SCB2001K
GE Profile Advantium® Wall Oven
Dimensions and Installation Information (in inches)
4-3/16
Cutout width
28-1/2"
Allow 1" overlap of oven over top and bottom edges of cutout
Allow 11/16"-3/4" for overlap of oven over side edges of cutout
A
B
15-27/32"
Excluding
Handle
Note: Cabinets installed adjacent to wall ovens must have an
adhesion spec of at least a 194°F temperature rating.
19"
Cutout depth
Most 30" Wall Cabinets can be used with this unit.
Junction
box
location
Note: 2" minimum between cutouts when installed above
warming drawer or single wall oven.
A
B
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Conduit
(48-1/2"
long)
21"
21-7/8
Cutout height
Construct Solid
Bottom Min.
3/8" Plywood
Supported by
2 x 4 or 1 x 2
Runners, all
Four Sides.
(Must Support
150 lbs.)
Required
cutout location
36-3/4"
29-25/32
minimum
from floor
30
For answers to your Monogram,® GE Profile™ or
GE® appliance questions, visit our website at
ge.com or call GE Answer Center® service,
800.626.2000.
Listed by
Underwriters
Laboratories
Specification Revised 2/07
240440
Download from Www.Somanuals.com. All Manuals Search And Download.
SCB2001K
GE Profile Advantium® Wall Oven
Features and Benefits
• Speedcook Technology – Delivers oven-quality food up to eight times faster than
a conventional oven
• Multiple Cooking Modes – Bakes, broils, browns, roasts, microwaves and grills fast,
with no preheating
• Over 100 Pre-Programmed Menu Items, Manual Cook, Help and Demo Modes
• Sensor Cooking Controls – Automatically adjust the time and power for exceptional
cooking results
• Auto and Time Defrost – Automatically defrosts for a specified amount of time
• Halogen Interior Light – Helps you monitor food as it cooks
• Two-Line Bilingual Scrolling Display – Provides helpful cooking tips and oven-use
instructions in easy-to-read English or Spanish
• Stainless Steel Interior – Durable surface that cleans quickly with a simple wipe
of the towel
• Model SCB2001KSS – Stainless steel
Specification Revised 2/07
240440
Download from Www.Somanuals.com. All Manuals Search And Download.
|