BL01281-200
EN
Before You Begin
First Steps
DIGITAL CAMERA
FINEPIX JX400 Series
FINEPIX JX300 Series
Basic Photography and Playback
More on Photography
More on Playback
Movies
Owner’s Manual
Thank you for your purchase
of this product. This manual
describes how to use your
FUJIFILM digital camera and
the supplied software. Be sure
that you have read and un-
derstood its contents and the
warnings in “For Your Safety”
(Pii) before using the camera.
Connections
Menus
Technical Notes
For information on related products, visit our website at
http://www.fujifilm.com/products/digital_cameras/index.html
Troubleshooting
Appendix
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
mally follow the operating instructions. Ad-
just only those controls that are covered by
the operating instructions as an improper
adjustment of other controls may result in
damage and will often require extensive work
by a qualified technician to restore the video
product to its normal operation.
Antennas
Use
Outdoor Antenna Grounding: If an outside Cleaning: Unplug this video product from the
antenna or cable system is connected to the wall outlet before cleaning. Do not use liq-
video product, be sure the antenna or cable uid cleaners or aerosol cleaners. Use a damp
system is grounded so as to provide some cloth for cleaning.
protection against voltage surges and built-
Object and Liquid Entry: Never push objects
up static charges. Section 810 of the National
of any kind into this video product through
Electrical Code, ANSI/NFPA No. 70, provides
openings as they may touch dangerous volt-
When the video product exhibits a distinct
information with respect to proper ground-
age points or short out parts that could result
change in performance—this indicates
need for service.
a
ing of the mast and supporting structure,
in a fire or electric shock. Never spill liquid of
grounding of the lead-in wire to an antenna
any kind on the video product.
Replacement Parts: When replacement parts
are required, be sure the service technician
has used replacement parts specified by the
manufacturer or have the same characteris-
tics as the original part. Unauthorized sub-
stitutions may result in fire, electric shock or
other hazards.
discharge unit, size of grounding conductors,
Lightning: For added protection for this video
product receiver during a lightning storm, or
when it is left unattended and unused for
long periods of time, unplug it from the wall
outlet and disconnect the antenna or cable
system. This will prevent damage to the vid-
eo product due to lightning and power-line
surges.
location of antenna discharge unit, connec-
tion to grounding electrodes, and require-
ments for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
Ground Clamp
Antenna Lead
in Wire
Safety Check: Upon completion of any service
or repairs to this video product, ask the ser-
vice technician to perform safety checks to
determine that the video product is in proper
operating condition.
Service
Antenna
Electric Service
Equipment
Servicing: Do not attempt to service this video
product yourself as opening or removing cov-
ers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified
service personnel.
Discharge Unit
(NEC SECTION
810-20)
Ground Clamps
Grounding
Conductors
(NEC SECTION
810-21)
Damage Requiring Service: Unplug this video
product from the wall outlet and refer servic-
ing to qualified service personnel under the
following conditions:
Power Service Grounding
Electrode System (NEC ART
250. PART H)
Power Lines: An outside antenna system • When the power-supply cord or plug is
should not be located in the vicinity of over-
damaged.
head power lines or other electric light or • If liquid has been spilled, or objects have
power circuits, or where it can fall into such
fallen into the video product.
power lines or circuits. When installing an • If the video product has been exposed to
outside antenna system, extreme care should
rain or water.
be taken to keep from touching such power • If the video product has been dropped or
lines or circuits as contact with them might
be fatal.
the cabinet has been damaged.
If the video product does not operate nor-
Download from Www.Somanuals.com. All Manuals Search And Download.
iii
For Your Safety
Be sure to read these notes before use
WARNING
Safety Notes
Do not use the camera in the bathroom or shower. This can cause
a fire or electric shock.
• Make sure that you use your camera correctly. Read these safety
notes and your Owner’s Manual carefully before use.
• After reading these safety notes, store them in a safe place.
Do not use in
the bathroom or
shower
Never attempt to change or take apart the camera (never open
the case). Failure to observe this precaution can cause fire or
electric shock.
About the Icons
The icons shown below are used in this document to indicate the
severity of the injury or damage that can result if the information
indicated by the icon is ignored and the product is used incorrectly
as a result.
Do not
disassemble
Should the case break open as the result of a fall or other accident,
do not touch the exposed parts. Failure to observe this precau-
tion could result in electric shock or in injury from touching the
damaged parts. Remove the battery immediately, taking care
to avoid injury or electric shock, and take the product to the
point of purchase for consultation.
Do not touch
internal parts
This icon indicates that death or serious injury can result if the
information is ignored.
WARNING
Do not change, heat or unduly twist or pull the connection cord and
do not place heavy objects on the connection cord. These actions
could damage the cord and cause a fire or electric shock. If the
cord is damaged, contact your FUJIFILM dealer.
This icon indicates that personal injury or material damage can
result if the information is ignored.
CAUTION
The icons shown below are used to indicate the nature of the instruc-
tions which are to be observed.
Do not place the camera on an unstable surface. This can cause the
camera to fall or tip over and cause injury.
Triangular icons tell you that this information requires atten-
tion (“Important”).
Never attempt to take pictures while in motion. Do not use the
camera while you are walking or driving a vehicle. This can re-
sult in you falling down or being involved in a traffic accident.
Circular icons with a diagonal bar tell you that the action indi-
cated is prohibited (“Prohibited”).
Do not touch any metal parts of the camera during a thunderstorm.
This can cause an electric shock due to induced current from
the lightning discharge.
Filled circles with an exclamation mark indicate an action that
must be performed (“Required”).
Do not use the battery except as specified. Load the battery as
shown by the indicator.
WARNING
Do not heat, change or take apart the battery. Do not drop or subject
the battery to impacts. Do not store the battery with metallic prod-
ucts. Any of these actions can cause the battery to burst or leak
and cause fire or injury as a result.
If a problem arises, turn the camera off, remove the battery, and
disconnect and unplug the AC power adapter. Continued use of
the camera when it is emitting smoke, is emitting any unusual
Unplug from
power socket
odor, or is in any other abnormal state can cause a fire or elec-
tric shock. Contact your FUJIFILM dealer.
Use only the battery or AC power adapters specified for use with this
camera. Do not use voltages other than the power supply voltage
shown. The use of other power sources can cause a fire.
Do not allow water or foreign objects to enter the camera. If water
or foreign objects get inside the camera, turn the camera off,
remove the battery, and disconnect and unplug the AC power
adapter. Continued use of the camera can cause a fire or elec-
tric shock. Contact your FUJIFILM dealer.
If the battery leaks and fluid gets in contact with your eyes, skin or
clothing, flush the affected area with clean water and seek medical
attention or call an emergency number right away.
Avoid exposure
to water
iv
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
WARNING
CAUTION
Do not use the charger to charge batteries other than those speci-
fied here. The supplied battery charger is for use only with the
type of battery supplied with the camera. Using the charger to
charge conventional batteries or other types of rechargeable
batteries can cause the battery to leak fluid, overheat or burst.
Do not use this camera in locations affected by oil fumes, steam, hu-
midity or dust. This can cause a fire or electric shock.
Do not leave this camera in places subject to extremely high temper-
atures. Do not leave the camera in locations such as a sealed
vehicle or in direct sunlight. This can cause a fire.
When carrying the battery, install it in a digital camera or keep it
in the hard case. When storing the battery, keep it in the hard case.
When discarding, cover the battery terminals with insulation tape.
Contact with other metallic objects or batteries could cause
the battery to ignite or burst.
Keep out of the reach of small children. This product could cause
injury in the hands of a child.
Do not place heavy objects on the camera. This can cause the
heavy object to tip over or fall and cause injury.
Keep memory cards out of the reach of small children. Because
memory cards are small, they can be swallowed by children.
Be sure to store memory cards out of the reach of small chil-
dren. If a child swallows a memory card, seek medical atten-
tion or call an emergency number.
Do not move the camera while the AC power adapter is still connect-
ed. Do not pull on the connection cord to disconnect the AC power
adapter. This can damage the power cord or cables and cause
a fire or electric shock.
Do not use the AC power adapter when the plug is damaged or the
plug socket connection is loose. This could cause a fire or electric
shock.
Do not cover or wrap the camera or the AC power adapter in a cloth
or blanket. This can cause heat to build up and distort the cas-
ing or cause a fire.
When you are cleaning the camera or you do not plan to use the
camera for an extended period, remove the battery and disconnect
and unplug the AC power adapter. Failure to do so can cause a
fire or electric shock.
When charging ends, unplug the charger from the power socket.
Leaving the charger plugged into the power socket can cause
a fire.
Unplug from
power socket
Using a flash too close to a person’s eyes may temporarily affect the
eyesight. Take particular care when photographing infants and
young children.
When a memory card is removed, the card could come out of the slot
too quickly. Use your finger to hold it and gently release the card.
Injury could result to those struck by the ejected card.
Request regular internal testing and cleaning for your camera.
Build-up of dust in your camera can cause a fire or electric
shock. Contact your FUJIFILM dealer to request internal clean-
ing every two years. Please note that this service is not free
of charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
v
For Your Safety
■ Charging the Battery
■ Cautions: Handling the Battery
The Battery and Power Supply
Charge the battery in the supplied battery • Do not transport or store with metal objects
Note: Check the type of battery used in
your camera and read the appropriate
sections.
charger. Charging times will increase at am-
such as necklaces or hairpins.
bient temperatures below +10 °C (+50 °F) or • Do not expose to flame or heat.
above +35 °C (+95 °F). Do not attempt to • Do not disassemble or modify.
charge the battery at temperatures above • Use with designated chargers only.
40 °C (+104 °F); at temperatures below 0 °C • Do not drop or subject to strong physical
The following describes the proper use of
batteries and how to prolong their life. Incor-
rect use can shorten battery life or cause leak-
age, overheating, fire, or explosion.
(+32 °F), the battery will not charge.
shocks.
• Do not expose to water.
• Keep the terminals clean.
• The battery and camera body may become
warm to the touch after extended use. This
is normal.
Do not attempt to recharge a fully charged
battery. The battery does not however need
to be fully discharged before charging.
Li-ion Batteries
Read this section if your camera uses a
rechargeable Li-ion battery.
The battery may be warm to the touch imme-
diately after charging or use. This is normal.
The battery is not charged at shipment.
Charge the battery before use. Keep the bat-
tery in its case when not in use.
AA Alkalline/Rechargeable Ni-MH Batteries
Read this section if your camera uses AA
alkaline or rechargeable AA Ni-MH bat-
teries. Information on compatible battery
types may be found elsewhere in the camera
manual.
■ Battery Life
At normal temperatures, the battery can be
recharged about 300 times. A noticeable de-
crease in the length of time the battery will
hold a charge indicates that it has reached
the end of its service life and should be re-
placed.
■ Notes on the Battery
The battery gradually loses its charge when
not in use. Charge the battery one or two
days before use.
■ Cautions: Handling the Batteries
• Do not expose to water, flame, or heat, or
store in warm or humid conditions.
• Do not transport or store with metal objects
such as necklaces or hairpins.
• Do not disassemble or modify the batteries
or battery casing.
• Do not subject to strong physical shocks.
• Do not use batteries that are leaking, de-
formed, or discolored.
Battery life can be extended by turning the
camera off when not in use.
■ Storage
Performance may be impaired if the battery is
left unused for extended periods when fully
charged. Run the battery flat before storing it.
Battery capacity decreases at low tempera-
tures; a depleted battery may not function at
when cold. Keep a fully charged spare battery
in a warm place and exchange as necessary,
or keep the battery in your pocket or other
warm place and insert it in the camera only
when shooting. Do not place the battery in
direct contact with hand warmers or other
heating devices.
If the camera will not be used for an extended
period, remove the battery and store it in a
dry place with an ambient temperature of
from +15 °C to +25 °C (+59 °F to +77 °F). Do
not store in locations exposed to extremes of
temperature.
• Keep out of reach of infants and small chil-
dren.
• Insert in the correct orientation.
vi
Download from Www.Somanuals.com. All Manuals Search And Download.
For Your Safety
• Do not mix old and new batteries, batteries ■ Ni-MH Batteries
AC Power Addaapptteerrss ((AAvvaaiillaabbllee SSeparately)
with different charge levels, or batteries of The capacity of Ni-MH batteries may be
This section applies to all camera models.
Use only FUJIFILM AC power adapters desig-
nated for use with this camera. Other adapt-
ers could damage the camera.
different types.
temporarily reduced when new, after long
• If the camera will not be used for an ex- periods of disuse, or if they are repeatedly
tended period, remove the batteries. Note recharged before being fully discharged. This
that the camera clock will be reset.
is normal and does not indicate a malfunc-
• The AC power adapter is for indoor use only.
• Be sure the DC plug is securely connected
to the camera.
• Turn the camera off before disconnecting
the adapter. Disconnect the adapter by the
plug, not the cable.
• The batteries may be warm to the touch im- tion. Capacity can be increased by repeatedly
mediately after use. Turn the camera off and discharging the batteries using the discharge
allow the batteries to cool before handling. option in the camera setup menu and re-
• Battery capacity tends to decrease at low charging them using a battery charger (sold
temperatures. Keep spare batteries in
a
separately).
pocket or other warm place and exchange
as necessary. Cold batteries may recover
some of their charge when warmed.
• Fingerprints and other stains on the battery
terminals can impair battery performance.
• Do not use with other devices.
CAUTION: Do not use the discharge option
Q
• Do not disassemble.
with alkaline batteries.
• Do not expose to high heat and humidity.
• Do not subject to strong physical shocks.
• The adapter may hum or become hot to the
touch during use. This is normal.
• If the adapter causes radio interference,
reorient or relocate the receiving antenna.
The camera draws a small amount of current
even when off. Ni-MH batteries that have
been left in the camera for an extended pe-
riod may be drawn down to the point that
they no longer hold a charge. Battery perfor-
mance may also drop if the batteries are run
down in a device such as a flashlight. Use the
discharge option in the camera setup menu
to discharge Ni-MH batteries. Batteries that
no longer hold a charge even after repeat-
edly being discharged and recharged have
reached the end of their service life and must
be replaced.
Thoroughly clean the terminals with
a
soft, dry cloth before inserting them in the
camera.
If the batteries leak, clean the battery
compartment thoroughly before in-
serting new batteries.
If fluid from the battery comes into
contact with skin or clothing, flush
the affected area with water. If fluid
enters your eyes, immediately flush the
affected area with water and seek
medical attention. Do not rub your eyes.
Failure to observe this precaution could
result in permanent visual impairment.
Ni-MH batteries can be recharged in a battery
charger (sold separately). Batteries may be-
come warm to the touch after charging. Refer
to the instructions provided with the charger
for more information. Use the charger with
compatible batteries only.
Ni-MH batteries gradually lose their charge
when not in use.
■ Disposal
Dispose of used batteries in accord with local
regulations.
Download from Www.Somanuals.com. All Manuals Search And Download.
vii
For Your Safety
Liquid CCrystal
Electtricall Inteerrference
Using the Camera
In the event that the LCD monitor is damaged, This camera may interfere with hospital or
care should be taken to avoid contact with liq- aviation equipment. Consult with hospital
uid crystal. Take the urgent action indicated or airline staff before using the camera in a
Do not aim the camera at extremely bright
light sources, such as the sun in a cloudless
sky. Failure to observe this precaution could
damage the camera image sensor.
should any of the following situations arise:
hospital or on an aircraft.
•
If liquid crystal comes in contact with your
skin, clean the area with a cloth and then
wash thoroughly with soap and running
water.
If liquid crystal enters your eyes, flush the af-
fected eye with clean water for at least 15
minutes and then seek medical assistance.
If liquid crystal is swallowed, rinse your
mouth thoroughly with water. Drink large
quantities of water and induce vomiting,
then seek medical assistance.
Color Television Systems
Take Test Shots
NTSC (National Television System Committee)
is a color television telecasting specification
adopted mainly in the U.S.A., Canada, and
Japan. PAL (Phases Alternation by Line) is
a color television system adopted mainly in
European countries and China.
Before taking photographs on important
occasions (such as at weddings or before
taking the camera on a trip), take a test shot
and view the result in the LCD monitor to en-
sure that the camera is functioning normally.
FUJIFILM Corporation can not accept liability
for damages or lost profits incurred as a result
of product malfunction.
•
•
Exif Print (Exif Version 2.3)
Exif Print is a newly revised digital camera file
format in which information stored with pho-
tographs is used for optimal color reproduc-
tion during printing.
Notes on Copyright
Unless intended solely for personal use, imag-
es recorded using your digital camera system
cannot be used in ways that infringe copy-
right laws without the consent of the owner.
Note that some restrictions apply to the
photographing of stage performances, enter-
tainments, and exhibits, even when intended
purely for personal use. Users are also asked
to note that the transfer of memory cards
containing images or data protected under
copyright laws is only permissible within the
restrictions imposed by those copyright laws.
Although the display is manufactured using
extremely high-precision technology, it may
contain pixels that are always lit or that do not
light. This is not a malfunction, and images re-
corded with the product are unaffected.
IMPORTANT NOTICE:
Read Before Using the Software
Direct or indirect export, in whole or in part,
of licensed software without the permission
of the applicable governing bodies is pro-
hibited.
Trademarkk Information
xD-Picture Card and E are trademarks of
FUJIFILM Corporation. The typefaces included
herein are solely developed by DynaComware
Taiwan Inc. Macintosh, QuickTime, and Mac
OS are trademarks of Apple Inc. in the U.S.A.
and other countries. Windows 7, Windows
Vista, and the Windows logo are trademarks
of the Microsoft group of companies. Adobe
and Adobe Reader are either trademarks
or registered trademarks of Adobe Systems
Incorporated in the U.S.A. and/or other
countries. The SDHC and SDXC logos are
trademarks of SD-3C, LLC. The HDMI logo is a
trademark. YouTube is a trademark of Google
Inc. All other trade names mentioned in this
manual are the trademarks or registered
trademarks of their respective owners.
Haandling
To ensure that images are recorded correctly,
do not subject the camera to impact or physi-
cal shocks while images are being recorded.
viii
Download from Www.Somanuals.com. All Manuals Search And Download.
About This Manual
Before using the camera, read this manual and the warnings in“For Your Safe-
ty”(Pii). For information on specific topics, consult the sources below.
Table of Contents .............................Pxi Troubleshooting ............................ P83
The “Table of Contents” gives an Having a specific problem with the
overview of the entire manual. The camera? Find the answer here.
principal camera operations are
listed here.
Warning Messages and Displays ...... P88
Find out what’s behind that flashing
icon or error message in the display.
Memoryy Caarrds
Pictures can be stored on optional SD and SDHC memory cards (P10). In this manu-
al, SD/SDHC memory cards are referred to as“memory cards.”
Download from Www.Somanuals.com. All Manuals Search And Download.
ix
Frequeently--Usseedd BBuuttttons
■ Turning the Caamera onn iin Playbaack Mode
y When the camera is
off, playback can be
■ Takiinngg PPictureess DDuurriinngg Playback
y To return instantly to shooting mode,
press the shutter button halfway.
started by pressing the
abutton for about a
second.
Shoot
View
ꢀꢀ
■ Silent Mode
■ Deletingg Pictures
y Press the selector up (b)
to display deletion op-
tions.
y Press and hold the DISP/
BACK button to disable
camera lights and
sounds.
x
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
For Your Safety ..................................................................ii
IMPORTANT SAFETY INSTRUCTIONS ..................................ii
Safety Notes ..................................................................iv
About This Manual ...........................................................ix
Frequently-Used Buttons .................................................x
Moree oonn PPhotography
Shooting Mode................................................................20
SP SCENE POSITION.......................................................21
rPANORAMA...........................................................22
Focus Lock........................................................................25
dExposure Compensation ..........................................27
FMacro Mode (Close-ups)............................................28
NUsing the Flash (Intelligent Flash).............................29
hUsing the Self-Timer..................................................31
bIntelligent Face Detection .......................................32
nFace Recognition (JX400 Series Only) .....................33
Adding New Faces..........................................................33
Viewing, Editing, and Deleting Existing Data .................35
Adding Faces Automatically ...........................................35
Beforre You Begin
Symbols and Conventions.................................................1
Supplied Accessories.........................................................1
Parts of the Camera ..........................................................2
Camera Displays...............................................................4
Shooting ........................................................................4
Playback.........................................................................5
First Steps
Charging the Battery ........................................................6
Inserting the Battery and a Memory Card.......................8
Compatible Memory Cards .............................................10
Turning the Camera on and Off ......................................13
Shooting Mode ..............................................................13
Playback Mode...............................................................13
Basic Setup ......................................................................15
Moree oon Playback
Playback Options.............................................................37
IFavorites: Rating Pictures..........................................37
Playback Zoom...............................................................38
Multi-Frame Playback....................................................39
A
Deleting Pictures......................................................40
Image Search............................................................41
PhotoBook Assist......................................................42
b
k
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode......16
Viewing Pictures .............................................................19
Creating a PhotoBook.....................................................42
Viewing Photobooks ......................................................43
Editing and Deleting Photobooks...................................43
Viewing Panoramas ........................................................44
Download from Www.Somanuals.com. All Manuals Search And Download.
xi
Table of Contents
Movies
Menus
Recording Movies............................................................45
Viewing Movies ...............................................................47
Using the Menus: Shooting Mode..................................60
Using the Shooting Menu...............................................60
Shooting Menu Options .................................................60
ASCENE POSITION .....................................................60
NISO........................................................................60
OIMAGE SIZE............................................................61
TIMAGE QUALITY .....................................................62
PFINEPIX COLOR .......................................................62
DWHITE BALANCE ....................................................63
RCONTINUOUS .........................................................63
bFACE DETECTION.....................................................64
FAF MODE...............................................................64
nFACE RECOGNITION (JX400 Series Only) ....................64
PMODE....................................................................64
OQUALITY................................................................64
Coonnnneections
Viewing Pictures on TV ...................................................48
Printing Pictures via USB................................................49
Printing the DPOF Print Order.........................................51
Viewing Pictures on a Computer....................................53
Windows: Installing MyFinePix Studio ...........................53
Macintosh: Installing FinePixViewer...............................55
Connecting the Camera..................................................57
xii
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Using the Menus: Playback Mode ..................................65
Using the Playback Menu...............................................65
Playback Menu Options..................................................65
kPHOTOBOOK ASSIST................................................65
bIMAGE SEARCH ......................................................65
AERASE ...................................................................65
jMARK FOR UPLOAD TO ............................................66
ISLIDE SHOW ..........................................................67
BRED EYE REMOVAL .................................................67
DPROTECT................................................................68
GCROP.....................................................................68
ORESIZE...................................................................69
CIMAGE ROTATE .......................................................69
iERASE FACE RECOG. (JX400 Series Only)....................70
KPRINT ORDER (DPOF) ..............................................70
The Setup Menu ..............................................................71
Using the Setup Menu....................................................71
Setup Menu Options ......................................................72
FDATE/TIME.............................................................72
NTIME DIFFERENCE ...................................................72
La ......................................................72
oSILENT MODE.........................................................72
RRESET....................................................................73
KFORMAT ................................................................73
AIMAGE DISP. ...........................................................73
BFRAME NO. ............................................................74
GOPERATION VOL......................................................74
HSHUTTER VOLUME ..................................................74
eSHUTTER SOUND....................................................75
IPLAYBACK VOLUME ................................................75
JLCD BRIGHTNESS ....................................................75
ELCD MODE .............................................................75
MAUTO POWER OFF...................................................75
LDIGITAL IS..............................................................75
BRED EYE REMOVAL .................................................76
mBLINK DETECTION...................................................76
DDIGITAL ZOOM .......................................................77
pMOVIE ZOOM TYPE .................................................77
nSAVE ORG IMAGE....................................................78
OBACKGROUND COLOR..............................................78
cGUIDANCE DISPLAY ................................................78
QVIDEO SYSTEM .......................................................78
Download from Www.Somanuals.com. All Manuals Search And Download.
xiii
Table of Contents
Techniccaall NNotes
Troubleshooting
Optional Accessories .......................................................79
Printing........................................................................79
Computer Related..........................................................79
Audio/Visual.................................................................79
Accessories from FUJIFILM..............................................80
Caring for the Camera.....................................................81
Storage and Use .............................................................81
Water and Sand.............................................................81
Condensation................................................................81
Cleaning.........................................................................82
Traveling ........................................................................82
Problems and Solutions..................................................83
Warning Messages and Displays ....................................88
Appendix
Tips and Tricks..................................................................92
Memory Card Capacity....................................................95
FinePix JX400 Series, JX350 to JX395...............................95
FinePix JX300 to JX345 ..................................................96
Specifications ..................................................................97
xiv
Download from Www.Somanuals.com. All Manuals Search And Download.
Before You Begin
Symbols and Conventions
The following symbols are used in this manual:
Q : This information should be read before use to ensure correct operation.
R : Additional information that may be helpful when using the camera.
P: Other pages in this manual on which related information may be found.
Menus and other text in the LCD monitor are shown in bold. In the illustra-
tions in this manual, displays may be simplified for explanatory purposes.
Supplied Accessories
The following items are included with the camera:
Plug adapter*
USB cable
CD-ROM
(contains this
manual)
NP-45A recharge-
able battery
BC-45C battery
charger
• Strap
• User Guide
Attttaacchhiing the Strap
Attach the strap as
shown.
* Shape of adapter varies with region of sale.
Download from Www.Somanuals.com. All Manuals Search And Download.
1
Parts of the Camera
For more information, refer to the page listed to the right of each item.
1
8
2
9
3
10
11
7
4
12
13
17
16
5
15
14
18
19
6
20
Selector button
Move cursor up
d(exposure compensation) button (P27)
b(delete) button (Px)
MENU/OK button
Move cursor left
F(macro) button (P28)
Move cursor right
N(flash) button (P29)
Move cursor down
h(self-timer) button (P31)
2
Download from Www.Somanuals.com. All Manuals Search And DoBwefnolroeaYdo.u Begin
Parts of the Camera
1 Shutter button.............................................................. 18 11 Mode dial...................................................................... 20
2 ON/OFF button ............................................................. 13 12 a(playback) button .................................................. 19
3 Self-timer lamp ............................................................ 31 13 Strap eyelet .................................................................... 1
4 Flash............................................................................. 29 14 Battery-chamber cover................................................... 8
5 Microphone .................................................................. 45 15 USB multi-connector .........................................48, 49, 57
6 Lens and lens cover
16 Tripod mount
7 Zoom control ...........................................................17, 38 17 Speaker......................................................................... 47
8 LCD monitor.................................................................... 4 18 Memory card slot............................................................ 9
9 DISP (display)/BACK button .....................................5, 15 19 Battery chamber............................................................. 8
o(silent mode) button* ................................................x 20 Battery latch..............................................................8, 10
10 Indicator lamp (see below)
*Press and hold the DISP/BACK button until ois displayed.
Thhee IInndicator Lamp
The indicator lamp shows camera status as follows:
Indicator lamp
Glowwss ggrreen
Blinks green
Caammera sstatus
Focus locked.
Blur, focus, or exposure warning. Picture can be taken.
Blinks green and orange Recording pictures. Additional pictures can be taken.
Glowwss oorraannggee
Blinks orange
Blinks red
Recording pictures. No additional pictures can be taken at this time.
Flash charging; flash will not fire when picture is taken.
Lens or memory error.
Before YDouowBnelgoiand from Www.Somanuals.com. All Manuals Search And Download.
3
Parts of the Camera
Camera Displays
The following types of indicator may be displayed during shooting and play-
back. Indicators vary with camera settings.
■ Shooting
6 Focus warning .........................................................18, 88
7 Number of available frames.......................................... 95
8 Sensitivity..................................................................... 60
9 Image size/Image quality ........................................61, 62
10 FINEPIX color ................................................................ 62
11 White balance............................................................... 63
12 Battery level ................................................................... 5
13 Blur warning............................................................30, 88
14 Exposure compensation................................................ 27
15 Shutter speed /Aperture
1 Shooting mode............................................................. 20 16 Date and time............................................................... 15
2 Intelligent Face Detection indicator .............................. 32 17 Self-timer indicator ...................................................... 31
3 Continuous shooting mode........................................... 63 18 Macro (close-up) mode................................................. 28
4 Silent mode indicator ................................................3, 72 19 Flash mode ................................................................... 29
5 Focus frame .................................................................. 25
4
Download from Www.Somanuals.com. All Manuals Search And DoBwefnolroeaYdo.u Begin
Parts of the Camera
■ Playback
1 Playback mode indicator..........................................19, 37
2 Intelligent Face Detection indicator .........................32, 64
3 Red-eye removal indicator............................................ 67
4 Silent mode indicator ................................................3, 72
5 Gift image..................................................................... 37
6 Frame number.............................................................. 74
7 Mark for upload to........................................................ 66
8 Photobook assist........................................................... 42
9 Favorites ....................................................................... 37
10 DPOF print indicator...................................................... 51
11 Protected image ........................................................... 68
Batterryy LLevel
Battery level is shown as follows:
Indicator
Description
D(white)
C(white)
B(red)
Battery partially discharged.
Battery more than half discharged.
Low battery. Charge as soon as possible.
A(blinks red) Battery exhausted. Turn camera off and charge battery.
Hiding and Viewing Indicators
Press DISP/BACK to cycle through shooting and playback indicators as follows:
• Shooting: Indicators displayed/indicators hidden/best framing
• Playback: Indicators displayed/indicators hidden/Ifavorites
Before YDouowBnelgoiand from Www.Somanuals.com. All Manuals Search And Download.
5
First Steps
Charging tthhee BBaattttery
The battery is not charged at shipment. Charge the battery before use.
Attach the plug adapter.
1
Attach the plug adapter as shown at right,
making sure that it is fully inserted and clicks
into place on the charger terminals.
Q The plug adapter is exclusively for use with the
supplied battery charger. Do not use it with
other devices.
Battery charger
Plug adapter
Place the battery in the supplied battery charger.
2
Battery
Insert the battery in the orien-
Arrow
tation indicated by the CFD
Charge lamp
labels.
The camera uses an NP-45A re-
chargeable battery.
CFD label
CFD label
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging the Battery
Plug the charger in.
3
Plug the charger into an indoor power outlet. The charging indicator will
light.
Thhee CCharggiinngg IInnddicator
The charging indicator shows battery charge status as follows:
Charging indicator
Off
On (green)
On (orange)
Blinkss (orange)
Battery status
Battery not inserted.
Battery fully charged.
Battery charging.
Battery fault.
Action
Insert the battery.
Reemmoove the battery.
—
Unplug thhe chargeer and remmove the battery.
Charge the battery.
Remove the battery when charging is complete.
4
Q Unplug the charger when it is not in use.
First SteDpsownload from Www.Somanuals.com. All Manuals Search And Download.
7
Insertinng the Batttteerryy aanndd aa MMeemmoorry Card
After charging the battery, insert the battery and memory card as described
below.
Open the battery-chamber cover.
R Be sure the camera is off before opening the
battery-chamber cover.
1
Q Do not open the battery-chamber cover when
the camera is on. Failure to observe this pre-
caution could result in damage to image files or
memory cards.
Q Do not use excessive force when handling the battery-chamber cover.
Insert the battery.
Align the orange stripe on the battery with
2
Orange stripe
the orange battery latch and slide the bat-
tery into the camera, keeping the battery
latch pressed to one side. Confirm that the
battery is securely latched.
Battery latch
Q Insert the battery in the correct orientation. Do NOT use force or attempt to insert
the battery upside down or backwards. The battery will slide in easily in the cor-
rect orientation.
8
Download from Www.Somanuals.com. All Manuals Search And DownloaFdir.st Steps
Inserting the Battery and a Memory Card
Insert the memory card.
3
Holding the memory card in the
orientation shown at right, slide it in
until it clicks into place at the back
of the slot.
Q Be sure card is in the correct orienta-
tion; do not insert at an angle or use
force.
Battery
Click
Q SD/SDHC memory cards can be locked, making it im-
possible to format the card or to record or delete im-
ages. Before inserting an SD/SDHC memory card, slide
the write-protect switch to the unlocked position.
Write-protect switch
Close the battery-chamber cover.
4
First SteDpsownload from Www.Somanuals.com. All Manuals Search And Download.
9
Inserting the Battery and a Memory Card
Removingg the Batteery and Meemmory Caarrdd
Before removing the battery or memory card, turn the camera off and open the
battery-chamber cover.
Battery latch
To remove the battery, press the battery latch to the side, and
slide the battery out of the camera as shown.
To remove the memory card, press it in and release it slowly.
The card can then be removed by hand. When a memory card
is removed, the card could come out of the slot too quickly. Use
your finger to hold it and gently release the card.
■ Compatible Memory Cards
FUJIFILM and SanDisk SD and SDHC memory cards have been approved for
use in the camera. A complete list of approved memory cards is available at
http://www.fujifilm.com/support/digital_cameras/compatibility/. Operation is
not guaranteed with other cards. The camera can not be used with xD-Picture
Cards or MultiMediaCard (MMC) devices.
10
Download from Www.Somanuals.com. All Manuals Search And DownloaFdir.st Steps
Inserting the Battery and a Memory Card
Q Memory Caarrds
• Do not turn the camera off or remove the memory card while the memory card is
being formatted or data are being recorded to or deleted from the card. Failure to
observe this precaution could damage the card.
• Format SD/SDHC memory cards before first use, and be sure to reformat all memory
cards after using them in a computer or other device. For more information on for-
matting memory cards, see“KFORMAT” (P73).
• Memory cards are small and can be swallowed; keep out of reach of children. If a
child swallows a memory card, seek medical assistance immediately.
• miniSD or microSD adapters that are larger or smaller than the standard dimensions
of an SD/SDHC memory card may not eject normally; if the card does not eject, take
the camera to an authorized service representative. Do not forcibly remove the card.
• Do not affix labels to memory cards. Peeling labels can cause camera malfunction.
• Movie recording may be interrupted with some types of SD/SDHC memory card. Use
a G card or better when shooting HD or high-speed movies.
• Formatting a memory card in the camera creates a folder in which pictures are
stored. Do not rename or delete this folder or use a computer or other device to
edit, delete, or rename image files. Always use the camera to delete pictures; before
editing or renaming files, copy them to a computer and edit or rename the copies,
not the originals.
First SteDpsownload from Www.Somanuals.com. All Manuals Search And Download.
11
Inserting the Battery and a Memory Card
Q Batteries
• Remove dirt from the battery terminals with a clean, dry cloth. Failure to observe this
precaution could prevent the battery from charging.
• Do not affix stickers or other objects to the battery. Failure to observe this precaution
could make it impossible to remove the battery from the camera.
• Do not short the battery terminals. The battery could overheat.
• Read the cautions in“The Battery and Power Supply”(Pvi).
• Use only battery chargers designated for use with the battery. Failure to observe this
precaution could result in product malfunction.
• Do not remove the labels from the battery or attempt to split or peel the outer casing.
• The battery gradually loses its charge when not in use. Charge the battery one or
two days before use.
12
Download from Www.Somanuals.com. All Manuals Search And DownloaFdir.st Steps
Turning the Camera on and Off
Shooting Mode
Playback Mode
Press the ON/OFF button to turn the To turn the camera on and begin
camera on. The lens will extend and playback, press the a button for
the lens cover will open.
about a second.
Press the a button again or press
the ON/OFF button to turn the camera
off.
Press ON/OFF again to turn the camera
off.
R Switching to Playback Mode
R Switching to Shooting Mode
Press the a button to start playback.
Press the shutter button halfway to return
to shooting mode.
To exit to shooting mode, press the shut-
ter button halfway. Press the a button
to return to playback.
First SteDpsownload from Www.Somanuals.com. All Manuals Search And Download.
13
Turning the Camera on and Off
Q Forcibly obstructing the lens could cause damage or product malfunction.
Q Fingerprints and other marks on the lens can affect pictures. Keep the lens clean.
Q The ON/OFF button does not completely end the supply of power to the camera.
R Auto Power Off
The camera will turn off automatically if no operations are performed for the length of
time selected for MAUTO POWER OFF (P75).
14
Download from Www.Somanuals.com. All Manuals Search And DownloaFdir.st Steps
Basic Setup
A language-selection dialog is displayed the first time the camera is turned
on. Set up the camera as described below (you can reset the clock or change
languages at any time using the FDATE/TIME or La options in
the setup menu; for information on displaying the setup menu, see page 71).
Highlight a language and press MENU/OK.
1
R Press DISP/BACK to skip the current step. Any steps you skip
will be displayed the next time the camera is turned on.
The date and time will be displayed. Press the selector
left or right to highlight the year, month, day, hour, or
minute and press up or down to change. To change the
order in which the year, month, and day are displayed,
highlight the date format and press the selector up or
down. Press MENU/OK when settings are complete.
2
R Thhee CCamera Clock
If the battery is removed for an extended period, the camera clock will be reset and the
language-selection dialog will be displayed when the camera is turned on.
First SteDpsownload from Www.Somanuals.com. All Manuals Search And Download.
15
Basic Photography and Playback
Taking Pictures in Q (Scene Recognition) Mode
This section describes how to take pictures in Q (scene recognition) mode.
The camera automatically analyzes the composition and adjusts settings ap-
propriately.
Select Q mode.
1
Turn the camera on and rotate the mode
dial to Q. The Q display will appear in
the LCD monitor.
The gIccoon
This icon indicates that the camera continuously searches for faces to select the
appropriate scene, increasing the drain on the battery.
Thhe Scene Iccoon
The camera selects the scene according to shooting conditions and the type of
subject: bPORTRAIT (portraits), cLANDSCAPE (landscapes), dNIGHT (poorly-lit land-
scapes), eMACRO (close ups), fNIGHT PORTRAIT (poorly-lit portraits), gBACKLIT PORTRAIT
(backlit portraits), aAUTO (all other scenes)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Taking Pictures in Q (Scene Recognition) Mode
Frame the picture.
Use the zoom control to frame the picture in the display.
2
Zoom indicator
Zoom out
Zoom in
Hoollddiinngg tthhee CCamera
Hold the camera steady with both hands and brace your
elbows against your sides. Shaking or unsteady hands can
blur your shots.
To prevent pictures that are out of focus or too dark (under-
exposed), keep your fingers and other objects away from
the lens and flash.
Basic PhDotoowgnrlaopahdyfraonmd PWlawywba.Scokmanuals.com. All Manuals Search And Download.
17
Taking Pictures in Q (Scene Recognition) Mode
Focus.
3
Press the shutter button halfway to focus.
Double
beep
R The lens may make a noise when the camera focuses; this
is normal.
If the camera is able to focus, it will beep twice and the indicator lamp will
glow green.
If the camera is unable to focus, the focus frame will turn red, swill be dis-
played, and the indicator lamp will blink green. Change the composition
or use focus lock (P25).
Shoot.
4
Smoothly press the shutter button the rest of the way
down to take the picture.
Click
R If the subject is poorly lit, the flash may fire when the
picture is taken. For information on using the flash when
lighting is poor, see “NUsing the Flash (Intelligent Flash)”
(P29).
Thhee SShhuuttter Button
The shutter button has two positions. Pressing the shutter button halfway sets
focus and exposure; to shoot, press the shutter button the rest of the way down.
18
Download from Www.Somanuals.com. All ManualsBaSseicarPchhoAtongdraDpohwynalonaddP.layback
Viewing Pictures
Pictures can be viewed in the LCD monitor. When taking important photo-
graphs, take a test shot and check the results.
Press the abutton.
The most recent picture will be displayed.
1
View additional pictures.
2
Press the selector right to view pictures in
the order recorded, left to view pictures in
reverse order.
Press the shutter button to exit to shooting
mode.
Basic PhDotoowgnrlaopahdyfraonmd PWlawywba.Scokmanuals.com. All Manuals Search And Download.
19
More on Photography
Shhoooottiing Mode
Choose a shooting mode according to the scene or type
of subject. To select a shooting mode, align the mode
icon with the mark next to the mode dial.
P (PROGRAM AE): Select for full control over camera settings,
including exposure, white balance, and focus mode.
F (MOVIE): Shoot movies with
sound (P45).
M (SCENE RECOGNITION AUTO):
The camera analyzes the compo-
sition and selects a scene appro-
priate to the subject and shoot-
ing conditions (P16).
SP1/SP2
(SCENE
POSITIONS):
Choose a scene suited to the
subject or shooting conditions
and let the camera do the rest
(P21).
B (AUTO): A simple “point-and-
shoot” mode recommended for
first-time users of digital cameras.
D
(NATURAL LIGHT): Capture
natural lighting under low light
conditions.
C(NATURAL & N): The camera takes two shots: one with-
out the flash and one with.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Shooting Mode
SP SCENE POSITION
The camera offers a choice of “scenes,” each adapted to particular
shooting conditions or a specific type of subject. Use the ASCENE
POSITION option in the shooting menu to choose the scene as-
signed to the SP1 and SP2 positions on the mode dial.
Scene
L PORTRAIT
D BABY MODE
Description
Choose for portraits.
Choose for natural skin tones when taking portraits of infants.
The shutter is released automatically when Intelligent Face Detection
detects a smiling face.
K SMILE&SHOOT
MLANDSCAPE
rPANORAMA
NSPORT
Choose for daylight shots of buildings and landscapes.
Take up to three pictures and join them together to form a panorama.
Choose when photographing moving subjects.
O NIGHT
HNIGHT (TRIPOD)
Choose this mode for poorly lit twilight or night scenes.
Choose this mode for slow shutter speeds when shooting at night.
Slow shutter speeds are used to capture the expanding burst of light
from a firework.
Choose this mode to record the vivid colors in sunrises and sunsets.
Choose for crisp, clear shots that capture the brightness of scenes domi-
nated by shining white snow.
P FIREWORKS
QSUNSET
RSNOW
SBEACH
U PARTY
V FLOWER
WTEXT
Choose for crisp, clear shots that capture the brightness of sunlit beaches.
Capture indoor background lighting under low-light conditions.
Choose for vivid close-ups of flowers.
Take clear pictures of text or drawings in print.
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
21
Shooting Mode
■ rPANORAMA
In this mode, you can take up to three pictures and join them together to form
a panorama. Use of a tripod is recommended to assist in composing overlap-
ping shots. The camera zooms all the way out and zoom remains fixed at the
widest angle until shooting is complete.
Select rPANORAMA for SP1 or SP2 (P21).
1
2
3
Select CAUTO for PMODE in the shooting menu (P60).
Press the selector up to select a frame. Press the selector left or right to
highlight a pan direction and press MENU/OK.
Take a photograph. Exposure and white balance for the panorama are set
with the first shot.
4
5
Frame the next shot to overlap with the previous picture by superimpos-
ing y on + so that they form a solid circle (z). The camera will release the
shutter automatically.
Pan direction
Display after 1st shot
Shutter released
22
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
Shooting Mode
Take the last shot as described in Step 5.
6
7
R To end shooting and create a panorama after the first or second shot, press the
multi selector up after completing Step 4 or Step 5 and proceed to Step 7.
Press MENU/OK to save the picture.
Q Panoramas are created from multiple frames. The camera may in some cases be
unable to stitch the frames together perfectly.
Q The desired results may not be achieved with moving subjects, subjects close to
the camera, unvarying subjects such as the sky or a field of grass, subjects that are
in constant motion, such as waves and waterfalls, or subjects that undergo marked
changes in brightness. Panoramas may be blurred if the subject is poorly lit.
For Best Results
For best results, be careful not to tilt the camera backward or forward or to either
side and try not to move the camera while y and + are aligned to form a solid circle.
Printting PPanoramas
Depending on the page size and the size of the panorama, panoramas may print
with their edges cropped out or with wide margins at the top and bottom or at
both sides.
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
23
Shooting Mode
Framing Panoramaass MManually
Follow the steps below if the desired results are not achieved with CAUTO se-
lected for PMODE:
Select DMANUAL for PMODE in the shooting menu.
1
Select a frame and take the first shot.
2
Press MENU/OK to display a guide showing an edge of the picture you have just taken. Take
the next shot, framing it to overlap with the previous picture.
3
Guide
Display after 1st shot
Frame next shot
Repeat Step 3 to take the third shot and then press MENU/OK to display the completed pan-
orama.
4
5
Press MENU/OK to save the picture.
24
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
Focus Lock
To compose photographs with off-center subjects:
Focus: Position the subject in the focus frame (U)
and press the shutter button halfway to lock focus
and exposure. Focus and exposure will remain locked
while the shutter button is pressed halfway (AF/AE
lock).
1
2
3
Recompose: Keep the button pressed halfway.
Shoot: Press the button all the way down.
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
25
Focus Lock
Autoffocus
Although the camera boasts a high-precision autofocus system, it may be unable to
focus on the subjects listed below. If the camera is unable to focus, focus on another
subject at the same distance and use focus lock to recompose the photograph.
• Very shiny subjects such as mirrors or car bodies.
• Fast-moving subjects.
• Subjects that show little contrast with the background
(for example, subjects in clothing that is the same color
• Subjects photographed through a window or other re- as the background).
flective object.
• Subjects positioned in front of or behind a high-contrast
• Dark subjects and subjects that absorb rather than reflect object that is also in the focus frame (for example, a
light, such as hair or fur.
• Insubstantial subjects, such as smoke or flame.
subject photographed against a backdrop of highly con-
trasting elements).
26
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
dExposure Compensation
To adjust exposure compensation when photo-
graphing very bright, very dark, or high-contrast
subjects, press the selector up (d). Press the selec-
tor up or down to choose an exposure compensa-
tion value and then press MENU/OK.
Choose positive (+) values
to increase exposure
Choose negative (–) values
to reduce exposure
R A dicon and exposure indicator are displayed at settings other than 0. Exposure
compensation is not reset when the camera is turned off; to restore normal expo-
sure control, choose a value of 0.
R Turn the flash off when using exposure compensation.
R Exposure compensation is available only in mode P.
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
27
FMacro Mode (Close-ups)
For close-ups, press the selector left (F) and select
F. When macro mode is in effect, the camera fo-
cuses on subjects near the center of the frame. Use
the zoom buttons to compose pictures (P17).
To exit macro mode, press the selector left (F) and select
H.
R Use of a tripod is recommended to prevent blur caused by camera shake.
R The shadow cast by the lens may appear in photographs taken with the flash at
very short ranges. Zoom out or increase the distance to the subject.
28
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
NUsing thhe Flashh ((IInnttelligent Flash)
When the flash is used, the camera’s Intelligent Flash system instantly analyzes
the scene based on such factors as the brightness of the subject, its position
in the frame, and its distance from the camera. Flash output and sensitivity
are adjusted to ensure that the main subject is correctly exposed while pre-
serving the effects of ambient background lighting, even in dimly-lit indoor
scenes. Use the flash when lighting is poor, for example when shooting at
night or indoors under low light.
Press the selector right (N) and choose from the fol-
lowing flash modes:
Option
Description
AUTO/K
(AUTO FLASH)
The flash fires when required. Recommended in most situations.
N/L
The flash fires whenever a picture is taken. Use for backlit subjects or for natural
(FORCED FLASH) coloration when shooting in bright light.
P
The flash does not fire even when the subject is poorly lit. Use of a tripod is
(SUPPRESSED FLASH) recommended.
O/M
Capture both the main subject and the background under low light (note that
(SLOW SYNCHRO) brightly lit scenes may be overexposed).
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
29
NUsing the Flash (Intelligent Flash)
R If the flash will fire, pwill be displayed when the shutter button is pressed halfway.
At slow shutter speeds, kwill appear in the display to warn that pictures may be
blurred; use of a tripod is recommended.
R The flash may fire several times with each shot. Do not move the camera until
shooting is complete.
R The flash may cause vignetting.
Red-Eyee Removal
When Intelligent Face Detection (P32) and red-eye removal (P67) are
on, red-eye removal is available in auto (K; RED EYE REDUCTION), flash
on (L; FORCED FLASH), and slow sync (M; RED EYE & SLOW) modes.
Red-eye removal minimizes “red-eye”caused when light from the flash is
reflected from the subject’s retinas as shown in the illustration at right.
30
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
hUsing the Self-Timer
To use the self-timer, press the selector down (h)
and choose from the following options:
Option
T(OFF)
Description
Self-timer off.
The shutter is released ten seconds after the shutter button is pressed. Use for
self-portraits. The self-timer lamp on the front of the camera blinks while the
timer counts down.
The shutter is released two seconds after the shutter button is pressed. Use to
reduce blur caused by the camera moving when the shutter-release button is
pressed. The self-timer lamp will blink as the timer counts down.
S(10 SEC)
R(2 SEC)
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
31
bInteelllligent Faace DDeettection
Intelligent Face Detection sets focus and exposure for human faces anywhere
in the frame, preventing the camera from focusing on the background in
group portraits. Choose for shots that emphasize portrait subjects.
To use Intelligent Face Detection, press MENU/OK
to display the shooting menu and select ON for
bFACE DETECTION. Faces can be detected with
the camera in vertical or horizontal orientation; if a
face is detected, it will be indicated by a green bor-
der. If there is more than one face in the frame, the
camera will select the face closest to the center;
other faces are indicated by white borders.
Q In some modes, the camera may set exposure for the frame as a whole rather than
the portrait subject.
Q If the subject moves as the shutter button is pressed, their face may not be in the
area indicated by the green border when the picture is taken.
32
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
nFace Recognition (JX400 Serriieess OOnly)
The camera can store information on the face and personal
details (name, relationship, and birth date) of portrait sub-
jects and assign these subjects priority for Intelligent Face
Detection or display their names and other information
during playback.
Happy Birthday!
Adding New Faces
Follow the steps below to add faces to the face recognition database.
Select REGISTER.
Select REGISTER for nFACE RECOGNITION in the shooting menu.
1
R To disable face recognition, select OFF.
Take a photograph.
After checking that the subject is facing the camera,
2
frame the subject using the guides and take the pho-
tograph.
R If an error is displayed, take the photograph again.
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
33
nFace Recognition (JX400 Series Only)
Enter face recognition data
3
Press MENU/OK to display face recognition data and enter the following in-
formation:
• NAME: Enter a name of up to 14 characters and press MENU/OK.
• CATEGORY: Choose the option that describes your relationship to the sub-
ject and press MENU/OK.
• BIRTHDAY: Enter the subject’s date of birth and press MENU/OK.
R If you zoom in on the face of a person in the face recognition database on their
birthday, the camera will display their name and the message“Happy Birthday!”
34
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
nFace Recognition (JX400 Series Only)
Viewing, Editing, and Deleting Existing Data
Follow the steps below to view, edit, or delete face recognition data.
Select VIEW & EDIT for nFACE RECOGNITION.
1
2
3
Select a face.
View or edit face recognition data.
The name, category, or birth date can be edited as described in Step 3 of
“Adding New Faces”(P33). To retake the photo, select REPLACING IMAGE
and shoot a new portrait as described above.
R To delete face recognition data for the selected subject, select ERASE.
Adding Faces Automatically
To automatically add frequently-photographed subjects to the face recogni-
tion database, select ON for AUTO REGISTRATION in the face recognition
menu. If the camera detects a face that has been photographed many times
without being added to the database, it will display a message prompting you
to create a new face recognition entry. Press MENU/OK and enter face recogni-
tion data.
R The camera may sometimes fail to recognize new faces automatically. If necessary,
faces can be added manually using the REGISTER option.
More onDPohwontologardapfrhoym Www.Somanuals.com. All Manuals Search And Download.
35
nFace Recognition (JX400 Series Only)
Face Recoognition
The camera can store up to eight faces. If you attempt to add a ninth face, a confir-
mation dialog will be displayed; use VIEW & EDIT to make room for new faces by
deleting existing data. AUTO REGISTRATION is disabled if there are already data for
eight faces.
WhenIntelligentFaceDetection(P32)isonandtheframecontainsmultiplesubjects
from the face recognition database, the camera displays the name of the subject
that will be used to set focus and exposure (the subject shown by the green frame).
If no name is entered, the camera will show “---”. Subjects identified using face rec-
ognition but not used to set focus and exposure are shown by orange frames, other
subjects by white frames.
Q The camera may fail to identify subjects in the face recognition database if they
are not facing the camera or are only partly in the frame, or if details of the sub-
jects’faces or expressions differ markedly from those in the database.
36
Download from Www.Somanuals.com. All Manuals Search AMndorDeoownnPlohaodt.ography
More on Playback
Playback OOpptions
To view the most recent picture in the LCD monitor, press the abutton.
Press the selector right to view pictures in the order recorded, left to view
pictures in reverse order. Keep the selector pressed to scroll rapidly to the
desired frame.
R Pictures taken using other cameras are indicated by a m(“gift image”) icon during
playback.
IFavorites: Rating Pictures
To rate the picture currently displayed in full-frame playback, press DISP/BACK
and press the selector up and down to select from zero to five stars.
Download from Www.Somanuals.com. All Manuals Search And Download.
37
Playback Options
Playback Zoom
Select i to zoom in on pictures displayed in single-frame playback; select
jto zoom out. When the picture is zoomed in, the selector can be used to
view areas of the image not currently visible in the display.
Zoom indicator
Navigation window shows
portion of image currently
displayed in LCD monitor
Press DISP/BACK to exit zoom.
R The maximum zoom ratio varies with image size. Playback zoom is not available
with cropped or resized copies saved at a size of a or smaller.
38
Download from Www.Somanuals.com. All Manuals Search And DMoowrnelooandP.layback
Playback Options
Multi-Frame Playback
Selecting jwhen a picture is shown full-frame in the LCD monitor displays
the current image with previous and following images in the background.
Select j to increase the number of images displayed to two, nine, or one
hundred, ito view fewer images.
When two or more images are displayed, use the selector to highlight images
and press MENU/OK to view the highlighted image full frame. In the nine- and
hundred-frame displays, use the selector to view more pictures.
More onDPolawynbloaackd from Www.Somanuals.com. All Manuals Search And Download.
39
A
Deleting Piictures
To delete individual pictures, multiple selected
pictures, or all pictures, press MENU/OK, select
AERASE (P65), and choose from the options
below. Note that deleted pictures can not be re-
covered. Copy important pictures to a computer
or other storage device before proceeding.
Option
Description
Press the selector left or right to scroll through pictures and press MENU/OK to delete
the current picture (a confirmation dialog is not displayed).
FRAME
Highlight pictures and press MENU/OK to select or deselect (pictures that are protected
SELECTED or in a print order are shown by S). When the operation is complete, press DISP/BACK
FRAMES to display a confirmation dialog, then highlight OK and press MENU/OK to delete the
selected pictures.
A confirmation dialog will be displayed; highlight OK and press MENU/OK to delete
all unprotected pictures. Pressing DISP/BACK cancels deletion; note that any pictures
deleted before the button was pressed can not be recovered.
ALL
FRAMES
R Protected pictures can not be deleted. Remove protection from any pictures you
wish to delete (P68).
R If a message appears stating that the selected images are part of a DPOF print order,
press MENU/OK to delete the pictures.
40
Download from Www.Somanuals.com. All Manuals Search And DMoowrnelooandP.layback
b
Image Search
Search for pictures.
Select bIMAGE SEARCH in the playback menu (P65), highlight one of
the following search criteria, and press MENU/OK:
• BY DATE: Search by date.
1
• BY FACE: Search for faces from the face recognition database.
• BY IFAVORITES: Search by rating.
• BY SCENE: Search by scene.
• BY TYPE OF DATA: Find all still pictures or all movies.
• BY UPLOAD MARK: Find all pictures selected for upload to a specified desti-
nation.
Select a search condition. Only pictures that match the search condition
will be displayed. To delete or protect selected pictures or to view the
search results in a slide show, press MENU/OK and choose AERASE (P40),
DPROTECT (P68), or ISLIDE SHOW (P67).
2
More onDPolawynbloaackd from Www.Somanuals.com. All Manuals Search And Download.
41
k
PhotooBBooookk AAssist
Create books from your favorite photos.
Creating a PhotoBook
Select NEW BOOK for kPHOTOBOOK ASSIST in the playback menu
(P65) and choose from the following options:
1
• SELECT FROM ALL: Choose from all available pictures.
• SELECT BY IMAGE SEARCH: Choose from pictures matching selected search
conditions (P41).
R Neither photographs a or smaller nor movies can be selected for photobooks.
Scroll through the images and press the selector up to select or deselect.
To display the current image on the cover, press the selector down. Press
MENU/OK to exit when the book is complete.
2
3
R The first picture selected becomes the cover image. Press the selector down to
select a different image for the cover.
Select COMPLETE PHOTOBOOK (to select all photos or all photos match-
ing the specified search conditions for the book, choose SELECT ALL). The
new book will be added to the list in the photobook assist menu.
Q Books can contain up to 300 pictures.
Q Books that contain no photos are automatically deleted.
42
Download from Www.Somanuals.com. All Manuals Search And DMoowrnelooandP.layback
kPhotoBook Assist
Viewing Photobooks
Highlight a book in the photobook assist menu and press MENU/OK to display
the book, then press the selector left or right to scroll through the pictures.
Editing and Deleting Photobooks
Display the photobook and press MENU/OK. The following options will be dis-
played; select the desired option and follow the on-screen instructions.
• EDIT: Edit the book as described in“Creating a PhotoBook”(P42).
• ERASE: Delete the book.
Photoobooks
Photobooks can be copied to a computer using the supplied MyFinePix Studio soft-
ware.
More onDPolawynbloaackd from Www.Somanuals.com. All Manuals Search And Download.
43
Viewing Panoramas
If you press the selector down when a panorama is displayed full frame, the
camera will play back the picture from left to right. To pause playback, press
the selector down; press the selector down again to resume. To delete the
panorama, press the selector up (b) when playback is paused. To exit to full-
frame playback, press the selector up while panorama playback is in progress.
44
Download from Www.Somanuals.com. All Manuals Search And DMoowrnelooandP.layback
Movies
Recording Movies
Shoot short movies with sound. During recording, zREC
and the time remaining will be displayed in the LCD moni-
tor and sound will be recorded via the built-in microphone
(be careful not to cover the microphone during recording).
Rotate the mode dial to FMOVIE.
1
2
3
Press the shutter button all the way down to start recording.
To end recording, press the shutter button again. Recording ends auto-
matically when the movie reaches maximum length or memory is full.
Zoooomm aadjustment
Zoom can be adjusted while recording is in progress. Select the type of zoom
available for pMOVIE ZOOM TYPE in the setup menu. Selecting 2OPTICAL
blocks sound being recorded when zooming.
Download from Www.Somanuals.com. All Manuals Search And Download.
45
Recording Movies
R Before recording, select a frame size using the OQUALITY option in the shooting
menu. Select h1280 (1280×720) for an aspect ratio of 16:9 (High Definition),
f (640×480) to record standard definition movies, or g (320×240) for longer
movies.
R Focus, exposure, and white balance are adjusted automatically throughout record-
ing. The color and brightness of the image may vary from that displayed before
recording begins.
R Sounds made by the camera may be recorded.
Q The indicator lamp lights while movies are being recorded. Do not open the battery
chamber during shooting or while the indicator lamp is lit. Failure to observe this
precaution could prevent the movie from being played back.
Q Vertical or horizontal streaks may appear in movies containing very bright subjects.
This is normal and does not indicate a malfunction.
Q The temperature of the camera may rise if it is used to record movies for an ex-
tended period or if the ambient temperature is high. This is normal and does not
indicate a malfunction.
46
Download from Www.Somanuals.com. All Manuals Search And Download. Movies
Viewing Movies
100-006
During playback, movies are displayed in the LCD monitor
as shown at right. The following operations can be per-
formed while a movie is displayed:
PLAY
Option
Description
Start/pause Press the selector down to start playback. Press again to
playback pause.
End playback/ Press the selector up to end playback. If playback is not in
delete
progress, pressing the selector up will delete the movie.
Press the selector right to advance, left to rewind. If playback
is paused, the movie will advance or rewind one frame
each time the selector is pressed.
Advance/
rewind
Press MENU/OK to pause playback and display volume con-
trols. Press the selector up or down to adjust the volume
and press MENU/OK to exit. Volume can also be adjusted
from the setup menu.
Adjust voolume
Q Do not cover the speaker during playback.
Movies Download from Www.Somanuals.com. All Manuals Search And Download.
47
Connections
Viewing Pictures on TV
Connect the camera to a TV to show pictures to a group.
Turn the camera off and connect an optional A/V cable as shown below.
1
Connect yellow plug
to video-in jack
Insert into
USB multi-connector
Connect white
plug to audio-in jack
Q When connecting cables, be sure the connectors are fully inserted.
R Image quality may drop during movie playback.
R To view high definition movies on a high definition TV, the optional accessory
is required (P79, 80).
Tune the television to the video input channel. See the documentation
supplied with the television for details.
2
3
Press the abutton for about a second to turn the camera on. The camera
monitor turns off and pictures and movies are played back on the TV. Note
that the camera volume controls have no effect on sounds played on the
TV; use the television volume controls to adjust the volume.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Printing Pictures via USB
If the printer supports PictBridge, the camera can be connected
directly to the printer as shown below and pictures can be printed
without first being copied to a computer. Note that depending on
the printer, not all the functions described below may be supported.
Connect the supplied USB cable as shown and turn the printer on.
1
Press the abutton for about a second to turn the camera on.
Press the selector left or right to display a picture you wish to print.
Press the selector up or down to choose the number of copies (up to 99).
2
3
4
5
Repeat steps 3–4 to select additional pictures. Press MENU/OK to display a
confirmation dialog when settings are complete.
ConnectDioonwsnload from Www.Somanuals.com. All Manuals Search And Download.
49
Printing Pictures via USB
Press MENU/OK to start printing. Printing can be interrupted by pressing
DISP/BACK, but note that some printers may not respond immediately. If the
printer stops before printing is complete, turn the camera off and then on
again.
6
After confirming that PRINTING has cleared from the camera display, turn
the camera off and disconnect the USB cable.
7
R Pictures can be printed from a memory card that has been formatted in the camera.
R If no pictures are selected, the camera will print one copy of the current picture.
R Page size, print quality, and border selections are made using the printer.
Printinng the Daattee ooff RReeccoorrding
To print the date of recording on pictures, press DISP/BACK in the PictBridge display
and select PRINT WITH DATE s in the PictBridge menu (to print pictures without
the date of recording, select PRINT WITHOUT DATE).
50
Download from Www.Somanuals.com. All Manuals Search And DownlCooandn. ections
Printing Pictures via USB
Printing the DPOF Print Order
The KPRINT ORDER (DPOF) option in the playback menu can be used to
create a digital “print order” for PictBridge-compatible printers (P79) or de-
vices that support DPOF.
DPOF
DPOF (Digital Print Order Format) is a standard that allows pictures to be
printed from “print orders” stored on a memory card. The information in
the order includes the pictures to be printed and the number of copies of
each picture.
Select playback mode and press MENU/OK to display the playback menu.
Highlight KPRINT ORDER (DPOF) and press MENU/OK.
1
2
3
Highlight one of the following options and press MENU/OK:
• WITH DATEs: Print the date of recording on pictures.
• WITHOUT DATE: Do not print the date of recording on pictures.
R Some printers do not support date printing. See the printer manual for details.
Press the selector left or right to display a picture you wish to add to or
remove from the print order.
4
ConnectDioonwsnload from Www.Somanuals.com. All Manuals Search And Download.
51
Printing Pictures via USB
Press the selector up or down to choose the number of copies (up to 99).
To remove a picture from the print order, press the selector down until the
number of copies is zero.
5
Repeat Steps 4–5 to complete the print order and press MENU/OK when
settings are complete.
6
7
A confirmation dialog will be displayed. Press MENU/OK to save the print
order.
R Print orders can contain a maximum of 999 pictures.
R If a memory card is inserted containing a print order created by another camera,
a message will be displayed. Create a new print order as described above.
52
Download from Www.Somanuals.com. All Manuals Search And DownlCooandn. ections
Viewingg Picturreess oonn aa CCoommppuutter
The supplied software can be used to copy pictures to a computer, where
they can be stored, viewed, organized, and printed. Before proceeding, install
the software as described below. Do NOT connect the camera to the computer
until installation is complete.
Windows: Installing MyFinePix Studio
Confirm that the computer meets the following system requirements:
1
Windows 7*
Windoows Vista*
Windows XP*
2GHz Pentium 4 or
better
CPU
3GHz Pentium 4 or better
RAM
Free disk space
1GB or more
15GB or more
512MB or more
2GB or more
• 1024×768 pixels or more with 24-bit color or better
• A graphics processing unit (GPU) that supports DirectX 7 or later
Video
• Built-in USB port recommended. Operation is not guaranteed with other
USB ports.
Other
• Internet connection (broadband recommended) required to install .NET
Framework (if necessary), to use auto update feature, and when performing
such tasks as sharing pictures on-line or via e-mail.
* Other versions of Windows are not supported. Only pre-installed operating systems are
supported; operation is not guaranteed on home-built computers or computers that have
been upgraded from earlier versions of Windows.
Start the computer. Log in to an account with administrator privileges be-
fore proceeding.
2
ConnectDioonwsnload from Www.Somanuals.com. All Manuals Search And Download.
53
Viewing Pictures on a Computer
Exit any applications that may be running and insert the installer CD in a
CD-ROM drive.
3
Windoows 7/Wiindows Vista
If an AutoPlay dialog is displayed, click SETUP.EXE. A“User Account Control”dia-
log will then be displayed; click Yes (Windows 7) or Allow (Windows Vista).
The installer will start automatically; click Install MyFinePix Studio and
follow the on-screen instructions to install MyFinePix Studio.
If the Insstaller Dooes Noott SSttart Automatically
If the installer does not start automatically, select Computer or My Computer
from the Start menu, then double-click the FINEPIX CD icon to open the FINEPIX
CD window and double-click setup or SETUP.EXE.
If prompted to install Windows Media Player, DirectX, or .NET Framework,
follow the on-screen instructions to complete installation.
4
5
Remove the installer CD from the CD-ROM drive when installation is com-
plete. Store the installer CD in a dry location out of direct sunlight in case
you need to re-install the software.
Installation is now complete. Proceed to“Connecting the Camera”(P57).
54
Download from Www.Somanuals.com. All Manuals Search And DownlCooandn. ections
Viewing Pictures on a Computer
Macintosh: Installing FinePixViewer
Confirm that the computer meets the following system requirements:
1
CPU
PowerPC or Intel
Pre-installed copies of Mac OS X version 10.3.9–10.6 (visit http://www.fujifilm.
com/support/digital_cameras/compatibility/ for more information)
OS
RAM
256MB or more
A minimum of 200MB required for installation with 400MB available when
FinePixViewer is running
800×600 pixels or more with thousands of colors or better
Free disk space
Video
Built-in USB port recommended. Operation is not guaranteed with other USB
ports.
Other
After starting the computer and quitting any applications that may be run-
ning, insert the installer CD in a CD-ROM drive and double-click Installer
for Mac OS X.
2
3
An installer dialog will be displayed; click Installing FinePixViewer to start
installation. Enter an administrator name and password when prompted
and click OK, then follow the on-screen instructions to install FinePixViewer.
Click Exit to quit the installer when installation is complete.
ConnectDioonwsnload from Www.Somanuals.com. All Manuals Search And Download.
55
Viewing Pictures on a Computer
Remove the installer CD from the CD-ROM drive. Note that you may be
unable to remove the CD if Safari is running; if necessary, quit Safari before
removing the CD. Store the installer CD in a dry location out of direct sun-
light in case you need to re-install the software.
4
Mac OS X 10.5 or earlier: Open the “Applications” folder, start Image Capture,
and select Preferences… from the Image Capture application menu. The
Image Capture preferences dialog will be displayed; choose Other… in
the When a camera is connected, open menu, then select FPVBridge
in the“Applications/FinePixViewer”folder and click Open. Quit Image Cap-
ture.
5
Mac OS X 10.6: Connect the camera and turn it on. Open the “Applications”
folder and start Image Capture. The camera will be listed under DEVICES;
select the camera and choose FPVBridge from the Connecting this cam-
era opens menu and click Choose. Quit Image Capture.
Installation is now complete. Proceed to“Connecting the Camera”(P57).
56
Download from Www.Somanuals.com. All Manuals Search And DownlCooandn. ections
Viewing Pictures on a Computer
Connecting the Camera
If the pictures you wish to copy are stored on a memory card, insert the
card into the camera.
1
R Windows users may require the Windows CD when starting the software for
the first time.
Q Loss of power during transfer could result in loss of data or damage to the mem-
ory card. Charge the battery before connecting the camera.
Turn the camera off and connect
the supplied USB cable as shown,
making sure the connectors are
fully inserted. Connect the camera
directly to the computer; do not
use a USB hub or keyboard.
2
Press the abutton for about a second to turn the camera on. MyFinePix
Studio or FinePixViewer will start automatically; follow the on-screen in-
structions to copy pictures to the computer. To exit without copying pic-
tures, click Cancel.
3
R If the software does not start automatically, it may not be correctly installed.
Disconnect the camera and reinstall the software.
ConnectDioonwsnload from Www.Somanuals.com. All Manuals Search And Download.
57
Viewing Pictures on a Computer
For more information on using the supplied software, start the application
and select the appropriate option from the Help menu.
Q If a memory card containing a large number of images is inserted, there may be a
delay before the software starts and you may be unable to import or save images.
Use a memory card reader to transfer pictures.
Q Make sure that the computer does not display a message stating that copying is in
progress and that the indicator lamp is out before turning the camera off or discon-
necting the USB cable (if the number of images copied is very large, the indicator
lamp may remain lit after the message has cleared from the computer display).
Failure to observe this precaution could result in loss of data or damage to the
memory card.
Q Disconnect the camera before inserting or removing memory cards.
Q In some cases, it may not be possible to access pictures saved to a network server
using the supplied software in the same way as on a standalone computer.
Q The user bears all applicable fees charged by the phone company or Internet ser-
vice provider when using services that require an Internet connection.
58
Download from Www.Somanuals.com. All Manuals Search And DownlCooandn. ections
Viewing Pictures on a Computer
Disconnecting thhee CCamera
After confirming that the indicator lamp is out, turn the camera off and disconnect
the USB cable.
Uninstallling the SSuppliedd SSofttwwaarree
Only uninstall the supplied software when it is no longer required or before begin-
ning reinstallation. After quitting the software and disconnecting the camera, drag
the “FinePixViewer” folder from “Applications” into the Trash and select Empty Trash
in the Finder menu (Macintosh), or open the control panel and use “Programs and
Features”(Windows 7/Windows Vista) or“Add or Remove Programs”(Windows XP) to
uninstall MyFinePix Studio. Under Windows, one or more confirmation dialogs may
be displayed; read the contents carefully before clicking OK.
ConnectDioonwsnload from Www.Somanuals.com. All Manuals Search And Download.
59
Menus
Using tthe Mennuus: Shhooooting Mode
Using the Shooting Menu
To display the shooting menu, press MENU/OK in
shooting mode. Highlight items and press the se-
lector right to view options, then highlight an option
and press MENU/OK. Press DISP/BACK to exit when set-
tings are complete. The options available vary with
the shooting mode selected.
Shooting Menu Options
ASCENE POSSITION
(SP1 defaults to r, SP2 to K)
Choose a scene for the current scene position mode (SP1 or SP2; P21).
NISO
(defaults to AUTO)
Control the camera’s sensitivity to light. Higher values can reduce blur; note, however, that mot-
tling may appear in pictures taken at high sensitivities.
100
Bright
ISO
Scene
3200
Dark
Less noticeable
Nooiissee ((mmottling)
More noticeable
Option
Description
Sensitivity is adjusted automatically in response to shooting condi-
tions.
AUTO
3200 / 16000 / 800 / 400 /
200 / 100
Sensitivity is set to the specified value, which is shown in the display.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus: Shooting Mode
OIMAGE SIZE
(defaults to O4:3)
Choose the image size and aspect ratio at which pictures are record-
ed. Large pictures can be printed at large sizes with no drop in quality,
while small pictures require less memory, allowing more pictures to be
recorded.
O4 : 3
Size Aspect ratio
Size Versus Aspect Ratio
Size
Prints at sizes up to
34×25cm (13.5×10in.)
Option
O
P
24×18cm (9.5×7in.)
17×13cm (7×5in.)
Q
Aspect ratio
4 : 3: Pictures have the same
proportions as the camera
display.
3 : 2: Pictures have the same 16 : 9: Suited for display on
proportions as a frame of
35mm film.
High Definition (HD) devices.
3
2
9
4
3
16
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
61
Using the Menus: Shooting Mode
TIMAGE QUALITY
(defaults to N)
Choose how much image files are compressed.
Option
Description
FINE
Low compression. Select for higher image quality.
NORMAL
High compression. Select this option to store more pictures.
PFINEPIX COLOR
(defaults to <)
Enhance contrast and color saturation or take pictures in black and white.
Option
Description
c F-STANDARD Standard contrast and saturation. Recommended in most situations.
Vivid contrast and color. Choose for vivid shots of flowers or enhanced greens
and blues in landscapes.
a F-CHROME
b F-B&W
Take pictures in black and white.
R Seettttiinnggs otherr than c F-STANDARD aree showwn byy aann iiccoonn iinn tthhee LLCCD monitor.
R Depending on tthe subjeect, the eeffects ooff a F-CHROME mayy not be viisible inn the LCD
monitor.
62
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
Using the Menus: Shooting Mode
DWHITE BALANCE
For natural colors, choose a setting that matches the light source.
(defaults to AUTO)
Option
AUTO
i
Description
White balance adjusted automatically.
For subjects in direct sunlight.
j
For subjects in the shade.
k
Use under“daylight”fluorescent lights.
Use under“warm white”fluorescent lights.
Use under“cool white”fluorescent lights.
Use under incandescent lighting.
l
m
n
R Reessuullttss vvaarryy wwiitthh sshooting cconditionss. Play pictures back after shooting ttoo cchheecckk ccoolloorrss iinn
the LCD monitor.
RCONTINUOUS
(defaults to OFF)
Capture motion in a series of pictures.
Option
Description
ITOP 3 The camera takes up to 3 pictures while the shutter button is pressed.
OFF One photograph is taken each time the shutter-release button is pressed.
R Focuss and expposuree aare deteerminedd by the first frame in each series.
R Thhee flash turns off automatiicallly. Thhee pprreeviouslly selecteed flassh moddee is resstoreed when OFF is
selected for RCONTINUOUS.
R Frame rate varies with shutter speed.
R Thhee nnuummbbeerr of pictures that can be recorded depends on tthe memoory avaiilable.
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
63
Using the Menus: Shooting Mode
bFACE DETECTION
Choose whether the camera automatically detects and sets focus and exposure for human por-
trait subjects (P32).
FAF MODE
This option controls how the camera selects the focus area. Regardless of the option selected,
the camera will focus on the subject in the center of the LCD monitor when macro mode is on.
Option
Description
rCENTER
The camera focuses on the subject in the center of the frame.
Position the subject in the center focus area and press the selector left. Focus will
track the subject as it moves through the frame.
xTRACKING
R Note that iin x mode, tthe camerraa focuses ccontinuoussly, increeaasing the drain on the batteries,
and that the sound of the camera focusing may be audible.
nFACE RECOGNITION (JX400 Series Only)
Add portrait subjects to the face recognition database. These subjects will be given priority
during Intelligent Face Detection, and their names and other information can be viewed during
playback (P33).
PMODE
(defaults to C)
Choose how panoramas are framed (P22).
OQUALITY
(defaults to h)
Choose a frame size for movies (P46).
64
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
Using the Menus: Playyback Mode
Using the Playback Menu
To display the playback menu, press MENU/OK in
playback mode. Highlight items and press the
selector right to view options, then highlight an
option and press MENU/OK. Press DISP/BACK to exit
when settings are complete.
Playback Menu Options
kPHOTOBOOK ASSIST
Create books from your favorite photos (P42).
bIMAGE SEARCH
Search for pictures (P41).
AERASE
Delete all or selected pictures (P40).
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
65
Using the Menus: Playback Mode
jMARK FOR UPLOAD TO
Select pictures for upload to YouTube or Facebook using MyFinePix Studio (Windows only).
■ Selecting Pictures for Upload
Select YouTube to choose movies for upload to YouTube, FACEBOOK to choose photos and
movies for upload to Facebook.
1
Press the selector left or right to display pictures and press MENU/OK to select or deselect. Press
DISP/BACK to exit when all the desired pictures are selected.
2
R Only movviieess ccaann bbee sseelleected for upload to YouTube.
R During pllayback,, selecteed pictuurres arree iinnddiiccaatteedd bby jYouTube or jFACEBOOK icons.
■ RESET ALL: Deselecting All Pictures
Choose RESET ALL to deselect all pictures. If the number of pictures affected is very large, a
message will be displayed while the operation is in progress. Press DISP/BACK to exit before the
operation is complete.
■ Uploading Pictures (Windows Only)
Selected pictures can be uploaded using the YouTube/Facebook Upload option in MyFinePix
Studio.
Select with camera
Upload from computer
For information on installing MyFinePix Studio and connecting the camera to a computer, see
“Viewing Pictures on a Computer”(P53).
66
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
Using the Menus: Playback Mode
ISLIDE SHOW
(defaults to MULTIPLE)
View pictures in an automated slide show. Choose the type of show and press MENU/OK to start.
Press DISP/BACK at any time during the show to view on-screen help. The show can be ended at
any time by pressing MENU/OK.
Option
NORMAL
Description
Press selector left or right to go back or skip ahead one frame. Select FADE-IN
for fade transitions between frames.
FADE-IN
NORMAL g
FADE-IN g
MULTIPLE
As above, except that camera automatically zooms in on faces selected with
Intelligent Face detection.
Display several pictures at once.
R Thhee ccaammeerraa will not turn off autoomaticaally whiile a sliide show is in progress.
BRED EYE REMOVAL
If the current picture is marked with a gicon to indicate that it was taken with Intelligent Face
Detection, this option can be used to remove red-eye. The camera will analyze the image; if red-
eye is detected, the image will be processed to create a copy with reduced red-eye.
Display the desired picture.
1
Select BRED EYE REMOVAL in the playback menu.
2
Press MENU/OK.
3
R Reedd eeyyee mmaayy nnoott bbee rreemmooved if the camera is uunnaabbllee ttoo ddeetteecctt aa ffaaccee oorr tthhee ffaaccee iiss iinn pprroofifillee..
Reessuullttss mmay differ depending on the scceennee.. RRed eeyyee ccaann nnoott bbee rreemoved from piccttuurreess tthhaatt
have already been processed using red--eeye remmovvaall oorr ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevviicceess..
R Thhee aammoouunntt ooff ttiimmee nneeeeddeedd ttoo pprroocceessss tthhee iimmaaggee vvaarriieess wwiitthh tthhee nnuummbbeerr ooff ffaacceess ddeetteecctteedd..
R Copies created with BRED EYE REMOVAL are inndicattedd bby a eicon during playback.
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
67
Using the Menus: Playback Mode
DPROTECT
Protect pictures from accidental deletion.
Select DPROTECT in the playback menu.
1
Highlight one of the following options and press MENU/OK:
2
• FRAME: Protect selected pictures. Press the selector left or right to view pictures and press
MENU/OK to select or deselect. Press DISP/BACK when the operation is complete.
• SET ALL: Protect all pictures.
• RESET ALL: Remove protection from all pictures.
Q Protected pictures will be deleted when the memory card is formatted (P73).
GCROP
Create a cropped copy of the current picture.
Display the desired picture.
1
Select GCROP in the playback menu.
2
Use the zoom control to zoom in and out and use the selector to scroll the picture until the
desired portion is displayed.
3
Press MENU/OK to display a confirmation dialog.
4
Press MENU/OK again to save the cropped copy to a separate file.
5
R Larger crops produce larger copies; all copies have an aspect ratio of 4:3. If tthhee ssiizzee ooff tthhee fifinnaall
copyy wwill be a, OK will be diisplayed iinn yyeelllloow.
68
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
Using the Menus: Playback Mode
ORESIZE
Create a small copy of the current picture.
Display the desired picture.
1
Select ORESIZE in the playback menu.
2
Highlight a size and press MENU/OK to display a confirmation dialog.
Press MENU/OK to save the resized copy to a separate file.
3
4
R Thhee ssiizzeess aavailable vary with the size of the originnal image.
CIMAGE ROTATE
Rotate pictures taken in tall orientation so that they are displayed in tall orientation in the LCD
monitor.
Display the desired picture.
1
Select CIMAGE ROTATE in the playback menu.
2
Press the selector down to rotate the picture 90° clockwise, up to rotate it 90° counterclock-
wise.
3
Press MENU/OK. The picture automatically be displayed in the selected orientation whenever it
is played back on the camera.
4
R Protected pictures can not be rotated. Reemmoove protection before rotating pictures (P68).
R Thhee ccaammeerraa mmaayy nnoott bbee aabbllee ttoo rroottaattee ppiiccttuurreess ccrreeaatteedd wwiitthh ootthheerr ddeevices.
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
69
Using the Menus: Playback Mode
iERASE FACE RECOG. (JX400 Series Only)
Remove face recognition links from the current image. When this option is selected, the cam-
era will zoom in on an area in the current picture that it has matched with a face in the face
recognition database. If the match is not correct, press MENU/OK to remove the link to the face
recognition database.
R Face reccognitiioon links ccan not bbe removed from copies with a size off a or smaller.
KPRINT ORDER (DPOF)
Select pictures for printing on DPOF- and PictBridge-compatible devices (P51).
70
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
The Setup Menu
Using the Setup Menu
Display the setup menu.
1.1 Press MENU/OK to display the menu for the cur-
rent mode.
1
1.2 Press the selector left to highlight the tab for
the current menu.
Tab
1.3 Press the selector down to highlight X.
1.4 Press the selector right to place the cursor in the setup menu.
Adjust settings.
2
Highlight items and press the selector right to view options, then high-
light an option and press MENU/OK. Press DISP/BACK to exit when settings
are complete.
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
71
The Setup Menu
Setup Menu Options
FDATE/TIME
Set the camera clock (P15).
NTIME DIIFFERENCE
(defaults to h)
Switch the camera clock instantly from your home time zone to the local time at your destina-
tion when traveling. To specify the difference between local time and your home time zone:
Highlight gLOCAL and press the selector right.
1
Use the selector to choose the time difference between local time and your home time zone
in increments of 15 minutes.
2
Press MENU/OK.
3
To switch between local time and your home time zone, highlight gLOCAL or hHOME and
press MENU/OK.
Option
Description
hHOME
Switch to the time currently selected for FDATE/TIME (see above).
Switch to local time. If this option is selected, g and the time and date will
be displayed in yellow for three seconds each time the camera is turned on.
gLOCAL
La
(defaults to ENGLISH)
Choose a language (P99).
oSILENT MODE
(defaults to OFF)
Select ON to disable the speaker and flash in situations in which camera sounds or lights may be
unwelcome (note that the flash will still fire in Cmode).
72
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
The Setup Menu
RRESET
Reset all settings except FDATE/TIME, NTIME DIFFERENCE, OBACKGROUND COLOR,
and QVIDEO SYSTEM to default values.
Highlight RRESET and press the selector right to display a confirmation dialog.
1
Highlight OK and press MENU/OK.
2
KFORMAT
This option will format the memory card. When a memory card is inserted in the camera, select
OK to begin formatting.
Q All data—iincluuding pprotectedd picturess——will be deleted from the memmory card.. Be sure im-
portant files have been copied to a compuutteerr oorr ootthheerr ssttoorraaggee ddeevice.
Q Do nott open tthe baattteryy--chambber cover during formatting.
AIMAGE DISP.
(defaults to 1.5 SEC)
Choose how long pictures are displayed in the LCD monitor after shooting.
Option
3 SEC
Description
Pictures are displayed for three seconds (3 SEC) or 1.5 seconds (1.5 SEC).
Colors may differ slightly from those in the final image.
1.5 SEC
ZOOOOMM ((CCOONTINUOUS) Pictures are displayed until the MENU/OK button is pressed.
OFF
Pictures are not displayed after shooting.
R OFF has no effect in continuous shooting mode.
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
73
The Setup Menu
BFRAME NO.
(defaults to CONT.)
New pictures are stored in image files named using a four-digit file
number assigned by adding one to the last file number used. The file
number is displayed during playback as shown at right. BFRAME NO.
controls whether file numbering is reset to 0001 when a new memory Directory
Frame number
100-0001
File
card is inserted or the current memory card is formatted.
number
number
Option
Description
Numbering continues from the last file number used or the first available
file number, whichever is higher. Choose this option to reduce the num-
ber of pictures with duplicate file names.
CONTINUOUS
Numbering is reset to 0001 after formatting or when a new memory card
is inserted.
RENEW
R If the frame number reaches 999-9999, the shutter release will be disabled (P90).
R Seelleectting RRESET (P73) sets BFRAME NO. to CONTINUOUS but does nott reset tthe file
number.
R Frame numbers for pictures taken with other cameras may differ.
GOPERATTIONN VVOL.
(defaults to c)
Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF
(mute) to disable control sounds.
HSHUTTEER VOLUME
(defaults to c)
Adjust the volume of the sounds produced when the shutter is released. Choose eOFF (mute)
to disable the shutter sound.
74
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
The Setup Menu
eSHUTTER SOUND
(defaults to i)
Choose the sound made by the shutter.
IPLAAYYBBAACCKK VVOLUME
Adjust the volume for movie playback.
(defaults to 7)
(defaults to 0)
JLCD BRIGHTNESS
Control the brightness of the display.
R In modes other than P, display brightness is automatically adjusted during sshhoooottiinngg iinn rree--
sponse to ambient lighting conditions, regardless of the option selected for JLCD BRRIGHT-
NESS.
ELCD MODE
(defaults to UON)
Choose whether the display automatically dims to save power.
MAUTO POWER OFF
(defaults to 2 MIN)
Choose the length of time before the camera turns off automatically when no operations are
performed. Shorter times increase battery life; if OFF is selected, the camera must be turned
off manually. Note that in some situations the camera turns off automatically even when OFF
is selected.
LDIGITAL IS
(defaults to OFF)
When AUTOO is seellectedd, imaage staabiliization is pperfoormedd tto reduuce bllur when tthhee ssuubbjjeecctt iiss
poorly lit.
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
75
The Setup Menu
BRED EYE REMOVAL
(defaults to ON)
Choose ON to remove red-eye effects caused by the flash when shooting with Intelligent Face
Detection.
R Reedd--eeyyee rreedduuccttiioonn iiss ppeerfoormed oonly when a face iss ddeetteecctteedd..
mBLINK DETECTION
(defaults to ON)
Choose ON to activate blink detection. If an option other than OFF is selected for AIMAGE
DISP. (P73), a warning will be displayed if the camera detects subjects who may have blinked
when the picture was taken. If ZOOM (CONTINUOUS) is selected, you can press the f button
to zoom in on these subjects.
R Blink deetecttiion is nnot peerformed iff the ccamerraa failss to deetect a facee or whhen OFF iis selected
for AIMAGE DISP..
76
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
The Setup Menu
DDIGITAL ZOOM
(defaults to OFF)
If ON is selected, selecting iat the maximum optical zoom position will trigger digital zoom,
further magnifying the image.
Thhe Zoooomm IInnddicattoor
j
j
i
DIGITAL ZOOM on
DIGITAL ZOOM off
Optical zoom
Optical zoom
Digital zoom
i
Q Digital zooom prrooducess lower quality images than optical zoom.
pMOVIE ZOOM TYPE
(defaults to 1)
Choose the type of zoom available during movie recording.
R Digital zooom prrooducess lower quality images than optical zoom.
R Soouunndd iiss nnoott rreeccoorrddeedd wwhhen opttical zzoom iss used.
Menus Download from Www.Somanuals.com. All Manuals Search And Download.
77
The Setup Menu
nSAVE ORG IMAGE
(defaults to OFF)
Select ON to save unprocessed copies of pictures taken with red-eye removal.
OBACKGROUND COLOR
Choose a color scheme.
cGUIDANCE DISPPLLAY
(defaults to ON)
Choose whether to display tool tips.
QVIDEO SSYSTEM
(defaults to NTSC)
Choose a video mode for connection to a TV.
Option
NTSC
Description
Select this mode for connection to video devices in North America, the Carib-
bean, parts of Latin America, and some East Asian countries.
Select this mode for connection to video devices in the United Kingdom and
much of Europe, Australia, New Zealand, and parts of Asia and Africa.
PAL
78
Download from Www.Somanuals.com. All Manuals Search And Download. Menus
Technical Notes
Oppttiioonnaall AAcccesssoories
The camera supports a wide range of accessories from FUJIFILM and other
manufacturers.
DIGITAL CAMERA
FINEPIX JX400 Series
FINEPIX JX300 Series
■ Printing
■ Audio/Visual
A/V cable (optional)
USB cable
(supplied)
TV*
PictBridge-compatible
printer*
SD/SDHC
memory card
HDMI cable
(sold separately)
HDTV*
Printer*
HDP-L1
HD player
■ Computer Related
USB cable (supplied)
SD card slot or card reader
Computer*
* Available separately.
Download from Www.Somanuals.com. All Manuals Search And Download.
79
Optional Accessories
Accessories from FUJIFILM
The following optional accessories are available from FUJIFILM. For the lat-
est information on the accessories available in your region, check with your
local FUJIFILM representative or visit http://www.fujifilm.com/products/digital_
cameras/index.html.
Rechargeable NP-45A: Additional large-capacity NP-45A rechargeable
Li-ion batteries batteries can be purchased as required.
BC-45W: Replacement battery chargers can be purchased
as required. The BC-45W charges an NP-45A battery in
about 120 minutes at +20°C (+68°F).
Battery
chargers
A/V cable
AV-C1: Use for viewing pictures on TV.
HDP-L1 (requires HDMI cable, available from third-party suppliers): Con-
nect to a High Definition (HD) TV to view photographs
and movies from SD/SDHC memory cards.
HD players
80
Download from Www.Somanuals.com. All Manuals Search And DoTwenclhonadic.al Notes
Caring for the Camera
To ensure continued enjoyment of the product, observe the following pre-
cautions.
Storage and Use
If the camera will not be used for an ■ Water and Sand
extended period, remove the battery Exposure to water and sand can also
and memory card. Do not store or damage the camera and its internal
use the camera in locations that are:
• exposed to rain, steam, or smoke
• very humid or extremely dusty
circuitry and mechanisms. When us-
ing the camera at the beach or sea-
side, avoid exposing the camera to
• exposed to direct sunlight or very water or sand. Do not place the cam-
high temperatures, such as in a era on a wet surface.
closed vehicle on a sunny day
■ Condensation
• extremely cold
Sudden increases in temperature,
• subject to strong vibration
such as occur when entering a heated
• exposed to strong magnetic fields,
building on a cold day, can cause con-
such as near a broadcasting anten-
densation inside the camera. If this
na, power line, radar emitter, motor,
occurs, turn the camera off and wait
transformer, or magnet
an hour before turning it on again. If
• in contact with volatile chemicals
condensation forms on the memory
such as pesticides
card, remove the card and wait for the
• next to rubber or vinyl products
condensation to dissipate.
TechnicaDloNwontelosad from Www.Somanuals.com. All Manuals Search And Download.
81
Caring for the Camera
Cleaning
Use a blower to remove dust from the lens and LCD monitor, then gently wipe
with a soft, dry cloth. Any remaining stains can be removed by wiping gently
with a piece of FUJIFILM lens-cleaning paper to which a small amount of lens-
cleaning fluid has been applied. Care should be taken to avoid scratching the
lens or LCD monitor. The camera body can be cleaned with a soft, dry cloth.
Do not use alcohol, thinner, or other volatile chemicals.
Traveling
Keep the camera in your carry-on baggage. Checked baggage may suffer
violent shocks that could damage the camera.
82
Download from Www.Somanuals.com. All Manuals Search And DoTwenclhonadic.al Notes
Troubleshooting
Problems and Solutions
Power and Battery
Problem
Solution
• Thhee bbaattery is exhausted: Charge the battery (P6) or insert a fully--cchhaarrggeedd ssppaarree bbaatttteery
(P8).
• Thhee bbaattery is inserted inccorrectly: Reinsert in the correct orientation (P8).
• Thhee bbaatttteerry-chamber cover is not latched: Latchh the batttteerryy-chhamber ccoovveerr ((P9).
The camera does not
turn on.
• Thhee bbattery is cold: Warm the battery by placing it in a pocket or other warm place and reinsert
it in thhe cameera immmediattely beefore ttakking a picture.
• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.
The battery runs down • Q is selected for shooting mode: Select Bmode to reduce the drain on the battery
quickly.
(P20).
• xTRACKING is selected for FAF MODE: Select a different AF mode (P64).
• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging
life. Purchase a new battery.
The camera turns off
suddenly.
Charge the battery (P6) or iinsertt a fullly-charged spare battery (P8).
Charging does not start. Reinsert the battery in the correct orientation aanndd mmaakkee ssuurree tthhaatt tthhee cchhaarrggeerr iiss pplluuggggeedd iinn ((P6).
Charging is slow.
Charge the battery at room temperature (Pvi).
• Thheerree iiss ddiirrtt oonn tthhee bbaatttteerryy tteerminals: Clean the terminals with a soft, dryy cloth.
• Thhee bbaatttery has been charggeedd mmaannyy ttiimmes: The battery has reached the end of its charging
life. Purchase a new battery. If the battery still fails to charge, contact your FUJIFILM dealer.
• Thhee bbaatttteerry is too hot or too cold: Wait for the battery temperature to stabilize (P 100).
The charging lamp lights,
but the battery does not
charge.
Download from Www.Somanuals.com. All Manuals Search And Download.
83
Problems and Solutions
Menus and Displays
Problem
Solution
Menus and displays are
not inn English.
Select ENGLISH for La (P15, 72).
Shooting
Problem
Solution
• Memory is full: Insert a new memory card or delete pictures (P9, 40).
• Memory is not formatted: Format the memory card (P73).
• Thheeree iiss ddiirrtt oonn tthhee mmemory cardd ccoonnttacts: Clean the contacts with a soft, dryy cloth.
Noo ppiiccture is taken when • Thhee memory cardd iiss ddaamaged: Insert a new memory card (P9).
the shutter button is
pressed.
• Thhee bbaattery is exhausted: Charge the battery (P6) or insert a fully--cchhaarrggeedd ssppaarree bbaatttteery
(P8).
• Thhee ccaamera has turned off automatically: Turn the camera on (P13).
• Thhee iinnddicator lamp was orange when youu attempptted to recordd aa ppaannoorraammaa: Waiit until
the indicator lamps turns off (P3).
The LCD monitor goes
dark aftter shhooting.
The LCD monitor may darken while the flash charges. Wait for the flash to charge (P29).
• Thhee ssuubbjjeecct is close to the camera: Select macro mode (P28).
• Thhee ssuubject is far away froomm tthhe camera: Cancel macro mode (P28).
• Thhee ssuubbjjeecct is not suited to autofocus: Use focuss lock (P25).
The camera does not
focus.
Macro mode is not
available
Choose a different shooting mode (P20).
Intelligent Face Detection Inteelligennt Facee Detecttion iiss nnoott aavvaaiillaabbllee iinn tthhee ccuurrrreenntt sshhoooottiinngg mmooddee: Chooose a ddiffer-
is not available. ent shooting mode (P20).
84
Download from Www.Somanuals.com. All Manuals Search And DoTwronulobaleds.hooting
Problems and Solutions
Problem
Solution
• Thhee ssuubject’s face is obscureedd bbyy sunglasses, a hat, long haiir, or otthher oobbjjeeccttss: Remove
the obstructions.
• Thhee ssuubject’s face occupies only a small areeaa ooff tthhee ffrraammee: Channge the coommpositioon so that
the subject’s face occupiees a laarrger area off the frame (P25).
Noo fface is detected.
• Thhee ssuubbjjeecct’s head is tilted or horizontal: Ask the subject to hold their head straight.
• Thhee ccaamera is tilted: Keep the camera level (P17).
• Thhee ssuubbjjeecct’s face is poorly lit: Shoot in bright light.
Wrong subject is
selected.
The selected subject is closer to the center of the frame than the main subject. Recompose tthhee
picture or turn face detection off and frraammee tthhee ppiiccttuurree uussiinngg ffooccus lock (P25).
• Thhee flaasshh iiss not available in the cuurrent shoottiing mode: Choose aa different shooting mode
(P20).
• Thhee bbaattery is exhausted: Charge the battery (P6) or insert a fully--cchhaarrggeedd ssppaarree bbaatttteery
(P8).
The flash does not fire.
• Thhee ccaammeerraa is in continuous mode: Select OFF for RCONTINUOUS (P63).
• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P72).
• Thhee flaasshh is off (P): Choose a different flash mode (P29).
• Thhee ddesireedd flflaasshh mmooddee iiss nnoott aavvaaiillable in the curreenntt shooting mode: Choose a different
shooting mode (P20).
• Thhee ccaammeerraa is in silent mode: Turn silent mode off (P72).
Some flash modes are
not available.
• Thhee ssuubbjjeecct is not in range of the flash: Position the subject in range of the flash (P98).
• Thhee flflaasshh wwiinndow is obstructed: Hoolldd tthhee ccamera correctly (P17).
• Thhee ccaamera is zoomed out: Zoom the camera in (P17).
The flash does not fully
light the subject.
• Thhee lleens is dirty: Clean the lens (P82).
• Thhee lleens is blocked: Keep objects away from the lens (P17).
• sis displlayed duriing shootiingg aanndd tthhee ffooccuuss ffrraammee iiss ddiissppllaayyeedd iinn rreedd: Check focus
before shooting (P88).
Pictures are blurred.
• kis displayed during shooting: Use the flash or a tripod (P30).
TroublesDhoowontilnogad from Www.Somanuals.com. All Manuals Search And Download.
85
Problems and Solutions
Problem
Solution
This is normaal wheenn slow sshutteer speeeds are seleccted att high ttemperraturees and does nnot innddicate
a malfunction.
Pictures are mottled.
Vertical lines appear in The camera has been used continuously at high temperatures. Turn the camera off and wait ffoorr
pictures. it to cool down.
“Smear”in the form of Vertical purple or white lines may appeeaarr aaffter the camera has been used continuously at high
vertical purple or white temperatures or when a very bright object is iinn tthhee ffrraammee;; tthhiiss pphheennoommeennoonn iiss ccoommmmoonn ttoo aallll CCCCDD
lines appears in the
display.
image sensors and does not indicate a malfunction. These lines are recorded in movies but do not
appear in photographs. Avoid framing bright objects when filming movies.
Playback
Problem
Solution
Pictures are grainy.
The pictures were taken with a diffeerentt mmake orr modeell of cammera.
Playback zoom is unavail-
able.
The pictures were created using ORESIZE or with a different make or model of camera.
• Playback volume is too low: Adjust playback volume (P75).
• Thhee microopphhoonnee wwaass oobstructed: Hoolldd tthhee ccamera correctly during recording (P17, 45).
• Thhee ssppeaker is obstructed: HHoolldd tthhee ccamera correctly during playback (P47).
• When 2OPTICAL is selected for pMOVIE ZOOM TYPE, zooming blocks
sound beinngg rrecoorded: Select 1DIGITAL for pMOVIE ZOOM TYPE (P77).
Noo ssoouund in movie
playback.
Selected pictures are not Some of the pictures selected for deletion are protected. Remove protection using the device with
deleted
which it was originally applied (P68).
File numbering is
The batteery-chamber cover was opened while the camerra was on.. Turn thee camera ooff before
unexpectedly reset.
opening thhe baatttteerryy-chamberr ccoovveerr ((P13).
86
Download from Www.Somanuals.com. All Manuals Search And DoTwronulobaleds.hooting
Problems and Solutions
Connections/Miscellaneous
Problem
Solution
• Thhee camera is not pprooperly connectted: Connect the camera properly (P48).
• An A/V cablle wass conneectedd durinng movie plaayback: Connnectt the ccaamerraa oonnccee mmoovviiee ppllaayy-
back has ended.
Noo ppiiccture or sound.
• Input on the television is set to “TV”: Set input to “VIDEO”.
• Thhee ccamera is not sett to thee ccorrect viideo staandard: Match the camera QVIDEO SYS-
TEM setting to the TV (P78).
• Thhee vvoolume on the TV is too low: Adjust the volume.
Noo coolor
Match the camera QVIDEO SYSTEM setting to the TV (P78).
The computer does not
recognize the camera.
Be sure the camera and computer are correctly connected (P57).
Pictures can not be
printed.
• Thhee camera is not pprooperly connectted: Connect the camera correctly (P49).
• Thhee pprrinter is off: Turn the printer on.
Only one copy is printed/
the date is not printed.
The printer is not PictBridge compatible.
• Temporary camera malfunction: Remove and reinsert the battery (P8).
• Thhee bbaattery is exhausted: Charge the battery (P6) or insert a fully--cchhaarrggeedd ssppaarree bbaatttteery
(P8).
The camera is unre-
sponsive.
The camera does not
function as expected.
Noo sound.
Remove and reinsert the battery (P8). If the problem persists, contact your FUJIFILM dealer.
Turn silent mode off (P72).
TroublesDhoowontilnogad from Www.Somanuals.com. All Manuals Search And Download.
87
Warning Messaggeess aanndd DDissplayys
The following warnings are displayed in the LCD monitor:
Warning
B(red)
A(blinks red)
k
Description
Low battery. Charge the battery (P6) oor inseert a fuully-charged spare battery (P8).
Battery exhausted. Charge the battery (P6) or innsert aa fullyy-charged spare battery (P8).
Slow shutter speed. Pictures may be blurred; use the flash or a tripod.
The camera can not focuus. Tryy one oof the folloowing solutions:
• Use focuuss locck to ffocuuss oonn aannootthheerr ssuubbjjeecctt aatt tthhee same diistannce, tthhen reccompoose the picture
(P25).
s
(displayed in red with red
focus frame)
• Use macro mode to focuuss wwhheenn ttaakking close-ups (P88).
Aperture or shutter speed The subject is too bright or too dark and the picture will be over- or under-exposed. IIff tthhee ssuubbjjeecctt
displayed in red
is dark, use the flash (P29).
FOCUS ERROR
TURN OFF THE CAMERA
AND TURN ON AGAIN
Camera maalfunnction or moovingg parttss of lens obsttructted. Tuurn thhee cameerra off annd theen on again,
takiinngg ccaarre not to touch the lens. If the message persiists, conntact a FFUUJIFILM ddealer.
• Thhee mmeemmoorryy ccaardd iiss nnoott ffoorrmmaatttteedd oorr wwaass ffoorrmmaatttteedd iinn aa ccoommppuutteerr oorr ootthheerr ddeevviice:
Format the memory card using the KFORMAToption in the camera setup menu (P73).
CARD NOT INITIALIZED • Thhee memory card contacts requiree ccleaning: Clean the contacts with a softt,, ddrryy ccllootthh..
If the messsage is rrepeatedd, format tthe ccaarrdd ((P72). If the message persists, replace the card.
• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.
PROTECTED CARD
BUSY
The memory card is locked. Unlock the card (P9).
The memory card is incorrectly formatted. Use the camera to format the card (P72).
88
Download from Www.Somanuals.com. All Manuals Search And DoTwronulobaleds.hooting
Warning Messages and Displays
Description
Warning
The memory card is not formatted for use in the camera. Format the card (P72).
The memory card contacts require cleaning or the mmeemmoorryy ccaarrdd iiss ddaammaaggeedd.. CClleeaann tthhee ccoonnttaaccttss
withasoftt,, ddry clotthh. If the mmessageisrepeated, formatthheeccaarrdd((P72). Ifthemessagepersists,
replace the card.
CARD ERROR
Incompatible memory card. Use a compatible card (P10).
Camera malfunction. Contact a FUJIFILM dealer.
The memory card is full and pictures can not be recorded oorr ccooppiieedd.. DDeelleettee ppiiccttuurreess oorr iinnsseerrtt aa
memory card with more free space.
bMEMORY FULL
• Memoryy card erroorr oorr ccoonnnneecction erroorr: Reinsert the card or turn the camera off and then
on again. If the message persists, contact a FUJIFILM dealer.
WRITE ERROR
• Noott eennoough memory reemmaaining to reeccordd aaddddiittiioonnal pictureess: Delete pictures or insert
a memory card with more free space.
• Thhee memory cardd iiss nnoot formatted: Format the memory card (P72).
• Thhee fifillee iiss ccoorrupt or was not creeaatteedd with the camera: The file can not be viewed.
• Thhee memory card contacts requiree ccleaning: Clean the contacts with a softt,, ddrryy ccllootthh..
If the messsage is rrepeatedd, formatt tthe ccaarrdd ((P72). If the message persists, replace the card.
• Caammeerra maalfunctiion: Contact a FUJIFILM dealer.
READ ERROR
TroublesDhoowontilnogad from Www.Somanuals.com. All Manuals Search And Download.
89
Warning Messages and Displays
Warning
Description
The camera has run out of frame numbers (current frame number iiss 999999--99999999)).. FFoorrmmaatt tthhee
memory card and select RENEW for BFRAME NO. Take a picture to reset frame num-
bering to 100-0001, then select CONTINUOUS for BFRAME NO. (P74).
FRAME NO. FULL
PRESS AND HOLD
THE DISP BUUTTON TO
DEACTIVATE SILENT MODE
An attempt wwas maade too cchoose a flaasshh mmooddee oorr aaddjjuusstt tthhee vvoolluummee wwiitthh tthhee ccaammeerraa iinn ssiilleenntt
mode. Exit silent mode before choosing a flash mode or adjusting the volume (P72).
A searcch has returned more 5,000 results, or more than 999 frames were selected for deletion.
Perform a different search or select fewer pictures.
An atteempt wwaas madee to deelete or rottate tto a prrootecteed piccture. Remoove prroteccttion and try
TOO MANY FRAMES
PROTECTED FRAME
again (P68).
aCAN NOT CROP
apictures can not be cropped.
CAN NOT CROP
The picture is damaged or was not created with the camera.
An atteempt wwaas madee to crreate a resiized ccopy aatt a sizee equaal to or largger tthhaann tthhee oorriiggiinnaall..
Choose a smaller size.
aCANNOTT EXECUTE
CAN NOT ROTATE
An attempt was made to rotate a picture that can not be rotated.
FCAN NOT ROTATE Movies can not be rotated.
mCANNOT EXECUTE Red-eye removal can not be applied to the selected picture.
FCANNOT EXECUTE Red-eye removal can not be applied to movies.
90
Download from Www.Somanuals.com. All Manuals Search And DoTwronulobaleds.hooting
Warning Messages and Displays
Description
Warning
NO CARD
INSERT A NEEW CARD
Noo mmeemmoorryy ccard inserted; insert a memory card.
NO CARD
DPOF FILE ERROR
CAN NOT SET DPOF
The DPOF print order on the curreent memmory caard contains more than 999 images.
The picture can not be printed using DPOF.
FCAN NOT SET DPOF Movies can not be printed using DPOF.
A connection error occuurrrreedd wwhhiillee picturees werre beiinng printedd or coopied tto a coomputeer or other
device. Confirm that the device is turned on and that the USB cable is connected.
Printer out of paper or ink, or other printer error. Check pprriinntteerr ((sseeee pprriinntteerr mmaannuuaall ffoorr ddeettaaiillss))..
To resume printing, turn the printer off and then turn it back on.
COMMUNICATION ERROR
PRINTER ERROR
PRINTER ERROR
RESUME?
Printer out of paper or ink, or other printer error. Check printer (see printer manual for details). If
printing does not resume automatically, press MENU/OK to resume.
An attempt was made to print a movie, a picture not ccrreeaatteedd wwiitthh tthhee ccaammeerraa,, oorr aa ppiiccttuurree iinn aa
format not supported by the printer. Movies and some pictures created with other devices can
CANNOT BE PRINTED not be printed; if the picture is a still picture created with the camera, check tthhee printer mmaannuuaall
to confirm that the printer supports the JFIF-JPEG oorr EExxiiff--JJPPEEGG ffoorrmmaatt.. IIff iitt ddooeess nnoott,, tthhee ppiiccttuurreess
can not be printed.
TroublesDhoowontilnogad from Www.Somanuals.com. All Manuals Search And Download.
91
Appendix
Tips and Tricks
The following tips and tricks will help you get the most from your camera.
Battery Performance
Choose the following settings for improved battery performance:
• bFACE DETECTION (P32): OFF
• FAF MODE (P64): rCENTER
• ELCD MODE (P75): UPOWER SAVE ON
Thhee SSeellff-timer
• To prevent blur caused by the camera moving when the shutter button is pressed,
use the two-second timer.
• To turn the timer off, press DISP/BACK.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips and Tricks
Intelligent Face Detection
When ON is selected for bFACE DETECTION (P93), you can:
• Zoom in on faces when ZOOM (CONTINUOUS) is selected for AIM-
AGE DISP. (P73).
Shooting
• Remove red-eye by selecting ON for BRED EYE REMOVAL (P67).
• Zoom in on faces during slide shows (P67) or by pressing the selector
down during playback.
Playback
• Search for faces using bIMAGE SEARCH (P41).
• Crop the background from portraits using GCROP (P67).
• Print one copy for each person in the photo.
Printing
AppendDixownload from Www.Somanuals.com. All Manuals Search And Download.
93
Tips and Tricks
Proo TTips
• To photograph backlit subjects, select CNATURAL & Nfor
shooting mode (P20) and position your subject in the center
of the frame.
• To photograph subjects that are in motion, select xTRACK-
ING for FAF MODE (P64).
• To photograph night scenes, raise sensitivity (
flash on ( 29).
P
60) and turn the
P
94
Download from Www.Somanuals.com. All Manuals Search And DownloaAd.ppendix
Memory CCaarrdd CCaappaacciitty
The following table shows the recording time or number of pictures available
at different image sizes. All figures are approximate; file size varies with the
scene recorded, producing wide variations in the number of files that can be
stored. The number of exposures or length remaining may not diminish at an
even rate.
■ FinePix JX400 Series, JX350 to JX395
Medium
O
2 GB
4 GB
8 GB
FINE
240
270
310
470
700
920
1680
NORMAL
470
530
620
920
1340
1740
3040
FINE
480
540
640
940
1400
1840
3360
NORMAL
950
FINE
970
NORMAL
1910
2130
2510
3680
5380
6980
12160
T
O4:3
O3:2
O16:9
P4:3
P16:9
P4:3
Q16:9
h1280†
f
1060
1250
1840
2690
3490
6080
1080
1280
1890
2810
3690
6720
9min.
18min.
55min.
116min.
37min.
111min.
233min.
27min.
58min.
g
* Individual movies can not exceed 2GB in size or 29minutes in length. If more than 2GB are
available, the camera will show the time remaining for a movie 2GB in size.
†Use a G card or better when shooting HD movies.
AppendDixownload from Www.Somanuals.com. All Manuals Search And Download.
95
Memory Card Capacity
■ FinePix JX300 to JX345
Medium
O
2 GB
4 GB
8 GB
FINE
270
310
360
530
700
1150
1680
NORMAL
540
610
FINE
550
620
NORMAL
1090
1220
1430
2060
2690
4290
6080
FINE
NORMAL
2180
2440
2870
4120
5380
8580
12160
T
O4:3
O3:2
O16:9
P4:3
P16:9
P4:3
Q16:9
h1280†
f
1110
1240
1470
2130
2810
4600
6720
710
730
1030
1340
2140
3040
1060
1400
2300
3360
9min.
18min.
55min.
116min.
37min.
111min.
233min.
27min.
58min.
g
* Individual movies can not exceed 2GB in size or 29minutes in length. If more than 2GB are
available, the camera will show the time remaining for a movie 2GB in size.
†Use a G card or better when shooting HD movies.
96
Download from Www.Somanuals.com. All Manuals Search And DownloaAd.ppendix
Specificaattions
System
Model
Effective pixels
Digital Camera FinePix JX400 Series/JX300 Series
FinePix JX400 Series/FinePix JX350 to JX395: 16 million
FinePix JX300 to JX345: 14 million
/
CCD
-in., square-pixel CCD with primary color filter
Storage media
File system
SD/SDHC memory cards
Compliant with Design Rule for Camera File System (DCF), Exif 2.3, and Digital Print Order
Format (DPOF)
File format
• Still pictures: Exif 2.3 JPEG (compressed) • Movies: AVI-format Motion JPEG
Image size (pixels)
FinePix JX400 Series/FinePix JX350 to JX395
• O4 : 3: 4,608 × 3,440
• P4 : 3: 3,264 × 2,448
• Q4 : 3: 2,304 × 1,728
• O3 : 2: 4,6088 × 3,0772
• O16 : 9: 4,608 × 2,592
• P16 : 9: 3,072 × 1,728
• Q16 : 9: 1,920 × 1,080
FinePix JX300 to JX345
• O4 : 3: 4,288 × 3,216
• O3 : 2: 4,2888 × 2,8664
• O16 : 9: 4,288 × 2,416
• P16 : 9: 3,072 × 1,728
• Q16 : 9: 1,920 × 1,080
• P4 : 3: 3,072 × 2,304
• Q4 : 3: 2,048 × 1,536
Leens
Focal length
Digital zoom
Fujinon 5 × optical zoom lens, F2.6 (wide angle) – F6.2 (telephoto)
f=5.0 mm–25.0 mm (35-mm format equivalent: 28 mm–140 mm)
FinePix JX400 Series/FinePix JX350 to JX395
Approx. 7.2 × (up tto 36 ×× wwhen coombinned wiitth optiical zoom)
FinePix JX300 to JX345
Approx. 6.7 × (up too 33.5 ×× when ccombinned witth optiical zoom)
Aperture
Focus range
F2.6/F8.0 (wide angle), F6.2/F20.0 (telephoto); uses Neutral Density (ND) filter
Approx. 45 cm ((11..44 fft.)–infinity (wide angle); 80 cm (2.66 fft.))–infinity (telephoto)
(distance from front of lens) • Maaccrro: approx. 100 ccmm––8800 ccmm//00..33 fftt..––22..66 fftt.. (wide angle); 80 cm––11..22 mm//22..66 fftt..––33..99 fftt.. (telephoto)
Sensitivity
Sttaannddaarrdd oouuttput sensitivity equivalent to ISO 100, 200, 400, 800, 1600, 32000 (imagge size Q);
AUTO
AppendDixownload from Www.Somanuals.com. All Manuals Search And Download.
97
Specifications
System
Metering
256-segment through-the-lens (TTL) metering
Exposurre control
Programmed AE
/
Exposure compensation –2 EV – +2 EV in increments of EV
Image stabilization
Shutter speed
Digital image stabilization
/
/
• Auto mode: s– s
/
(combined mechaniccal and • Other modes: 8 s– s
electronic shutter)
Coonnttiinnuuous
FinePix JX400 Series/FinePix JX350 to JX395
Up to 1.1 fps; max. 3 frames
FinePix JX300 to JX345
Up to 1.2 fps; max. 3 frames
Focus
• Mode: Single AF, continuous AF
• Autofoocus syystem: Contrast-detect TTL AF
• Focus--area selection: CENTER , TRACKING
White balance
Automatic scenee deteecction;; six maanual ppreset modess for diirect ssunligght, shhade, dayliight flfluuores-
cent, warm white fluorescent, cool white fluorescent, and incandescent
Self-timer
Flash
Off, 10 sec., 2 sec.
CCD-metered auto flash control; effective range when sensitivity is set to AUTOO is approx.
40 cm–33..00 mm//11..33 fftt..––99..88 fftt.. (wide anngle)), 80 cm––22..00 mm//22..66 fftt..––66..55 fftt.. (telephoto); effffective rrange
in macro mooddee iiss aapppprrooxx.. 3300 ccmm––8800 ccmm//00..99 fftt..––22..66 fftt.. (wide angle), 80 cm–11..22 mm//22..66 fftt..––33..99 fftt..
(telephoto)
Flash mode
Auto, filll flashh, off,, sslow ssyync (reed-eyee remmooval off); aauto with reed-eyyee removvaall,, fifillll flflaasshh wwiitthh rreedd--
eye removal, off, slow sync with red-eye removal (red-eyye remmooval on)
LCD monitor
Movies
2.7-in., 230k-dot color LCD monitor; frame coverage approx. 96%
Frame size 1,280 × 720, 640 × 480, 320 × 240; 30 fpss; monaural sound
98
Download from Www.Somanuals.com. All Manuals Search And DownloaAd.ppendix
Specifications
System
Languages
Arabic, Bulgarian, Simplified CChinese,, Traditioonal Chinese, Czech, Danish, Dutch, Enngglliisshh,, FFaarrssii,,
Finnish, French, German, Greek, Heebbrreeww,, HHuunnggaarriiaann,, IInnddoonneessiiaann,, IIttaalliiaann,, JJaappaanneessee,, KKaazzaakkhh,,
Koreaan, Laattvian,, Lithhuaniaan, Norwegian, Polish, PPortuguesee, Rommaniaann, Russsian,, Seerrbbiiaann,,
Slovak,, Spanishh, Swweeddiisshh,, TThhaaii,, TTuurrkkishh, UUkkrainniian, Viettnamese
Input/output terminals
A/V OUT (aaudio//videeoo oouuttppuutt)) NTSC or PAL output with monaural sound
Digital input/output
USB 2.0 High-Speed; shares A/V OUT connector; MTP/PTP
Power supply/other
Power supply
NP-45A rechargeable battery
Battery life (approximate
numberr of fraames thhaatt ccan
be takeen withh a fullly-charged
battery)
Battery type
NP-45A (type supplied with camera)
Approoximate number of frames
180
CIPA standard, measured in B(auto) mode using battery supplied withh camera and SD mem-
ory card.
Notte: NNumberr of shhoots thhaat can be takken wiitth batttery vvariess withh bbatteerry charge leevel aannd wwiillll
decline at low temperatures.
Caammeerra dimmensions
FinePix JX400 Series
(W × H × D)
94.0 mm × 55.7 mm × 23.3 mm/3.7 in. × 2.1 in. × 00.9 in.
excluding projections (minimum depth 16.7 mm/0.6 in.)
FinePix JX300 Series
94.0 mm × 55.7 mm × 23.7 mm/3.7 in. × 2.1 in. × 00.9 in.
excluding projections (minimum depth 18.5 mm/0.7 in.)
Caammera wweight
Shooting weight
Operating conditions
Approx. 113 g/4.0 oz., excluding battery, accessories, and memory card
Approx. 130 g/4.6 oz., including battery and memory card
• Temperratuurre: 0 °C – +40 °C/+32 °F – +104 °F
• Humidity: 10 % – 80 % (no condensation)
AppendDixownload from Www.Somanuals.com. All Manuals Search And Download.
99
Specifications
NP-45A rechargeable battery
Noommiinnaall voltage
Noommiinnaall capacity
DC 3.7V
720 mAh
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 31.0 mm × 39.6 mm × 6.0 mm/1.2 in. × 1.5 in. × 0.2 in.
Weight
Approx. 15.5 g/0.5 oz.
BC-45C battery charger
Rated input
Input capacity
100V–240V AC, 50/60 Hz
• 100 V: 8.0VA
• 240 V: 12VA
Rated output
4.2V DC, 550 mA
Supported batteries
Charging time
NP-45A rechargeable batteries
Approx. 110 minutes (+20 °C/+68 °F)
Operating temperattuurre 0 °C – +40 °C/+32 °F – +104 °F
Dimensions (W × H × D) 46.2 mm × 90.0 mm × 27.6 mm/1.8 in. × 3.5 in. × 1.0 in., excluding projections
Weight Approx. 63 g/2.2 oz., excluding battery
Weight and dimensions may vary with the country or region of sale.
100
Download from Www.Somanuals.com. All Manuals Search And DownloaAd.ppendix
Specifications
■ Noottiices
• Specifications subject to change without notice. FUJIFILM shall not be held liable for
damages resulting from errors in this manual.
• Although the LCD monitor is manufactured using advanced high-precision technol-
ogy, small bright points and anomalous colors may appear, particularly in the vicinity
of text. This is normal for this type of LCD monitor and does not indicate a malfunc-
tion; images recorded with the camera are unaffected.
• Digital cameras may malfunction when exposed to strong radio interference (e.g.,
electric fields, static electricity, or line noise).
• Due to the type of lens used, some distortion may occur at the periphery of images.
This is normal.
AppendDixownload from Www.Somanuals.com. All Manuals Search And Download.
101
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN
http://www.fujifilm.com/products/digital_cameras/index.html
Download from Www.Somanuals.com. All Manuals Search And Download.
Restrictions on Camera Settings
The options available in each shooting mode are listed below.
Shooting Mode
Option
Q B P C D L Y K MrNO
H
PQ
R
SU V
✔ ✔ ✔1
✔ ✔ ✔
W
✔
F
✔1 ✔
✔
AUTO
N
✔ ✔ ✔
✔ ✔ ✔ ✔1
✔
✔
✔
✔
✔
✔
✔
BOFF
O
P
✔ ✔
✔ ✔ ✔ ✔1 ✔ ✔ ✔
✔ ✔ ✔1
✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔1
✔
✔1 ✔ ✔1 ✔ ✔1
✔1 ✔
N
K
L
M
P
✔
✔
✔
✔
✔
✔
✔
✔
✔ ✔ ✔
BON
✔ ✔
✔ ✔
✔ ✔ ✔
✔ ✔ ✔
h
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔2 ✔ ✔ ✔ ✔
✔2 ✔ ✔ ✔ ✔ ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔1
F
H
F
d
✔
✔1 ✔1 ✔ ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
AUTO
3200
1600
800
400
200
✔
✔
✔
✔
✔
✔
N
100
O
P
Q
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔3 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
O
h1280
f
✔
✔
✔
g
Download from Www.Somanuals.com. All Manuals Search And Download.
Restrictions on Camera Settings
Shooting Mode
Q B P C D L Y K MrNO
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
Option
H
PQ
R
SU V
WF
FINE
T
P
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
NORMAL
c
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
a
✔ ✔ ✔ ✔
✔
b
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
D
✔
✔
ON
OFF
ON
OFF
r
x
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
R
b
F
✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔1 ✔ ✔ ✔ ✔ ✔ ✔ ✔1
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔1 ✔1 ✔1 ✔1
✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔1 ✔1 ✔1 ✔ ✔ ✔1 ✔ ✔ ✔ ✔ ✔1 ✔1
✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1 ✔1
P
n4
E
M
L
B
m
D
✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔ ✔
✔
✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔
✔
✔
✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
✔ ✔ ✔
✔ ✔ ✔ ✔
✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔ ✔
1 Automatically optimized for selected shooting mode.
2 The camera automatically analyzes and selects macro mode ON/OFF.
3 Aspect ratio fixed at 4 : 3.
4 JX400 series only.
Download from Www.Somanuals.com. All Manuals Search And Download.
|