FujiFilm Digital Camera 16243252 User Manual

BL01704-200  
EN  
DIGITAL CAMERA  
Before You Begin  
First Steps  
FINEPIX HS25EXR  
FINEPIX HS28EXR  
Owner’s Manual  
Thank you for your purchase of this  
product. This manual describes how  
to use your FUJIFILM digital camera and  
the supplied software. Be sure that you  
have read and understood its contents  
and the warnings in “For Your Safety”  
(Pii) before using the camera.  
Basic Photography and Playback  
More on Photography  
More on Playback  
Movies  
Connections  
Menus  
For information on related products, visit our website at  
http://www.fujifilm.com/products/digital_cameras/index.html  
Technical Notes  
Troubleshooting  
Appendix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
Power Lines: An outside antenna sys-  
tem should not be located in the  
vicinity of overhead power lines or  
other electric light or power circuits,  
or where it can fall into such power  
lines or circuits. When installing an  
outside antenna system, extreme  
care should be taken to keep from  
touching such power lines or circuits  
as contact with them might be fatal.  
Replacement Parts: When replace-  
ment parts are required, be sure  
the service technician has used  
replacement parts specified by the  
manufacturer or have the same  
characteristics as the original part.  
Unauthorized substitutions may  
result in fire, electric shock or other  
hazards.  
Use  
Service  
Cleaning: Unplug this video product Servicing: Do not attempt to service  
from the wall outlet before clean- this video product yourself as open-  
ing. Do not use liquid cleaners or ing or removing covers may expose  
aerosol cleaners. Use a damp cloth you to dangerous voltage or other  
for cleaning.  
hazards. Refer all servicing to quali-  
fied service personnel.  
Object and Liquid Entry: Never push  
objects of any kind into this video Damage Requiring Service: Unplug this  
product through openings as they video product from the wall outlet  
may touch dangerous voltage and refer servicing to qualified ser-  
points or short out parts that could vice personnel under the following  
result in a fire or electric shock. Never conditions:  
Safety Check: Upon completion of any  
service or repairs to this video prod-  
uct, ask the service technician to  
perform safety checks to determine  
that the video product is in proper  
operating condition.  
EXAMPLE OF ANTENNA GROUNDING  
AS PER NATIONAL ELECTRICAL CODE  
spill liquid of any kind on the video When the power-supply cord or  
product.  
Ground Clamp  
Antenna  
plug is damaged.  
Lead in Wire  
If liquid has been spilled, or objects  
have fallen into the video product.  
If the video product has been ex-  
posed to rain or water.  
If the video product has been  
dropped or the cabinet has been  
damaged.  
If the video product does not op-  
erate normally be following the  
operating instructions. Adjust only  
those controls that are covered by  
the operating instructions as an im-  
proper adjustment of other controls  
may result in damage and will often  
require extensive work by a qualified  
technician to restore the video prod-  
uct to its normal operation.  
Lightning: For added protection for  
this video product receiver during  
a lightning storm, or when it is left  
unattended and unused for long pe-  
Electric  
Service  
Equipment  
Antenna  
Discharge Unit riods of time, unplug it from the wall  
(NEC SECTION  
810-20)  
Grounding  
Conductors  
(NEC SECTION  
810-21)  
Ground  
Clamps  
outlet and disconnect the antenna  
or cable system. This will prevent  
damage to the video product due  
to lightning and power-line surges.  
Power Service  
Grounding Electrode  
System (NEC ART 250.  
PART H)  
When the video product exhibits a  
distinct change in performance - this  
indicates a need for service.  
iii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
Be sure to read this notes before using  
Safety Notes  
WARNING  
Do not allow water or foreign objects to enter the camera.  
If water or foreign objects get inside the camera, turn the camera  
off, remove the battery and disconnect and unplug the AC power  
adapter.  
• Make sure that you use your camera correctly. Read these Safety Notes and  
your Owner’s Manual carefully before use.  
Avoid  
exposure to  
water  
Continued use of the camera can cause a fire or electric shock.  
• Contact your FUJIFILM dealer.  
• After reading these Safety Notes, store them in a safe place.  
About the Icons  
Do not use the camera in the bathroom or shower.  
This can cause a fire or electric shock.  
The icons shown below are used in this document to indicate the severity of  
the injury or damage that can result if the information indicated by the icon  
is ignored and the product is used incorrectly as a result.  
Do not use in  
the bathroom  
or shower.  
Never attempt to disassemble or modify (never open the case).  
Failure to observe this precaution can cause fire or electric shock.  
This icon indicates that death or serious injury can result if the infor-  
mation is ignored.  
Do not disas-  
semble  
WARNING  
Should the case break open as the result of a fall or other accident, do not touch  
the exposed parts.  
Failure to observe this precaution could result in electric shock or in  
injury from touching the damaged parts. Remove the battery im-  
mediately, taking care to avoid injury or electric shock, and take the  
product to the point of purchase for consultation.  
This icon indicates that personal injury or material damage can result  
if the information is ignored.  
CAUTION  
Do not touch  
internal  
parts  
The icons shown below are used to indicate the nature of the information  
which is to be observed.  
Triangular icons tell you that this information requires attention (“im-  
portant”).  
Do not change, heat or unduly twist or pull the connection cord and do not  
place heavy objects on the connection cord.  
These actions could damage the cord and cause a fire or electric  
shock.  
• If the cord is damaged, contact your FUJIFILM dealer.  
Circular icons with a diagonal bar tell you that the action indicated is  
prohibited (“Prohibited”).  
Filled circles with an exclamation mark tell you an action that must be  
performed (“Required”).  
Do not place the camera on an unstable surface.  
This can cause the camera to fall or tip over and cause injury.  
Never attempt to take pictures while in motion.  
Do not use the camera while you are walking or driving a vehicle. This  
can result in you falling down or being involved in a traffic accident.  
Do not touch any metal parts of the camera during a thunderstorm.  
This can cause an electric shock due to induced current from the  
lightning discharge.  
WARNING  
If a problem arises, turn the camera off, remove the battery, disconnect and  
unplug the AC power adapter.  
Continued use of the camera when it is emitting smoke, is emitting  
any unusual odor, or is in any other abnormal state can cause a fire  
Unplug  
from power  
socket.  
or electric shock.  
Do not use the battery except as specified.  
Load the battery as aligned with the indicator.  
• Contact your FUJIFILM dealer.  
iv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
WARNING  
CAUTION  
Do not heat, change or take apart the battery. Do not drop or subject the bat-  
tery to impacts. Do not store the battery with metallic products. Do not use  
chargers other than the specified model to charge the battery.  
Any of these actions can cause the battery to burst or leak and cause  
fire or injury as a result.  
Keep out of the reach of small children.  
This product could cause injury in the hands of a child.  
Do not place heavy objects on the camera.  
This can cause the heavy object to tip over or fall and cause injury.  
Do not move the camera while the AC power adapter is still connected. Do not  
pull on the connection cord to disconnect the AC power adapter.  
This can damage the power cord or cables and cause a fire or electric  
shock.  
Do not use the AC power adapter when the plug is damaged or the plug socket  
connection is loose.  
Use only the battery or AC power adapters specified for use with this camera.  
Do not use voltages other than the power supply voltage shown.  
The use of other power sources can cause a fire.  
If the battery leaks and fluid gets in contact with your eyes, skin or clothing.  
Flush the affected area with clean water and seek medical attention or call an  
emergency number right away.  
This could cause a fire or electric shock.  
Do not use the charger to charge batteries other than those specified here.  
The Ni-MH battery charger is designed for FUJIFILM HR-AA Ni-MH  
batteries. Using the charger to charge conventional batteries or other  
types of rechargeable batteries can cause the battery to leak fluid,  
overheat or burst.  
Do not cover or wrap the camera or the AC power adapter in a cloth or blanket.  
This can cause heat to build up and distort the casing or cause a fire.  
When you are cleaning the camera or you do not plan to use the camera for  
an extended period, remove the battery and disconnect and unplug the AC  
power adapter.  
Danger of explosion if battery is incorrectly replaced. Replace only with the  
same or equivalent type.  
Failure to do so can cause a fire or electric shock.  
When charging ends, unplug the charger from the power socket.  
Leaving the charger plugged into the power socket can cause a fire.  
Do not use in the presence of flammable objects, explosive gases, or dust.  
Using a flash too close to a person’s eyes may temporarily affect the eyesight.  
Take particular care when photographing infants and young children.  
When carrying the battery, install it in a digital camera or keep it in the hard  
case. When storing the battery, keep it in the hard case. When discarding,  
cover the battery terminals with insulation tape.  
Contact with other metallic objects or battery could cause the bat-  
tery to ignite or burst.  
When a memory card is removed, the card could come out of the slot too quick-  
ly. Use your finger to hold it and gently release the card.  
Request regular internal testing and cleaning for your camera.  
Build-up of dust in your camera can cause a fire or electric shock.  
• Contact your FUJIFILM dealer to request internal cleaning every 2  
years.  
Keep Memory Cards out of the reach of small children.  
Because Memory Cards are small, they can be swallowed by children.  
Be sure to store Memory Cards out of the reach of small children. If  
a child swallows a Memory Card, seek medical attention or call an  
emergency number.  
• Please note this is not a free of charge service.  
Remove your fingers from the flash window before the flash fires.  
Failure to observe this precaution could result in burns.  
Keep the flash window clean and do not use the flash if the window is ob-  
structed.  
Failure to observe these precautions could cause smoke or discolor-  
ation.  
CAUTION  
Do not use this camera in locations affected by oil fumes, steam, humidity or dust.  
This can cause a fire or electric shock.  
Do not leave this camera in places subject to extremely high temperatures.  
Do not leave the camera in locations such as a sealed vehicle or in  
direct sunlight. This can cause a fire.  
v
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
If you are using a heating pad, take  
care not to place the battery di-  
rectly against the pad. The camera  
may not operate if you use a de-  
pleted battery in cold conditions.  
• Dispose of used battery promptly.  
• Do not drop the battery or other-  
wise subject it to strong impacts.  
• Do not expose the battery to wa-  
ter.  
Battery Life  
Power Supply and Battery  
At normal temperatures, the bat-  
tery can be used at least 300 times.  
If the time for which the battery  
provides power shortens markedly,  
this indicates that the battery has  
reached the end of its effective life  
and should be replaced.  
* Confirm your battery type before read-  
ing the following descriptions.  
The following explains proper use of  
batteries and how to prolong their  
• Always keep the battery terminals  
clean.  
life. Incorrect use of batteries can Charging the Battery  
cause shorter battery life, as well as • You can charge the battery using  
• Do not store batteries in hot plac-  
es. Also, if you use the battery for  
a long period, the camera body  
and the battery itself will become  
warm. This is normal. Use the AC  
power adapter if you are taking  
pictures or viewing images for a  
long period of time.  
leakage, excessive heat, fire or explo-  
sion.  
the battery charger (included).  
- The battery can be charged  
at ambient temperatures be-  
tween 0°C and +40°C (+32°F  
and +104°F). Refer to the Owner’s  
Manual for the time of charging  
battery.  
- You should charge the battery  
at an ambient temperature be-  
tween +10°C and +35°C (+50°F  
and +95°F). If you charge the  
battery at a temperature outside  
this range, charging takes longer  
because the performance of the  
battery is impaired.  
- You cannot charge the battery  
at temperatures of 0°C (+32°F) or  
below.  
• The Rechargeable Lithium-ion Bat-  
tery does not need to be fully dis-  
charged or exhausted flat before  
being charged.  
Notes on storage  
• If  
a
battery is stored for long  
Camera uses the Rechargeable  
Lithium-ion Battery  
1
periods while charged, the per-  
formance of the battery can be  
impaired. If the battery will not be  
used for some time, run the battery  
out before storing it.  
• If you do not intend to use the  
camera for a long period of time,  
remove the battery from the cam-  
era.  
• Store the battery in a cool place.  
- The battery should be stored in  
a dry location with an ambient  
temperature between +15°C and  
+25°C (+59°F and +77°F).  
* When shipped, the battery is not  
fully charged. Always charge the  
battery before using it.  
* When carrying the battery, install it  
in a digital camera or keep it in the  
soft case.  
Camera uses AA-size alkaline or Ni-MH  
(nickel-metal hydride) rechargeable  
batteries  
2
Battery Features  
* For details on the batteries that  
you can use, refer to the Owner’s  
Manual of your camera.  
• The battery gradually loses its  
charge even when not used. Use  
a battery that has been charged  
recently (in the last day or two) to  
take pictures.  
Cautions for Using Battery  
• Do not heat the batteries or throw  
them into a fire.  
• Do not carry or store batteries with  
metal objects such as necklaces or  
hairpins.  
• Do not expose the batteries to  
water, and keep batteries from get-  
ting wet or stored in moist loca-  
tions.  
• Do not attempt to take apart or  
change the batteries, including  
battery casings.  
- Do not leave the battery in hot or  
extremely cold places.  
• To maximize the life of the battery,  
turn the camera off as quickly as  
possible when it is not being used.  
• The number of available frames  
will be lower in cold locations or  
at low temperatures. Take along  
a spare fully charged battery. You  
can also increase the amount of  
power produced by putting the  
battery in your pocket or another  
warm place to heat it and then  
loading it into the camera just be-  
fore you take a picture.  
Handling the Battery  
Cautions for Your Safety:  
• Do not carry or store battery with  
metal objects such as necklaces or  
hairpins.  
• Do not heat the battery or throw it  
into a fire.  
• Do not attempt to take apart or  
change the battery.  
• Do not recharge the battery with  
chargers other those specified.  
• The battery may feel warm after it  
has been charged or immediately  
after being used. This is perfectly  
normal.  
• Do not recharge a fully charged  
battery.  
• Do not subject the batteries to  
strong impacts.  
vi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
• Do not use batteries that are leak-  
ing, deformed, discolored.  
• Do not store batteries in warm or  
humid places.  
• Keep the batteries out of reach of  
babies and small children.  
• Make sure that the battery polarity  
(Cand D) is correct.  
• Do not use new with used batter-  
ies. Do not use charged and dis-  
charged batteries together.  
• Do not use different types or  
brands of batteries at the same  
time.  
• If you do not intend to use the  
camera for a long period of time,  
remove the batteries from the  
camera. Note if the camera is left  
with the batteries removed, the  
time and date settings are cleared.  
• The batteries feel warm right after  
being used. Before removing the  
batteries, turn the camera off and  
wait for the batteries to cool down.  
• Since batteries do not work well in  
cold weather or locations, warm  
the batteries by placing them in-  
side your garments before use.  
Batteries do not work well when  
cold. They will work again when  
the temperature returns to normal.  
• Soil (such as fingerprints) on the  
battery terminals makes the bat-  
teries charge less reducing the  
number of images. Carefully wipe  
the battery terminals with a soft  
dry cloth before loading.  
If any liquid at all leaks from  
the batteries, wipe the battery  
compartment thoroughly and  
then load new batteries.  
• Ni-MH batteries have  
a
limited  
CAUTION  
service life. If a battery can only  
be used for a short time even after  
repeated discharge-charge cycles,  
it may have reached the end of its  
service life.  
Do not use the “Discharging re-  
chargeable batteries” function when  
alkaline batteries being used.  
• To charge Ni-MH batteries, use the  
quick battery charger (sold sepa-  
rately). Refer to the instructions  
supplied with the charger to make  
sure that the charger is used cor-  
rectly.  
If any battery fluid comes into  
contact with your hands or  
clothing, flush the area thor-  
oughly with water. Note that  
battery fluid can cause loss  
of eyesight if it gets into your  
eyes. If this occurs, do not rub  
your eyes. Flush the fluid out  
with clean water and contact  
your physician for treatment.  
Disposing of Batteries  
• When disposing of batteries, do  
so in accordance with your local  
waste disposal regulations.  
• Do not use the battery charger to  
charge other batteries.  
• Note that the batteries feel warm  
after being charged.  
Notes on both models (  
,
)
3
1
2
AC Power Adapter  
Always use the AC Power Adapter  
with the camera. The use of an AC  
Power adapter other than FUJIFILM  
AC Power Adapter can be damaged  
to your digital camera.  
For details on the AC power adapter,  
refer to the Owner’s Manual of your  
camera.  
• Due to the way the camera is con-  
structed, a small amount of current  
is used even when the camera is  
turned off. Note in particular that  
leaving Ni-MH batteries in the  
camera for a long period will over-  
discharge the batteries and may  
render them unusable even after  
recharging.  
• Ni-MH batteries will self-discharge  
even when not used, and the time  
for which they can be used may be  
shortened as a result.  
• Ni-MH batteries will deteriorate  
rapidly if over-discharged (e.g.  
by discharging the batteries in a  
flashlight). Use the “Discharging re-  
chargeable batteries” function pro-  
vided in the camera to discharge  
the batteries.  
Using the AA-size Ni-MH batteries  
correctly  
• Ni-MH batteries left unused in  
storage for long periods can be-  
come “deactivated”. Also, repeat-  
edly charging Ni-MH batteries  
that are only partially discharged  
can cause them to suffer from the  
“memory effect”. Ni-MH batteries  
that are “deactivated” or affected  
by “memory” suffer from the prob-  
lem of only providing power for a  
short time after being charged. To  
prevent this problem, discharge  
and recharge them several times  
using the camera’s “Discharging  
rechargeable batteries” function.  
Deactivation and memory are spe-  
cific to Ni-MH batteries and are not  
in fact battery faults.  
• Use the AC power adapter for in-  
door use only.  
• Plug the connection cord plug se-  
curely into the DC input terminal.  
• Turn off the FUJIFILM Digital cam-  
era before disconnecting the cord  
from the DC input terminal. To dis-  
connect, pull out the plug gently.  
Do not pull on the cord.  
• Do not use the AC power adapter  
with any device other than your  
camera.  
• During use, the AC power adapter  
will become hot to the touch. This  
is normal.  
See Owner’s Manual for the proce-  
dure for “Discharging rechargeable  
batteries”.  
vii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
• Do not take apart the AC power unless intended only for personal Although the LCD panel is produced  
adapter. Doing so could be dan- use. Note that some restrictions ap- with highly sophisticated technolo-  
Explanation of Color Television  
System  
NTSC: National Television System  
Committee, color television  
gerous.  
• Do not use the AC power adapter performances, entertainments and permanently lit spots. This is not a  
in a hot and humid place. exhibits, even when intended purely malfunction, and does not affect re-  
• Do not subject the AC power for personal use. Users are also asked corded images.  
adapter to strong shocks. to note that the transfer of Memory  
• The AC power adapter may emit a Card containing images or data pro-  
ply to the photographing of stage gies, there may be black spots or  
telecasting  
specifications  
adopted mainly in the U.S.A.,  
Canada and Japan.  
Trademark Information  
xD-Picture Card and Eare trade- PAL: Phase Alternation by Line, a  
humming. This is normal.  
• If used near a radio, the AC power permissible within the restrictions  
adapter may cause static. If this imposed by those copyright laws.  
happens, move the camera away  
from the radio.  
tected under copyright laws is only  
marks of FUJIFILM Corporation. The  
typefaces included herein are solely  
developed by DynaComware Tai-  
wan Inc. Macintosh, QuickTime, and  
color television system ad-  
opted mainly by European  
countries and China.  
Handling Your Digital Camera  
Exif Print (Exif ver. 2.3)  
To ensure that images are recorded Mac OS are trademarks of Apple Inc.  
correctly, do not subject the camera in the U.S.A. and other countries.  
to impact or shock while an image is Windows 7, Windows Vista, and the  
Exif Print Format is a newly revised  
digital camera file format that con-  
tains a variety of shooting informa-  
tion for optimal printing.  
Before Using the Camera  
Do not aim the camera at extremely  
bright light sources, such as the sun  
in a cloudless sky. Failure to observe  
this precaution could damage the  
camera image sensor.  
being recorded.  
Windows logo are trademarks of  
the Microsoft group of companies.  
Adobe and Adobe Reader are either  
trademarks or registered trademarks  
of Adobe Systems Incorporated in  
the U.S.A. and/or other countries.  
The SDHC and SDXC logos are trade-  
marks of SD-3C, LLC. The HDMI logo  
is a trademark. YouTube is a trade-  
mark of Google Inc. All other trade  
names mentioned in this manual are  
the trademarks or registered trade-  
marks of their respective owners.  
Liquid Crystal  
If the LCD monitor is damaged, take  
particular care with the liquid crystal  
in the monitor. If any of the follow-  
ing situations arise, take the urgent  
action indicated.  
IMPORTANT NOTICE: Read Before  
Using the Software  
Direct or indirect export, in whole or  
in part, of licensed software without  
the permission of the applicable  
governing bodies is prohibited.  
Test Shots Prior to Photography  
For important photographs (such as  
weddings and overseas trips), always  
take a test shot and view the im-  
age to make sure that the camera is  
working normally.  
• FUJIFILM Corporation cannot ac-  
cept liability for any incidental  
losses (such as the costs of photog-  
raphy or the loss of income from  
photography) incurred as a result  
of faults with this product.  
• If liquid crystal comes in contact  
with your skin:  
Wipe the area with  
a
cloth and  
then wash thoroughly with soap  
and running water.  
• If liquid crystal gets into your eye:  
Flush the affected eye with clean Notes on Electrical Interference  
water for at least 15 minutes and If the camera is to be used in hos-  
then seek medical assistance.  
• If liquid crystal is swallowed:  
pitals or aircrafts, please note that  
this camera may cause interference  
Flush your mouth thoroughly with to other equipment in the hospital  
water. Drink large quantities of wa- or aircraft. For details, please check  
ter and induce vomiting. Then seek with the applicable regulations.  
medical assistance.  
Notes on Copyright  
Images recorded using your digital  
camera system cannot be used in  
ways that infringe copyright laws  
without the consent of the owner,  
viii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Your Safety  
• You are cautioned that any changes or modifications In Countries Outside the European Union, Norway, Iceland and  
not expressly approved in this manual could void the Liechtenstein: If you wish to discard this product, includ-  
NOTICCEES  
To prevent fire or shock hazard, do not expose the unit  
to rain or moisture.  
user’s authority to operate the equipment.  
ing the batteries or accumulators, please contact your  
local authorities and ask for the correct way of disposal.  
Notes on the Grant: To comply with Part 15 of the FCC  
Rules, this product must be used with a Fujifilm-spec-  
ified ferrite-core A/V cable, USB cable, and DC supply  
cord.  
Please read the “Safety Notes” and make sure you un-  
derstand them before using the camera.  
Perchlorate Material—special handling may apply. See  
http://www.dtsc.ca.gov/hazardouswaste/perchlorate.  
For Customers in Canada  
For Customers in the U. S. A.  
Tested To Comply With FCC Standards  
FOR HOME OR OFFICE USE  
CAUTION: This Class B digital apparatus complies with  
Canadian ICES-003.  
Disposall of Electrical and Electronic Equipment in Private  
Houseeholds  
FCC Statement: This device complies with Part 15 of the  
FCC Rules. Operation is subject to the following two  
conditions: (1) This device may not cause harmful in-  
terference, and (2) this device must accept any interfer-  
ence received, including interference that may cause  
undesired operation.  
In the European Union, Norway, Iceland and Liech-  
tenstein: This symbol on the product, or in  
the manual and in the warranty, and/or on  
its packaging indicates that this product  
shall not be treated as household waste.  
Instead it should be taken to an applicable  
collection point for the recycling of electri-  
cal and electronic equipment.  
CAUTION: This equipment has been tested and found  
to comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against  
harmful interference in a residential installation. This  
equipment generates, uses, and can radiate radio  
frequency energy and, if not installed and used in ac-  
cordance with the instructions, may cause harmful  
interference to radio communications. However, there  
is no guarantee that interference will not occur in a  
particular installation. If this equipment does cause  
harmful interference to radio or television reception,  
which can be determined by turning the equipment  
off and on, the user is encouraged to try to correct the  
interference by one or more of the following measures:  
• Reorient or relocate the receiving antenna.  
By ensuring this product is disposed of correctly, you  
will help prevent potential negative consequences to  
the environment and human health, which could oth-  
erwise be caused by inappropriate waste handling of  
this product.  
This symbol on the batteries or accumula-  
tors indicates that those batteries shall not  
be treated as household waste.  
If your equipment contains easy removable batteries or  
accumulators please dispose these separately accord-  
ing to your local requirements.  
• Increase the separation between the equipment and  
receiver.  
• Connect the equipment into an outlet on a circuit dif-  
ferent from that to which the receiver is connected.  
• Consult the dealer or an experienced radio/TV techni-  
cian for help.  
The recycling of materials will help to conserve natural  
resources. For more detailed information about recy-  
cling this product, please contact your local city office,  
your household waste disposal service or the shop  
where you purchased the product.  
ix  
Download from Www.Somanuals.com. All Manuals Search And Download.  
About This Manual  
Before using the camera, read this manual and the warnings on pages ii–ix. For information on specific  
topics, consult the sources below.  
Table of Contents .............................................. Pxi Troubleshooting ............................................ P110  
The “Table of Contents” gives an overview of the Having a specific problem with the camera?  
entire manual. The principal camera operations Find the answer here.  
are listed here.  
Warning Messaaggeess aanndd DDiissppllaayyss ..................... P116  
Find out what’s behind that flashing icon or error  
message in the display.  
Memory Cards  
Pictures can be stored in the camera’s internal memory or on optional SD, SDHC, and SDXC memory cards (P14),  
referred to in this manual as “memory cards”.  
x
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
For Your Safety ................................................................................. ii  
IMPORTANT SAFETY INSTRUCTIONS...................................... ii  
Safety Notes.................................................................................... iv  
About This Manual.......................................................................... x  
Mooree on PPhotography  
Shooting Mode...............................................................................22  
O(E AUTO/E Priority) ..................................23  
BAUTO ..........................................................................................24  
Adv. ADVANCED...........................................................................24  
SP1/SP2: SCENE POSITION.......................................................28  
r MOTION PANORAMA 360.................................................30  
P: PROGRAM AE............................................................................32  
S: SHUTTER PRIORITY AE...........................................................33  
A: APERTURE PRIORITY AE........................................................33  
M: MANUAL ....................................................................................34  
C: CUSTOM MODE........................................................................35  
Focus Lock.........................................................................................36  
The AE/AF LOCK Button.....................................................................37  
Locking Exposure......................................................................37  
Locking Focus.............................................................................37  
FMacro and Super Macro Modes (Close-ups)................38  
NUsing the Flash (Super-Intelligent Flash).......................39  
JUsing the Self-Timer...............................................................41  
I Continuous Shooting (Burst Mode)................................42  
dExposure Compensation.....................................................46  
Metering ............................................................................................47  
Focus Mode ......................................................................................48  
Autofocus Mode.............................................................................50  
Sensitivity .........................................................................................51  
White Balance..................................................................................52  
The Fn Button..................................................................................53  
bIntelligent Face Detection..................................................54  
Beffoore Yoou Beggin  
Introduction....................................................................................... 1  
Symbols and Conventions.......................................................... 1  
Supplied Accessories.................................................................... 1  
Parts of the Camera....................................................................... 2  
Camera Displays .......................................................................... 5  
First SSteps  
Attaching Accessories ................................................................... 8  
The Strap......................................................................................... 8  
The Lens Cap................................................................................. 8  
Inserting the Batteries .................................................................. 9  
Inserting a Memory Card ...........................................................12  
Turning the Camera on and Off ..............................................15  
Basic Setup .......................................................................................16  
Basic Photoggrraphy annd Pllayybbaacckk  
Taking Pictures in R (E AUTO) Mode......................17  
Viewing Pictures ............................................................................21  
xi  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
nFace Recognition ....................................................................55  
Adding New Faces .......................................................................55  
Viewing, Editing, and Deleting Existing Data ...................56  
Adding Faces Automatically ....................................................56  
Movies  
Recording Movies..........................................................................67  
Movie Frame Size .........................................................................68  
aViewing Movies........................................................................69  
More on Pllayback  
Connecctions  
Playback Options...........................................................................58  
Continuous Shooting .................................................................58  
IFavorites: Rating Pictures ....................................................58  
Playback Zoom..............................................................................59  
Multi-Frame Playback.................................................................60  
ADeleting Pictures ....................................................................61  
Viewing Photo Information ......................................................62  
Image Search...................................................................................63  
XPhotoBook Assist ...................................................................64  
Creating a PhotoBook ................................................................64  
Viewing PhotoBooks ..................................................................65  
Editing and Deleting PhotoBooks.........................................65  
Viewing Panoramas......................................................................66  
Viewing Pictures on TV...............................................................70  
Printing Pictures via USB............................................................72  
Connecting the Camera ............................................................72  
Printing Selected Pictures ........................................................72  
Printing the DPOF Print Order.................................................73  
Creating a DPOF Print Order....................................................75  
Viewing Pictures on a Computer............................................78  
Windows: Installing MyFinePix Studio.................................78  
Macintosh: Installing FinePixViewer.....................................80  
Connecting the Camera ............................................................82  
xii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
Using the Menus: Playback Mode..........................................91  
Using the Playback Menu..........................................................91  
Playback Menu Options.............................................................91  
XPHOTOBOOK ASSIST............................................................91  
xERASE.........................................................................................91  
jMARK FOR UPLOAD TO .......................................................92  
ISLIDE SHOW ............................................................................93  
BRED EYE REMOVAL................................................................93  
DPROTECT...................................................................................94  
GCROP ..........................................................................................94  
ORESIZE ........................................................................................95  
CIMAGE ROTATE........................................................................95  
ECOPY...........................................................................................96  
FVOICE MEMO...........................................................................96  
nERASE FACE RECOG. ............................................................97  
KPRINT ORDER (DPOF)...........................................................97  
JDISP. ASPECT ...........................................................................97  
The Setup Menu.............................................................................98  
Using the Setup Menu................................................................98  
Setup Menu Options...................................................................99  
F DATE/TIME ...............................................................................99  
N TIME DIFFERENCE..................................................................99  
L a.................................................................................99  
oSILENT MODE..........................................................................99  
R RESET ...................................................................................... 100  
K FORMAT ................................................................................. 100  
A IMAGE DISP. ......................................................................... 100  
B FRAME NO. ............................................................................101  
G OPERATION VOL. ................................................................101  
Menus  
Using the Menus: Shooting Mode .........................................84  
Using the Shooting Menu.........................................................84  
Shooting Menu Options............................................................84  
AE MODE ..........................................................................84  
AAdv. MODE..............................................................................84  
A
SCENE POSITION.....................................................................84  
NISO...............................................................................................84  
OIMAGE SIZE...............................................................................85  
TIMAGE QUALITY.....................................................................85  
UDYNAMIC RANGE ..................................................................86  
PFILM SIMULATION.................................................................86  
dWB SHIFT ..................................................................................87  
fCOLOR........................................................................................87  
eTONE ..........................................................................................87  
q SHARPNESS..............................................................................87  
h NOISE REDUCTION................................................................87  
yINTELLIGENT SHARPNESS ..................................................87  
R INTELLIGENT DIGITAL ZOOM............................................87  
ZADVANCED ANTI BLUR........................................................88  
bFACE DETECTION...................................................................88  
nFACE RECOGNITION..............................................................88  
WMOVIE MODE ..........................................................................88  
a STILL SHOOTING IN MOVIE................................................88  
JAE BKT EV STEPS....................................................................89  
IFLASH.........................................................................................89  
gEXTERNAL FLASH..................................................................89  
KCUSTOM SET............................................................................90  
xiii  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of Contents  
H SHUTTER VOLUME ..............................................................101  
e SHUTTER SOUND.................................................................101  
I PLAYBACK VOLUME............................................................102  
J LCD BRIGHTNESS.................................................................102  
T MONITOR SUNLIGHT MODE............................................102  
E EVF/LCD MODE.....................................................................102  
M AUTO POWER OFF...............................................................102  
1QUICK START MODE...........................................................102  
F Fn BUTTON .............................................................................102  
LDUAL IS MODE..................................................................... 103  
BRED EYE REMOVAL............................................................. 103  
C AF ILLUMINATOR ................................................................ 103  
k AE/AF-LOCK MODE............................................................ 104  
v AE/AF-LOCK BUTTON ....................................................... 104  
jFOCUS CHECK...................................................................... 104  
t SAVE ORG IMAGE................................................................ 104  
m AUTOROTATE PB ................................................................. 105  
O BACKGROUND COLOR...................................................... 105  
c GUIDANCE DISPLAY........................................................... 105  
Q VIDEO SYSTEM..................................................................... 105  
S CUSTOM RESET ................................................................... 105  
T BATTERY TYPE...................................................................... 105  
P DISCHARGE (Ni-MH Batteries Only) ............................ 106  
U DATE STAMP......................................................................... 106  
Techniiccaall NNoottees  
Optional Accessories..................................................................107  
Accessories from FUJIFILM .................................................... 108  
Caring for the Camera .............................................................. 109  
Troubleshooting  
Problems and Solutions ...........................................................110  
Warning Messages and Displays..........................................116  
Apppendix  
Internal Memory/Memory Card Capacity ........................120  
Specifications................................................................................121  
xiv  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Symbols and Conventions  
The following symbols are used in this manual:  
c: This information should be read before use to ensure correct operation.  
a: Points to note when using the camera.  
b: Additional information that may be helpful when using the camera.  
P: Other pages in this manual on which related information may be found.  
Menus and other text in the camera monitor are shown in bold. In the illustrations in this manual, the  
monitor display may be simplified for explanatory purposes.  
Supplied Accessories  
The following items are included with the camera:  
Lens cap  
USB cable  
AA alkaline (LR6) batteries  
(×4)  
A/V cable  
• Shoulder strap  
• Owner’s Manual (this manual)  
• Basic Manual  
CD-ROM  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Parts of the Camera  
For more information, refer to the page listed to the right of each item.  
1
2
3
4
Command dial...........................32, 33, 34  
8
Memory card slot cover.......................12 16 Terminal cover............................70, 72, 82  
Mode dial......................................................22 9 I (continuous shooting) button...............42 17 Microphone (L/R).....................................67  
Hot shoe ........................................................89 10 Strap eyelet.................................................... 8 18 Focus ring .....................................................48  
AF-assist illuminator ............................103 11 d(exposure compensation) button.........46 19 Zoom ring.....................................................18  
Self-timer lamp..........................................41 12 Memory card slot.....................................12 20 Connector for HDMI cable.................70  
Lens................................................................ 121 13 Flash..................................................................39 21 USB cable connector.....................72, 82  
ON/OFF switch ..............................................15 14 N(flash pop-up) button..............................39 22 A/V cable connector..............................70  
Shutter button...........................................19 15 Speaker...................................................69, 96  
5
6
7
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
23 Monitor............................................................. 5 33 WB (white balance) button..........................52  
24 Tripod mount  
H(image search) button...........................63  
25 Battery-chamber latch............................ 9 34 Electronic viewfinder .............................. 4  
26 Battery-chamber cover.......................... 9 35 Eye sensor....................................................... 4  
27 Diopter adjustment control ................ 4 36 EVF/LCD (display selection) button.............. 4  
28 Indicator lamp............................................20 37 z(movie record) button.............................67  
29 ISO (sensitivity) button................................51 38 AE/AF LOCK (autofocus lock/autoexposure)  
k(playback zoom in) button.....................59  
button......................................................37, 49  
30 AE (autoexposure) button............................47 39 Selector button (see below)  
n(playback zoom out) button ..................59 40 a(playback) button.......................... 15, 21  
31 AF (autofocus) button...................................50 41 DISP (display)/BACK button .................7, 20  
g
(Intelligent Face Detection) button...54,88  
32 AF C-S-M (focus mode) button...................48  
info button....................................................62  
The Selector Button  
Move cursor up (e)  
Fn (Function) button (P53)/  
b(delete) button (P21)  
MENU/OK button (P16, 84, 91, 98)  
Move cursor left (g)  
F(macro) button (P38)  
Move cursor right (h)  
N(flash) button (P39)  
Move cursor down (f)  
h(self-timer) button (P41)  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
The Electronic Viewfinder (EVF)  
The electronic viewfinder provides the same information as the monitor, and can be  
used when bright lighting conditions make the display in the monitor difficult to see.  
Press EVF/LCD button to select from the auto switch, monitor, or electric view finder  
mode. When the auto switch mode is set, the electric view finder turns on automati-  
cally when you put your eye to the view finder, and the monitor turns on when you  
take your eye away (note that the eye sensor may not respond if you are wearing  
glasses or your head is an angle to the camera).  
Eye sensor  
The camera is equipped with diopter adjustment to accommodate individual dif-  
ferences in vision. Slide the diopter adjustment control up and down until the view-  
finder display is in sharp focus.  
Bright Ambient Lighting  
Reflections and glare caused by bright ambient lighting may make it hard to see the display in the monitor,  
particularly when the camera is used outdoors. This can be addressed by holding the EVF/LCD button to trigger  
outdoor mode. Outdoor mode can also be enabled using the T MONITOR SUNLIGHT MODE option in the  
setup menu (P102).  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Camera Displayys  
The following indicators may appear during shooting and playback. The indicators displayed vary with  
camera settings.  
Shooottiinngg  
1
2
3
Shooting mode.........................................22 18 Film simulation..........................................86  
Manual focus indicator.........................48 19 White balance ............................................52  
Intelligent Face Detection  
20 Battery level.................................................15  
indicator.........................................................54 21 Exposure indicator..................................46  
Intelligent sharpness..............................87 22 Blur warning......................................40, 116  
Metering........................................................47 23 Dual IS mode ...........................................103  
Intelligent digital zoom........................87 24 Focus warning ................................. 19, 116  
Continuous shooting mode .............42 25 Exposure compensation.....................46  
Date stamp................................................106 26 Aperture.................................................33, 34  
Silent mode indicator....................20, 99 27 AE lock indicator.......................................37  
4
5
6
7
8
9
10 Temperature warning........................120 28 Shutter speed.....................................33, 34  
* a: indicates that no memory card  
is inserted and that pictures will  
be stored in the camera’s internal  
memory (P12).  
11 Internal memory indicator*  
29 Date and time.............................................16  
12 Movie mode................................................68 30 Focus frame.................................................36  
13 Monitor sunlight mode.....................102 31 Self-timer indicator .................................41  
14 Number of available frames...........120 32 Macro (close-up) mode........................38  
15 Sensitivity..............................................51, 84 33 Flash mode...................................................39  
16 Image size/quality ...................................85  
17 Dynamic range..........................................86  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Playback  
1
2
Playback mode indicator ............ 21, 58  
Intelligent Face Detection  
9
Dynamic range..........................................86  
10 E mode..............................................23  
indicator.................................................54, 88 11 Portrait enhancer.....................................28  
Red-eye removal indicator.................93 12 Mark for upload to...................................92  
3
4
Pro focus mode,  
13 Photobook assist..................................... 64  
pro low-light mode................................25 14 Voice memo indicator...........................96  
Motion panorama z..................30, 66 15 DPOF print indicator..............................73  
3D image.......................................................26 16 Protected image.......................................94  
Gift image.....................................................58 17 Favorites.........................................................58  
Frame number........................................ 101  
5
6
7
8
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Hiding and Viewing Indicators  
Press DISP/BACK to cycle through shooting and playback indicators as follows:  
Shooting: Indicators displayed/indicators hidden/best framing/HD framing/histogram  
Playback: Indicators displayed/indicators hidden/Ifavorites (P58)/photo info  
Histograms  
Histograms show the distribution of tones in the im-  
age. Brightness is shown by the horizontal axis, the  
number of pixels by the vertical axis.  
Pixel brightness  
Shadows Highlights  
Optimal exposure: Pixels are  
distributed in an even curve  
throughout the tone range.  
Overexposed: Pixels are clustered  
at the right side of the graph.  
Dynamic range  
Sensitivity  
Film simulation  
White balance  
Frame number  
Image size and quality  
Shutter speed/aperture  
Flash mode  
q
e
t
u
o
!
!
w
r
y
i
Exposure compensation  
Picture (overexposed areas blink on and off )  
Histogram  
Underexposed: Pixels are clustered  
at the left side of the graph.  
Overexposed areas blink on and  
off.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Attaching Accessories  
Thee Strap  
The Leennss Cap  
Attach the lens cap as shown.  
Attach the strap to the two strap eyelets as shown  
below.  
To avoid losing the lens cap, pass the supplied string  
through the eyelet ( ) and secure the lens cap to the  
q
strap ( ).  
w
c
To avoid dropping the camera, be sure the strap is cor-  
rectly secured.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Batteries  
c
The camera takes four AA alkaline, lithium, or re-  
chargeable Ni-MH batteries. A set of four alkaline  
batteries is supplied with the camera. Insert the  
batteries in the camera as described below.  
• Do not open the battery-chamber cover when  
the camera is on. Failure to observe this pre-  
caution could result in damage to image files or  
memory cards.  
• Do not use excessive force when handling the  
battery-chamber cover.  
Open the battery-chamber cover.  
1
Slide the battery-cham-  
ber latch in the direction  
shown and open the bat-  
tery-chamber cover.  
a
Be sure the camera is off before opening the bat-  
tery-chamber cover.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Battery  
3
• Insert the batteries in the correct orientation.  
Insert the batteries.  
2
Insert the batteries in the  
orientation shown by the  
“+“ and “–“ marks inside  
the battery chamber.  
Never use batteries with peel-  
ing or damaged casing or mix  
Batttteerryy casing  
old and new batteries, batter-  
ies with different charge levels,  
or batteries of different types.  
Failure to observe these  
precautions could result  
in the batteries leaking or  
overheating.  
Never use manganese or Ni-Cd batteries.  
• The capacity of alkaline batteries varies with the  
manufacturer and drops at temperatures below  
10°C/50°F; Ni-MH batteries are recommended.  
• Fingerprints and other soil on the battery termi-  
nals can shorten battery life.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting the Battery  
Close the battery-chamber cover.  
Close the battery-cham-  
ber cover and slide it in  
until the latch clicks into  
place.  
Choosing the Battery Type  
After replacing the batteries  
3
with batteries of  
a
different  
type, select the battery type  
using the T BATTERY TYPE  
optioninthesetupmenu(P105)  
to ensure that the battery level  
is displayed correctly and the camera does not turn  
off unexpectedly.  
3
Do not use force. If the battery-chamber cover  
does not close, check that the batteries are in the  
correct orientation and try again.  
2 Using an AC Power Adapter  
The camera can be powered by an optional AC  
power adapter and DC coupler (sold separately).  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting a Memory Card  
c
Although the camera can store pictures in inter-  
nal memory, optional SD, SDHC and SDXC mem-  
ory cards (sold separately) can be used to store  
additional pictures.  
• Be sure card is in the correct orientation; do not  
insert at an angle or use force. If the memory  
card is not correctly inserted or no memory  
card is inserted, awill appear in the LCD moni-  
tor and internal memory will be used for record-  
ing and playback.  
Open the memory card slot cover.  
1
a
• SD/SDHC/SDXC memory  
cards can be locked, mak-  
ing it impossible to format  
Be sure the camera is off be-  
fore opening the memory  
card slot cover.  
the card or to record or  
delete images. Before in-  
serting an SD/SDHC/SDXC  
memory card, slide the  
write-protect switch to the  
unlocked position.  
Write-pprrotteecctt  
switch  
Insert the memory card.  
2
Holding the memory card in the orientation  
shown below, slide it in until it clicks into  
place at the back of the slot.  
Click  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting a Memory Card  
Close the memory card slot cover.  
Removing Memory Cards  
3
After confirming that the cam-  
era is off, press the card in and  
then release it slowly. The card  
can now be removed by hand.  
c
• The memory card may spring out if you remove  
your finger immediately after pushing the card in.  
• Memory cards may be warm to the touch after be-  
ing removed from the camera. This is normal and  
does not indicate a malfunction.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Inserting a Memory Card  
• miniSD or microSD adapters that are larger or smaller  
than the standard dimensions of an SD/SDHC/SDXC  
card may not eject normally; if the card does not  
eject, take the camera to an authorized service repre-  
sentative. Do not forcibly remove the card.  
Compatible Memory Cards  
FUJIFILM and SanDisk SD, SDHC, and SDXC mem-  
ory cards have been approved for use in the cam-  
era. A complete list of approved memory cards  
is available at http://www.fujifilm.com/support/  
digital_cameras/compatibility/. Operation is not  
guaranteed with other cards. The camera can not  
be used with xD-Picture Cards or MultiMediaCard  
(MMC) devices.  
• Do not affix labels to memory cards. Peeling labels  
can cause camera malfunction.  
• Movie recording may be interrupted with some types  
of SD/SDHC/SDXC memory card. Use a Gcard  
or better when shooting HD or high-speed movies.  
• The data in internal memory may be erased or cor-  
rupted when the camera is repaired. Please note that  
the repairer will be able to view pictures in internal  
memory.  
• Formatting a memory card or internal memory in the  
camera creates a folder in which pictures are stored.  
Do not rename or delete this folder or use a comput-  
er or other device to edit, delete, or rename image  
files. Always use the camera to delete pictures from  
memory cards and internal memory; before editing  
or renaming files, copy them to a computer and edit  
or rename the copies, not the originals.  
cMemory Cards  
Do not turn the camera off or remove the memory  
card while the memory card is being formatted or  
data are being recorded to or deleted from the card.  
Failure to observe this precaution could damage the  
card.  
• Format SD/SDHC/SDXC memory cards before first  
use, and be sure to reformat all memory cards af-  
ter using them in a computer or other device. For  
more information on formatting memory cards, see  
K FORMAT” (P100).  
• Memory cards are small and can be swallowed; keep  
out of reach of children. If a child swallows a memory  
card, seek medical assistance immediately.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning the Camera on and Off  
Rotate the ON/OFF switch to ON to turn the camera  
Battery Level  
on.  
Battery level is shown as follows:  
Indicator  
Description  
NO ICON  
B(red)  
Batteries are partially discharged.  
Batteries are low. Replace as soon as  
possible.  
A(blinks red) Batteries are exhausted. Turn camera  
off and replace batteries.  
Select OFF to turn the camera off.  
1
A battery warning may not be displayed before the  
camera turns off, particularly if batteries are reused  
after having once been exhausted. Power consump-  
tion varies greatly from mode to mode; the low bat-  
tery warning (B) may not be displayed or may be  
displayed only briefly before the camera turns off in  
some modes or when switching from shooting to  
playback mode.  
b Switching to Playback Mode  
Press the abutton to start playback. Press abutton  
again or press the shutter button halfway to return to  
shooting mode.  
b Auto Power Off  
The camera will turn off automatically if no operations  
are performed for the length of time selected in the  
M AUTOPOWEROFFmenu(P102). Toreactivatethe  
camera after it has turned off automatically, turn the  
ON/OFF switch to OFF and then back to ON.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Setup  
A language-selection dialog is displayed the first time the camera is turned on. Set up the camera as  
described below (for information on resetting the clock or changing languages, see page 99).  
Highlight a language and press MENU/OK.  
1
ENGLISH  
FRANCAIS  
DEUTSCH  
ESPAÑOL  
PORTUGUÊS  
a
Press DISP/BACK to skip the current step. Any steps you skip will be displayed  
the next time the camera is turned on.  
The date and time will be displayed. Press the selector left or right to  
highlight the year, month, day, hour, or minute and press up or down  
to change. To change the order in which the year, month, and day  
are displayed, highlight the date format and press the selector up or  
down. Press MENU/OK when settings are complete.  
A battery type message will be displayed; if the type differs from the  
type inserted in the camera, use the setup menu T BATTERY TYPE  
option (P11) to specify the correct type.  
DATE / TIME NOT SET  
2
3
2014  
2013  
YY. MM. DD  
2012 1.  
2010  
1
12:00  
AM  
2011  
SET  
NO  
b The Camera Clock  
If the batteries are removed for an extended period, the camera clock and battery type will be reset and the  
language-selection dialog will be displayed when the camera is turned on.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking Pictures in R (E AUTO) Mode  
This section describes how to take pictures in R (E AUTO) mode.  
Select a mode.  
1
When you rotate the mode dial to O, the R display will appear in the LCD monitor.  
The oIcon  
In R mode, the camera continuously adjusts focus and searches for faces, increasing the drain on the  
battery. ois displayed in the LCD monitor.  
Scene Icon (P23)  
The camera automatically selects the appropriate scene.  
a
• The camera analyses the scene and selects the preferred E mode when the shutter button is pressed  
halfway (P24).  
• To raise the flash when lighting is poor, press the flash pop-up button (P39).  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking Pictures in R (E AUTO) Mode  
Frame the picture.  
Holding the Camera  
2
Use the zoom ring to  
frame the picture in the  
display. The zoom indica-  
tor appears.  
Hold the camera steady with  
both hands and brace your  
elbows against your sides.  
Shaking or unsteady hands  
can blur your shots.  
Zoom ring  
To prevent pictures that are  
out of focus or too dark (un-  
derexposed), keep your fin-  
gers and other objects away  
from the lens and flash.  
Zoom indicator  
b Focus Lock  
Use focus lock (P36) to focus on subjects that are not  
in the focus frame.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking Pictures in R (E AUTO) Mode  
b The Shutter Button  
The shutter button has two positions. Pressing the  
Focus.  
3
4
Press the shutter button halfway  
to focus.  
shutter button halfway ( ) sets focus and exposure;  
q
to shoot, press the shutter button the rest of the way  
down ( ).  
w
If the camera is able to focus, it will beep twice  
and the indicator lamp will glow green.  
Double  
beep  
Click  
If the camera is unable to focus, the focus frame  
will turn red, swill be displayed, and the  
indicator lamp will blink green. Change the  
composition or use focus lock (P36).  
q
w
Press halfway  
Press the rest of  
the way down  
Shoot.  
Smoothly press the shutter button  
the rest of the way down to take  
the picture.  
a
If the subject is poorly lit, the AF-assist illuminator may  
lighttoassistfocus(P103). Forinformationonusingthe  
flash when lighting is poor, see page 39.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Taking Pictures in R (E AUTO) Mode  
Silent Mode  
The Indicator Lamp  
In situations in which camera sounds or lights may be  
unwelcome, hold the DISP/BACK button down until o  
is displayed.  
Indicator lamp  
The indicator lamp shows camera status as follows:  
Indiicattor lamp  
Glows green Focus locked.  
Blur, focus, or exposure warning. Pic-  
ture can be taken.  
Blinks green Recording pictures. Additional pic-  
and orange tures can be taken.  
Camera sttaattuuss  
The camera speaker, flash, and AF-assist illuminator/  
self-timer lamp turn off and flash and volume settings  
can not be adjusted (note that the flash will still fire  
when Cis selected in scene mode). To restore nor-  
mal operation, press the DISP/BACK button until the o  
icon is no longer displayed.  
Blinks green  
Glows  
orange  
Recording pictures. No additional pic-  
tures can be taken at this time.  
Flash charging; flash will not fire when  
picture is taken.  
Blinks orange  
Lens or memory error (memory card  
Blinks red full or not formatted, format error, or  
other memory error).  
b Warnings  
Detailed warnings appear in the display. See pages  
116119 for more information.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures  
Pictures can be viewed in the monitor. When taking important photographs, take a test shot and  
check the results.  
Press the abutton.  
Deleting Pictures  
To delete pictures, press the b button. A menu of  
deletion options will be displayed (P61).  
1
The most recent picture will be displayed in  
the monitor.  
b The Playback Menu  
Pictures can also be deleted from the playback menu  
(P91).  
View additional pictures.  
2
Press the selector right to view  
pictures in the order recorded, left  
to view pictures in reverse order.  
Press the shutter button to exit to shooting  
mode.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
Choose a shooting mode according to the scene or type of subject. To  
choose a shooting mode, rotate the mode dial to the desired setting. The  
following modes are available:  
P, S, A, M: Select for full control over camera settings, including  
aperture (M and A) and/or shutter speed (M and S) (P32).  
O: Improve clarity, reduce noise, in-  
crease dynamic range, or let the camera  
automatically adjust settings to suit the  
scene (P23).  
C
(CUSTOM): Recall stored settings for  
modes P, S, A, M and all E modes  
except R (P35).  
B
(AUTO):  
A
simple “point-and-shoot”  
N(MOTION PANORAMA 360): Select for  
taking a panorama (P30).  
mode recommended for first-time users  
of digital cameras (P24).  
Adv. (ADVANCED): Sophisticated tech-  
niques made easy (P24).  
SP1, SP2 (SCENE POSITION): Choose a scene suited to the subject  
or shooting conditions and let the camera do the rest (P28).  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
O(E AUTO/E Priority)  
Optimize settings for your current subject or improve clarity, reduce noise, or enhance  
dynamic range. Rotate the mode dial to Oand choose one of the following E  
modes in the shooting menu.  
R(EAUTO)  
The camera automatically selects the scene and E mode according to shooting conditions.  
a
If S is selected for OIMAGE SIZE in R mode, the camera will automatically select the optimal image size.  
The Scene Icon  
The camera selects from the following scenes:  
LAND-  
SCAPE  
NIGGHHTT  
(TRIPOD)  
h*  
dh *  
GREEN-  
ERY GREENERY  
SKY &  
Scene  
AUTO  
NIGHT  
MACRO BEACH SUNSET SNOOW  
SKY  
Main subject  
Nonn-porrtraait  
a
d
g
c
a
b
c
d*  
dd*  
e
u
v
w
x
y
z
Normal  
Backlit  
dc  
gc  
cc  
ac  
bc  
du  
gu  
cu  
au  
bu  
dv  
gv  
cv  
av  
bv  
dw  
gw  
cw  
aw  
bw  
dx  
gx  
cx  
ax  
bx  
dy  
gy  
cy  
ay  
by  
dz  
gz  
cz  
az  
bz  
Portrait  
ce  
Movving oobbject  
cd  
ad  
ch  
ah  
Normal  
Backlit  
Portraait and  
motion  
* If nis displayed, the camera will take a series of shots (advanced anti-blur; P24).  
c
The mode selected may vary with shooting conditions. If the mode and subject do not match, select Bmode  
(P24) or choose SP (P28) and select a scene manually.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
EPriority  
Advanced Anti Blur  
Select this mode to manually choose from the fol-  
lowing E modes:  
S (RESOLUTION PRIORITY): Choose for crisp, clear  
shots.  
T (HIGH ISO & LOW NOISE): Reduce noise in pic-  
tures taken at high sensitivities.  
When nis displayed, the camera will take a series of  
exposures and combine them to form a single image,  
reducing “noise” (mottling) and blur.  
a
n is available when ON is selected in the shooting  
menu (P88) and the flash (P39) is off or set to auto.  
U (D-RANGE PRIORITY): Increase the amount of  
detail visible in highlights.  
UDYNAMIC RANGE (P86) can be set to M  
(1600%) and D (800%).  
c
• Some time may be required to combine the expo-  
sures into a single image. A single combined image  
may not be created if the subject or camera moves  
during shooting. Keep the camera steady during  
shooting and do not move the camera until shoot-  
ing is complete.  
BAUTO  
Choose for crisp, clear snapshots. This  
mode is recommended in most situa-  
tions.  
• Frame coverage is reduced.  
The EXR Icon  
When the shutter button is pressed halfway, the  
camera chooses the preferred E mode:  
S (RESOLUTION PRIORITY): Produces crisp, clear  
shots.  
T (HIGH ISO & LOW NOISE): Reduces noise in pic-  
tures taken at high sensitivities.  
Adv. ADVANCED  
This mode combines “point-and-shoot”  
simplicity with sophisticated photograph-  
ic techniques. The  
A
Adv. MODE op-  
tion in the shooting menu can be used  
to choose from the following advanced  
modes:  
U (D-RANGE PRIORITY): Increases the amount of  
detail visible in highlights.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
iPRO FOCUS  
jPRO LOW-LIGHT  
The camera takes up to three  
shots each time the shutter  
button is pressed, softening  
the background to emphasize  
the main subject. The amount  
Each time the shutter button  
is pressed, the camera makes  
four exposures and combines  
them into a single photograph.  
Use to reduce noise and blur  
of softening can be adjusted before shooting by when photographing poorly lit subjects or static  
rotating the command dial. Use for portraits or subjects at high zoom ratios.  
photos of flowers similar to those produced by  
SLR cameras.  
a
A single combined photograph may not be created  
with some scenes or if the subject or camera moves  
during shooting. Do not move the camera until shoot-  
ing is complete.  
a
Softening can not be applied to background objects  
that are too close to the main subject. If a message  
stating that the camera can not create the effect is  
displayed when the camera focuses, try backing away  
from your subject and zooming in. The camera may  
also be unable to soften the background if the subject  
is moving; if prompted, check the results and try again.  
Pro Focus/Pro Low-Light  
To save unprocessed copies of pictures taken in these  
modes, select ON for the t SAVE ORG IMAGE op-  
tion in the setup menu (P104).  
c
• Keep the camera steady during shooting.  
• Frame coverage is reduced.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
nMULTIPPLLEE EEXXPPOSUUREE  
Create a photograph that combines two expo- Take two shots from different angles to create a  
sures. 3D image.  
iINDIVID.. SSHUTTERR 3D  
Take the first shot.  
To choose the order in  
1
2
1
which the pictures are tak-  
en, press the selector right  
to display the current order  
and then press the selector  
Press MENU/OK. The first shot will be shown su-  
perimposed on the view through the lens as a  
guide to taking the second shot.  
left or right to choose from the options below.  
G: Take the left shot first.  
H: Take the right shot first.  
a
To return to Step 1 and retake the first shot, press  
the selector left. To save the first shot and exit  
without creating a multiple exposure, press DISP/  
BACK.  
Press the shutter button to take the first shot.  
2
a
To exit without recording a picture, press DISP/  
BACK.  
Take the second shot.  
3
4
Press MENU/OK to create the multiple exposure,  
or press the selector left to return to Step 3 and  
retake the second shot.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
The first shot will be shown superimposed on  
the view through the lens. Using it as a guide,  
frame the second shot and press the shutter  
release button.  
Viewing and Printing 3D Images  
3
The camera displays images in 2D. Press the selector  
down to toggle between the first and second shots.  
Devices equipped for 3D display, such as the FINEPIX  
REAL 3D V3 digital photo frame or FINEPIX REAL 3D  
W3 digital camera, will display the images in 3D.  
3D prints can be ordered from http://www.fujifilm.  
com/3d/print/  
The supplied software displays 3D anaglyph images.  
3D photos can also be viewed using other applica-  
tions that support the MP format.  
a
• The 3D effect  
may not be vis-  
ible with some  
subjects or under  
some shooting conditions. For best results, the  
distance the camera is moved between shots  
should be about 1/30th to 1/50th of the dis-  
tance to the subject.  
3D TVs that support the MP format can display im-  
ages in 3D. See the manual for your TV for details.  
c
• Images are not output in 3D when printed directly  
from the camera.  
• 3D images are displayed in 2D in slide shows and  
when output on a conventional TV.  
• 3D images can not be edited or retouched.  
• The camera will turn off automatically if no op-  
erations performed for the time selected for  
NAUTOPOWEROFF(P102).Thefirstshotwill  
not be saved if the second shot is not taken be-  
fore the camera turns off.  
Note: The MP (Multi-Picture) format is a CIPA standard for  
files containing multiple still images. Files in MP format are  
referred to as “MP files” and have the extension “*.MPO”. The  
camera uses this format for 3D images.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
SP1/SP2: SCENE POSITION  
The camera offers a choice of “scenes,” each adapted to particular shooting conditions or  
a specific type of subject. Use the ASCENE POSITION option in the shooting menu to  
choose the scene assigned to the SP1/SP2 position on the mode dial.  
Scene  
CNATURAL & N  
DNATURAL LIGHT  
L PORTRAIT  
Description  
The camera takes two shots: one without the flash and one with.  
Capture natural lighting under low-light conditions.  
Choose for portraits.  
Z PORTRAIT ENHANCER Choose for a smooth skin effect when shooting portraits.  
l DOG  
Choose when photographing dogs.  
mCAT  
Choose when photographing cats.  
M LANDSCAPE  
N SPORT  
Choose for daylight shots of buildings and landscapes.  
Choose when photographing moving subjects.  
O NIGHT  
Choose this mode for poorly lit twilight or night scenes.  
Choose this mode for slow shutter speeds when shooting at night.  
Slow shutter speeds are used to capture the expanding burst of light from a firework.  
Choose this mode to record the vivid colors in sunrises and sunsets.  
Choose for crisp, clear shots that capture the brightness of scenes dominated by shining white snow.  
Choose for crisp, clear shots that capture the brightness of sunlit beaches.  
Capture indoor background lighting under low-light conditions.  
Choose for vivid close-ups of flowers.  
HNIGHT (TRIPOD)  
UFIREWORKS  
QSUNSET  
RSNOW  
VBEACH  
U PARTY  
V FLOWER  
WTEXT  
Take clear pictures of text or drawings in print.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
l DOG/mCAT  
The camera focuses on the faces of dogs or cats that are facing the camera, and the self-timer menu offers a  
nAUTO RELEASE option that releases the shutter automatically when a pet is detected (P41). During play-  
back, image search (P63) can be used to search for pictures taken in either mode.  
1
Although camera can detect many different breeds of dogs and cats, results may vary with the breed and shoot-  
ing conditions. The camera may fail to detect pets with dark-colored faces or long hair covering their entire face.  
If a dog or cat is not detected, the camera focuses on the subject at the center of the frame.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
Pan the camera in the direction shown by  
r MOTION PANORAMA 360  
5
the arrow. Shooting ends  
120  
Follow an on-screen guide  
to take photos that will  
automatically be joined to  
form a panorama.  
automatically when the  
progress bar is full and the  
panorama is complete.  
a
Shooting ends if the shutter but-  
ton is pressed all the way down during shooting. No  
panorama will be recorded if the shutter button is  
Progress bar  
Rotate the zoom ring until the zoom indicator  
turns white (P18).  
1
To select the angle through which you will pan pressed before the camera has been panned through  
2
120 °.  
the camera while shooting, press the selector  
down. Press the selector left or right to high-  
light an angle and press MENU/OK.  
Press the selector right to view a choice of pan  
directions. Press the selector left or right to  
highlight a pan direction and press MENU/OK.  
3
4
Press the shutter button all the way down to  
start recording. There is no need to keep the  
shutter button pressed during recording.  
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
c
z
• Panoramas are created from multiple frames. The  
camera may in some cases record a greater or lesser  
angle than selected or be unable to stitch the frames  
together perfectly. The last part of the panorama  
may not be recorded if shooting ends before the  
panorama is complete.  
• Shooting may be interrupted if the camera is panned  
too quickly or too slowly. Panning the camera in a  
direction other than that shown cancels shooting.  
• The desired results may not be achieved with mov-  
ing subjects, subjects close to the camera, unvarying  
subjects such as the sky or a field of grass, subjects  
that are in constant motion, such as waves and wa-  
terfalls, or subjects that undergo marked changes in  
brightness. Panoramas may be blurred if the subject  
is poorly lit.  
Choose zfor seamless 360 ° panoramas that can be  
played back in a loop (P66).  
a
The t SAVE ORG IMAGE option in the setup menu  
can be used to record a vpanorama in addition to  
a seamless zpanorama (P104).  
c
Depending on the subject and shooting conditions,  
the camera may produce distorted results or a v  
panorama. The top and bottom of the area visible in  
the shooting display are cropped out and white strips  
may appear at the top and bottom of the display.  
For Best Results  
For best results, move the camera in a small circle at  
a steady speed, keeping the camera horizontal and  
being careful only to pan in the direction shown by  
the guides. If the desired results are not achieved, try  
panning at a different speed.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
P: PROGRAM AE  
Program Shift  
Rotate the command dial to choose the desired com-  
bination of shutter speed and aperture. The default  
values can be restored by raising the flash or turning  
the camera off. Program shift is only available if the  
flash is off and an option other than AUTO is selected  
for UDYNAMIC RANGE and NISO.  
In this mode, the camera sets exposure  
automatically. If desired, you can choose  
different combinations of shutter speed  
and aperture that will produce the same  
exposure (program shift).  
c
Shutter speed  
Aperture  
If the subject is outside the metering range of the cam-  
era, the shutter speed and aperture displays will show  
“---”. Press the shutter button halfway to measure ex-  
posure again.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
S: SHUTTER PRIORITY AE  
Choose the shutter speed using the  
command dial, while the camera ad-  
justs aperture for optimal exposure.  
A: APERTURE PRIORITY AE  
Choose the aperture using the com-  
mand dial, while the camera adjusts  
shutter speed for optimal exposure.  
Shutter speed  
Aperture  
F3.5  
1000  
c
c
• If the correct exposure can not be achieved at the If the correct exposure can not be achieved at the se-  
selected shutter speed, aperture will be displayed in lected aperture, shutter speed will be displayed in red.  
red. Adjust shutter speed until the correct exposure Adjust aperture until the correct exposure is achieved.  
is achieved. If the subject is outside the metering If the subject is outside the metering range of the cam-  
range of the camera, the aperture display will show era, the shutter speed display will show “---”. Press the  
“F---”. Press the shutter button halfway to measure shutter button halfway to measure exposure again.  
exposure again.  
• The shutter speed is restricted depending on the ISO  
setting.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
M: MANUAL  
The Exposure Indicator  
In this mode, you choose both shutter  
speed and aperture. If desired, expo-  
sure can be altered from the value sug-  
gested by the camera.  
The amount the picture will be under- or over-ex-  
posed at current settings is shown by the exposure  
indicator.  
Press the dbutton to choose between shutter  
speed and aperture and rotate the command dial  
to adjust the selected setting.  
Shutter speed  
Aperture  
c
• Noise in the form of randomly-spaced bright pixels  
may occur in long exposures.  
• The shutter speed is restricted depending on the ISO  
setting.  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Shooting Mode  
Meenu/settiing  
Settinggs saved  
C: CUSTOM MODE  
NISO, OIMAGE SIZE, TIMAGE QUAL-  
ITY, UDYNAMIC RANGE, PFILM SIMULA-  
TION, dWB SHIFT, fCOLOR, eTONE,  
q SHARPNESS, h NOISE REDUCTION,  
yINTELLIGENT SHARPNESS, R INTELLI-  
GENT DIGITAL ZOOM, bFACE DETECTION,  
nFACE RECOGNITION, WMOVIE MODE,  
a STILL SHOOTING IN MOVIE, JAE BKT  
EV STEPS, IFLASH, gEXTERNAL FLASH  
In P, S, A, M and all E modes ex-  
cept R, the KCUSTOM SET option  
in the shooting menu (P90) can be  
used to save current camera and menu  
settings. These settings are recalled  
whenever the mode dial is rotated to  
C (custom mode).  
Shooting  
menu  
Setup menuu C AF ILLUMINATOR  
ISO, metering, autofocus mode, focus mode,  
white balance, burst mode, macro mode, flash  
mode, exposure compensation, monitor dis-  
play options (DISP/BACK button)  
Other  
c
Once the camera is turned off, R INTELLIGENT DIGI-  
TAL ZOOM is deactivated.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Focus Lock  
To compose photographs with off-center subjects:  
Position the subject in the focus frame.  
Autofocus  
1
2
Although the camera boasts a high-precision autofo-  
cus system, it may be unable to focus on the subjects  
listed below. If the camera is unable to focus using  
autofocus, use focus lock to focus on another subject  
at the same distance and then recompose the pho-  
tograph.  
• Very shiny subjects such as mirrors or car bodies.  
• Fast-moving subjects.  
• Subjects photographed through a window or other  
reflective object.  
Focus.  
Press the shutter button  
halfway to set focus and  
exposure. Focus and ex-  
posure will remain locked  
while the shutter button  
is pressed halfway (AF/AE  
lock).  
• Dark subjects and subjects that absorb rather than  
reflect light, such as hair or fur.  
• Insubstantial subjects, such as smoke or flame.  
• Subjects that show little contrast with the back-  
ground (for example, subjects in clothing that is the  
same color as the background).  
Recompose the picture.  
3
Keeping the shutter but-  
ton pressed halfway, re-  
compose the picture.  
• Subjects positioned in front of or behind a high-  
contrast object that is also in the focus frame (for  
example, a subject photographed against a back-  
drop of highly contrasting elements).  
Shoot.  
4
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The AE/AF LOCK Button  
The AE/AF LOCK button can be used to lock exposure or focus.  
Lockingg EExxppoossuure  
Recompose the picture.  
Keeping the shutter button pressed halfway,  
recompose the picture.  
3
Meter exposure.  
1
Position the subject in the focus frame and  
press the AE/AF LOCK button to meter expo-  
sure.  
c
Adjusting zoom ends AE lock. AE lock is not avail-  
able with Intelligent Face Detection.  
Shoot.  
4
Lockiing Focus  
Focus.  
Keeping the AE/AF LOCK  
button pressed, press the  
shutter button halfway  
to focus. Focus and ex-  
2
If AF LOCK ONLY is selected for v AE/AF-LOCK  
BUTTON in the setup menu (P104), pressing the  
AE/AF LOCK button locks focus. If AE/AF LOCK is  
selected, both focus and exposure will be locked.  
+
posure will remain locked while the shutter  
button is pressed halfway, even if you later  
release the AE/AF LOCK button.  
a
If AE&AF ON/OFF SWITCH is selected for k AE/AF-  
LOCKMODEinthesetupmenu(P104), exposure and/  
or focus will lock when the AE/AF LOCK button is pressed  
and remain locked until the button is pressed again.  
Repeat steps 1 and 2 as desired to refocus  
before taking the picture.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
FMacro and Super Macro Modes (Close-ups)  
For close-ups, press the selector left (F) to choose from the macro options shown below.  
Choose from F(macro mode),  
G(super macro mode), or  
OFF (macro mode off)  
When macro mode is in effect, the camera focuses on subjects near the center of the frame. Use the  
zoom ring to compose pictures. The following restrictions apply in super macro mode: the lens must  
be zoomed all the way out (at other zoom positions, ois displayed) and the flash can not be used.  
a
• Use of a tripod is recommended to prevent blur caused by camera shake.  
• Flash compensation may be required when using the flash (P89).  
• Using the flash at close range may cast a lens shadow. Zoom a little or have more distance from the subject.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NUsing the Flash (Super-Intelligent Flash)  
When the flash is used, the camera’s Super-Intelligent Flash system instantly analyzes the scene based  
on such factors as the brightness of the subject, its position in the frame, and its distance from the  
camera. Flash output and sensitivity are adjusted to ensure that the main subject is correctly exposed  
while preserving the effects of ambient background lighting, even in dimly-lit indoor scenes. Use the  
flash when lighting is poor, for example when shooting at night or indoors under low light.  
Raise the flash.  
Press the flash pop-up button to raise the flash.  
1
Choose a flash mode.  
Press the selector right (N). The flash mode changes each time the selector is pressed.  
2
Mode  
A/K  
(AUTO FLASH)  
Description  
The flash fires when required. Recommended in most situations.  
N/L  
The flash fires whenever a picture is taken. Use for backlit subjects or for natural  
(FORCED FLASH) coloration when shooting in bright light.  
O/M  
Capture both the main subject and the background under low light (note that  
(SLOW SYNCHRO) brightly lit scenes may be overexposed).  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
NUsing the Flash (Super-Intelligent Flash)  
c
The flash may fire several times with each shot. Do not move the camera until shooting is complete.  
a
• The peripheral part of an image may be dark when using the flash.  
• Remove lens hoods to prevent shadows in photos taken with the flash.  
Red-Eye Removal  
When Intelligent Face Detection is active (P54), and ON is selected for BRED EYE REMOVAL in the  
setup menu (P103), red-eye removal is available in K, L, and M.  
Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s  
retinas as shown in the illustration at right.  
Turning the Flash Off  
Lower the flash where flash photography is prohibited or to capture natural lighting un-  
der dim light. At slow shutter speeds, kwill be displayed to warn that pictures may be  
blurred; use of a tripod is recommended.  
Optional Flash Units  
The camera can be used with optional EF-42 and EF-20 clip flash units (P108).  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
JUsing the Self-Timer  
To use the self-timer, press the selector down (h) and choose from the following options:  
Option  
T(OFF)  
Description  
Self-timer off.  
The shutter is released automatically when the camera detects the face of a cat or dog  
(P29).  
The shutter is released automatically when the camera detects a human portrait subject  
facing the camera. Use for portraits of babies.  
n(AUTO RELEASE)  
o(AUTO RELEASE)  
The shutter is released ten seconds after the shutter button is pressed. Use for self-portraits.  
The self-timer lamp on the front of the camera lights when the timer starts and begins to  
blink shortly before the photo is taken.  
The shutter is released two seconds after the shutter button is pressed. Use to reduce blur  
caused by the camera moving when the shutter button is pressed. The self-timer lamp will  
blink as the timer counts down.  
S(10 SEC)  
R(2 SEC)  
Burst Mode  
If I is selected for burst mode (P42), the camera will record burst of five photographs when the timer expires,  
improving your chances of getting the desired results in portraits taken with the self-timer.  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I Continuous Shooting (Burst Mode)  
Capture motion or automatically vary selected settings over a series of pictures.  
a
• Focus and exposure are determined by the first frame  
in each series. The flash turns off automatically; the  
previously-selected flash mode is restored when con-  
tinuous shooting is turned off.  
• Frame rate varies with shutter speed, shooting condi-  
tions, and the number of pictures in each burst.  
• The number of pictures that can be taken in a single  
burst varies with the scene and camera settings. The  
number of pictures that can be recorded depends on  
the memory available.  
Press the I button and choose  
from the following options:  
OFF: OFF  
CONTINUOUS  
I: TOP  
P: BEST FRAME CAPTURE  
O: AE BKT  
X: FILM SIMULATION BKT  
Y: DYNAMIC RANGE BKT  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I Continuous Shooting (Burst Mode)  
ITOP n  
PBEST FRAMEE CCAAPTURE  
The camera takes photographs while the shutter The camera takes a series of pictures, starting  
button is pressed. To choose the frame rate:  
before and ending after the shutter button is  
pressed. To choose the frame rate and number  
of shots:  
Press the selector right  
1
when the camera is in  
shooting mode.  
Press the selector right when the camera is in  
1
shooting mode.  
Highlight the current frame rate and press the  
Press the selector up or down to choose a  
frame rate and press MENU/OK to select and re-  
turn to shooting mode.  
2
2
selector right, then press selector up or down  
to choose a new value and press MENU/OK to  
select.  
c
Some frame rates may reduce the number of shots  
available in Step 3.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I Continuous Shooting (Burst Mode)  
Highlight the number of  
shots and press the selec-  
tor right. Press the selector  
up or down to choose the  
number of shots in each  
burst and left or right to  
choose their distribution  
(the number on the left is taken before and the  
number on the right after the shutter button  
is pressed). Press MENU/OK when settings are  
complete.  
Take photographs. The camera begins record-  
ing while the shutter button is pressed half-  
way, and completes the burst when the shut-  
ter button is pressed all the way down. The  
illustration shows a burst of eight shots, three  
before the shutter button is pressed and four  
after.  
Shots per burst  
3
4
5
Distribution  
Shutter button  
pressed all the  
way down  
Shutter button  
pressed halfway  
Press DISP/BACK to return to shooting mode.  
“Before” “After”  
shots shots  
c
• If the shutter button is pressed all the way down be-  
fore the number of frames selected for the “before”  
portion is recorded, the remaining frames will be  
taken after the shutter button is pressed all the way  
down.  
• If the shutter button is pressed halfway for an extend-  
ed period, the camera may record the burst before  
the shutter button is pressed all the way down.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
I Continuous Shooting (Burst Mode)  
OAE BKT  
YDYNAMIC RRANGGE BKT  
Each time the shutter button is pressed, the Each time the shutter button is pressed, the cam-  
camera takes three shots: one using the metered era takes three shots at different UDYNAMIC  
value for exposure, the second overexposed by RANGE settings (P86): A 100% for the first,  
the amount selected for JAE BKT EV STEPS in B 200% for the second, and C 400% for  
the shooting menu (P89), and the third underex- the third (NISO can not exceed 3200; values less  
posed by the same amount (the camera may not than 400 are not available when O is selected for  
be able to use the selected bracketing increment OIMAGE SIZE).  
if the amount of over- or under- exposure exceeds  
the limits of the exposure metering system).  
XFILMM SSIMMUULATIION BKT  
Each time the shutter button is pressed, the cam-  
era takes one shot and processes it to create three  
copies with different PFILM SIMULATION set-  
tings(P86):c PROVIA/STANDARDforthefirst,  
d Velvia/VIVID for the second, and e ASTIA/  
SOFT for the third.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
dExposure Compensation  
Use exposure compensation when photographing very bright, very dark, or high-contrast subjects.  
Press the dbutton to display  
the exposure indicator and  
rotate the command dial to  
choose a value.  
The effect is visible in the display. Press the d  
button again to select.  
Exposure indicator  
Choose negative values Choose positive values to  
to reduce exposure  
increase exposure  
1
• A d icon and exposure indicator are displayed at  
settings other than 0. Exposure compensation is  
not reset when the camera is turned off; to restore  
normal exposure control, choose a value of 0.  
• Turn the flash off when using exposure compensa-  
tion.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Metering  
To choose how the camera meters exposure, press the AE button and then choose from the following  
options.  
Option  
o
Description  
Automatic scene recognition is used to adjust exposure for a wide range of shooting conditions.  
(MULTI)  
p
The camera meters lighting conditions at the center of the frame. Recommended when the back-  
(SPOT) ground is much brighter or darker than the main subject.  
Exposure is set to the average for the entire frame. Provides consistent exposure across multiple  
shots with the same lighting, and is particularly effective for landscapes and portraits of subjects  
dressed in black or white.  
q
(AVERAGE)  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Focus Mode  
To choose how the camera focuses, during still photography and movie recording press the AF C-S-M  
button and then choose from the following options.  
Mode  
K
Description  
Focus locks while the shutter button is pressed halfway. Choose for stationary subjects.  
(SINGLE AF)  
The camera continually adjusts focus to reflect changes in the distance to the subject even  
when the shutter button is not pressed halfway (note that this increases the drain on the  
batteries). r (CENTER)isautomaticallyselectedforautofocusmode(P50);ifIntelligentFace  
Detection is on, the camera will continually adjust focus for the selected face. Choose for  
moving subjects.  
J
(CONTINUOUS AF)  
Focus manually using the focus ring. Rotate the ring left to reduce the focus distance, right  
to increase. The manual focus indicator indicates how closely the focus distance matches the  
distance to the subject in the focus brackets. Choose for manual control of focus or in situa-  
tions in which the camera is unable to focus using autofocus (P36). Intelligent Face Detection  
turns off automatically.  
j
(MANUAL FOCUS)  
Manual focus  
mode icon  
Reduce focus  
distance  
Increase focus  
distance  
Manual focus  
indicator  
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Focus Mode  
1
• Use of a tripod is recommended. Focus may be affected if the camera moves.  
• If ON is selected for jFOCUS CHECK in the setup menu (P104), the whole image will be magnified to assist  
focus when the focus ring is rotated.  
• The camera will not focus when the focus ring is rotated all the way to the right. To focus at infinity, focus on a  
distant object.  
• To focus using autofocus, press the AE/AF LOCK button. This can be used to  
quickly focus on a chosen subject in manual focus mode.  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Autofocus Mode  
To choose how the camera selects the focus area t (AREA): The focus position  
when K is selected for focus mode (P48), press  
the AF button and rotate the command dial. Note  
that regardless of the option selected, the cam-  
era will focus on the subject in the center of the  
monitor when macro mode is on (P38).  
can be chosen manually by  
pressing the selector up,  
down, left, or right and press-  
ing MENU/OK when the focus  
brackets are in the desired position. Choose for  
precise focus when the camera is mounted on a  
tripod.  
Focus target  
x (TRACKING): Position the  
subject in the focus target  
and press the selector left.  
The camera will track the  
The following options are available:  
subject and adjust focus as it  
moves through the frame.  
r (CENTER): The camera fo-  
cuses on the subject in the  
center of the frame. This op-  
tion can be used with focus  
lock.  
s (MULTI): When the shutter  
button is pressed halfway,  
the camera detects high-  
contrast subjects near the  
center of the frame and se-  
Focus frame  
lects the focus area automatically.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sensitivity  
To adjust the camera’s sensitivity to light, press the ISO button and choose from the options below.  
ISO  
Higher values can reduce blur; note, however, that mottling may appear in pictures taken at high sensitivities.  
100  
12800  
ISO  
Bright  
Dark  
Scene  
Less noticeable  
More noticeable  
Noise (mottling)  
Option  
Description  
Sensitivity is adjusted automatically in response to shooting conditions.  
AUTO (3200) / AUTO (1600) / AUTO (800) / As above, except that sensitivity will not be raised above the value in paren-  
AUTO  
AUTO (400)  
theses.  
12800 / 6400 / 3200 / 1600 / 800 / 400 /  
200 / 100  
Sensitivity is set to the specified value, which is shown in the display.  
a
Sensitivity can also be adjusted in the shooting menu (P84).  
51  
Download from Www.Somanuals.com. All Manuals Search And Download.  
White Balance  
For natural colors, press the WB button and choose  
a setting that matches the light source.  
h: Custom White Balance  
Choose h to adjust white balance for unusual light-  
ing conditions. White balance measurement options  
will be displayed; frame a white object so that it fills  
the LCD monitor and press the shutter button all the  
way down to measure white balance.  
If “COMPLETED!” is displayed, press MENU/OK to set  
white balance to the measured value.  
If “UNDER” is displayed, raise exposure compensa-  
tion (P46) and try again.  
If “OVER” is displayed, lower exposure compensation  
and try again.  
Option  
AUTO  
h
Description  
White balance adjusted automatically.  
Measure a value for white balance.  
For subjects in direct sunlight.  
i
j
For subjects in the shade.  
a
k
Use under “daylight” fluorescent lights.  
Use under “warm white” fluorescent lights.  
Use under “cool white” fluorescent lights.  
Use under incandescent lighting.  
For greater precision, adjust PFILM SIMULATION,  
NISO, and UDYNAMIC RANGE before measur-  
ing white balance.  
l
m
n
a
• At settings other than h, auto white balance is used  
with the flash.  
• Results vary with shooting conditions. Play pictures  
back after shooting to check colors in the LCD moni-  
tor.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Fn Button  
The role played by the Fn button can be selected using the FFn BUTTON  
option in the setup menu (P102).  
The following options are available:  
IMAGESIZE( P85)/IMAGEQUALITY( P85)/DYNAMICRANGE( P86)/FILMSIMULATION  
(P86)/FACEDETECTION( P88)/FACERECOGNITION( P88)/INTELLIGENTDIGITALZOOM  
(P87)/MOVIE MODE (P88)  
Fn button  
a
The FFn BUTTON menu can also be displayed by pressing and holding the Fn button.  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
bIntelligent Face Detection  
Intelligent Face Detection allows the camera to automatically detect human faces and set focus and  
exposure for a face anywhere in the frame for shots that emphasize portrait subjects. Choose for group  
portraits (in horizontal or vertical orientations) to prevent the camera from focusing on the background.  
To use Intelligent Face Detec-  
tion, press MENU/OK to display  
the shooting menu and se-  
lect ON for bFACE DETEC-  
TION. Faces can be detected  
with the camera in vertical  
or horizontal orientation; if a  
face is detected, it will be indicated by a green bor-  
der. If there is more than one face in the frame, the  
camera will select the face closest to the center;  
other faces are indicated by white borders.  
Intelligent Face Detection  
Intelligent Face Detection is  
recommended when using the  
self-timer for group- or self-por-  
traits (P41).  
7
Green border  
When a picture taken with Intelligent Face Detec-  
tion is displayed, the camera can automatically select  
facesforred-eyeremoval(P93),playbackzoom(P59),  
slide shows (P93), image search (P63), image disp.  
(P 100), printing (P76), and cropping (P94).  
c
• In some modes, the camera may set exposure for the  
frame as a whole rather than the portrait subject.  
• If the subject moves as the shutter button is pressed,  
their face may not be in the area indicated by the  
green border when the picture is taken.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
nFace Recognition  
The camera can store information on the face  
and personal details (name, relationship, and  
birth date) of portrait subjects and assign these  
subjects priority for Intelligent Face Detection or  
display their names and other information during  
playback.  
Enter face recognition data.  
3
Press MENU/OK to display face recognition  
data and enter the following information:  
NAME: Enter a name of up to 14 characters  
and press MENU/OK.  
BIRTHDAY: Enter the subject’s date of birth  
and press MENU/OK.  
CATEGORY: Choose the option that describes  
your relationship to the subject and press  
MENU/OK.  
Adding New Faces  
Follow the steps below to add faces to the face  
recognition database.  
Select REGISTER.  
a
1
Select REGISTER for nFACE RECOGNI-  
TION in the shooting menu.  
a
If you attempt to zoom in on the face of a person in-  
dicated by a green border in the face recognition da-  
tabase on their birthday, the camera will display their  
name and the message “Happy Birthday!”.  
To disable face recognition, select OFF.  
c
Face recognition may not be available depending on  
the shooting mode.  
Take a photograph.  
After checking that the  
subject is facing the cam-  
2
era, frame the subject us-  
ing the guides and take  
the photograph.  
a
If an error is displayed, take the photograph again.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
nFace Recognition  
Viewing, Editing, and Deleting Existing Data Adding Faces Automatically  
Follow the steps below to view, edit, or delete To automatically add frequently-photographed  
face recognition data.  
subjects to the face recognition database, select  
ON for AUTO REGISTRATION in the face recog-  
nition menu. If the camera detects a face that has  
been photographed many times without being  
added to the database, it will display a message  
prompting you to create a new face recognition  
entry. Press MENU/OK and enter face recognition  
data.  
Select VIEW & EDIT for nFACE RECOG-  
NITION.  
1
Select a face.  
2
View or edit face recognition data.  
3
The name, category, or birth date can be ed-  
ited as described in Step 3 of “Adding New  
Faces” (P55). To retake the photo, select RE-  
PLACING IMAGE and shoot a new portrait  
as described above.  
1
The camera may sometimes fail to recognize new faces  
automatically. If necessary, faces can be added manu-  
ally using the REGISTER option.  
a
To delete face recognition data for the selected sub-  
ject, select ERASE.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
nFace Recognition  
Face Recognition  
The camera can store up to eight faces. If you attempt to add a ninth face, a confirmation dialog will be dis-  
played; use VIEW & EDIT to make room for new faces by deleting existing data.  
When Intelligent Face Detection (P54) is on and the frame contains multiple subjects from the face recognition  
database, the camera displays the name of the subject that will be used to set focus and exposure (the subject  
shown by the green frame). If no name is entered, the camera will show “---”. Subjects identified using face rec-  
ognition but not used to set focus and exposure are shown by orange frames, other subjects by white frames.  
c
The camera may fail to identify subjects in the face recognition database if they are not facing the camera or  
are only partly in the frame, or if details of the subjects’ faces or expressions differ markedly from those in the  
database.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Options  
To view the most recent picture in the monitor,  
press the abutton.  
Continuous Shooting  
In the case of pictures taken in continuous shoot-  
ing mode, only the first frame of each series will  
be displayed. Press the selector down to view the  
other pictures in the series.  
IFavorites: Rating Pictures  
Press the selector right to view pictures  
in the order recorded, left to view pic-  
tures in reverse order. Keep the selector  
pressed to scroll rapidly to the desired  
frame.  
To rate the picture currently displayed in full-frame  
playback, press DISP/BACK and press the selector  
up and down to select from zero to five stars.  
a
Pictures taken using other cameras are indicated by a  
m(“gift image”) icon during playback.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Options  
Playback Zoom  
Intelligent Face Detection  
Pictures taken with Intelligent Face Detection (P54)  
are indicated by a g icon. Press the g button to  
zoom in on the subject selected with Intelligent Face  
Detection. You can then use the kand nbuttons  
to zoom in and out.  
Press kto zoom in on pictures displayed in sin-  
gle-frame playback; n to zoom out. When the  
picture is zoomed in, the selector can be used to  
view areas of the image not currently visible in the  
display.  
Zoom indicator  
Navigation window  
shows portion of image  
currently displayed in  
monitor  
Press DISP/BACK or MENU/OK to exit zoom.  
a
• Rotate the command dial to view other pictures with-  
out changing the zoom ratio.  
• The maximum zoom ratio varies with image size.  
Playback zoom is not available with cropped or re-  
sized copies saved at a size of a or smaller.  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playback Options  
Multi-Frame Playback  
To change the number of images displayed, press Use the selector to highlight images and press  
nin single-frame view.  
MENU/OK to view the highlighted image full frame.  
In the nine- and hundred-frame displays, press  
the selector up or down to view more pictures.  
b Two-Frame Display  
Two-frame display can be used  
to compare pictures taken in  
Cmode.  
Press kto view  
fewer images.  
Press nto view  
more images.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ADeleting Pictures  
To delete individual pictures, multiple selected pictures, or all pictures,  
press MENU/OK, select AERASE (P91), and choose from the options be-  
low. Note that deleted pictures can not be recovered. Copy important  
pictures to a computer or other storage device before proceeding.  
Option  
Description  
Press the selector left or right to scroll through pictures and press MENU/OK to delete the current picture  
(a confirmation dialog is not displayed).  
FRAME  
Highlight pictures and press MENU/OK to select or deselect (pictures included in the photobook or print  
order are shown by S). When the operation is complete, press DISP/BACK to display a confirmation dia-  
log, then highlight OK and press MENU/OK to delete the selected pictures.  
SELECT FRAMES  
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete all unprotected pic-  
tures (if a memory card is inserted, only the pictures on the memory card will be affected; the pictures  
in internal memory are only deleted if no memory card is inserted). Pressing DISP/BACK cancels deletion;  
note that any pictures deleted before the button was pressed can not be recovered.  
ALL FRAMES  
a
• Protected pictures can not be deleted. Remove protection from any pictures you wish to delete (P94).  
• If a message appears stating that the selected images are part of a DPOF print order, press MENU/OK to delete the  
pictures.  
61  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Photo Information  
a
Photo information can be viewed by pressing the  
Use the command dial to view other images.  
The active focus point is shown by a+icon.  
info button.  
Zooming in on the Focus Point  
Press the f button to zoom in  
on the focus point. Press DISP/  
BACK or MENU/OK to return to full-  
frame playback.  
PLAYBACK  
INFORMATION 1  
AF  
INFORMATION 2  
62  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Image Search  
Search for images by various criteria.  
Press the Hbutton during playback.  
Select a search condition. Only pictures that  
match the search condition will be displayed.  
To delete or protect selected pictures or to  
view the selected pictures in a slide show,  
press MENU/OK and choose from the following  
options:  
1
3
Option  
See page  
61  
94  
Highlight one of the following options and  
press MENU/OK:  
2
AERASE  
DPROTECT  
ISLIDE SHOW  
Option  
Description  
Find all pictures taken on a selected  
date.  
93  
BY DATE  
Find all pictures based on specified face  
information.  
BY FACE  
Find all pictures with a specified rating  
(P58).  
Find all pictures that match a selected  
scene.  
BY IFAVORITES  
BY SCENE  
BY TYPE OF DATA Find all still pictures or all movies.  
Find all pictures selected for upload to a  
specified destination (P92).  
BY UPLOAD MARK  
63  
Download from Www.Somanuals.com. All Manuals Search And Download.  
XPhotoBook Assist  
Create books from your favorite photos.  
Creating a PhotoBook  
Scroll through the images and press the selec-  
tor up to select or deselect the current image  
for inclusion in the book. To display the current  
image on the cover, press the selector down.  
Select XPHOTOBOOK ASSIST in the play-  
back menu.  
5
1
Highlight NEW BOOK.  
2
a
The first picture selected automatically becomes  
the cover image. Press the selector down to select  
a different picture for the cover.  
Press MENU/OK to display the new  
book dialog.  
3
Choose pictures for the new book.  
SELECT FROM ALL: Choose from all the  
pictures available.  
SELECT BY IMAGE SEARCH: Choose from pictures  
matching selected search conditions (P63).  
4
Press MENU/OK to exit when the book  
is complete.  
6
7
Highlight COMPLETE PHOTOBOOK.  
a
Neither photographs a or smaller nor movies can  
be selected for photobooks.  
a
Choose SELECT ALL to select all photos, or all pho-  
tos matching the specified search conditions, for  
the book.  
64  
Download from Www.Somanuals.com. All Manuals Search And Download.  
kPhotoBook Assist  
Press MENU/OK. The new book will be  
added to the list in the photobook  
assist menu.  
Viewing PhotoBooks  
8
Highlight a book in the photobook assist menu  
and press MENU/OK to display the book, then press  
the selector left and right to scroll through the  
pictures. Press DISP/BACK to return to the photo-  
book assist menu.  
c
• Photobooks can contain up to 300 pictures.  
• Books that contain no photos are automatically  
deleted.  
Editing and Deleting PhotoBooks  
PhotoBooks  
Photobooks can be copied to a computer using the  
supplied MyFinePix Studio software.  
Display the photobook and press  
1
MENU/OK to view book edit options.  
Choose from the following options:  
EDIT: Edit the book as described in “Creating a  
PhotoBook” on page 64.  
2
ERASE: Delete the current photobook.  
Follow the on-screen instructions.  
3
65  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Panoramas  
If you press the selector down when a panorama is displayed full frame, the camera will play back the  
picture from left to right or from bottom to top.  
PAUSE  
The following operations can be performed during playback:  
Opperaattiion  
Button  
Description  
Start/pause  
playback  
Press the selector down to start playback. Press again to pause.  
End playback  
Press the selector up to end playback.  
a
• Once displayed in full-frame playback, panoramas can be zoomed in or out using the zoom buttons.  
zpanoramas play back in an endless loop (P31); the playback direction can be controlled by pressing the  
selector left or right. The camera will not turn off automatically while playback is in progress (P102).  
66  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Movies  
Press zto shoot a movie. During recording, the following indicators will be displayed and sound will  
be recorded via the built-in microphone (be careful not to cover the microphone during recording).  
yREC icon  
Number of photos that  
can be taken during  
recording  
Time remaining  
To end recording, press the zbutton again. Recording ends automatically when the movie reaches  
maximum length or memory is full.  
a
• Zoom can be adjusted while recording is in progress.  
• If the subject is poorly lit, the AF-assist lamp may light to assist the focus operation.  
To turn the AF-assist lamp off, select OFF for C AF ILLUMINATOR in the setup menu (P103).  
• Exposure and white balance are adjusted automatically throughout recording. The color and brightness of the  
image may vary from that displayed before recording begins.  
• Sounds made by the camera may be recorded.  
67  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording Movies  
Movie Frame Size  
Before recording, select a frame size using the  
WMOVIE MODE option in the shooting menu  
(P88).  
Taking Photographs during Recording  
Press the shutter button to take a photograph during  
recording.  
a
• Seepage88forinformationonchoosinghowphoto-  
graphs are recorded.  
• The photo is saved separately from the movie and  
does not appear as part of the movie.  
Option  
Description  
i 1920 (1920 × 1080) Full HD (High Definition).  
h 1280 (1280 × 720) High Definition.  
f (640 × 480)  
Standard definition.  
c
• Photos can not be taken while a high-speed movie  
is being recorded.  
High speed movie. Sound is not  
recorded, and focus, exposure,  
and white balance are not ad-  
justed automatically. Black bands  
appear at the top and bottom of  
movies recorded at Y320 × 112.  
Y640 × 480 (80fps)  
Y320 × 240 (160fps)  
Y320 × 112 (320fps)  
• The number of photos that can be taken is limited.  
c
• The indicator lamp lights while movies are being re-  
corded. Do not open the battery chamber during  
shooting or while the indicator lamp is lit. Failure  
to observe this precaution could prevent the movie  
from being played back.  
• Vertical or horizontal streaks may appear in movies  
containing very bright subjects. This is normal and  
does not indicate a malfunction.  
• The temperature of the camera may rise if it is used to  
record movies for an extended period or if the ambi-  
ent temperature is high. This is normal and does not  
indicate a malfunction.  
68  
Download from Www.Somanuals.com. All Manuals Search And Download.  
aViewing Movies  
During playback (P58), movies  
are displayed in the monitor as  
shown at right. The following  
operations can be performed  
while a movie is displayed:  
Playback Speed  
Arrow  
Press the selector left or right to  
adjust playback speed. Speed is  
shown by the number of arrows  
(Mor N).  
Opperaattiion  
Description  
Press the selector down to start playback.  
b Viewing Movies on a Computer  
Start/ Press again to pause. While playback is  
pause paused, you can press the selector left or  
playback right to rewind or advance one frame at  
a time.  
End  
playback  
Copy movies to the computer before viewing.  
c
Do not cover the speaker during playback.  
Press the selector up to end playback.  
Adjust Press the selector left or right to adjust play-  
speed back speed during playback.  
Press MENU/OK to pause playback and dis-  
play volume controls. Press the selector  
Adjust  
up or down to adjust the volume and  
volume  
press MENU/OK to exit. Volume can also be  
adjusted from the setup menu.  
69  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on TV  
Connect the camera to a TV to show pictures to a group.  
Turn the camera off.  
1
2
Connect the camera using the supplied A/V cable or an HDMI cable available from third party sup-  
pliers.  
Connect white plug  
to audio-in jack  
Insert into A/V  
cable connector  
Connect yellow plug  
to video-in jack  
Insert into HDMI  
connector  
Insert into HDMI  
HDMI Mini connector  
connector  
HDMI  
AnHDMIcable(availablefromthird-partysuppliers;P107)canbeusedtoconnectthecameratoHighDefini-  
tion (HD) devices (playback only). The USB cable or optional A/V cable cannot be used while an HDMI cable  
is connected.  
70  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on TV  
Tune the television to the video or HDMI input channel. See the documentation supplied with the  
television for details.  
3
4
Turn the camera on and press the abutton. The camera monitor turns off and pictures and mov-  
ies are played back on the TV. Note that the camera volume controls have no effect on sounds  
played on the TV; use the television volume controls to adjust the volume.  
a
Image quality drops during movie playback.  
c
When connecting the cable, be sure the connectors are fully inserted.  
71  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Pictures via USB  
If the printer supports PictBridge, the camera can be connected directly to the printer and  
pictures can be printed without first being copied to a computer. Note that depending on  
the printer, not all the functions described below may be supported.  
Connecting the Camera  
Printing Selected Pictures  
Connect the supplied USB cable as shown and  
Press the selector left or right to display a pic-  
1
1
turn the printer on.  
ture you wish to print.  
Press the selector up or down to choose the  
number of copies (up to 99).  
2
Repeat steps 1–2 to select additional pictures.  
Press MENU/OK to display a confirmation dialog  
when settings are complete.  
3
Turn the camera on. t USB will be displayed  
in the monitor, followed by the PictBridge dis-  
play shown below at right.  
PRINT THESE FRAMES  
2
TOTAL:  
9
SHEETS  
USB  
YES  
CANCEL  
Press MENU/OK to start printing.  
4
SET  
72  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Pictures via USB  
b Printing the Date of Recording  
Printing the DPOF Print Order  
To print the print order created with KPRINT  
ORDER (DPOF) in the playback menu (P97):  
To print the date of recording on pictures, press DISP/  
BACK in steps 1–2 to display the PictBridge menu (see  
“Printing the DPOF Print Order,” below). Press the se-  
lector up or down to highlight PRINT WITH DATE s  
and press MENU/OK to return to the PictBridge display  
(to print pictures without the date of recording, select  
PRINT WITHOUT DATE).  
In the PictBridge display, press DISP/BACK to  
open the PictBridge menu.  
1
PICTBRIDGE  
PRINT WITH DATE  
PRINT WITHOUT DATE  
PRINT DPOF  
a
If no pictures are selected when the MENU/OK button is  
pressed, the camera will print one copy of the current  
picture.  
Press the selector up or down to highlight  
u PRINT DPOF.  
2
Press MENU/OK to display a confirmation dialog.  
3
TOTAL:  
9
SHEETS  
YES  
CANCEL  
73  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Pictures via USB  
a
Press MENU/OK to start printing.  
4
• Pictures can be printed from internal memory or a  
memory card that has been formatted in the camera.  
• If the printer does not support date printing, the  
PRINT WITH DATE s option will not be available in  
the PictBridge menu and the date will not be printed  
on the pictures in the DPOF print order.  
• When pictures are printed via direct USB connection,  
page size, print quality, and border selections are  
made using the printer.  
During Printing  
The message shown at right  
is displayed during printing.  
Press DISP/BACK to cancel be-  
fore all pictures are printed  
(depending on the printer,  
printing may end before the  
current picture has printed).  
PRINTING  
CANCEL  
If printing is interrupted, turn the camera off and then  
on again.  
Disconnecting the Camera  
Confirm that “PRINTING” is not displayed in the moni-  
tor and turn the camera off. Disconnect the USB  
cable.  
74  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Pictures via USB  
Creating a DPOF Print Order  
The KPRINT ORDER (DPOF) option in the  
playback menu can be used to create a digital  
“print order” for PictBridge-compatible printers  
(P107) or devices that support DPOF.  
WITH DATE s/ WITHOUT DATE  
Select playback mode and press MENU/OK to  
display the playback menu.  
1
2
3
Highlight KPRINT ORDER (DPOF) and press  
MENU/OK.  
DPOF  
DPOF (Digital Print Order Format) is a stan-  
dard that allows pictures to be printed from  
“print orders” stored in internal memory or  
on a memory card. The information in the  
order includes the pictures to be printed, date im-  
print, and the number of copies of each picture.  
Highlight one of the following options and  
press MENU/OK:  
WITH DATE s: Print the date of recording on  
pictures.  
WITHOUT DATE: Do not print the date of record-  
ing on pictures.  
Press the selector left or right to display a pic-  
ture you wish to include in or remove from the  
print order.  
4
75  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Pictures via USB  
Press the selector up or down to choose the  
number of copies (up to 99). To remove a pic-  
ture from the order, press the selector down  
until the number of copies is 0.  
Repeat steps 4–5 to complete the print order.  
Press MENU/OK to save the print order when set-  
tings are complete, or DISP/BACK to exit without  
changing the print order.  
5
6
7
The total number of prints is displayed in the  
monitor. Press MENU/OK to exit.  
Total number of prints  
Number of copies  
The pictures in the current  
print order are indicated by a  
u icon during playback.  
b Intelligent Face Detection  
If the current picture was created with Intelligent  
Face Detection, pressing g sets the number of  
copies to the number of faces detected.  
a
When pictures are printed via direct USB connec-  
tion, page size, print quality, and border selections  
are made using the printer.  
76  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Printing Pictures via USB  
a
RESET ALL  
• Remove the memory card to create or modify a print  
order for the pictures in internal memory.  
• Print orders can contain a maximum of 999 pictures.  
• If a memory card is inserted  
containing a print order cre-  
ated by another camera, the  
message shown at right will  
be displayed. Pressing MENU/  
OK cancels the print order; a  
To cancel the current print  
order, select RESET ALL  
in the KPRINT ORDER  
(DPOF) menu. The confir-  
mation shown at right will  
YES  
CANCEL  
be displayed; press MENU/OK to remove all pictures  
from the order.  
YES  
NO  
new print order must be created as described above.  
77  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on a Computer  
The supplied software can be used to copy pictures to a computer, where they can be stored, viewed,  
organized, and printed. Before proceeding, install the software as described below. Do NOT connect the  
camera to the computer until installation is complete.  
Windows: Installing MyFinePix Studio  
Confirm that the computer meets the following system requirements:  
1
Windows 7 (SP 1)/Windows Vista (SP 2) 1  
3GHz Pentium 4 or better  
Windows XP (SP 3) 1  
2GHz Pentium 4 or better  
(2.4GHz Core 2 Duo or better)2  
512MB or more  
CPU  
(2.4GHz Core 2 Duo or better)2  
RAM  
Free disk space  
GPU  
1GB or more  
(1GB or more)2  
2GB or more  
Supports DirectX 9 or later  
Supports DirectX 7 or later  
(recommended)  
(required; performance not guaranteed with other GPUs)  
Video  
1,024×768 pixels or more with 24-bit color or better  
• Built-in USB port recommended. Operation is not guaranteed with other USB ports.  
• .NET Framework 3.5 Service Pack 1 required when uploading images or using Map Viewer.  
• Internet connection (broadband recommended) required to install .NET Framework (if necessary), to use  
auto update feature, and when performing such tasks as sharing pictures on-line or via e-mail.  
Other  
1 Other versions of Windows are not supported. Only pre-installed operating systems are supported; operation is not  
guaranteed on home-built computers or computers that have been upgraded from earlier versions of Windows.  
2 Recommended when displaying HD movies.  
78  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on a Computer  
Start the computer. Log in to an account with administrator privileges before proceeding.  
2
3
Exit any applications that may be running and insert the installer CD in a CD-ROM drive.  
Windows 7/Windows Vista  
If an AutoPlay dialog is displayed, click SETUP.EXE. A “User Account Control” dialog will then be displayed;  
click Yes (Windows 7) or Allow (Windows Vista).  
The installer will start automatically; click Install MyFinePix Studio and follow the on-screen in-  
structions to install MyFinePix Studio.  
If the Installer Does Not Start Automatically  
If the installer does not start automatically, select Computer or My Computer from the Start menu, then  
double-click the FINEPIX CD icon to open the FINEPIX CD window and double-click setup or SETUP.EXE.  
If prompted to install Windows Media Player or DirectX, follow the on-screen instructions to com-  
plete installation.  
4
5
Remove the installer CD from the CD-ROM drive when installation is complete. Store the installer  
CD in a dry location out of direct sunlight in case you need to re-install the software.  
Installation is now complete. Proceed to “Connecting the Camera” on page 82.  
79  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on a Computer  
Macintosh: Installing FinePixViewer  
Confirm that the computer meets the following system requirements:  
1
CPU  
PowerPC or Intel (Core 2 Duo or better)*  
Pre-installed versions of Mac OS X version 10.3.9–10.6  
OS  
(visit http://www.fujifilm.com/support/digital_cameras/compatibility/ for more information)  
Mac OS X version 10.7 and later not supported.  
RAM  
256MB or more (1GB or more)*  
Free disk space A minimum of 200MB required for installation with 400MB available when FinePixViewer is running  
Video  
Other  
800×600 pixels or more with thousands of colors or better  
Built-in USB port recommended. Operation is not guaranteed with other USB ports.  
* Recommended when displaying HD movies.  
After starting the computer and quitting any applications that may be running, insert the installer  
CD in a CD-ROM drive and double-click Installer for Mac OS X.  
2
3
An installer dialog will be displayed; click Installing FinePixViewer to start installation. Enter an  
administrator name and password when prompted and click OK, then follow the on-screen instruc-  
tions to install FinePixViewer. Click Exit to quit the installer when installation is complete.  
80  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on a Computer  
Remove the installer CD from the CD-ROM drive. Note that you may be unable to remove the CD  
if Safari is running; if necessary, quit Safari before removing the CD. Store the installer CD in a dry  
location out of direct sunlight in case you need to re-install the software.  
4
5
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture, and select Preferences…  
from the Image Capture application menu. The Image Capture preferences dialog will be displayed;  
choose Other… in the When a camera is connected, open menu, then select FPVBridge in the  
“Applications/FinePixViewer” folder and click Open. Quit Image Capture.  
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications” folder and start Image  
Capture. The camera will be listed under DEVICES; select the camera and choose FPVBridge from  
the Connecting this camera opens menu and click Choose. Quit Image Capture.  
Installation is now complete. Proceed to “Connecting the Camera” on page 82.  
81  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on a Computer  
Connecting the Camera  
If the pictures you wish to copy are stored on a  
memory card, insert the card into the camera  
(P12).  
Turn the camera on and follow the on-screen  
instructions to copy pictures to the computer.  
To exit without copying pictures, click Cancel.  
1
3
a
Windows users may require the Windows CD when  
starting the software for the first time.  
For more information on using the supplied soft-  
ware, start the application and select the appro-  
priate option from the Help menu.  
c
Loss of power during transfer could result in loss of  
data or damage to internal memory or the memory  
card. Insert fresh or fully-charged batteries before  
connecting the camera.  
Turn the camera off and connect the supplied  
2
USB cable as shown, making sure the connec-  
tors are fully inserted. Connect the camera di-  
rectly to the computer; do not use a USB hub  
or keyboard.  
82  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing Pictures on a Computer  
c
Disconnecting the Camera  
• If a memory card containing a large number of images  
is inserted, there may be a delay before the software  
starts and you may be unable to import or save im-  
ages. Use a memory card reader to transfer pictures.  
• Make sure that the computer does not display a mes-  
sage stating that copying is in progress and that the  
indicator lamp is out before turning the camera off or  
disconnecting the USB cable (if the number of imag-  
es copied is very large, the indicator lamp may remain  
lit after the message has cleared from the computer  
display). Failure to observe this precaution could re-  
sult in loss of data or damage to internal memory or  
the memory card.  
After confirming that the indicator lamp is out, follow  
the on-screen instructions to turn the camera off and  
disconnect the USB cable.  
Uninstalling the Supplied Software  
Only uninstall the supplied software when it is no lon-  
ger required or before beginning reinstallation. After  
quitting the software and disconnecting the camera,  
drag the “FinePixViewer” folder from “Applications”  
into the Trash and select Empty Trash in the Finder  
menu (Macintosh), or open the control panel and use  
“Programs and Features” (Windows 7/Windows Vista)  
or “Add or Remove Programs” (Windows XP) to unin-  
stall MyFinePix Studio. Under Windows, one or more  
confirmation dialogs may be displayed; read the con-  
tents carefully before clicking OK.  
• Disconnect the camera before inserting or removing  
memory cards.  
• In some cases, it may not be possible to access pictures  
saved to a network server using the supplied software  
in the same way as on a standalone computer.  
• The user bears all applicable fees charged by the  
phone company or Internet service provider when  
using services that require an Internet connection.  
83  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Shooting Mode  
Use the shooting menus to adjust shooting set-  
tings. The options available vary with the shoot-  
ing mode selected.  
Shooting Menu Options  
Default values are shown in square brackets [ ].  
AE MODE  
Choose an option for E mode (P23).  
[R]  
Using the Shooting Menu  
Press MENU/OK to display the shoot-  
ing menu.  
1
AAdv. MODE  
[i]  
Choose an advanced shooting mode (P24).  
SCENE POSITION [SP1:L] [SP2:M]  
Choose a scene for SP1/SP2 mode (P28).  
Press the selector up or down to  
highlight the desired menu item.  
2
A
Press the selector right to display op-  
tions for the highlighted item.  
3
NISO  
[AUTO (800)]  
Control the camera’s sensitivity to light (P51).  
Press the selector up or down to  
highlight the desired option.  
4
Press MENU/OK to select the high-  
lighted option.  
5
Press DISP/BACK to exit from the  
menu.  
6
84  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Shooting Mode  
OIMAGE SIZE  
[O 4 : 3] TIMAGE QUALITY  
[FINE]  
O 4 : 3  
Choose the image size and  
aspect ratio at which pictures  
are recorded. Large pictures  
Choose how much image files are compressed.  
Option  
FINE  
Description  
Size  
Aspect ratio  
Low compression. Select for higher image  
quality.  
can be printed at large sizes with no drop in qual-  
ity, while small pictures require less memory, al-  
lowing more pictures to be recorded.  
High compression. Select this option to  
store more pictures.  
NORMAL  
Size Versus Aspect Ratio  
Size  
Option  
O
Prints at sizees up to  
34×25cm (13.5×10 in.)  
24×18 cm (9.5×7 in.)  
17×13 cm (7 × 5 in.)  
P
Q
Aspect ratio  
4 : 3: Pictures have 3 : 2: Pictures have 16 : 9: Suited for  
the same propor- the same propor- display on High  
tions as the cam- tions as a frame of Definition (HD) de-  
era display.  
35 mm film.  
vices.  
2
9
3
3
16  
4
85  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Shooting Mode  
UDYNAMIC RANGE  
[AUTO] PFILM SIMULATION  
[c]  
Control contrast. Higher values are recommend- Simulate the effects of different types of film, in-  
ed for scenes that include both sunlight and deep cluding sepia and black-and-white.  
shade or for increased contrast with such subjects  
as sunlight on water, brightly-lit autumn leaves,  
portraits taken against a blue sky, and white ob-  
jects or people wearing white; note, however, that  
mottling may appear in pictures taken at higher  
values. If AUTO is selected, the camera will auto-  
matically select values between 100% and 400%  
in response to shooting conditions.  
Option  
Description  
Standard color reproduction. Suited to a  
wide range of subjects, from portraits to  
landscapes.  
c PROVVIA/  
STANDARD  
d Velvia/ A high-contrast palette of saturated col-  
VIVID  
ors, suited to nature photographs.  
e ASTIA/ A soft-toned palette of less saturated col-  
SOFT  
b B&W  
f SEPPIA  
ors.  
Take pictures in black and white.  
Take pictures in sepia.  
Option  
A 100%  
Description  
Increase contrast when shooting  
indoors or under overcast skies.  
AUTO B 200%  
C 4000%  
Reduce loss of detail in highlights  
and shadows when photograph-  
ing high-contrast scenes.  
D 800%  
M 1600%  
a
M 1600% and D 800% are available only when  
D-RANGE PRIORITY is selected in E mode.  
86  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Shooting Mode  
dWB SHIFT  
yINTELLIGENT SHARPNESS  
[OFF]  
White balance can be fine-tuned. Adjust the se- Select ON to process photos digitally for sharp,  
lected color axis (R–Cy=Red-Cyan or B-Ye=Blue– super high-resolution results.  
Yellow) by +3 to –3 in increments of one.  
a
• The time needed to record images increases.  
• The effects are not visible in the display during shoot-  
fCOLOR  
Adjust color density (HIGH/MID/LOW).  
[MID]  
[STD]  
[STD]  
ing.  
• Intelligent sharpness may turn off automatically in  
some modes.  
• This option has no effect on photos taken in continu-  
ous mode.  
eTONE  
Adjust contrast (HARD/STD/SOFT).  
q SHARPNESS  
RINTELLIGENT DIGITAL ZOOM  
[OFF]  
Choose whether to sharpen or soften outlines  
(HARD/STD/SOFT).  
Intelligent digital zoom can be used to magnify  
the image by 1.4× or 2× while processing it for  
sharp, high-resolution results.  
h NOISE REDUCTION  
Choose the amount of noise reduction (HIGH/  
STD/LOW).  
[STD]  
a
• Intelligent digital zoom may end when another mode  
is selected.  
• Intelligent digital zoom may sometimes produce low-  
er quality images than optical zoom.  
• The time needed to record images increases.  
• The effects are not visible in the display during shoot-  
ing.  
• Intelligent digital zoom is not available in continuous  
mode or during movie recording.  
87  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Shooting Mode  
ZADVANCED ANTI BLUR  
Select ON to enable advanced anti blur in R  
mode (P24).  
[ON] a STILL SHOOTING IN MOVIE  
[MOVIE PRIORITY]  
Choose how the camera records photographs  
taken during movie recording (P68).  
bFACE DETECTION  
Option  
Description  
Choose whether the camera automatically de-  
tects and sets focus and exposure for human por-  
trait subjects (P54).  
The camera takes a photograph without  
interrupting movie recording. Image size  
MOVIIEE  
PRIORITY is determined by the option selected for  
WMOVIE MODE.  
nFACE RECOGNITION  
The camera interrupts filming to take the  
photograph and resumes filming automati-  
Add portrait subjects to the face recognition da-  
tabase. These subjects will be given priority dur-  
ing Intelligent Face Detection, and their names  
and other information can be viewed during  
playback (P55).  
STILL  
IMAGE  
cally when recording is complete. Image  
size is determined by the option selected  
PRIORITY for OIMAGE SIZE, but note that the pho-  
tograph will be recorded at size Pif Ois  
selected.  
WMOVIE MODE  
[i]  
Choose a frame size for movies (P68).  
88  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Shooting Mode  
1
/
JAE BKT EV STEPS  
[
3] gEXTERNAL FLASH  
[OFF]  
Choose the size of the exposure bracketing incre- Choose ON when using an optional flash unit (ex-  
ment used when O (AE bracketing) is selected in cept Fujifilm products) mounted on the camera  
continuous shooting mode (P45).  
hot shoe.  
1
2
/
/
3 EV, and  
Choose from increments of  
3 EV,  
c
• The flash may not fully light the subject at speeds  
1EV (note that the camera may not be able to  
use the selected bracketing increment if the  
amount of over- or under- exposure exceeds the  
limits of the exposure metering system).  
faster than 1 1000 s.  
/
• Use auto or custom white balance (P52).  
• If the built-in flash is raised when ON is selected for  
gEXTERNAL FLASH, the built-in flash will fire once  
to provide a signal for the optional flash unit to fire.  
• External flash units can be used in P, S, A, M or O  
(S and T only) modes.  
IFLASH  
[ 0]  
Adjust flash brightness. Choose from values be-  
2
2
/
/
tween + 3 EV and – 3 EV. The default setting is 0.  
Note that the desired results may not be achieved  
depending on shooting conditions and the dis-  
tance to the subject.  
• Fujifilm external flash units do not require this setting.  
a
• The camera can be used with flash units that provide  
aperture adjustment, external metering, and sensitiv-  
ity control. Some flash units that are designed spe-  
cifically for other cameras can not be used.  
• For information on Fujifilm external flash units, see  
Accessories from FUJIFILM (P108).  
89  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Shooting Mode  
KCUSTOM SET  
Save settings for P, S, A, M and all O modes  
except R (P35).  
90  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Playback Mode  
Using the Playback Menu  
Playback Menu Options  
Press the a button to enter play-  
back mode.  
1
XPHOTOBOOK ASSIST  
Create books from your favorite photos (P64).  
Press MENU/OK to display the play-  
back menu.  
2
xERASE  
Delete all or selected pictures (P61).  
Press the selector up or down to  
highlight the desired menu item.  
3
Press the selector right to display op-  
tions for the highlighted item.  
4
Press the selector up or down to  
highlight the desired option.  
5
Press MENU/OK to select the high-  
lighted option.  
6
Press DISP/BACK to exit from the  
menu.  
7
91  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Playback Mode  
jMARK FOR UPLOAD TO  
Select pictures for upload to YouTube or Face-  
book using MyFinePix Studio (Windows only).  
RESEETT ALLLL:: DDeesseelleeccttiinngg All Pictures  
Choose RESET ALL to deselect all pictures. If the  
number of pictures affected is very large, a mes-  
sage will be displayed while the operation is in  
progress. Press DISP/BACK to exit before the opera-  
tion is complete.  
Selecting Pictures for Uppload  
Select YouTube to choose movies for upload  
to YouTube, FACEBOOK to choose photos and  
movies for upload to Facebook.  
1
Uploadinng Picturees (Windoows Only)  
Selected pictures can be uploaded using the  
YouTube/Facebook Upload option in MyFinePix  
Studio.  
Press the selector left or right to display pic-  
2
tures and press MENU/OK to select or deselect.  
Press DISP/BACK to exit when all the desired pic-  
tures are selected.  
Select with camera  
a
• Only movies can be selected for upload to YouTube.  
• During playback, selected pictures are indicated by  
jYouTube or jFACEBOOK icons.  
Upload from computer  
For information on installing MyFinePix Studio  
and connecting the camera to a computer, see  
“Viewing Pictures on a Computer” (P78).  
92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Playback Mode  
ISLIDE SHOW  
View pictures in an automated slide show. Choose If the current picture is marked with a gicon to  
the type of show and press MENU/OK to start. indicate that it was taken with Intelligent Face De-  
[MULTIPLE] BRED EYE REMOVAL  
Press DISP/BACK at any time during the show to tection, this option can be used to remove red-  
view on-screen help. The show can be ended at eye. The camera will analyze the image; if red-eye  
any time by pressing MENU/OK.  
is detected, the image will be processed to create  
a copy with reduced red-eye.  
Option  
Description  
Press selector left or right to go back or  
skip ahead one frame. Select FADE-IN  
for fade transitions between frames.  
As above, except that camera automati-  
cally zooms in on faces selected with In-  
telligent Face detection.  
NORMAL  
Display the desired picture.  
1
FADE-IN  
Select BRED EYE REMOVAL in the playback  
menu.  
2
NORMAL g  
FADE-IN g  
MULLTTIIPPLE  
a
Press MENU/OK.  
3
Display several pictures at once.  
a
• Red-eye may not be removed if the camera is unable  
to detect a face or the face is in profile. Results may  
differ depending on the scene. Red-eye can not be  
removed from pictures that have already been pro-  
cessed using red-eye removal or pictures created  
with other devices.  
The camera will not turn off automatically while a slide  
show is in progress.  
• The amount of time needed to process the image  
varies with the number of faces detected.  
• Copies created with BRED EYE REMOVAL are indi-  
cated by a eicon during playback.  
93  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Playback Mode  
DPROTECT  
GCROP  
Protect pictures from accidental deletion.  
Create a cropped copy of the current picture.  
Select DPROTECT in the playback menu.  
Display the desired picture.  
1
2
1
Highlight one of the following options and  
press MENU/OK:  
FRAME: Protect selected pictures. Press the  
selector left or right to view pictures and  
press MENU/OK to select or deselect. Press  
DISP/BACK when the operation is complete.  
SET ALL: Protect all pictures.  
Select GCROP in the playback menu.  
2
Use the kand nbuttons to zoom the image  
in and out and use the selector to scroll the  
picture until the desired portion is displayed.  
3
Press MENU/OK to display a confirmation dialog.  
4
5
a
Press MENU/OK again to save the cropped copy  
to a separate file.  
RESET ALL: Remove protection from all pic-  
tures.  
c
Protected pictures will be deleted when the memory  
card or internal memory is formatted (P100).  
Larger crops produce larger copies; all copies have an  
aspect ratio of 4:3. If the size of the final copy will be  
a, OK will be displayed in yellow.  
b Intelligent Face Detection  
If the picture was shot with Intelligent Face Detection  
(P54), gwillbedisplayedinthemonitor. Presstheg  
button to zoom in on the selected face.  
94  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Playback Mode  
ORESIZE  
CIMAGE ROTATE  
Create a small copy of the current picture.  
Rotate pictures taken in tall orientation so that  
they are displayed in tall orientation in the LCD  
monitor.  
Display the desired picture.  
1
Select ORESIZE in the playback menu.  
2
Display the desired picture.  
1
2
Highlight a size and press MENU/OK to display a  
confirmation dialog.  
3
Select CIMAGE ROTATE in the playback  
menu.  
Press MENU/OK to save the resized copy to a  
separate file.  
4
a
Press the selector down to rotate the picture  
90° clockwise, up to rotate it 90° counterclock-  
wise.  
3
The sizes available vary with the size of the original im-  
age.  
Press MENU/OK. The picture automatically be  
displayed in the selected orientation when-  
ever it is played back on the camera.  
4
a
• Protected pictures can not be rotated. Remove pro-  
tection before rotating pictures (P94).  
• The camera may not be able to rotate pictures cre-  
ated with other devices.  
95  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Playback Mode  
ECOPY  
FVOICE MEMO  
Copy pictures from internal memory to a memory Add a voice memo to the current photograph.  
card.  
Holding the camera at a distance of about 20 cm,  
face the microphone and press MENU/OK to begin  
recording. Press MENU/OK again to end recording  
Select ECOPY in the playback menu.  
1
2
Highlight one of the following options and (recording ends automatically after 30 seconds).  
press the selector right:  
a
aINTERNAL MEMORY ybCARD: Copy pic-  
tures from internal memory to a memory  
card.  
• Voice memos can not be added to movies or protect-  
ed pictures. Remove protection from pictures before  
recording voice memos.  
• If a voice memo already exists for the current picture,  
the options will be displayed. Select RE-REC to re-  
place the existing memo.  
bCARD yaINTERNAL MEMORY: Copy pic-  
tures from a memory card to internal mem-  
ory.  
Playing Voice Memos  
Highlight one of the following options and  
press MENU/OK:  
FRAME: Copy selected pictures. Press the se-  
lector left or right to view pictures and press  
MENU/OK to copy the current picture.  
ALL FRAMES: Copy all pictures.  
3
Pictures with voice memos are indicated by a qicon  
during playback. To play the voice memo back, select  
PLAY for FVOICE MEMO in the playback menu.  
a
• The camera may not play voice memos recorded  
with other devices.  
• Do not cover the speaker during playback.  
a
• Copying ends when the destination is full.  
• DPOF print information is not copied (P75).  
96  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using the Menus: Playback Mode  
nERASE FACE RECOG.  
JDISP. ASPECT  
[4 : 3]  
Remove face recognition links from the current Choose how High Definition (HD) devices display  
image. When this option is selected, the camera pictures with an aspect ratio of 4 : 3 (this option is  
will zoom in on an area in the current picture that available only when an HDMI cable is connected).  
it has matched with a face in the face recognition Select 16 : 9 to display the image so that it fills the  
database. If the match is not correct, press MENU/ screen with its top and bottom cropped out, 4 : 3  
OK to remove the link to the face recognition da- to display the entire image with black bands at  
tabase.  
either side.  
a
Face recognition links can not be removed from copies  
with a size of aor smaller.  
KPRINT ORDER (DPOF)  
16 : 9  
4 : 3  
Select pictures for printing on DPOF- and Pict-  
Bridge-compatible devices (P73).  
a
Photographs with an aspect ratio of 16 : 9 are displayed  
full screen, those with an aspect ratio of 3:2 in a black  
frame.  
97  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
Using the Setup Menu  
Display the setup menu.  
Adjust settings.  
1 1.1 Press  
2 2.1 Press the selector right to acti-  
MENU/OK to display the  
menu for the current mode.  
vate the setup menu.  
1.2 Press the selector left to high-  
2.2 Press the selector up or down  
light a left tab.  
to highlight a menu item.  
1.3 Press the selector up or down  
to select 4.  
2.3 Press the selector right to dis-  
play options for the highlighted  
item.  
The setup menu appears.  
2.4 Press the selector up or down  
to highlight an option.  
Tab  
2.5 Press MENU/OK to select the  
highlighted option.  
2.6 Press DISP/BACK to exit from the  
menu.  
98  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
Setup Menu Options  
Default values are shown in square brackets [ ].  
Option  
h HOME  
Description  
Switch to the time currently selected  
for FDATE/TIME (see above).  
Switch to local time. If this option is  
selected, g and the time and date  
will be displayed in yellow for three  
seconds each time the camera is  
turned on.  
FDATE/TIME  
Set the camera clock (P16).  
NTIME DIFFERENCE  
[h]  
g LOCAL  
Switch the camera clock instantly from your  
home time zone to the local time at your desti-  
nation when traveling. To specify the difference  
between local time and your home time zone:  
La  
Choose a language.  
Highlight g LOCAL and press the selector  
right.  
1
oSILENT MODE  
[OFF]  
Select ON to disable the speaker, flash, and AF-  
assist illuminator in situations in which camera  
sounds or lights may be unwelcome (note that  
the flash will still fire in Cmode).  
Use the selector to choose the time difference  
between local time and your home time zone.  
2
Press MENU/OK.  
3
To switch between local time and your home  
time zone, highlight g LOCAL or h HOME and  
press MENU/OK.  
99  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
RRESET  
AIMAGE DISP.  
[1.5 SEC]  
Reset all settings except FDATE/TIME, NTIME Choose how long pictures are displayed in the  
DIFFERENCE, OBACKGROUND COLOR, and LCD monitor after shooting.  
QVIDEO SYSTEM to default values.  
Option  
Description  
Pictures are displayed for three sec-  
onds (3 SEC) or 1.5 seconds (1.5 SEC).  
Colors may differ slightly from those  
in the final image.  
Highlight RRESET and press the selector  
right to display a confirmation dialog.  
3 SEC  
1
1.5 SEC  
ZOOM  
Highlight OK and press MENU/OK.  
2
Pictures are displayed until the MENU/  
KFORMAT  
(CONTINUOUS) OK button is pressed.  
Pictures are not displayed after  
shooting.  
If a memory card is inserted in the camera, this  
option will format the memory card. If no memo-  
ry card is inserted, this option will format internal  
memory.  
OFF  
c
• All data—including protected pictures—will be de-  
leted from the memory card or internal memory. Be  
sure important files have been copied to a computer  
or other storage device.  
• Do not open the battery-chamber cover during for-  
matting.  
100  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
a
• If the frame number reaches 999-9999, the shutter  
release will be disabled (P118).  
• Selecting RRESET (P100) sets BFRAME NO. to  
CONTINUOUS but does not reset the file number.  
• Frame numbers for pictures taken with other cam-  
eras may differ.  
BFRAME NO.  
[CONT.]  
Frame number  
Newpicturesarestoredinim-  
age files named using a four-  
digit file number assigned  
by adding one to the last file  
number used. The file num-  
ber is displayed during play-  
back as shown at right. BFRAME NO. controls  
whether file numbering is reset to 0001 when a  
new memory card is inserted or the current mem-  
ory card or internal memory is formatted.  
100-0001  
Directory  
number  
File  
number  
GOPERATION VOL.  
[c]  
Adjust the volume of the sounds produced when  
camera controls are operated. Choose e OFF  
(mute) to disable control sounds.  
Option  
Description  
HSHUTTER VOLUME  
[c]  
Numbering continues from the last  
file number used or the first avail-  
able file number, whichever is higher.  
Choose this option to reduce the  
number of pictures with duplicate  
file names.  
Numbering is reset to 0001 after for-  
matting or when a new memory card  
is inserted.  
Adjust the volume of the sounds produced when  
the shutter is released. Choose e OFF (mute) to  
disable the shutter sound.  
CONTINUOUS  
eSHUTTER SOUND  
[i]  
Choose the sound made by the shutter.  
RENEW  
101  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
IPLAYBACK VOLUME  
[7]  
1QUICK START MODE  
[OFF]  
Adjust the volume for movie and voice memo  
playback.  
Allow the camera to restart in a fast manner after  
turned off (24MIN/10 MIN/OFF). After specified  
time has passed, the camera will discontinue this  
option.  
JLCD BRIGHTNESS  
[0]  
Control the brightness of the display.  
c
This option will increase drain on the battery.  
TMONITOR SUNLIGHT MODE  
[OFF]  
Select ON to make the display in the monitor eas-  
ier to read in bright light.  
FFn BUTTON  
Choose the role played by the Fn button (P53).  
[R]  
EEVF/LCD MODE  
[30fps]  
Choose 30 fps to increase battery life, 50 fps for  
improved display quality.  
MAUTO POWER OFF  
[2 MIN]  
Choose the length of time before the camera  
turns off automatically when no operations are  
performed. Shorter times increase battery life; if  
OFF is selected, the camera must be turned off  
manually. Note that in some situations the cam-  
era turns off automatically even when OFF is se-  
lected.  
102  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
LDUAL IS MODE  
[L] BRED EYE REMOVAL  
[ON]  
Choose from the following image stabilization Choose ON to remove red-eye effects caused by  
options:  
the flash when shooting with Intelligent Face De-  
tection.  
Description  
Option  
L
Image stabilization on. If + MOTION  
is selected, the camera will adjust  
shutter speed to reduce motion blur  
when a moving objects are detected.  
As above, except that image stabili-  
zation is performed only when the  
shutter button is pressed halfway or  
the shutter is released.  
a
Red-eye reduction is performed only when a face is  
detected.  
CONTINUOUS +  
MOTION  
l CONTINUOUS  
M SHOOTING  
+ MOTION  
CAF ILLUMINATOR  
[ON]  
If ON is selected, the AF-assist illuminator will light  
to assist autofocus.  
m
SHOOTING ONLY  
c
Image stabilization off. Choose this  
option when using a tripod.  
OFF  
• The camera may be unable to focus using the AF-as-  
sist illuminator in some cases. If the camera is unable  
to focus in macro mode, try increasing the distance to  
the subject.  
• Avoid shining the AF-assist illuminator directly into  
your subject’s eyes.  
c
+ MOTION has no effect when sensitivity is set to a  
fixed value, and may also be unavailable at some other  
combinations of settings. The effect may vary with  
lighting conditions and the speed at which the object  
is moving.  
103  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
kAE/AF-LOCK MODE  
[P] jFOCUS CHECK  
[ON]  
If AE&AF ON WHEN PRESSING is selected, ex- If ON is selected, the image will be magnified in  
posure and/or focus will lock while the AE/AF LOCK the display to assist focus when the focus ring is  
button is pressed. If AE&AF ON/OFF SWITCH is rotatedinmanualfocusmode(P48). Thecamera  
selected, exposure and/or focus will lock while the must be in manual focus mode.  
AE/AF LOCK button is pressed and remain locked  
tSAVE ORG IMAGE  
Choose ON to save unprocessed copies of seam-  
less z panoramas or pictures taken using  
[OFF]  
until the button is pressed again (P37).  
vAE/AF-LOCK BUTTON  
[AE-L]  
Choose whether the AE/AF LOCK button locks only B RED EYE REMOVAL, jPRO LOW-LIGHT  
exposure, only focus, or both exposure and focus MODE, or iPRO FOCUS MODE.  
(AE-L /AF-L /AE+AF).  
104  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
mAUTOROTATE PB  
[ON] QVIDEO SYSTEM  
Choose ON to automatically rotate “tall” (portrait- Choose a video mode for connection to a TV.  
orientation) pictures during playback.  
Option  
NTSC  
Description  
Select this mode for connection to  
video devices in North America, the  
Caribbean, parts of Latin America,  
and some East Asian countries.  
Select this mode for connection to  
video devices in the United Kingdom  
and much of Europe, Australia, New  
Zealand, and parts of Asia and Africa.  
OBACKGROUND COLOR  
Choose a color scheme.  
cGUIDANCE DISPLAY  
Choose whether to display tool tips.  
[ON]  
PAL  
SCUSTOM RESET  
Reset all settings for mode C. A confirmation  
dialog will be displayed, press the selector up or  
down to highlight OK and press MENU/OK.  
TBATTERY TYPE  
[x]  
Specify the type of battery used in the camera  
(P11).  
105  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The Setup Menu  
PDISCHARGE (Ni-MH Batteries Only)  
UDATE STAMP  
[OFF]  
The capacity of rechargeable Ni-MH batteries may Stamp the time and/or date of recording on pho-  
be temporarily reduced when new, after long pe- tographs as they are taken.  
riods of disuse, or if they are repeatedly recharged  
before being fully discharged. Capacity can be  
increased by repeatedly discharging the batteries  
using the PDISCHARGE option and recharging  
them in a battery charger (sold separately). Do  
not use PDISCHARGE with non-rechargeable  
batteries, and note that the batteries will not dis-  
charge if the camera is powered by an optional  
AC power adapter and DC coupler.  
Option  
Description  
Stamp new photographs with the  
date and time of recording.  
Stamp new photographs with the  
date of recording.  
Do not stamp the time and date on  
new photographs.  
R+S  
R
OFF  
c
• Time and date stamps can not be deleted. Turn  
U DATE STAMP off to prevent time and date  
stamps appearing on new photographs.  
• If the camera clock is not set, you will be prompted to  
set the clock to the current date and time (P16).  
• We recommend that you turn the DPOF “print date”  
option off when printing images with a time and date  
stamp (P75).  
Selecting PDISCHARGE displays a confirma-  
tion dialog. Press MENU/OK.  
1
Select OK.  
2
3
Press MENU/OK to begin discharging the batter-  
ies. When the batteries are fully discharged,  
the battery level indicator will blink red and  
the camera will turn off. To cancel the process  
before the batteries are fully discharged, press  
DISP/BACK.  
• Time and date stamps do not appear on movies, pan-  
oramas, or 3D photos.  
106  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Accessories  
The camera supports a wide range of accessories from FUJIFILM and other manufacturers.  
Remote Shuutter Release  
Audiioo//VVisual  
USB  
A/V cable  
Standard TV *  
HDMI cable  
HDTV *  
RR-80 remote release  
(sold separately)  
FINEPIX HS25EXR  
FINEPIX HS28EXR  
Protector Fiillteer  
PRF-58 protective filter  
(sold separately)  
Digital viewer  
Supports 3D display of pictures taken  
using INDIVD. SHUTTER 3D.  
Computeerr Related  
SD/SDHC/SDXC  
memory card  
USB  
FINEPIX REAL 3D V3  
(sold separately)  
SD card slot or card reader  
Printing  
USB  
Computer *  
PictBridge-compatible printer *  
Printer *  
* Available from third-party suppliers  
107  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Optional Accessories  
Accessories from FUJIFILM  
The following optional accessories are available from FUJIFILM. For the latest information on the acces-  
sories available in your region, check with your local FUJIFILM representative or visit http://www.fujifilm.  
com/products/digital_cameras/index.html.  
AC power adapterr AC-5VX (requires CP-04 DC coupler): Use for extended playback or when copying  
pictures to a computer (shape of adapter and plug vary with region of  
sale).  
DC cooupler  
CP-04: Connect the AC-5VX AC power adapter to the camera.  
Remote reelleases RR-80: Use to reduce camera shake or keep the shutter open during a  
time exposure.  
Lens hoooddss  
LH-HS10: Protect the lens and prevent glare and lens flare.  
Shoe-moounted  
flash units  
EF-20: This hot-shoe clip-on flash unit has a guide number of 20 (ISO 100),  
supports i-TTL, can be angled up to 90° for bounce-flash photography,  
and takes two AA 1.5 V batteries.  
EF-42: This hot-shoe clip-on flash unit has a guide number of 42 (ISO 100),  
features 24–105 mm auto zoom, supports i-TTL, can be angled up to 90°  
for bounce-flash photography, and takes four AA 1.5 V batteries.  
Prootteectoor Fiilter  
PRF-58: Protect the lens from scratches caused by sand, dust, and other  
foreign objects when shooting outdoors.  
108  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Caring for the Camera  
To ensure continued enjoyment of the product, observe the following precautions.  
Storraggee aanndd UUssee  
Condensation  
If the camera will not be used for an extended pe-  
riod, remove the battery and memory card. Do  
not store or use the camera in locations that are:  
• exposed to rain, steam, or smoke  
• very humid or extremely dusty  
• exposed to direct sunlight or very high tempera-  
tures, such as in a closed vehicle on a sunny day  
• extremely cold  
Sudden increases in temperature, such as occur  
when entering a heated building on a cold day,  
can cause condensation inside the camera. If this  
occurs, turn the camera off and wait an hour be-  
fore turning it on again. If condensation forms on  
the memory card, remove the card and wait for  
the condensation to dissipate.  
Clleeaniing  
• subject to strong vibration  
Use a blower to remove dust from the lens and  
monitor, then gently wipe with a soft, dry cloth.  
Any remaining stains can be removed by wiping  
gently with a piece of FUJIFILM lens-cleaning pa-  
per to which a small amount of lens-cleaning fluid  
has been applied. Care should be taken to avoid  
scratching the lens or monitor. The camera body  
can be cleaned with a soft, dry cloth. Do not use  
alcohol, thinner, or other volatile chemicals.  
• exposed to strong magnetic fields, such as near  
a broadcasting antenna, power line, radar emit-  
ter, motor, transformer, or magnet  
• in contact with volatile chemicals such as pesti-  
cides  
• next to rubber or vinyl products  
Wateerr aanndd SSandd  
Exposure to water and sand can also damage the  
camera and its internal circuitry and mechanisms.  
When using the camera at the beach or seaside,  
avoid exposing the camera to water or sand. Do  
not place the camera on a wet surface.  
Traveeling  
Keep the camera in your carry-on baggage.  
Checked baggage may suffer violent shocks that  
could damage the camera.  
109  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and Solutions  
Power and Battery  
Problem  
Solluution  
The batteries are exhausted: Insert fresh or fully-charged spare batteries (P9).  
The batteries are not in the correct orientation: Re-insert the batteries in the correct orientation (P9).  
The battery-chamber cover is not latched: Latch the battery-chamber cover (P9).  
The AC power adapter and DC coupler are not connected properly: Make sure that the AC power adapter  
and DC coupler are properly connected.  
The camera does not  
turn on.  
The camera has been left for an extended period with no batteries inserted and the AC power adapter/DC  
coupler unplugged: After inserting the batteries or connecting the AC power adapter/DC coupler,  
wait a few moments before turning the camera on.  
The batteries are cold: Warm the batteries by placing them in a pocket or other warm place and  
re-insert them in the camera immediately before taking a picture.  
There is dirt on the battery terminals: Clean the terminals with a soft, dry cloth.  
ON is selected for TMONITOR SUNLIGHT MODE: Select OFF to reduce the drain on the bat-  
tery (P4).  
The camera is in R mode Select another shooting mode (P22).  
xTRACKING is selected for FAF MODE: Select a different AF mode (P50).  
J is selected for focus mode: Select a different focus mode (P48).  
:
The batteries run down  
quickly.  
The batteries are new, have been left unused for an extended period, or have been recharged without  
first being fully discharged (rechargeable Ni-MH batteries only): Discharge Ni-MH batteries using the  
PDISCHARGE option and recharge them in a battery charger (sold separately). If the batteries  
do not hold a charge after repeated discharging and recharging, they have reached the end of  
their service life and must be replaced (P106).  
The batteries are exhausted: Insert fresh or fully-charged spare batteries (P9).  
The AC power adapter or DC coupler has been disconnected: Make sure that the AC power adapter and  
DC coupler are properly connected.  
The camera turns off  
suddenly.  
110  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and Solutions  
Menus and Displays  
Problem  
Menus and displays are  
not in English.  
Solluution  
Select ENGLISH for Qa (P16, 99).  
Shooting  
Problem  
Solluution  
Memory is full: Insert a new memory card or delete pictures (P12, 61).  
Memory is not formatted: Format the memory card or internal memory (P100).  
There is dirt on the memory card contacts: Clean the contacts with a soft, dry cloth.  
The memory card is damaged: Insert a new memory card (P12).  
The batteries are exhausted: Insert fresh or fully-charged spare batteries (P9).  
The camera has turned off automatically: Turn the camera on (P15).  
The indicator lamp was orange when you attempted to record a panorama: Wait until the indicator lamps  
turns off (P20).  
No picture is taken when  
the shutter button is  
pressed.  
The LCD monitor goes  
dark after shooting.  
The LCD monitor may darken while the flash charges. Wait for the flash to charge (P39).  
The subject is close to the camera: Select macro mode (P38).  
The subject is far away from the camera: Cancel macro mode (P38).  
The subject is not suited to autofocus: Use focus lock (P36).  
The camera does not  
focus.  
If Sis selected for OIMAGE SIZE in R mode, the camera will optimize not only sensitivity and  
other settings, but also image size. To record all pictures at the same size, choose another shooting  
mode or select another option for OIMAGE SIZE (P85).  
Pictures are not the same  
size.  
Macro mode is not avail-  
able.  
Choose a different shooting mode (P22).  
Intelligent Face Detection Intelligent Face Detection is not available in the current shooting mode: Choose a different shooting mode  
is not available.  
(P22).  
111  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and Solutions  
Problem  
Solluution  
The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions.  
The subject’s face occupies only a small area of the frame: Change the composition so that the sub-  
ject’s face occupies a larger area of the frame (P36).  
The subject’s head is tilted or horizontal: Ask the subject to hold their head straight.  
The camera is tilted: Keep the camera level (P18).  
No face is detected.  
The subject’s face is poorly lit: Shoot in bright light.  
Wrong subject is se-  
lected.  
The selected subject is closer to the center of the frame than the main subject. Recompose the  
picture or turn face detection off and frame the picture using focus lock (P36).  
The flash is lowered: Raise the flash (P39).  
The flash is not available in the current shooting mode: Choose a different shooting mode (P22).  
The camera is in super macro or continuous shooting mode: Turn super macro and continuous shooting  
modes off (P38).  
The flash does not fire.  
The batteries are exhausted: Insert fresh or fully-charged spare batteries (P9).  
The camera is in silent mode: Turn silent mode off (P99).  
The flash is not raised: Raise the flash (P39).  
The desired flash mode is not available in the current shooting mode: Choose a different shooting mode  
(P22).  
The camera is in silent mode: Turn silent mode off (P99).  
Some flash modes are  
not available.  
The subject is not in range of the flash: Position the subject in range of the flash (P122).  
The flash window is obstructed: Hold the camera correctly (P18).  
Fast shutter speed selected: Choose a slower shutter speed (P33, 34).  
The flash does not fully  
light the subject.  
The lens is dirty: Clean the lens (P109).  
The lens is blocked: Keep objects away from the lens (P18).  
sis displayed during shooting and the focus frame is displayed in red: Check focus before shooting  
(P116).  
Pictures are blurred.  
kis displayed during shooting: Use the flash or a tripod (P40).  
112  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and Solutions  
Problem  
Solluution  
A slow shutter speed is selected at high temperatures: This is normal and does not indicated a mal-  
function.  
The camera has been used continuously at high temperatures or a temperature warning is displayed: Turn  
the camera off and wait for it to cool down.  
Pictures are mottled.  
Sounds made by the  
camera are recorded with Intelligent Face Detection is on: Turn Intelligent Face Detection off (P54).  
movies.  
Power was interrupted during shooting: Turn the camera off before connecting the AC power adapter/  
Pictures are not recorded. DC coupler. Leaving the camera on can result in corrupted files or damage to the memory card or  
internal memory.  
Playback  
Problem  
Solluution  
Pictures are grainy.  
The pictures were taken with a different make or model of camera.  
Playback zoom unavail-  
able.  
The picture has been saved at a, or is from another make or model of camera (P59).  
The camera is in silent mode: Turn silent mode off (P99).  
No sound in voice memo Playback volume is too low: Adjust playback volume (P102).  
and movie playback.  
The microphone was obstructed: Hold the camera correctly during recording (P2).  
The speaker is obstructed: Hold the camera correctly during playback (P2).  
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the device  
deleted. with which it was originally applied (P94).  
File numbering is unex- The battery-chamber cover was opened while the camera was on. Turn the camera off before  
pectedly reset.  
opening the battery-chamber cover (P15).  
113  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and Solutions  
Connections/Miscellaneous  
Problem  
Solluution  
The camera is not properly connected: Connect the camera properly (P70).  
An A/V cable was connected during movie playback: Connect the camera once movie playback has  
ended.  
No picture or sound.  
Input on the television is set to “TV”: Set input to “VIDEO”.  
The camera is not set to the correct video standard: Match the camera QVIDEO SYSTEM setting to  
the TV (P105).  
The volume on the TV is too low: Adjust the volume.  
No color  
Match the camera QVIDEO SYSTEM setting to the TV (P105).  
The computer does not  
recognize the camera.  
Be sure the camera and computer are correctly connected (P82).  
Pictures can not be  
printed.  
The camera is not properly connected: Connect the camera correctly (P72).  
The printer is off: Turn the printer on.  
Only one copy is printed/  
the date is not printed.  
The printer is not PictBridge compatible.  
Temporary camera malfunction: Remove and reinsert the batteries or disconnect and reconnect the  
AC power adapter/DC coupler (P9).  
The batteries are exhausted: Insert fresh or fully-charged spare batteries (P9).  
The camera is unrespon-  
sive.  
The camera does not  
function as expected.  
Temporary camera malfunction: Remove and reinsert the batteries or disconnect and reconnect the  
AC power adapter/DC coupler (P9). If the problem persists, contact your FUJIFILM dealer.  
No sound.  
Turn silent mode off (P99).  
114  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Problems and Solutions  
Problem  
Hue or content of display  
changes unexpectedly.  
Solluution  
Choose OFF for TMONITOR SUNLIGHT MODE (P4).  
Time and date stamps are not correct: Set the camera clock (P16).  
Time and date stamps  
Time and date stamps appear on photographs: Time and date stamps can not be deleted. To prevent  
stamps appearing on new photographs, select OFF for UDATE STAMP (P106).  
FinePixViewer can not  
be installed or does not  
start.  
FinePixViewer does not support Mac OS X version 10.7 or later. Use one of the applications supplied  
with Mac OS X or purchase other software.  
I want to use an AC power  
adapter and DC coupler  
overseas.  
Check the label on the AC power adapter: The AC power adapter can be used with voltages of 100240V.  
Consult your travel agent for information on plug adapters.  
115  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning Messages and Displays  
The following warnings are displayed in the LCD monitor:  
Warning  
Description  
B(red)  
A(blinks red)  
k
Batteries are low: Insert fresh or fully-charged spare batteries (P9).  
Batteries are exhausted: Insert fresh or fully-charged spare batteries (P9).  
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.  
The camera can not focus. Try one of the following solutions:  
• Use focus lock to focus on another subject at the same distance, then recompose the picture  
(P36).  
s
(displayed in red with red  
focus frame)  
• Use macro mode to focus when taking close-ups (P38).  
Aperture or shutter  
The subject is too bright or too dark and the picture will be over- or under-exposed. If the subject  
speed displayed in red is dark, use the flash (P39).  
FOCUS ERROR  
TURN OFF THE CAMERA AND Camera malfunction. Turn the camera off and then on again. If the message persists, contact a  
TURN ON AGAIN  
FUJIFILM dealer.  
LENS CONTROL ERROR  
The memory card or internal memory is not formatted or the memory card was formatted in a computer or  
other device: Format the memory card or internal memory using the KFORMAT option in the  
camera setup menu (P100).  
The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message  
is repeated, format the card (P100). If the message persists, replace the card.  
Camera malfunction: Contact a FUJIFILM dealer.  
CARD NOT INITIALIZED  
PROTECTED CARD  
BUSY  
The memory card is locked. Unlock the card (P12).  
The memory card is incorrectly formatted. Use the camera to format the card (P100).  
116  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning Messages and Displays  
Warning  
Description  
Turn the camera off and wait for it to cool. If no action is taken, the camera will turn off automati-  
cally.  
p
The memory card is not formatted for use in the camera. Format the card (P100).  
The memory card contacts require cleaning or the memory card is damaged. Clean the contacts  
with a soft, dry cloth. If the message is repeated, format the card (P100). If the message persists,  
replace the card.  
CARD ERROR  
Incompatible memory card. Use a compatible card (P14).  
Camera malfunction. Contact a FUJIFILM dealer.  
aMEMORY FULL  
bMEMORY FULL  
INTERNAL MEMORY IS FULL  
INSERT A NEW CARD  
The memory card or internal memory is full and pictures can not be recorded or copied. Delete  
pictures or insert a memory card with more free space.  
Memory card error or connection error: Reinsert the card or turn the camera off and then on again.  
If the message persists, contact a FUJIFILM dealer.  
Not enough memory remaining to record additional pictures: Delete pictures or insert a memory card  
with more free space.  
The memory card or internal memory is not formatted: Format the memory card or internal memory  
(P100).  
The file is corrupt or was not created with the camera: The file can not be viewed.  
The memory card contacts require cleaning: Clean the contacts with a soft, dry cloth. If the message  
is repeated, format the card (P100). If the message persists, replace the card.  
Camera malfunction: Contact a FUJIFILM dealer.  
WRITE ERROR  
READ ERROR  
117  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning Messages and Displays  
Warning  
Description  
The camera has run out of frame numbers (current frame number is 999-9999). Format the memo-  
ry card and select RENEW for BFRAME NO. Take a picture to reset frame numbering to 100-0001,  
then select CONTINUOUS for BFRAME NO. (P101).  
FRAME NO. FULL  
PRESS AND HOLD  
THE DISP BUTTON TO  
DEACTIVATE SILENT MODE  
An attempt was made to choose a flash mode or adjust the volume with the camera in silent mode.  
Exit silent mode before choosing a flash mode or adjusting the volume (P20).  
A search has returned more than 30,000 results: Choose a search that returns fewer results.  
More than 999 images are selected for deletion: Choose fewer images.  
An attempt was made to delete, rotate, or add a voice memo to a protected picture. Remove  
TOO MANY FRAMES  
PROTECTED FRAME  
protection and try again (P94).  
aCAN NOT CROP  
CAN NOT CROP  
apictures can not be cropped.  
The picture is damaged or was not created with the camera.  
PCANNOT EXECUTE  
QCANNOT EXECUTE  
aCANNOT EXECUTE  
CAN NOT ROTATE  
FCAN NOT ROTATE  
mCANNOT EXECUTE  
FCANNOT EXECUTE  
An attempt was made to create a resized copy at a size equal to or larger than the original. Choose  
a smaller size.  
An attempt was made to rotate a picture that can not be rotated.  
Movies can not be rotated.  
Red-eye removal can not be applied to the selected picture.  
Red-eye removal can not be applied to movies.  
118  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Warning Messages and Displays  
Warning  
NO CARD  
Description  
No memory card inserted when ECOPY is selected. Insert a memory card.  
bNO IMAGE  
aNO IMAGE  
The source selected for ECOPY contains no images. Select a different source.  
The voice memo file is corrupt: The voice memo can not be played back.  
Camera malfunction: Contact a FUJIFILM dealer.  
uERROR  
The DPOF print order on the current memory card contains more than 999 images. Copy the  
pictures to internal memory and create a new print order.  
DPOF FILE ERROR  
CAN NOT SET DPOF  
FCAN NOT SET DPOF  
The picture can not be printed using DPOF.  
Movies can not be printed using DPOF.  
A connection error occurred while pictures were being printed or copied to a computer or other  
device. Confirm that the device is turned on and that the USB cable is connected.  
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). To  
resume printing, turn the printer off and then turn it back on.  
COMMUNICATION ERROR  
PRINTER ERROR  
PRINTER ERROR  
RESUME?  
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If  
printing does not resume automatically, press MENU/OK to resume.  
An attempt was made to print a movie, a picture not created with the camera, or a picture in a  
format not supported by the printer. Movies and some pictures created with other devices can  
not be printed; if the picture is a still picture created with the camera, check the printer manual to  
confirm that the printer supports the JFIF-JPEG or Exif-JPEG format. If it does not, the pictures can  
not be printed.  
CANNOT BE PRINTED  
119  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Internal Memory/Memory Card Capacity  
The following table shows the recording time or number of pictures available at different image sizes.  
All figures are approximate; file size varies with the scene recorded, producing wide variations in the  
number of files that can be stored. The number of exposures or length remaining may not diminish at  
an even rate. A limited number of test pictures can be taken when no memory card is inserted.  
Medium  
Internnall memory  
(approxx. 25 MB)  
4 GB  
8 GB  
O
T
FINE  
3
5
6
8
NORMAL  
FINE  
620  
830  
NORMAL  
990  
1310  
1930  
2530  
3640  
5160  
FINE  
1250  
1670  
1990  
2620  
3880  
7110  
NORMAL  
1990  
2640  
3880  
5080  
7320  
O4:3  
O16:9  
P4:3  
P16:9  
Q4:3  
6
8
12  
15  
23  
33  
990  
1300  
1930  
3540  
12  
22  
Q16:9  
10370  
i19201  
h12801  
f2  
12sec.  
16sec.  
40sec.  
30sec.  
62sec.  
31sec.  
38min.  
49min.  
115min.  
85min.  
172min.  
86min.  
76min.  
98min.  
232min.  
172min.  
345min.  
172min.  
Y640 × 4803  
Y320 × 2403  
Y320 × 1123  
1 Use a Gcard or better. Individual movies can not exceed 29 minutes in length.  
2 Individual movies can not exceed 115 minutes in length.  
3 Use a Gcard or better. Individual movies can not exceed 30 seconds in length.  
Temperature Warning  
The camera will turn off automatically before its temperature or the temperature of the battery rise above safe  
limits. Pictures taken when a temperature warning is displayed may show higher level of noise, or brightness of  
them may be varied (over-exposed images or under-exposed images). Turn the camera off and wait it to cool  
before turning it on again (P113, 117).  
120  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
System  
Model  
Digital Camera FinePix HS25EXR/HS28EXR  
Effective pixels  
Image sensor  
Storage media  
File system  
16 million  
1
/
2 -in., EXR CMOS with primary color filter  
• Internal memory (approx. 25MB)  
Compliant with Design Rule for Camera File System (DCF), Exif 2.3, and Digital Print Order Format  
(DPOF)  
• SD/SDHC/SDXC memory cards  
File format  
Still pictures: Exif 2.3 JPEG (compressed)  
Movies: MOV (H.264)  
O4 : 3: 4,608×3,456  
P4 : 3: 3,264×2,448  
Q4 : 3: 2,304×1,728  
Audio: WAV  
O3 : 2: 4,608×3,072  
P3 : 2: 3,264×2,176  
Q3 : 2: 2,304×1,536  
Image size (pixels)  
O16 : 9: 4,608×2,592  
P16 : 9: 3,264×1,840  
Q16 : 9: 1,920×1,080  
SMOTION PANORAMA 360: 1,624×11,520 (tall)/11,520×1,080 (wide)  
SMOTION PANORAMA 180: 1,624×5,760 (tall)/5,760×1,080 (wide)  
SMOTION PANORAMA 120: 1,624×3,840 (tall)/3,840×1,080 (wide)  
Digital zoom  
Lens  
Focal length  
About 1.4×/2× with intelligent digital zoom (up to 42 ×/60 × when combined with optical zoom)  
Fujinon 30×optical zoom lens, F/2.8 (wide angle)–5.6 (telephoto)  
f=4.2mm–126.0mm (35-mm format equivalent: 24 mm– 720 mm)  
F2.8–F11 (wide angle)/F5.6–F11 (telephoto) in increments of 1 3 EV; can be set manually or automatically  
/
Aperture  
Focus range (distance from • Approx. 45cm (1.4ft.)–infinity (wide angle); 3m (9.8ft.)–infinity (telephoto)  
front of lens)  
Macro: approx. 7cm–3m/0.2ft.–9.8ft. (wide angle); 2m–3.5m/6.6ft.11.4ft. (telephoto)  
Super macro: approx. 1cm–1m/0.4in.–3.3ft.  
Sensitivity  
Standard output sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 3200, 6400 (image size Por Q),  
12800 (image size Q); AUTO, AUTO (400), AUTO (800), AUTO (1600), AUTO (3200)  
121  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
System  
Metering  
256-segment through-the-lens (TTL) metering; MULTI, SPOT, AVERAGE  
Exposure control  
Exposure compensation  
Picture stabilization  
Programmed AE (with program shift), shutter-priority AE, aperture-priority AE, and manual exposure  
2EV+2EV in increments of 1 3 EV (except B, R, M, and U)  
/
Optical stabilization (image-sensor shift)  
1
1
Shutter speed (combined O: 1 4 s– 4,000 s  
H: 4s 1,000 s  
/
1
/
/
/
U: 4s 2 s  
1
1
1
P, S, A: 4s 4,000 s  
M: 30s 4,000 s  
Other modes: 1 4 s– 4,000 s  
mechanical and electronic  
shutter)  
/
/
/
/
Continuous  
I: max. 200 frames; frame rate can be selected from 11, 8, 5, and 3 fps (The frame rate varies depending on  
the shooting conditions or numbers of frames in continuous shooting.)  
P: 16 or 6 frames; frame rate can be selected from 11, 8, 5, and 3 fps  
O: 3 frames (selected exposure, overexposure, underexposure)  
X: 3 frames (PROVIA, Velvia, ASTIA)  
Y: 3 frames (100%, 200%, 400%)  
Focus  
Mode: Single AF, continuous AF, manual focus with one-press AF  
Focus-area selection: Center, multi, area, tracking  
Autofocus system: Contrast-detect TTL AF with AF-assist illuminator  
White balance  
Automatic scene detection; six manual preset modes for direct sunlight, shade, daylight fluorescent,  
warm white fluorescent, cool white fluorescent, and incandescent lighting; custom white balance  
Off, 2sec., 10sec.; auto shutter release (nand o)  
Manual pop-up flash; effective range when sensitivity is set to AUTO (800) is approx. 30cm–7.1m/1ft.–  
23.3ft. (wide angle), 2.0m–3.8m/6.6ft.12.5ft. (telephoto)  
Self-timer  
Flash  
Flash modes  
Auto, forced flash, off, slow synchro (red-eye removal off); auto with red-eye removal, forced flash  
with red-eye removal, off, slow sync with red-eye removal (red-eye removal on)  
122  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
System  
Electronic viewfinder (EVF) 0.2-in./0.5cm, 200k-dot color LCD viewfinder; frame coverage approx. 97%  
Monitor  
Movies  
3.0-in./7.6cm, 460k-dot color LCD monitor; frame coverage approx. 100%  
i1920: 1,920×1,080, 30fps  
f: 640×480 (VGA), 30 fps  
Y320 × 240: 320×240, 160 fps  
h1280: 1,280×720, 30 fps  
Y640 × 480: 640×480, 80 fps  
Y320 × 112: 320×112, 320 fps  
Note: i, h, and fmovies are recorded with stereo sound.  
Input/output terminals  
A/V OUT (audio/video output) NTSC or PAL output with monaural sound  
HDMI output  
HDMI Mini Connector  
Digital input/output  
USB 2.0 High-Speed; MTP/PTP  
123  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power supply/other  
Power sources  
• AA alkaline batteries (×4)  
• AA lithium batteries (×4; available from third-party suppliers)  
• AA rechargeable nickel-metal hydride (Ni-MH) batteries (×4; available from third-party suppliers)  
• AC-5VX AC power adapter and CP-04 DC coupler (sold separately)  
Battery life (approximate  
number of frames that can be  
taken with fresh or fully charged  
batteries)  
Battery type  
Alkaline (type supplied with camera)  
Appproxximaate number of fframes  
350  
700  
400  
Lithium  
Ni-MH  
CIPA standard, measured in B(auto) mode using batteries supplied with camera (alkaline batteries  
only) and SD memory card.  
Note: Number of shots that can be taken with battery varies with battery charge level and will decline  
at low temperatures.  
Camera dimensions  
Shooting weight  
Camera weight  
130.6mm×90.7mm×126.0mm/5.1in. ×3.5in. ×4.9in. (W × H × D), excluding projections  
Approx. 730g/25.7oz., including batteries and memory card  
Approx. 637g/22.4oz., excluding batteries, accessories, and memory cards  
Operating conditions  
Temperature: 0°C+40°C/+32°F+104°F  
Humidity: 10%80% (no condensation)  
Weight and dimensions vary with the country or region of sale.  
124  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Color Television Systems  
NTSC (National Television System Committee) is a color television telecasting specification adopted mainly in the  
U.S.A., Canada, and Japan. PAL (Phase Alternation by Line) is a color television system adopted mainly in European  
countries and China.  
Notices  
• Specifications subject to change without notice; for the latest information, visit http://www.fujifilm.com/products/  
digital_cameras/index.html. FUJIFILM shall not be held liable for damages resulting from errors in this manual.  
• Although the monitor is manufactured using advanced high-precision technology, small bright points and  
anomalous colors (particularly in the vicinity of text) may appear. This is normal for this type of monitor and  
does not indicate a malfunction; images recorded with the camera are unaffected.  
• Digital cameras may malfunction when exposed to strong radio interference (e.g., electric fields, static electric-  
ity, or line noise).  
• Due to the type of lens used, some distortion may occur at the periphery of images. This is normal.  
125  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
126  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memo  
127  
Download from Www.Somanuals.com. All Manuals Search And Download.  
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN  
http://www.fujifilm.com/products/digital_cameras/index.html  
Please contact your local distributor for repairs and technical support. (see Worldwide  
Network list)  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restrictions on Camera Settings  
Shooting Mode and Camera Settings  
The options available in each shooting mode are listed below.  
O
Adv.  
i j  
SP1/SP2  
R
S
T
U
B
n
i
N
P
S
A
M
C
D
L
Z T m  
M
N
O
H U  
Q
R V  
U
V
W
F
1
1
1
1
1
1
1
1
1
✔ ✔1  
✔ ✔1  
OFF  
F
1
1
F
G
✔ ✔1  
AUTO  
N
✔ ✔1  
B
OFF  
O
✔ ✔1  
1
1
1
1
1
P
✔ ✔1 ✔ ✔1  
✔ ✔1  
✔ ✔1  
✔ ✔1  
N4  
K
✔ ✔1  
L
M
B
ON  
✔ ✔1  
✔ ✔1  
1
1
1
1
1
1
P
✔ ✔1 ✔ ✔1  
S/R  
o
n
h
P
J
K
O
I
I
P
O
X
Y
✔ ✔8  
d
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restrictions on Camera Settings  
O
Adv.  
SP1/SP2  
R
S
T
U
B
i j  
n
i
N
P
S
A
M
C
D
L
Z T m  
M
N
O
H U  
Q
R V  
U
V
W
F
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
AUTO  
AUTO (3200)  
AUTO (11600)  
AUTO ((800)  
AUTO ((400)  
12800  
6400  
3200  
1600  
800  
400  
200  
100  
✔ ✔1  
✔ ✔1  
✔ ✔1  
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
o
5
p
q
✔ ✔1  
✔ ✔1  
✔ ✔1  
1
r
s
6
7
t
x
1
✔ ✔1  
✔ ✔8  
✔ ✔8  
✔ ✔8  
J
1
1
1
1
K
j
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restrictions on Camera Settings  
O
Adv.  
i j  
SP1/SP2  
R
S
T
U
B
n
i
N
P
S
A
M
C
D
L
Z T m  
M
N
O
H U  
Q
R V  
U
V
W
F
S
O
P
Q
✔ ✔1  
O
T
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
✔ ✔1  
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔  
AUTO  
A
B
C
D
M
c
1
1
1
U
d
P
e
b
f
d
f
e
q
h
y
R
Z
b
n
2
3
2
2
3
3
3
✔ ✔3  
✔ ✔2  
✔ ✔3  
✔ ✔3  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Restrictions on Camera Settings  
O
Adv.  
i j  
SP1/SP2  
R
S
T
U
B
n
i
N
P
S
A
M
C
D
L
Z T m  
M
N
O
H U  
Q
R V  
U
V
W
F
i1920  
h1280  
f
W
Y640×480  
Y320×240  
Y320×112  
I
g
K
1
L
l
L
M
m
✔ ✔1  
1
OFF  
✔ ✔3  
3
3
3
✔ ✔3  
✔ ✔3  
✔ ✔3  
C
1 Optimized for selected shhootingg mode.  
2 ON selected autoomatically.  
3 OFF seelected automaticaally.  
4 Fllasshh ddiissaabblleedd iinn aallll sshooting modes if lloweerred.  
5 o (MULTI)) selecteed auuttomatticalllyy wwhheenn IInnttelllliiggeenntt FFaaccee DDeetteeccttiioonn iiss oonn..  
6 Camera focuses oon faces when Intellliiggeenntt FFaacce DDeeteectionn is oon..  
7 Intelliiggeenntt FFaacce Detecttion turns off auutommaatiiccaallly in mannual foccus mode.  
8 Fixedd att sseettings befforee rreeccordding a movie.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Electro Voice Portable Speaker Musicaster IA User Manual
Fiesta Gas Grill EZA24025 B309 User Manual
Franklin Industries LLC Ice Maker FIM120 User Manual
Frymaster Fryer BID80 Series User Manual
Fujitsu Switch FS 1004MT User Manual
Fusion Car Speaker MS AB206 User Manual
Garmin All in One Printer 525 User Manual
GE Convection Oven PT920SM User Manual
GE Washer Dryer WSM2420S User Manual
Gianni Industries Door Z 150 User Manual