JB968SL
GE Profile™ 30" Free-Standing Double Oven Range
Dimensions and Installation Information (in inches)
30
25
KW Rating
2-1/2
14.2
10.7
240V
208V
2-1/2
Acceptable electrical
outlet area
Breaker Size
40 Amps†
†
Note: Check local codes for required breaker size.
Effective January 1, 1996, the National Electrical Code requires
that new construction (not existing) utilize a 4-conductor
connection to an electric range.
7
14-1/2
Receptacle Locations: Locally approved flexible service cord
or conduit must be used because terminals are not accessible
after range installation. See shaded area in drawing for location
of electrical outlet box. Recommended outlet locations allow
range to be installed directly against wall.
A*
7-1/2
B*
On models with baking or warming
drawers, electrical outlet must not
be in this area.
Note: 30" ranges conform to U.L. requirements for 0" spacing
from adjacent walls below countertops. To reduce possibility
of scorching walls, engineering recommends a minimum of
1-1/2" spacing to allow for possible extended, high-heat,
no-load heating element operation.
*Dimension from wall to front of closed
oven door handle is 27-3/8 on models
JB968/910/900 and 27-3/4 on models
JBP89/84/81.
25-3/8*
47-5/8
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
*A is 29-7/8 on models JB968/910/900
and JBP89/84/81
*B is 46-7/8 on models JBP89/84/81
and 46-1/2 on models JB968/910/900
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
Listed by
Underwriters
Laboratories
Specification Created 4/06
221097
Download from Www.Somanuals.com. All Manuals Search And Download.
|