®
®
Features of Your FoodSaver Appliance
Care and Cleaning
Features of Your FoodSaver Appliance
To Clean Appliance:
9
Open appliance door (D), while holding the appliance with two hands, press two Release Buttons (K) with your
thumbs, rotate appliance away from you, and allow appliance to rest on the counter. After cleaning, hold appliance
with two hands and rotate upright until the latches lock.
Seal
Button
2
Indicator
LEDs
Tray Full
Indicator
PulseVac™
LED*
10
Quick Start Guide
Vacuum
Progress
Display
Check Foam Gasket (M) around Drip Tray (O) and Upper Gasket (Q) which surrounds the Upper Bag Detection Tray (P)
to make sure they are free from food materials and the lower Foam Gasket is properly inserted into gasket channel.
H. Built-in Roll Holder
For storage of FoodSaver®
Vacuum Sealing Rolls.
V3860
& User Manual
For important product maintenance information and helpful tips, please refer to the FoodSaver® Reference Guide
included in your kit.
for V3800 series appliances
Canister Speed
Mode Settings
Marinate
Mode
Adjustable
Food Settings Button
Cancel
PulseVac™
Power Button
I. Roll Cutter
Simplifies making
custom-sized bags.
Button* Seal Indicator
1
11
3
4
5
6
7
8
Antibacterial Drip Tray & Upper Bag Detection Tray
Empty Drip Tray after each use (See Fig. 7). Wash in warm soapy water or place in top rack of dishwasher. The Food
Sensors in the Drip Tray (O) will not function correctly if liquid is allowed to remain in Drip Tray.
you will have the opportunity to receive special bag and accessory introductory offers. Refer to the registration card
in the box.
For more usage tips and safety information, please refer to the FoodSaver® Reference Guide or visit our website at
1
POWER BUTTON:
The Moist Food Indicator light will flash when Food
Sealing Sensors automatically detect any moisture or
liquid in the drip tray (O). Note: Appliance will default
to Dry setting upon pressing the Power Button or when
power has been interrupted, unless liquid is detected
in the Drip Tray. (See Care and Cleaning section of this
Quick Start Guide).
J. Auto Bag Sensing
Press the power button to begin. The Power Indicator,
Speed Indicator and Food Indicator lights will become
illuminated. After Vacuum Sealing, press Power Button
to turn appliance Off. Note: After 12 minutes, the
appliance will turn Off automatically.
Simply insert open end of bag
into the vacuum channel and the
machine will sense and grasp the
bag, vacuum, seal and shut-off
automatically.
This appliance has a Tray Full indicator 2 . When excess liquid fills the Drip Tray, the unit will turn off and the Tray
Full Indicator light will activate. To resume normal operation, open Appliance Door (D), press two release buttons
(K), rotate appliance away from you, and allow appliance to rest on the counter. Remove the Drip Tray, empty
liquid, clean Drip Tray and replace in housing. When replacing drip tray, set the right end of the drip tray into place,
then firmly snap the left side down (See Fig. 8). Appliance can be used without Drip Tray, however the Adjustable
Food Sensor setting 6 will not function without the Drip Tray.
®
Features of Your FoodSaver Appliance
2
TRAY FULL INDICATOR LIGHT:
7
During the vacuum sealing process, small amounts of
liquids, crumbs or food particles can be inadvertently
pulled into the Drip Tray (O). When excess liquid fills
the Drip Tray, the unit will turn off and the Tray Full
Indicator 2 will activate. To resume normal operation,
remove the Drip Tray, empty liquid, wash in warm
soapy water or place in top rack of dishwasher. Dry and
replace Drip Tray in trough. (See Care and Cleaning)
CANCEL BUTTON
Immediately halts the current function opening the
Vacuum Channel.
K. Release Buttons
To open appliance
for cleaning.
A. Controls and Indicator Lights
To indicate current setting, vacuum
progress and for added control.
Firmly Snap in Place
Remove For Cleaning
8
9
PAUSE OR PulseVac™ CONTROL BUTTON
(*not available on all models)
Use to manually control the vacuum process and
avoid crushing delicate items. See tips section for
further information.
L. Appliance Door
Opens to access Built-in
Roll Holder and Cutter.
B. Vacuum Progress Display
Blue lights signal progression of
vacuuming and sealing process.
All lights extinguish when the full
process is finished.
3
4
5
MARINATE MODE BUTTON
SEAL BUTTON
A ten minute predetermined sequence of vacuum pulse
to rest ratio allowing foods to get optimum flavor
infusion in the least amount of time. See “Marinating
with your FoodSaver®” section on page 5.
CrushFree™ Instant Seal feature-
This button has four uses:
Fig. 8
Fig. 7
C. Seal Button
1. Press to immediately stop the vacuum process
and begin sealing the bag. This prevents crushing
delicate items such as bread, cookies and pastries.
CrushFree™ Instant Seal feature.
Prevents crushing delicate items.
Clean Upper Bag Detection Tray after each use. The Upper Bag Detection Tray (P) is removable for cleaning, remove
by lifting the tabs on each end. Do not pull on the Upper Bag Detection Flags to remove the Upper Bag Detection
Tray. Clean Upper Bag Detection Tray by washing in warm soapy water or placing in top rack of dishwasher. Upper
Bag Detection Tray MUST be inserted to use the appliance. Without the Upper Bag Detection Tray, your FoodSaver®
Appliance will not detect bag when inserted in the Vacuum Channel (E).
M. Foam Gasket
CANISTER MODE BUTTON
Press to achieve best vacuum for canisters and
accessories. Push Canister Vacuum Button 4 to begin
vacuum process. Motor will run until Vacuum Sealing
Process is complete.
N. Extra-wide Sealing Strip with
Non-stick Coating
Provides extra secure, airtight
seal that’s two times wider.
D. Appliance Door
Opens to access Built-in Roll Holder
and Cutter.
2. Press to create a seal when making bags from a
FoodSaver® Roll.
3. Press to create a seal on Mylar bags (such as a
potato chip bag) to keep food sealed airtight.
E. Vacuum Channel
SPEED SETTINGS BUTTON
Simply insert bag and the FoodSaver®
appliance does the rest.
When vacuum sealing delicate items, press Speed
Setting Button 5 so that the gentle speed indicator
light is illuminated. For more control you may press
Seal Button 9 at any time to stop vacuum and begin
automatic sealing process. Note: Appliance will default
to Normal speed upon pressing the Power On Button or
when power has been interrupted.
O. Drip Tray
™
4. Press during PulseVac mode to seal bag.
Catches overflow liquids
and contains Food Sensors
to detect liquid.
For important safety information and helpful tips, please refer to
F. Retractable Accessory Hose/
Accessory Port
®
10 VACUUM PROGRESS DISPLAY
Displays vacuum levels as the bag/canister is
evacuated.
the FoodSaver Reference Guide included in your kit.
Accessory hose can be used with all
®
order FoodSaver brand accessories, bags and rolls, or call 1-877-777-8042 (U.S.).
FoodSaver® Brand Accessories.
P. Upper Bag Detection Tray
Q. Upper Gasket
11
SEAL INDICATOR LIGHT
G. Integrated Bag Opener
Quick and convenient, opens sealed
bags with ease.
6
ADJUSTABLE FOOD SETTINGS BUTTON
Constant Red light indicates sealing process is
engaged. (Flashing light indicates error)
For optimal vacuuming and sealing of moist or juicy
foods, press the Adjustable Food Setting Button 6
until the Moist Indicator Light is illuminated. Choose the
dry food setting for foods without liquid.
©2008 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions.
All rights reserved. Distributed by Sunbeam Products, Inc. doing business as Jarden
R. Rubber Seal Profile
Consumer Solutions, Boca Raton, Florida 33431.
P.N.128164
T180-00455
Printed in China.
3
2
FSV3800.indd 5-2
5/27/08 4:58:00 PM
Download from Www.Somanuals.com. All Manuals Search And Download.
|