Fujitsu Microelectronics Europe
FMEMCU-UG-960011-11
User Guide
F²MC-16FX FAMILY
ADAPTER BOARD
ADA-16FX-ETHERNET
USER GUIDE
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Warranty and Disclaimer
Warranty and Disclaimer
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts
its warranties and its liability for the ADA-16FX-ETHERNET Board and all its deliverables (eg.
software include or header files, application examples, target boards, evaluation boards, engineering
samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in
accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under
which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all
accompanying written materials. In addition, to the maximum extent permitted by applicable law,
Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of
the Product and any consequential damages in cases of unauthorised decompiling and/or reverse
engineering and/or disassembling. Note, the ADA-16FX-ETHERNET Board and all its deliverables
are intended and must only be used in an evaluation laboratory environment.
1.
Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in
accordance with the accompanying written materials for a period of 90 days form the date of
receipt by the customer. Concerning the hardware components of the Product, Fujitsu
Microelectronics Europe GmbH warrants that the Product will be free from defects in material
and workmanship under use and service as specified in the accompanying written materials
for a duration of 1 year from the date of receipt by the customer.
2.
Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability
and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s
sole discretion, either return of the purchase price and the license fee, or replacement of the
Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in
original packing and without further defects resulting from the customer’s use or the transport.
However, this warranty is excluded if the defect has resulted from an accident not attributable
to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the
customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH.
3.
4.
To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH
disclaims all other warranties, whether expressed or implied, in particular, but not limited to,
warranties of merchantability and fitness for a particular purpose for which the Product is not
designated.
To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s
and its supplier’s liability are restricted to intention and gross negligence.
NO LIABILITY FOR CONSEQUENTIAL DAMAGES
To the maximum extent permitted by applicable law, in no event shall Fujitsu
Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever
(including but without limitation, consequential and/or indirect damages for personal
injury, assets of substantial value, loss of profits, interruption of business operation,
loss of information, or any other monetary or pecuniary loss) arising from the use of
the Product.
Should one of the above stipulations be or become invalid and/or unenforceable, the remaining
stipulations shall stay in full effect
© Fujitsu Microelectronics Europe GmbH
- 3 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 1 Contents
1 Contents
REVISION HISTORY............................................................................................................ 2
WARRANTY AND DISCLAIMER ......................................................................................... 3
1 CONTENTS...................................................................................................................... 4
2 OVERVIEW...................................................................................................................... 5
2.1 Abstract................................................................................................................... 5
2.2 Features of adapter board ADA-16FX-ETHERNET................................................. 5
2.3 Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC).................... 5
3 INSTALLATION............................................................................................................... 6
3.1 Jumper settings of ADA-16FX-ETHERNET............................................................. 7
4 JUMPERS AND LED’S.................................................................................................... 8
4.1 Chip select (JP: 1, 2, 3) ........................................................................................... 8
4.2 Ethernet jack select (JP: 4, 5).................................................................................. 8
4.3 Link LED, Activity LED (LINK, ACT) ........................................................................ 9
5 CONNECTORS.............................................................................................................. 10
5.1 Ethernet connector (X1) ........................................................................................ 10
5.2 Edge Connectors (X2, X3, X11) ............................................................................ 10
6 SILK-PLOT OF THE BOARD ........................................................................................ 11
7 RELATED PRODUCTS ................................................................................................. 12
8 INFORMATION IN THE WWW....................................................................................... 13
9 CHINA-ROHS REGULATION ........................................................................................ 15
10 RECYCLING .................................................................................................................. 17
UG-960011-11
- 4 -
© Fujitsu Microelectronics Europe GmbH
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 2 Overview
2 Overview
2.1 Abstract
The ADA-16FX-ETHERNET is an adapter board that can be used together with the
evaluation board SK-16FX-EUROSCOPE (SK-16FX-100PMC). The ADA-16FX-ETHERNET
extends the evaluation board with Ethernet connectivity. It can be used for software
development and testing.
The board allows the designer immediately to start with the software development before a
final target system is available.
2.2 Features of adapter board ADA-16FX-ETHERNET
<
10BaseT Ethernet connectivity
Software example including openTCP stack is available
-
<
<
<
Multiplexed bus interface
Selectable chip select via Jumper
Pin header for SK-16FX-EUROSCOPE (SK-16FX-100PMC) base board
(Note: SK-16FX-EUROSCOPE has to be ordered separately)
2.3 Features of base board SK-16FX-EUROSCOPE (SK-16FX-100PMC)
<
<
<
<
<
<
<
<
<
1x UART-Transceiver (SUB-D9 connector)
1x USB to serial converter (Type-B connector)
1x High-speed CAN-Transceiver (SUB-D9 connector)
2x LED-Display (7-Segment)
2x User-button
1x Reset-button, Reset-LED
All 100 pins routed to pin-header
On-board 5V and 3V voltage regulators, Power-LED
USB power-supply (external power supply possible)
This board must only be used for test applications
in an evaluation laboratory environment.
© Fujitsu Microelectronics Europe GmbH
- 5 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 3 Installation
3 Installation
Remove carefully the board from the shipping box and check for any damages.
Disconnect your SK-16FX-EUROSCOPE (SK-16FX-100PMC) evaluation board from USB
and external power supply. Select the correct Voltage supply:
ADA-16FX-ETHERNET is designed for 5V power supply.
Jumper
Setting
1-2
Description
VCC is set to 5V (ADA-16FX-ETHERNET)
VCC is set to 3.3V
JP10 (5V/3V3)
2-3
Attach the adapter board to the evaluation board as shown below. The Ethernet jack has to
face to the outer edge.
Ethernet jack
Note:
Make sure to jumper the board to 5V before connecting the ADA-16FX-ETHERNET.
UG-960011-11
- 6 -
© Fujitsu Microelectronics Europe GmbH
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 3 Installation
3.1 Jumper settings of ADA-16FX-ETHERNET
The following jumper settings are set by default:
Jumper
Description / Function
Type
Default
JP1
JP2
JP3
JP4
JP5
Use chip select line 2
Use chip select line 3
solder JP 2pol. Closed
solder JP 2pol.
solder JP 2pol.
solder JP 3pol.
solder JP 3pol.
Open
Open
1-2
Use chip select line 4
Select center tap A of Ethernet jack
Select center tap B of Ethernet jack
1-2
Please refer to the documentation of the evaluation board for detailed information about the
jumper settings for the SK-16FX-EUROSCOPE (SK-16FX-100PMC).
© Fujitsu Microelectronics Europe GmbH
- 7 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 4 Jumpers and LED’s
4 Jumpers and LED’s
This chapter describes all jumpers that can be modified and all LED’s on the adapter board.
The default setting is shown with a grey shaded area.
4.1 Chip select (JP: 1, 2, 3)
One out of the three chip select signals CS2, CS3 or CS4 can be selected:
JP1, JP2, JP3 connect chip select signal of MCU to chip select signal of Ethernet chip
Jumper
Setting
Description
ON (closed)
OFF (open)
ON (closed)
OFF (open)
ON (closed)
OFF (open)
CS2 is connected to CHIPSEL of CS8900A
CS2 is not connected
JP1 (CS2)
CS3 is connected to CHIPSEL of CS8900A
CS3 is not connected
JP2 (CS3)
JP3 (CS4)
CS4 is connected to CHIPSEL of CS8900A
CS4 is not connected
Default: JP1 is closed
By default, the chip select signal CS2 of the MB96F348HS is connected to the Ethernet chip.
4.2 Ethernet jack select (JP: 4, 5)
The board layout is designed to be used with different Ethernet jacks.
JP4, JP5
Select center tap pin of Ethernet jack
Jumper
Setting
Description
1-2
Capacitor 9 is connected to pin 4 of the
Ethernet jack
JP4 (AVss)
2-3
1-2
2-3
Capacitor 9 is connected to pin 7 of the
Ethernet jack
Capacitor 10 is connected to pin 5 of the
Ethernet jack
JP5 (AVcc)
Capacitor 10 is connected to pin 8 of the
Ethernet jack
Default: JP4 and JP5 are set to 1-2
By default the pins 4 and 5 of the assembled Ethernet jack are used as center tap pin. This
setting depends on the type and manufacturer of the used Ethernet jack (see chapter 5.1).
UG-960011-11
- 8 -
© Fujitsu Microelectronics Europe GmbH
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 4 Jumpers and LED’s
4.3 Link LED, Activity LED (LINK, ACT)
These LEDs display the status of the Ethernet interface.
LED
LINK
ACT
Colour
Green
Yellow
Description
Indicates that a link is established
Indicates activity on the Ethernet
By default the LINK LED should light directly after connected to a network.
© Fujitsu Microelectronics Europe GmbH
- 9 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 5 Connectors
5 Connectors
5.1 Ethernet connector (X1)
This is the Ethernet jack for connecting the ADA-16FX-ETHERNET to the Ethernet. The
connector complies with the 10BaseT standard. The used connector has integrated
transformers for transmit and receive lines.
The Ethernet jack and the Ethernet controller depends on the power supply voltage:
Rx
Tx
Supply Voltage
Used jack
Ethernet Chip Adapter Board
Transitions Transitions
Halo HFJ11-
1043E
ADA-16FX-
CS8900CQZ
5V
1:1
1:1
1:1.41
1:2.5
ETHERNET
Halo HFJ11-
1041E
3V3
CS8900CQ3Z
-
5.2 Edge Connectors (X2, X3, X11)
The edge connectors are assembled on the bottom side of the adapter board. They are used
to attach the ADA-16FX-ETHERNET adapter board to the SK-16FX-EUROSCOPE (SK-
16FX-100PMC) evaluation board. All used signals are provided by the edge connectors.
Connector
X2 (1 – 20)
MCU Pins
1 – 20
X3 (71 – 100)
X11 (51 – 70)
71 – 100
51 – 70
The adapter board is powered via the edge connectors.
UG-960011-11
- 10 -
© Fujitsu Microelectronics Europe GmbH
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 6 Silk-Plot of the Board
6 Silk-Plot of the Board
X2
Ethernet
connector
X1
X3
Latch
Latch
Cirrus
CS8900A
X11
© Fujitsu Microelectronics Europe GmbH
- 11 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 7 Related Products
7 Related Products
<
<
<
SK-16FX-EUROSCOPE
ADA-16FX-ETHERNET
MB96F348HS
Evaluation board with MB96F348HS
FPT-100P-M20 package
Adapterboard for SK-16FX-EUROSCOPE
(SK-16FX-100PMC)
MB96340 Series Flash MCU
UG-960011-11
- 12 -
© Fujitsu Microelectronics Europe GmbH
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 8 Information in the WWW
8 Information in the WWW
Information about FUJITSU MICROELECTRONICS Products
can be found on the following Internet pages:
Microcontrollers (8-, 16-, and 32bit), Graphics Controllers
Datasheets and Hardware Manuals, Support Tools (Hard- and Software)
Linear Products: Power Management, A/D and D/A Converters
Media Products: SAW filters, acoustic resonators and VCOs
For more information about FUJITSU MICROELECTRONICS
© Fujitsu Microelectronics Europe GmbH
- 13 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 8 Information in the WWW
UG-960011-11
- 14 -
© Fujitsu Microelectronics Europe GmbH
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 9 China-RoHS regulation
9 China-RoHS regulation
Evaluation Board评估板
Emulation Board 仿真板
根据SJ/T11364-2006
《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。
The following product pollution control information is provided according to SJ/T11364-2006
Marking for Control of Pollution caused by Electronic Information Products.
1．电子信息产品污染控制标志说明 Explanation of Pollution Control Label
该标志表明本产品含有超过中国标准SJ/T11363-2006
《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为本产品
的环保使用期，表明本产品在正常使用的条件下，有毒有害物质不会发生外泄或突变，用户使
用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限，单位为年。
为保证所申明的环保使用期限，应按产品手册中所规定的环境条件和方法进行正常使用，并严
格遵守产品维修手册中规定的定期维修和保养要求。
产品中的消耗件和某些零部件可能有其单独的环保使用期限标志，并且其环保使用期限有可能
比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件，以保证
所申明的整个产品的环保使用期限。
本产品在使用寿命结束时不可作为普通生活垃圾处理，应被单独收集妥善处理。
请注意：环保使用期限50年的指定不是与产品的耐久力，使用期限或任何担保要求等同的。
This symbol to be added to all EIO sold to China, indicates the product contains hazardous
materials in excess of the limits established by the Chinese standard SJ/T11363-2006
Requirements for Concentration Limits for Certain Hazardous Substances in Electronic
Information Products. The number in the symbol is the Environment-friendly Use Period
(EFUP), which indicates the period, starting from the manufacturing date, during which the
toxic or hazardous substances or elements contained in electronic information products will
not leak or mutate under normal operating conditions so that the use of such electronic
information products will not result in any severe environmental pollution, any bodily injury or
damage to any assets, the unit of the period is “Year”.
© Fujitsu Microelectronics Europe GmbH
- 15 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 9 China-RoHS regulation
In order to maintain the declared EFUP, the product shall be operated normally according to
the instructions and environmental conditions as defined in the product manual, and periodic
maintenance schedules specified in Product Maintenance Procedures shall be followed
strictly.
Consumables or certain parts may have their own label with an EFUP value less than the
product. Periodic replacement of those consumables or parts to maintain the declared EFUP
shall be done in accordance with the Product Maintenance Procedures.
This product must not be disposed of as unsorted municipal waste, and must be collected
separately and handled properly after decommissioning.
Please note: The designation of 10 years EFUP is not to be equated with the durability, use-
duration or any warranty-claims of the product.
产品中有毒有害物质或元素的名称及含量
Table of hazardous substances name and concentration
有毒有害物质或元素
部件名称
Hazardous substances name
Component Name
铅
汞
镉
六价铬
多溴联苯
多溴二苯醚
(Pb)
(Hg)
(Cd)
(Cr(VI))
(PBB)
(PBDE)
ADA-16FX-ETHERNET
x
o
o
o
o
o
O: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下
X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求
•
•
此表所列数据为发布时所能获得的最佳信息
由于缺少经济上或技术上合理可行的替代物质或方案，此医疗设备运用以上一些有毒有害物质来实现设备的预期
临床功能，或给人员或环境提供更好的保护效果。
O: Indicates that this toxic or hazardous substance contained in all of the homogeneous
materials for this part is below the limit requirement in SJ/T11363-2006.
X: Indicates that this toxic or hazardous substance contained in at least one of the
homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006.
•
Data listed in the table represents best information available at the time of publication
UG-960011-11
- 16 -
© Fujitsu Microelectronics Europe GmbH
Download from Www.Somanuals.com. All Manuals Search And Download.
ADA-16FX-ETHERNET
Chapter 10 Recycling
10 Recycling
Gültig für EU-Länder:
Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische
Gesetze nehmen wir dieses Gerät wieder zurück.
Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
63225 Langen
Valid for European Union Countries:
According to the European WEEE-Directive and its implementation into national laws we
take this device back.
For disposal please send the device to the following address:
Fujitsu Microelectronics Europe GmbH
Warehouse/Disposal
Monzastraße 4a
D-63225 Langen
Germany
© Fujitsu Microelectronics Europe GmbH
- 17 -
UG-960011-11
Download from Www.Somanuals.com. All Manuals Search And Download.
|