Fujitsu Laptop P2110 User Manual

Fujitsu LifeBook  
P Series  
BIOS Guide  
LifeBook P Series Model:  
P2110  
Document Date: 05/31/02  
Document Part Number: FPC58-0680-01  
F U J I T S U P C C O R P O R AT I O N  
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
MAIN MENU – SETTING STANDARD SYSTEM PARAMETERS  
The Main Menu allows you to set or view the current  
system parameters. Follow the instructions for  
Navigating Through the Setup Utility to make any  
changes.  
the field’s function and any special information needed  
to help understand the field’s use.  
P O I N T  
The following tables show the names of the menu fields  
for the Main menu and its submenus, all of the options  
for each field, the default settings and a description of  
System Time and System Date can also be set from your  
operating system without using the setup utility. Use  
the calendar and time icon on your Windows Control  
Panel.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
System Time:  
System Date:  
[14:57:01]  
[05/26/2002]  
Adjust calendar clock.  
Primary Master  
Secondary Master  
[TOSHIBA MK3017GAP-(PM)]  
[None]  
<Tab>, <Shift-Tab>, or  
<Enter> selects field.  
Language:  
[English (US)]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 1. Main Menu  
Menu Field  
Options  
Default  
Description  
System Time:  
–—  
–—  
Sets and displays the current time. Time is in a 24 hour format  
of hours:minutes:seconds with 2 digits for each. (HH:MM:SS).  
Example: 16:45:57. You may change each segment of the time  
separately. Move between the segments with the [Tab] key  
and/or [Shift] + [Tab] keys.  
System Date:  
–—  
–—  
Sets and displays the current date. Date is in a month/day/year  
numeric format with 2 digits each for month and day and 4 dig-  
its for year. (MM/DD/YYYY) for example: 03/20/1998. You  
may change each segment of the date separately. Move  
between the segments with the [Tab] key and/or [Shift] + [Tab]  
keys.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Menu Field  
Options  
Default  
Description  
Primary Master:  
Selects Primary  
Master submenu  
–—  
Displays the type of device on this ATA/ATAPI interface, if there  
is one. Pressing the Enter key selects the Primary Master  
submenu allowing additional device configuration options for  
this interface.  
Secondary  
Master:  
Selects  
Secondary  
Master submenu  
–—  
Displays the type of device on this ATA/ATAPI interface, if there  
is one. Pressing the Enter key selects the Secondary Master  
submenu allowing additional device configuration options for  
this interface.  
Language:  
English (US)  
Japanese (JP)  
[English  
(US)]  
The default setting differs between the US/European and the  
Japanese model. Selects the display language for the BIOS.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
Note: Actual hard drive label shown may vary. Depending  
on the drive type, information such as cylinders, heads and  
sectors may also be displayed.  
Primary Master Submenu of the Main Menu  
The Primary Master submenu identifies which ATA  
devices are installed.  
PhoenixBIOS Setup Utility  
Security Power Boot  
Main  
Advanced  
Info  
Exit  
Item Specific Help  
Primary Master [TOSHIBA MK3017GAP-(PM)]  
Select ATA/ATAPI drive  
installed here.  
Type:  
Maximum Capacity:  
[Auto]  
30006MB  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Multi-Sector Transfers:  
LBA Mode Control:  
PIO Transfer Mode:  
DMA Transfer Mode:  
[16 Sectors]  
[Enabled]  
[FAST PIO 4]  
[Ultra DMA 4]  
Except [Auto]  
You enter parameters of  
the drive.  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9  
Setup Defaults  
Enter  
Select  
Sub-Menu  
F10 Save and Exit  
Figure 2. Primary Master Submenu  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
None  
CD-ROM  
Hard Disk  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the type  
automatically identified by the BIOS at POST. If None is selected,  
all of the following Set-up items do not appear. If Hard Disk is  
selected, you must specify the number of Cylinders, Heads, and  
Sectors for the drive. Select CD-ROM to select parameters for  
CD-ROM drive.  
Cylinders:  
Heads:  
A number  
between 0  
and 65,535  
–—  
–—  
This item appears only when the type is identified as Hard Disk.  
When Hard Disk is selected, you can change the value. This field  
is changed by incrementing (pressing the [Spacebar]) or by typing  
in the number.  
A number  
between 1  
and 16  
This item appears only when the type is identified as Hard Disk.  
When Hard Disk is selected, you can change the value. This field  
is changed by incrementing (pressing the [Spacebar]) or by typing  
in the number.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Table 2: Fields, Options and Defaults for the Primary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Sectors:  
A number  
between 0  
and 63  
–—  
This item appears only when the type is identified as Hard Disk.  
When Hard Disk is selected, you can change the value. This field  
is changed by incrementing (pressing the [Spacebar]) or by typing  
in the number.  
Maximum  
Capacity:  
Display only  
–—  
Displays the maximum capacity of the drive calculated from the  
parameters of the hard disk when Hard Disk is selected.  
Multi-  
Sector  
Transfers:  
Disabled  
[16 Sectors]  
This option cannot be changed when Auto is selected. Specify the  
number of sectors per block for multiple sector transfer.  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors  
32 Sectors  
64 Sectors  
128 Sectors  
LBA Mode  
Control:  
Disabled  
Enabled  
[Enabled]  
Enables or disables logical Block Addressing in place of Cylinder,  
Head, Sector addressing. This option cannot be changed when  
Auto is selected.  
PIO  
Transfer  
Mode:  
Standard  
[Fast PI0 4]  
Selects the method for moving data to/from the drive. Autotype  
the drive to select the optimum transfer mode. This option cannot  
be changed when Auto is selected. Multi-word DMA is automati-  
cally set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set  
to mode 2 for Fast PIO 4 / DMA.  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
DMA  
Transfer  
Mode:  
Disabled  
Multiword  
DMA 1  
Multiword  
DMA 2  
[Ultra  
DMA 4]  
Selects the method for moving data to/from the drive. Autotype  
the drive to select the optimum transfer mode. This option cannot  
be changed when Auto is selected.  
Ultra DMA 0  
Ultra DMA 1  
Ultra DMA 2  
Ultra DMA 3  
Ultra DMA 4  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
M a i n M e n u  
Note: Actual drive label shown may vary. Depending on the  
drive type, information such as cylinders, heads and sectors  
may also be displayed.  
Secondary Master Submenu of the Main Menu  
The Secondary Master submenu identifies which ATA  
devices are installed.  
PhoenixBIOS Setup Utility  
Security Power Boot  
Main  
Advanced  
Info  
Exit  
Secondary Master [SONY CD-RW CRX800E-(SM)]  
Item Specific Help  
Select ATA/ATAPI drive  
installed here.  
Type:  
[Auto]]  
Multi-Sector Transfers:  
LBA Mode Control:  
PIO Transfer Mode:  
DMA Transfer Mode:  
[Disabled]  
[Disabled]  
[Disabled]  
[Disabled]  
[Auto]  
The BIOS auto-types the  
drive on boot time.  
Except [Auto]  
You enter parameters of  
the drive.  
[None]  
The drive is disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9  
Setup Defaults  
Enter  
Select  
Sub-Menu  
F10 Save and Exit  
Figure 3. Secondary Master Submenu  
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Type:  
Auto  
None  
Hard Disk  
CD-ROM  
[Auto]  
Selects the ATA/ATAPI device type. Select Auto to have the type  
automatically identified by the BIOS at POST. If None is selected, all  
of the following Set-up items do not appear. If Hard Disk is selected,  
you must specify the number of Cylinders, Heads, and Sectors for  
the drive. Select CD-ROM to select parameters for CD-ROM drive.  
Cylinders:  
Heads:  
A number  
between 0  
and 65,535  
–—  
–—  
This item appears only when the type is identified as Hard Disk.  
When Hard Disk is selected, you can change the value. This field is  
changed by incrementing (pressing the [Spacebar]) or by typing in  
the number.  
A number  
between 1  
and 16  
This item appears only when the type is identified as Auto or Hard  
Disk. When Hard Disk is selected, you can change the value. This  
field is changed by incrementing (pressing the [Spacebar]) or by  
typing in the number.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Table 3: Fields, Options and Defaults for the Secondary Master Submenu of the Main Menu  
Menu Field  
Options  
Default  
Description  
Sectors:  
A number  
between 0  
and 63  
–—  
This item appears only when the type is identified as Auto or Hard  
Disk. When Hard Disk is selected, you can change the value. This  
field is changed by incrementing (pressing the [Spacebar]) or by typ-  
ing in the number.  
Maximum  
Capacity:  
Display only  
–—  
Displays the maximum capacity of the drive calculated from the  
parameters of the hard disk when Hard Disk is selected.  
Multi-Sector  
Transfers:  
Disabled  
[Disabled]  
This option cannot be changed when Auto is selected. Specify the  
number of sectors per block for multiple sector transfer.  
2 Sectors  
4 Sectors  
8 Sectors  
16 Sectors  
32 Sectors  
64 Sectors  
128 Sectors  
LBA Mode  
Control:  
Disabled  
Enabled  
[Disabled]  
[Disabled]  
Enables or disables logical Block Addressing in place of Cylinder,  
Head, Sector addressing. This option cannot be changed when Auto  
is selected.  
PIO Transfer  
Mode:  
Standard  
Selects the method for moving data to/from the drive. Autotype the  
drive to select the optimum transfer mode. This option cannot be  
changed when Auto is selected. Multi-word DMA is automatically  
set to mode 1 for Fast PIO 1, Fast PIO 2, Fast PIO 3, and set to  
mode 2 for Fast PIO 4 / DMA.  
Fast PIO 1  
Fast PIO 2  
Fast PIO 3  
Fast PIO 4  
DMA  
Transfer  
Mode:  
Disabled  
Multiword  
DMA 1  
Multiword  
DMA 2  
[Disabled]  
Selects the method for moving data to/from the drive. Autotype the  
drive to select the optimum transfer mode. This option cannot be  
changed when Auto is selected.  
Ultra DMA 0  
Ultra DMA 1  
Ultra DMA 2  
Ultra DMA 3  
Ultra DMA 4  
Exiting from Main Menu  
When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to  
another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit menu.  
If you wish to move to another menu, use the cursor keys.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
ADVANCED MENU – SETTING DEVICE FEATURE CONTROLS  
The Advanced Menu allows you to:  
Follow the instructions for Navigating Through the  
Setup Utility to make any changes.  
Enable or disable support for Plug & Play  
operating systems.  
Select between the display panel and an external  
CRT display.  
Enable or disable compensation for your display.  
Configure PCI devices in your system.  
Configure CPU and USB features.  
The following tables show the names of the menu fields  
for the Advanced Menu and its submenus, all of the  
options for each field, the default settings and a descrip-  
tion of the field’s function and any special information  
needed to help understand the field’s use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
Plug & Play O/S:  
[No]  
[No]  
Keyboard/Mouse Features  
Video Features  
The BIOS configures  
also non-boot devices.  
Select if you are using  
a non-Plug & Play OS or  
a non-ACPI OS.  
Internal Device Configurations  
PCI Configurations  
CPU Features  
USB Features  
[Yes]  
Event Logging  
The BIOS configures  
only boot devices.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 4. Advanced Menu  
Table 4: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Plug & Play O/S:  
No  
Yes  
[No]  
Select Yes if you are using a Plug & Play capable operating system.  
Select No if you need the BIOS to configure non-boot devices.  
Keyboard/  
Mouse Features  
–—  
–—  
–—  
–—  
When selected, opens the Keyboard/Mouse Features submenu, which  
allows setting NumLock and Internal Pointing Device parameters.  
Video Features  
When selected, opens the Video Features submenu, which allows setting  
of the display parameters, including routing of video signals to different  
displays.  
Internal Device  
Configurations  
–—  
–—  
When selected, opens the Internal Device Configurations submenu, which  
allows enabling or disabling the IDE and LAN Controllers.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Table 4: Fields, Options and Defaults for the Advanced Menu  
Menu Field  
Options  
Default  
Description  
PCI Configura-  
tions  
–—  
–—  
When selected, allows you to open the IRQ Reservation window to desig-  
nate specific IRQs for use by legacy ISA devices.  
CPU Features  
–—  
–—  
Configures Processor Serial Number features of processor. LifeBook note-  
books with Intel SpeedStep software pre-installed provide the user the  
ability to set the processor performance.  
CPU Features  
USB Features  
Event Logging  
–—  
–—  
–—  
–—  
–—  
–—  
When selected, opens the CPU Features submenu, which allows enabling  
or disabling of Processor Serial Number feature.  
When selected, opens the USB Features submenu, which allows enabling  
or disabling USB.  
When selected, opens the event logging submenu which lets you view and  
enable the event log.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Keyboard/Mouse Features Submenu of the Advanced Menu  
The Keyboard/Mouse Features submenu is for setting the parameters of the integrated and external mouse and  
keyboard.  
.
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Keyboard/Mouse Features  
Item Specific Help  
Select power-on state  
for Numlock.  
Numlock:  
Internal Pointing Device:  
[Auto]  
[Manual Setting]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 5. Keyboard/Mouse Features Submenu  
Table 5: Fields, Options and Defaults for the Keyboard/Mouse Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Numlock:  
Auto  
On  
[Auto]  
Sets the NumLock function state when the computer  
completes booting.  
Off  
Internal  
Pointing Device:  
Manual  
[Manual  
Setting]  
Configures the internal pointing device. When Manual  
Setting is selected, the internal pointing device can be  
enabled or disabled by using the [Fn] + [F4] keys. When  
Always Enabled is selected, the internal device is always  
selected. When Always Disabled is selected, the internal  
pointing device cannot be used.  
Setting  
Always  
Enabled  
Always  
Disabled  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Video Features Submenu of the Advanced Menu  
The Video Features Submenu is for setting the display parameters.  
PhoenixBIOS Setup Utility  
Security Power Savings Exit  
Main  
Advanced  
Video Features  
[Internal Flat Panel]  
Item Specific Help  
Display  
Compensation: [Enabled]  
Select display terminal.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 6. Video Features Submenu  
Table 6: Fields, Options and Defaults for the Video Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Display:  
Internal  
[Internal  
Flat-Panel]  
Selects where the video signal will be routed.  
Flat-Panel  
External  
Simultaneous  
Compensation:  
Disabled  
Enabled  
[Enabled]  
Enables or disables compensation which controls spacing  
on the display. When enabled, displays with less than pixel  
resolution 800 x 600 will still cover the entire screen.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
Internal Device Configurations Submenu of the Advanced Menu  
The Internal Device Configurations submenu allows the user to configure other internal devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Internal Device Configurations  
Item Specific Help  
IDE Controller:  
LAN Controller:  
[Both]  
[Auto]  
[Disabled]  
No IDE ports  
are enabled.  
[Primary]  
Only primary IDE  
port is enabled.  
[Both]  
Both primary and  
secondary ports are  
enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 7. Internal Device Configurations Submenu  
Table 7: Fields, Options and Defaults for the Internal Device Configurations Submenu of Advanced Menu  
Menu Field  
Options  
Default  
Description  
IDE Controller:  
Disabled  
Primary  
Both  
[Both]  
Enables or disables selected IDE devices.  
LAN Controller:  
Disabled  
Enabled  
Auto  
[Auto]  
Enables or disables LAN controller.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
PCI Configurations Submenu of the Advanced Menu  
The PCI Configurations submenu allows the user to reserve specific interrupts (IRQs) for legacy ISA devices, and to  
enable or disable built in PCI device modules.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
PCI Configurations  
IRQ Reservation  
Item Specific Help  
Reserve specific IRQs  
for use by legacy ISA  
devices.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 8. PCI Configurations Submenu  
Table 8: Fields, Options and Defaults for the PCI Configurations Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
IRQ Reservation  
–—  
–—  
Reserve specific IRQs for use by legacy ISA devices.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
IRQ Reservation Submenu of the PCI Configurations Submenu  
The IRQ Reservation submenu of the PCI Configurations submenu allows the user to mark various IRQs as reserved for  
use by legacy ISA devices. When an IRQ is reserved, the BIOS does not use it for embedded PCI or ISA devices.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
IRQ Reservation  
Item Specific Help  
IRQ 3:  
IRQ 4:  
IRQ 5:  
IRQ 7:  
IRQ 9:  
IRQ 10:  
IRQ 11:  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
Reserve the specified  
IRQ for use by legacy  
ISA devices.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 9. IRQ Reservation Submenu  
Table 9: Fields, Options and Defaults for the IRQ Reservation Submenu of the PCI Configurations Submenu  
Menu Field  
Options  
Default  
Description  
IRQ 3:  
Available  
Reserved  
[Available]  
Reserves IRQ 3. If Reserved is selected, BIOS reserves IRQ 3 for use by  
legacy ISA devices and does not use it for embedded PCI/ISA devices.  
IRQ 3 is removed from the IRQ bitmap in the PCI IRQ routing table.  
IRQ 4:  
IRQ 5:  
IRQ 7:  
IRQ 9:  
IRQ 10:  
IRQ 11:  
Available  
Reserved  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
[Available]  
Reserves IRQ 4.  
Reserves IRQ 5.  
Reserves IRQ 7.  
Reserves IRQ 9.  
Reserves IRQ 10.  
Reserves IRQ 11.  
Available  
Reserved  
Available  
Reserved  
Available  
Reserved  
Available  
Reserved  
Available  
Reserved  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
CPU Features Submenu of the Advanced Menu  
The CPU Features submenu configures certain features of the CPU in the system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
[Disabled]  
Exit  
CPU Features  
Item Specific Help  
Processor Serial Number:  
Configures Processor  
Serial Number feature.  
[Disabled]  
Processor Serial Number  
feature is disabled.  
[Enabled]  
Processor Serial Number  
feature is enabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 10. CPU Features Submenu  
Table 10: Fields, Options and Defaults for the CPU Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Processor Serial  
Number:  
Enabled  
Disabled  
[Disabled]  
Enables or disables the Processor Serial Number feature of  
the processor.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
A d v a n c e d M e n u  
USB Features Submenu of the Advanced Menu  
The USB Features submenu configures the USB capabilities of the system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
USB Features  
Item Specific Help  
USB Floppy Disk:  
[Enabled]  
[Disabled]  
Legacy Floppy Emulation  
is disabled.  
[Enabled]  
Legacy Floppy Emulation  
is enabled and USB  
floppy is available  
without USB aware OS.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 11. USB Features Submenu  
Table 11: Fields, Options and Defaults for the USB Features Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
USB Floppy  
Disk:  
Disabled  
Enabled  
[Enabled]  
When enabled, Legacy Floppy Emulation is enabled.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Event Logging Submenu of the Advanced Menu  
The Event Logging submenu is for setting up the logs for DMI event logging.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Event Logging  
Item Specific Help  
Event Log Capacity:  
Event Log Validity:  
Space Available  
Valid  
Press <Enter> key to  
view the contents of  
the event log.  
View Event Log:  
[Enter]  
Event Logging:  
[Enabled]  
System Boot Event:  
[Disabled]  
Clear All Event Logs:  
Mark Events as Read:  
[No]  
[Enter]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select  
F9 Setup Defaults  
F10 Save and Exit  
Sub-Menu  
Figure 12. Event Logging Submenu  
Table 12: Fields, Options and Defaults for the Event Logging Submenu of the Advanced Menu  
Menu Field  
Options  
Default  
Description  
Event Log Capacity:  
Space  
Display only  
Available  
Event Log Validity:  
View Event Log:  
Event Logging:  
Valid  
Display only  
Enter  
[Enter]  
[Enabled]  
Allows you to view content of event log.  
Turns event logging on and off for all DMI events.  
Disabled  
Enabled  
System Boot Event:  
Clear All Event Logs:  
Mark Events as Read:  
Disabled  
Enabled  
[Disabled]  
[No]  
Turns event logging on and off for DMI system boot events.  
When set to [Yes] all event logs will be cleared at next boot.  
Allows you to mark events currently in the event log as read.  
No  
Yes  
Enter  
[Enter]  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e c u r i t y M e n u  
SECURITY MENU – SETTING THE SECURITY FEATURES  
The Security menu allows you to set up the data security  
features of your notebook to fit your operating needs and  
to view the current data security configuration. Follow  
the instructions for Navigating Through the Setup Utility  
to make any changes.  
P O I N T S  
If you make an error when re-entering the password  
a [Warning] will be displayed on the screen. To try  
again, press the Enter key and then retype the pass-  
word. Press the Esc key to abort the password setting  
process.  
Entering a password incorrectly three times in a row  
will cause the keyboard and mouse to be locked out  
and the warning [System Disabled] to be displayed. If  
this happens, restart the computer by turning off and  
on the power with the power switch and use the  
correct password on reboot.  
The following tables show the names of the menu fields  
for the Security menu and its submenus, all the options  
for each field, the default settings and a description of the  
field's function and any special information needed to  
help understand the field's use. The default condition is  
no passwords required and no write protection.  
If the Password on Resume is Enabled and the Pass-  
word on Boot is Disabled you will not have to type  
your password upon resuming the system from the  
Suspend or Save-to-Disk modes. Power Management  
Security will work only if Password on Boot is  
enabled.  
P O I N T  
If you set a password, write it down and keep it in a  
safe place. If you forget the password you will have to  
contact your support representative to regain access to  
your secured functions and data.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
Supervisor Password Is:  
User Password Is:  
Clear  
Clear  
Press <Enter> key to  
set Supervisor password  
to enable any password  
features.  
Set Supervisor Password  
Set User Password  
Minimum User Password Length  
[Enter]  
[Enter]  
[0]  
Then password entry is  
required to enter BIOS  
Setup.  
Password on Boot:  
[Disabled]  
[Disabled]  
[All]  
Password on Resume:  
Boot from Removable Media:  
Floppy Disk Access:  
Hard Disk Security  
Owner Information  
[All]  
Hard Disk Boot Sector:  
[Normal]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 13. Security Menu  
Table 13: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
Supervisor  
Password is:  
–—  
Clear  
A display-only field. Set is displayed when the system supervisor  
password is set and Clear when it is not.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Table 13: Fields, Options and Defaults for the Security Menu  
Menu Field  
Options  
Default  
Description  
User Password is:  
–—  
Clear  
A display-only field. Set is displayed when the general user pass-  
word is set, and Clear when it is not.  
Set Supervisor  
Password  
–—  
–—  
–—  
[Enter]  
[Enter]  
Sets, changes or cancels the Supervisor Password. The Supervi-  
sor Password may be up to seven characters long and must  
include only letters or numbers (no symbols). Passwords are  
NOT case-sensitive. To cancel a password press the Enter key  
instead of entering characters in the Enter New Password field  
and in the Re-enter New Password field. When a Supervisor  
Password is set it must be used to access the BIOS setup utility.  
Set User Password  
Can only be accessed if Supervisor Password is set. Sets, changes  
or cancels User Password. User Password may be up to seven  
characters long and must include only letters or numbers (no  
symbols). Passwords are NOT case-sensitive. To cancel a pass-  
word press the Enter key instead of entering characters in the  
Enter New Password and Re-enter New Password fields. When a  
User Password is set it must be used to access the BIOS utility.  
Minimum User  
[0]  
–—  
Password Length:  
Password on Boot:  
Disabled  
First Boot  
Every Boot  
[Disabled]  
When set to Disabled, no password is required. When set to First  
Boot, password entry required only before first boot. When  
Every Boot is selected, password required whenever the system  
is booted.  
Password On  
Resume:  
Disabled  
Enabled  
[Disabled]  
[All]  
When Enabled, PS/2 keyboard or mouse inputs are locked out at  
Resume From Suspend or Save-to-Disk until entering password.  
Boot from  
Removable Media:  
All  
Supervisor  
only  
When Supervisor Only is selected, only the Supervisor can boot  
from removable media. Only the user who enters the Supervisor  
Password before OS boot is treated as the Supervisor. When All  
is selected, boot from removable media is not restricted.  
Floppy Disk Access:  
All  
Supervisor  
only  
[All]  
When Supervisor Only is selected, only the Supervisor can  
access the floppy disk. Only the user who enters the Supervisor  
Password before OS boot is treated as the Supervisor. When All  
is selected, floppy disk access is not restricted.  
Hard Disk Security:  
Owner Information:  
–—  
–—  
Configures hard disk security features.  
Sets Owner information.  
–—  
–—  
Hard Disk  
Normal  
[Normal]  
Sets protection mode for hard disk drive.  
Boot Sector:  
Write  
Protected  
Exiting from the Security Menu  
When you have finished setting the parameters on the Security Menu, you can either exit from setup utility or move to  
another menu. If you wish to exit from setup utility, press the [Esc] key to go to the Exit Menu. If you wish to move to  
another menu, use the cursor keys.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
S e c u r i t y M e n u  
Hard Disk Security Submenu of the Security Menu  
The Hard Disk Security submenu is for configuring hard disk security features.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Exit  
Hard Disk Security  
Item Specific Help  
Primary Master:  
[Disabled]  
Secondary Master:  
[Disabled]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 14. Hard Disk Security Submenu  
Table 14: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Primary Master:  
Disabled  
Enabled  
[Disabled]  
Disabled: No password protection.  
Enabled: Hard drive is locked with the password. Data in  
the locked disk cannot be read on any systems other than  
the original system on which it was locked, or on systems  
that have the identical password setting.  
Secondary  
Master:  
Disabled  
Enabled  
[Disabled]  
Disabled: No password protection.  
Enabled: Secondary Master device is locked with the pass-  
word. Data in the device cannot be read on any systems  
other than the original system on which it was locked, or  
on systems that have the identical password setting.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Owner Information Submenu of the Security Menu  
The Owner Information submenu is for setting owner information.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
Owner Information Is:  
Set Owner Information  
Clear  
[Enter]  
Foreground Color:  
Background Color:  
[Gray]  
[Black]  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 15. Owner Information Submenu  
Table 15: Fields, Options and Defaults for the Owner Information Submenu of the Security Menu  
Menu Field  
Options  
Default  
Description  
Owner Information  
Is:  
–—  
Clear  
Display only.  
Set Owner  
Information:  
–—  
[Enter]  
[Gray]  
Field to write owner  
information, i.e. name.  
Foreground Color:  
Black  
Blue  
Green  
Cyan  
Red  
Brown  
White  
Gray  
Light Blue  
Light  
Green  
Light Cyan  
Light Red  
Light  
Magenta  
Light Yellow  
Bright White  
Magenta  
Background Color:  
Black  
Blue  
Green  
Cyan  
Red  
Brown  
White  
Gray  
Light Blue  
Light  
Green  
Light Cyan  
Light Red  
Light  
Magenta  
Light Yellow  
Bright White  
[Black]  
Magenta  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P o w e r M e n u  
POWER MENU – SETTING POWER MANAGEMENT FEATURES  
The Power menu allows you to set and change the power management parameters. Follow the instructions for Navi-  
gating Through the Setup Utility to make any changes. The tables show the names of the menu fields for the Power  
menu and its submenus, the options for each field, the default settings and a description of the field's function and any  
special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power  
Boot  
Info  
Exit  
Item Specific Help  
Power Savings:  
[Customized]  
[Off]  
[Off]  
[4 Minutes]  
[15 Minutes]  
Hard Disk Timeout:  
Display Timeout:  
Standby Timeout:  
Auto Suspend Timeout:  
Select Power Management  
Mode. Choosing modes  
changes system power  
management settings.  
Maximum Power Savings  
conserves the greatest  
amount of system power  
while Maximum  
Suspend Mode:  
Auto Save To Disk:  
[Suspend]  
[Off]  
Resume On Modem Ring:  
Resume On Time:  
Resume Time:  
[Off]  
[Off]  
[00:00:00]  
Performance conserves  
power but allows  
greatest system  
performance. To alter  
these setting, choose  
Customize. To turn off  
power management,  
Advanced Features  
choose Disabled.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 16. Power Menu  
Table 16: Fields, Options and Defaults for the Power Menu  
Menu field  
Options  
Default  
Description  
Power  
Savings:  
Disabled  
Customized  
Maximum  
Power Savings  
[Customized]  
Sets the power savings parameters to a factory installed  
combination of parameters, a custom set of parameters set by you  
or no power saving features.  
Maximum  
Performance  
Hard Disk  
Timeout:  
Off  
30 seconds to  
20 Minutes  
[Off]  
[Off]  
Sets the length of time the hard drive can be inactive before the  
system automatically turns off power to the hard drive controller  
and drive motor. If you choose factory installed parameters, this  
field will display the setting. If you choose to customize the param-  
eters you will be able to set this yourself. The options available vary  
from Off, which has no inactivity shutoff, to 20 minutes.  
Display  
Timeout:  
Off  
2 to 20  
Minutes  
Sets the length of time without user input activity before the dis-  
play is turned off. If you choose factory parameters, this field will  
display the setting. If you choose to customize the parameters, you  
will be able to set this yourself. Off has no inactivity shutoff.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Table 16: Fields, Options and Defaults for the Power Menu  
Menu field  
Options  
Default  
Description  
Standby  
Timeout:  
Off  
1 to 16  
Minutes  
[4 Minutes]  
Sets the length of time without any user input device activity  
before the CPU is set to half speed and the display and the hard  
drive are turned off. If you choose a factory combination of param-  
eters this field will display the setting. If you choose to customize  
the parameters you will be able to set it yourself.  
Auto  
Suspend  
Timeout:  
Off  
5 to 60  
minutes  
[15 Minutes]  
[Suspend]  
Sets the length of time without any I/O activity before your note-  
book goes into Suspend mode. If you choose a factory combina-  
tion of parameters this field will display that setting. If you choose  
to customize the parameters you will be able to set this yourself.  
Off has no inactivity suspension.  
Suspend  
Mode:  
Suspend  
Save to Disk  
Sets the form of suspension state. If you choose Suspend, you will  
suspend operation with power to system memory, and everything  
else powered down or in a very low power state. If you choose  
Save-to-Disk your notebook will save all of system memory and  
the operating parameters to the hard drive before turning your  
notebook to the pseudo-off condition.  
Auto Save  
to Disk:  
Off  
After 1 Hour  
[Off]  
[Off]  
When set to “After 1 Hour”, your notebook will  
automatically save all system memory and the operating  
parameters to the hard drive and go to pseudo-off if the notebook  
is left in Suspend mode for more than an hour.  
Resume  
On  
Modem  
Ring:  
Off  
On  
Sets whether or not to Resume from a suspension state when a  
message is received by telephone line. This feature will not operate  
if the Save-to-Disk mode is enabled. This feature applies to internal  
and external modems.  
Resume  
On Time:  
Off  
On  
[Off]  
Sets whether or not to resume from a suspension state at a  
designated time. This feature is available from either the Suspend  
or Save-to-Disk modes.  
Resume  
Time:  
–—  
[00:00:00]  
Sets the designated time, on a 24-hour clock, when the notebook  
is to automatically resume operation from the Suspend state. The  
format of the clock setting is hours:minutes:seconds. Each segment  
of the time is set separately, either by incrementing or by typing in  
the numbers. You move between the segments with the [Tab] key  
or the [Shift]+[Tab] keys. This only applies when Resume on Time is  
set to On.  
Advanced  
Features:  
–—  
–—  
When selected, opens the Advanced Features submenu which  
allows setting additional power saving parameters.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
P o w e r M e n u  
Factory Installed Values for Power Saving Profiles  
Hard Disk  
Timeout  
Video  
Timeout  
Standby  
Timeout  
Auto Suspend  
Timeout  
Customized:  
Off  
Off  
4 Minutes  
1 Minute  
Off  
15 Minutes  
5 Minutes  
15 Minutes  
Off  
Maximum Power Savings:  
Maximum Performance:  
Disabled:  
30 Seconds  
Off  
2 Minutes  
Off  
Off  
Off  
Off  
Sample Customized Profile: (To get even better  
battery life keep the display and volume settings as  
low as possible and use the sample customized  
profile.)  
2 Minutes  
1 Minute  
1 Minute  
5 Minutes  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Advanced Features Submenu of the Power Menu  
The Advanced Features submenu is for setting some non-time related power saving parameters.  
PhoenixBIOS Setup Utility  
Power  
Advanced Features  
Item Specific Help  
Suspend/Resume Switch:  
[Enabled]  
Configures the  
Lid Closure Suspend:  
Lid Open Resume:  
Resume on LAN:  
[On]  
[On]  
[Off]  
Suspend/Resume switch.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 17. Advanced Features Submenu  
Table 17: Fields, Options and Defaults for the Advanced Features Submenu of the Power Menu  
Menu Field  
Options  
Default  
Description  
Suspend/  
Resume Switch:  
Disabled  
Enabled  
[Enabled]  
Sets the function of the Suspend/Resume button when your note-  
book is in an active state. The resume function can not be disabled  
as it works regardless of any other settings.  
Lid Closure  
Suspend:  
Off  
On  
[On]  
[On]  
[Off]  
Enables and disables having closure of the Display panel put your  
notebook in Suspend mode.  
Lid Open  
Resume:  
Off  
On  
Enables and disables having opening the Display panel acting as an  
automatic resume.  
Resume On  
LAN:  
Off  
On  
When this feature is set to On, the system will wake when the inter-  
nal LAN device receives a Magic Packet while in Suspend Mode.  
Exiting from Power Menu  
When you have finished setting the boot parameters with the Power menu, you can either exit from the setup utility or  
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish to  
move to another menu, use the cursor keys.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
B o o t M e n u  
BOOT MENU – SELECTING THE OPERATING SYSTEM SOURCE  
The Boot Menu is used to select the order in which the BIOS searches sources for the operating system. Follow the  
instructions for Navigating Through the Setup Utility to make any changes. The tables show the names of the menu  
fields for the Boot menu and its submenu, all of the options for each field, the default settings and a description of the  
field's function and any special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Item Specific Help  
Quick Boot:  
[Enabled]  
Boot Time Diagnostic Screen:  
[Disabled]  
[Disabled]  
All diagnostic tests  
will be done.  
Preboot Execution Environment  
Boot Device Priority  
[Disabled]  
[Enabled]  
Some diagnostic tests  
may be skipped while  
booting to speed up.  
[Auto]  
Diagnostic tests will  
be automatically  
skipped or done  
according to the order  
of the ACPI OS.  
F1 Help  
ESC Exit  
Select Item -/Space Change Values  
Select Menu  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 18. Boot Menu  
Table 18: Fields, Options and Defaults for the Boot Menu  
Menu Field  
Options  
Default  
Description  
QuickBoot  
Mode:  
Disabled  
Enabled  
Auto  
[Enabled]  
Turns on and off booting with a truncated set of Power On Self  
Test. (Fewer tests mean faster turn on.)  
Boot-time  
Diagnostic  
Screen:  
Disabled  
Enabled  
[Disabled]  
[Disabled]  
Turns on and off display of test results instead of Fujitsu logo  
screen during Power On Self Test.  
Preboot  
Execution  
Environment  
Disabled  
Enabled  
Turns off and on the preboot execution environment feature.  
Boot Device  
Priority  
Selects Boot  
Device Priority  
submenu  
This menu allows setting up the source for the operating  
system.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
Boot Device Priority Submenu of the Boot Menu  
The Boot Device Priority submenu is for setting the order of checking of sources for the operating system.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Boot Device Priority  
Item Specific Help  
The top device has the  
highest priority.  
Floppy Disk Drive  
+Hard Disk Drive  
ATAPI CD-ROM Drive  
<Enter> expands or  
collapses devices with  
a + or -.  
<Ctrl+Enter> expands  
all.  
< > or < > selects a  
device.  
<+>/<Space> or <->  
moves the device up or  
down.  
<Shift + 1> enables or  
disables a device.  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 19. Boot Device Priority Submenu  
Table 19: Fields, Options and Defaults for the Boot Device Priority Submenu of the Boot Menu  
Menu Field  
Options  
Description  
Floppy Disk  
Drive  
–—  
The boot selections determine the order in which the BIOS  
searches for the operating system during a startup sequence. To  
change the order highlight one source by using the [up] or  
[down] cursor keys and then press the [+] or [-] key to change  
the order number for that source. Be sure to save your changed  
order when you exit the BIOS setup utility.  
Hard Disk Drive  
TOSHIBA  
MHK3017GAP-(PM)  
Bootable Add-in Cards  
ATAPI CD-ROM  
Drive  
–—  
Exiting from Boot Menu  
When you have finished setting the boot parameters with the Boot menu, you can either exit from the setup utility or  
move to another menu. If you wish to exit from the setup utility press the [Esc] key to go to the Exit menu. If you wish to  
move to another menu, use the cursor keys.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I n f o M e n u  
INFO MENU - DISPLAYS BASIC SYSTEM INFORMATION  
The Info menu is a display-only screen that provides the  
configuration information for your notebook.  
P O I N T  
The information displayed on this screen is variable  
according to the unit you purchased.  
The following table shows the names of the menu fields  
for the Info menu and the information displayed in those  
fields. These fields are for information purposes only, and  
are not editable.  
PhoenixBIOS Setup Utility  
Security Power Savings  
Main  
Advanced  
Boot  
Info  
Item Specific Help  
BIOS Version:  
BIOS Date:  
1.03  
04/15/2002  
BIOS Area:  
E400h - FFFFh  
CPU Type:  
CPU Speed:  
L1 Cache:  
L2 Cache:  
Transmeta TM5800 processor  
867 MHz  
128 KB  
512 KB  
Total Memory:  
240 MB  
CMS Mode:  
CMS Revision:  
OEM ID:  
Normal  
4.3.0-9-197  
FJCFG-0104020100  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
Enter Select Sub-Menu  
F9 Setup Defaults  
F10 Save and Exit  
Figure 20. Info Menu  
Table 20: Fields, Options and Defaults for the Info Menu  
Menu Field  
BIOS Version:  
BIOS Date:  
BIOS Area:  
CPU Type:  
CPU Speed:  
L1 Cache:  
Default  
Menu Field  
Total Memory:  
CMS Mode:  
CMS Revision:  
OEM ID:  
Default  
1.xx  
*240 MB  
mm/dd/yyyy  
E400h – FFFFh  
Normal  
4.3.0-9-197  
FJCFG-0104020100  
Transmeta TM5800 processor  
867 MHz  
128 KB  
* Note that Transmeta CPU uses 16MB of RAM for Code  
Morphing Software (CMS). As a result, the amount reflected here  
reflects memory less the 16MB used by CMS. For more  
information on CMS, refer to the Transmeta web site at:  
L2 Cache:  
512 KB  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
L i f e B o o k  
P
S e r i e s B I O S  
EXIT MENU – LEAVING THE SETUP UTILITY  
The Exit Menu is used to leave the setup utility. Follow the instructions for Navigating Through The Setup Utility to  
make any changes. The table shows the names of the menu fields for the Exit menu and a description of the field's func-  
tion and any special information needed to help understand the field's use.  
PhoenixBIOS Setup Utility  
Main  
Advanced  
Security  
Power Savings  
Boot  
Exit  
Item Specific Help  
Exit Saving Changes  
Exit Discarding Changes  
Load Setup Defaults  
Discard Changes  
Exit System Setup and  
save your changes to  
CMOS.  
Save Changes  
F1 Help  
ESC Exit  
Select Item  
Select Menu  
-/Space Change Values  
F9 Setup Defaults  
F10 Save and Exit  
Enter Select  
Sub-Menu  
Figure 21. Exit Menu  
Table 21: Fields, Options and Defaults for the Exit Menu  
Menu Field  
Shortcut  
Description  
Exit Saving  
Changes  
Press the  
F10 key  
Exit Saving Changes and Exit will store all the entries on every menu of the setup utility  
to the BIOS memory and then exit the setup utility. A confirmation message Save  
Configuration changes and exit now? [Yes] [No] will be displayed.  
Exit  
Discarding  
Changes  
–—  
Selecting Exit Discarding Changes and Exit will exit the setup utility with out writing to  
the BIOS memory. When the BIOS recognizes this selection it will load the operating  
system and begin operation.  
Load Setup  
Defaults  
Press the  
F9 key  
Selecting Load Setup Defaults will load the factory preset default values for all menu  
fields, then display the message Load default configuration now? [Yes]  
[No]. When confirmed the setup utility will return to the Exit Menu. To return to  
another menu follow the directions in the Navigating Through The Setup Utility section.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
E x i t M e n u  
Table 21: Fields, Options and Defaults for the Exit Menu  
Menu Field  
Shortcut  
Description  
Discard  
Changes  
–—  
Selecting Discard Changes will load the previous values in BIOS memory for all menu  
fields. The message Load previous now? [Yes] [No] will be displayed. When  
confirmed the setup utility will return to the Exit menu. To return to another menu, fol-  
low the directions in the Navigating Through The Setup Utility section.  
Save  
Changes  
–—  
Selecting Save Changes will cause the new settings in all menus to be written to the  
BIOS memory. The message Save configuration changes now? [Yes]  
[No] will be displayed. When confirmed, the setup utility will return to the Exit menu.  
To return to another menu, follow the directions in the Navigating Through The Setup Util-  
ity section.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  

EchoStar Satellite TV System MT2 User Manual
Edirol Portable Speaker MA 5A User Manual
Eiki Projection Television EIP 3500 User Manual
Electro Voice Speaker System MTL 2 User Manual
Everpure Water System EV3112 81 User Manual
Fujitsu Power Supply MB39A104 User Manual
GE Camcorder PNRQ20F User Manual
Geemarc Telephone Jupiter 10 User Manual
GE Gas Grill ZGG300LCPSS User Manual
GE Refrigerator 162D3907P004 User Manual