Fujitsu LifeBook
T Series
BIOS Guide
LifeBook T Series Model:
T4010/T4010D
Document Date: 10/01/2004
Document Part Number: FPC58-1296-01
F U J I T S U C O M P U T E R S Y S T E M S
1
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
■
If your tablet emits a series of beeps that
sounds like a code and the display is
blank, please refer to the Troubleshoot-
ing section of your system Use’s Guide.
The Troubleshooting Section includes a
list of error messages and their mean-
ings.
■
If your data security settings require it,
you may be asked for a password before
the operating system will be opened.
3. If an error message is displayed on the screen, and
you want to enter the setup utility, press the [F2] key.
4. When the setup utility starts with a fault present, the
system displays the following message:
Warning!
Error message
[Continue]
5. Press any key to enter the setup utility. The system
will then display the Main Menu with current
parameters values.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS
The Main Menu allows you to set or view the current
system parameters. (See Navigating through the Setup
Utility on page 2 for more information)
System Time and System Date can also be
set from your operating system without
using the setup utility. Use the calendar
and time icon on your Windows Control
panel or type time or date from the MS-
DOS prompt.
The following tables show the names of the menu fields
for the Main menu and its submenus, all of the options
for each field, the default settings and a description of
the field’s function and any special information needed
to help understand the field’s use. Note that the actual
drive labels shown may vary.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
System Time:
System Date:
[02:34:56]
[10/03/2004]
Adjust calendar clock.
Primary Master
[FUJITSU MHT2040AT-(PM)]
Secondary Master
[TOSHIBA DVD-ROM SD-R2512-(SM)]
<Tab>, <Shift-Tab>, or
<Enter> selects field.
Language:
[English (US)]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 1. Main Menu
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
System Time:
–—
–—
Sets and displays the current time. Time is in a 24 hour format
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).
Example: 16:45:57. You may change each segment of the time
separately. Move between the segments with the [Tab] key and/or
[Shift] + [Tab] keys.
System Date:
–—
–—
Sets and displays the current date. Date is in a month/day/year
numeric format with 2 digits each for month and day and 4 digits
for year. (MM/DD/YYYY) for example: 03/20/1998. You may
change each segment of the date separately. Move between the
segments with the [Tab] key and/or [Shift] + [Tab] keys.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Table 1: Fields, Options and Defaults for the Main Menu
Menu Field
Options
Default
Description
Primary
Master:
The product # of
the Hard Drive
Display the type of device on this ATA/ATAPI interface, if there is
one. Pressing the Enter key selects the Primary Master submenu
allowing additional device configuration options for this interface.
Selects Primary
Master submenu
Secondary
Master:
The product # of
the Optical Drive
Display the type of device on this interface, if there is one. Pressing
the Enter key selects the Secondary Master submenu allowing
additional device configuration options for this interface.
Selects Secondary
Master submenu
■
Language:
English (US)
Japanese (JP)
[English (US)]
The default setting differs between the US/European and the
Japanese model. Selects the display language for the BIOS.
■
5
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Primary Master Submenu of the Main Menu
The Primary Master submenu identifies what ATA
devices are installed.
Note that actual hard drive label shown may vary.
Depending on the drive type, information such as cylin-
ders, heads and sectors may also be displayed.
PhoenixBIOS Setup Utility
Main
Primary Master [FUJITSU MHT2040AT-(PM)]
Item Specific Help
Type:
[Auto]
LBA Format
78140160
40008MB
Select ATA/ATAPI drive
installed here.
Total Sectors:
Maximum Capacity:
[Auto]
The BIOS auto-types the
drive on boot time.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[16 Sectors]
[Enabled]
[Multiword DMA 2]
[Disabled]
Except [Auto]
You enter parameters of
the drive.
Ultra DMA Mode:
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 2. Primary Master Submenu
Menu Field
Options
Default
Description
■
■
■
■
Type:
Auto
None
CD-ROM
Hard Disk
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Set-up items do not appear. Select CD-ROM if a
CD-ROM drive is installed at this connection. If Hard Disk is
selected, you must specify the number of Cylinders, Heads, and Sec-
tors for the drive.
LBA Format
Logical Block Addressing (LBA)
Total Sectors:
---
---
The total number of sectors on your hard disk
---
---
Maximum
Capacity:
The maximum capacity of your hard disk
CHS Format
Cylinders/Heads/Sectors
■
Cylinders:
A number between
0 and 65,535
–—
This item is active only when Hard Disk is selected as the type. This
field is changed by incrementing (pressing the [Spacebar]) or by typ-
ing in the number.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Menu Field
Options
Default
Description
■
Heads:
A number between
1 and 16
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
■
■
Sectors:
A number between
0 and 63
–—
This item is active only when Hard Disk is selected as type. You can
change the value by incrementing (pressing the [Spacebar]) or by
typing in the number.
Maximum
Capacity:
Display only
–—
Displays the maximum capacity of the drive calculated from the
parameters of the hard disk when Auto is selected and the type
is identified as hard disk.
■
■
■
■
■
Multi-Sector
Transfers:
Disabled
2 Sectors
4 Sectors
8 Sectors
16 Sectors
[16 Sectors]
This option cannot be changed when Auto is selected. Specify the
number of sectors per block for multiple sector transfer.
■
■
LBA Mode Control:
Transfer Mode:
Disabled
Enabled
[Enabled]
Enables or disables logical Block Addressing in place of Cylinder,
Head, Sector addressing. This option cannot be changed when Auto
is selected.
■
■
■
■
■
■
■
Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
Multiword DMA 1
Multiword DMA 2
[Multiword
DMA 2]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
■
■
■
■
■
■
■
Ultra DMA Mode:
Disabled
Mode 0
Mode 1
Mode 2
Mode 3
Mode 4
Mode 5
[Disabled]
Selects the method for moving data to/from the drive. Autotype the
drive to select the optimum transfer mode. This option cannot be
changed when Auto is selected.
■
A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is
used, the drive allocations change automatically without changing the BIOS setup. If a floppy disk format
CD-ROM is used, the CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive for-
mat) if the internal hard drive is not present or is disabled. The bootable CD-ROM can never use a C: des-
ignation if a formatted internal hard drive is present since the C: designator is always reserved for the
internal hard drive.The boot sequence ignores the new drive designations, however, your application soft-
ware will use the new designations.
■
Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by
mistake.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Secondary Master Submenu of the Main Menu
The Secondary Master submenu is for the internal CD-ROM drive. The drive type is displayed on this menu as well as
the Main menu. Your notebook auto-senses the characteristics of the internal CD-ROM Drive installed. You will not
need to modify these settings; they are displayed for your reference. Note that actual drive labels shown may vary.
PhoenixBIOS Setup Utility
Main
Secondary Master [TOSHIBA DVD-ROM SD-R2512-(SM)]
Item Specific Help
Type:
[Auto]
Select ATA/ATAPI drive
installed here.
Multi-Sector Transfers:
LBA Mode Control:
Transfer Mode:
[Disabled]
[Disabled]
[Standard]
[Disabled]
[Auto]
The BIOS auto-types the
drive on boot time.
Ultra DMA Mode:
Except [Auto]
You enter parameters of
the drive.
[None]
The drive is disabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 3. Secondary Master Submenu
Menu Field
Options
Default
Description
Type:
• Auto
• None
• CD-ROM
• Hard Disk
[Auto]
Selects the ATA/ATAPI device type. Select Auto to have the
type automatically identified by the BIOS at POST. If None is
selected, all of the following Set-up items do not appear.
Select CD-ROM or Hard Disk for appropriate drive type
installed at this connection.
Multi-Sector
Transfers:
• Disabled
• 2 Sectors
• 4 Sectors
• 8 Sectors
• 16 Sectors
[Disabled]
[Disabled]
This option cannot be changed when Auto is selected. Spec-
ify the number of sectors per block for multiple sector trans-
fer.
LBA Mode
Control:
• Disabled
• Enabled
Enables or disables Logical Block Addressing in place of Cyl-
inder, Head, Sector addressing. This option cannot be
changed when Auto is selected.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
M a i n M e n u
Menu Field
Options
Default
Description
Transfer Mode:
• Standard
• Fast PIO 1
• Fast PIO 2
[Standard]
Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.
• Fast PIO 3
• Fast PIO 4
• Multiword DMA 1
• Multiword DMA 2
Ultra DMA
Mode:
• Disabled
• Mode 0
• Mode 1
• Mode 2
• Mode 3
• Mode 4
• Mode 5
[Disabled]
Selects the method for moving data to/from the drive.
Autotype the drive to select the optimum transfer mode.
This option cannot be changed when Auto is selected.
Exiting from Main Menu
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit
menu or to move to another menu.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS
The Advanced Menu allows you to:
Follow the instructions for Navigating Through the
Setup Utility to make any changes.
■
Set the I/O addresses for the infrared ports.
Set the features of the keyboard/mouse.
Select between the display panel and/or an external
■
(See Navigating through the Setup Utility on page 2 for
more information)
■
CRT display.
Set internal device configurations
Configure USB features.
Configure miscellaneous features such as Wake Up On
■
The following tables show the names of the menu fields
for the Advanced Menu and its submenus, all of the
options for each field, the default settings and a descrip-
tion of the field’s function, and any special information
needed to help understand the field’s use.
■
■
LAN.
■
Configure DMI Event Logging.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
IrDA Port Configurations
Keyboard/Mouse Features
Video Features
Configures IrDA ports.
Internal Device Configurations
CPU Features
USB Features
Miscellaneous Configurations
Event Logging
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 4. Advanced Menu
10
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 4: Fields, Options and Defaults for the Advanced Menu
Menu Field
Description
IrDA Port Configurations
When selected, opens the IrDA Port Configurations submenu which allows the user to modify settings for
infrared ports.
Keyboard/Mouse
Features
When selected, opens the Keyboard/Mouse Features submenu, which allows setting external and internal
keyboard and mouse parameters.
Video Features
When selected, opens the Video Features submenu, which allows setting of the display parameters,
including routing of video signals to different displays.
Internal Device
Configurations
When selected, opens the Internal Device Configuration submenu, which allows enabling or disabling the
IDE LAN, and modem controllers.
CPU Features
USB Features
When selected, opens the CPU Features submenu, which allows the user to modify the Intel(R) Speed-
Step(R) features.
Configures USB features.
Miscellaneous
Configurations
Configures miscellaneous features, such as Wake Up On LAN and Power Button.
Event Logging
When selected, opens the event logging submenu.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
IrDA Port Configuration Submenu of the Advanced Menu
The IrDA Port Configuration submenu provides the
ability to set the I/O addresses and interrupt levels for
I/O addresses, DMA channels, and
Interrupt levels can be entered in various
ways, including via the BIOS setup utility,
the control software for the I/O device, or
the hardware. If any two ports or devices
have the same I/O address assigned your
tablet will not function normally. Please
keep a record of original settings before
making any changes in the event that a
restoration is required. See your hardware
and software documentation as well as the
setup utility to determine settings,
the infrared ports of your tablet.
■
To prevent IRQ and address conflicts,
avoid changing the default settings. If
you must change the settings, you can
call 1-800-8Fujitsu for technical assis-
tance.
■
The BIOS will warn you of resource con-
flicts by placing a yellow asterisk next to
each device that is in conflict.
limitations, etc.
■
All I/O addresses in Table 5 are in hexa-
decimal.
PhoenixBIOS Setup Utility
Advanced
Item Specific Help
IrDA Port Configurations
Infrared Port:
[Enabled]
[Disabled]
Mode:
[FIR]
The port is disabled.
I/O Address:
Interrupt:
I/O Address:
DMA Channel:
[2E8-2EF]
[IRQ 6]
[400-43F]
[DMA 3]
[Enabled]
The port is enabled
with user configuration.
[Auto]
Plug & Play OS
configure the port.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 5. IrDA Port Configuration Submenu
12
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Table 5: Fields, Options and Defaults for IrDA Port Configuration Submenu of Advanced Menu
Menu Field
Options
Default
Description
■
Infrared Port:
Disabled
Enabled
Auto
[Enabled]
Configures the infrared port using either no configuration (Disabled), a
user defined configuration (Enabled), or by allowing the BIOS or OS to
choose the configuration (Auto).
■
■
■
■
Mode:
IrDA
FIR
[FIR]
Select whether to use normal infrared or fast infrared mode.
■
■
■
■
I/O Address:
3F8 - 3FF
2F8 - 2FF
3E8 - 3EF
2E8 - 2EF
[2E8 - 2EF]
Allows user to set the infrared port base I/O address when infrared port is
Enabled.
■
■
■
■
Interrupt:
IRQ 3
IRQ 6
IRQ 10
IRQ 11
[IRQ 6]
Allows user to set the infrared port interrupt when infrared port is Enabled.
Allows user to set the infrared port I/O address when FIR is Enabled.
■
■
■
■
I/O Address:
DMA Channel:
400 - 43F
480 - 4BF
500 - 53F
580 - 5BF
[400 - 43F]
[DMA 3]
■
■
DMA 1
DMA 3
Allows user to set the infrared port DMA Channel when the infrared port
is Enabled.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Keyboard/Mouse Features Submenu of the Advanced Menu
The Keyboard/Mouse Features submenu is for setting the parameters of NumLock.
PhoenixBIOS Setup Utility
Advanced
Security
Power Savings
Exit
Keyboard/Mouse Features
[Off]
Item Specific Help
Numlock:
Selects power-on state
for Numlock.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 6. Keyboard/Mouse Features Submenu
Table 6: Fields, Options and Defaults for the Keyboard/Mouse Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Numlock:
On
Off
[Off]
Sets the NumLock function state when the computer completes
booting.
■
■
On/Padlock Off
14
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Video Features Submenu of the Advanced Menu
The Video Features Submenu is for setting the display parameters.
PhoenixBIOS Setup Utility
Security Power Savings Exit
Main
Advanced
Video Features
Item Specific Help
Display:
[Auto]
Select display terminal.
Compensation: [Enabled]
* This setting is not
effective after
operating system
starts up.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 7. Video Features Submenu
Table 7: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Display:
Internal Flat Panel
[Auto]
Selects where the video signal will be routed.
■
■
■
External (Analog)
External (Digital)
Auto
■
■
Compensation:
Disabled
Enabled
[Enabled]
Enables or disables display compensation. Display com-
pensation is used to match the native resolution of the
display with the input. For example, if you are using an
application whose resolution causes it to appear smaller
than the screen, enabling Compensation will expand the
image to fill the screen.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Internal Device Configurations Submenu of the Advanced Menu
The Internal Device Configuration submenu allows the user to configure other internal devices.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Internal Device Configurations
[Disabled]
No IDE ports are
enabled.
IDE Contoller:
Bluetooth(R):
Modem Controller:
LAN Controller:
Wireless LAN:
[Both]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Primary]
Only primary IDE port
is enabled.
[Secondary]
Only secondary IDE port
is enabled.
[Both]
Both primary and
secondary IDE ports
are enabled.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 8. Internal Device Configuration Submenu
Table 8: Fields, Options and Defaults for the Internal Device Configuration Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
IDE Controller:
Disabled
Primary
Secondary
Both
[Both]
Allows you to enable and/or disable any or all IDE devices.
■
■
■
■
Bluetooth(R):
Disabled
Enabled
[Enabled]
[Enabled]
[Enabled]
Enables or disables the optional Bluetooth device.
Enables or disables the modem device.
■
■
Modem Controller:
LAN Controller:
Disabled
Enabled
■
■
Disabled
Enabled
Auto
Enables or disables the LAN controller.When Auto is selected, the
LAN will be disabled when the system is running on battery power
and the LAN cable is not connected.
Note: If Auto is selected, you will need to attach your Ethernet
cable prior to booting up the system.
■
■
■
■
Wireless LAN:
Disabled
Enabled
[Enabled]
Enables or disables the optional wireless LAN device.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
CPU Features Submenu of the Advanced Menu
The CPU Features Submenu allows the user to modify the Intel(R) SpeedStep(R) Technology features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
CPU Features
Select Enhanced
Intel(R) SpeedStep(R)
Technology enabled or
disabled.
SpeedStep(R) Technology:
On Battery:
On AC:
[Enabled]
[Battery Optimized]
[Maximum Performance]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 9. CPU Features Submenu
Table 9: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
SpeedStep(R)
Technology:
Disabled
Enabled
[Enabled]
Enables or disables SpeedStep(R) Technology which
allows the user to determine the CPU performance when
the tablet is running on AC or battery. This technology
decreases power consumption by decreasing CPU speeds.
■
■
On Battery:
On AC:
Maximum Performance
Battery Optimized
Automatic
[Battery Optimized]
Allows the user to select the CPU performance when the
system is running on battery power.
■
■
■
Maximum Performance
Battery Optimized
Automatic
[Maximum Performance]
Allows the user to select the CPU performance when the
system is running on AC power.
■
■
17
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
USB Features Submenu of the Advanced Menu
The USB Features Submenu configures the USB features for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
USB Features
Item Specific Help
[Enabled]
Legacy USB Support:
[Disabled]
SCSI SubClass Support:
[Enabled]
The feature is disabled.
[Enabled]
Legacy Floppy Emulation
is enabled and USB
floppy is available
without USB aware OS.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 10. USB Features Submenu
Table 10: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu
Menu Field
Options
Default
Description
■
Legacy USB
Support:
Disabled
Enabled
[Enabled]
When Disabled is selected, legacy USB emulation is disabled. When
Enabled is selected, legacy USB emulation is enabled and USB
devices are available without USB-aware OS.
■
■
SCSI SubClass
Support:
Disabled
Enabled
[Enabled]
When Enabled is selected, USB devices that belong to the SCSI sub-
class in the mass storage class (e.g., USB Memory Key) are enabled.
■
18
Download from Www.Somanuals.com. All Manuals Search And Download.
A d v a n c e d M e n u
Miscellaneous Configurations Submenu of the Advanced Menu
The Miscellaneous Configurations Submenu configures miscellaneous features for your system.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Item Specific Help
Miscellaneous Configurations
Power Button:
[Disabled]
[Disabled]
[Off]
Configures the power
button.
Wake up on LAN:
Auto Save To Disk:
Volume Setting:
[Middle]
*ACPI OS ignores this
setting.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter Select
Sub-Menu
Figure 11. Miscellaneous Configurations Submenu
Table 11: Fields, Options and Defaults for the Miscellaneous Configurations Submenu
Menu Field
Options
Default
Description
■
Power Button:
Disabled
Power Off
[DIsabled]
When Disabled is selected, the power button does not respond to a
press. When Power Off is selected, the button turns the power off.
■
■
Wake up on LAN:
Auto Save To Disk:
Disabled
Enabled
[Disabled]
[Off]
When Enabled is selected, the system will wake up when the internal
LAN device receives a Magic Packet while the system is powered off.
■
■
Off
On
Turns the Auto Save To Disk feature on and off. When turned on,
when low battery state is reached, the system in suspend state will
save its state to disk and power off.
■
■
Volume Setting:
Off
Minimum
Middle
Maximum
[Middle]
Allows you to set or disable the system volume level.
■
■
■
19
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Event Logging Submenu of the Advanced Menu
The Event Logging Submenu configures event logging features for DMI events.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Event Logging
Item Specific Help
Event Log Capacity:
Event Log Validity:
Space Available
Valid
Press <Enter> key to
view the contents of
the event log.
View Event Log:
[Enter]
Event Logging:
[Enabled]
System Boot Event:
[Disabled]
Clear All Event Logs:
Mark Events as Read:
[No]
[Enter]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select
F9 Setup Defaults
F10 Save and Exit
Sub-Menu
Figure 12. Event Logging Submenu
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu
Menu Field
Options
Default
Description
Event Log
Capacity:
Space Available
Display only.
Event Log Validity:
View Event Log:
Event Logging:
Valid
Display only.
■
Enter
[Enter]
[Enabled]
Allows you to view content of event log.
Turns event logging on and off for all DMI events.
■
Disabled
Enabled
■
■
System Boot
Event:
Disabled
Enabled
[Disabled]
[No]
Turns event logging on and off for DMI system boot events.
When set to [Yes] all event logs will be cleared at next boot.
Allows you to make all events currently in the event log as read.
■
■
Clear All Event
Logs:
No
Yes
■
■
Mark Events as
Read:
Enter
[Enter]
20
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your tablet to fit your operating needs and to
view the current data security configuration. Follow the
instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating through the Setup
Utility on page 2 for more information)
■
If you set a password, write it down and
keep it in a safe place. If you forget the
password you will have to contact your
support representative to regain access
to your secured functions and data.
■
If you make an error when re-entering
the password a [Warning] will be dis-
played on the screen. To try again press
the [Enter] key and then retype the pass-
word. Press the [Esc] key to abort the
password setting process.
Entering a password incorrectly three times
in a row will cause the keyboard and
mouse to be locked out and the warning
[System Disabled]to be displayed. If
this happens, restart the computer by
turning off and on the power with the
power switch and use the correct
password on reboot. Note: Unless you
have previously enabled the power switch
in the BIOS, it will not be possible to turn
off the unit with the switch. This is
■
If the Password on Boot is Disabled you
will not have to type your password
upon resuming the system from the Sus-
pend or Save-to-Disk modes.
The following tables show the names of the menu fields
for the Security menu and its submenus, the options for
each field, the default settings and a description of the
field's function and any special information needed to
help understand the field's use. The default condition is
no passwords required and no write protection.
applicable for non-ACPI OS’s.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Supervisor Password Is:
User Password Is:
Clear
Clear
Press <Enter> key to
set Supervisor Password
to enable any password
features.
Set Supervisor Password
Set User Password
Minimum User Password Length: [0]
[Enter]
[Enter]
Password on Boot:
[Disabled]
Then password entry is
required to enter BIOS
Setup.
On Automatic Wake up:
Boot from Removable Media:
Flash Write:
[Disabled]
[All]
[Enabled]
Hard Disk Security
Owner Information
Security Chip Setting
Security Panel On Resume:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 13. Security Menu
21
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Table 13: Fields, Options and Defaults for the Security Menu
Menu Field
Options
Default
Description
Supervisor
Password is:
–—
Clear
A display-only field. Set is displayed when the system Supervisor
Password is set and Clear when it is not.
User Password is:
–—
Clear
A display-only field. Set is displayed when the general User Password is
set, and Clear when it is not.
Set Supervisor
Password
[Enter]
[Enter]
Sets, changes or cancels Supervisor Password. The Supervisor Password
may be up to eight characters long and include only letters or numbers
(no symbols). Passwords are NOT case- sensitive. To cancel a password
press the Enter key instead of entering characters in the Enter New Pass-
word field and in the Re-enter New Password field. When a Supervisor
Password is set it must be used to access the BIOS setup utility.
Set User Password
[Enter]
[Enter]
This field can only be accessed if the Supervisor Password is set. Sets,
changes or cancels the User Password. The User Password may be up to
eight characters long and must include only letters or numbers (no
symbols). Passwords are NOT case-sensitive. To cancel a password press
the Enter key instead of entering characters in the Enter New Password
field and in the Re-enter New Password field. When a User Password is
set it must be used to access the BIOS setup utility.
Minimum User
[0]
[0]
Sets the minimum length for User Password.
Password Length:
■
Password on Boot:
Disabled
First Boot
Every Boot
[Disabled]
When Enabled, a password (User or Supervisor) is required after the
Power On Self Test (POST) before the operating system will be read from
a disk. When set to Disabled no password is required. If no Supervisor
Password is set this feature is not available and no password is required.
■
■
■
■
On Automatic
Wake up:
Disabled
Enabled
[Disabled]
This field is active only when Password On Boot is set to First Boot or
Every Boot. When disabled, password entry is not required on automatic
wake up on LAN or Real Time Clock. When enabled, the password is still
required on automatic wake up.
■
■
Boot from
Removable Media:
All
[All]
Selecting Supervisor Only allows supervisor access only.
Supervisor only
■
■
Flash Write:
Disabled
Enabled
[Enabled]
When set to disabled, the BIOS Flash Memory will be write-protected.
Hard Disk Security
–—
–—
–—
–—
Submenu that allows you to configure hard disk security features.
Submenu that allows you to set Owner information.
Owner
Information
Security Chip
Setting
–—
–—
Submenu that allows you to configure the security chip.
■
Security Panel On
Resume
Disabled
Enabled
[Enabled]
Allows the Security Panel Feature to be enabled or disabled upon
Suspend from Resume.
■
22
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security Submenu is for configuring hard disk security features.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Hard Disk Security
Item Specific Help
Primary Master Password Is:
Secondary Master Password Is:
Clear
Not Available
Press <Enter> key to
set Hard Disk Password.
The hard disk is locked
with the password. Data
in the locked disk can
not be read on other
systems.
[Enter]
[Enter]
Set Primary Master Password:
Set Secondary Master Password
Password Entry on Boot:
[Enabled]
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 14. Hard Disk Security Submenu
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Default
Description
Primary
Master
Password Is:
___
Clear
Display-only. Default is Clear. When the Primary Master Password has been set,
the field changes to Set. When this password is set, the primary hard disk drive
cannot be used in another system unless the password is entered.
Secondary
Master
Password Is:
___
___
Not
Available
Display only.
Set Primary
Master
Password:
[Enter]
Sets, changes or cancels the Primary Master Password. The Primary Master Pass-
word may be up to seven characters long and must include only letters or num-
bers (no symbols). Passwords are NOT case-sensitive. When a Primary Master
Password is set, it must be used to access the primary hard drive if it is used in
another system. Note that the password will not take effect until the system has
been rebooted.
Set Secondary
Master
___
[Enter]
Not currently available.
Password:
Password
Entry on Boot:
• Disabled
• Enabled
[Enabled]
When disabled, it is not necessary to enter a Hard Disk Password before booting.
The hard disk is still password-protected without entering a password.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
Owner Information Submenu of the Security Menu
The Owner Information Submenu is for setting owner information. Note that Owner Information cannot be set
without having entered a supervisor’s password.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Owner Information
Item Specific Help
Owner Information Is:
Set Owner Information
Clear
Press <Enter> key to
set owner information.
Up to 80 characters can
be set. Available
characters are ASCII
codes from 32 through
126.
[Enter]
Foreground Color:
Background Color:
[Gray]
[Black]
The owner information
is always displayed at
the bottom line of the
screen during POST.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 15. Owner Information Submenu
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu
Menu Field
Options
Default
Description
Owner
–—
Clear
Display only.
Information Is:
Set Owner
Information:
–—
[Enter]
[Gray]
Field to write owner infor-
mation (e.g., your name).
■
■
■
■
■
■
■
■
■
■
■
■
■
Foreground
Color:
Black
Blue
Green
Red
Gray
Light Red
Light Magenta
Yellow
Set foreground color.
■
Magenta
Brown
White
Light Blue
Light Green
Light Cyan
■
■
Cyan
Bright White
■
■
■
■
■
■
■
■
■
■
■
■
■
Background
Color:
Black
Blue
Green
Cyan
Red
Gray
Light Red
Light Magenta
Yellow
[Black]
Sets background color.
■
Magenta
Brown
White
Light Blue
Light Green
Light Cyan
■
■
Bright White
24
Download from Www.Somanuals.com. All Manuals Search And Download.
S e c u r i t y M e n u
Security Chip Setting Submenu of the Security Menu
The Security Chip Setting Submenu is for enabling or disabling the embedded security chip.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Exit
Security Chip Setting
[Disabled]
Item Specific Help
Security Chip:
Select Security Chip
enabled or disabled.
* A reboot is required
after exit to configure
Security Chip correctly.
Clear Security Chip
becomes selectable
after the reboot.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 16. Security Chip Setting Submenu
Table 16: Fields, Options and Defaults for the Security Chip Setting Submenu of the Security Menu
Menu Field
Options
Default
Description
Security Chip:
• Disabled
• Enabled
[Disabled]
Select to enable or disable the security chip. Note that after configuring the
security chip, a system reboot is required.
Exiting from the Security Menu
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to
another menu, use the cursor keys.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE
The Boot Menu is used to select the order in which the
BIOS searches sources for the operating system. Follow
the instructions for Navigating Through the Setup
Utility to make any changes. (See Navigating through the
Setup Utility on page 2 for more information)
The following tables show the names of the menu fields
for the Boot menu and its submenu, all of the options
for each field, the default settings and a description of
the field's function and any special information needed
to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Info
Exit
Item Specific Help
Quick Boot:
[Enabled]
Boot Time Diagnostic Screen:
Boot Menu:
Preboot Execution Environment:
Boot Device Priority
[Disabled]
[Enabled]
[Disabled]
[Disabled]
All diagnostic tests
will be done.
[Enabled]
Some diagnostic tests
may be skipped while
booting to speed up.
F1 Help
ESC Exit
Select Item -/Space Change Values
Select Menu Enter
Select Sub-Menu
F9 Setup Defaults
F10 Save and Exit
Figure 17. Boot Menu
Table 17: Fields, Options and Defaults for the Boot Menu
Menu Field
Options
Default
Description
■
Quick Boot:
Disabled
Enabled
[Enabled]
Turns on and off booting with a truncated set of Power On Self Tests. (Fewer
tests mean faster turn on.)
■
■
Boot Time
Diagnostic Screen:
Disabled
Enabled
[Disabled]
[Enabled]
[Disabled]
__
Turns on and off display of test results instead of Fujitsu logo screen during
Power On Self Test.
■
■
Boot Menu:
Disabled
Enabled
When disabled, the [F12] key cannot be used to invoke the Boot menu. When
enabled, click the [F12] button to display the Boot menu while booting up.
■
■
Preboot Execution
Environment:
Disabled
Enabled
Turns on and off boot from network server options.
■
Boot Device
Priority:
Selects Boot
Device Priority
submenu
This menu allows setting up the source for the operating system. See “Boot
Device Priority Submenu” in the following section. Pressing the [F12] key will
also let you choose the boot device.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
B o o t M e n u
The Boot Device Priority Submenu of the Boot Menu
The Boot Device Priority Submenu is for setting the
order of checking of sources for the operating system.
Be aware of the operating environment
when booting from a CD-ROM or you
may overwrite files by mistake.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Power Savings
Boot
Boot Device Priority
Item Specific Help
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
Keys used to view or
configure devices:
<Enter> expands or
collapses devices with
a + or -.
<Ctrl+Enter> expands
all.
<Shift+1> enables or
disables a device.
<+>/<Space> or <->
moves the device up or
down.
<d> removes a device
that is not installed.
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
F9 Setup Defaults
F10 Save and Exit
Enter
Select
Sub-Menu
Figure 18. Boot Device Priority Submenu
Table 18: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu
Menu Field
Description
+Floppy Disk Drive
+Hard Disk Drive
CD-ROM Drive
The boot selections determine the order in which the BIOS searches for the operating system during a startup
sequence. To change the order highlight one source by using the [up] or [down] cursor keys and then press the
[+] or [-] key to change the order number for that source. Be sure to save your changed order when you exit the
BIOS setup utility.
Exiting from Boot Menu
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish
to move to another menu, use the cursor keys.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
L i f e B o o k
T
S e r i e s T a b l e t P C
INFO MENU – DISPLAYS BASIC SYSTEM INFORMATION
The Info menu is a display only screens that provides the
configuration information for your tablet.
those fields. These fields are for information purposes
only, and are not editable.
The following table shows the names of the menu fields
for the Info menu and the information displayed in
The information, including CPU type and
speed, and total memory, displayed on this
screen varies according to the unit you
purchased.
PhoenixBIOS Setup Utility
Security Boot Info
Main
Advanced
Exit
Item Specific Help
BIOS Version:
BIOS Date:
1.03
09/22/2004
BIOS Area:
E000h - FFFFh
CPU Type:
CPU Speed:
L1 Cache:
L2 Cache:
Intel(R) Pentium(R) M 745
1.80 GHz
64 KB
2048 KB
Total Memory:
512 MB
Memory Slot 1: 512 MB DDR SDRAM
Memory Slot 2: None
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 19. Info Menu
Table 19: Fields, Options and Defaults for the Info Menu
Note that the parameters listed in the following table may be different, depending upon your system configuration.
Menu Field
Default
Menu Field
Default
BIOS Version:
1.03
L1 Cache:
64 KB
BIOS Date:
BIOS Area:
CPU Type:
CPU Speed:
09/22/2004
L2 Cache:
2048 KB
512 MB
E000h – FFFFh
Intel(R) Pentium(R) M 745
1.80 GHz
Total Memory:
Memory Slot 1:
Memory Slot 2:
512 MB DDR SDRAM
None
28
Download from Www.Somanuals.com. All Manuals Search And Download.
E x i t M e n u
EXIT MENU – LEAVING THE SETUP UTILITY
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through the Setup Utility to
make any changes. (See Navigating through the Setup Utility on page 2 for more information). The following table shows
the names of the menu fields for the Exit menu, the default settings and a description of the field's function and any
special information needed to help understand the field's use.
PhoenixBIOS Setup Utility
Main
Advanced
Security
Boot
Exit
Item Specific Help
Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Discard Changes
Exit System Setup and
save your changes to
CMOS.
Save Changes
F1 Help
ESC Exit
Select Item
Select Menu
-/Space Change Values
Enter Select Sub-Menu
F9
Setup Defaults
F10 Save and Exit
Figure 20. Exit Menu
Table 20: Fields, Options and Defaults for the Exit Menu
Menu Field
Description
Exit Saving
Changes
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility to the BIOS memory and
then exit the setup utility. A confirmation message Save Configuration changes and exit now? [Yes]
[No] will be displayed.
Exit Discarding
Changes
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to the BIOS memory. When the
BIOS recognizes this selection it will load the operating system and begin operation.
Load Setup
Defaults
Selecting Load Setup Defaults will load the factory preset default values for all menu fields, then display the message
Load default configuration now? [Yes] [No]. When confirmed the setup utility will return to the Exit
Menu. To return to another menu follow the directions in the Navigating Through the Setup Utility Section.
Discard Changes
Save Changes
Selecting Discard Changes will load the previous values in BIOS memory for all menu fields. The message Load
previous now? [Yes] [No] will be displayed. When confirmed the utility will return to the Exit menu. To
return to another menu, follow the directions in the Navigating Through the Setup Utility Section.
Selecting Save Changes causes the new settings in all menus to be written to the BIOS memory. The message Save
configuration changes now? [Yes] [No] will be displayed. When confirmed, the setup utility will return
to the Exit menu. To go to another menu, follow the directions in the Navigating Through the Setup Utility section.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
|