FMWCC44
Slipcase
Installation Guide
Stylistic LT C-500
Slide the pen tablet into the case, bottom first, with the
screen facing the open window (see Figure 2). Reattach
the flap on the top of the slipcase.
These instructions provide details on using the
FMWCC44 slipcase. This case is designed for use
with your pen tablet. The slipcase provides added
protection when transporting, using, or storing the
pen tablet.
Pen
Holder
Note: Prior to installing your pen tablet in the
slipcase, be sure to install a screen protector on
the screen. It is difficult to install a screen
protector once the system is in the slipcase.
To install your pen tablet into the slipcase, open
the top flap of the slipcase. The flap is secured by
three snaps and a Velcro® strip (see Figure 1).
D-ring
(4 places)
Figure 2. Stylistic LT C-500 Slipcase - Front
To adjust the fit of the hand straps on the back of the
case, peel apart the two Velcro®-backed flaps
comprising each strap. Adjust the length of the strap by
peeling the strap away from the flap and adjusting it to
the desired length.
Snaps
To secure the shoulder strap, attach the strap clips to
two of the D-rings. The slipcase can be carried
vertically or horizontally, depending on how you orient
the clips.
Figure 1. Stylistic LT C-500 Slipcase - Rear
Stylistic LT C-500 is a trademark and Fujitsu is a registered trademark of Fujitsu Ltd. © 2000 Fujitsu PC Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
8/00
58-0763-00A
|