Home Comfort
Through-The-Wall
Air Conditionerꢀ/ꢀHeater
FRA08EHT1
Product Dimensions
Height
Width
Depth
14-1/2"
24"
20-1/2"
More Easy-To-Use Features
Effortless™ Clean Filter
Our antibacterial filter reduces bacteria,
room odors and other airborne particles
for a cool, comfortable environment.
Multi-Speed Fan
Features three different fan speeds, for
more cooling flexibility.
Sleep Mode
Quiet operation keeps you cool without
keeping you awake. Plus, Sleep Mode
gradually increases room temperature
after being activated.
Quickly Cools
Quickly cool a room on hot days.
Comfort Control Design
Easily control the direction of your cool air,
wherever your unit is.
Effortless™ Restart
Automatically resumes operating at its
previous settings when power is restored
to your unit.
Clean Filter Alert
Notifies you when your filter needs to be
cleaned.
Power Cord
Comes with an extra long three-prong
cord that makes extension cords
unnecessary.
Signature Features
Effortless™ Temperature
Control
Our air conditioners maintain the preset
room temperature, so you will remain
comfortable at all times.
Ready-Select® Controls
Easily select options with the touch of a
button.
SpaceWise® Adjustable Design
Optional Side Panels
Extend so you can adjust your unit to fit
your window.
24-Hour On/Off Timer
Keep things cool on your schedule.
Performance
BTUs
Supplemental Heat Only
Our versatile unit offers a supplemental
heating capability, providing you with an
additional heat source when needed.
Remote Control
Allows you to precisely control the
temperature and fan speed from across
the room.
Cool
Heat
8,000
4,200
frigidaire.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Home Comfort
FRA08EHT1
Through-The-Wall Air Conditionerꢀ/ꢀHeater
Plug Type (NEMA)
5-15P
Home Comfort Specifications
Replacement Installation
•
•
•
Product Shipping Weight (approx.) – 73 Lbs.
When replacing existing air conditioner with new unit, refer to
Product Installation Guide on web to identify existing wall-sleeve
manufacturer and size compatibility. If proper installation and slope
are suspect, then correct installation of Frigidaire® Through-The-Wall
18" Sleeve Kit PNꢀ#EA108T recommended.
An electrical supply with grounded three-prong receptacle is
required. The power supply circuit must be installed in accordance
with current edition of National Electrical Code (ANSI/NFPA 70)
and local codes & ordinances.
•
•
Use of existing wall sleeve to mount new unit requires original sleeve
be in sound structural condition with rear grille that attaches securely,
or rear flange that serves as stop for unit.
Preferable installation option, for increased efficiency and possibility
of drafts reduced, requires existing rear grille (mounted to sleeve) be
replaced with new unit’s rear air-directional louvered grille (provided
in accessory kit, shipped with unit). Non-preferable installation option
of directly mounting rear louvered grille to unit can be considered,
requiring grille be mounted to unit prior to sleeve installation.
Existing decorative exterior grille may be left in place, provided that
proper air-directional rear louvered grille is installed.
For installation into larger existing sleeve, optional Trim Kit
PNꢀ# EA120T available.
•
•
•
•
Voltage Rating – 115Vꢀ/ꢀ60 Hzꢀ/ꢀ15 Amps
Amps @ 115 Volts = (Cool) 8 Ampsꢀ/ꢀ(Heat) 11.6 Amps
Recommended Circuit Breaker – 15 Amps
Unit equipped with 115V 3-wire power supply cord, NEMA plug type
5-15P, approximately 72" long.
Unit’s increased performance characteristics result from two rear
intakes. For unit to operate at maximum efficiency, carefully follow
complete, detailed new or replacement installation instructions
provided in Product Installation Guide on web.
•
•
•
•
Unit requires rearward slope when installation is complete, to allow
condensate to drain from rear of sleeve.
New Installation
•
Note: For planning purposes only. Refer to Product Installation Guide
on the web at frigidaire.com for detailed instructions.
For new installation, Frigidaire® Through-The-Wall 18" Sleeve Kit
PNꢀ#EA108T available. Recommended for proper installation.
•
•
Through-the-wall installation requires 18" maximum wall thickness.
Optional Accessories
For energy-saving purposes, install unit in shady location, preferably
a northern exposure; and do not block airflow inside with blinds,
curtains or furniture; or outside with shrubs, enclosures or other
buildings.
•
•
•
Through-The-Wall 18" Sleeve Kit – (PNꢀ# EA108T).
Trim Kit (for larger existing sleeve) – (PNꢀ# EA120T).
Architectural-Style Exterior Louvered Grille – (PNꢀ# EA109T).
•
•
•
•
USA 10200 David Taylor Drive Charlotte, NC 28262 1-800-FRIGIDAIRE frigidaire.com
Specifications
subject to change.
•
•
•
•
CANADA 5855 Terry Fox Way Mississauga, ON L5V 3E4 1-800-265-8352 frigidaire.ca
FRA08EHT1 04/11 © 2011 Electrolux Home Products, Inc.
Printed in the U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|