Fujitsu Laptop T4310 User Manual

Innovative technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Further information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Notational conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Ports and controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Important notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Safety notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Energy saving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Energy saving under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Travelling with your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Before you travel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Notebook: transporting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Cleaning the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

First-time setup of your device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Unpacking and checking the device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Selecting a location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Mains adapter connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

Switching on the device for the ﬁrst time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Working with the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Opening the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Switching on the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Programming the ON/OFF switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Different ways to use your notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

From notebook to Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Select display orientation (portrait or landscape orientation) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

From Tablet PC to notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Switching off the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

Closing the notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Language selection (Windows XP only) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Selecting the language for menu texts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Selecting the language for handwriting recognition and keyboard . . . . . . . . . . . . . . . . . . . . . . . . 33

Handwriting recognition under Windows Vista . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

Handwriting recognition under Windows 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33

LCD screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Ambient light sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Using the device as a Tablet PC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Using ﬁngers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Using the stylus pen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Using the device as a notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Touchpad and touchpad buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41

Keyboard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42

Virtual numeric keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44

Country and keyboard settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45

Tablet buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47

Key combinations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

Programming the tablet buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Webcam . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

Charging, caring for and maintaining the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53

Removing and installing the battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54

Batteries with a capacity of 5800 mAh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Removing a module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Installing a module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Optical drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

Handling data carriers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

CD/DVD indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

Inserting or removing a data carrier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Manual removal (emergency removal) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61

Removing and ﬁtting the dust removal cover (ventilation slot cover) . . . . . . . . . . . . . . . . . . . . . . . . . 62

Using the power-management features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Memory cards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Supported formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Inserting the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

Removing the memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

ExpressCards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

Inserting the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Removing the card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

Loudspeakers and microphones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Inserting the SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Removing a SIM card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Wireless LAN / Bluetooth / UMTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Switching the wireless components on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Setting up WLAN access . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Access via UMTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Ethernet and LAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Your Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Ports on the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Connecting the notebook to the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Connecting the mains adapter to the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Switching on the notebook via the port replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Switching off notebook via Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

Disconnecting the notebook from the Port Replicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

Security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Brief overview of security functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76

Conﬁguring the ﬁngerprint sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Use Kensington Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

Conﬁguring password protection in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Protecting BIOS Setup Utility (supervisor and user password) . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

Password protection for booting of the operating system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79

Using the security function of the tablet keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Setting the Supervisor password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Setting the User password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Entering passwords using the tablet buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Trusted Platform Module (TPM) (device-dependent) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81

Enabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Disabling TPM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82

Connecting external devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Connecting an external monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

HDMI port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Connecting USB devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

How to remove USB devices correctly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86

Connecting FireWire devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Connecting external audio devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Microphone port / Line In . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87

Headphone port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

Removing and installing components during servicing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Notes on installing and removing boards and components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89

Preparing to remove components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Installing and removing memory expansion . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Removing memory modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91

Installing a memory module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92

Removing and installing the hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Removing a cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Removing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

Installing a hard disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

Attaching the cover . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Finishing component removal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Settings in BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Starting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Operating BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97

Exiting BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Exit Saving Changes - save changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . . . . 98

Exit Discarding Changes – Discard changes and exit BIOS Setup Utility . . . . . . . . . . . . . . . . . 98

Load Setup Defaults – Copy Standard Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Discard Changes – Discard changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . 98

Save Changes - save changes without exiting the BIOS Setup Utility . . . . . . . . . . . . . . . . . . . . 98

Save Changes and Power Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

Troubleshooting and tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99

Help if problems occur . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

Restoring the hard disk contents under Windows . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100

The notebook’s date or time is incorrect . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

Battery indicator does not illuminate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

When certain characters are entered on the keyboard, only numerals are written . . . . . . . . . . . . . 101

The notebook’s LCD screen remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

The LCD screen is difﬁcult to read . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

The external monitor remains blank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

The external monitor is blank or the image is unstable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102

The cursor does not correctly follow the pen movements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

The notebook cannot be started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103

The notebook stops working . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

The printer does not print . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

The radio connection to a network does not work . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104

The battery discharges too quickly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Acoustic warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Error messages on the screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

Technical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Notebook . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107

Port Replicator (optional) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108

Rechargeable battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Mains adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

Manufacturer’s notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Energy Star . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Disposal and recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Declarations of Conformity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

Tested safety (GS, valid only for LIFEBOOK T4410) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110

CE marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Regulatory notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

Regulatory information for notebooks without radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111

DOC (Industry CANADA) notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

FCC Regulatory information for notebooks with radio device . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Innovative technology

... and ergonomic design make your device a reliable and convenient companion.

The device boots very quickly, is ready for immediate use and offers a particularly

long operating time because of its high capacity battery.

With the user-friendly "BIOS Setup Utility" you can control your notebook’s hardware and better

protect your system against unauthorised access by using the powerful password properties.

Information on the connections and user components of your notebook

can be found in "Ports and controls", Page 9.

Further information

The Windows drivers for your device can be found on our Internet site.

The factory installation of your device does not support any other operating

system. Fujitsu Technology Solutions accepts no liability whatsoever

if any other operating system is used.

Software oriented components of these instructions refer to Microsoft products,

if they come within the scope of the delivery.

If you install other software products, pay attention to the operating

instructions of the manufacturer.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Innovative technology

Notational conventions

Pay particular attention to text marked with this symbol. Failure to observe

these warnings could pose a risk to health, damage the device or lead

to loss of data. The warranty will be invalidated if the device becomes

defective through failure to observe these warnings.

Indicates important information for the proper use of the device.

►

Indicates an activity that must be performed

Indicates a result

ꢀ

This font

indicates data entered using the keyboard in a program dialogue or at

the command line, e.g. your password (Name123) or a command used to

start a program (start.exe)

This font

indicates information that is displayed on the screen by a program, e.g.:

Installation is complete.

This font

indicates

•

terms and texts used in a software interface, e.g.: Click on Save

names of programs or ﬁles, e.g. Windows or setup.exe.

"This font"

indicates

•

cross-references to another section, e.g. "Safety information"

cross-references to an external source, e.g. a web address: For more

information, go to "http://ts.fujitsu.com"

•

Names of CDs, DVDs and titles or designations of other materials, e.g.:

"CD/DVD Drivers & Utilities" or "Safety" Manual

Key

F10

indicates a key on the keyboard, e.g:

This font

indicates terms and texts that are emphasised or highlighted, e.g.: Do

not switch off the device

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

This chapter presents the individual hardware components of your device. It gives an

overview of the displays and connections of the device. Please familiarise yourself with

these components before you start to work with the device.

= Webcam

= Tablet buttons

10 = FireWire port

11 = Earphone and loudspeaker port

12 = Status indicators

13 = Touchpad

= ON/OFF switch

= Ambient light sensor

= Status indicators

14 = Loudspeakers

= Keyboard

15 = Fingerprint sensor

= Touchpad buttons

= Memory card slot

= ON/OFF switch for wireless components

16 = LCD screen for use with the pen and

with TouchScreen functionality

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

= DC input connector (DC IN)

= USB port

= ExpressCard slot

= Eject button for ExpressCard

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

= Kensington Lock

= USB ports

= VGA monitor port

= LAN port

= HDMI port

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

= Pen slot

= Module bay with optical drive

= Unlocking lever for module bay

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Ports and controls

= Hard disk service compartment

= Dust chamber cover

= Memory service compartment

= Rechargeable battery

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

INoteosrtantnotes

This chapter contains essential safety information which must be followed

when working with your notebook. Other notes also provide useful information

which will help you with your notebook.

Safety notes

SNaoftetsynotes

Please note the information provided in the "Safety" manual and

in the following safety notes.

Please pay special attention to the sections in the manual marked

with the symbol on the left.

When connecting and disconnecting cables, observe the relevant

notes in this operating manual.

Read the information on the ambient conditions in the "T e chnical data",

Page 107 and "First-time setup of your device", Page 17 before preparing your

notebook for use and switching it on for the ﬁrst time.

When cleaning the device, please observe the relevant notes in the

section "Cleaning the notebook", Page 16.

Pay attention to the additional safety notes for devices with wireless

components provided in the "Safety" manual.

Please refer to the notes in the chapter "Removing and installing

components during servicing", Page 89.

This notebook complies with the relevant safety regulations for data processing

equipment. If you have questions about using your notebook in a particular area,

please contact your sales outlet or our Hotline/Service Desk.

Energy saving

NEnoetersgysaving

Switch the notebook off when it is not in use. Switch off external, connected devices if you

are not using them. If you use the energy saving functions, the notebook uses less energy.

You will then be able to work for longer before having to recharge the battery.

Energy efﬁciency is increased and the environmental impact is reduced.

You save money while protecting the environment.

Energy saving under Windows

►

Make use of the power management features (see ""Using the power-management features",

Page 63").

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

Travelling with your notebook

MTN

bneissble

prktartaiotnion

Please observe the points listed below when travelling with your notebook.

Before you travel

►

Back up important data stored on your hard disk.

NTr

,noktebook

Switch off the radio component for data security reasons. With data trafﬁc via a wireless

connection, it is also possible for unauthorised third parties to receive data.

Information on activating data encryption is provided in the documentation

for your radio component.

►

If you wish to use your notebook during a ﬂight, ﬁrst check with the ﬂight

attendants if it is OK to do so.

When travelling in other countries

►

If you are travelling abroad, check that the mains adapter can be operated with the

local mains voltage. If this is not the case, obtain the appropriate mains adapter for

your notebook. Do not use any other voltage converter!

►

Check whether the local mains voltage and the power cable are compatible. If this is

not the case, buy a power cable that matches the local conditions.

Enquire with the corresponding government ofﬁce of the country you will be

travelling in as to whether you may operate the radio component integrated in

your notebook there (see also "CE marking", Page 111).

Notebook: transporting

Protect the notebook from severe shocks and extreme temperatures

(e.g. direct sunlight in a car).

►

If your device has an optical drive, remove all data media (e.g. CD, DVD) from the drives.

esb

oktation

Switch the notebook off.

Unplug the mains adapter and all external devices from the power socket.

Disconnect the mains adapter cable and the data cables for all external devices.

Close the LCD screen.

To protect against damaging jolts and bumps, use a notebook carrying

case to transport your notebook.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Important notes

Cleaning the notebook

Do not clean any interior parts yourself; leave this job to a service technician.

Only use cleaning products designed for computers. Normal household

cleaners and polishes can damage the markings on the keyboard and the

device, the paintwork or the notebook itself.

Ensure that no liquid enters the notebook.

The LCD screen very sensitive to scratches. Only clean the display

surface with a very soft, slightly damp cloth.

►

Switch the notebook off.

NKTLCoCeroleyuyDtasecbtsnbhoacoipanlrVoagerkdienwdisplay

In order to prevent accidentially switching the device on, remove the power cable from the mains

adaptor and remove the battery (see "Removing and installing the battery", Page 54).

The surface can be cleaned with a dry cloth. If particularly dirty, use a cloth which has

been moistened in mild domestic detergent and then carefully wrung out.

ꢀ

To clean the keyboard and the touchpad, if available, you can use disinfectant wipes.

Ensure that no liquid enters the device.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your device

FGierstti-

tasretetup

Please read the chapter "Important notes", Page 14.

If your device is equipped with a Windows operating system, the necessary

hardware drivers and supplied software are already pre-installed.

Before you switch on the device for the ﬁrst time, connect it to the mains voltage

using the mains adapter, see "Mains adapter connecting", Page 18. The mains

adapter must be connected during the entire installation process.

A system test is performed when your device is ﬁrst switched on. Various messages

can appear. The display may remain dark for a short time or may ﬂicker.

Please follow the instructions on the screen.

NEVER switch off your device during the ﬁrst-time setup process.

On delivery, the battery can be found in the battery compartment or in the accessories kit.

The battery must be charged if you want to operate your device using the battery.

When used on the move, the built-in battery provides the device with the necessary power. You

can increase the operating time by using the available energy-saving functions.

For instructions on how to connect external devices (e.g. mouse, printer) to your

device, please refer to the operating manual for your device.

Unpacking and checking the device

Should you discover any damage that occurred during transportation,

notify your local sales outlet immediately!

►

Unpack all the individual parts.

PTra

oinrt

Check your device for any visible damage which may have occurred during transportation.

You may need the packaging in the future, if you need to transport your device.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your device

Selecting a location

SDM

alvie

etain

tocration

Select a suitable location for the device before setting it up. Follow

the instructions below when doing so:

•

Never place the device or the mains adapter on a heat-sensitive surface.

The surface could be damaged as a result.

Never place the device on a soft surface (e.g. carpeting, upholstered furniture,

bed). This can block the air vents and cause overheating and damage.

The underside of the device heats up during normal operation. Prolonged contact

with the skin may become unpleasant or even result in burns.

Place the device on a stable, ﬂat, non-slippery surface. Please note that the

rubber feet of the device may mark certain types of delicate surfaces.

Keep other objects at least 100 mm away from the device and its

mains adapter to ensure adequate ventilation.

•

Never cover the ventilation slots of the device.

Do not expose the device to extreme environmental conditions. Protect

the device from dust, humidity, and heat.

Mains adapter connecting

PMaipnasraindgapfoterorperation

Observe the safety precautions in the enclosed "Safety" manual.

The supplied power cable conforms to the requirements of the country in

which you purchased your device. Make sure that the power cable is approved

for use in the country in which you intend to use it.

►

Connect the power cable (1) to the

mains adapter.

►

Plug the mains cable (2) into a mains outlet.

Connect the mains adapter cable (3) to

the DC jack (DC IN) of the device.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

First-time setup of your device

Switching on the device for the ﬁrst time

Switchingonfortheﬁrsttime

On devices with ON/OFF switch for wireless components: Slide the ON/OFF switch

for wireless components to the ON position before switching on the device.

When you switch on the device for the ﬁrst time, the supplied software is

installed and conﬁgured. Because this procedure must not be interrupted,

you should set aside enough time for it to be fully completed and connect

the device to the mains using the mains adapter.

During the installation process, DO NOT restart the device unless

you are requested to do so!

To make it easier to use your device for the ﬁrst time, the operating system

is pre-installed on the hard disk.

►

Slide the ON/OFF switch (1) to the right to switch on the notebook.

The ON/OFF switch returns automatically to its original position.

During installation, follow the instructions on screen.

ꢀ

►

If a Windows operating system is installed on your device, you will ﬁnd more

information on the system and drivers, help programmes, updates, manuals etc.

on the device or on the Internet at "http://ts.fujitsu.com/support".

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Notebook,operation

This chapter describes the basics for operating your notebook. Please read the chapter

entitled "Connecting external devices", Page 83 for instructions on how to connect

devices such as a mouse and a printer to the notebook.

Please refer to the notes in "Important notes", Page 14.

Status indicators

Syta

oilndicators

The status indicators provide information about the status of the power supply,

the drives and the keyboard functions etc.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Status displays Description

Power-on indicator

•

Indicator is illuminated: The notebook is switched on.

Indicator ﬂashes: The notebook is in sleep mode (Save-to-RAM).

The indicator is not illuminated: The notebook is switched off or in

Save-to-Disk mode.

Power supply indicator

Indicator is illuminated: The mains adapter is supplying power to the

notebook.

Drive indicator

Indicator is illuminated: The hard disk drive or the CD/DVD in the optical drive

of the notebook is being accessed.

Battery charging indicator

This description applies to both batteries.

The battery charging indicator shows whether a battery is installed and being

charged.

Battery indicator

This description applies to both batteries.

The battery indicator shows the state of charge of the installed battery.

•

Indicator is lit blue: The battery is between 50 % and 100 % charged.

The indicator is lit orange: The battery is between 13 % and 49 %

charged.

•

The indicator is lit red: The battery is between 0 % and 12 % charged.

The indicator ﬂashes orange: The battery state of charge is being

checked (for four seconds after battery installation).

•

The indicator ﬂashes red: The battery is faulty.

The indicator is not lit: There is no battery installed.

Note: If you use batteries with a capacity of 5800 mAh, you can also check

the charge condition on the battery itself.

Num Lock indicator

Num

Indicator is lit: The

key has been pressed. The virtual numerical

keypad is activated. You can output the characters indicated on the upper

right of the keys.

Caps Lock indicator

Indicator is lit: The Caps Lock key has been pressed. All letters will be output

as uppercase letters. In the case of keys labelled several times, the character

printed on the upper left of the key will appear when that key is pressed.

Scroll Lock indicator

Indicator is lit: The key combination

Scr

has been pressed. The effect

that this key has varies between applications.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Opening the notebook

►

Press the release button (1), and unfold the LCD screen upwards (2).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Switching on the notebook

NPSuoswte

n-o

nk/R:ins

iicutcamhtoie otnton

►

Slide the ON/OFF switch (1) to the right to switch on the notebook.

The ON/OFF switch returns automatically to its original position.

The power-on indicator (2) lights.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Programming the ON/OFF switch

You can program the ON/OFF switch:

Operating system

Start - (Settings) - Control panel - Performance and

Maintenance - Power options - Advanced

Windows XP

Start - (Settings) - Control panel - Mobile PC -

Power options

Windows Vista

Windows 7

Start - (Settings) - Control panel - System and

Security - Power options

If you have assigned a password, you must enter this when requested to

do so, in order to start the operating system. Detailed information can be

found in the chapter "Security functions", Page 76.

Different ways to use your notebook

During your daily work, you can use your notebook as a tablet PC or as a notebook,

just as you wish. The "conversion" is lightning fast and effortless.

Note the direction of rotation in the following description! No guarantee claims

can be met for damage caused by turning in the wrong direction.

You must note that the display cannot be turned completely on its own axis!

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

From notebook to Tablet PC

►

Press the release button, and unfold the LCD screen upwards slightly.

Rotate the hook from position 1 to position 2.

►

Raise the screen into a vertical position.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

►

Hold the screen as low as possible on both sides. Turn the screen to the left or right in the direction

of the arrow. At ﬁrst you will feel some slight resistance, then it will turn easily and without friction.

Rotate the display further until it has turned 180° and the hinge latches in.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

►

Now fold the screen down until the back of the screen is ﬂat on top of

the keyboard and the hook latches in.

The screen is now secured in the tablet position.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Select display orientation (portrait or landscape orientation)

LPDaoisnrptdrlsaciytaoprieonrtiaetniotantion

Sie haben die Wahl, ob Sie den Bildschirm im Hochformat oder Querformat verwenden möchten.

Zum Umschalten von der einen zur anderen Bildschirmausrichtung drücken Sie die Tablet-Taste

The display switches automatically to portrait layout when the device is used as a Tablet

PC and to landscape layout when it is used as a notebook.

Windows XP

You can change these settings in the Fujitsu menu or under Start -

(Settings -) Control Panel - Tablet and Pen Settings.

Windows Vista

You can change these settings in the Fujitsu menu or under Start - (Settings -)

Control Panel - Mobile PC - Tablet PC - Settings.

Windows 7

You can change these settings in the Fujitsu menu or under Start - (Settings -)

Control Panel - Hardware and Sound - Display - Settings.

Proﬁles for operating in different screen orientations are found under Fujitsu

Tablet Control in the Fujitsu menu. These proﬁles have preset standard

conﬁgurations that can be modiﬁed as desired.

These settings not only affect the monitor settings on the Tablet PC, but

also any external monitors that may be connected.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

From Tablet PC to notebook

►

Press the release button (1), and unfold the LCD screen upwards (2).

Open the display until it is in the vertical position.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Note the direction of rotation in the following description! No guarantee claims

can be met for damage caused by turning in the wrong direction.

►

Hold the display on both sides as far down as possible and then turn the

display. It turns easily and without resistance.

Turn or move the display further until it has turned 180° and the hinge latches in.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

►

To be able to shut the notebook again, rotate the hook from position (1) to position (2).

Switching off the notebook

Notebook

►

Close all applications and then shut down the operating system (please

see the "Operating System Manual").

►

Slide the ON/OFF switch towards the right.

The ON/OFF switch returns automatically to its original position.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Closing the notebook

►

Fold the LCD screen down onto the lower part of the notebook until you feel it lock into place.

Language selection (Windows XP only)

OLangruaatinggesyesletecmtiolnanguage

Your notebook is supplied with the Windows XP Tablet PC 2005 Edition operating system

as a single or multi-language version (according to your preference).

In the single language version, you are presented with two handwriting recognition input

areas, one for the operating system language and one for English.

In the multi-language version, you have the option of setting the language of the menu

texts and the keyboard as well as that of the handwriting recognition.

With the multi-language models, the default language set for the menu texts,

keyboard and handwriting recognition is English.

Selecting the language for menu texts

Selectthelanguage:formenutexts

►

Click on Control Panel – Date, Time, Language and Regional Options – Language and Regional options.

Select the desired language on the Regional Options tab.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Selecting the language for handwriting recognition

and keyboard

Selectthelanguage:forhandwritingrecognitionandkeyboard

►

Click on Control Panel – Date, Time, Language and Regional Options – Language and Regional options.

Select the Languages tab.

In the Text services and input languages ﬁeld, click on the Details button.

In the next dialog window, select the Settings register card and click the

Add button in the Installed Services ﬁeld.

►

In the next dialog window, select the desired Input area schema.

You can now decide which functions (keyboard layout, handwriting recognition, etc.)

the selected input area schema is to be activated for.

ꢀ

►

Mark the desired functions and then conﬁrm your entries by clicking the OK button.

You will ﬁnd further information in the Windows XP Tablet PC 2005 Edition operating system help.

ꢀ

Handwriting recognition under Windows Vista

Handwriting recognition under Windows Vista currently supports the following languages:

English, German, French, Italian, Japanese, Korean, Chinese (traditional and

simpliﬁed), Dutch, Portuguese and Brazilian.

Handwriting recognition under Windows 7

Handwriting recognition under Windows 7 currently supports the following languages:

English, German, French, Italian, Japanese, Korean, Chinese (traditional and simpliﬁed), Dutch,

Portuguese, Spanish, Brazilian, Norwegian (Bokmål and Nynorsk), Swedish, Finnish, Danish,

Polish, Rumanian, Serbian (Cyrillic and Latin script), Catalan, Russian, Czech and Croatian.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

LCD screen

LNCoDtescreen

High-quality TFT displays are installed in notebooks from Fujitsu Technology Solutions GmbH. For

technical reasons, TFT monitors are manufactured for a speciﬁc resolution. An optimal, clear

picture can only be ensured with the correct resolution intended for the relevant TFT monitor. A

monitor resolution which differs from the speciﬁcation can result in an unclear picture.

The screen resolution of the LCD monitor of your notebook is optimally set at the factory.

The standard of production techniques today cannot guarantee an absolutely fault-free screen

display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum

permitted number of pixels faults is stipulated in the international standard ISO 9241-3 (Class II).

Example:

A monitor with a resolution of 1280 x 800 has 1280 x 800 = 1024000 pixels. Each pixel consists of

three subpixels (red, green and blue), so there are almost 3 million subpixels in total. According to

ISO 9241-3 (class II), a maximum of 2 light and 2 dark pixels and an additional 5 light or 10 dark

subpixels or a corresponding mix may be defective (1 light subpixel counts as 2 dark subpixels).

Pixel

A pixel consists of 3 subpixels, normally red, green and

blue. A pixel is the smallest element that can be generated

by complete functionality of the display.

Subpixel

Cluster

A subpixel is a separately addressable internal structure

within a pixel that enhances the pixel function.

A cluster contains two or more defective pixels or

subpixels in a 5 x 5 pixel block.

Background lighting

TFT monitors are operated with background lighting. The luminosity of the background

lighting can decrease during the period of use of the notebook. However, you can

set the brightness of your monitor individually.

Synchronising the display on the LCD screen and an external monitor

For more information, please refer to the chapter "Key combinations", Page 45

under "Display output, switch between".

Ambient light sensor

If your notebook was shipped with the Windows 7 operating system, the screen brightness is

regulated by means of the ambient light sensor and depending on the respective light conditions.

This results in optimum readability and longer battery life at the same time.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Using the device as a Tablet PC

You can execute commands as follows:

•

using the stylus pen (supplied with your device)

using your ﬁnger

Using ﬁngers

You can execute certain commands by using your ﬁnger tip on the touchscreen of your device.

Everything which you can select or activate using your ﬁnger tip can also

be selected or activated using the stylus pen.

Calibrate the Dual Digitizer for ﬁnger-based operation of the device.

Please see the appropriate supplementary sheet for instructions on how to

calibrate your device to use Dual Digitizer Technology.

Please note: There are separate calibration programs available for calibrating

the stylus pen and for calibrating ﬁnger-based operation. In each case, use the

calibration tool described in the supplementary sheet. Do not use the calibration

tool for the stylus pen to calibrate ﬁnger-based operation.

Selecting menu options (click with the left mouse button)

►

Touch the menu option with your ﬁnger tip.

Starting programs (double-click with the left mouse button)

►

Brieﬂy touch the program icon twice with your ﬁnger tip.

Moving objects/windows (drag while holding the left mouse button pressed)

►

Place your ﬁnger tip directly on the object/window, hold it pressed against the

screen and move the desired object/window.

Opening a context menu (click with the right mouse button)

►

Touch the desired item once with your ﬁnger tip.

The context menu appears.

ꢀ

Moving the cursor

►

Place your ﬁnger tip on the screen and move your ﬁnger in the direction required.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Scrolling

►

Use one ﬁnger to quickly stroke across the screen upwards, downwards, left or right to

navigate through the document or to quickly page through the document.

Dragging

►

Place your ﬁnger on an item on the screen and then move your ﬁnger without

removing it from the display; this will drag the item to another position. You can

also use this movement to page slowly through documents.

Contracting and extending

►

Touch the screen at two edges of an area with two ﬁngers spread apart, then slide the ﬁngers

together to make the area smaller. Spread the ﬁngers to make the area larger.

Rotating

►

Touch two corners of a picture on the screen, then turn the picture clockwise or

counter-clockwise at the corners by using your ﬁngers.

Enlarging a view

►

Put two ﬁngers on the touch screen

and move them apart.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Reducing a view

►

Put two ﬁngers on the touch screen and

move them towards each other.

Using the stylus pen

1 = pen tip

2 = rocker button

3 = eyelet for pen cord

4 = eraser

You can use the pen on your notebook as an electronic writing implement to select

items and to navigate through menu options and programs. Programs that support

handwriting recognition also allow you to write characters directly on the screen with

the pen. You can also use the pen as a drawing tool.

The notebook pen is retained securely in the pen slot. This ensures that the pen cannot be

lost, regardless of whether you use the notebook as a Tablet PC or as a notebook, or transport

it while travelling. Always replace the pen in its slot when you are not using it.

The notebook is supplied with a pen cord which you can attach to the eyelets

on the pen and on the notebook.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Only use the pen provided with your notebook. Do not use substitute pen tips

that were not specially designed for your notebook. Replace the stylus tip if it

is worn. The warranty does not cover a scratched screen.

While writing, you should take care not to scratch the surface of the

display (e.g. with a wristwatch or bracelet).

The pen of your notebook is an electronic instrument which can be damaged

if used incorrectly. Handle the pen with care.

The following list contains guidelines for proper pen handling:

•

Do not gesture with the pen.

Do not use the pen as a pointer.

Never use the pen on any other surface than the screen of your notebook.

Do not try to turn the thumb grip on the pen. The thumb grip is used to

place the pen in its slot and to take it out of the slot.

•

Never store the pen with the tip bearing the weight of the pen (e.g. with the tip down

in a pen holder). If the pen is stored with the tip pointing down, this may have

an adverse effect on the pen mechanism (particularly under high temperatures).

In this case the pen tip may react as though it is constantly being pressed down.

To avoid damage, the pen should be stored in the pen slot when not in use.

The pen can be inﬂuenced by electromagnetic ﬁelds (cursor quivers or

jumps). There may be a few areas on the screen where the cursor quivers

slightly in spite of pressing the pen down ﬁrmly.

The screen responds to entries made with the tip of the ﬁnger or the pen when the tip

of the ﬁnger or the pen is in direct contact with the screen.

You can use the pen to perform all the functions for which you would otherwise use a mouse.

In addition, you can conveniently delete hand-written pen entries using the pen.

Handling

Mouse

Click with the left-hand mouse Touch the menu entry with the

button.

pen tip.

Double click with the left-hand Brieﬂy touch the program icon

mouse button. twice with the pen tip.

Drag with the left-hand mouse Place the pen tip directly on

Pen

Selecting menu entries

Starting programs

Moving objects/windows

button held pressed.

the object/window. Hold the

pen tip pressed against the

screen. Move the desired

object/window.

Opening a context menu

Moving the cursor

Click with the right-hand mouse Touch the desired element with

button.

the pen and leave the pen on

the element for a moment.

Place the pen tip directly on the

screen.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Setting the pen

Operating system

Windows XP

You can access the various pen settings (for instance the pressure

sensitivity) under Fujitsu Pen Settings or Tablet and Pen Settings in the

Control Panel.

You can access the various pen settings under Start - (Settings) Control Panel –

Mobile PC – Pen and Input Device or Tablet PC Settings in the Control Panel.

Windows Vista

Windows 7

Under Hardware and Sound – Pen and Input Devices in the Control Panel

you can change various settings for the pen (assignment and function

of the rocker button).

Calibrating the pen

Before using the pen for the ﬁrst time, you should calibrate it so that the cursor follows the

movements of the pen as accurately as possible. You should also always repeat the calibration

if the co-ordination between the pen and cursor movement deteriorates.

Please note: There are separate calibration programs available for calibrating

the stylus pen and for calibrating ﬁnger-based operation. In each case, use the

calibration tool described in the supplementary sheet. Do not use the calibration

tool for the stylus pen to calibrate ﬁnger-based operation.

Operating system

Windows XP

To calibrate, run the Tablet and Pen Settings function in the Control Panel.

You need to calibrate both portrait and landscape formats.

Windows Vista

Windows 7

To calibrate, run the Tablet PC Settings function in the Control Panel. You

need to calibrate both portrait and landscape formats.

To calibrate, run the Hardware and Sound / Tablet PC Settings function in the

Control Panel. You need to calibrate both portrait and landscape formats.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Replacing the pen tip

With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.

A damaged or worn tip may not move freely, causing unpredictable results when using the pen.

If problems like these occur with your pen, you should replace the pen tip. To do

this, use the pen tip removal tool included with your pen.

►

Position the tip in the gap between the two

ends of the tool to remove the tip.

►

Pinch the two ends of the tip changer

together so that the tip is ﬁrmly clasped (1),

then pull it from the barrel.

►

Use one of the new tips that were supplied

with your pen to replace the tip. Insert

the ﬂat end of the tip into the barrel and

push it in ﬁrmly until it is in place.

Do not continue to use a tip which is worn or damaged.

Installing a pen cord

You should attach the pen with a pen cord to prevent accidentally dropping or losing it.

►

Attach the end of the pen cord with the smaller loop to your pen.

Attach the end of the pen cord with the larger loop to your notebook.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Using the device as a notebook

Touchpad and touchpad buttons

Keep the touchpad clean. Protect it from dirt, liquids and grease.

Touchpad

Do not use the touchpad if your ﬁngers are dirty.

Do not rest heavy objects (e.g. books) on the touchpad or the touchpad buttons.

1 = Touchpad

2 = Touchpad buttons

The touchpad enables you to move the mouse pointer on the screen.

The touchpad buttons allow you to select and execute commands. They correspond

to the buttons on a conventional mouse.

You can use a key combination to disable the touchpad, to avoid accidentally moving

the pointer on the screen (see also "Key combinations", Page 45).

Moving the pointer

►

Move your ﬁnger on the touchpad.

Touchpad

The pointer will move.

ꢀ

Selecting an item

►

ꢀ

Move the pointer to the item you wish to select.

Touchpad

Tap the touchpad once or press the left button once.

The item is selected.

Executing commands

►

ꢀ

Move the pointer to the ﬁeld you wish to select.

To uchpad

Tap the touchpad twice or press the left button twice.

The command is executed.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Dragging items

►

Select the desired item.

Touchpad

Press and hold the left button and drag the item to the desired position

with the ﬁnger on the touchpad.

The item will be moved.

ꢀ

Switching the Touchpad on and off

You can switch the Touchpad on and off using a key combination,

see "Key combinations", Page 45.

Keyboard

KNBeuytmboonasicrdkeypad

The keyboard of your notebook is subject to continuous wear through normal

use. The key markings are especially prone to wear. The key markings are

liable to wear away over the life of the notebook.

The keyboard has been designed to provide all the functions of an enhanced keyboard.

Some enhanced keyboard functions are mapped with key combinations.

The following description of keys refers to Windows. Additional functions supported by the keys

are described in the relevant manuals supplied with your application programs.

The ﬁgure below shows how to access the different characters on keys with overlaid functions.

The example applies when the Caps Lock key has not been activated.

The illustrations shown below may differ from your actual device.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Num

}

Alt Gr

}

Key

Description

Backspace key

The Backspace key deletes the character to the left of the cursor.

Backspace

Tab key

The Tab key moves the cursor to the next tab stop.

Tabkey

Enter key (return)

The Enter key terminates a command line. The command you have entered

is executed when you press this key.

RELinen

Caps Lock key

The Caps Lock key activates the Caps Lock mode, and the corresponding

icon is displayed in the Windows information area. In Caps Lock mode, all

of the characters you type appear in upper case. In the case of overlay

keys, the character printed on the upper left of the key will appear when

that key is pressed. To cancel the Caps Lock function, simply press the

Caps Lock key again.

SChaipft

ock

Shift key

The Shift key causes uppercase characters to appear. In the case of overlay

keys, the character printed on the upper left of the key appears when that

key is pressed.

Shiftkey

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Key

Description

Fn button

The

key enables the special functions indicated on overlay keys (see

"Key combinations", Page 45).

Fnkey

Cursor keys

The cursor keys move the cursor in the direction of the arrow, i.e. up, down,

left, or right.

Cursorkcoenystrolkeys

Start key

The Start key opens the Windows Start menu.

Startkey

Menu key

The Menu key invokes the menu for the marked item.

Virtual numeric keypad

rtmuaeLlroicumeeyrpiacdkeypad

To provide the convenience of a numeric keypad, your keyboard is equipped with a virtual

numeric keypad. The special keys of the virtual numeric keypad are recognisable by the numbers

and symbols printed in the upper right corner of each key. If you have switched on the virtual

numeric keypad, you can output the characters shown on the upper right of the keys.

The keyboard layout shown below may differ from your actual device.

Num

= Valid characters when the

key is not activated

= Valid characters when the

is activated

Further information about the status indicators can be found in chapter "Status indicators", Page 20.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Country and keyboard settings

If you want to change the country and keyboard settings, proceed as follows:

►

Enter the settings by clicking Start – (Settings) – Control Panel – Time, Regional and Language Options.

Key combinations

The key combinations described below apply when using Microsoft Windows

operating systems. Some of the following key combinations may not function in

other operating systems or with certain device drivers.

Key combinations are entered as follows:

►

Press the ﬁrst key in the combination and keep it pressed.

While holding the ﬁrst key down, press the other key or keys in the combination.

Combination

Description

Switching the loudspeakers on/off

This key combination switches the integrated loudspeakers on and

off.

Enable/disable touchpad

This key combination enables and disables the touchpad.

Decrease screen brightness

This key combination decreases the brightness of the screen.

Increase screen brightness

This key combination increases the brightness of the screen.

Decrease volume

This key combination reduces the volume of the internal

loudspeakers.

Increase volume

This key combination increases the volume of the internal

loudspeakers.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Combination

Description

Toggle output screen

FTo Fle1o0utputscreen

Use this key combination to select which screen(s) is/are used for

display if an external monitor is connected.

Screen output is possible:

•

only on the notebook’s LCD screen

only on the external monitor

on the notebook’s LCD screen and the external monitor at the

same time.

Press the key combination several times to switch through all

possible settings.

If you have connected two external monitors to the port replicator,

the following display outputs are possible:

•

only on the notebook’s LCD screen

only on the external monitor (analogue)

at the same time on the LCD screen (digital)

at the same time on the notebook’s LCD screen and on the

external monitor (analogue)

You cannot use the key combination to switch output at the same

time to both external monitors on the Port Replicator.

Halt current operation

This key combination can be used to halt an operation instantly

without clearing the keyboard buffer.

Ctrl

Back tab

This key combination moves the cursor back to the previous tab

stop.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Tablet buttons

Your notebook has ﬁve multifunction tablet buttons. You can navigate on the screen with a

simple press of a button, call preset applications or ones that you have set yourself.

The tablet buttons have different uses in different modes.

You can also program each of them individually, see "Programming

the tablet buttons", Page 52.

Basic functions when the device has booted

Button

Basic function

Scroll down

You scroll down in your document with this key.

Scroll up

You scroll up in your document with this key.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Button

Basic function

Change screen orientation

When you press the Orientation button, the orientation of the screen display

changes from portrait (vertical) to landscape (horizontal) or vice versa.

When you would like to use the Tablet PC as an eBook, for example, you would

use the portrait orientation.

When accessing spreadsheets, you would more typically use a landscape

orientation.

Open Fujitsu menu

Pressing this tablet button twice in quick succession will bring up the Fujitsu menu

on your screen. The Fujitsu menu is used to change certain system settings.

Log on to the system or open the Windows Task Manager

If you hold this tablet button down for two seconds, you can log back on to the

system again:

•

after system startup

after a system lock

when returning from power management

After log-on, pressing the tablet button for two seconds launches the Windows Task

Manager or – in the network – opens the security window.

Functions when the security system is active

If you have assigned a supervisor password and/or user password, you can enter

this via the tablet buttons when starting your device.

Button

Security functions

Security button 1 to enter the password.

Security button 2 to enter the password.

Security button 3 to enter the password.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Button

Security functions

Security button 4 to enter the password.

Security button 1 to conﬁrm the entered password.

Detailed information on how to use the security functions is contained in Section

"Using the security function of the tablet keys", Page 80.

Functions during Windows log-on

When the Windows log-on dialog is displayed, the tablet buttons provide special functions:

Button

Function

Tab key.

Enter key.

Change screen orientation

When you press the Orientation button, the orientation of the screen display

changes from portrait (vertical) to landscape (horizontal) or vice versa.

When you would like to use the Tablet PC as an eBook, for example, you would

use the portrait orientation.

When accessing spreadsheets, you would more typically use a landscape

orientation.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Button

Function

key, see "Key combinations", Page 51.

Log on to the system or open the Windows Task Manager

If you hold this tablet button down for two seconds, you can log back on to the

system again:

•

after system startup

after a system lock

when returning from power management

After log-on, pressing the tablet button for two seconds launches the Windows Task

Manager or – in the network – opens the security window.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Key combinations

Key combinations cannot be changed.

You can ﬁnd information on programming the tablet buttons in "Programming

the tablet buttons", Page 52.

Shortcut

Meaning

Starting predeﬁned application A

This button allows you to start a previously deﬁned application.

By default, the button is preconﬁgured to start the Launch Center application.

Starting predeﬁned application B

This button allows you to start a previously deﬁned application.

By default, the button is preconﬁgured to start the Windows Journal

application.

Toggle output screen

Use this key combination to select which screen(s) is/are used for display if

an external monitor is connected.

Screen output is possible:

•

only on the notebook’s LCD screen

only on the external monitor

both the LCD screen and the external monitor.

Press the key combination several times to switch through all possible

settings.

If you have connected two external monitors to the port replicator, the

following display outputs are possible:

•

only on the notebook’s LCD screen

just the external monitor (analogue)

simultaneously on the LCD screen (digital)

both the LCD screen of the notebook and the external monitor (analogue)

You cannot switch output to both external monitors on the Port Replicator

via the key combination.

The tablet button

has a practical delay function: This allows you to press

the two buttons for a shortcut one after the other instead of needing to press

them both at the same time. After pressing the

tablet button, you have a

short time (2 to 3 seconds) to press the second button.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Programming the tablet buttons

You can program the tablet buttons to open a speciﬁc application or execute

a speciﬁc function when pressed.

Proceed as follows:

►

In Control Panel, select the option to manage the settings for the tablet buttons and pen.

Follow the instructions on the screen and program the tablet buttons as you require.

Webcam

Depending on the device version, your device may have an integral

Webcam with microphone.

Depending on the software used, you can use your Webcam to take pictures,

record video clips or take part in web chats.

•

The picture quality depends on the lighting conditions and the software being used.

You can only operate the webcam with a particular application (e.g. an Internet telephony

program or a video conferencing program which supports a webcam).

•

When using the webcam the notebook support must not wobble.

The webcam automatically adjusts itself to the current light level. For this reason

the LCD screen may ﬂicker while the light level is adjusted.

Further information on use of the webcam and additional settings can be found

in the help function of the program which uses the webcam.

If you wish to carry out a function test with your webcam, you can use the

corresponding test software available at "http://ts.fujitsu.com/support/".

Rechargeable battery

BLRiaefetctehraayrtgteerayblebattery

When not plugged into a mains socket, the notebook runs on its built-in battery. You

can increase the life of the battery by caring for the battery properly. The average

battery life is around 500 charge/discharge cycles.

You can extend the battery life by taking advantage of the available energy saving functions.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Charging, caring for and maintaining the battery

Battery

The notebook battery can only be charged, when the ambient temperature

is between 5°C and max. 35°C.

You can charge the battery by connecting the notebook to the mains adapter

(see "Mains adapter connecting", Page 18).

You can increase the life of your battery by allowing it to fully discharge before recharging it again.

To do this, leave your notebook turned on while operated by the battery. Once the battery is running

low, you will hear a warning alarm. If you do not connect the mains adapter within ﬁve minutes of

the warning alarm described above sounding, your notebook will automatically switch off.

monitoring the battery charging level

Batterystatusmeter

Windows also has a "Battery status meter" in the taskbar for monitoring the battery capacity. When

you place the mouse pointer on the battery symbol, the system displays the battery status.

The battery capacity can be monitored using an indicator which shows the current state

of charge. Use the following menu to enable this feature:

Operating system

Windows XP

Start – (Settings) – Control panel–Power options

Start - (Settings) - Control panel - Hardware and

Sound - Power options

Windows Vista

Start – (Settings) – Control panel – Mobile PC –

Power options

Windows 7

The indicator is then displayed in the task bar as a battery symbol. When you place the

mouse pointer on the battery symbol, the system displays the battery state of charge. Please

refer to the Help facility of the operating system for more information.

Battery storage

BSCaehtlaft-erdgriyi

bitya,

tbte ttery

Keep the battery pack between 0°C and +30°C. The lower the temperature at which

the batteries are stored, the lower the rate of self-discharge.

If you will be storing batteries for a longer period (longer than two months),

the battery charge level should be approx. 30 %. To prevent exhaustive

discharge which would permanently damage the battery, check the level

of charge of the battery at regular intervals.

To be able to make use of the optimal charging capacity of the batteries, the battery

should be completely discharged and then fully recharged.

If you do not use the batteries for long periods, remove them from the

notebook. Never store the batteries in the device.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing and installing the battery

Only use rechargeable batteries approved by Fujitsu Technology

Solutions for your notebook.

Never use force when ﬁtting or removing a battery.

Make sure that no foreign bodies get into the battery connections.

Never store a battery for longer periods in the discharged state. This

can make it impossible to recharge.

Removing a battery

►

Press in the two catches (1), keep them pressed and lift the battery out

of the battery compartment (2).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Installing a battery

►

Position the battery at the edge of the casing (1).

Push the battery into the battery compartment until it locks into position (2).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Batteries with a capacity of 5800 mAh

With these batteries you can check the state of charge directly on the battery itself.

►

Remove the battery (see "Removing and installing the battery", Page 54).

►

Press the key (1).

The LED (a) lights up in one of the following colours:

ꢀ

LED indicator

State of charge

Green

The battery is between 50 % and 100 % charged.

The battery is between 13 % and 49 % charged.

The battery is charged somewhere between 1 % and 12 %.

The battery is fully discharged.

Orange

Red

LED not lit

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Module

Modulesbay

The design of your notebook enables the ﬂexible use of notebook batteries and drives. The

following modules can be operated in the module bay of your notebook:

•

Second battery

Second hard disk drive

Optical drive

Empty plug-in unit (save weight)

Only use modules designed for your notebook.

Do not use force when installing or removing the module.

Make sure that no foreign objects enter the module bay.

You can swap modules during operation. This means you do not

need to switch off the notebook.

To replace a module, simply click on the corresponding icon in the

task bar and then on Exit or Select - Exit.

The module can now be removed without any further actions being necessary.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing a module

MDW

oeivdigehletSaver

►

Press the unlocking lever in the direction of the arrow.

Now pull the module out of the module bay.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Installing a module

►

Place the module into the module bay so that the contacts enter ﬁrst.

Push the module into the module bay until you feel it locking into place.

Optical drive

Opticaldrive

This product contains a light emitting diode, classiﬁed in accordance with IEC

8251:1993: LASER CLASS 1, and must therefore not be opened.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Handling data carriers

Handling

Observe the following guidelines when handling data carriers:

•

Avoid touching the surface of a data carrier. Only handle data carriers by their edges.

Always store data carriers in their cases. This will protect the data carrier against

being covered in dust, scratched or damaged in any other way.

•

Protect your data carriers against dust, mechanical vibrations and direct sunlight.

Avoid storing a data carrier in areas subject to high temperatures or humidity.

You may use both 8-cm and 12-cm data carriers in the optical drive.

When using a data carrier of lesser quality, vibrations and reading errors may occur.

CD/DVD indicator

CD/DVDindicator

The CD/DVD indicator ﬂashes when a data carrier is inserted. The indicator goes out when

the drive is ready for reading. The indicator lights up when the drive is being accessed.

You may only remove the data carrier when the indicator is unlit.

If the CD/DVD indicator does not go out after a data carrier has been inserted, but

instead continues to ﬂash, this means that the drive cannot access the data carrier.

Either the data carrier is damaged or dirty or you are using a data

carrier that the drive cannot read.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Inserting or removing a data carrier

IRnesmerotivnigng

The notebook must be switched on.

►

Push the insert/eject button (1).

The drive tray will open.

ꢀ

►

Gently pull the drive tray (2) completely out.

►

Place the data carrier in the drive tray with

the printed side facing upwards.

►

Remove a data carrier that has

been inserted.

Push in the drive tray until you

feel it lock into place.

Manual removal (emergency removal)

CMEmDan/e

rgVaelD

myorevmalo

adalotafd

traricarrrier

In the event of a power failure or damage to the drive, you can remove the data carrier manually.

►

Switch your notebook off.

Push a pen or a piece of wire (such as a

paperclip) ﬁrmly into the opening (1).

The drive tray is ejected. You can now pull

the drive tray (2) out of the drive.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing and ﬁtting the dust removal cover

(ventilation slot cover)

In order to ensure optimum cooling of the components in your notebook, you

should periodically clean the ventilation slot of the heatsink.

This ensures optimum fan performance. You can achieve the best cleaning

results with a small hand-held vacuum cleaner.

If necessary, you can also use a dry brush to release dust from the ventilation slots.

Do not use any cleaning liquids! Ensure that no liquid enters the device.

Be sure that you do not damage the ventilation blades in the process. Do

not use any abrasives for cleaning purposes.

To avoid overheating of the device, do not remove the ventilation slot

cover when the device is switched on.

►

Prepare for removal, see chapter "Preparing to remove components", Page 90.

►

Press and hold the lock of the ventilation

slot cover (1) and remove it from its slot (2).

►

Clean the dust chamber with a dry brush.

►

Insert the ventilation slot cover into the

slot (1) at an angle as shown, and ensure

that you feel it click into place.

Complete the removal, see chapter

"Finishing component removal", Page 96.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Using the power-management features

PBoawtte

The notebook uses less power when the available power-management features are used. You

will then be able to work longer when using the battery before having to recharge it.

Power efﬁciency is increased and environmental pollution reduced. By

choosing the best power options, you can make signiﬁcant savings and

at the same time help protect the environment.

When you fold down and close the LCD screen, depending on the setting in Windows,

the notebook automatically enters a power saving mode.

We recommend the following settings:

Function

On external power

After 10 minutes

After 15 minutes

After 20 minutes

After 1 hour

On battery power

After 5 minutes

After 10 minutes

After 15 minutes

After 30 minutes

Turn off monitor

Turn off hard disk(s)

Energy saving (S3)

Hibernate mode (S4)

►

Select the power management functions in your Control Panel.

Select the Screen Saver in your Control Panel.

►

Right-click on the desktop. Switch on the screen saver by clicking Personalization –

Change screen saver.

If you need further information about an option, you can get help with most

settings by pressing

to open the Microsoft Help.

When the notebook is in power-saving mode, the following must be remembered:

During power saving mode, open ﬁles are held in the main memory

or in a swap ﬁle on the hard disk.

Never turn off your notebook while it is in a power saving mode. If the built-in battery is

nearly ﬂat, close the open ﬁles and do not go into power saving mode.

If you do not intend to use your notebook for a long period of time:

►

Exit power saving mode if necessary via the mouse or keyboard or by switching on the

notebook.

Close all opened programs and completely shut down the notebook.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Memory cards

Slot

Your notebook is equipped with an integrated memory card reader.

Observe the manufacturer’s instructions when handling the memory cards.

Memorycard

Supported formats

It supports the following formats:

•

Secure Digital (SD^TMcard)

Memory Stick

Memory Stick Pro

Inserting the memory card

►

Carefully slide the memory card into the

slot. The label should be facing upward. Do

not apply excessive force, as otherwise the

delicate contact surfaces could be damaged.

Memorycard

Depending on the particular type

used, the memory card may protrude

slightly from the slot.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing the memory card

Memorycard

In order to protect your data, always follow the correct procedure

for removing the card outlined below.

You can stop the memory card via the corresponding icon in the task bar:

►

ꢀ

Left-click on the icon.

Select the card you want to stop and remove.

Press the Enter key.

Wait for the dialogue box which tells you that it is now safe to remove the memory card.

►

On devices with card locking: Press

on the storage card (1).

Memorycard

The storage card is released and

can now be removed.

ꢀ

►

Pull the storage card out of the slot (2).

ExpressCards

SExloptressCard

An ExpressCard slot enables operation of an ExpressCard/34 or ExpressCard/54.

Consult the documentation supplied by the ExpressCard’s manufacturer

and follow the instructions provided.

Never use force when installing or removing an ExpressCard.

Make sure that no foreign objects enter the ExpressCard slot.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Inserting the card

Keep the placeholder for the slot in a safe place. When you remove the card again you

must reinstall the placeholder. This prevents foreign bodies from getting into the slot.

►

If the eject button (1) is recessed, press it

once so that it disengages. Now press the

eject button again so that the placeholder

protrudes slightly from the notebook.

Pull the card placeholder out of the slot (2).

►

Insert the card into the slot guide with

the connection contacts ﬁrst.

Gently push the card into the slot either

until it will go no further or you feel it

engage. Do not use excessive force.

Depending on the type, the card may

protrude slightly from the slot.

Please see the documentation relating to the card for driver installation instructions.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Removing the card

Always remove the card according to the rules described below, to

ensure that none of your data is lost.

You can stop the card using the corresponding icon in the task bar:

►

ꢀ

Left click on the icon to safely remove hardware, located in the taskbar.

Select the card you want to stop and remove.

Press the "Enter" key.

Wait for the dialog box which tells you that it is now safe to remove the card.

►

If the eject button is lowered, you must

ﬁrst cause the eject button to release

from the notebook casing. To do this,

press the eject button until it pops out.

Press the eject button (1) so that the card

protrudes a little from the notebook.

►

Pull the card out of the slot (2).

►

Insert the card placeholder into the

slot guide.

Carefully slide the placeholder for the

card as far as it will go into the slot.

Do not use excessive force.

Loudspeakers and microphones

MLBVoaiculsurdsomslpopehuecodaonsknep

ter saker(subwoofer)

Information on the exact position of the speakers and microphone can be

found in "Ports and controls", Page 9.

Please refer to chapter "Key combinations", Page 45 for information on setting the volume

and also enabling/disabling the loudspeakers using key combinations.

If you attach an external microphone, the built-in microphone is disabled.

When you connect headphones or external speakers, the built-in speakers are disabled.

Information on connecting headphones and a microphone can be found

in "Connecting external devices", Page 83.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

SIM card

A SIM Card (Subscriber Identity Module) is a chip card which is inserted in a mobile telephone or

notebook to enable access to a mobile radio network in conjunction with an installed UMTS module.

Follow the instructions supplied by the provider of the SIM card.

The SIM card slot is located in the battery compartment and can only

be accessed when the battery is removed.

Inserting the SIM card

►

Prepare for insertion of the SIM card, see chapter "Preparing to remove components", Page 90.

If necessary, open the clip (a) of the SIM card.

►

Slide the SIM card into the slot (1)

until it engages, as shown in the

battery compartment.

►

Slide the SIM card lock (a) in the

direction of the arrow (2).

►

Complete the insertion, see chapter "Finishing component removal", Page 96.

Removing a SIM card

►

Prepare for removal of the SIM card, see chapter "Preparing to remove components", Page 90.

►

Slide the SIM card lock (a) in the

direction of the arrow (1).

Press on the edge of the SIM card so that

it jumps up slightly out of the slot.

Pull the SIM card out of the slot in the

direction of the arrow (2).

►

Complete the removal, see chapter "Finishing component removal", Page 96.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Wireless LAN / Bluetooth / UMTS

The installation of radio components not approved by Fujitsu Technology Solutions

will invalidate the certiﬁcations issued for this device.

Switching the wireless components on and off

Before switching on your device for the ﬁrst time, the on/off switch for

radio components must be in the "ON" position.

►

Slide the ON/OFF switch into the "ON"

position to activate the radio components.

WBluiretloeossthLAN

►

Slide the ON/OFF switch to the

"OFF" position to deactivate the

radio components.

If you switch off the radio components, the wireless LAN transmission unit (antenna)

and, if present, the Bluetooth and UMTS module will also be switched off.

You can enable and disable the installed radio components individually

using the WirelessSelector programme

You can also deactivate the wireless components individually in the BIOS Setup.

For this to occur, you must either not have assigned a supervisor password or if a

supervisor password has been assigned, you must know this password.

Pay attention to the additional safety notes for devices with wireless

components provided in the "Safety" manual.

Details on using Wireless LAN can be found in the online help system

included in the Wireless LAN software.

You can ﬁnd more information on how to use Bluetooth on the CD you

received with your Bluetooth software.

You can obtain more information on UMTS from your service provider.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Setting up WLAN access

•

Requirement: A WLAN must be available and you must have the

corresponding access information.

Information on conﬁguring the WLAN access can be found in the

documentation for your operating system.

Access via UMTS

If you ordered an integrated UMTS module with your system, you can enjoy optimum

reception and maximum energy efﬁciency without awkward cables or antennas. The

optional UMTS module is ready for use straight away.

If you did not order a UMTS module, you can purchase the accessories for UMTS reception

from your retailer or your Fujitsu Technology Solutions dealer.

You will ﬁnd information on establishing the connection with the UMTS network

in the documentation for the hardware used.

You can connect your device with the Internet via UMTS. To do this, use one

of the following types of connection:

•

a USB dongle (a USB stick with your mobile phone provider’s SIM card)

UMTS ExpressCard (for inserting in the ExpressCard slot of your device)

mobile end-device (e.g. mobile phone with Bluetooth or cable connection)

Ethernet and LAN

EthernetLAN

The internal network module of your notebook supports Ethernet LAN. You can use it to

establish a connection to a local network (LAN = Local Area Network).

►

Connect the network cable to the LAN

port of the notebook (1).

►

Connect the network cable to your

network connection (2).

Your network administrator can help you to conﬁgure and use the LAN connections.

The network cable is not included in the delivery scope. This type of

cable can be obtained from a specialist dealer.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Your Port Replicator

The Port Replicator is only available for the LIFEBOOK T4410.

The Port Replicator is a device that helps you to quickly connect your notebook to

your peripheral devices, such as a monitor, printer etc.

The features offered by the Port Replicator include standard ports for

monitor, audio, mouse and keyboard.

You need only dock the notebook in order to work with your peripheral devices.

Ports on the Port Replicator

PortsReplicator

The Port Replicator is only available for the LIFEBOOK T4410 !

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

= USB ports

= Device for adjusting the Port Replicator

to the size of the notebook.

= DVI port

= Connector on the Port Replicator for

the docking port on the underside

of the notebook

= VGA monitor port

= LAN port

= Headphone port

= Kensington Lock

10 = Release lever

11 = ON/OFF switch

= DC input connector (DC IN)

The notebook’s HDMI connection cannot be used when the notebook

is connected to the port replicator.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Connecting the notebook to the Port Replicator

If you connect the notebook to the Port Replicator during operation, problems can

occur. We recommend that you switch off the notebook beforehand.

The mains adapter must be connected to the Port Replicator when the

notebook is connected to the Port Replicator.

We recommend that the notebook is not operated with the LCD screen closed when

the notebook is connected to the Port Replicator. The resulting overheating can

cause reduced performance and increased activity of the integrated fan.

PortReplicator

►

Switch the notebook off.

►

Remove the mains plug for the mains adapter from the mains socket.

Disconnect the mains adapter cable from the DC socket (DC IN) of the notebook.

The Port Replicator must be adjusted to the size of your notebook. To

do this, the device marked in grey in the diagram must be moved from

position A to position B on the Port Replicator:

►

Hold the device at the positions marked with (1).

Slide the device in the direction of the arrow (2) ﬁrst slightly to the left and then

away from yourself until it engages in position B.

►

Place the notebook onto the Port Replicator (3) and ensure that it locks into place correctly.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Connecting the mains adapter to the Port Replicator

►

Connect the mains adapter cable to the DC

jack (DC IN) of the Port Replicator (1).

Connect the power cable to the

mains adapter (2).

Plug the power cable into the mains

socket (3).

When the notebook is connected to a Port Replicator, the operating system creates

a hardware proﬁle for the "Docked" mode. In this proﬁle, for example, the setting is

saved as to which monitor was last used for output. This proﬁle will be loaded, as

soon as the notebook is connected to a Port Replicator of the same type.

Switching on the notebook via the port replicator

►

Press the ON/OFF switch on the port

replicator to switch the notebook on.

The power-on indicator of the Port

Replicator lights up.

ꢀ

Switching off notebook via Port Replicator

►

Close all applications and shut down your operating system (please refer

to the manual for the operating system).

If the notebook cannot be shut down properly, press the ON/OFF button

on the Port Replicator for approx. four seconds. The notebook will switch

off. Any unsaved data may however be lost.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Working with the notebook

Disconnecting the notebook from the Port Replicator

Problems may occur if the notebook is removed from the Port Replicator during

operation. We recommend that the notebook is switched off or that the appropriate

undocking function provided by the operating system is executed.

►

Switch the notebook off.

►

Pull the unlocking lever in the direction of the arrow (1), until you hear the notebook unlatch.

Lift off the notebook (2).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Securityfunctions

Your notebook has several security features that you can use to secure your

system from unauthorised access.

This chapter explains how to use each function, and what the beneﬁts are.

Please remember that in some cases, for example, forgetting your password,

you may be locked out and unable to access your data. Therefore,

please note the following information:

•

Make regular backups to external storage devices such as external

hard drives, CD or DVD disks.

•

Some security functions need you to choose passwords. Make a note

of the passwords and keep them in a safe place.

If you forget your passwords you will need to contact the our Service

Desk. Deletion or resetting of passwords is not covered by your warranty

and a charge will be made for assistance.

Brief overview of security functions

Detailed information about the security equipment of your device can be found

in the "Professional Notebook" manual, on the "Drivers & Utilities" CD/DVD

or on our website at "http://ts.fujitsu.com/support/".

Security functions

Type of protection

Preparation

Kensington Lock

Mechanical

Fit and lock Kensington

MicroSaver (accessory).

Fingerprint sensor (depending Biometric

on the device)

Install the supplied ﬁngerprint

software.

BIOS password protection

Password protection for BIOS

Setup, operating system and

hard disk with supervisor and

Specify at least one supervisor

password in the BIOS Setup

and activate the password

user password. The passwords protection for the operating

consist of a maximum of eight system and hard disk as

alphanumeric characters.

Prevents unauthorised booting In the BIOS Setup, go to the

of an operating system from

Security menu and edit the

external media (e.g. USB stick, option Boot from Removable

USB CD-ROM drive etc.).

Media.

Overlay service desk or owner In the BIOS Setup, go to the

desired.

Boot from removable media

Owner Information

information during the boot

process.

Security menu and edit the

option Owner Information.

Trusted Platform Module

(device dependent)

Identiﬁcation and authentication Deﬁne a supervisor password

of the notebook

in the BIOS Setup and enable

the TPM (Security Chip).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Conﬁguring the ﬁngerprint sensor

Fingerprintsensor

Whether or not your device has a ﬁngerprint sensor depends on the

device conﬁguration you have ordered.

The ﬁngerprint sensor can record an image of a ﬁngerprint. With additional ﬁngerprint

software, this image can be processed and used instead of a password.

►

You must install the ﬁngerprint software

in order to be able to use the

ﬁngerprint sensor (1).

Use Kensington Lock

Your device comes with a Kensington Lock device for the Kensington MicroSaver. With

the Kensington MicroSaver, a sturdy steel cable, you can help protect your notebook from

theft. The Kensington MicroSaver is available as an accessory.

►

Fit the Kensington MicroSaver on the

device on your notebook.

KUMAens

nitcni-s

gtihan

fitcoe

rlosMbtianeiccgcrk

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Conﬁguring password protection in BIOS Setup Utility

Before using the various options for password protection in the BIOS Setup utility

to increase data security, please observe the following:

Make a note of the passwords and keep them in a safe place. If you forget your

supervisor password you will not be able to access your notebook. Passwords are

not covered by your warranty and a charge will be made for assistance.

Passwordprotection

Your password can be up to eight characters long and contain letters and numbers.

No distinction is made between uppercase and lowercase.

Protecting BIOS Setup Utility (supervisor and user password)

If you have opened these operating instructions on the screen, we recommend that

you print out the following instructions. Because you cannot call the instructions

onto the screen while you are setting up the password.

BIOSSetupUtility

You prevent unauthorised use of the BIOS Setup Utility with both the supervisor and the user

password. The supervisor password gives you access to all functions of the BIOS Setup

Utility, while the user password only provides some of the functions. You can only set a

user password if a supervisor password has already been assigned.

Please refer to the ""Settings in BIOS Setup Utility", Page 97 section for a

description of how to call up and operate the BIOS Setup Utility.

Setting supervisor and user password

►

Start the BIOS Setup Utility and go to the Security menu.

Select the Set Supervisor Password ﬁeld and press the Enter key.

With Enter new Password: you are asked to enter a password.

Enter the password and press the Enter key.

ꢀ

►

Conﬁrm new Password requires you to conﬁrm the password.

Enter the password again and press the Enter key.

ꢀ

►

Changes have been saved is a conﬁrmation that the new password has been saved.

ꢀ

►

To set the user password, select Set User Password and proceed exactly as

when conﬁguring the supervisor password.

If you do not want to change any other settings, you can exit BIOS Setup Utility.

In the Exit menu, select the option Save Changes & Exit.

Select Yes and press the Enter key.

ꢀ

►

PSUausspeserpwrvaoisrsdo

pardssword

The notebook will be rebooted and the new password will come into effect. It will now be

necessary to ﬁrst enter your supervisor or user password in order to open the BIOS Setup Utility.

Please note that the user password only provides access to a few of the BIOS settings.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Changing the supervisor or user password

You can only change the supervisor password when you have logged into the

BIOS Setup Utility with the supervisor password.

PSUausspeserpwrva

srsdo

rpordssword

►

Call the BIOS Setup Utility and go to the Security menu.

When changing the password, proceed exactly as for password assignment.

Removing passwords

To remove a password (without setting a new password) perform the following steps:

PSUausspeserpwrva

srsdo

rpordssword

►

ꢀ

Start the BIOS Setup Utility and go to the Security menu.

Highlight the Set Supervisor Password or Set User Password ﬁeld and press the Enter key.

You will be requested to enter the current password by the Enter Current Password prompt.

You will be requested to enter a new password by the Enter New Password prompt.

Press the Enter key twice.

►

ꢀ

In the Exit menu, select the option Save Changes & Exit.

Select Yes and press the Enter key.

The notebook will now reboot with the password removed.

Removing the supervisor password simultaneously deactivates the user password.

Password protection for booting of the operating system

With the supervisor password you have set in the BIOS Setup Utility (see

section "Setting supervisor and user password", Page 78), you can also

prevent booting of the operating system.

Operatingsystem

Activating system protection

►

ꢀ

Start the BIOS Setup Utility and go to the Security menu.

Operatingsystem

Select the Password on Boot option and press the Enter key.

Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key

Select the Save Changes & Exit option under Exit.

The notebook will reboot. You will be prompted to enter your password (the supervisor password).

Deactivating system protection

►

Start the BIOS Setup Utility and go to the Security menu.

Operatingsystem

Select the Password on Boot option and press the Enter key.

Select the Disabled option and press the Enter key.

If you do not want to change any other settings, you can exit BIOS Setup Utility.

Select the Save Changes & Exit option under Exit.

ꢀ

►

The notebook will reboot. The system is no longer password-protected.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Using the security function of the tablet keys

If you have assigned a supervisor password and/or user password in the form of

a combination of tablet button presses, as described below, you can enter this

via the tablet buttons when starting your device.

Setting the Supervisor password

►

Select Start - Run.

Enter the following at the command line: C:\Program Files\Fujitsu\Security

Panel Application\Supervisor\FJSECS.EXE.

Enter

►

Conﬁrm with

Follow the instructions on the screen.

Setting the User password

►

Select Start - All Programs.

Select Security Panel Application – Security Panel Application.

Follow the instructions on the screen.

Entering passwords using the tablet buttons

The passwords to be entered via the tablet buttons are usually composed of a combination of

ENT

and the button.

button presses, e.g. button

+ button

Enter your password using the buttons

ENT

followed by button

►

ꢀ

Conﬁrm by pressing

The device will be unlocked.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Trusted Platform Module (TPM) (device-dependent)

TrPuMstedPlatformModule

The following description applies only to the LIFEBOOK T4410.

To use the TPM, you must activate the TPM in the BIOS Setup before the software

is installed. The condition for this is that you have assigned at least the supervisor

password (see "Security functions", Page 76).

Options for using the TPM

You can use the TPM in different ways:

SmartCase^TMLogon+

SmartCase^TMLogon+ offers additional help with managing and

using the numerous passwords required to work with the computer.

To install, conﬁgure and use SmartCase^™Logon+, please refer to

the documentation and online help on the CD with the SmartCase^™

Logon+ software.

Security API

Smart Security API 4.1 is middleware which supports the entire

range of mobile and stationary clients from Fujitsu Technology

Solutions. Independent of the TPM hardware, it is needed

by everyone who uses a PKI Smart Security environment for

identiﬁcation purposes.

Microsoft® BitLocker

BitLocker Drive Encryption (BDE) is a feature of Microsoft® Vista

Enterprise and Ultimate Editions for encryption of the hard disk

drive. Here, BitLocker uses the TPM for the storage of the recovery

data which are used for decryption of the partition.

It is also possible to use BitLocker without TPM and only to use

the USB dongle for storing the crypto key. This option is mainly of

interest if Vista is installed on a computer on which TPM is not

installed or an older version (before Version 1.2) is installed.

For BitLocker to work, you must have set up at least two partitions

on your hard drive. The ﬁrst partition contains the boot information.

The second, larger partition is encrypted and contains the operating

system as well as the user data.

Important: The partitions must be set up before Windows Vista

is installed.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Security functions

Enabling TPM

•

Requirement: You have assigned a supervisor password, see "Security functions", Page 76.

Call up the BIOS Setup and select the Security menu.

►

ꢀ

Mark the TPM Security Chip Setting ﬁeld and press the Enter key.

Select Enabled to activate the TPM.

Once you have activated the TPM the Clear Security Chip option appears.

Select Clear Security Chip to delete the holder in the TPM. By clicking on Enabled,

all secret keys (e.g. SRK - Storage Root Keys, AIK - Attestation Identity Keys

etc.) generated by applications are deleted.

Please note that you will then no longer be able to access the data you have

encrypted with the keys based on that holder.

►

ꢀ

Select the Exit Saving Changes option in the Exit menu.

Press the Enter key and select Yes.

The notebook will restart, and TPM will be enabled after the reboot.

Disabling TPM

•

Requirement: You have assigned a supervisor password, see "Security functions", Page 76.

Call up the BIOS Setup and select the Security menu.

Mark the TPM Security Chip Setting ﬁeld and press the Enter key.

Select Disabled to deactivate the TPM.

►

ꢀ

From the Exit menu, choose the option Exit Saving Changes.

Press the Enter key and select Yes.

Your notebook will now restart and TPM will be disabled.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Always refer to the safety information provided in "Important notes", Page 14 before

connecting or disconnecting any devices to or from your notebook.

Always read the documentation supplied with the device you wish to connect.

Never connect or disconnect cables during a thunderstorm.

Never pull at a cable when disconnecting it. Always grasp the plug.

Follow the steps below in order, when connecting or disconnecting

devices to your notebook:

With some devices such as USB devices, it is not necessary to switch off

the notebook and the device before connecting/disconnecting. For more

information about whether or not devices need to be switched off, please refer

to the documentation supplied with the external device.

Some of the external devices require special drivers (see the operating

system and external device documentation).

Connecting devices to the notebook

1. Turn off your notebook and all external devices.

2. Unplug your notebook and all devices from the mains sockets.

3. Connect the cables for your external devices following the instructions.

4. Plug all power cables into the mains sockets.

DPerviip

eraldevices

Disconnecting devices from the notebook

1. Turn off your notebook and all external devices.

2. Unplug your notebook and all devices from the mains sockets.

3. Disconnect the cables for your external devices following the instructions.

DPerviip

eraldevices

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Connecting an external monitor

You can connect an external monitor to the analogue VGA monitor connection of the

notebook. Screen output is limited to a maximum of two screens at any one time (see

"Key combinations", Page 45, section "Toggle output screen").

VSMGc

rnAe

ectono

noerrtctionsocket

Analogue VGA monitor connection socket

►

Switch off the notebook and the external monitor.

Connect the data cable of the external monitor to the monitor port of the notebook.

First switch on the external monitor and then the notebook.

You can also use a key combination to switch back and forth between the external

monitor and the notebook’s LCD screen, see chapter "Key combinations", Page 45.

You can display the same picture on the external monitor and the

notebook LCD screen simultaneously.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

HDMI port

HDMIport

Depending on the device version, your device may have an integral HDMI port.

The HDMI port of your notebook can be used to connect an external ampliﬁer,

LCD TV or a plasma TV with an HDMI connection.

►

Connect the data cable to the

external device.

►

Connect the data cable to the HDMI

port of the notebook.

Some LCD televisions have only two loudspeaker connections and therefore

cannot reproduce Dolby digital or DTS. In order to reproduce the sound, you

must go into Windows and adjust the sound settings.

Proceed as follows:

►

Select Startsymbol – (Settings) – Control Panel – Hardware and Sound – Sound.

Mark Realtek HDMI Output.

Select Properties – Supported formats.

Deactivate the settings DTS audio and Dolby digital.

Conﬁrm the settings with OK.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Connecting USB devices

USBports

On the USB ports, you can connect external devices that also have a USB port

(e.g. a DVD drive, a printer, a scanner or a modem).

USB devices are hot-pluggable. This means you can connect and disconnect

devices while your operating system is running.

USB 1.x has a maximum data transfer rate of 12 Mbit/s.

USB 2.x has a data transfer rate of up to 480 Mbit/s.

Additional information can be found in the documentation for the USB devices.

►

Connect the data cable to the

external device.

Connect the data cable to a USB

port of the notebook.

Device drivers

USB devices will be automatically recognised and installed by your operating system.

How to remove USB devices correctly

Always correctly remove the device according to the rules described below,

to ensure that none of your data is lost.

►

ꢀ

Left click on the icon to safely remove hardware, located in the taskbar.

Select the device which you want to shut down and remove.

Press the Enter key.

Wait for the dialogue box which tells you that it is now safe to remove the device.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Connecting FireWire devices

CVFi

dircetiv:nicg

,dcio

ictiens

External devices such as digital audio/video devices or other high-speed devices can be connected

to the FireWire port. The FireWire port operates at a speed of up to 400 Mbit per second.

FireWire devices are hot-pluggable. Therefore, the cables of FireWire devices

can be connected and disconnected with the system switched on. Additional

information is provided in the documentation for the FireWire devices.

►

Connect the data cable of the external devices to the FireWire port of the notebook.

Plug the power cable of the external device into the mains socket.

Connecting external audio devices

Microphone port / Line In

vrtn

e,sc,o

netcintigng

The microphone port/Line In allows you to connect an external microphone, a MiniDisc

player, MP3 player, CD player or a tape deck to your notebook.

►

Connect the audio cable to the

external device.

►

Connect the audio cable to the microphone

port/Line In of the notebook.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting external devices

Headphone port

ACuodnin

otrintsgahuedaid

icess

You can connect headphones or external loudspeakers to your notebook via the headphone port.

►

ꢀ

Connect the audio cable to the

external device.

Connect the audio cable to the headphone

port of the notebook.

The internal loudspeakers are disabled.

If you purchase a cable from a retailer, please note the following information:

The headphone port on your notebook is a "3.5 mm jack socket".

If you want to connect headphones or a speaker you will need a "3.5 mm jack plug".

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing and installing components

during servicing

Only qualiﬁed technicians should repair your notebook. Unauthorised

opening or incorrect repair may greatly endanger the user (electric shock,

ﬁre risk) and will invalidate your warranty.

Servicing

Components

After consulting the Hotline/Service Desk, you may remove and install the

components described in this chapter yourself.

If you remove and install components without consulting the Hotline/Service

Desk, then the warranty of your notebook will be voided.

Notes on installing and removing boards

and components

•

Switch the notebook off and pull the power plug out of the mains socket.

Always remove the battery.

Take care when you use the locking mechanisms on the battery and any other component.

Never use sharp objects such as screwdrivers, scissors or knives as leverage to remove covers.

NBEoSatDerds

Boards with electrostatic sensitive devices (ESD) are marked with the label

shown.

When handling boards ﬁtted with ESDs, you must always observe the following

points:

•

You must always discharge static build up (e.g. by touching a grounded

object) before working.

•

The equipment and tools you use must be free of static charges.

Remove the power plug from the mains supply before inserting or removing

boards containing ESDs.

•

Always hold boards with ESDs by their edges.

Never touch pins or conductors on boards ﬁtted with ESDs.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Preparing to remove components

If you are going to remove or change system components, prepare for the removal as follows:

Please observe the safety information in chapter "Important notes", Page 14.

Remove the power plug from the mains outlet !

►

Switch the device off.

The device must not be in energy-saving mode !

►

Close the LCD screen.

Remove all the cables from the device.

Turn the device over and place it on a stable, ﬂat and clean surface. If necessary, lay an

anti-slip cloth on this surface to prevent the device from being scratched.

►

Remove the battery (see "Removing a battery", Page 54).

Installing and removing memory expansion

MRSyeea

minte

vreiyenmgxop

ardyenu

sleiorn

If you are asked by the Hotline/Service Desk to remove and install the memory

expansion yourself, proceed as follows:

Please observe the safety information in chapter "Important notes", Page 14.

When installing/removing memory modules, the battery must be removed from

the notebook and the notebook must not be connected to the power supply,

see "Preparing to remove components", Page 90.

Only use memory expansion modules that have been approved for your

notebook (see "T e chnical data", Page 107).

Never use force when installing or removing a memory extension.

Make sure that foreign objects do not fall into the memory extension compartment.

You must open the service compartment to remove or install a memory module. On some devices,

opening the compartment may expose other components. These components should be removed

and replaced only by authorised specialists. Therefore, be sure to observe the following:

Individual components can become very hot during operation. Therefore, we

recommend that you wait one hour after switching off the notebook before removing

or installing memory modules. Otherwise, there is a risk of suffering burns!

As some components are exposed that are sensitive to static electricity, please take

note of chapter "Notes on installing and removing boards and components", Page 89.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing a cover

►

Remove the screws (1).

Pull off the cover from the notebook in the direction of the arrow (2).

Removing memory modules

►

Carefully push the two mounting

clips outwards (1).

Memoryem

anlseion

The memory module snaps upwards (2).

ꢀ

►

Pull the memory module out of its slot

in the direction of the arrow (3).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Installing a memory module

Memory bank 0 must always be loaded.

►

Insert the memory module with the contacts

and the recess (a) facing the slot (1).

Memoryem

anlseion

Carefully push the memory module

downwards until you feel it click

into place (2).

Attaching the cover

►

Place the cover into position, following the direction of the arrow (1).

Secure the cover with the screws (2).

Install the battery again (see "Removing and installing the battery", Page 54).

Turn the notebook the right way up again and place it on a ﬂat surface.

Reconnect the cables that were previously disconnected.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing and installing the hard disk

Removing a cover

•

Requirement: The dust chamber cover is removed, see "Removing and ﬁ tting the

dust removal cover (ventilation slot cover)", Page 62.

►

Remove the screws (1).

Keep the screws in a safe place. If you are removing more than one component at

the same time, store the screws for the individual components separate from each

other. If you install the wrong screws, components may be damaged.

Slide the cover in the direction of the arrow (2), and lift it away from the notebook.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Removing a hard disk

►

Remove the screw (1).

Slide the hard disk in the direction of the arrow (2) until the contacts disengage.

Remove the hard disk (3) from the hard disk compartment.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Installing a hard disk

►

Place the hard disk into the hard disk compartment (1).

Slide the hard disk in the direction of the arrow (2). Ensure that the contacts engage.

Tighten the screw (3).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Removing and installing components during servicing

Attaching the cover

►

Place the cover in the correct mounting position (1).

Fasten the screws (2).

Replace the dust chamber cover (see "Removing and ﬁ tting the dust removal

cover (ventilation slot cover)", Page 62).

Finishing component removal

After you have removed or changed the system components as you required, please

prepare your device for operation again as follows:

►

Install the battery again (see "Installing a battery", Page 55).

Turn the notebook the right way up again and place it on a ﬂat surface.

Reconnect the cables that you disconnected before.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings in BIOS Setup Utility

BCSHyeIoaOstnrutdSﬁ

wgmSua

csrtaeoeutcntpitoﬁiUngngt,ﬁuiBslgirt,IauyBO

riIaSo

tnSiSo

nStueptuUtUilityility

The BIOS Setup Utility allows you to set the system functions and the hardware

conﬁguration for the notebook.

When it is delivered, the notebook is set to factory default settings. You can

change these settings in BIOS Setup Utility. Any changes you make take effect as

soon as you save and exit the BIOS Setup Utility.

The BIOS Setup Utility program contains the following menus:

About

Displays information relating to the BIOS, processor and notebook

Advanced system settings

System

Advanced

Conﬁguration of various hardware components, such as mouse, keyboard,

processor

Security

Boot

Password settings and security functions

Conﬁguration of the start-up sequence

Exits the BIOS Setup Utility

Exit

Starting the BIOS Setup Utility

►

Reboot the notebook (switch off/on or reboot the operating system).

BIOSSetupUtility

The following or a similar display appears on the screen at start-up:

ꢀ

<F2> BIOS Setup <F12> Boot Menu

►

Press the function key

If a password has been assigned, enter the password and press the Enter key.

If you have forgotten the password, contact your system administrator

or contact our customer service centre.

The BIOS Setup Utility starts.

Operating BIOS Setup Utility

BIOSSetupUtility

Press the

key to display help on the operation of BIOS Setup Utility. The description

of the individual settings is shown in the right-hand window of the BIOS Setup Utility.

With the

key you can load the default settings of the BIOS Setup Utility.

←

→

►

Use the cursor keys

to select the menu you wish to access to make changes.

The menu is displayed on the screen.

Select the option you want to change with the cursor keys

Press the Enter key.

ꢀ

↑

↓

►

ESC

Press the

key to exit the selected menu.

For future reference, make a note of the changes you have made (for example, in this manual).

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Settings in BIOS Setup Utility

Exiting BIOS Setup Utility

BIOSSetupUtility

You need to select the desired option in the Exit menu and activate it by pressing the Enter key:

Exit Saving Changes - save changes and exit BIOS Setup Utility

►

To save the current menu settings and exit the BIOS Setup Utility, select Exit Saving Changes and Yes.

The notebook is rebooted and the new settings come into effect.

ꢀ

Exit Discarding Changes – Discard changes and

exit BIOS Setup Utility

►

To discard the changes, select Exit Discarding Changes and Yes.

The settings in place when BIOS Setup Utility was called remain effective. BIOS

Setup Utility is terminated and the notebook is rebooted.

ꢀ

Load Setup Defaults – Copy Standard Entries

►

To copy the standard entries for all menus of the BIOS Setup Utility,

choose Load Setup Defaults and Yes.

Discard Changes – Discard changes without exiting

the BIOS Setup Utility

►

To discard the changes you have made, select Discard Changes and Yes.

The settings in place when BIOS Setup Utility was called remain effective.

You can now make additional settings in the BIOS Setup Utility.

ꢀ

►

If you want to exitBIOS Setup Utilitywith these settings, select Exit Saving Changes and Yes.

Save Changes - save changes without exiting

the BIOS Setup Utility

►

To save the changes, select Save Changes and Yes.

The changes are saved. You can now make additional settings in the BIOS Setup Utility.

If you want to exit BIOS Setup Utility with these settings, choose Exit Saving Changes and Yes.

ꢀ

►

Save Changes and Power Off

►

To save the changes and switch off your device, select Save Changes and Power Off and Yes.

The changes are saved. Your device is shut down.

ꢀ

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

FTiraoultbleshooting

Refer to the safety information in the "Safety" manual when

connecting or disconnecting cables.

If a fault occurs, try to correct it as described. If you fail to correct the problem, proceed as follows:

►

Make a note of the steps and the circumstances that led to the fault. Also

make a note of any error messages displayed.

►

Switch the notebook off.

Please contact the Hotline/Service Desk.

You can ﬁnd the telephone numbers in the service desk list. Please have

the following information ready when you call:

•

The model name and serial number of the notebook. The serial number is

located on a sticker on the underside of the notebook.

•

Notes of any messages that appear on the screen and information on acoustic signals.

Any changes you have made to the hardware or software since

receiving the notebook.

•

Any changes you have made to the BIOS Setup settings since receiving the notebook.

Your system conﬁguration and all peripheral devices connected to your system.

Your sales contract.

Our notebooks have been designed primarily with mobile applications in mind. This

means that considerable effort has been made to optimise components and equipment

in terms of weight, space and energy requirements. Depending on the particular

conﬁguration you have purchased, it is possible that functionality may be slightly reduced

compared to a desktop PC if you are running processor-intensive gaming software, e.g.

games with intensive 3D graphics. Updating your hardware with drivers which have not

been approved by Fujitsu Technology Solutions may result in performance losses, data

losses or malfunction of the equipment. A list of approved drivers and current BIOS

versions can be downloaded from: "http://ts.fujitsu.com/support/downloads.html"

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

Help if problems occur

Should you at any time have a problem with your computer that you can’t solve

yourself, in many cases you can quickly solve it by using the SystemDiagnostics

program which is pre-installed on your computer.

The SystemDiagnostics program is already installed on devices which were

delivered with a Windows operating system.

►

To start the SystemDiagnostics program, click on Startsymbol - Program - Fujitsu - SystemDiagnostics.

If a problem is found during a test run, the SystemDiagnostics program outputs

a code (e.g. DIFS-Code YXXX123456789123).

►

Make a note of the output DIFS code and the identity number of your device. The identity

number can be found on the type rating plate on the back of the casing.

For further clariﬁcation of the problem, contact the Service Desk for your country (see the Service

Desk list or visit the Internet at "http://ts.fujitsu.com/support/servicedesk.html"). When you do

this, please have ready the identity number and serial number of your system and the DIFS code.

Restoring the hard disk contents under Windows

HOapredrdaitsingsystem,restoring

You can reinstall the operating system with the "Windows Recovery CD" and

the "Drivers & Utilities" CD/DVD.

The instructions are provided on the case of the Recovery CD.

During the reinstall process your personal ﬁles and any installed programs

will be deleted. We advise you to backup your ﬁles to an external hard

drive, or CD / DVD disk before you start.

►

Switch the notebook on.

The following display brieﬂy appears on the screen during start-up:

<ESC>Diagnostic screen <F12>Boot Menu <F2>BIOS Setup

ꢀ

F12

►

When this message appears, press the function key

Insert the "Windows Recovery CD" into the optical drive.

Select CD-ROM and press the Enter key.

Follow the instructions on the screen.

After the installation you must install all the drivers again. Some installed hardware

components will not be correctly supported until this has been done.

►

Insert the "Drivers & Utilities" CD/DVD into the optical drive. The CD starts automatically.

Click on the Desk Update button.

Select Automatic driver installation (Express) and click on Start installation.

Follow the instructions on the screen.

Restart your notebook when the driver installation is completed.

100

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The notebook’s date or time is incorrect

STIDBniuamcfmto

i,nr

edboeiacnatrtyct

tiloimeagrrthrey

et,

scltoitamveings

Cause

Troubleshooting

Time and date are incorrect.

►

With the BIOS-Setup-Utility, you can set the

date and time in the main menu.

If the date and time are repeatedly incorrect when you switch on the notebook,

the built-in battery that supplies the internal clock has failed.

►

Please contact your sales outlet or our Hotline/Service Desk.

Battery indicator does not illuminate

Cause

Fault elimination

The battery is not installed correctly.

►

Switch the notebook off.

Check whether the battery is installed

correctly in its compartment.

►

Switch the notebook on.

Charge the battery.

The battery is fully discharged.

►

Install a charged battery.

Connect the notebook to a mains outlet

using the mains adapter.

When certain characters are entered on the

keyboard, only numerals are written

Abeepsoundseverysecond

Cause

Troubleshooting

Num

key.

The virtual numeric keypad of your device is

activated, see "Virtual numeric keypad", Page 44

►

Press the

The notebook’s LCD screen remains blank

LCDscreenistoodark

Cause

Troubleshooting

Monitor is switched off.

External monitor or television set connected.

►

Press a key or touch the touchpad.

Press the key combination to switch the

screen output, see "Key combinations",

Page 45.

Fujitsu Technology Solutions

101

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The LCD screen is difﬁcult to read

LCDscreen

Cause

Troubleshooting

Reﬂected glare

►

Turn the notebook or alter the tilt of the LCD

screen.

Increase the brightness of the screen.

The external monitor remains blank

Monitor

Cause

Troubleshooting

Monitor is switched off.

►

Switch the external monitor on.

Press any key to continue.

Power saving has been activated (monitor is

blank).

Brightness is set to dark.

►

Adjust the brightness of the monitor.

Screen output is set to the notebook’s LCD

screen

Press the key combination to switch the

screen output, see "Key combinations",

Page 45.

The external monitor’s power cable or data

cable is not connected properly.

►

Switch off the external monitor and the

notebook.

Check whether the power cable is plugged

properly into the external monitor and into

the power socket.

►

Check whether the data cable is properly

connected to the notebook and the external

monitor (if it is plugged in with a connector).

Switch on the external monitor and the

notebook.

The external monitor is blank or the image is unstable

tor

Cause

Troubleshooting

The wrong external monitor has been selected

or the wrong screen resolution has been set for

the application program.

►

Terminate the application program in

Alt F4

. If the

Windows by pressing

fault persists after closing the program, use

the key combination for switching the screen

output (see "Key combinations", Page 45) to

switch over to the notebook’s LCD screen.

Change the following setting:

►

Set the screen resolution: Set the screen

resolution as described in the documentation

for your operating system.

Select monitor: Select monitor 1 or 2 as

described in the documentation for your

operating system.

102

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The cursor does not correctly follow the

pen movements

Cause

Fault elimination

Windows XP

Pen incorrectly calibrated

►

Calibrate the pen as shown under Tablet

and Pen Settings in the Control Panel, see

"Setting the pen", Page 39 and "Calibrating

the pen", Page 39.

Windows Vista

►

Calibrate the pen as shown under Tablet PC

Settings in the Control Panel, see "Setting

the pen", Page 39 and "Calibrating the pen",

Page 39.

Windows 7

►

Calibrate the pen as shown under Hardware

and Sound / Tablet PC Settings in the Control

Panel, see "Setting the pen", Page 39 and

"Calibrating the pen", Page 39.

The notebook cannot be started

Notebook

Cause

Troubleshooting

The battery is not installed correctly.

►

Check whether the battery is installed

correctly in its compartment.

►

Switch the notebook on.

Charge the battery.

The battery is dead.

►

Insert a charged battery.

Connect the mains adapter to the

notebook.

The power adapter is not connected correctly.

►

Check whether the mains adapter is

connected correctly to the notebook.

Switch the notebook on.

Fujitsu Technology Solutions

103

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The notebook stops working

NEnoetergbyosoakvingmode

Cause

Troubleshooting

Notebook is in energy saving mode.

►

Leave energy saving mode.

An application programme has caused the

malfunction.

Close the application program or restart

the notebook (by restarting the operating

system or switching the device off and back

on again).

The battery is dead.

►

Charge the battery.

►

Insert a charged battery.

Connect the mains adapter to the

notebook.

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched

on and ready for operation (refer to the

documentation supplied with the printer).

The printer is not connected correctly.

Check that the data cable connecting

the notebook to the printer is properly

connected.

The printer driver is faulty or not correctly

installed, or it is the wrong printer driver.

Check that the data cable connecting

the notebook to the printer is properly

connected.

Check whether the correct printer driver is

loaded (refer to the printer documentation).

The radio connection to a network does not work

Theradioconnectiontoanetworkdoesnotwork

Cause

Troubleshooting

The wireless component is disabled.

►

Switch the radio component on (see

"Switching the wireless components on and

off", Page 69).

The wireless component is enabled. Despite

this, the wireless connection to a network does

not work.

►

Check whether the radio connection is

switched on via the software.

Further information on using the radio

component can be found in the help ﬁles.

104

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

The battery discharges too quickly

Battery:

Cause

Troubleshooting

The battery is either too hot or too cold. In this

case the battery indicator ﬂashes.

►

Bring the notebook up/down to a normal

temperature again.

If the operating time of the battery life is

extremely short, the battery is probably too

old. Replace battery if necessary.

You may have an application running that

consumes a great deal of power due to frequent

accessing of the hard disk or optical drive.

►

Use the mains adapter as frequently as

possible.

The maximum brightness may have been set

for the screen.

Set the screen slightly darker with the

key combination for Decreasing the screen

brightness in order to reduce the amount of

power being drawn.

Acoustic warnings

AEcrrooursticerrormessages

Cause

Troubleshooting

Charge the battery.

A beep sounds every few seconds

►

The battery is almost ﬂat.

Error messages on the screen

Errormessages: onthescreen

This section describes the error messages generated by the BIOS Setup. Error messages displayed

by the operating system or programmes are described in the relevant documentation.

If the error message appears repeatedly, despite troubleshooting measures, please

contact the place of purchase or our customer service centre.

Error message/cause

Resolution

CMOS battery bad

►

Contact your sales outlet or our customer

service centre.

If the error message occurs repeatedly, the

buffer battery in the notebook is ﬂat.

System CMOS checksum bad - default conﬁguration

used

►

Switch the notebook off.

Switch the notebook on.

The system conﬁguration information is

Press the function key

to access the

incorrect.

BIOS Setup.

►

In the BIO Setup, select the Exit menu.

Select the entry Load Setup Defaults.

Select OK and press the Enter key.

Fujitsu Technology Solutions

105

Download from Www.Somanuals.com. All Manuals Search And Download.

Troubleshooting and tips

Error message/cause

Resolution

Extended memory failed at offset: xxxx Failing Bits:

zzzz zzzz

►

Check whether the additional memory

module has been inserted correctly.

When testing the extended memory an error has

resulted at the address xxxx.

Failure Fixed Disk n

►

Start the BIOS Setup (Primary Master

submenu) and select the correct settings.

The settings of the hard disk drive are incorrect.

Keyboard controller error

►

Switch the notebook off with the ON/OFF

switch.

Wait 3 - 5 seconds and switch on the

notebook again.

Keyboard error

If you are using an external keyboard:

►

Check the connection and reboot the

notebook.

nn Stuck key

►

Make sure that no key is pressed.

Operating system not found

Check in the BIOS Setup whether your hard

disk has been set correctly.

►

Make sure that the operating system is

installed on the corresponding drive.

Press <F1> to resume, <F2> to SETUP

Press the

function key to start the

operating system.

This error message appears if an error occurs

during the self-test before starting the operating

system.

Press the function key

to access the

BIOS Setup.

function key when prompted

Previous boot incomplete - Default conﬁguration

used Due to an error during the previous system

boot, default values were used for certain

settings. Check the settings in the BIOS Setup.

►

Press the

to do so.

Real time clock error

►

Contact your sales outlet or our customer

service centre.

nnnnK Shadow RAM failed at offset: xxxx Failing

Bits: zzzz

Contact your sales outlet or our customer

service centre.

System battery is dead - Replace and run SETUP

System cache error - Cache disabled

System timer error

Contact your sales outlet or our customer

service centre.

Contact your sales outlet or our customer

service centre.

Contact your sales outlet or our customer

service centre.

106

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Notebook

General

Processor

Intel Core 2 Duo processor, Celeron

Main memory (SO DIMM)

Maximum 8 GB DDR3

2 slots for 1 GByte, 2 GByte or 4 GByte modules

Electrical data

Safety regulations complied with

Protection class

CE, CE!

Maximum power consumption (when the

notebook is switched on and the battery is

charged):

80 W

100 W while a port replicator is being used

LCD screen

Size

30.73 cm TFT WXGA

Resolution

1280 x 800 / 32 Bit, Touch panel, LED Backlight,

Anti Glare (matt screen surface)

Pixel class

Brightness control

Digitizer

8 levels

Dual Digitizer

Graphics card

Chip

GMA 4500MHD

Recommended screen resolution of the external 1280 x 1024 (maximum 1920 x 1200) /

CRT monitor (53.34 cm):

16.7 million colours at 85 Hz

Dimensions

Width x depth x height

Weight depending on conﬁguration

Input devices

Keyboard

297 mm x 233 mm x 36.4 mm

from 1.99 kg

85 keys

Touchpad

2 keys

Tablet buttons

Pen

5 keys

1 rocker button/eraser

Slots

ExpressCard slot

Memory card slot

SIM card slot (optional)

Ports

1 x ExpressCard/34 or ExpressCard/54

1 x SD or MS card

1 x

Monitor port (analogue)

HDMI port

15-pin female connector

19-pin socket

LAN port

Socket, RJ45

Fujitsu Technology Solutions

107

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Microphone port/Line In

Headphones port/Line Out

FireWire port

3.5 mm stereo mini jack

S400, 4-pin

Docking port

80-pin

USB (Universal Serial Bus)

Kensington Lock

3 x USB 2.0

1 x

Ambient conditions

Environment class DIN IEC 721

Mechanism class DIN IEC 721

Operating temperature

Transport temperature (2K2)

7K1

7M2

5 °C .... 35 ℃

–15 °C .... 60 ℃

Port Replicator (optional)

Electrical data

Safety regulations complied with

Protection class

Ports

Monitor port (analogue)

Monitor port (digital)

LAN port

15-pin

25-pin, DVI-D

RJ45

USB (Universal Serial Bus)

Audio

4x USB 2.0

Line out

80-pin

Docking port

Ambient conditions

Environment class DIN IEC 721

Mechanism class DIN IEC 721

Operating temperature

Transport temperature

7K1

7M2

5 °C .... 35 °C

–15 °C .... 60 ℃

108

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Technical data

Rechargeable battery

You can ﬁnd information on the batteries used in your device on the

Internet at "http://ts.fujitsu.com/support".

You can use different batteries. When ordering your device you can select between

main battery 1 and main battery 2. In addition, you can order the optional

battery for installation in the module compartment.

All batteries are 6-cell batteries.

Optional battery

(ﬁtting in the module

Main battery 1

10.8 V

Main battery 2

10.8 V

bay)

Rated voltage

Rated capacity

Nominal power

10.8 V

62.6 Wh

56.2 Wh

41 Wh

5.800 mAh

5,200 mAh

3,800 mAh

The operating time depends on the device conﬁguration, the active

applications and the energy saving settings.

Mains adapter

Primary

Rated voltage

Rated frequency

Max. rated current

Secondary

100 V to 240 V (automatic)

50 Hz to 60 Hz (automatic)

0.7 – 1.2 A

Nominal power

•

without port replicator: 80 W

with port replicator: 100 W

Rated voltage

19 V

Max. rated current

•

without port replicator: 4.22 A

with port replicator: 5.3 A

An additional mains adapter or power cable can be ordered at any time.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

109

Manufacturer’s notes

Energy Star

Devices which are certiﬁed according to the Energy Star environmental

mark help to save money and reduce the emission of greenhouse gases.

Power Management settings on delivery:

•

Monitor switched off after < 15 minutes of inactivity

Automatic activation of energy saving mode (ACPI S3): < 30 minutes

of inactivity

Detailed information about the requirements of the "Energy Star"

environmental mark and the products which satisfy these requirements

can be found on the Internet at "https://www.energystar.gov/".

Disposal and recycling

Notes

Information about this subject can be found on your notebook or on our Internet pages.

Declarations of Conformity

Declarationofconformity

The "Declarations of Conformity" concerning the device can be found at our

Internet address: "http://ts.fujitsu.com".

Fujitsu Technology Solutions hereby declares that your device is in compliance with the

essential requirements and other relevant provisions of Directive 1999/5/EC.

Tested safety (GS, valid only for LIFEBOOK T4410)

The device satisﬁes the requirements for the following directives:

•

EN60950-1:2006

DIN EN ISO 9241-307:2009

DIN EN ISO 9241-4:1999

DIN EN ISO 9241-9:2002

EK1-ITB 2000:2009

ZEK 01.2-08:2008

110

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

CE marking

CEmarking

CE marking for devices with radio component

This equipment complies with the requirements of Directive 1999/5/EC of the

European Parliament and Commission from 9 March, 1999 governing Radio

and Telecommunications Equipment and mutual recognition of conformity.

This equipment can be used in the following countries:

Belgium

Estonia

Bulgaria

Finland

Denmark

France

Germany

Greece

Italy

Ireland

Iceland

Latvia

Malta

Liechtenstein

Lithuania

Norway

Luxembourg

Austria

The

Netherlands

Poland

Portugal

Slovakia

Hungary

Rumania

Slovenia

Cyprus

Sweden

Spain

Switzerland

Czech Republic

Contact the corresponding government ofﬁce in the respective country for

current information on possible operating restrictions. If your country is

not included in the list, then please contact the corresponding supervisory

authority as to whether the use of this product is permitted in your country.

Regulatory notices

If there is no FCC logo and also no FCC ID on the device then this device is

not approved by the Federal Communications Commission (FCC) of the USA.

Although it is not explicitly forbidden to travel in the US trading area carrying this

device, to avoid trouble at customs clearance, Fujitsu Technology Solutions GmbH

recommends not to bring this device into the US trading area.

Regulatory information for notebooks without radio device

Regulatoryinformation

NOTICE:

Changes or modiﬁcations not expressly approved by Fujitsu Technology Solutions

could void this user’s authority to operate the equipment.

Notice to Users of Radios and Television

These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

111

Manufacturer’s notes

•

Connect the equipment into an outlet that is on a different circuit than the receiver.

Consult the dealer or an experienced radio/TV technician for help.

Notice to Users of the US Telephone Network

Your notebook may be supplied with an internal modem which complies with Part 68 of the

FCC rules. On this notebook is a label that contains the FCC Registration Number and the

Ringer Equivalence Number (REN) for this equipment among other information. If requested,

the user must provide their telephone company with the following information:

1. The telephone number to which the notebook is connected.

2. The Ringer Equivalence Number (REN) for this equipment.

3. The equipment requires a standard modular jack type USOC RJ-11C

which is FCC Part 68 compliant.

4. The FCC Registration Number.

This equipment is designed to be connected to the telephone network or premises wiring using

a standard modular jack type USOC RJ-11C which is FCC Part 68 compliant and a line cord

between the modem and the telephone network with a minimum of 26AWG.

The REN is used to determine the number of devices that you may connect to your telephone

line and still have all of those devices ring when your number is called. Too many devices

on one line may result in failure to ring in response to an incoming call. In most, but not all,

areas the sum of the RENs of all of the devices should not exceed ﬁve (5). To be certain

of the number of devices you may connect to your line, as determined by the RENs, contact

your local telephone company. If this equipment causes harm to the telephone network, your

telephone company may discontinue your service temporarily. If possible, they will notify you

in advance. If advance notice is not practical they will notify you as soon as possible. You

will also be advised of your right to ﬁle a complaint with the FCC.

This fax modem also complies with fax branding requirements per FCC Part 68.

Your telephone company will probably ask you to disconnect this equipment from the telephone

network until the problem is corrected and you are sure that the equipment is not malfunctioning.

This equipment may not be used on coin-operated telephones provided by your telephone

company. Connection to party lines is subject to state tariffs. Contact your state’s public utility

commission, public service commission or corporation commission for more information.

This equipment includes automatic dialing capability. When programming and/or

making test calls to emergency numbers:

•

Remain on the line and brieﬂy explain to the dispatcher the reason for the call.

Perform such activities in off-peak hours, such as early morning or late evening.

FCC rules prohibit the use of non-hearing aid compatible telephones in the

following locations or applications:

•

All public or semi-public coin-operated or credit card telephones.

Elevators, highways, tunnels (automobile, subway, railroad or pedestrian) where a

person with impaired hearing might be isolated in an emergency.

•

Places where telephones are speciﬁcally installed to alert emergency authorities

such as ﬁre, police or medical assistance personnel.

•

Hospital rooms, residential health care facilities, convalescent homes and prisons.

Hotel, motel or apartment lobbies.

Stores where telephones are used by patrons to order merchandise.

112

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

•

Public transportation terminals where telephones are used to call taxis or

to reserve lodging or rental cars.

In hotel and motel rooms as at least ten percent of the rooms must contain hearing

aid-compatible telephones or jacks for plug-in hearing aid compatible telephones which

will be provided to hearing impaired customers on request.

DOC (Industry CANADA) notices

DOC(INDUSTRYCANADA)NOTICES

Notice to Users of Radios and Television

This Class B digital apparatus meets all requirements of Canadian Interference-Causing Equipment

Regulations.

CET appareil numérique de la class B respecte toutes les exigence du Réglement

sur le matérial brouilleur du Canada.

Notice to Users of the Canadian Telephone Network

NOTICE:

This equipment meets the applicable Industry Canada Terminal Equipment Technical

Speciﬁcations. This is conﬁrmed by the registration number. The abbreviation, IC, before

the registration number signiﬁes that registration was performed based on a Declaration of

Conformity indicating that Industry Canada technical speciﬁcations were met. It does not

imply that Industry Canada approved the equipment. Before connecting this equipment to

a telephone line the user should ensure that it is permissible to connect this equipment to

the local telecommunication facilities. The user should be aware that compliance with the

certiﬁcation standards does not prevent service degradation in some situations.

Repairs to telecommunication equipment should be made by a Canadian authorised

maintenance facility. Any repairs or alterations not expressly approved by Fujitsu or

any equipment failures may give the telecommunication company cause to request the

user to disconnect the equipment from the telephone line.

NOTICE:

The Ringer Equivalence Number (REN) for this terminal equipment is 0.0. The REN assigned

to each terminal equipment provides an indication of the maximum number of terminals

allowed to be connected to a telephone interface. The termination on an interface may

consist of any combination of devices subject only to the requirement that the sum of the

Ringer Equivalence Numbers of all the devices does not exceed ﬁve.

CAUTION:

For safety, users should ensure that the electrical ground of the power utility, the

telephone lines and the metallic water pipes are connected together. Users should NOT

attempt to make such connections themselves but should contact the appropriate electric

inspection authority or electrician. This may be particularly important in rural areas.

Avis Aux Utilisateurs Du Réseau Téléphonique Canadien

AVIS : Le présent matériel est conforme aux spéciﬁcations techniques d’Industrie Canada

applicables au matériel terminal. Cette conformité est conﬁrmée par le numéro d’enregistrement.

Le sigle IC, placé devant le numéro d’enregistrement, signiﬁe que l’enregistrement s’est effectué

conformément à une déclaration de conformité et indique que les spéciﬁcations techniques

d’Industrie Canada ont été respectées. Il n’implique pas qu’Industrie Canada a approuvé le matériel.

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

113

Manufacturer’s notes

Avant de connecter cet équipement à une ligne téléphonique, l’utilisateur doit vériﬁer

s’il est permis de connecter cet équipement aux installations de télécommunications

locales. L’utilisateur est averti que même la conformité aux normes de certiﬁcation ne

peut dans certains cas empêcher la dégradation du service.

Les réparations de l’équipement de télécommunications doivent être effectuées par un service de

maintenance agréé au Canada. Toute réparation ou modiﬁcation, qui n’est pas expressément

approuvée par Fujitsu, ou toute défaillance de l’équipement peut entraîner la compagnie de

télécommunications à exiger que l’utilisateur déconnecte l’équipement de la ligne téléphonique.

AVIS : L’indice d’équivalence de la sonnerie (IES) du présent matériel est de 0.0. L’IES

assigné à chaque dispositif terminal indique le nombre maximal de terminaux qui peuvent

être raccordés à une interface téléphonique. La terminaison d’une interface peut consister

en une combinaison quelconque de dispositifs, à la seule condition que la somme d’indices

d’équivalence de la sonnerie de tous les dispositifs n’excède pas 5.

AVERTISSEMENT:

Pour assurer la sécurité, les utilisateurs doivent vériﬁer que la prise de terre du service

d’électricité, les lignes télphoniques et les conduites d’eau métalliques sont connectées

ensemble. Les utilisateurs NE doivent PAS tenter d’établir ces connexions eux-mêmes,

mais doivent contacter les services d’inspection d’installations électriques appropriés

ou un électricien. Ceci peut être particulièrement important en régions rurales.

UL Notice

This unit requires an AC adapter to operate. Only use a UL Listed Class 2 adapter.

The correct output rating is indicated on the AC adapter label. Refer to the illustration

below for the correct AC Adapter output polarity:

CAUTION:

To reduce the risk of ﬁre, use only 26AWG or larger telecommunications line cord.

For Authorized Repair Technicians Only

CAUTION:

For continued protection against risk of ﬁre, replace only with the

same type and rating fuse.

WARNING:

Danger of explosion if Lithium (CMOS) battery is incorrectly replaced. Replace only

with the same or equivalent type recommended by the manufacturer.

Dispose of used batteries according to the manufacturer’s instructions.

114

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

FCC Regulatory information for notebooks with radio device

Regulatoryinformation

Federal Communications Commission statement

This device complies with Part 15 of FCC Rules. Operation is subject to the following

two conditions: (1) this device may not cause interference, and

(2) this device must accept any interference, including interference that may

cause undesired operation of this device.

FCC Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential installation. This equipment generates,

uses, and can radiate radio frequency energy. If not installed and used in accordance with

the instructions, it may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the distance between the equipment and the receiver.

3. Connect the equipment to an outlet on a circuit different from the one the receiver is connected to.

4. Consult the dealer or an experienced radio/TV technician for help.

Please note the following regulatory information related to the optional radio device.

FCC Radio Frequency Exposure statement

This radio device has been evaluated under FCC Bulletin OET 65C and found compliant with the

requirements as set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF

Exposure from radio frequency devices. The radiated output power of this radio device is far below

the FCC radio frequency exposure limits. Nevertheless, this device shall be used in such a manner

that the potential for human contact during normal operation is minimized. When using this device, a

certain separation distance between antenna and nearby persons must be maintained to ensure RF

exposure compliance. In order to comply with RF exposure limits established in the ANSI C95.1

standards, the distance between the antennas and the user should not be less than 20 cm (8 inches).

Regulatory Notes and Statements

Radio device, health and authorisation for use

Radio-frequency electromagnetic energy is emitted from the wireless devices. The energy levels

of these emissions, however, are far much less than the electromagnetic energy emissions from

wireless devices such as mobile phones. Radio devices are safe for use by consumers because

they operate within the guidelines found in radio frequency safety standards and recommendations.

The use of the radio devices may be restricted in some situations or environments, such as:

•

on board an airplane, or

in an explosive environment, or

in situations where the interference risk to other devices or services is

perceived or identiﬁed as harmful.

In cases in which the policy regarding use of radio devices in speciﬁc environments is not

clear (e.g., airports, hospitals, chemical/oil/gas industrial plants, private buildings), obtain

authorization to use these devices prior to operating the equipment.

Fujitsu Technology Solutions

115

Download from Www.Somanuals.com. All Manuals Search And Download.

Manufacturer’s notes

Regulatory Information/Disclaimers

Installation and use of this radio device must be in strict accordance with the instructions included

in the user documentation provided with the product. Any changes or modiﬁcations made to this

device that are not expressly approved by the manufacturer may void the user’s authority to operate

the equipment. The manufacturer is not responsible for any radio or television interference caused

by unauthorized modiﬁcation of this device, or the substitution or attachment of connecting cables

and equipment other than those speciﬁed by the manufacturer. It is the responsibility of the user

to correct any interference caused by such unauthorized modiﬁcation, substitution or attachment.

The manufacturer and its authorized resellers or distributors will assume no liability for any damage

or violation of government regulations arising from failure to comply with these guidelines.

Export restrictions

This product or software contains encryption code which may not be exported or

transferred from the US or Canada without an approved US Department of Commerce

export license. This device complies with Part 15 of FCC Rules, as well as ICES 003 B

/ NMB 003 B. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference

that may cause undesirable operation.

Modiﬁcations not expressly authorised by Fujitsu Technology Solutions may

invalidate the user’s right to operate this equipment.

116

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

A beep sounds every second 95

Acoustic error messages 99

Anti-theft protection 71

Audio devices, connecting 81

Audio ports 81–82

Date is incorrect 95

Declaration of conformity 104

DOC (INDUSTRY CANADA) NOTICES 107

Drive

Backspace 37

Bass loudspeaker (subwoofer) 61

Battery

battery life 46

Removing 52

caring for and maintaining 47

charge level 47, 57

charging 47

self-discharge 47

storage 47

Emergency removal of data carrier 55

Energy

Battery status meter 47

Battery:

energy saving

Energy saving

discharges too quickly 99

protecting with password 72

settings 91

Error message:

on the screen 99

Error messages on the screen 99

Errors

Bluetooth

Switching off module 63

Switching on module 63

Board 83

Buffer battery, load 95

manual emergency removal 55

CE marking 105

Charging capacity, battery 47

Cleaning 10

correction 93

Fingerprint sensor 71

con ﬁ gure 71

FireWire

connecting devices 81

installing / removing 83

Con ﬁ guration, BIOS Setup Utility 91

Connecting audio devices 81–8 2

Connecting headphones 82

Crystal View display

cleaning 10

Getting started 11

Cursor control keys 38

Cursor keys 38

Fujitsu Technology Solutions

117

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

restoring the contents 94

Microphone 61

Hardware con ﬁ guration 91

Microphone, connecting 81

Incorrect date/time 95

see VGA connection socket 78

Kensington MicroSaver 71

Landscape orientation

Language selection 26

Notebook, operation 14

dif ﬁ cult to read 96

notes 28

Notebook: switching on 17

Notes

re ﬂ ected glare 96

remains blank 95

LCD screen is too dark 95

disposal / recycling 104

see Virtual numeric keypad 38

connecting 12

setting up 12

Manual removal of data carrier 55

Mechanical backup 71

Memory card

Operating system

activating system protection 73

cancel system protection 73

protecting with password 73

Operating system language 26

Operating system, restoring 94

118

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Password protection 72

Connecting a notebook 67

Ports 65

Portrait orientation

screen 22

Suspend/Resume button 17

Switching on for the ﬁ rst time 13

Symbols

indicators 14

Ports

System con ﬁ guration 91

System expansion 84

see Adding memory 84

System settings, BIOS Setup Utility 91

Port Replicator 65

Power

power consumption 57

power-management features 57

Power-on indicator 17

Preparing for operation 12

Printer does not print 98

T a b key 37

The radio connection to a network does

not work 98

Time not correct 95

Time, daylight savings 95

Tips 93

Rechargeable battery 46

see Battery 46

Regulatory information

notebooks with radio device 109

Notebooks without radio device 105

Removing

T o ggle output screen 40

executing commands 35

moving the pointer 35

Trusted Platform Module 75

see VGA connection socket 78

Security functions 70

Select the language: for handwriting recognition

and keyboard 27

Select the language: for menu texts 26

Selecting a location 12

Self-discharge, battery 47

Using a Kensington Lock 71

Setup

see BIOS Setup Utility 91

Shift 37

Fujitsu Technology Solutions

119

Download from Www.Somanuals.com. All Manuals Search And Download.

Index

Weight Saver

Removing 52

Wireless LAN

Switching off module 63

Switching on module 63

VGA connection socket 78

Video devices, connecting 81

Virtual numeric keypad 38

Volume control 61

Webcam 46

120

Fujitsu Technology Solutions

Download from Www.Somanuals.com. All Manuals Search And Download.

Earthquake Sound Stereo Amplifier XJ 600R User Manual
Euro Pro Blower EP366 User Manual
EverFocus Security Camera ED200 User Manual
Excalibur electronic Fan FN10 BB User Manual
Exmark Lawn Mower 4500 507 User Manual
Fisher Price Motorized Toy Car V3710 User Manual
Fluke TV Converter Box 80TK User Manual
Freestyle Watch 527 User Manual
GBC Binding Machine CC2700 User Manual
Gianni Industries Door LZ 400N User Manual