Frigidaire Air Conditioner FRA123KT1 User Manual

All about the  
Use&Care  
of your  
Room Air Conditioner  
TABLE OF CONTENTS  
Important Safety Instructions ............................... 2  
Product Registration ............................................. 3  
Normal Sounds .................................................... 3  
Air Conditioner Features ....................................... 4  
Operating Instructions .......................................... 4-9  
.............................................. 9  
Care and Cleaning  
Energy Saving Ideas ........................................... 9  
Before You Call ................................................... 10  
Major Appliance Warranty ................................... 11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Product Registration & Normal Sounds  
Record Your Model and Serial Numbers  
Product Registration  
Record in the space provided below the model and serial numbers. On all models, the  
serial plate is located on the outside of the cabinet.  
Model No.  
Serial No.  
Register Your Product  
The self-addressed PRODUCT REGISTRATION CARD should be filled in completely,  
signed and returned to the Frigidaire Company.  
Normal Sounds  
High pitched Chatter  
Today’s high efficiency compressors  
may have a high pitched chatter  
during the cooling cycle.  
Vibration  
Unit may vibrate and make noise  
because of poor wall or window  
construction or incorrect installation.  
Sound of Rushing Air  
At the front of the unit, you may  
hear the sound of rushing air  
being moved by the fan.  
Pinging or Swishing  
Droplets of water hitting condenser  
during normal operation may cause  
“pinging or swishing” sounds.  
Gurgle/Hiss  
“Gurgling or hissing” noise may be heard  
due to refrigerant passing through  
evaporator during normal operation.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Air Conditioner Features & Operating Instructions  
ELECTRONIC CONTROL  
Before you begin, thoroughly familiarize yourself with the control panel and remote  
as shown below and all its functions, then follow the symbol for the functions you  
desire. The unit can be controlled by the touch pad alone or with the remote.  
Air Conditioner Features  
ADJUSTS  
TEMPERATURE  
OR TIME  
DISPLAYS  
TEMPERATURE/TIME  
EXHAUST SELECTOR  
CHECK FILTER  
RESET BUTTON  
ACTIVATES  
TIMER  
TURNS UNIT  
ON OR OFF  
SETS FAN  
SPEED  
SETS MODE  
SLEEP MODE  
Battery Size: AAA  
Warning: Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable  
(nickel-cadmium) batteries.  
STANDARD REMOTE  
Operating Instructions  
NOTE  
The following instructions represent the Touch Pad, the same instructions can be used for the Remote Control.  
TO TURN UNIT ON:  
YOU WILL SEE:  
DO THIS:  
PRESS ON/OFF  
BUTTON  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Operating Instructions  
(continued)  
TO CHANGE TEMPERATURE SETTlNG:  
YOU WILL SEE:  
Note: Tap or hold either up (  
) or down (  
) button until  
DO THIS:  
the desired temperature is seen on the display. This tempe-  
rature will be automatically maintained anywhere between  
60 °F (16 °C) and 90 °F (32 °C) . If you want the display to  
read the actual room temperature. See "To Operate on Fan  
Only" section on Page 6.  
PRESS  
PRESS  
TO RAISE  
TO LOWER  
TO ADJUST FAN SPEEDS:  
YOU WILL SEE:  
DO THIS:  
PRESS TO SELECT  
TO USE AUTO FAN FEATURE:  
YOU WILL SEE:  
DO THIS:  
PRESS FAN BUTTON  
CHOOSE AUTO  
Note: Fan starts at High Speed and adjusts to a slower speeds the room temperature dictates. For example, if the room doesn't  
get too warm, it will stay at the slowest speed. If the room temperature rises quickly, such as a door being opened, it will auto-  
matically go to the highest speed. The fan speeds will re-adjust back to the slowest speed as the room returns to the original set  
temperature. Press either the fan slower or fan faster button to adjust the fan speed manually.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Operating Instructions  
(continued)  
TO OPERATE ON FAN ONLY:  
YOU WILL SEE:  
Note: Use this function only when cooling is not desired,  
such as for room air circulation or to exhaust stale air on  
some models. (Remember to open the vent during this  
function, but keep it closed during cooling for maximum  
cooling efficiency.) You can choose any fan speed you  
prefer. (Except “Auto Fan”).  
During this function, the display will show the actual room  
temperature, not the set temperature as in the cooling  
mode.  
DO THIS:  
PRESS  
MODE BUTTON  
CHOOSE  
FAN ONLY  
YOU WILL SEE:  
TO USE THE ENERGY SAVER FEATURE:  
Note: In this mode, the fan will continue to run for 1 minu-  
te after the compressor shuts off. The fan then cycles on  
for 20 seconds at 10 minute intervals until the room tempe-  
rature is above the set temperature, at which time the com-  
pressor turns back on.  
DO THIS:  
PRESS  
MODE BUTTON  
CHOOSE  
ENERGY SAVER  
SLEEP FEATURE:  
YOU WILL SEE:  
Note: In this mode the selected temperature will increase  
by 2 °F 30 minutes after the mode is selected. The tempe-  
rature will then increase by another 2 °F after an additional  
30 minutes. This new temperature will be maintained for 7  
hours before it returns to the originally selected tempera-  
ture. This ends the "Sleep" mode and the unit will continue  
to operate as originally programmed. The "Sleep" mode  
program can be cancelled at any time during operation by  
again pressing the "Sleep" button.  
DO THIS:  
PRESS  
SLEEP BUTTON  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Operating Instructions  
(continued)  
TIMER: DELAY STOP / START FEATURE  
YOU WILL SEE HOW MUCH TIME IS CHOSEN:  
Note: For Delay Stop, the unit must be in the On position.  
Note: For Delay Start, the unit must be in the Off position.  
First, Press TIMER button, then adjust timer setting, tap or  
FIRST  
DO THIS:  
PRESS  
TIMER BUTTON  
hold the UP arrow (  
) or the DOWN arrow (  
) to  
change delay timer at 0.5 hour increments, up to 10 hours,  
then at 1 hour increments up to 24 hours. The control will  
count down the time remaining until start (8, 7.5, 7, etc.).  
The Delay Start Operation automatically selects cooling with  
maximum Fan speed (if Cool, Energy Saver, or Fan Only was  
the last mode selected) . The temperature maintained will  
be the same as previously set. To change the set tempera-  
ture, press "COOL" then Up or Down arrows until the de-  
sired temperature is indicated on the display. After 5 se-  
conds, the control will automatically change the display back  
to the hours remaining until the unit will start/stop. Pressing  
the unit On/Off button at any time will cancel the Delay  
Start/Stop function. The Delay Start/Stop Feature will work  
until the unit either starts or stops. Once that happens the  
above steps have to be repeated again.  
THEN  
DO THIS:  
PRESS  
UP/DOWN  
SET BUTTONS  
CHECK FILTER FEATURE, YOU WILL SEE:  
Note: This feature is a reminder to clean the Air Filter (See  
Care and Cleaning) for more efficient operation. The LED  
(light) will illuminate after 250 hours of operation. To reset  
after cleaning the filter, press the "Filter Reset" button and  
the light will go off.  
DO THIS:  
PRESS FILTER  
RESET BUTTON  
FAULT CODES:  
If the display reads "AS" , a sensor has failed. Contact your  
Authorized Frigidaire Service Center.  
If the display reads "ES" , a sensor has failed. Contact your  
Authorized Frigidaire Service Center.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions  
Operating Instructions  
(continued)  
TO CHANGE TEMPERATURE DISPLAY:  
YOU WILL SEE:  
DO THIS:  
PRESS AND HOLD THE  
UP/DOWN BUTTONS  
TOGETHER FOR 3 SECONDS  
Note: The control is capable of displaying temperature in degrees Fahrenheit or degrees Celsius.  
TO TURN UNIT OFF:  
YOU WILL SEE:  
DO THIS:  
PRESS  
ON/OFF BUTTON  
ADDITIONAL THINGS YOU SHOULD KNOW  
Now that you have mastered the operating procedure, here are more features in your control that you should become familiar with.  
The "Cool" circuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly.  
This prevents overheating of the compressor and possible circuit breaker tripping. The fan will continue  
to run during this time.  
There is a 2-Second delay for the compressor shutting down when selecting FAN ONLY. This is to cover the possibility of having  
to roll through to select another mode.  
The control will maintain the set temperature within 2 degrees Fahrenheit, between 60F and 90F degrees.  
After a power outage, the unit will memorize the last setting and return the unit to the same setting once power is restored.  
EXHAUST CONTROL  
This Exhaust Control allows the air conditioner to either recirculate inside air (CLOSED) or exhaust air to the outside (OPEN).  
The CLOSED position is used when maximum cooling is desired. It may also be used for air recirculation without cooling when the  
air conditioner is set in any FAN position.  
The OPEN position removes stale air from the room and exhausts it to the outside. Fresh air is drawn in through normal passages  
in the home.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operating Instructions, Care and Cleaning & Energy Saving Ideas  
Operating Instructions  
(continued)  
4-WAY LOUVERS  
The 4-Way air directional louvers allow you to direct  
the air flow Up or Down and Left or Right throughout  
the room as needed.  
Clean your air conditioner occasionally to keep it looking new. Be sure to unplug  
Care and Cleaning  
the unit before cleaning to prevent shock or fire hazards.  
Air Filter Cleaning  
The air filter should be checked at least once a month to see if cleaning is  
necessary. Trapped particles in the filter can build up and cause an accumulation  
of frost on the cooling coils.  
Grasp the filter by the center and pull up and out.  
Wash the filter using liquid dishwashing detergent and warm water. Rinse filter  
thoroughly. Gently shake excess water from the filter. Be sure filter is  
thoroughly dry before replacing  
Or instead of washing, you may vacuum the filter clean.  
Cabinet Cleaning  
Be sure to unplug the air conditioner to prevent shock or fire hazard. The  
cabinet and front may be dusted with an oil-free cloth or washed with a cloth  
dampened in a solution of warm water and mild liquid dishwashing detergent.  
Rinse thoroughly and wipe dry.  
Never use harsh cleaners, wax or polish on the cabinet front.  
Be sure to wring excess water from the cloth before wiping around the controls.  
Excess water in or around the controls may cause damage to the air conditioner.  
Plug in air conditioner.  
Winter Storage  
If you plan to store the air conditioner during the winter, remove it carefully from  
the window according to the installation instructions. Cover it with plastic or return  
it to the original carton.  
NOTE:To prevent rust or electrical connections from being damaged, store air  
conditioner in an upright position and a dry place.  
Do not block air flow inside with blinds, curtains or furniture; or outside with  
shrubs, enclosures, or other buildings.  
Energy Saving Ideas  
The capacity of the room air conditioner must fit the room size for efficient and  
satisfactory operation.  
Install the room air conditioner on the shady side of your home. A window that faces  
north is best because it is shaded most of the day.  
Close the fireplace damper, floor and wall registers so cool air does not escape up  
the chimney and into the duct work.  
Keep blinds and drapes in other windows closed during the sunniest part of the day.  
Clean the air filter as recommended in the section “Care and Cleaning.  
Proper insulation and weather stripping in your home will help keep warm air out  
and cool air in.  
External house shading with trees, plants or awnings will help reduce the air  
conditioner’s work load.  
Operate heat producing appliances such as ranges, washers, dryers and dishwashers  
during the coolest part of the day.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Before You Call  
Before calling for service, review this list. It may save you time and expense. This list includes common occurrences that are not  
the result of defective workmanship or materials in this appliance.  
OCCURRENCE  
SOLUTION  
Wall plug disconnected. Push plug firmly into wall outlet.  
Air conditioner will not operate.  
Plug Current Device Tripped. Press the RESET button.  
House fuse blown or circuit breaker tripped. Replace fuse with time delay type or reset circuit breaker.  
Control is OFF. Turn Control ON and set to desired setting.  
Room temperature below 60°F (16°C). Cooling may not occur until room temperature rises above  
60°F (16°C).  
Air from unit does not feel cold  
enough.  
Temperature sensing element touching cold coil, located behind air filter. Straighten away from coil.  
Reset to a lower temperature.  
Compressor shut-off by changing modes. Wait approximately 3 minutes and listen for compressor to  
restart when set in the COOL mode.  
Outdoor temperature below 60 O F (16 OC). To defrost the coil, set FAN ONLY mode.  
Air conditioner cooling, but room  
is too warm - ice forming  
on cooling coil behind decorative  
front  
Air filter may be dirty. Clean filter. Refer to Care and Cleaning section. To defrost, set to FAN ONLY  
mode.  
Temperature is set too low for night-time cooling. To defrost the coil, set to FAN ONLY mode. Then,  
set temperature to a higher setting.  
Dirty air filter - air restricted. Clean air filter. Refer to Care and Cleaning section.  
Temperature is set too high. Set temperature to a lower setting.  
Air conditioner cooling, but room  
is too warm - NO ice forming on  
cooling coil behind decorative  
front.  
Air directional louvers positioned improperly. Position louvers for better air distribution.  
Front of unit is blocked by drapes, blinds, furniture, etc. - restricts air distribution. Clear blockage in  
front of unit.  
Doors, windows, registers, etc. open - cool air escapes. Close doors, windows, registers, etc.  
Unit recently turned on in hot room. Allow additional time to remove “stored heat” from walls, ceiling,  
floor and furniture.  
Dirty air filter - air restricted. Clean air filter.  
Air conditioner turns on and off  
rapidly.  
Outside temperature extremely hot. Set FAN speed to a faster setting to bring air through cooling coils  
more frequently.  
Air movement sound. This is normal. If too loud, set to lower FAN setting.  
Noise when unit is cooling.  
Window vibration - poor installation. Refer to installation instructions or check with installer.  
Improper installation. Tilt air conditioner slightly to the outside to allow water drainage. Refer to  
installation instructions or check with installer.  
Water dripping INSIDE when  
unit is cooling.  
Water dripping OUTSIDE when  
unit is cooling.  
Unit removing large quantity of moisture from humid room. This is normal during excessively humid  
days.  
Set temperature too low. lncrease set temperature.  
Room too cold.  
If These Solutions Fail, Call 1-800-944-9044 For Frigidaire Service.  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Major Appliance Warranty  
Your appliance is covered by a full one-year warranty and a limited 2-5 year warranty(sealed system). For one year from your  
original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this appliance that prove to be  
defective in materials or workmanship when such appliance is installed, used and maintained in accordance with the provided  
instructions. From the second to the fifth year from your original purchase date, Electrolux will repair or replace any parts in the  
Sealed Refrigeration System (compressor, condenser, evaporator and tubing) proves to be defective in materials or workmanship.  
The consumer will be responsible for diagnostic costs and any removal, transportation and reinstallation costs which are required  
because of service, costs for labor, parts and transportation other than with respect to the Sealed Refrigeration System.  
Exclusions  
This warranty does not cover the following:  
1. Products with original serial numbers that have been removed, altered or cannot be readily determined.  
2. Product that has been transferred from its original owner to another party or removed outside the USA or  
Canada.  
3. Rust on the interior or exterior of the unit.  
4. Products purchased "as-is" are not covered by this warranty.  
5. Food loss due to any refrigerator or freezer failures.  
6. Products used in a commercial setting.  
7. Service calls which do not involve malfunction or defects in materials or workmanship, or for appliances not  
in ordinary household use or used other than in accordance with the provided instructions.  
8. Service calls to correct the installation of your appliance or to instruct you how to use your appliance.  
9. Expenses for making the appliance accessible for servicing, such as removal of trim, cupboards, shelves,  
etc., which are not a part of the appliance when it is shipped from the factory.  
10. Service calls to repair or replace appliance light bulbs, air filters, water filters, other consumables, or knobs,  
handles, or other cosmetic parts.  
11. Surcharges including, but not limited to, any after hour, weekend, or holiday service calls, tolls, ferry trip  
charges, or mileage expense for service calls to remote areas, including the state of Alaska.  
12. Damages to the finish of appliance or home incurred during installation, including but not limited to floors,  
cabinets, walls, etc.  
13. Damages caused by: services performed by unauthorized service companies; use of parts other than  
genuine Electrolux parts or parts obtained from persons other than authorized service companies; or external  
causes such as abuse, misuse, inadequate power supply, accidents, fires, or acts of God.  
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES  
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR  
REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST  
PERIOD ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. ELECTROLUX SHALL NOT BE LIABLE FOR  
CONSEQUENTIAL OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES  
RESULTING FROM ANY BREACH OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME  
STATES AND PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE-  
QUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION OF IMPLIED WARRANTIES, SO THESE LIMITATIONS  
OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.  
YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.  
If You Need Keep your receipt, delivery slip, or some other appropriate payment record to establish the warranty period  
Service  
should service be required. If service is performed, it is in your best interest to obtain and keep all receipts.  
Service under this warranty must be obtained by contacting Electrolux at the addresses or phone  
numbers below.  
This warranty only applies in the USA and Canada. In the USA, your appliance is warranted by Electrolux Major Appliances North  
America, a division of Electrolux Home Products, Inc. In Canada, your appliance is warranted by Electrolux Canada Corp.  
Electrolux authorizes no person to change or add to any obligations under this warranty. Obligations for service and parts under  
this warranty must be performed by Electrolux or an authorized service company. Product features or specifications as described  
or illustrated are subject to change without notice.  
USA  
Canada  
1.800.944.9044  
Electrolux Major Appliances  
North America  
1.800.265.8352  
Electrolux Canada Corp.  
5855 Terry Fox Way  
P.O. Box 212378  
Augusta, GA 30907  
Mississauga, Ontario, Canada  
L5V 3E4  
2009 Electrolux Home Products, Inc.  
All rights reserved.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Edelbrock Automobile Parts Big Block Chevy User Manual
Eizo Computer Monitor FlexScan L885 User Manual
Fisher Price Baby Toy W1443 User Manual
Flymo Trimmer 511967501 User Manual
Frigidaire Dishwasher FGBD2432K User Manual
Frigidaire Refrigerator FFSC2323LE User Manual
Frigidaire Refrigerator FFSC2323L User Manual
Fujitsu Printer FTP 621MCL201 User Manual
GE Double Oven JHC56G User Manual
Gianni Industries Door L GL600 AL User Manual