P3PC-2712-01EN
Getting Started
Thank you for purchasing ScanSnap S1300 (hereinafter referred to as "the ScanSnap").
This manual describes the preparation required for use of the ScanSnap. Follow the preparation procedures
described in this manual.
Make sure to read the "Safety Precautions" document provided with the ScanSnap before use.
For details about ScanSnap functions and features, basic operation, daily care, consumable replacement and
troubleshooting, refer to the "Operator's Guide" (PDF). The "Operator's Guide" is available on the Setup DVD-
ROM.
<Trademarks>
Microsoft, Windows, Windows Vista, PowerPoint, and SharePoint are either registered trademarks or trademarks of Microsoft
Corporation in the United States and/or other countries.
Apple, the Apple logo, Mac, Mac OS, iPhoto, and Rosetta are trademarks of Apple Inc.
Intel, Pentium, and Intel Core are trademarks or registered trademarks of Intel Corporation in the United Sates and other
countries.
PowerPC is a trademark of International Business Machines Corporation in the United States, other countries, or both.
ScanSnap, the ScanSnap logo, CardMinder, and Rack2-Filer are registered trademarks or trademarks of PFU LIMITED in
Japan.
Other company names and product names are the trademarks or registered trademarks of the respective companies.
All Rights Reserved, Copyright © PFU LIMITED 2009
Checking the Components
Make sure that all items shown below are included in the package. If any other packaging is provided, make sure
to store it as well. Make sure to handle the components with care.
The box and packaging materials are required for storage and transportation of the ScanSnap. Do not throw them
away. If anything is missing or damaged, contact your FUJITSU scanner dealer or an authorized FUJITSU
scanner service provider.
Getting Started (× 1)
(This manual)
Safety Precautions (× 1)
ScanSnap (× 1)
USB cable (× 1)
USB bus power cable
(× 1)
AC cable (× 1) (*)
AC adapter (× 1)
Setup DVD-ROM
(× 1)
Rack2-Filer (× 1)
(Exclusive to S1300 with
Rack2-Filer)
(*) The contents may vary depending on the
country and the ScanSnap model purchased.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
6. Confirm that all required software are
z
z
z
If the CPU and the memory do not meet the
required specifications, scanning speed will
slow down.
When the font size is large, some screens may
not be displayed properly. In that case, use a
smaller font size.
selected, and click the [Next] button.
The actual increase in used disk space after
installation and the required disk space for
installation may differ from each other
®
depending on your Windows system disk
management.
Prepare the Setup DVD-ROM.
Installing ScanSnap Manger is
necessary.
1. Turn on the computer and log on as a user
with Administrator privileges.
D
The [Choose Destination Location] dialog box
appears.
2. Insert the Setup DVD-ROM into the DVD-
ROM drive.
7. Choose the destination folder and click the
D The [ScanSnap Setup] dialog box appears.
[Next] button.
D
The [ScanSnap License Agreement] dialog
box appears.
If the [ScanSnap Setup] dialog box does
not appear, double-click
"ScanSnap.exe" in the DVD-ROM via
[Explorer] or [My Computer].
8. Read the full text of the "ScanSnap License
Agreement". If you agree to the terms of this
license, select [I accept the terms of the
license agreement] and click the [Next] but-
ton.
3. Click the [Install Products] button.
This operation needs to be performed
several times, according to the number of
software applications to be installed.
D The [Welcome to the InstallShield Wizard for
ScanSnap] dialog box appears.
D
The [Start Copying Files] dialog box appears.
4. Click the [Next] button.
D The [ScanSnap Setup] dialog box appears.
ton.
D The installation is started. When the
installation is complete, the [InstallShield
Wizard Complete] dialog box appears.
5. Check the contents of the message
regarding anti-virus software, and click the
[OK] button.
10. Click the [Finish] button.
D The [ScanSnap Setup] dialog box appears.
11. Remove the Setup DVD-ROM from the
DVD-ROM drive.
D The [Select Features] dialog box appears.
D Software installation is complete. Proceed to "Con-
necting the ScanSnap" (page 5).
Download from Www.Somanuals.com. All Manuals Search And Download.
3
3. Double-click the [ScanSnap] icon.
Mac OS Installation
This explains how to install ScanSnap software on a
Mac OS (Mac OS X v10.5).
■ Software
You can install the following software. For details
about each software, refer to "Installing the Software"
in the Operator’s Guide.
D
A confirmation message window appears.
z ScanSnap Manager (Scanner driver)
4. Click the [Continue] button.
z ABBYY FineReader for ScanSnap (OCR
software)
z Cardiris (Business card text-recognized software)
■ System Requirements
z
z
z
Mac OS X v10.6 (*2)
Mac OS X v10.5
Mac OS X v10.4
®
D The [Welcome to the ScanSnap Installer]
window appears.
Operating
system (*1)
5. Click the [Continue] button.
Intel Core™2 Duo 2.4 GHz or higher
recommended
(Minimum: Intel Core™ Duo 1.83 GHz,
D The [Important Information] window appears.
CPU
®
PowerPC G5 1.6 GHz)
6. Read the "Important Information", then
click the [Continue] button.
Mac OS X v10.6
1 GB or more
D The [Software License Agreement] window
appears.
Mac OS X v10.5
Mac OS X v10.4
Memory
7. Read the "Software License Agreement",
512 MB or more
(1 GB or more recommended)
then click the [Continue] button.
D
A confirmation message window appears.
Display
resolution
1024 × 768 pixels or higher
8. To accept the agreement, click the [Agree]
Hard disk
space
1.32 GB or more of free hard disk space
button.
*1: It is recommended to apply the latest updates to Mac
OS.
*2: Rosetta must be installed to use Cardiris. You can
install Rosetta from the [Optional Installs] package on
the Mac OS X installation disk.
D
The [Standard Install on "(volume_name)"]
window appears.
If the CPU and the memory do not meet the
required specifications, scanning speed will slow
down.
9. Click the [Install] button.
Prepare the Setup DVD-ROM.
1. Turn your computer on and log on as a
user with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-
ROM drive.
D The [ScanSnap] window appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
To install only ScanSnap Manager, click
the [Customize] button to show the
[Custom install on "(volume_ name)"]
window, and clear the [ABBYY
FineReader for ScanSnap] and
[Cardiris] checkboxes.
Connecting the ScanSnap
Connect the ScanSnap after the desired software has
been installed.
Only one ScanSnap can be connected to a
computer at a time.
You cannot install "ABBYY FineReader
for ScanSnap" or "Cardiris" only.
1. Select the power cable type according to
power source for the ScanSnap.
D The installation is started.
D The Cardiris installation window appears.
z To use the ScanSnap at a fixed location
10. Scroll down and read the "License" to the
end. Then, click the [Continue] button.
D A confirmation message window appears.
Use the power cable (*) to connect to an AC out-
let.
For details about the connection, refer to "Using
the Power Cable" (page 6) in Step 3.
*: Combination of the AC adapter and AC cable
11. Click the [Agree] button.
D The [Select Destination] window appears.
D By default, Cardiris is installed in the
Applications Folder.
AC Cable
12. Click the [Continue] button.
AC
Adapter
D The [Installation Type] window appears.
13. Confirm that [Easy Install] is specified in
the [Installation Type] pop-up menu.
z To use the ScanSnap in a remote location with
your laptop computer or a place without AC
outlets available nearby
14. Click the [Install] button.
D The installation is started.
D The [Finish Up] window appears.
Use the USB bus power cable for power supply
For details about the connection, refer to "Using the
USB Bus Power Cable" (page 6) in Step 3.
15. Click the [Quit] button.
appears.
16. Click the [OK] button.
USB Bus
Power Cable
D When the installation is complete, the
[Installation completed successfully] window
appears.
17. Click the [Close] button.
CAUTION
18. Remove the Setup DVD-ROM from the
DVD-ROM drive.
Do not use AC adapters other than the one
supplied with this ScanSnap. Doing so may
cause damage to the ScanSnap.
Manufacturer: LEI
D Software installation is complete. Proceed to "Con-
necting the ScanSnap" (page 5).
Model No.: NU13-1072166-I3
2. Remove the tape seal covering the USB
connector and power connector of the
ScanSnap.
Download from Www.Somanuals.com. All Manuals Search And Download.
5
3. Connect cables to the ScanSnap.
z
Use only the cables supplied with the
ScanSnap.
z
To power on the ScanSnap, the USB
cable and either of the power cables
(power cable or USB bus power cable)
are need to be connected.
z
z
When connecting to a USB hub, be sure
to connect the ScanSnap to the hub
nearest to your computer (first stage). If
the ScanSnap is connected to a USB hub
from the second stage onwards, it may
not operate correctly.
If connecting the ScanSnap with USB 2.0,
make sure that the USB port and the USB
hub are compliant with USB 2.0. The
scanning speed slows down if the
ScanSnap is connected with USB 1.1. If
your computer has the USB 2.0
4. Open the ADF paper chute (cover) of the
ScanSnap.
[Scan] Button
ADF Paper Chute
(Cover)
compatible port, use it.
z Using the Power Cable
1. Connect the power cable
to the power
connector of the ScanSnap and plug in the
AC outlet.
2. Connect the USB cable
to the USB con-
D The [Scan] button lights in blue, indicating
that the ScanSnap is turned on.
D The ScanSnap should be automatically
detected by your computer.
nector on the ScanSnap and the USB port on
your computer.
The bottom part of the ScanSnap may
become hot when the ScanSnap is used
but this does not affect ScanSnap
operation or cause any physical harm.
Be careful not to drop the ScanSnap
when carrying it.
z Using the USB Bus Power Cable
1. Connect the USB bus power cable
to the
power connector on the ScanSnap and the
USB port on your computer.
2. Connect the USB cable
to the USB con-
nector on the ScanSnap and the USB port on
your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
6
5. Check the ScanSnap Manager icon.
Scan Test
After installing the software and connecting the
ScanSnap and computer, use ScanSnap Manager
and check that documents can be scanned.
The following procedure is described with the Quick
Menu scanning method. For other scanning methods,
refer to the Operator’s Guide.
D The ScanSnap Manager icon appears on the
taskbar.
z
z
The icon varies depending on the power
source to be used.
For power cable connection:
For USB bus power cable connection:
It may take a few moments until the
ScanSnap is ready to be used, and the
ScanSnap Manager icon changes to
1. Load a document in the ScanSnap.
1. Pull up the extension.
Extension
or to
in the taskbar.
®
®
In Microsoft Windows 7, the ScanSnap
Manager icon is displayed in the menu
which appears when you click
taskbar.
in the
Drag and drop the ScanSnap Manager icon
onto the taskbar to have the icon always
displayed in the taskbar.
2. Slide open the side guides of the right and
left.
Side Guides
D The ScanSnap Manager icon appears in the
Dock.
z
z
The icon varies depending on the power
source to use.
For power cable connection:
For USB bus power cable connection:
It may take a few moments until the
ScanSnap is ready to be used, and the
ScanSnap Manager icon changes to
3. Load the document on the ADF paper chute
(cover), and adjust the side guides to the size
of the document.
Set the document
face-down and top-first
or to
in the Dock.
D Connecting the ScanSnap to your computer is
complete. Proceed to "Scan Test" (page 7).
Download from Www.Somanuals.com. All Manuals Search And Download.
7
2. Press the [Scan] button on the ScanSnap.
Contact for Inquiries
Refer to the contact list on the last page of the "Safety
Precautions" document.
D Scanning starts.
D The Quick Menu appears when scanning is
completed.
If scanning does not start, refer to
"Troubleshooting" in the Operator’s
Guide.
3. From the Quick Menu, click an icon for the
item to be performed.
D The selected item is performed. When the
ScanSnap is interacting with an application,
the application window appears.
D Confirm that the function selected from the Quick
Menu is performed. If so, the scan test is com-
pleted successfully.
ScanSnap preparations are complete.
For details on how to operate or use the ScanSnap,
refer to the Operator’s Guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
8
|