AF3-151E
COLOR NEGATIVE FILMS
[ ]
CH
(A)
1. FEATURES AND USES
2. SPEED
[
]
FUJICOLOR SUPERIA X-TRA 400 CH is a daylight-
type ISO 400 color negative film that incorporates 4th
Color Layer and the newly developed Super Fine-∑
(Sigma) Grain Technology to achieve high image qual-
ity when printed on FUJICOLOR papers.
Light Source
Speed
Filter
Daylight
ISO 400/27°
None
Tungsten Lamps
(3200K)
LBB-12**
(or Wratten No.80A)
ISO 100/21°*
*
Indicates the effective speed resulting from designated filter use.
** Fuji Light Balancing Filter
Features
Results
• Excellent Grain
Quality
• Fine grain for a high-speed
film, providing no loss of
image quality even in
3. EXPOSURE GUIDE
large-size enlargements
Use an exposure meter for exposure determination. If a
meter is not available, refer to the following table.
• High Speed and
Wide Exposure
Latitude
• High sensitivity that allows
images to be captured
even under insufficient
light conditions
Daylight Exposure Guide Table
Seashore
or Snow
Cloudy
Day or
Open
Light
Conditions
Scenes Bright
under Sunlight Sunlight Bright
Bright
Sun
Hazy
Cloudy
• Vibrant,
• Vibrant and dynamic reds,
blues, and yellows
• Violets and a variety of
greens with enhanced
fidelity
Natural Color
Reproduction
Shade
Lens
f/22
f/16
1/500
f/16
f/11
1/250
f/8
Aperture
Shutter
Speed (sec.)
• Excellent
Skin Color
• Smooth, beautiful and
naturally depicted skin
tones
Reproduction
NOTES • The foregoing settings are for 2 hours after sunrise
and 2 hours before sunset.
• Excellent
Sharpness
• Extremely sharp depiction
of all aspects of the
• Provide lens openings 1/2-stop smaller during the
summer and 1/2-stop larger during the winter.
• Excessively bright (or dark) or backlighted subjects
may require plus or minus 1-stop lens opening ad-
justments.
subject, from overall form
to textural details
• Excellent Exposure • Accurate color reproduc-
Suitability even
under Fluorescent
Lighting
tion even under fluores-
cent lights
Low Light Exposure Guide Table
Nighttime
Fine
Indoor
Weather
• Excellent Gray
Balance
• Precisely maintained gray
balance throughout, from
the brightest highlights to
the deepest shadows
Light
Conditions
Scenes
(under
Fluorescent
Light)
Evening
Scenes
Night
Scenes
Daytime
Indoor
Scenes
Lens
f/2.8 to 4
1/60
f/2 to 2.8
1/30
f/2.8 to 4
1/60
f/2 to 2.8
1/30
Aperture
It requires no color-compensating filters when used
under daylight conditions or with an electronic flash.
Shutter
Speed (sec.)
NOTE
Since light intensities for indoor and night scenes vary
widely from location to location, the data above
should be used only as a guide.
– 1 –
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
FUJICOLOR SUPERIA X-TRA 400 CH • FUJIFILM PRODUCT INFORMATION BULLETIN
8. FILM STORAGE
7. FILM HANDLING
Unprocessed Film
• Expose film before the expiration date indicated on
the film package and process as soon as possible
after exposure.
• When loading and unloading roll film, avoid direct
sunlight. If there is no shade, turning one’s back to-
ward the sun will shade the film.
• Storing exposed or unexposed film under hot and
humid conditions may adversely affect speed, color
balance and physical property changes. Store film
under the following conditions.
Ï
Ordinary Storage: Protect from heat.
Long-term Storage: Below 0°C (32°F)
• Camera-loaded film should be exposed and pro-
cessed immediately.
Ï
• Building materials, finishes used on newly manufac-
tured furniture, paints and bonding agents may pro-
duce gases which affect photographic film. Do not
store film, lightproof boxes of film, loaded cameras or
film holders near these materials.
• Before use, allow films to stand at room-temperature
over 1 hour. Opening the package/box while film is
cold may cause harmful condensation.
• Unprocessed film should be kept away from X-rays
used to inspect checked-in baggage, etc. at airport
terminals. Strong X-rays can cause fogging of un-
processed film. It is recommended such film be
placed in your carry-on baggage whenever possible.
(Consult with airport personnel for details.)
• Film fogging may occur near X-ray equipment used
in hospitals, factories, laboratories and other loca-
tions. Always keep film away from possible sources
of radiation.
Processed Film
Exposure to light, high temperature and humid condi-
tions can cause color changes in processed films.
Therefore, place such films in sleeves and store them in
dark, dry, cool and well ventilated locations under the
following conditions.
Ï
General Storage:
Below 25°C (77°F) at 30% to 60% RH
Long-term Storage:
Below 10°C (50°F) at 30% to 50% RH
Ï
NOTE
As with all color dyes, those used in this film will dis-
color or fade with time.
9. SPECIFICATIONS AND PACKAGING
9-1 Specifications
Item
9-2 Edge Markings
Item
• Edge Stripe
One red solid line and one
green short broken line on one
side (changed)
• Code
CH
• Speed
• Type
ISO 400/27°
Daylight
• Type Designation
400
• Process
• Latent Image Bar Code
12-8
CN-16, CN-16Q, CN-16FA,
CN-16L, CN-16S or C-41
• FUJIFILM Identification
Code
• Size
135: 12-, 24- and 36-exp.
X01 and above
Negative Carrier
: 135B
0118
280
• Production Number
: 135C/D/J/K/S
– 3 –
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 CH
SUPERIA X-TRA 400
Production
Production
Type Designation
Identification Code
Number
Edge Stripe
(green and red)
Production
Identification Code
Latent Image Bar Code
9-3 Packaging
9-4 Post-Processing Masking Colors
The new SUPERIA X-TRA 400 has slight reddish tint in
comparison with the current SUPERIA X-TRA 400.
Item
• Box
New Design
Identification Color: Blue (unchanged)
Design
• Cartridge
(unchanged)
Identification Color: Blue
10. TECHNOLOGIES INCORPORATED
IN NEW SUPERIA X-TRA 400
11. PROCESSING
This film is intended for processing by Fujifilm Pro-
cesses CN-16, CN-16Q, CN-16FA, CN-16L, CN-16S or
Process C-41.
10-1 Super Fine-Σ (Sigma) Grain Technology
• By incorporating the Super Fine-Σ (Sigma) grain, a
further advance over the Fine-Σ (Sigma) grain intro-
duced in SUPERIA X-TRA 800 film, this film realizes
very high level of grain quality among ISO 400-class
films.
11-1 Replenishment Rate
The following table shows the replenishment rates for
each type of Fujifilm Processes.
• To achieve the high sensitivity and small volume of
the Super Fine-Σ (Sigma) grain, uniform, thin-crystal
technology was used to produce crystals with ap-
proximately half the thickness of the hexagonal crys-
tals used in the current SUPERIA X-TRA 400. The
higher uniformity in size and improved light-collection
efficiency of these grains have made possible a film
with higher sensitivity than that of the current
SUPERIA X-TRA 400 and extremely smooth grain
quality, regardless of the film’s high speed.
CN-16Q
CN-16FA
Processing Replenish-
Processing Replenish-
Solution
ment Rate*
Solution
ment Rate*
NQ1-R
NQ2-R
NQ3-R
NQS
43
20
30
30
20
N1-R
N2-R
N3-R
NS
22
5
16
34
20
NQ4-R
N4-R
10-2 Super Efficient Coupler Technology
The use of new couplers has enhanced color develop-
ment efficiency.
CN-16L
CN-16S
Processing Replenish-
Replenish-
ment Rate*
Processing
Solution
Solution
ment Rate*
N1-R
N2-R
N3-R
N4-R
15
5
20
5
N1-R
N2-R
N3-R
NS
7.5
30
8
17
15
N4-R
*Replenishment Rate ...... Replenisher volume (mL) per single roll
(135/24 exp.)
– 4 –
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
FUJICOLOR SUPERIA X-TRA 400 CH • FUJIFILM PRODUCT INFORMATION BULLETIN
4-2 Processing Solution Control
Use the current 135-size control strips for processing
solution control.
13. JUDGING EXPOSURE RESULTS
SUPERIA X-TRA 400 exposure results can be accurately
predicted by using an electronic densitometer equipped
with Status M filters. An 18% gray card, receiving the
same illumination as the subject, when read through the
RED filter should render density readings between 0.75
and 0.95 (for exposures under recommended lighting
and with optimal film processing).
4-3 Processing-Photographic Characteristics
Same as those for SUPERIA 400.
12. PRINTER CONDITIONS
This film can be printed on the same printer setup with
results similar to the current film. However, depending
on the printer type, a slight blue cast might appear in the
overexposed areas. If this occurs, adjustment of printer
conditions may be necessary.
14. FILM STRUCTURE
15. DIFFUSE RMS GRANULARITY VALUE .............. 4
Micro-densitometer Measurement Aperture: 48 µm in diameter
Magnification: 12 ×
Sample Density: 1.0 above minimum density
16. RESOLVING POWER
Chart Contrast
1.6 : 1 .......................... 50 lines/mm
Chart Contrast 1000 : 1 ........................ 125 lines/mm
– 5 –
Download from Www.Somanuals.com. All Manuals Search And Download.
[
]
FUJIFILM PRODUCT INFORMATION BULLETIN • FUJICOLOR SUPERIA X-TRA 400 CH
17. CHARACTERISTIC CURVES
18. SPECTRAL SENSITIVITY CURVES
4.0
Process
Densitometry : Status M
Density : 1.0 above D-min.
: CN-16
Exposure
3.5 Process
: Daylight, 1/125 sec.
: CN-16
Densitometry : Status M
3.0
2.5
2.0
1.5
Green
Sensitive
Layer
Blue
Sensitive
Layer
Red
Sensitive
Layer
Blue
Cyan
Sesitive
Layer
Green
Red
1.0
0.5
0.0
400
500
Wavelength (nm)
700
600
–4.0
–3.0
–2.0
0.0
–1.0
Exposure [log H (lux-seconds)]
* Sensitivity equals the reciprocal of the exposure
(J/cm²) required to produce a specified density.
20. SPECTRAL DYE DENSITY CURVES
19. MTF CURVE
150
Typical densities for a mid-scale
neutral subject and for D-mini.
100
70
2.0
50
Mid-scale Density
30
20
Exposure : Daylight
Process : CN-16
10
1.0
Minimum Density
7
5
3
2
0.0
400
500
600
700
5
10
20
50 100
200
1
Spatial Frequency (cycles/mm)
Wavelength (nm)
NOTICE The data herein published were derived from materials taken from
general production runs. However, as Fujifilm is constantly upgrading the quality
of its products, changes in specifications may occur without prior notice.
– 6 –
FUJI PHOTO FILM CO., LTD.
26-30, Nishiazabu 2-chome, Minato-ku, Tokyo 106-8620, Japan
Ref. No. AF3-151E (EIGI-03.2-HB•4-1 ) Printed in Japan
!
Download from Www.Somanuals.com. All Manuals Search And Download.
|