully grasp a corner of the protective
To assure no damage is done to the
shipping film with your fingers and slowly finish of the product, the safest way to
peel it from the appliance surface. Do not remove the adhesive from packaging tape
use any sharp items to remove the film.
Remove all of the film before using the
appliance for the first time.
on new appliances is an application of a
household liquid dishwashing detergent.
Apply with a soft cloth and allow to soak.
NOTE: The adhesive must be removed from all
parts. It cannot be removed if it is baked on.
Control Knobs
The knobs can be cleaned in a
The control knobs may be removed for easier
cleaning.
dishwasher or they may also be washed
with soap and water. Make sure the inside
of the knobs are dry before replacing.
Make sure the knobs are in the OFF
positions and pull them straight off the
stems for cleaning.
Replace the knobs in the OFF position to
ensure proper placement.
Oven Vent
It is normal for steam to come out of
the vent.
The oven vent is located above the right rear
surface unit.
The vent is important for proper air circulation.
Never block this vent.
This area could become hot during
oven use.
Control Panel
You may also use a glass cleaner.
If desired, the touch pads may be deactivated
before cleaning.
Remove heavier soil with warm soapy
water. Do not use abrasives of any kind.
See the Control Lockout information in the
Using the clock, kitchen timer and control
lockout section in this manual.
Reactivate the touch pads after cleaning.
Clean up splatters with a damp cloth.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning of the range.
Cleaning the Oven Door
To clean the inside of the door:
To clean the outside of the door:
I Because the area inside the gasket is
cleaned during the self-clean cycle,
you do not need to clean this by hand.
I Use soap and water to thoroughly
clean the top, sides and front of the
oven door. Rinse well. You may also
use a glass cleaner to clean the glass
on the outside of the door. Do not let
water drip into the vent openings.
I The area outside the gasket and
the door liner can be cleaned with
a soap-filled steel wool or plastic pad,
hot water and detergent. Rinse well
with a vinegar and water solution.
The gasket is designed with a gap at the
bottom to allow for proper air circulation.
Do not rub or clean the door gasket—
it has an extremely low resistance to
abrasion.
I If any stain on the door vent trim is
persistent, use a soft abrasive cleaner
and a sponge-scrubber for best results.
If you notice the gasket becoming worn,
frayed or damaged in any way or if it
has become displaced on the door,
you should have it replaced.
I Spillage of marinades, fruit juices,
tomato sauces and basting materials
containing acids may cause
discoloration and should be wiped
up immediately. When surface is
cool, clean and rinse.
I Do not use oven cleaners, cleaning
powders or harsh abrasives on the
outside of the door.
Lift-Off Oven Door
Bottom
With the
The door is very heavy. Be careful when
removing and lifting the door.
Hinge arm
edge
door at the
of slot
same angle as
the removal
Do not lift the door by the handle.
To remove the door:
position, seat the
indentation of
the hinge arm
into the bottom
edge of the hinge slot. The notch in
the hinge arm must be fully seated
into the bottom of the slot.
Indentation
Slot
Fully open the door.
Pull the hinge locks down toward
the door frame, to the unlocked
position. A tool, such as a small
flat-blade screwdriver, may be
required.
Hinge
lock
Fully open the door. If the door will
not fully open, the indentation is not
seated correctly in the bottom edge
of the slot.
Pull hinge locks down to unlock.
Firmly grasp both sides of the door
at the top.
Close door to the door removal
position, which is halfway between
the broil stop position and fully
closed.
Push the hinge locks up against the
front frame of the oven cavity to the
locked position.
Lift door up and out until the hinge
arm is clear of the slot.
Removal position
Hinge
lock
To replace the door:
Hinge
arm
Firmly grasp both sides of the door
at the top.
Push hinge locks up to lock.
Close the oven door.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Removable Warming Drawer Pan
I Never place, use or self-clean the
warming drawer pan in the upper oven.
NOTE: For models with an electric warming
drawer or lower oven drawer, before performing
any adjustments, cleaning or service, disconnect
the range electrical power supply at the
household distribution panel by removing the
fuse or switching off the circuit breaker. Make
sure the drawer heating element is cool.
I Warming drawer has a removable pan
for easy cleaning. Clean with hot soapy
water and a sponge or dish towel. Dry
with a clean cloth. Replace the pan in
the warming drawer.
NOTE: Allow warming drawer to cool before
removing pan.
NOTE: Wipe spills promptly after each use.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Care and cleaning of the range.
Oven Light Replacement
Replace bulb with a 40-watt
appliance bulb.
CAUTION: Before replacing your oven light bulb,
disconnect the electrical power to the range at the
main fuse or circuit breaker panel.
To replace the cover:
Be sure to let the light cover and bulb
cool completely.
Place it into groove of the light
receptacle. Pull wire forward to the
center of the cover until it snaps
into place.
To remove the cover:
Wire cover holder.
Hold a hand under the cover so it
doesn’t fall when released. With
fingers of the same hand, firmly
push back the wire cover holder.
Lift off the cover.
Connect electrical power to the
range.
Do not remove any screws to remove
the cover.
Broiler Pan and Grid
If food has burned on, sprinkle the grid
with detergent while hot and cover with
wet paper towels or a dishcloth. Soaking
the pan will remove burned-on foods.
Do not clean the broiler pan or grid in a self-
cleaning oven.
After broiling, remove the broiler pan
from the oven. Remove the grid from
the pan. Carefully pour out the grease
from the pan into a proper container.
Do not store a soiled broiler pan and
grid anywhere in the range.
Both the broiler pan and grid may be cleaned with
a commercial oven cleaner.
Both the broiler pan and grid can also be
cleaned in a dishwasher.
Wash and rinse the broiler pan and grid in hot
water with a soap-filled or plastic scouring pad.
Oven Heating Elements
Do not clean the broil element. Any soil
will burn off when the element is heated.
Clean the oven floor with warm, soapy
water.
On some models, the bake element is not
exposed and is under the oven floor. If spillovers,
residue or ash accumulate on the oven floor,
wipe up before self-cleaning.
Wipe up heavy soil on the oven
bottom.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Roasting rack
Flat rack
Oven Racks and Convection Roasting Rack
The convection roasting rack should be
removed from the oven before beginning
the self-clean cycle. Clean with an abrasive
cleanser or steel wool. After cleaning,
rinse the rack with clean water and
dry with a clean cloth.
NOTE: The shiny, silver-colored oven racks (on
some models) and the convection roasting rack
may be cleaned in the self-cleaning oven.
However, the racks will darken in color, lose their
luster and become hard to slide if cleaned during
the self-cleaning cycle.
Offset racks
If your oven is equipped with shiny,
silver-colored oven racks, they should be
removed from the oven before beginning
the self-clean cycle. Clean with an abrasive
cleanser or steel wool. After cleaning,
rinse the racks with clean water and dry
with a clean cloth.
To make the racks slide more easily,
apply a small amount of vegetable oil
to a paper towel and wipe the edges
of the oven racks with the paper towel.
Do not spray with Pam® or other
lubricant sprays.
If your oven is equipped with gray
porcelain-coated oven racks, they
may be cleaned in the oven during
the self-clean cycle.
Stainless Steel Surfaces
Do not use a steel-wool pad; it will
scratch the surface.
To Order
To order Stainless Steel Appliance
Cleaner, please call our toll-free number:
Shake bottle well.
Place a small amount of Stainless
Steel Appliance Cleaner on a damp
cloth or damp paper towel.
National Parts Center
800.626.2002
Stainless Steel Appliance
Cleaner . . . . . . . . . . . . . . . . . . . .# PM10X311
Clean a small area (approximately
8″ x 8″), rubbing with the grain of
the stainless steel if applicable.
Dry and buff with a clean, dry paper
towel or soft cloth.
Repeat as necessary.
NOTE: If a mineral oil-based stainless steel
appliance cleaner has been used before
to clean the appliance, wash the surface
with dishwashing liquid and water prior
to using the Stainless Steel Appliance
Cleaner. After washing the surface with
dishwashing liquid and water, use a
generous amount of Stainless Steel
Appliance Cleaner to clean the appliance.
Painted Surfaces
Painted surfaces include the door,
top of the control panel and the drawer
front. Clean these with soap and water
or a vinegar and water solution.
Do not use commercial oven cleaners,
cleaning powders, steel wool or harsh
abrasives on any painted surface.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the glass cooktop.
Normal Daily Use Cleaning
ONLY use CERAMA BRYTE® Ceramic
Cooktop Cleaner on the glass cooktop.
Other creams may not be as effective.
Shake the cleaning cream well.
Apply a few drops of CERAMA
BRYTE® Ceramic Cooktop Cleaner
directly to the cooktop.
To maintain and protect the surface of
your glass cooktop, follow these steps:
Use a paper towel or CERAMA
BRYTE® Cleaning Pad for Ceramic
Cooktops to clean the entire
cooktop surface.
Before using the cooktop for the
first time, clean it with CERAMA
BRYTE® Ceramic Cooktop Cleaner.
This helps protect the top and
makes cleanup easier.
Use a dry cloth or paper towel
to remove all cleaning residue.
No need to rinse.
Clean your cooktop after
each spill. Use CERAMA
BRYTE® Ceramic Cooktop
Cleaner.
Daily use of CERAMA BRYTE®
Ceramic Cooktop Cleaner will help
keep the cooktop looking new.
NOTE: It is very important that you DO NOT heat
the cooktop until it has been cleaned thoroughly.
Burned-On Residue
If any residue remains, repeat the
steps listed above as needed.
WARNING: DAMAGE to your glass surface may
occur if you use scrub pads other than those
recommended.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE® Ceramic Cooktop Cleaner
and a paper towel.
Allow the cooktop to cool.
Use a CERAMA BRYTE® Cleaning
Pad for Ceramic Cooktops.
Spread a few drops of CERAMA
BRYTE® Ceramic Cooktop Cleaner
on the entire burned residue area.
Using the included CERAMA
BRYTE® Cleaning Pad for Ceramic
Cooktops, rub the residue area,
applying pressure as needed.
Heavy, Burned-On Residue
Allow the cooktop to cool.
For additional protection, after all
residue has been removed, polish
the entire surface with CERAMA
BRYTE® Ceramic Cooktop Cleaner
and a paper towel.
Use a single-edge razor blade scraper
at approximately a 45° angle against
the glass surface and scrape the soil.
It will be necessary to apply pressure
to the razor scraper in order to
remove the residue.
The CERAMA BRYTE® Ceramic
Cooktop Scraper and all
recommended supplies are
available through our Parts Center.
See instructions under “To Order
Parts” section on next page.
After scraping with the razor scraper,
spread a few drops of CERAMA
BRYTE® Ceramic Cooktop Cleaner
on the entire burned residue area.
Use the CERAMA BRYTE® Cleaning
Pad to remove any remaining
residue.
NOTE: Do not use a dull or nicked
blade.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Metal Marks and Scratches
Be careful not to slide pots and pans
across your cooktop. It will leave
metal markings on the cooktop
surface.
If pots with a thin overlay of
aluminum or copper are allowed
to boil dry, the overlay may leave
black discoloration on the cooktop.
These marks are removable using
the CERAMA BRYTE® Ceramic
Cooktop Cleaner with the CERAMA
BRYTE® Cleaning Pad for Ceramic
Cooktops.
This should be removed
immediately before heating again
or the discoloration may be
permanent.
WARNING:
Carefully check the
bottom of pans for roughness that would scratch
the cooktop.
Rubber-like Seal
To clean the rubber-like seal at the outer
edge of the glass, wipe it with cooktop
cream when needed.
Glass surface—potential for permanent damage.
Sugary spillovers (such as
Damage from Sugary Spills and Melted Plastic
jellies, fudge, candy, syrups)
or melted plastics can cause
pitting of the surface of your
cooktop (not covered by the
warranty) unless the spill is
removed while still hot.
Special care should be taken
when removing hot
Turn off all surface units. Remove
hot pans.
Any remaining spillover should be
left until the surface of the cooktop
has cooled.
Wearing an oven mitt:
Don’t use the surface units again
until all of the residue has been
completely removed.
a. Use a single-edge razor blade
scraper (CERAMA BRYTE®
Ceramic Cooktop Scraper) to
move the spill to a cool area on
the cooktop.
NOTE: If pitting or indentation in the glass
surface has already occurred, the cooktop glass
will have to be replaced. In this case, service will
be necessary.
substances.
Be sure to use a new, sharp
razor scraper.
b. Remove the spill with paper
towels.
Do not use a dull or nicked
blade.
To Order Parts
To order CERAMA BRYTE® Ceramic
Cooktop Cleaner and the cooktop
scraper, please call our toll-free number:
CERAMA BRYTE® Cleaning Pads for
Ceramic Cooktops . . . . . . . . .# WX10X350
National Parts Center
800.626.2002
®
CERAMA BRYTE Ceramic
Cooktop Cleaner . . . . . . . . . . .# WX10X300
CERAMA BRYTE® Ceramic
Cooktop Scraper . . . . . . . . . . .# WX10X0302
Kit . . . . . . . . . . . . . . . . . . . . . . . .# WB64X5027
(Kit includes cream and cooktop scraper)
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you call for service…
Troubleshooting Tips
Save time and money! Review the charts on the following
pages first and you may not need to call for service.
Problem
Possible Causes
What To Do
Surface units will not
maintain a rolling boil
or cooking is not
fast enough
Improper cookware
being used.
• Use pans which are flat and match the diameter of
the surface unit selected.
In some areas, the power
(voltage) may be low.
• Cover pan with a lid until desired heat is obtained.
• Replace the fuse or reset the circuit breaker.
Surface units do
not work properly
A fuse in your home may be
blown or the circuit breaker
tripped.
Cooktop controls
improperly set.
• Check to see the correct control is set for the surface
unit you are using.
Surface unit stops
glowing when turned
to a lower setting
This is normal. The unit
is still on and hot.
Scratches (may appear
as cracks) on cooktop
glass surface
Incorrect cleaning
• Scratches are not removable. Tiny scratches will become
methods being used.
less visible in time as a result of cleaning.
Cookware with rough bottoms • To avoid scratches, use the recommended cleaning
being used or coarse particles
(salt or sand) were between
the cookware and the surface
of the cooktop.
procedures. Make sure bottoms of cookware are clean
before use, and use cookware with smooth bottoms.
Cookware has been slid
across the cooktop surface.
Areas of discoloration
on the cooktop
Food spillovers not cleaned
before next use.
• See the Cleaning the glass cooktop section.
Hot surface on a model
with a light-colored cooktop.
• This is normal. The surface may appear discolored
when it is hot. This is temporary and will disappear
as the glass cools.
Plastic melted to
the surface
Hot cooktop came into
contact with plastic placed
on the hot cooktop.
• See the Glass surface—potential for permanent damage
section in the Cleaning the glass cooktop section.
Pitting (or indentation)
of the cooktop
Hot sugar mixture spilled
on the cooktop.
• Call a qualified technician for replacement.
• Use only flat cookware to minimize cycling.
Frequent cycling
off and on of
surface units
Improper cookware
being used.
Oven light does
not work
Light bulb is loose.
• Tighten or replace the bulb.
Oven will not work
Plug on range is not completely • Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet.
grounded outlet.
A fuse in your home may be
blown or the circuit
breaker tripped.
• Replace the fuse or reset the circuit breaker.
Oven controls improperly set. • See the Using the oven section.
38
Oven too hot.
• Allow the oven to cool to below locking temperature.
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Causes
What To Do
Food does not bake
or roast properly
Oven controls improperly set. • See the Using the oven section.
Rack position is incorrect
or the rack is not level.
• See the Using the oven section.
Incorrect cookware or
cookware of improper
size being used.
• See the Using the oven section.
Oven thermostat needs
adjustment.
• See the Adjust the oven thermostat—Do it yourself!
section.
Food does not
broil properly
Oven controls improperly set. • Make sure you touch the BROIL HI/LO pad.
Improper rack position
being used.
• See the Broiling Guide.
Cookware not suited
for broiling.
• Use the broiling pan and grid that came with your range.
The probe is plugged into the • Unplug and remove the probe from the oven.
outlet in the oven.
(on some models)
Aluminum foil used on the
the broiling pan and grid has
not been fitted properly and
slit as recommended.
• See the Using the oven section.
In some areas the power
(voltage) may be low.
• Preheat the broil element for 10 minutes.
• Broil for the longest period of time recommended in
the Broiling Guide.
Oven temperature
too hot or too cold
Oven thermostat
needs adjustment.
• See the Adjust the oven thermostat—Do it yourself!
section.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you call for service…
Troubleshooting Tips
Problem
Possible Causes
What To Do
Clock and timer do
not work
Plug on range is not completely • Make sure electrical plug is plugged into a live, properly
inserted in the electrical outlet.
grounded outlet.
A fuse in your home
may be blown or the
circuit breaker tripped.
• Replace the fuse or reset the circuit breaker.
Oven controls improperly set. • See the Using the clock and timer section.
Oven will not self-clean
The oven temperature is
too high to set a self-clean
operation.
• Allow the range to cool and reset the controls.
Oven controls improperly set. • See the Using the self-cleaning oven section.
The probe is plugged into
the outlet in the oven.
(on some models)
• Remove the probe from the oven.
“Crackling” or
“popping” sound
This is the sound of the
metal heating and cooling
during both the cooking and
cleaning functions.
• This is normal.
Excessive smoking
during a clean cycle
Excessive soil.
• Touch the CLEAR/OFF pad. Open the windows to
rid the room of smoke. Wait until the LOCKED light
goes off. Wipe up the excess soil and reset the clean
cycle.
Oven door will not
open after a clean cycle
Oven too hot.
• Allow the oven to cool below locking temperature.
Oven not clean after a
clean cycle
Oven controls not properly set. • See the Using the self-cleaning oven section.
Oven was heavily soiled.
• Clean up heavy spillovers before starting the clean
cycle. Heavily soiled ovens may need to self-clean
again or for a longer period of time.
“LOCKED” flashes
in the display
The self-clean cycle has been • Close the oven door.
selected but the door is not
closed.
“LOCKED” light is
on when you want
to cook
The oven door is locked
because the temperature
inside the oven has not
dropped below the
• Touch the CLEAR/OFF pad. Allow the oven to cool.
locking temperature.
“F—and a number
or letter” flash
in the display
You have a function error code. • Disconnect all power to the range for at least 30
seconds and then reconnect power. If the function
error code repeats, call for service.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
Possible Causes
What To Do
Loc On appears in the
oven display or LC
in the surface display
The controls have
been locked.
• See the Control lockout section to unlock.
Control signals after
entering cooking time
or start time
You forgot to enter a
bake temperature or
cleaning time.
• Touch the BAKE pad and desired temperature or
the SELF CLEAN STD/LO pad and desired clean time.
Display goes blank
A fuse in your home may be
blown or the circuit
breaker tripped.
• Replace the fuse or reset the circuit breaker.
The clock is in the
black-out mode.
• See the Special features of your oven control section.
• Reset the clock.
Display flashes
Power failure.
Unable to get the
display to show “SF”
Oven control pads were
not touched properly.
• The BROIL HI/LO and BAKE pads must be touched at
the same time and held for 3 seconds.
“Probe” appears in
the display
(on some models)
This is reminding you to
enter a probe temperature
after plugging in the probe.
• Enter a probe temperature.
Power outage,
clock flashes
Power outage or surge.
• Reset the clock. If the oven was in use, you must reset
it by touching the CLEAR/OFF pad, setting the clock
and resetting any cooking function.
Steam from the vent
When using the convection
feature, it is normal to see
steam coming out of the oven
vent. As the number of racks
or amount of food being
• This is normal.
cooked increases, the amount
of visible steam will increase.
“Burning” or “oily”
odor emitting from
the vent
This is normal in a new oven • To speed the process, set a self-clean cycle for a
and will disappear in time.
minimum of 3 hours. See the Using the self-cleaning
oven section.
Strong odor
An odor from the insulation • This is temporary.
around the inside of the oven
is normal for the first few times
the oven is used.
Fan noise
A convection fan may
automatically turn on
and off.
• This is normal. To maximize cooking evenness,
the fan is designed to operate in both directions,
with a pause in between.
Oven racks are
difficult to slide
The shiny, silver-colored
racks were cleaned in a
self-clean cycle.
• Apply a small amount of vegetable oil to a paper
towel and wipe the edges of the oven racks with
the paper towel. Do not spray with Pam® or other
lubricant sprays.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Before you call for service…
Troubleshooting Tips
Problem
Possible Causes
What To Do
Drawer does not slide
smoothly or drags
The drawer is out
of alignment.
• Fully extend the drawer and push it all the way in.
See the Care and cleaning of the range section.
Drawer is over-loaded or
load is unbalanced.
• Reduce weight. Redistribute drawer contents.
Warming drawer will
not work
A fuse in your home may be • Replace the fuse or reset the circuit breaker.
blown or the circuit breaker
tripped.
Controls improperly set.
• See the Warming drawer section.
Excessive condensation Liquid in drawer.
• Remove liquid.
in the drawer
Uncovered foods.
• Cover food with lid or aluminum foil.
Temperature setting too high. • Reduce temperature setting.
Food dries out in the
warming drawer
Moisture escaping.
• Cover food with lid or aluminum foil.
• Push drawer in until latch engages.
Drawer not fully closed.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
™
GE Service Protection Plus
GE, a name recognized worldwide for quality and dependability, offers you
™
Service Protection Plus —comprehensive protection on all your appliances—
No Matter What Brand!
Benefits Include:
• Backed by GE
• All brands covered
• Unlimited service calls
• All parts and labor costs included
• No out-of-pocket expenses
• No hidden deductibles
• One 800 number to call
We’ll Cover Any Appliance.
Anywhere. Anytime.*
You will be completely satisfied with our service protection or you may request your money back
on the remaining value of your contract. No questions asked. It’s that simple.
Protect your refrigerator, dishwasher, washer and dryer, range, TV, VCR and much more—any brand!
Plus there’s no extra charge for emergency service and low monthly financing is available. Even icemaker
coverage and food spoilage protection is offered. You can rest easy, knowing that all your valuable
household products are protected against expensive repairs.
Place your confidence in GE and call us in the U.S. toll-free at 800.626.2224
for more information.
*All brands covered, up to 20 years old, in the continental U.S.
Cut here
✁
Please place in envelope and mail to:
General Electric Company
Warranty Registration Department
P.O. Box 32150
Louisville, KY 40232-2150
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Product Ownership Registration
Dear Customer:
Thank you for purchasing our product and thank you for placing your confidence in us.
We are proud to have you as a customer!
Follow these three steps to protect your new appliance investment:
Complete and mail
your Consumer
After mailing the
registration below,
store this document
in a safe place. It
contains information
you will need should
you require service.
Our service number is
Read your Owner’s
Manual carefully.
It will help you
operate your new
appliance properly.
Product Ownership
Registration today.
Have the peace of
mind of knowing we
can contact you in
the unlikely event of
safety modification.
a
1
800.GE.CARES
2 3
(800.432.2737).
Model Number
Serial Number
Important: If you did not get a registration card with your
product, detach and return the form below to
ensure that your product is registered, or register
Cut here
✁
Consumer Product Ownership Registration
Model Number
Serial Number
Mr. I Ms. I
Mrs. I
Miss I
First
Name
Last
Name
Street
Address
Apt. #
City
E-mail Address*
Zip
Code
State
Date Placed
In Use
Month
Phone
Number
_
_
Day
Year
* Please provide your e-mail address to receive, via e-mail, discounts, special offers and other important
communications from GE Appliances (GEA).
I Check here if you do not want to receive communications from GEA’s carefully selected partners.
FAILURE TO COMPLETE AND RETURN THIS CARD DOES NOT DIMINISH YOUR
WARRANTY RIGHTS.
GE Appliances
GE Consumer & Industrial
Louisville, Kentucky
on “Privacy Policy” or call 800.626.2224.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories.
Looking For Something More?
call 800.626.2002 (during normal business hours). Have your model number ready.
Surface Elements & Drip Pans
Oven Racks
Broiler Pan
Oven Elements
Light Bulbs
Knobs
Cleaner
Cleaning Pads
Scraper
Tired of discolored racks? Wishing you had extra-heavy-duty oven racks?
NOW AVAILABLE for your range:
GE’s innovative, self-cleanable porcelain-coated oven racks!
• Heavy Duty
• Durable
• Able to be cleaned in a self-cleaning oven
46
Download from Www.Somanuals.com. All Manuals Search And Download.
GE Electric Range Warranty.
All warranty service provided by our Factory Service Centers, or
Staple your receipt here.
Proof of the original purchase
date is needed to obtain service
under the warranty.
®
an authorized Customer Care technician. To schedule service,
call 800.GE.CARES (800.432.2737).
For The Period Of: GE Will Provide:
One Year
From the date of the
original purchase
Any part of the range which fails due to a defect in materials or workmanship. During this
full one-year warranty, GE will also provide, free of charge, all labor and in-home service to
replace the defective part.
Five Years
From the date of the
original purchase
A replacement glass cooktop if it should crack due to thermal shock, discolor, crack at the
rubber seal between the glass cooktop and the porcelain edge, or if the pattern wears off.
A replacement radiant surface unit if it should burn out.
During this limited additional four-year warranty, you will be responsible for any labor or
in-home service.
What GE Will Not Cover:
IService trips to your home to teach you how to use
the product.
IReplacement of house fuses or resetting of circuit
breakers.
IImproper installation, delivery or maintenance.
IDamage to the product caused by accident, fire, floods
or acts of God.
IFailure of the product if it is abused, misused,
or used for other than the intended purpose or
used commercially.
IIncidental or consequential damage caused by possible
defects with this appliance.
IDamage to the glass cooktop caused by use of cleaners
other than the recommended cleaning creams and
pads.
IDamage caused after delivery.
IDamage to the glass cooktop caused by hardened
spills of sugary materials or melted plastic that
are not cleaned according to the directions in
the Owner’s Manual.
This warranty is extended to the original purchaser and any succeeding owner for products purchased for
home use within the USA. In Alaska, the warranty excludes the cost of shipping or service calls to your home.
Some states do not allow the exclusion or limitation of incidental or consequential damages. This warranty
gives you specific legal rights, and you may also have other rights which vary from state to state. To know
what your legal rights are, consult your local or state consumer affairs office or your state’s Attorney General.
Warrantor: General Electric Company. Louisville, KY 40225
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Consumer Support
GE Appliances Website
Have a question or need assistance with your appliance? Try the GE Appliances Website 24 hours a day,
any day of the year! For greater convenience and faster service, you can now download Owner’s Manuals,
order parts, catalogs, or even schedule service on-line. You can also “Ask Our Team of Experts™”
your questions, and so much more...
Schedule Service
Expert GE repair service is only one step away from your door. Get on-line and schedule your service at
your convenience 24 hours any day of the year! Or call 800.GE.CARES (800.432.2737) during normal
business hours.
Real Life Design Studio
GE supports the Universal Design concept—products, services and environments that can be used by
people of all ages, sizes and capabilities. We recognize the need to design for a wide range of physical and
mental abilities and impairments. For details of GE’s Universal Design applications, including kitchen
design ideas for people with disabilities, check out our Website today. For the hearing impaired, please call
800.TDD.GEAC (800.833.4322).
Extended Warranties
Purchase a GE extended warranty and learn about special discounts that are available while your warranty
is still in effect. You can purchase it on-line anytime, or call 800.626.2224 during normal business hours.
GE Consumer Home Services will still be there after your warranty expires.
Parts and Accessories
Individuals qualified to service their own appliances can have parts or accessories sent directly to their
homes (VISA, MasterCard and Discover cards are accepted). Order on-line today, 24 hours every day or
by phone at 800.626.2002 during normal business hours.
Instructions contained in this manual cover procedures to be performed by any user. Other servicing generally
should be referred to qualified service personnel. Caution must be exercised, since improper servicing may cause
unsafe operation.
Contact Us
If you are not satisfied with the service you receive from GE, contact us on our Website with all the details
including your phone number, or write to: General Manager, Customer Relations
GE Appliances, Appliance Park
Louisville, KY 40225
Register Your Appliance
Register your new appliance on-line—at your convenience! Timely product registration will allow for
enhanced communication and prompt service under the terms of your warranty, should the need arise.
You may also mail in the preprinted registration card included in the packing material.
Printed in the United States
Download from Www.Somanuals.com. All Manuals Search And Download.
|