P3PC-E817-02EN
Color Image Scanner
TM
fi-5110EOX
Operator’s Guide
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Thank you for purchasing the ScanSnap fi-5110EOX Color Image Scanner product.
ScanSnap fi-5110EOX comes with a color image scanner and office applications. It is a complete
Office Solution designed to improve your productivity and to solve your office scanning problems.
ScanSnap product has the following features.
I Just pressing the Scanner button allows you to turn images on paper into PDFs!
You can turn the documents that clutter up your desktop into PDFs, and manage and
archive them on your computer. You can use the Adobe® Acrobat® software packaged
with this scanner to display and these PDF documents.
ScanSnap product can also automatically recognize the type of document, color or
black & white, so scanned image files can be made smaller when scanning documents
containing a mixture of color and black & white pages. You can also have the scanner
automatically remove blank pages in documents in order to reduce the size of files even
more.
I Effortless scanning!
Double-sided color documents A4 or Letter in size can be scanned at a speed of about
15 sheets/minute. (when Scan mode is set to Normal, Color mode is set to Auto, and
Compression rate is set to3)|" (*1)
I Small desktop footprint!
Smaller than a sheet of A4 or letter paper in size, ScanSnap scanner can be left on your
desk all the time.
I Business cards easily filed!
Business cards can be easily filed and searched for using the OCR function by using the
"CardMinderTM" software supplied with the scanner.
(*1) -Depending on the document, scanning speed may become slower in "B&W"
(Black&White) mode (due to process for converting data scanned in color to mono-
chrome data).
Example: Scanning color brochures in "B&W" mode
-When either of "Automatic size and skew detection", or "Automatic image rotation" is
enabled, scanning speed may become slower.
(*2) ScanSnap fi-5110EOX does not support TWAIN and ISIS standards.
This document describes how to handle ScanSnap fi-5110EOX and basic operation methods.
Before you start using ScanSnap, fi-5110EOX be sure to thoroughly read this manual to ensure
correct use.
ScanSnap fi-5110EOX is referred to as ScanSnap hereafter in this document.
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
I Regulatory Information ......................................................... v
I Note, Liability ...................................................................... viii
I Preface ................................................................................ viii
I Safety Precautions ............................................................... xi
Chapter 1 Before You Start Using Your Scanner...................1
1.1 Checking the Contents of the Scanner Package............. 2
1.2 Names and Functions of Parts.......................................... 3
Front Side ............................................................................................. 3
Operation Button................................................................................... 4
Rear Side.............................................................................................. 4
Chapter 2 Connecting ScanSnap ............................................5
2.1 Installing ScanSnap............................................................ 6
Before Installing ScanSnap................................................................... 6
Installing Adobe Acrobat....................................................................... 8
Installing Supplied Programs .............................................................. 11
2.2 Connecting ScanSnap to your PC .................................. 17
Connecting the AC Adapter ................................................................ 17
Connecting the USB Cable................................................................. 18
Chapter 3 Basic Scanner Operations....................................23
3.1 Flow of Operations ........................................................... 24
Preparation ......................................................................................... 24
Scanning documents .......................................................................... 25
Turning the Scanner ON/OFF............................................................. 28
End of Operation................................................................................. 29
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Scanning Different Document Types.............................. 30
3.3 Loading Documents ......................................................... 32
How to load documents ...................................................................... 32
3.4 Changing Scan Settings .................................................. 35
3.5 Various settings according to your needs..................... 52
Scanning only one side of a document............................................... 53
Scanning color document in black and white...................................... 54
Skipping blank pages.......................................................................... 55
Deleting pages from a PDF file........................................................... 57
Correcting skewed documents............................................................ 58
Correcting the orientation of scanned images .................................... 60
Rotating the page view of a PDF file................................................... 62
Saving scanned images as different files............................................ 64
Saving scanned images with a high compression rate....................... 66
Merging scanned images into one PDF file ........................................ 68
Converting scanned images to an editable text with OCR.................. 71
3.6 Scanning Business Cards ............................................... 72
Scanning business cards.................................................................... 72
3.7 Viewing PDF File Thumbnails.......................................... 76
Start the PDF File Thumbnail View..................................................... 76
Displaying thumbnails of PDF files ..................................................... 78
Chapter 4 Uninstalling ScanSnap .........................................79
4.1 Uninstalling Supplied Programs .................................... 80
Chapter 5 Troubleshooting....................................................83
5.1 Clearing Document Jams................................................. 84
5.2 Troubleshooting Checklist .............................................. 86
Chapter 6 Daily Care...............................................................91
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 Cleaning Materials............................................................ 92
6.2 Cleaning the Scanner Exterior ........................................ 93
6.3 Cleaning the Inside of the Scanner................................. 94
Chapter 7 Replacing Consumables.......................................99
7.1 Replacing Consumables................................................ 100
Part Nos. and Replacement Cycle of Consumables......................... 100
7.2 Replacing the Pad ASSY................................................ 102
7.3 Replacing the Pick Roller............................................... 105
Appendix A Installation Specifications .................................111
Index...........................................................................................113
Repairs.......................................................................................117
Download from Www.Somanuals.com. All Manuals Search And Download.
II Regulatory Information
FCC declaration
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver
is located.
•Consult your dealer or an experienced radio/TV technician.
FCC warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Changes or modifications not expressly approved by the party responsi-
ble for compliance could void the user’s authority to operate the equip-
ment.
CAUTION
• The use of a shielded interface cable is required to comply with the Class B
ATTENTION
limits of Part 15 of FCC rules.
• The length of the AC cable must be 3 meters (10 feet) or less.
Canadian DOC Regulations
This digital apparatus does not exceed the Class B limit for radio noise emissions from
digital apparatus set out in the Radio interference Regulations of the Canadian Department
of Communications.
This Class B digital apparatus complies with Canadian ICES-003.
Le pésent appareil numérique n’ément pas de bruits radioélectriques dépassant les limites
applicables aux appareils numériques de la classe B prescridtes dans le Réglesment sur le
brouillage radioélectrique dicté par le ministere des Communications du Canada.
Cet appareil numérique de la classe B est conformme à la norme NMB-003 du Canada.
Download from Www.Somanuals.com. All Manuals Search And Download.
Bescheinigung des Herstellers / Importeurs
Hiermit wird bescheinigt, daß der/die/das
ScanSnap fi-5110EOX
•In Übereinsstimmung mit den Bestimmungen der EN45014(CE) funkentstört ist.
•Laut Maschinenlärminformationsverordnung 3. GS GV, 18.01.1991:Der höchste
Schalldruckpegel beträgt 70 dB (A) oder weniger gemäß ISO/7779.
International ENERGY STAR® Program
As an ENERGY STAR® Partner, PFU LIMITED has determined that
this product meets the ENERGY STAR® guidelines for energy
efficiency.
The International ENERGY STAR® Office Equipment Program is an
international program that promotes energy saving through the penetration of energy
efficient computers and other office equipment. The program backs the development and
dissemination of products with functions that effectively reduce energy consumption. It is an
open system in which business proprietors can participate voluntarily. The targeted products
are office equipment such as computers, monitors, printers, facsimiles, copiers, scanners, and
multifunction devices. Their standards and logos (
nations.
) are uniform among participating
Use in High-safety Applications
This product has been designed and manufactured on the assumption that it will be used in
office, personal, domestic, regular industrial, and general-purpose applications. It has not
been designed and manufactured for use in applications (simply called "high-safety
applications" from here on) that directly involve danger to life and health when a high degree
of safety is required, for example, in the control of nuclear reactions at nuclear power
facilities, automatic flight control of aircraft, air traffic control, operation control in mass-
transport systems, medical equipment for sustaining life, and missile firing control in
weapons systems, and when provisionally the safety in question is not ensured. The user
should use this product with adopting measures for ensuring safety in such high-safety
applications. PFU LIMITED assumes no liability whatsoever for damages arising from use
of this product by the user in high-safety applications, and for any claims or compensation
for damages by the user or a third party.
Download from Www.Somanuals.com. All Manuals Search And Download.
About the use of mercury
The scanner lamp contains mercury.
To avoid unexpected injury, read the following carefully.
Doing the following actions may result in serious personal injuries:
•Do not put the substance in the lamp in your mouth as it contains mercury.
•Do not incinerate, crush, or shred the scanner.
•Do not breathe the chemical liquid contained in the scanner parts.
Disposing of the scanner should be conducted as required by local ordinances or regulations.
Trademarks
ScanSnap, ScanSnap logo, and CardMinder are the trademarks of PFU LIMITED.
Microsoft, Windows, and Windows NT are registered trademarks of Microsoft Corporation
in the United States and/or other countries.
Adobe, the Adobe logo, and Acrobat are either registered trademarks of Adobe Systems
Incorporated in the United States and/or other countries.
Other product names are the trademarks or registered trademarks of the respective
companies.
How Trademarks Are Indicated In This Manual
CardMinder:
References to operating systems (OS) are indicated as follows:
CardMinderTM for ScanSnap.
Windows 98:
Windows Me:
Windows 2000:
Windows XP:
Microsoft® Windows® 98 operating system.
Microsoft® Windows® Millennium Edition operating system.
Microsoft® Windows® 2000 Professional operating system.
Microsoft® Windows® XP Professional operating system,
Microsoft® Windows® XP Home Edition operating system.
Where there is no distinction between the different versions of the above operating system,
the general term "Windows" is used.
Adobe Acrobat 6.0:
Adobe® Acrobat® 6.0 Standard.
Where there is no distinction between the different versions of the above application, the
general term "Adobe Acrobat" is used.
Manufacturer
PFU LIMITED
International Sales Dept., Imaging Business Division, Products Group
Solid Square East Tower, 580 Horikawa-cho, Saiwai-ku, Kawasaki-shi Kanagawa 212-8563,
Japan
Phone : (81-44) 540-4538
All Rights Reserved, Copyright© PFU LIMITED 2004.
Download from Www.Somanuals.com. All Manuals Search And Download.
II Note, Liability
READ ALL OF THIS MANUAL CAREFULLY BEFORE USING THIS PRODUCT. IF
THIS PRODUCT IS NOT USED CORRECTLY, UNEXPECTED INJURY MAY BE
CAUSED TO USERS OR BYSTANDERS.
While all efforts have been made to ensure the accuracy of all information in this manual,
PFU assumes no liability to any party for any damage caused by errors or omissions or by
statements of any kind in this manual, its updates or supplements, whether such errors are
omissions or statements resulting from negligence, accidents, or any other cause. PFU
further assumes no liability arising from the application or use of any product or system
described herein; nor any liability for incidental or consequential damages arising from the
use of this manual. PFU disclaims all warranties regarding the information contained herein,
whether expressed, implied, or statutory.
II Preface
Safety Precautions
This manual describes important details for ensuring the safe and correct use of this product.
Thoroughly read this manual before you start to use this product. In particular, be sure to
read and fully understand the Safety Precautions described in this manual before you use this
product.
Also, store this manual in a safe place so that it can be easily referred to during use of this
product.
Warning Indications Used In This Manual
This manual uses the following indications to ensure safe and correct use of this product, and
to prevent possible danger and injury to the operator and other persons.
This indication alerts operators to an operation that, if not strictly
observed, may result in severe injury or death.
WARNING
This indication alerts operators to an operation that, if not strictly
observed, may result in safety hazards to personnel or damage to
equipment.
CAUTION
Download from Www.Somanuals.com. All Manuals Search And Download.
Symbols Used In This Manual
This manual uses the following symbols in explanations in addition to warning indications.
This symbol alerts operators to particularly important information. Be sure to
ATTENTION
read this information.
This symbol alerts operators to helpful advice regarding operation.
HINT
This symbol shows operation with your computer.
Operation
This symbol shows operation with your scanner.
Operation
A TRIANGLE symbol indicates that special care and attention is required.
The drawing inside the triangle shows the specific caution.
A CIRCLE with a diagonal line inside shows action which users may not perform.
The drawing inside or under the circle shows the specific action that is not
allowed.
Outline characters on a colored background show instructions users should fol-
low.
R
It may also include the drawing that shows the specific instruction.
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Examples In This Manual
The screen examples in this manual are subject to change without notice in the interest of
product improvement.
If the actual displayed screen differs from the screen examples in this manual, operate by
following the actual displayed screen while referring to the User's Manual of the scanner
application you are using.
Furthermore, the screenshots in this manual are for the ScanSnap Manager and the
CardMinder application.
The screen examples in this manual are created according to Microsoft Corporation’s
Guideline.
About Maintenance
The user must not perform repairs on this scanner.
Contact the store where you purchased the scanner or an authorized FUJITSU Image
Scanner service provider to make repairs to this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
II Safety Precautions
WARNING
The following describes important warnings described in this manual.
Do not touch the AC cable with wet hands.
Do not touch the power plug with wet hands. Doing so might cause electric
shock.
Do not damage the AC cable.
A damaged AC cable may cause fire or electric shock.
Do not place heavy objects on AC cables, or pull, bend, twist, heat, damage or
modify AC cables.
Also, do not use damaged AC cables or power plugs, and AC cables or power
plugs when the wall socket is loose.
Use only specified AC cables and connector cables
Use only specified AC cables and connector cables. Failure to use the correct
cables might cause electric shock and equipment failure.
Use this scanner only at the indicated power voltage. Do not
connect to multiple-power strips.
Use this scanner only at the indicated power voltage and current. Improper
power voltage and current might cause fire or electric shock.
Also, do not connect to multiple-power strips.
Wipe any dust from the power plug.
Wipe off any dust from metal parts on the power plug or metal fittings with a soft,
dry cloth. Accumulated dust might cause fire or electric shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Do not install in locations subject to oil smoke, steam, humidity,
and dust.
Do not install the scanner in locations subject to oil smoke, steam, humidity, and
dust. Doing so might cause a fire or electric shock.
Do not use the scanner if you smell strange odor.
If you detect heat coming from the device or detect other problems such as
smoke, strange smells or noises, immediately turn off the scanner and then
disconnect its power plug.
Make sure that the smoking has stopped, and then contact the store where you
bought the scanner or an authorized FUJITSU scanner service provider.
Turn the scanner OFF if it is damaged.
If the scanner is damaged for any reason, turn off the scanner and unplug the
power cable before contacting the store where you purchased the scanner.
Do not put liquids inside the scanner.
• Do not insert or drop metal objects in to the scanner.
• Do not scan wet documents or documents with paper clips or staples.
• Do not splash or allow the scanner to get wet.
If foreign objects (water, small metal objects, liquids, etc.) get inside the scanner,
immediately turn off the scanner and disconnect the power plug from the power
outlet, then contact the store where you bought the scanner or the Maintenance
Service Center.
Pay particular attention to this warning in households where there are small chil-
dren.
Do not touch the inside of the scanner unless necessary.
Do not take apart or modify the scanner. The inside of the scanner contains high-
voltage components. Touching these components might cause fire or electric
shock.
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTION
The following describes important cautions described in this manual.
Do not install the scanner on unstable surfaces.
Install the scanner on a desk so that none of its parts protrude outside of the
desktop. Also, make sure that the scanner is installed on a flat, level surface.
Do not install the scanner on unstable surfaces. Install the scanner on a level
surface that is free of vibration to prevent it from falling.
Install the scanner on a strong surface that will support the weight of the
scsanner and other devices.
Firmly insert the power plug.
Firmly insert the power plug into the power outlet as far it can go.
Do not block the ventilation ports.
Do not block the ventilation ports. Blocking the ventilation ports generates heat
inside of scanner, which may results in fire or scanner failure.
Do not place heavy objects or climb on top of the scanner.
Do not place heavy objects on the scanner or use the scanner's top surface for
performing other work. Improper installation might cause injuries.
Before moving the scanner, disconnect the power plug from the
power outlet.
Do not move the scanner with the power and interface cables connected as this
might damage the cables, causing fire, electric shock or injuries.
Before moving the scanner, be sure to disconnect the power plug from the power
outlet, and disconnect data cables. Also, make sure that the floor is free of
obstructions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Protect the scanner from static electricity.
Install the scanner away from strong magnetic fields and other sources of
electronic noise. Also, protect the scanner from static electricity as this might
cause the scanner to malfunction.
Do not use aerosol sprays near the scanner.
Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
Avoid any contact when scanner is in use.
Avoid touching any scanner mechanism when scanning as this may cause
injuries.
Disconnect the power plug from the power outlet when the
scanner is not used for a long period of time.
When the scanner is not used for a long period of time, be sure to disconnect the
power plug from the power outlet for safety.
Do not install the scanner in the direct sunlight.
Do not install the scanner in the direct sunlight or near heating apparatus. Doing
so might cause excessive heat to build up inside the scanner, causing fire or
scanner trouble. Install the scanner in a well-ventilated location.
Do not use the scanner immediately after moving it from a cold
place into a warm room.
Do not use the device immediately after moving it from a cold place into a cold
room. This may cause condensation, which might lead to scanning errors. Let the
device dry about one or two hours before you use it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter1
Before You Start Using Your Scanner
1
This chapter describes the necessary preparations before using ScanSnap.
1.1 Checking the Contents of the Scanner Package ................................................. 2
1.2 Names and Functions of Parts .............................................................................. 3
Download from Www.Somanuals.com. All Manuals Search And Download.
1.1 Checking the Contents of the Scanner Package
When you unpack the scanner package, make sure that the package contains all the parts on the list
included in the package.
Download from Www.Somanuals.com. All Manuals Search And Download.
1.2 Names and Functions of Parts
1.2 Names and Functions of Parts
This section describes the names of parts and their functions.
I Front Side
1
Paper chute cover
Open the cover to use the scanner.
⇒Opening the cover turns on the scanner.
ADF cover
(ADF:Automatic Document Feeder)
Stacker
Attach the scanner as shown. Adjust the two front pro-
jection portions to the hollows on the bottom of the
scanner.
Paper chute cover
After opening it, load the documents to be scanned
on this unit.
Side guide
Ajust the side guides to the width of documents so
that the scanned imageswill not get skewed.
Cover open lever
To open the ADF cover, pull this lever towards you.
Operation button
⇒Refer to the next page.
Stacker
Before using the stacker, pull it out as shown above.
You can also use the scanner without the Stacker.
HINT
Download from Www.Somanuals.com. All Manuals Search And Download.
I Operation Button
[SCAN] button
Press this button to start the scanning.
[POWER] button
Turns on/off the power supply.
SCAN
POWER
Power lamp
Indicates the scanner status.
Green; Lighting
Green; Blinking
:Ready
:Scanning
DUPLEX
COLOR
Orange; Lighting :Error
Light off :Power off
I Rear Side
AC adapter connector
USB connector
Seal (informing you that the installation of the
software has to be performed first)
After installing the software, remove this seal.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter2
Connecting ScanSnap
This chapter describes how to connect ScanSnap to your personal computer.
Before you connect the ScanSnap scanner, install the supplied programs (Adobe Acrobat,
CardMinder and ScanSnap Manager) on your personal computer.
2
• Please install ScanSnap Manager before connecting ScanSnap scanner to
ATTENTION
your personal computer.
If you connect ScanSnap before installing the ScanSnap Mnanager, Scan-
Snap will not operate correctly.
• If you have connected ScanSnap beforehand, the "Found New Hardware
Wizard" (this screen might differ slightly according to the used OS) screen
appears. If this screen is displayed, click the [Cancel] button to close the
Wizard screen and install ScanSnap Manager first.
• ScanSnap fi-5110EOX cannot be connected to a personal computer with
ScanSnap! fi-4110EOX2 or another ScanSnapfi-5110EOX.
• If any driver of the ScanSnap! fi-4110EOX2 has already been installed on your
computer, uninstall it before starting th installation.
• If the driver of ScanSnap! fi-4010CU has already been installed on your com-
puter, there is no need to uninstall it. Both devices, ScanSnap fi-5110C and fi-
4010CU, can be connected simultaneously to a personal computer.
ScanSnap Manager includes the driver software for ScanSnap! fi-4110EOX2.
HINT
You can use this driver also for ScanSnap! fi-4110EOX2, if you have.
Note: It is not possible to simultaneously connect ScanSnap fi-5110EOX and
ScanSnap! fi-4110EOX2 to one personal computer.
For details about the space required for installing the scanner, refer to the Appendix, under "Instal-
lation Specifications" (page 111).
2.1 Installing ScanSnap................................................................................................ 6
2.2 Connecting ScanSnap to your PC....................................................................... 17
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 Installing ScanSnap
"Installation" is the operation of copying the program files supplied with ScanSnap to the hard
disk of your PC, and creating the environment for using ScanSnap on the PC installed with the
ScanSnap program files.
I Before Installing ScanSnap
1. Before installing ScanSnap, please perform the following preparation.
I Operating system
Either of the following OS is required:
•
•
•
•
Windows 98
Windows Me
Windows 2000
Windows XP (Service Pack 1 or later)
Windows 98
Windows 98
Windows
2000
Windows Me
Windows XP
(2nd Edition)
ScanSnap Manager
CardMinder
3
3
3
3
3
3
3
3
3
3
3
3
3
3
3
Adobe Acrobat 6.0
PDF Thumbnail View
2. Check your system.
The system requirements for ScanSnap are as follows:
I Personal computer
•
IIntel® Pentium® III 600MHz or higher (recommended: Intel® Pentium® 4 1.8GHz
or higher)
•
•
CD-ROM drive (required for installation)
USB port (USB 2.0/1.1)
I RAM
128MB or more (recommended: 256MB or more)
•
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 Installing ScanSnap
• ScanSnap may not function if it is connected to the USB ports for the keyboard
or monitor.
ATTENTION
• If you are using a commercially available USB hub, use a type equiped with an
AC adapter.
v
• If you connect the scanner with USB 2.0, it is required that the USB port and
the Hub are compliant with USB 2.0. The scanning speed may slow down
when you connect the scanner with USB 1.1. If your computer has the compat-
ible USB 2.0 port, please use it.
Refer to the following list for USB 2.0 support.
• If the CPU and the memory do not meet the required specification, the scan-
ning speed will be down.
2
I Free disk space
•
•
ScanSnap Manager
CardMinder
50 Mbytes
120 Mbytes
•
•
Adobe Acrobat 6.0
PDF Thumbnail View
250 Mbytes
5 Mbytes
I USB 2.0 support
Windows 98
(2nd Edition)
Windows
2000
Windows 98
Windows Me
Windows XP
On-board PC
interface
3
3
3
Expansion
3
3
card interfaces
* USB 2.0 driver supplied by Microsoft Corporation is required for the usage of the above.
3. Make sure that ScanSnap is disconnected from your personal computer.
4. Start up your personal computer.
When using Windows 2000 or Windows XP, log on as a user with "Administrator" privi-
leges (computer administrator privileges when using Microsoft Windows XP Home Edition
operation system)
5. Close all currently running programs.
Download from Www.Somanuals.com. All Manuals Search And Download.
I Installing Adobe Acrobat
Install Adobe Acrobat using the following procedure from the "Adobe Acrobat 6.0 CD-ROM" sup-
plied with the scanner .
"Adobe Acrobat 6.0 Standard" system requirements:
ATTENTION
• OS: Windows 98 Second Edition.
Windows 2000 (Service Pack 2 or later).
v
Windows XP Professional or Home Edition.
• Internet Explorer 5.01 or later
• Screen Resolution: 800 x 600 or higher
Please note that Adobe Acrobat 6.0 is not supported by Windows 98 and Win-
®
®
dows Me. If you are using one of these OS, please install Adobe Acrobat
™
Reader following the instructions on page 8.
* For further details, please visit FAQ on the Adobe Web Site
http://www.adobe.com (As of Dec.12 2003)
Adobe Acrobat is required for displaying the "ScanSnap fi-5110EOX Opera-
tor’s Guide" and "CardMinder User’s Guide".
HINT
Adobe Acrobat can also be linked to ScanSnap so that scanned images are
displayed on the Acrobat window.
* There is no need to install Adobe Acrobat if it is already installed on your PC.
⇒ Proceed to "Installing Supplied Programs" (page 11).
<For Windows 98 / Windows Me>
Adobe Acrobat 6.0 is not supported by Windows 98 and Windows Me. In order
to display a PDF file (e.g. instruction manual and/or a scanned image), please
®
®
™
install Adobe Acrobat Reader following the instructions below.
1. Insert the Setup CD-ROM into the CD-ROM drive.
2. Right click the Start button and select the explorer.
3. Double click the icon [ar505enu.exe] which is located under [AcroRead] in
the CD-ROM drive.
4. Install the application following the instructions on the Setup screen.
®
®
* Note that it is not possible to edit scanned images with Adobe Acrobat
™
Reader .
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 Installing ScanSnap
Operation
1. Insert the Adobe Acrobat 6.0 CD-ROM into the CD-ROM drive.
⇒ The CD-ROM is automatically recognized, and the "Adobe Acrobat 6.0 AutoPlay"
screen is displayed.
If the "Adobe Acrobat 6.0 AutoPlay" screen is not displayed even after the
HINT
Adobe Acrobat 6.0 CD-ROM is inserted into the CD-ROM drive, double-click
the "AutoPlay.exe" icon at the CD-ROM drive using the Explorer.
2
2. The following screen is displayed. Select [Install] and click on the [Install Adobe Acro-
bat 6.0 Standard] button.
3. Click the [Next] button.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The setup screen appears. Install Adobe Acrobat following the instructions on the
screen.
For details about the installation of Adobe Acrobat 6.0, click on the [How to
HINT
install] button and read the instructions.
For details about the functions and operations of Adobe Acrobat 6.0, refer to
the "Adobe Acrobat 6.0 Help."
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 Installing ScanSnap
I Installing Supplied Programs
Install the supplied programs (ScanSnap Manager, CardMinder, PDF Thumbnail View) for Scan-
Snap from the "Setup CD-ROM" supplied with the scanner.
Operation
1. Insert the scanner Setup CD-ROM into the CD-ROM drive.
⇒ The "ScanSnap Installer" starts up and the "ScanSnap Setup" dialog box is displayed.
2
If the "ScanSnap Setup" dialog box is not displayed even after inserting the
HINT
Setup CD-ROM into the CD-ROM drive, double-click the "Install.exe" icon in
the folder of the used CD-ROM drive using the Explorer.
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Click the [Readme] button in the "ScanSnap Setup" window.
This item describes the precautions to follow when installing and uninstalling ScanSnap, as
well as the structure of the files on the Setup CD-ROM, and other information.
⇒ When you finished reading this description, close the screen.
3. Click the [Install Products] button in the "ScanSnap Setup" dialog box.
The "Welcome to the InstallShield Wizard for ScanSnap" screen is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 Installing ScanSnap
4. Click the [Next] button in "Welcome to the InstallShield Wizard for the ScanSnap"
2
⇒ The "License Agreement" screen is displayed.
5. Please read the details of the "License Agreement." If you agree with them, click the
[Yes] button.
If you do not accept the terms, click the [No] button. This will abort the installation.
⇒ When you click the [Yes] button, the "Choose Destination Location" screen is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. In the "Choose Destination Location" screen, choose the installation directory and
click the [Next] button.
To install ScanSnap in the displayed folder, click the [Next] button.
Normally, there is no need to change the folder in the installation directory. Change the
installation directory if there is not enough free disk space available for the selected drive.
To change the installation folder for ScanSnap, click the [Browse...] button. The "Select
Directory" dialog box is displayed. Select the folder to install ScanSnap to.
⇒ The "Setup Type" screen is displayed.
7. Select an installation option and click [Next] button.
Select [Typical] for ordinary use.
⇒ This displays the "Start Copying Files" screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
2.1 Installing ScanSnap
Depending on the selected item, the following programs are installed.
HINT
• Typical
"ScanSnap Manager", "CardMinder" and "PDF Thumbnail View" are installed
including their manuals.
• Compact
"ScanSnap Manager" is installed including its manual.
• Custom
You can select the software and the manuals to install.
2
8. In the "Start Copying Files" screen, check the files that will be installed and click the
[Next] button.
⇒ This starts the installation of the programs supplied with ScanSnap. After the installa-
tion has finished, the "InstallShield Wizard Complete" screen will be displayed.
9. In the "InstallShield Wizard Complete" screen, click the [Finish] button.
⇒ If you selected "Yes, I want to restart my computer now", your PC will be restarted.
⇒ If you selected "No, I will restart my computer later.", the "ScanSnap Setup" dialog box
will be displayed. Click the [Exit] button to close the "ScanSnap Setup" dialog box
(To complete the installtion, you have to restart your PC.)
Download from Www.Somanuals.com. All Manuals Search And Download.
To display the "ScanSnap fi-5110EOX Operator’s Guide" and "CardMinder
HINT
®
®
TM
User’s Guide," Adobe Acrobat or Adobe Acrobat Reader is required. If this
software is not installed on your PC, install Acrobat 6.0 from the "Adobe Acro-
bat 6.0 CD-ROM" supplied with the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Connecting ScanSnap to your PC
2.2 Connecting ScanSnap to your PC
Follow the procedure below to connect ScanSnap to your PC.
1. Connect ScanSnap to a power outlet using the AC cable.
2. Connect ScanSnap to your PC using the USB cable.
• Be sure to connect the AC cable first before connecting the USB cable.
ATTENTION
•
Be sure to install ScanSnap Manager to your PC before connecting ScanSnap to your
PC. (For details about the installation, refer to "Installing ScanSnap" (page 6)).
2
The following describes each of the above two procedures.
I Connecting the AC Adapter
Connect the power cable as shown below.
1. Connect the AC cable to the AC adapter.
AC adapter
AC cable
Do not use cables other than the ones supplied with this product.
Use only specified AC cables and AC adapter.
ATTENTION
2. Connect the AC adapter to the AC adapter connector on ScanSnap and to a power outlet.
Outlet
Inlet
Download from Www.Somanuals.com. All Manuals Search And Download.
I Connecting the USB Cable
Connect the USB cable as shown below.
• Use only the USB cable supplied with the Scanner. The operation with a com-
ATTENTION
mercially available USB cable is not guaranteed.
• When connecting to a USB hub, be sure to connect the scanner to the hub
nearest your PC (first stage). If you connect to a USB hub from the second
stage onwards, ScanSnap may not function correctly.
• If you connect the scanner with USB 2.0, it is required that the USB port and
the Hub are compliant with USB 2.0. The scanning speed may slow down
when you connect the scanner with USB 1.1. If your computer has the compat-
ible USB 2.0 port, please use it.
1. Remove the seal on the rear side of ScanSnap scanner.
USB cable
Seal
2. Insert the USB cable into the USB connector of ScanSnap and plug the other end of
the cable into the USB port on your PC.
Insert firmly the USB-cable as far as it can go into the connector.
USB cable
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Connecting ScanSnap to your PC
3. Open the paper chute cover of ScanSnap.
Paper chute cover
[POWER] button
⇒ ScanSnap is automatically turned on and detected by your PC.
2
If the scanner is not automatically turned on, push the [POWER] button on the
ATTENTION
scanner.
I For Windows 98
The "Insert disk" request is displayed.
Insert the Windows 98 CD-ROM into the CD-ROM drive, and click the [OK] button.
I For Windows Me
New hardware is automatically added, and processing is continued.
I For Windows 2000
The "Digital Signature Not Found" dialog box is displayed. Click the [Yes] button.
Download from Www.Somanuals.com. All Manuals Search And Download.
I For Windows XP
The "Found New Hardware Wizard" dialog box is displayed. Click the [Next] button.
Althought the message "If your hardware came with an installation CD or floppy
ATTENTION
disk, insert it now." is displayed, you do not need to insert the CD into the CD-
ROM drive.
The "Hardware Installation" dialog box is displayed. Click the [Continue Anyway]
button.
The "Found New Hardware Wizard" dialog box informing you that the Wizard will end
is displayed. Click the [Finish] button.
⇒ ScanSnap is added to your PC as new hardware.
Download from Www.Somanuals.com. All Manuals Search And Download.
2.2 Connecting ScanSnap to your PC
It may take some time for the "ScanSnap Manager" icon on the task tray to be
ATTENTION
S
displayed as
.
S
Push the [POWER] button on the scanner when the icon remains as
.
When you turn off/on the scanner, press the [POWER] button for longer than
one second.
HINT
*For preventing mis-operation, the [POWER] button does not work
2
unless it is pressed for longer than one second.
The power supply of this scanner is controlled by performing the following
actions:
HINT
• Opening/closing the paper chute cover on the scanner,
• Turning on/off the PC,
• Pushing the [POWER] button on the scanner (when the paper chute cover is
opened).
Opening /closing the paper chute cover controls the scanner’s power in any
case. For example, the scanner will not be turned on even when you have
switched on your PC if the paper chute cover is closed.
Generally, you can simply turn on/off the scanner only by opening/closing the
paper chute cover when the scanner is connected to your PC.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 3
Basic Scanner Operations
This chapter describesthe basic operations of ScanSnap.
3
3.1 Flow of Operations ............................................................................................... 24
3.2 Scanning Different Document Types.................................................................. 30
3.3 Loading Documents ............................................................................................. 32
3.4 Changing Scan Settings....................................................................................... 35
3.5 Various settings according to your needs ......................................................... 52
3.6 Scanning Business Cards.................................................................................... 72
3.7 Viewing PDF File Thumbnails.............................................................................. 76
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Flow of Operations
This section describes the flow of operations starting with the scanning of documents on ScanSnap
to the saving of scanned images in PDF format.
I Preparation
Operation
1. Make sure that the AC cable is connected to the scanner.
2. Make sure that the scanner is correctly connected to your PC.
You can connect the scanner to your computer after turning it on. When the
HINT
scanner is already connected to your PC, you do not need to reconnect it.
3. Turn on your PC.
⇒ The "ScanSnap Manager" icon appears when Windows is started up.
4. Open the paper chute cover.
Paper chute cover
[POWER] button
S
S
⇒ The scanner is turned on and the "ScanSnap Manager" icon will change from
to
.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Flow of Operations
If the scanner is not automatically turned on even when the paper chute cover
is opened, push the [POWER] button on the scanner.
HINT
I Scanning documents
Operation
1. Make sure that the "ScanSnap Manager" icon is displayed on the task tray.
3
If the "ScanSnap Manager" icon is not displayed on the task tray, select [Pro-
grams] - [ScanSnap Manager] - [ScanSnap Manager] from the [Start] menu to
start up "ScanSnap Manager".
HINT
Generally, "ScanSnap Manager" is registered under "Startup" programs, so its
icon is displayed on the tasktray when Windows is started up. If it is not regis-
tered under "Startup" programs, select [All Programs] - [ScanSnap Manager] -
[Startup Register] from [Start] menu in order to register it.
2. Load the document onto the scanner.
Refer to "3.2 Scanning Different Document Types" (page 30) and "3.3 Loading Documents"
(page 32).
SCAN
3. Press
([SCAN] button).
⇒ This starts the scanning.
As the default setting, documents are scanned with the "Duplex" mode when
HINT
you press the [SCAN] button. With "ScanSnap Manager", you can set the scan-
ner to scan documents using "Simplex" mode by pressing the [SCAN] button.
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not connect or disconnect other USB devices during the scanning opera-
tion.
ATTENTION
• Do not close the paper chute cover nor push the [POWER] button on the scan-
ner during the scanning operation.
v
⇒ The lamp on the scanner lights green during the scanning operation.
The following window appears to indicate the scanning status.
⇒ The supplied application (Adobe Acrobat, etc.) is started up and the scanned image is dis-
played.
For details about the settings for the scanning, file names and the destination folder to
save the data, etc., refer to "3.4 Changing Scan Settings" (page 35).
About the scanning of Business cards, please refer to "3.6 Scanning Business Cards" (page 72).
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Flow of Operations
As the default setting, documents are scanned according to the following set-
ting: "Scan mode: Nomal" and "Select color mode: Auto".
HINT
• Before scanning documents containing printed or handwritten text, mark the
"Setting for text only document" checkbox under [Option...] on the [Scanning]
tab in the "Scan and Save Settings" dialog box. For details, refer to "3.4
Changing Scan Settings" (on page 35).
HINT
• The application that is automatically started up after the scanning depends on
the setting of the [Application] tab in the "Scan and Save Settings" dialog box.
For details, refer to "3.4 Changing Scan Settings" (on page 35).
• Scanned documents can also be saved in an image format (JPEG). In this
case, change the document scan settings before scanning the document. For
details about changing the document scan settings, refer to "3.4 Changing
Scan Settings" (on page 35). The following document scan settings can be
changed:
3
•
•
•
•
•
•
Application linked to ScanSnap
Folder to save scanned images to
Name of file to save scanned images to
Format of file for scanned image (*.pdf/*.jpg)
Document size
Scan mode (draft, high quality, reduce noise of back side image, auto-
matically remove blank pages)
•
•
Size of file for scanned image
The compression ratio of scanned images
The scanning scale may varies slightly.
• With Adobe Acrobat 6.0, scanned Images (saved as a PDF file) can be pro-
cessed with the following functions:
-
Convert a scanned page to searchable text
From the menu, select [Document] - [Paper Capture] -
[Start Capture...]
*)In case of using colored images, verify that the image has been
scanned in "Better" or "Best" scanning quality mode before perform-
ing this operation. (please refer to page 42)
Reduce PDF file size
-
From the menu, select [File] -[Reduce File Size]
For details on how to use the above functions, please refer to the [Acrobat 6.0
Help]
Download from Www.Somanuals.com. All Manuals Search And Download.
I Turning the Scanner ON/OFF
ScanSnap can be turned on/off performing the following actions:
• Turning on/off the PC,
• Opening/closing the paper chute cover of the scanner.
In general, you do not need to turn on/off the scanner when it is connected to your PC.
Turning off your PC or closing the paper chute cover....
The lamp on the scanner goes off and the scanner is turned off.
Turning on your PC or opening the paper chute cover....
The lamp on the scanner lights up and the scanner is turned on.
To turn off the scanner when the paper chute cover is opened, push the [POWER] button on the
scanner.
When you turn off/on the scanner, press the [POWER] button for longer than
HINT
one second.
*For preventing mis-operation, the [POWER] button does not work unless it is pressed
for longer than one second.
• Depending on your PC, the ScanSnap scanner is initialized several times
ATTENTION
while starting up the PC.
• It may take two to three minutes for tuning off the lamp on the scanner
v
depending on your PC.
* This is due to the specification of the computer, not to malfunction of the scan-
ner.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.1 Flow of Operations
I End of Operation
Closing "ScanSnap Manager"
Operation
S
Right-click "ScanSnap Manager" icon
on the task tray, and select "Exit" from the menu.
"ScanSnap Manager" is necessary for operation ScanSnap. When you start up
"ScanSnap Manager", select [All Programs] - [ScanSnap Manager] - [Scan-
Snap Manager].
HINT
(*Generally, "ScanSnap Manager" does not need to be ended.)
3
Disconnecting the scanner
Operation
1. Close the paper chute cover to turn off the scanner.
⇒ The "ScanSnap Manager" icon in the task tray changes from the "activated" symbol to
the "deactivated" one.
2. Disconnect the USB cable from your PC.
3. Disconnect the AC cable from the power outlet.
The power of the scanner is controled by turning on/off of the PC or opening/
HINT
closing of the paper chute cover. In general you do not have to turn on/off the
scanner when it is connected to your PC.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Scanning Different Document Types
The table below summarizes the types of documents that can be scanned on this scanner.
Paper commonly used in offices,
Media
Post card, Business card
2
2
Weight
52 g/m to 127 g/m (14 lb to 28 lb)
Legal
A4
(8.5 in. × 14 in.)
(210 mm × 297 mm)
(8.5 in. × 11 in.)
(182 mm × 257 mm)
(148 mm × 210 mm)
(128 mm × 182 mm)
(105 mm × 148 mm)
(100 mm × 148 mm)
(55 mm × 90 mm)
Letter
B5
A5
Size
B6
A6
Post card
Business card
Custom
Width: 50.8 to 216 mm (2 to 8.5 in.)
Length: 50.8 to 360 mm (2 to 14.17 in.)
Do not use the following documents:
HINT
• Documents with paper clips or staples
• Documents on which the ink is still wet
• Documents larger than Legal (width: 8.5 in., length: 14 in.)
• Documents smaller than 2 (width) x 2 (length) inches
• Materials other than paper such as fabric, metal foil, or transparencies
2
2
• Documents thinner than 52 g/m (14 lb) and thicker than 127 g/m (28 lb)
• Carbon paper
• Photosensitive paper
The following documents may not be scanned successfully:
• Documents of non-uniform thickness (e.g. envelopes, etc.)
• Wrinkled or curled documents
• Folded or torn documents
• Tracing paper
• Coated paper
• Perforated or punched documents
• Documents that are not square or rectangular
• Documents of non-uniform width
• Carbonless paper
Download from Www.Somanuals.com. All Manuals Search And Download.
3.2 Scanning Different Document Types
• To prevent the rollers from getting dirty, avoid scanning documents containing
large areas written or filled with pencil. If the scanning of such documents is
inevitable, clean the rollers more frequently. For details please refer to "6.2
Cleaning the Scanner Exterior" (page 93).
ATTENTION
• Carbonless paper contains chemical substances that may harm the Pad ASSY
or rollers (e.g. Pick roller) when documents are fed. Pay attention to the follow-
ing:
• Clean the Pad ASSY or rollers as frequently as possible.
• The service life of the scanner may be shortened compared with the case
of scanning woodfree paper.
• When scanning photos on the scanner, they may get scratched on their sur-
faces.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Loading Documents
This section describes how to load documents onto the scanner.
I How to load documents
1. Align the edges of the document.
Align the edges of the document as follows:
1) Straighten the edges of the document.
Straighten both edges of the document stack for scanning it correctly.
2) Check the number of the sheets in the document stack.
The standard number of sheets that can be loaded on the scanner is as follows:
-A4-size paper or smaller that makes a document stack or 5mm or less (50 sheets
at 64g/m2 or at 17 lb)
Scanning accuracy increases when
HINT
the document is loaded onto the
scanner so that the leading edges
Step-like
of the papers form a step-like pat-
tern as shown in the figure.
B a c k
Scanning direction
Before loading the document onto the scanner, fan it as follows:
1) Take out the stack of documents of thickness 5 mm or less.
2) Hold both ends of the document with both hands, and bend the documents into an
arch.
5mm
3) Firmly holding the document with both hands and bend back the document as fol-
lows so that the bent section rises up in the middle of the document.
4) Repeat steps 1) to 3) a few times.
5) Turn the document staple 90 degrees, hold the other two sides of the document, and
fan it again.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.3 Loading Documents
2. Load the document onto the paper chute cover.
Load the document so that the top side of the two-sided document (in the case of two or
more document sheets, the first page) faces towards the paper chute cover.
Reduce the quantity of the documents, when the thickness of stack exceeds the reference
marks on the side guides.
12345667890
ABCDEFG
G
Reference
mark
Paper chute cover
Side guide
3
Before loading long-sized documents, first pull out the extension of the paper
chute cover.
HINT
Extension
Paper chute cover
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Adjust the side guides to the document width.
Move the side guides so that there is no space between the document edges and the side
guides. If there is a space between the document edges and the guides, the scanned images
may be skewed.
Document
Side guide
If you use the stacker, scanned document sheets will not be separated when
HINT
they have passed through the scanner. For details on how to attach the stacker
to the scanner, refer to "Names and Functions of Parts" on page 3.
Use the stacker as follows.
1. Pull out the stacker towards you while holding it by its handle.
Stacker
Handle
2. Insert your finger into the indent and lift up the stacker extension to clap it
out.
Indent
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
3.4 Changing Scan Settings
All the operations of ScanSnap are controlled by the "ScanSnap Manager".
Generally, ScanSnap Manager is registered on the task tray and displayed as
S
.
Right-clicking this icon, the following menu appears. With this menu you can start the scanning,
configure settings for scanning, or checking consumables.
Start Duplex/Simplex scanning.
The "Scan and Save Settings" window
appears.
The "Check consumable supplies" window
appears.
3
Displays Help or the About window.
Exit ScanSnap Manager.
This section describes the settings on the "Scan and Save Settings" window.
The following settings can be changed:
• Application that is automatically started up after scanning on ScanSnap → [Application]
• Folder to save scanned images to → [Save]
• Scan mode (draft scan, high quality scan, scan in color mode, scan in B&W mode, reduce
noise of back side image, automatically remove blank pages) → [Scanning]
• Format of file for the scanned image → [File option]
• Document scan size → [Paper size]
• Size of the file when saving scanned images → [Compression]
The following describes how to change the settings.
Operation
1. Right click the "ScanSnap Manager" icon on the task tray and select [Setting...] from
the displayed menu.
⇒ The "Scan and Save Settings" dialog box is displayed.
Download from Www.Somanuals.com. All Manuals Search And Download.
You can launch "Scan and Save Settings" dialog box by simultaneously press-
ing [Ctrl] + [Shift] + [Space] or double clicking the icon on the task tray.
HINT
2. Change the scan settings on the "Scan and Save Settings" window.
The following describes the setting items of each of the tab panels.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
[Application] tab
3
I Application:
Specifies the application to be executed and linked to ScanSnap. The specified program
is started up after the document is scanned on ScanSnap. Click
tion.
to select the applica-
You can select one from the following applications:
• Scan to File (image data will be simply saved as files)
• Adobe®Acrobat®
• Adobe®Acrobat® Reader™ or Adobe® Reader®
• CardMinder
• The above applications automatically become selectable when they are cur-
rently installed. If they have been uninstalled, they are automatically no longer
displayed among the selection items.
HINT
• If you select "Scan to File (only saves image data as files)", the scanned
image is saved to file after the scanning is completed. The scanning result is
not displayed on screen. This setting is ideal when the scanning result needs
not be confirmed each time a document is scanned.
• If you select "CardMinder " at "Application:" on the [Application] tab, the [File
option], [Paper size] and [Compression] tabs are not displayed.
• When the CardMinder is started up, the application at "Application:" on the
[Application] tab automatically enters the mode specified by "CardMinder".
When you exit CardMinder, the original specified mode will be restored.
Download from Www.Somanuals.com. All Manuals Search And Download.
I [Add or Remove] button
Applications can be added or removed at "Application".
When you click the [Add or Remove] button, the following screen is displayed.
(Up to five applications can be registered.)
<To add an application>
1
2
Click the [Add...] button.
The following screen is displayed.
• Click the [Browse...] button, and select either the shortcut file (.lnk) of the applica-
tion to register or select the execution file (.exe).
⇒ The folder of the selected application is displayed at "Path".
• Enter the name to be displayed at "Name".
⇒ The name you entered is displayed at "Application:".
3
4
When you have finished the above setting, click the [OK] button.
The following screen is displayed and the new application is added. Click the
[Close] button to close the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
When you add an application, please select an application that is able to pro-
cess files of the following formats.
HINT
JPEG (*.jpg), PDF (*.pdf)
Scanned images cannot be displayed properly unless these file formats are
supported.
This can be confirmed by the following method:
<Example: To confirm if the selected application is able to process files of
JPEG format>
1. Create a shortcut for the application you wish to add.
2. Drag-and-drop any file in JPEG format (*.jpg) onto the shortcut.
⇒ If the application starts up and the file opens, the application supports
JPEG format files.
However, certain applications that satisfy the above requirements may not work
properly. In that case, start up the application first and then open the files cre-
ated by ScanSnap.
3
<To remove an application>
1
Select the application you want to remove in the "Add or remove application"
screen, and click the [Remove] button.
2
3
The confirmation screen will be displayed. Click the [Yes] button in this screen.
Confirm that the application has been removed, and then click the [Close] button.
<To change settings>
1
Select the application whose settings you wish to change in the "Add or remove
application" screen, and click the [Change...] button.
2
The "Setting of additional application" screen is dislpayed. Change the desired
items.
3
4
When you have finished the above setting, click the [OK] button.
The "Add or remove application" screen is displayed, and the settings are changed.
Click the [Close] button to close the screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
[Save] tab
I Folder path to save an image:
Specify the folder to save the scanned image to.
When you click the [Browse...] button, the "Browse for Folder" screen is displayed.
Select the folder to save the scanned image to and click the [OK] button.
The function "Make New Folder" is not provided for Windows 98.
ATTENTION
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
I [Filename format...] button
Set the name of the file to save the scanned image to.
When you click the [File name format...] button, the following screen is displayed.
The following three settings can be specified.
1
"Date and time (depending on the setting of your Operating System)"
Files are named according to the settings of the Operating System of your PC.
When there is any character not appropriate for file names, like (/;+,*>”<>|), such
character will be replaced by “-“ (hyphen).
3
2 "Date and time (YYYYMMDDhhmmss)"
Set the date and time for the file name when saving a scanned image to a file.
Example) When the file is saved in PDF format at 19:00:50 on December, 27, 2003, the
file name will become: 20031227190050.pdf
3
"Custom File Name:"
A file is named combining the text string entered at "File Name:" and the number
with the digits specified at "Counter".
(An example of a file name is displayed on the top of the screen.)
About "Counter:"
HINT
• When there is not another file with the same name as the one specified
at "File Name:" in the save destination folder (specified on the [Save]
tab), the counter becomes 1 (001 in the case of three digits). From then
on, the counter is incremented by one upon saving a new file.
• When there is a file having the same name in the save destination
folder, the counter becomes the smallest unused number.
Example) When files Scan01.pdf, Scan03.pdf, Scan04.pdf exist in the
folder, and the scanned image is saved to a file having the same name
from then on, the counter becomes Scan02.pdf, Scan05.pdf,
Scan06.pdf, Scan07.pdf and so forth.
•
When the specified number of digits is exceeded (for example, when
saving the 100 th file when two digits are specified.), the number of dig-
its is incremented by one.
Clicking the [OK] button enables the settings.
(An example of the file name that you set is displayed under the [File name format...]
button.)
Download from Www.Somanuals.com. All Manuals Search And Download.
[Scanning] tab
I Scanning quality:
Specify whether to scan documents quickly or at higher quality.
Select one of the following modes:
• Normal (Fastest)
Select this mode when you wish to scan documents quickly.
• Better (Faster)
Select this mode when you wish to scan documents at higher quality.
• Best (Slow)
Select this mode when you wish to scan documents at even higher quality.
• Excellent (Slower)
Select this mode when you wish to scan documents at the highest quality
Normal is equivalent of 150 dpi for color and 300 dpi for B&W, Fine is equiva-
lent to 200 dpi for color and 400 dpi for B&W, Best is equivalent to 300 dpi for
color and 600 dpi for B&W, and Excellent is equivalent to 600 dpi for color and
1200 dpi for B&W.
HINT
Generally, the higher the required scanning quality is specified, the longer it
takes to scan documents and the larger the file size becomes.
I Color mode:
Specify whether to scan documents in color or in black-and-white.
Select one of the following modes:
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
• Auto Color Detection (Automaticaly recognize each document color)
ScanSnap automatically recognizes whether the document to scan is colored or
black-and-white and switches the scan mode accordingly.
• Color
Scans the document in the color mode.
This setting is ideal for scanning colored documents.
• B&W
Scans the document in the B&W mode.
This setting is ideal for scanning black-and-white documents containing mostly
text. File sizes can also be kept smaller at the B&W setting compared to the color
mode.
Normally, set this setting item to "Auto Color Detection".
If this seting is specified, there is no need to change the color mode each
time you scan a document.
Please be noted that the color of the followings may be judged as black
and white:
HINT
3
- Faintly-toned paper
- Document which have a colored portion
To scan such documents in color, select "Color" at "Color mode".
I SCAN button:
Specifies the scanning mode that is launched when pressing the [SCAN] button
SCAN
on
the scanner.
Select [Duplex Scan] or [Simplex Scan] from the menu.
I [Option...] button
With this item you can configure other scanning related settings.
Clicking the [Option...] button displays the following screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
I Brightness (Black and White scanning only)
Sets the density for scanning black-and-white images.
Moving the slider control to the left will lighten the scanned image, while moving the
slider control to the right results in a darker scanned image.
* This setting item becomes available when "B&W" is currently selected at
"Color mode:" or when "Auto" is selected at "Color mode:" and black-and-
white documents are automatically recognized.
I Setting for text only document.
Mark the checkbox as follows according to the type of your document.
• Mark this checkbox when scanning documents containing printed or handwritten
text.
• Unmark this checkbox when scanning documents containing photographs.
* This setting item becomes available when "Color" is currently selected at
"Color mode:" or when "Auto" is selected at "Color mode:" and color docu-
ments are automatically recognized.
I Allow automatic blank page removal.
This setting automatically detects blank pages in the document stack and automatically
removes them from the output.
For example, when a stack of documents containing both two-sided and one-sided doc-
uments is scanned in Duplex mode, this feature removes only the back sides (i.e. blank
pages) of one-sided documents from the output images.
* No scanned images are output if all of the sheets in the document stack are rec-
ognized as blank pages.
Following documents may be accidentally recognized as blank pages:
ATTENTION
• Almost blank documents containing only a few characters
• Document of only one color (including black) and without any patterns,
lines, or characters
I Allow automatic image deskew.
This setting automatically detects skewed documents and correct them for the output
data. Up to +-5 degrees of skews can be corrected.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
This function judges a document skew based on the characters on the
document. So the detection may not work properly for the following kinds
of documents:
ATTENTION
• Documents on which the pitches of lines or characters are extremely
narrow, or characters are overlapped
• Documents which have many outline characters or using styles like that
• Documents with many photographs or figures and only a few characters
• Documents with a background pattern behind the characters
• Documents with characters printed in various direction (e.g. plans, etc.)
• Documents with long diagonal lines
• Documents with handwritten characters
*When you scan such documents, unmark the checkbox.
3
I Allow automatic image rotation.
This setting item automatically judges the orientation of a text on the document, and
automatically changes the orientation of the paper.
This function judges document skew based on characters on the docu-
ATTENTION
ment, so it does not work properly for the following document:
• Documents which have many extremely large/small characters
• Documents on which pitches of lines or characters are extremely narrow,
or characters are overlapped
• Documents which have many charcters that contact underlines or bor-
ders
• Documents which have many photographs or figures and a few charac-
ters
• Documents which have a background pattern behind characters
• Documents which have characters printed in various directions (e.g.
plans, etc.)
• Documents which have only capital characters
• Documents with handwritten characters
*When you scan such documents, unmark the checkbox.
Download from Www.Somanuals.com. All Manuals Search And Download.
[File option] tab
I Selecting the file option
Specify the type of file for the scanned image.
Click to select the file format. You can select one from the following file formats:
• PDF (*.pdf)
• JPEG (*.jpg)
"JPEG" setting is not available when "Auto Color Detection" or "B&W" is
ATTENTION
selected at [Color mode:] under [Scanning] tab.
File format is automatically changed to "PDF" whan you select "Auto
Color Detection" or "B&W" while "JPEG" setting is selected.
I [Option] button
This function is used for configuring detailed settings of PDF files. This button is
enabled when "PDF(*.pdf) is specified at [File format:]. Click [Option] button to dis-
play the following dialog box.
• "Generate one PDF file per scan"
Creates a merged PDF file of all the scanned images.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
• "Generate one PDF file per xx pages"
Creates a new PDF file at each set page.
When two or more files are created by one scanning, only the first file is
displayed on the screen.
ATTENTION
[Paper size] tab
3
I Paper size:
Specify the size of the document to be loaded on the scanner.
Click to select the size. The following paper sizes (W x L) can be selected.
• Automatic detection
• Letter (8.5 in. x 11 in.)
• Legal (8.5 in. x 14 in.)
• A4 (210 mm x 297 mm)
• A5 (148 mm x 210 mm)
• A6 (105 mm x 148 mm)
• B5 (182 mm x 257 mm)
• B6 (128 mm x 182 mm)
• Business card (90 mm x 55 mm, 55 mm x 90 mm)
• Post card (100mm x 148mm)
• Custom (up to 5 settings can be registered)
Download from Www.Somanuals.com. All Manuals Search And Download.
I [Custom...] button
With this funciton, you can register up to 5 customized document sizes at the [Paper
size:] menu. Clicking this button displays the following setting window:
‘
<When adding a customized document size>
1) Click the [Add...] button.
2) The following screen appears.
- Enter the document size within the range given below:
Width: 50.8mm to 216 mm (2 in. to 8.5 in.)
Height: 50.8mm to 360mm (2 in. to 14.17in.)
- Enter the name in [Name:].
⇒ The entered name is displayed in [Paper size:].
3) To complete the setting, click the [OK] button.
4) The customized document size will be registered.
Click [Close] to exit from the "Add or Remove Custom sizes" window.
<When deleting a customized document size>
1) In the "Add or Remove Custom sizes" window, select the document size to be
deleted and click the [Remove] button.
2) The confirmation messsage appears twice. Click [Yes] button in either case.
3) In the "Add or Remove Custom sizes" window, confirm that the selected document
size is deleted. Click [Close] to exit from the "Add or Remove Custom sizes" win-
dow.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
<When changing the settings>
1) In the "Add or Remove Custom sizes" window, select the document size to be
changed and click the [Change...] button.
2) Change the settings in [Additional custom size settings].
3) To complete the setting, click the [OK] button.
4) The screen returns to the "Add or Remove Custom sizes" window and the changes
are saved. Click [Close] to exit from the "Add or Remove Custom sizes" window.
When "Automatic detection" is specified, the scanner automatically detects the
document size and select an appropriate document size from the standard
sizes (except for customized document sizes) described in the previous page.
So there is no need to specify "Paper size" again to match the size of the
loaded document, which makes ScanSnap easier to use.
HINT
3
• When you select "Automatic detection" and load an A6 size document onto the
scanner, the document is sanned as "Post card" size.
ATTENTION
• Do not load documents with different sizes simultaneously onto the scanner.
When “Automatic detection” is selected, documents of none standard sizes are
also regarded and scanned as documents of a standard size (Letter, Legal, A4,
B5, A5, B6, A6, or Business card), that is closest to their actual length. To scan
these kinds of documents just in their sizes, select "Custom" in "Paper size:"
and then specify the document size in the dialog box that appears when you
click the [Custom...] button.
Download from Www.Somanuals.com. All Manuals Search And Download.
[Compression] tab
I Compression rate:
Control the compression rate to specify the size of the file for the scanned image.
The compression rate is controlled by moving the slider bar.
The larger the compression rate number is specified, the higher the compression rate is
set and the smaller the file size becomes.
When the compression rate is increased, the quality of scanned images
ATTENTION
deteriorates.
v
I Enable High Compression:
When this checkbox is marked, the compression rate increases compared to the ordi-
nary compression mehtod and the file sizes becomes even smaller.
This function compresses characters and backgrounds on the docu-
ATTENTION
ment separately. So using this function on the document which con-
tains almost text characters, the file size becomes smaller while
v
leaving the characters as they are. Meanwhile, this function is not
appropriate for scanning photographs or figures, because such draw-
ings are recognized as background and compressed as such, so the
qualities of such images will deteriorate.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.4 Changing Scan Settings
About the size of image data
HINT
The following table shows a rough guideline for calculating the size of
images when a single color document is scanned in the Simplex mode.
File type: PDF
Paper size: A4 (Brochure)
Color mode: Color
High
Compression
Compressionrate
Scan mode
1
2
3
4
5
Normal quality
Better quality
Best quality
784
1721
379
771
293
560
219
394
782
117
186
352
217
214
221
521
3775 1670 1167
17501 8090 5937 4272 1793
Excellent quality
3
Color mode: B&W
Compression rate
Scan mode
-
Normal quality
Better quality
Best quality
54
130
336
Excellent quality
1934
(unit: Kbytes)
* "High Compression" is effective in "Best quality" or "Excellent quality" mode
* For efficient use, set Compression/High Compression funcitons as follows:
-Setting Compression rate (1 to 5) reduces the file size when reading doc-
uments such as photographs or figures.
- Enabling High Compression reduces the file size even more when read-
ing documents with many characters in "Color" mode (at Best/Excellent).
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
When you use ScanSnap with the default settings, there is no need to configure the settings by
SCAN
yourself. All you need to do is simply pressing the [SCAN] button
to scan the documents,
save images with the optimized settings and display the scanned images on the screen without any
complicated operation.
However, you can also manually configure the settings as you need.
Picking up typical examples, this section describes how to scan documents for specific purposes,
how to edit scanned images, etc.
The default settings of ScanSnap are as follows:
HINT
• Scanning: Duplex
• Application: Adobe Acrobat
• Image saving folder: [My Pictures] folder
• Filename format: Use the Operating System Setting
• Scanning quality: Normal (Fastest)
• Color mode: Auto Color Detection (automatically judges whether the docu-
ment is "color" or "black and white")
• Scanning Option:
Brightness: Normal
Setting for text only document (in Color mode only): Disabled
Allow automatic blank page removal: Enabled
Allow automatic image deskew: Enabled
Allow automatic image rotation: Enabled
• File format: PDF (*.pdf)
• File format Option
PDF File Option: Generate one PDF file per scanning
• Paper size: Automatic detection
• Compression
Compression rate: 3
Enable High Compression: OFF
The settings above can be changed with the ScanSnap Manager.
For details, refer to the section "Changing Scan Settings" on page 35.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
I Scanning only one side of a document
SCAN
As the default setting, pushing [SCAN] button
on ScanSnap product starts scanning docu-
ments in "Duplex" mode. If you wish to start "Simplex" scanning by pressing the [SCAN] button,
please change the settings following the procedure below.
Operation
S
1. Right click the "ScanSnap Manager" icon
from the menu.
on the task tray and select "Setting"
3
2. Click [Scanning] tab and select [Simplex scan] at [SCAN button:].
3. Click [OK] button to close the window.
4. Load the document onto the scanner.
SCAN
5. Press the [SCAN] button
.
⇒ The document is scanned in the "Simplex" mode.
To return the setting to the "Duplex" mode, select [Duplex scan] in step 2
above. The selected setting is applied to further scans unless it will be changed
again.
HINT
Download from Www.Somanuals.com. All Manuals Search And Download.
I Scanning color document in black and white
As the default, ScanSnap automatically recognizes whether a document is black & white or
colored. Accordingly colored documents are scanned in the color mode, while black & white docu-
ments are scanned monochrome.
If you wish to scan colored document in black & white, change the settings following the proce-
dure below.
Operation
S
1. Right click the "ScanSnap Manager" icon
from the menu.
on the task tray and select "Setting..."
2. Click [Scanning] tab and select "B&W" at "Color mode:".
If you scan color documents in color, select "Color".
3. Click the [OK] button to close the dialog box.
4. Load the document onto the scanner.
SCAN
5. Press the [SCAN] button
.
⇒ Scanned images will be output in black and white.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
I Skipping blank pages
ScanSnap is able to recognize blank pages and remove them from the output data. When scanning
documents in "Duplex" mode, both sides of the documents are scanned regardless if their back-
sides are printed or not. Though the empty back sides are scanned, they are recognized as "blank"
and automatically removed, so they will not appear on the output data.
To change the setting, follow the procedure below.
Operation
S
1. Right click the "ScanSnap Manager" icon
from the menu.
on the task tray and select "Setting..."
3
2. Select the [Scanning] tab and click the [Option...] button.
3. Mark the [Allow automatic blank page removal] check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Click the [OK] button to close the window.
⇒ The setting is enabled from next scanning.
Following kinds of documents may be accidentally recognized as blank pages:
ATTENTION
• Almost blank documents containing only a few characters
• Documents of only one color (including black) and without any patterns, lines,
or characters
*When you scan such documents, unmark the checkbox.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
I Deleting pages from a PDF file
Unnecessary pages of a document which has been scanned and saved as PDF files can be deleted
with Adobe Acrobat 6.0.
When a blank page could not be skip with [Allow automatic blank page removal] function (page
55), or you want to delete another unnecessary page, please follow the procedure below.
Operation
1. With Adobe Acrobat, open the PDF file targeted for this operation.
2. From the menu bar, select [Document] - [Pages] - [Delete].
3
3. Specify the page number of the page(s) you want to delete and click the [OK] button.
⇒ The specified page is deleted.
For details of this function, please refer to "Adobe Acrobat Help".
HINT
Download from Www.Somanuals.com. All Manuals Search And Download.
I Correcting skewed documents
ScanSnap is able to automatically correct document skews. To change the setting, follow the pro-
cedure below.
Operation
S
1. Right click the "ScanSnap Manager" icon
from the menu.
on the task tray and select "Setting..."
2. Select the [Scanning] tab and click the [Option...] button.
3. Mark the [Allow automatic image deskew] check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
4. Click the [OK] button to close the window.
⇒ The setting is enabled from next scanning.
Up to +-5 degrees of skews can be corrected.
ATTENTION
This function judges a document skew based on the characters printed on the
document, so it may not work properly for the following document:
• Documents on which the pitches of lines or characters are extremely narrow,
or characters are overlapped
• Documents with many outline characters or characters like this style
• Documents with many photographs or figures and only a few characters
• Documents with a background pattern behind characters
• Documents on which characters are printed in various direction (e.g. plans,
etc.)
• Documents with long diagonal lines
• Documents with handwritten characters
*When you scan such documents, unmark the checkbox.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I Correcting the orientation of scanned images
Depending on the documents, there may exist some pages of an orientation differing from the oth-
ers. For example, it is often seen that a document has portrait pages for text contents and landscape
pages for tables. For the case of double-sided documents in calendar style, their backsides are
printed upside down.
ScanSnap is able to automatically correct the orientation of scanned images for such a document.
To change the setting, follow the procedure below.
Operation
S
1. Right click the "ScanSnap Manager" icon
from the menu.
on the task tray and select "Setting..."
2. Select the [Scanning] tab and click the [Option...] button.
3. Mark the [Allow automatic image rotation] check box.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
4. Click the [OK] button to close the window.
⇒ The setting is enabled from next scanning.
This function judges a document skew based on the characters printed on the
ATTENTION
document. So it may not work properly for the following kinds of documents:
• Documenst with many extremely large/small characters
• Documents on which the pitches of lines or characters are extremely narrow,
or characters are overlapped
• Documents with many charcters that contact underlines or borders
• Documents with have many photographs or figures and only a few characters
• Documents with a background pattern behind characters
• Documents on which characters are printed in various directions (e.g. plans,
etc.)
• Documents with only capital characters
• Documents with handwritten characters
*When you scan such documents, unmark the checkbox.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I Rotating the page view of a PDF file
Even after scanning a document and saving it as a PDF file, you can change the page view orienta-
tion of this PDF file with Adobe Acrobat.
When the [Allow automatic image rotation] function (page 60) fails to correct the orientation of a
page view, or you want change the orientation of any other page, please follow the procedure
below.
Operation
1. With Adobe Acrobat, open the PDF file targeted for this operation.
2. From the menu bar, select [Document] - [Pages] - [Rotate].
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
3. Specify the page in which you want to change the orientation and clic the [OK] button.
Direction: Specifies the angle and the direction of the rotation.
Page range: Specifies the page number of the pages you want to rotate.
⇒ The orientation of the specified page(s) is (are) changed.
3
For details of this function, please refer to "Adobe Acrobat Help".
HINT
Download from Www.Somanuals.com. All Manuals Search And Download.
I Saving scanned images as different files
ScanSnap product can save scanned images as different files at each set page.
For example, you can scan a batch of documents and create files for every single page.
To change the setting, follow the procedure below.
Operation
S
1. Right click the "ScanSnap Manager" icon
from the menu.
on the task tray and select "Setting..."
2. Select the [File option] tab and click the [Option...] button.
Make sure that "PDF(*.pdf)" is selected at [File format:].
ATTENTION
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
3. At "PDF File Option, select "Generate one PDF file per x page(s)" and enter a num-
ber.
One PDF file is created at each set page number.
In "Duplex" mode, two pages (front/back) are required per one sheet of a docu-
ment. It is recommended that you select the [Scanning] tab - [Option] button to
unmark [Allow automatic blank page removal]. If this function is enabled, there
may be gaps between the page numbers when the document has blank pages.
3
HINT
4. Click the [OK] button to close the window.
⇒ The setting is enabled from next scanning.
Download from Www.Somanuals.com. All Manuals Search And Download.
I Saving scanned images with a high compression rate
In addition to the ordinary compression function, ScanSnap features the "High Compression" func-
tion for reducing the size of scanned images. This function is designed for ordinary text documents
used in offices.
For example, piles of paper documents can be compacted into PDF files by scanning them with this
function.
To change the setting, follow the procedure below.
Operation
S
1. Right click the "ScanSnap Manager" icon
from the menu.
on the task tray and select "Setting..."
2. Select the [Compression] tab and mark the [Enable High Compression] check box.
This function is available only for saving images in PDF format. Make sure that
ATTENTION
"PDF(*.pdf)" is selected at [File format:].
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
3. Click the [OK] button to close the window.
⇒ The setting is enabled from next scanning
• This function compresses characters and backgrounds on the document sepa-
ATTENTION
rately. So using this function on documents containing almost text characters,
the file size becomes smaller while leaving the characters as they are. Mean-
while, this function is not appropriate for scanning photographs or figures,
because such drawings are recognized as background and compressed as
such, so the qualities of such images will deteriorate.
v
• When this function is enabled, [Compression rate:] setting under [Compres-
sion] tab is disabled.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I Merging scanned images into one PDF file
When you are scanning documents and saving them in PDF format, the following window
appears if the scanning is interrupted by a paper jam or another error.
In that case you can resume or abort the scanning by the following procedure.
Operation
To resume scanning:
1. Check the last page scanned on the "Message" window.
2. Load the unscanned pages back onto ADF.
3. Click [Resume scanning] button to restart the scanning.
To quit scanning:
1. Click the [Quit] button.
⇒ The following window appears.
2. Click [Yes] to delete the data that were scanned up to the interruption. Otherwise,
click [No] to save the data that were scanned up to the interruption. (*Click [Cancel]
not to quit but to return to the previous window.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
The [Resume Scanning] button may not be displayed on the window and an
error message like the example below may appear. In this case, it is not possi-
ble to resume scanning. So use Adobe Acrobat if you want to merge two
divided image files. (This operation is only available for files of PDF format.)
ATTENTION
3
The following shows the procedures for this operation:
1. Confirm the last page scanned on the "Message" window.
2. Click the [Quit] button, then the following window appears.
3. Click the [No] button to completely save the image (PDF file) scanned
before the interruption (this file is called "File A").
4. Scan the remaining documents that need to be scanned (this part is
called "File B").
5. Open "File A" with Adobe Acrobat.
6. From the menu bar, select [Document] - [Page] - [Insert].
Download from Www.Somanuals.com. All Manuals Search And Download.
7. Select "File B" in the "Select File to Insert" screen and click the [Select]
button.
ATTENTION
⇒The "Insert Pages" window will appear.
8. Select "After" from the Location menu and "Last" from Page radio buttons,
then click [OK].
Download from Www.Somanuals.com. All Manuals Search And Download.
3.5 Various settings according to your needs
I Converting scanned images to an editable text with OCR
If you scan a text document, you will get an image of the document, containing also all the signs,
letters and numbers. The system cannnot recognize the image data as Text. This means, that you
you are not able to edit the content of your document without using OCR (Optical Character Rec-
ognition).
You can convert such image data into editable text data by using OCR processing ("Paper Capture"
function) of Adobe Acrobat 6.0.
Operation
1. With Adobe Acrobat, open the PDF file you wish to convert.
2. Select [Document] - [Paper Capture] - [Start Capture] from the menu bar.
3
3. In the following window, configure the necessary settings, then click the [OK] button.
⇒ The characters on the image are converted into text data by the "Paper Capture" funciton.
For details of this function, refer to "Adobe Acrobat 6.0 Help".
HINT
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Scanning Business Cards
ScanSnap product comes with "CardMinder", an application software for managing business card
data.
Using CardMinder, you can convert business cards into image data, and create a database of busi-
ness cards by recognizing their image data using the OCR (Optical Character Recognition)
technology.
The following describes how to start CardMinder and how to scan business cards with it.
• For further details, refer to the "CardMinder User’s Guide". If CardMinder is
HINT
already installed on your PC, you can browse the User’s Guide by selecting
[Programs] - [CardMinder] - [CardMinder User’s Guide] from the Start menu.
(You can also browse the User’s Guide from the "Setup CD-ROM" startup
screen supplied with this scanner.)
• When "CardMinder" is selected at [Application:] under [Application] tab, the
[File option], [Paper size], [Scanning], and [Compression] tabs will not be dis-
played.
• When starting up CardMinder, "CardMinder" is selected at [Application:] under
[Application] tab. When CardMinder is closed, the setting will be reset to previ-
ous one.
I Scanning business cards
The following describes how to create scanned images of business cards on ScanSnap.
SCAN
In this example, the [SCAN] button
on the scanner is used to scan business cards.
Business cards can also be scanned by starting up CardMinder and clicking the
[Scan] button at the upper left of the window.
HINT
For details, refer to the "CardMinder User’s Guide."
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Scanning Business Cards
<Preparations>
Operation
S
1. Right click the "ScanSnap Manager" icon
ting...] from the menu that is displayed.
on the task tray, and select the [Set-
⇒ The "Scan and Save Settings" dialog box is displayed.
3
2. Select "CardMinder" at "Application:" under the [Application] tab.
⇒ Two tabs, [Application] and [Scanning], will be displayed.
"Scanning quality" and "Color mode" can be changed on the [Scanning] tab.
HINT
(Refer to "[Scanning] tab" on page 42.)
The defaults are "Best" and "Color" for the scan mode. (In this section, busi-
ness cards are scanned using these default settings.)
When CardMinder is selected as [Application:], the option "Excellent" on the
[Scanning] tab is not available.
3. Click the [OK] button.
⇒ This closes the "Scan and Save Settings" screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
<Scanning procedure>
Operation
1. Load the business cards onto the scanner.
• Load the business cards face down.
• When you scan two or more business card, set them in piles.
• Adjust the side guides so that they contact both sides of the business cards. If there is a space
between the business cards and the side guides, place the cards along the left side guide.
Paper chute cover
Business card
Side guide
[SCAN] button
SCAN
2. Press the [SCAN] button
on the scanner.
• As the default setting, documents are scanned at "Duplex" mode when you
press the [SCAN] button. Using "ScanSnap Manager", you can set the scan-
ner to scan documents in "Simplex" mode by pressing [SCAN] button.
HINT
S
• You can also start scanning with the "ScanSnap Manager" icon
task tray.
on the
*For details, refer to "3.4 Changing Scan Settings" (on page 35).
⇒ The scanning will be started. After the scanning has finished, the "CardMinder" screen is
displayed.
• Do not connect or disconnect other USB devices during the scanning opera-
ATTENTION
tion.
• Do not close the paper chute cover nor push [POWER] button on the scanner
v
during the scanning operation.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.6 Scanning Business Cards
Operation
3. Confirm the image data of the scanned business cards on the [CardMinder] main win-
dow.
Data list
Card image
3
Recognition result
The image data of scanned business cards are displayed on the right.
A list of already scanned business cards is displayed on the left.
Under the image data, the recognized characters are displayed.
4. Should there be any mistake of the recognition, please correct the data manually.
Correct the recognized characters, if they are different from image data.
For details on correcting recognized characters, refer to the "CardMinder
HINT
User’s Guide".
5. Select [Exit] from the [File] menu to end CardMinder.
For further details, refer to the "CardMinder User’s Guide". If CardMinder is
HINT
already installed on your PC, you can browse the User’s Guide by selecting
[Programs] - [CardMinder] - [CardMinder User’s Guide] from the Start menu.
(You can also browse the User’s Guide from the "Setup CD-ROM" startup
screen supplied with this scanner.)
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Viewing PDF File Thumbnails
ScanSnap comes with the plug-in application “PDF File Thumbnail View” which allows you to
use the Explorer for viewing thumbnails of the PDF data of scanned documents.
The following describes how to use the PDF File Thumbnail View.
• In order to use “PDF File Thumbnail View”, Adobe Acrobat 6.0 must be
ATTENTION
installed on your PC beforehand.
• Acrobat Reader does not support the “PDF File Thumbnail View”.
v
• "PDF File Thumbnail View" will be installed automatically after installing "Scan-
Snap Manager". ("PDF File Thumbnail View" will not be installed if your OS is
Windows 98 and Windows 98 Second Edition. Furthermore, the "PDF File
Thumbnail View" cannot be used on Windows Me, since this OS does not sup-
port Adobe Acrobat 6.0). For details, please refer to section "Before Installing
ScanSnap" (page. 6).
I Start the PDF File Thumbnail View
PDF File Thumbnail View is disabled as a default. First, enable this function following the
procedure below.
Operation
1. Click on the Start menu and select [Programs] - [PDF Thumbnail View] and then
[Configuration Tool].
⇒ The [PDF Thumbnail View Function Settings] screen is displayed.
2. Mark the [Enable] checkbox to enable the function, and Click [OK] button.
Download from Www.Somanuals.com. All Manuals Search And Download.
3.7 Viewing PDF File Thumbnails
3. Click the [OK] button.
⇒ “PDF Thumbnail View Function Settings” is enabled.
When uninstalling Adobe Acrobat, first disable the [PDF Thumbnail View Func-
ATTENTION
tion].
v
3
Download from Www.Somanuals.com. All Manuals Search And Download.
I Displaying thumbnails of PDF files
To view thumbnails (miniature) of PDF files, follow the procedure below.
1. Start the Explorer.
Right click the [Start] menu and select the [Explore].
2. Select a folder where PDF files of scanned images are stored.
Usually, PDF files created by ScanSnap are saved in the folder specified in [Image saving
folder:] under the [Save] tab of "ScanSnap Manager". (page 40)
3. Select [Thumbnails] from the [View] menu.
⇒ The thumbnails of the PDF files are displayed.
• The thumbnails of PDF files are refreshed every time the folder is opened.
ATTENTION
• Images of the PDF files are temporarily displayed on the upper left side of the
screen when refreshing the thumbnails.
v
• When there is a large quantity of PDF files saved in one folder, it may take
some time to display the thumbnails.
• The first page of a PDF file document is displayed as a thumbnail.
• The thumbnail of a PDF is not displayed when Adobe Acrobat is currently run-
ning.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 4
Uninstalling ScanSnap
"Uninstallation" removes the ScanSnap program files that were copied during the installation from
the hard disk to restore the system environment to its original state.
This chapter describes how to uninstall ScanSnap
4
4.1 Uninstalling Supplied Programs ......................................................................... 80
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1 Uninstalling Supplied Programs
Follow the procedure below to uninstall programs (ScanSnap Manager, CardMinder and PDF
Thumbnail View) supplied with ScanSnap.
1. Start up your PC.
When using Windows 2000 or Windows XP, log in as a user with "Administrator" privileges
(computer administrator privileges in the case of Microsoft Windows XP Home Edition
operation system).
2. Exit all currently running programs.
3. Select [Control Panel] - [Add or remove Programs] from the [Start] menu.
⇒ This displays the "Add or remove Programs" screen which displays a list of the currently
installed applications.
4. Select the application to uninstall.
(1) When uninstalling ScanSnap Manager
Select "ScanSnap Manager".
(2) When uninstalling CardMinder
Select "CardMinder V2.0".
(3) When uninstalling PDF Thumbnail View
Select "PDF Thumbnail View".
5. Click the [Change/Remove] button.
⇒ The "Confirm Uninstall" window appears.
6. Click the [OK] button.
In the case of CardMinder, a screen for confirming whether or not to leave
ATTENTION
the data or the execution environment is displayed.
To retain this data, click the [Yes] button. To remove the data, click the [No]
button.
⇒ This executes the uninstallation.
Download from Www.Somanuals.com. All Manuals Search And Download.
4.1 Uninstalling Supplied Programs
7. After the uninstallation is completed, click the [Finish] button as follows to close the
screen.
(1) For ScanSnap Manager and CardMinder
Select "Yes, I want to restart my computer now!" and click the [Finish] button.
(2) For PDF Thumbnail View
Click the [Finish] button.
Screen displays may vary slightly according to the operating system (OS) you
ATTENTION
are using. Follow the on-screen instructions of the OS.
Example: When the OS is Windows 2000
• "Add or Remove Programs" → "Add/Remove Applications"
• [Change/Remove] button → [Add/Remove] button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 5
Troubleshooting
This chapter describes how to remove jammed documents, remedy other troubles and how to
replace consumables.
5
5.1 Clearing Document Jams..................................................................................... 84
5.2 Troubleshooting Checklist................................................................................... 86
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Clearing Document Jams
If a document jam occurred during the scanning, follow the procedure below to remove the
jammed document.
CAUTION
• Open the ADF cover before removing the jammed document.
• Take care not to get injured when removing the jammed document.
• When removing the jammed document, be careful not to get neckties or necklaces entan-
gled in the scanner.
• The surface of the ADF glass becomes hot during operation. Take care not to get burned.
Clean the ADF referring the guidelines in "6.3 Cleaning the Inside of the Scan-
HINT
ner" (page 94).
Operation
1. Remove the document on the paper chute cover.
2. Open the ADF cover while pulling the cover open lever.
Paper chute cover
Cover open lever
ADF cover
Download from Www.Somanuals.com. All Manuals Search And Download.
5.1 Clearing Document Jams
3. Remove the jammed document.
4. Close the ADF cover.
Paper chute cover
5
ADF cover
⇒ You should hear the ADF cover click when it returns to its original position.
Make sure that the ADF is completely closed. Otherwise, paper jams or other
ATTENTION
feeding errors may occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Troubleshooting Checklist
This section describes common problems that may occur during the usage of ScanSnap and how to
remedy them.
Before you ask for repair service, please check the following items.
If you cannot solve the problem after checking the following items, contact an authorized
FUJITSU scanner service provider.
Symptom
Check This Item
Remedy
The scanner cannot be Is the AC/USB cable and
Correctly connect the AC/USB cable and AC
adapter.
turned on.
the AC adapter connected
correctly?
Disconnect and then re-connect the AC cable
and AC adapter.
Open the paper chute cover.
Is the paper chute cover
closed? (The scanner’s
power is controlled by
closing/opening the paper
chute cover.)
Please wait until Windows has started up
Is Windows normally
started up?
(This scanner’s power is
completely.
LED will turn off when Win-
dows is starting up or in the sleeping mode.
controlled by turning on/off
the computer.)
Press the [POWER] button.
Did you push the
[POWER] button to turn
off the scanner? (The
scanner can be turned off
by pressing [POWER]
button when the paper
chute cover is opened.)
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Troubleshooting Checklist
Symptom
Check This Item
Remedy
Scanning is not started. Is the USB cable connected Connect the USB cable correctly. (When a
correctly?
hub is used, check the hub’s power supply.)
Disconnect and then re-connect the AC cable
and AC adapter.
Does the
repeatedly?
LED light blink
Is ScanSnap Manager
started?
(If ScanSnap Manager is
started up successfully, the
"ScanSnap Manager" icon
If the "ScanSnap Manager" icon is not dis-
played, select from the [Start] menu [Pro-
grams] - [SnanSnap Manager] - [ScanSnap
Manager] to start up ScanSnap Manager.
S
appears on the task
tray.)
Is ScanSnap Manager run-
ning normally?
(If ScanSnap Manager is
not running normally, the
"ScanSnap Manager" icon
in the task tray is displayed
Please perform the following:
1. Disconnect and re-connect the AC cable
and AC adapter. If this does not change
the state, perform step 2.
2. If a USB hub is being used, directly con-
nect ScanSnap to your PC.
If this does not change the state, perform
step 3.
S
as
.
3. Restart your PC.
If none of the above operations resolves the
problem, uninstall and re-install ScanSnap
Manager.
5
Is the "Scan and Save Set-
tings" window still dis-
played?
Close the "Scan and Save Settings" window,
and scan the document.
Vertical lines appear in
the printed image.
Is the inside of the ADF
dirty?
Clean the inside of the ADF following the
instructions in "6 Daily Care" (page 91).
The printed image
Is the document loaded cor- Load the document correctly.
rectly?
shifts or is distorted.
The image is printed
white or dark.
Is for B&W scanning under
[Option...] the setting
"Brightness" in the [Scan-
ning] tab set extremely Light
or Dark?
Adjust "Brightness" at [Scanning] - [Option...]
in the "Scan and Save Settings" screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Check This Item
Remedy
The scanning speed is
very slow.
Does your PC satisfy the
recommended system
requirements?
Confirm the system requirements in " Before
Installing ScanSnap" (page 6).
Scanning speed will be slower whenever the
recommended CPU and memory require-
ments are not met.
If this is the case, at [Scanning] - [Option...] in
the "Scan and Save Settings" window, unmark
the boxes of the following to increase the
scanning speed.
• Allow automatic image deskew
• Allow automatic image rotation
Is the USB 1.1 connected?
If your PC has an USB 2.0 port, connect the
scanner to this port. (If using a USB hub, it
must also support USB 2.0 interfaces.) (*1)
Note: When using an
USB1.1 interface, the data
transfer rate may be slower
due to large data sizes.
Double-feeds (Note)
occur frequently.
Is the Pad ASSY dirty?
Clean the pad following the instructions in "6.3
Cleaning the Inside of the Scanner" (page 94).
Is the Pad ASSY worn?
Clean the Pad ASSY following the instructions
in "7.2 Replacing the Pad ASSY" (page 102).
Is the document stack
thicker than 5mm?
Reduce the number of sheets in the document
sheet to 5mm thickness or less.
Paper is not fed (stops
midway).
Is the Pick roller dirty?
Clean the Pick roller following the instructions
in "6.3 Cleaning the Inside of the Scanner"
(page 94).
Is the Pick roller worn?
Clean the Pick roller following the instructions
in "7.3 Replacing the Pick Roller" (page 105).
Are there any debris on the
document feeding path?
Remove any debris from the document feed-
ing path. (Refer to "5.1 Clearing Document
Jams" (page 84).
The scanner is not
recognized even if
ScanSnap Manager is
installed.
Did you connect the scan-
ner to your PC before
installing ScanSnap Man-
ager?
On the [Start] menu, select [Control panel] -
[System] - [Hardware] - [Device Manager].
Delete the "Other Device" selection in the
[Device Manager] and restart your PC.
Is the scanner registered as
"Other device" in the
"Device Manager"?
The file size of a
Is the B&W document
Select "B&W" at [Color mode:] on the [Scan-
scanned black & white
image is the same as
for a color document.
scanned in the color mode? ning] tab in the "Scan and Save Settings" win-
dow.
The back side of the
document appears in
the scanned image
when scanning a two-
sided document (noise
of the back side
Is the "Setting for text only
document." checkbox
unmarked at [Option...] on
the [Scanning] tab in the
"Scan and Save Settings"
window?
Mark the "Setting for text only document."
checkbox. (Available only in color mode).
image).
Download from Www.Somanuals.com. All Manuals Search And Download.
5.2 Troubleshooting Checklist
Symptom
Check This Item
Remedy
When "Allow automatic
blank page removal" is
enabled, almost blank doc-
uments with only a few
characters may be acci-
dentally recognized as
blank pages and removed
from scanned image data.
Scanned images are
not displayed on the
screen (when"Allow
automatic blank page
removal" is enabled).
Right click "ScanSnap Manager" icon on the
task tray, select [Setting...] - [Scanning] tab
and click the [Option...] button. Then unmark
the "Allow automatic blank page removal"
check box.
Scanned images are
skewed (when "Allow
automatic image
Are the documents fed into
the ADF with a skew of +-5
degrees?
The "Allow automatic image deskew" function
can correct skewed images upto +-5 degrees.
Load the document onto the scanner so that
the document skew does not exceed this limit.
deskew" is enabled).
Depending on the contents
of document, the automatic
image deskew may not work
properly.
Refer to " Allow automatic image deskew."
(page 44)
Scanned images are
skewed (when "Allow
automatic image rota-
tion" is enabled).
Depending on the contents
of document, the automatic
image rotation may not work
properly.
Refer to " Allow automatic image rotation."
(page 45)
(*1): To confirm whether the scanner is connected with USB1.1 or USB2.0, right-click ScanSnap icon on
the task and select [Help] - [About ScanSnap Manager], then click [Detail] button on [Version Informa-
tion] window. [USB type] is displayed in [Scanner information].
5
Note) "Double-feed" is a phenomenon where two or more sheets are fed into the scanner in a single
operation.
* Visit our Web site for your reference. Other useful information will be posted on the FAQ corner at the
following Web site.
http://scansnap.fujitsu.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 6
Daily Care
This chapter describes how to clean ScanSnap.
WARNING
Fire/Electric Shock
Before you clean the scanner, turn off the scanner and dis-
connect the AC adapter from the power outlet.
6
6.1 Cleaning Materials ................................................................................................ 92
6.2 Cleaning the Scanner Exterior............................................................................. 93
6.3 Cleaning the Inside of the Scanner..................................................................... 94
Download from Www.Somanuals.com. All Manuals Search And Download.
6.1 Cleaning Materials
Cleaning Materials
Parts No.
Remarks
1 bottle (100ml)
Cleaner F1
CA99501-0013
Moisten a cloth with this fluid
and wipe the scanner clean.
(*1)
Lint-free dry cloth
Commercially available. (*2)
*1) To purchase cleaning materials, contact the FUJITSU scanner dealer where you pur-
chased the scanner.
*2) Any lint-free cloth can be used.
Download from Www.Somanuals.com. All Manuals Search And Download.
6.2 Cleaning the Scanner Exterior
6.2 Cleaning the Scanner Exterior
Clean the scanner exterior and the ADF paper chute cover with a cloth moistened with a small
amount of Cleaner F1 or any neutral detergent.
• Never use paint thinner and other organic solvents.
ATTENTION
• During the cleaning, prevent water or moisture from getting inside the scanner.
• Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
Cloth
Cleaner F1 or
neutral detergent
Paint thinner
6
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 Cleaning the Inside of the Scanner
Clean inside of the scanner with a cloth moistened with Cleaner F1.
In an alternating succession of scanning documents, the accumulated paper-powder and dust inside
the scanner causes a scanning error.
As a guideline, clean the ADF every 1,000 scans. Note that this guideline varies according to the
type of the documents you are scanning. For example, the ADF must be cleaned more frequently
when scanning documents on that the toner has not been sufficiently fixed on.
Clean the ADF according to the following procedure referring to the illustrations on the following
page.
CAUTION
The glass surface inside the ADF becomes hot during the scanner operation.
Before you start to clean the inside of the scanner, disconnect the AC adapter from the outlet
and wait at least 15 minutes to let the scanner cool down.
• Do not use water or neutral detergent to clean the inside of the scanner.
ATTENTION
• Do not use aerosol sprays to clean the scanner. Aerosol sprays cause dirt and
dust to enter the scanner, resulting scanner failure and malfunction.
1. Open the ADF while pulling the cover open lever.
Paper chute cover
Cover open lever
ADF cover
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 Cleaning the Inside of the Scanner
2. Clean the following locations with a cloth moistened with cleaner F1.
Pad ASSY
Plastic roller
Pick roller
Feed roller
Glass
Eject roller
6
Turn off the scanner before cleaning the following locations.
• Pad ASSY (x 1)
Wipe the Pad ASSY downwards. When cleaning the Pad ASSY, take care to prevent the
cloth from catching on the metal parts.
• ADF glass surfaces (x 2 located on the ADF cover and the opposite side)
Clean lightly.
• Pick roller (x 1)
Clean lightly taking care not to scratch the surface of the roller. Take particular care in
cleaning the Pick roller since black debris on the roller adversely affect the pickup perfor-
mance.
• Plastic rollers (x 4)
Clean them lightly while rotating the rollers with your finger. Take care not to roughen the
surface of the rollers. Take particular care in cleaning the plastic rollers since black debris
on the rollers adversely affect the pickup performance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Turn on the scanner before cleaning the following locations, and clean the following rollers
while rotating them.
• Feed rollers (x 2)
Clean lightly taking care not to roughen the surface of the rollers. Take particular care in
cleaning the feed rollers since black debris on the rollers adversely affect the pickup perfor-
mance.
• Eject rollers (x 2)
Clean lightly taking care not to roughen the surface of the rollers.
Take particular care in cleaning the discharge rollers since black debris on the rollers
adversely affect the pickup performance.
To rotate the feed rollers and the eject rollers, press the [POWER] button while holding
down the [SCAN] button.
As a guideline, six presses of the [POWER] button make the rollers to rotate one full turn.
1. While holding down the [SCAN]
button....
N
R
2. ...press the [POWER] button.
⇒
The rollers rotate.
DUPLEX
COLOR
2
1
.
Connect the AC adapter and AC cable only when cleaning the feed rollers and
eject rollers.
ATTENTION
Download from Www.Somanuals.com. All Manuals Search And Download.
6.3 Cleaning the Inside of the Scanner
3. Close the ADF.
Paper chute cover
ADF cover
After closing the ADF, make sure that it is completely closed. Otherwise, paper
jams or other feeding errors may occur.
ATTENTION
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Chapter 7
Replacing Consumables
This chapter describes how to replace consumables.
WARNING
Fire/Electric Shock
Before you replace the consumables, turn off the scanner and disconnect the AC adapter
from the power outlet.
7
7.1 Replacing Consumables .................................................................................... 100
7.2 Replacing the Pad ASSY.................................................................................... 102
7.3 Replacing the Pick Roller................................................................................... 105
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1 Replacing Consumables
This section describes how to replace consumables.
I Part Nos. and Replacement Cycle of Consumables
The following tables list the part numbers of consumables and rough guidelines for replacing these
parts.
Standard Replacement
No.
Description
P/N
Cycle
1
fi-5110EOX Pad ASSY PA03360-0002
50,000 sheets or one year
2
fi-5110EOX Pick roller
PA03360-0001
100,000 sheets or one year
These replacement cycles are rough guidelines for the case of using A4/Letter wood-free paper 64
g/m2 (17 lb). So it may differ according to the paper being used.
Use only the consumables specified by PFU LIMITED. Do not use consumables and parts made by
other manufacturers.
Download from Www.Somanuals.com. All Manuals Search And Download.
7.1 Replacing Consumables
By the following procedure, you can create a rough guideline for replacing con-
sumables and for estimating how many sheets have been already scanned.
1. Rigth click the "ScanSnap Manager" icon on the task tray.
HINT
2. Click [Check consumable supplies...] at the menu.
⇒ The screen ("Check consumable status" screen) is displayed. This screen
indicates how many times consumables have been used.
7
Replace consumables referring to "Target value to change supplies" as a rough
guideline.
For details about purchasing consumables, visit the following website or con-
tact the Fujitsu scanner dealer where you purchased your scanner.
[Website] http://scansnap.fujitsu.com/
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 Replacing the Pad ASSY
Replace the Pad ASSY following the procedure below.
1. Remove the documents on the paper chute cover.
2. Open the ADF while pulling the cover open lever.
Paper chute cover
Cover open lever
ADF cover
3. Remove the Pad ASSY.
Pull out the Pad ASSY in the direction of the arrow while pinching both ends of the Pad
ASSY.
Pad ASSY
ADF cover
Download from Www.Somanuals.com. All Manuals Search And Download.
7.2 Replacing the Pad ASSY
4. Attach the new Pad ASSY.
Pad ASSY
ADF cover
Make sure that the Pad ASSY is completely attached. Otherwise, document
jams or other feeding errors may occur.
ATTENTION
5. Close the ADF.
7
Paper chute cover
ADF cover
⇒ You should hear the ADF click when it returns to its original position.
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Turn on the scanner.
7. Right click the "ScanSnap Manager" icon on the task tray, and select [Check consum-
able supplies...] from the menu.
⇒ This displays the "Check consumable status" window.
8. In the "Check consumable status" window, click the [Reset] button of the consumable
you replaced.
⇒ The counter is reset to "0".
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Replacing the Pick Roller
7.3 Replacing the Pick Roller
Replace the Pick roller following the procedure below.
1. Remove the documents on the paper chute cover.
2. Open the ADF while pulling the cover open lever.
Paper chute cover
Cover open lever
ADF cover
3. Remove the sheet guide.
Pinch the knobs on the sheet guide and pull the sheet guide to remove it.
Sheet guide
Handle
7
Claw
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Rotate the pick roller bushing (left).
Pick roller bushing
Pick roller
Pick roller shaft
5. Remove the pick roller with its shaft.
Hold the left part of the shaft, and raise it to remove the shaft from the scanner while pulling
the shaft to the left.
Pick roller shaft
Pick roller
If the around the pick roller is dirty by paper-powder, it may cause a scanning
ATTENTION
error. Please remove the dirt using a dry cloth with dollop of Cleaner F1.
* Don't use water, mild detergent or air-spray.
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Replacing the Pick Roller
6. Remove the pick roller from it’s shaft.
Pull out the shaft from the pick roller while lifting up its tab.
Tab
Shaft
Pick roller
If you push up the pick roller tab using your fingernail, it may heart or get
ATTENTION
chipped your fingernail. If you worry about that, you push up the pick roller tab
using a paper clip.
1
2
7
7. Attach the new pick roller to the shaft.
Insert the new pick roller aligning the protrusion with the slot on the pick roller.
Pick roller
Protrusion
Shaft
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Install the pick roller with it’s shaft to the scanner.
Insert the right end of the shaft to the roller bushing (right), and set the shaft to the slot while
lowering it.
Pick roller shaft
Pick roller
9. Rotate the roller bushing (left) by rotating it in the direction of the arrow.
Pick roller bushing
Pick roller
Pick roller shaft
Make sure that the Pick roller is completely attached. Otherwise, document
ATTENTION
jams or other feeding errors may occur.
Download from Www.Somanuals.com. All Manuals Search And Download.
7.3 Replacing the Pick Roller
10. Attach the sheet guide to the scanner.
Pinch the knobs on the sheet guide and attach it to the scanner.
Sheet guide
Handle
Craw
⇒ The sheet guide makes a clicking sound when the knobs fix into position.
Make sure that the sheet guide is completely attached. Otherwise, document
jams or other feeding errors may occur.
ATTENTION
11. Close the ADF.
7
Paper chute cover
ADF cover
⇒ You should hear the ADF click when it returns to its original position.
12. Turn on the scanner.
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Right click the "ScanSnap Manager" icon in the task tray, and select [Check consum-
able supplies...] from the menu.
⇒ This displays the "Check consumable status" window.
14. In the "Check consumable status" window, click the [Reset] button of the consumable
you replaced.
⇒ The counter is reset to "0".
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix A
Installation Specifications
The following table summarizes the installation specifications of this scanner.
Item
Specifications
Dimensions
(Note)
Width
Depth
Height
Minimum
284 mm
11.18 in.
146 mm
5.75 in.
150 mm
5.91 in.
Maximum
284 mm
11.18 in.
480 mm
18.90 in.
302 mm
11.89 in.
Weight
2.7 kg (approxiamtely 5.95 lb)
100 - 240 V
Input power
supply
Voltage
Number of
phases
Single-phase
Frequency
50/60 Hz
Power con-
sumption
During
operation
27 W or less
During standby
Scanner state
8 W or less
Temperature/
Humidity
During operation
During standby
During storage/
transportation
Allowable
Ranges
Temperature
Humidity (%)
5 to 35 (°C)
41 to 95 (°F)
-20 to 60(°C)
-4 to140 (°F)
-20 to 60(°C)
-4 to 140 (°F)
A
20-80
8-95
8-95
Note) Dimensions
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Connecting ScanSnap .............................17
Connecting the AC adapter .....................17
Connecting the USB Cable .....................18
Consumables ........................................100
Correcting skewed documents ................58
Correcting the orientation of scanned images 60
Cover open lever ...................................3, 4
Custom size .............................................48
A
About the size of image data .................. 51
AC adapter connector ............................... 4
ADF cover ................................................. 3
Allow automatic blank page removal ...... 44
Allow automatic image deskew ............... 44
Allow automatic image rotation ............... 45
Application tab ........................................ 37
Auto scanning ......................................... 43
Automatic detection ................................ 47
D
DAILY CARE ...........................................91
default settings ........................................52
Deleting pages from a PDF file ...............57
deskew ....................................................44
Document types ......................................30
B
B&W scanning ........................................ 43
Before installing ScanSnap ....................... 6
Best quality ............................................. 42
Better quality ........................................... 42
Brightness ............................................... 44
Business Cards ....................................... 72
E
Excellent quality ......................................42
F
C
File name settings ...................................41
File option tab ..........................................46
Flow of Operations ..................................24
Folder path to save image .......................40
CardMinder ............................................. 73
Changing Scan Settings ......................... 35
Cleaner F1 .............................................. 92
Cleaning cycle ......................................... 94
Cleaning Materials .................................. 92
Cleaning the ADF .................................... 94
Clearing Document Jams ........................ 84
Color scanning ........................................ 43
Compression rate .................................... 50
Compression tab ..................................... 50
H
High Compression ...................................50
high compression ....................................66
Download from Www.Somanuals.com. All Manuals Search And Download.
Preface ....................................................viii
I
image rotation ......................................... 45
Installation Specifications ...................... 111
Installing Adobe Acrobat ........................... 8
Installing CardMinder .............................. 11
Installing PDF Thumbnail View ............... 11
Installing ScanSnap Manager ................. 11
R
Regulatory Information .............................. v
Replacing the Pad ASSY ......................102
Replacing the Pick Roller ......................105
Rotating the page view of a PDF file .......62
S
L
Safety Precautions ................................... xi
Save tab ..................................................40
Saving scanned images as different files 64
Scan and Save Settings ..........................35
SCAN button .............................................4
Scanning Business Cards .......................72
Scanning color document in black and white ..54
Scanning only one side of a document ...53
Scanning tab ...........................................42
ScanSnap Setup .....................................12
Select application ....................................37
Select color mode ....................................42
Select scanning mode .............................42
Selecting the file option ...........................46
Setting for text only document .................44
Setup .......................................................12
Side guide .................................................3
side guide ................................................34
Skipping blank pages ..............................55
Stacker ................................................3, 34
Loading Documents ................................ 32
M
Media ...................................................... 30
menu ....................................................... 35
Merging scanned images ........................ 68
N
Normal quality ......................................... 42
O
Operation Button ....................................... 4
P
Package .................................................... 2
Pad ASSY ............................................. 100
Paper Capture ......................................... 71
Paper chute cover ..................................... 3
Paper size ......................................... 30, 47
Paper size tab ......................................... 47
PDF File Thumbnail View ....................... 76
PDF Option ............................................. 46
Pick roller .............................................. 100
POWER button ......................................... 4
Power lamp ............................................... 4
T
Troubleshooting .......................................83
Troubleshooting Checklist .......................86
Download from Www.Somanuals.com. All Manuals Search And Download.
U
Uninstalling ScanSnap ............................ 79
Uninstalling Supplied Programs .............. 80
USB 2.0 ..................................................... 7
USB connector .......................................... 4
W
Weight ..................................................... 30
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Repairs
Contact the store where you purchased your FUJITSU Image scanner of the fi series or an
authorized service provider for performing repairs of this product.
• The user must not performe any repairs of the scanner.
• Repair parts for this scanner are retained for five years from discontinuation of the produc-
tion of this product.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
ScanSnap fi-5110EOX Operator’s Guide
P3PC-E817-02EN
Date of issuance: February, 2004
Issuance responsibility: PFU LIMITED
z The contents of this manual are subject to change without notice.
z PFU LIMITED assumes no liability for incidental or consequential
damages arising from the use of this manual, and any claims by a
third party.
z Copying of the contents of this manual in whole or in part and
copying of the scanner application is forbidden under the copyright
law.
z Missing or wrongly collated pages will be supplied free of charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
EdgeStar Beverage Dispenser TWR125SS User Manual
Euro Pro Vacuum Cleaner EP903 User Manual
Extron electronic Home Theater System ADA 6 COMPONENT User Manual
Fisher Paykel Cooktop 599127 User Manual
Fisher Price Motorized Toy Car 74765 User Manual
GE Clothes Dryer DCCD330EGWC User Manual
GE Oven JKS1027 User Manual
GE Telephone 29267 User Manual
Gianni Industries Door FDH 100M User Manual
Gianni Industries Switch CP 22 Series User Manual