Please read this manual and
save it with your original
sales receipt.
Tool needed for assembly:
Phillips screwdriver
(not included).
Use only with a Power Wheels®
6 Volt (4.0 Amp/Hr.)
Rechargeable Battery with
Built-in Thermal Fuse and
a Power Wheels® 6 Volt
(4.0 Amp/Hr.) Charger
(both included).
Product ffeaturres maayy vary
from thhe picctture abbove.
Owner's MManual
with Asssembly IInstruucctions
For Modell P5065
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
ELECTRICAL HAZARD
DANGER
• To prevent electric shock, do not immerse in water; wipe clean with a damp cloth.
WARNING
• Battery can fall out and injure a child if vehicle tips over. Always use battery retainer.
• PREVENT FIRE
- Never modify the electrical system. Alterations could cause a fire resulting in serious injury
and could also ruin the electrical system.
- Use of the wrong type battery or charger could cause a fire or explosion resulting in
serious injury.
- Use of Power Wheels® components in products other than Power Wheels® vehicles could
cause overheating, fire or explosion.
• The battery must be handled by adults only. The battery is heavy and contains sulfuric acid
(electrolyte). Dropping the battery could result in serious injury.
• Never allow children to charge the battery. Battery charging must be done by adults only.
A child could be injured by the electricity involved in charging the battery.
• Never lift or carry the battery by the wires or connector. This can damage the battery and
possibly cause a fire resulting in serious injury. Lift and carry the battery by the case only.
• Read the safety instructions on the battery.
• Examine the battery, charger and their connectors for excessive wear or damage each time
you charge the battery. If damage or excessive wear is detected, do not use the charger or
the battery until you have replaced the worn or damaged part.
• HOT motors. Handle carefully.
RIDING HAZARD
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- Away from swimming pools and other bodies of water to prevent drownings
- Generally level to prevent tipovers
- Away from steps, cars, steep inclines, roads and alleys.
• Riding Rules
Make sure children know and follow these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
P5065a-0920
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS
• If you experience a problem with this product, or are missing a part, please call us at 1-800-348-0751, rather than return this
product to the store.
• Please identify all parts before assembly and save all packaging material until assembly is complete to ensure that no parts
are discarded.
• Metal parts have been coated with a lubricant to protect them during shipment. Wipe all metal parts with a paper towel to remove
any excess lubricant.
Vehicle Frame
6 Volt Battery Charger
6 Volt Battery
Not Shown: Label Sheet
Handlebar
Front Wheel Assembly
#8 x ¾" Screw – 10
Headlight
Handlebar Bracket
Fastener Shown Actual Size
Note: Tighten and loosen all screws with a Phillips
screwdriver. Do not over-tighten the screws.
2 Headlight Retainers
P5065a-0920
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS PICTURE
3
7
5
6
4
10
8
2
1
9
Parts Not Shown
Label Sheet
#8 x ¾" Screw – 10
1
2
3
4
Vehicle Frame
Front Wheel Assembly
Handlebar
5
6
7
8
Headlight
Headlight Retainer – 2
Seat
9
6 Volt Battery Charger
10 Battery Retainer
Handlebar Bracket
6 Volt Battery
P5065a-0920
5
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGING
ELECTRICAL HAZARD
CAUTION
WARNING
Use the charger in dry locations only.
• Battery can fall out and injure a child
if vehicle tips over. Always use
battery retainer.
About Thermal Fuses
Your Power Wheels® 6 Volt (4.0 Amp/Hr.) battery is equipped
with a built-in thermal fuse. The thermal fuse is a self-resetting
safety device which automatically “trips" and shuts down operation
of the vehicle if the vehicle is overloaded or the driving
conditions too severe. Once a fuse has “tripped", remove your
foot from the pedal and wait approximately 25 seconds before
operating the vehicle again. To avoid repeated automatic shut-
downs, do not overload the vehicle by exceeding the 50 lb.
(23 kg) maximum weight capacity or by towing anything behind
the vehicle. Avoid severe driving conditions, such as driving
up slopes or running into fixed objects, which can cause the
wheels to stop spinning while power is still being supplied to
the motors and make sure your child stops the vehicle before
switching direction.
• PREVENT FIRE
- Never modify the electrical system.
Alterations could cause a fire resulting
in serious injury and could also ruin
the electrical system.
- Use of the wrong type battery or charger
could cause a fire or explosion resulting
in serious injury.
- Use of Power Wheels® components
in products other than Power Wheels®
vehicles could cause overheating,
fire or explosion.
If a thermal fuse in a battery continually trips under normal
driving conditions, please contact your local Power Wheels®
Authorized Service Center. For the location of the Authorized
Service Center nearest to you, visit us on-line at
• The battery must be handled by adults
only. The battery is heavy and contains
sulfuric acid (electrolyte). Dropping the
battery could result in serious injury.
Important Notes
• Never allow children to charge the battery.
Battery charging must be done by adults
only. A child could be injured by the
• Your new battery must be charged for at least 18 hours
before you use it in your vehicle for the first time.
• We recommend that you start charging your battery before
beginning assembly of your new vehicle.
• The battery must be upright while charging.
• The charger is not a toy.
• Do not short circuit the battery.
• You do not need to remove the battery from your vehicle to
recharge it.
electricity involved in charging the battery.
• Never lift or carry the battery by the wires
or connector. This can damage the battery
and possibly cause a fire resulting in
serious injury. Lift and carry the battery
by the case only.
• Read the safety instructions on the battery.
• Before charging the battery, examine the battery case for
cracks and other damage which may cause sulfuric acid
(electrolyte) to leak during the charging process. If damage
is detected, do not charge the battery or use it in your vehicle.
Battery acid is very corrosive and can cause severe damage
to surfaces it contacts.
• Do not charge the battery on a surface (such as a kitchen
counter top) which could be damaged by the acid contained
inside the battery. Take precautions to protect the surface on
which you charge your battery.
• Use only a Power Wheels® 6 volt (4.0 Amp/Hr.) charger with
an input of 120VAC, 60Hz, and an output of 6VDC to charge
your Power Wheels® rechargeable 6 volt (4.0 Amp/Hr.) battery.
• Examine the battery, charger and their
connectors for excessive wear or damage
each time you charge the battery. If damage
or excessive wear is detected, do not use
the charger or the battery until you have
replaced the worn or damaged part.
Adults Note: Regularly examine the charger for damage to the
cord, plug, housing or other parts that may result in the risk of
fire, electric shock or injury. In the event of any damage, do not
use the charger until the damage has been properly repaired.
Please call 1-800-348-0751.
• If your battery is old and will not accept a charge, do not leave
it in the vehicle. Always remove a dead battery from the vehicle.
P5065a-0920
6
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CHARGING
Seat
B
Battery
Connector
A
1
Charger
Connector
• Loosen the screws on each side of the seat. Set the
screws aside.
• Pull the tabs on each side of the seat and lift to remove it.
A
• Fit the charger connector and the battery connector together
.
B
• Plug the charger into a standard wall outlet
.
Battery Retainer
Notes:
– If power flow to the wall outlet is controlled by a switch,
make sure the switch is ON.
– Use the charger only in a wall outlet. Do not plug the charger
into a ceiling outlet.
• Before first time use, charge the battery for at least 18 hours.
Never charge the battery longer than 30 hours.
• Recharge the battery after each use of your vehicle for at least
14 hours. Do not charge the battery longer than 30 hours.
• Once the battery is charged, disconnect the charger connector
from the battery connector. Unplug the charger from the
wall outlet. The battery is now ready to be installed in your
vehicle. If your battery is already installed in your vehicle, simply
re-connect the battery connector and motor connector. Replace
the battery retainer and the seat.
2
• Loosen the screw in the battery retainer and remove it. Set the
screw aside.
• Remove the battery from the battery compartment.
P5065a-0920
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Handlebar
WARNING
Children can be harmed by small parts,
sharp edges and sharp points in the
vehicle's unassembled state, or by electrical
items. Care should be taken in unpacking
and assembly of the vehicle. Children should
not handle parts, including the battery,
or help in assembly of the vehicle.
Top of Front
Wheel Assembly
Vehicle Frame
Flat Side of Front
Wheel Assembly
2
• Fit the handlebar onto the top of the front wheel assembly,
as shown.
Note: If the handlebar does not seem to fit, the front wheel
assembly may be backwards. Turn the front wheel assembly
around and and try again!
Handlebar
Bracket
1
• Lift the front end of vehicle frame.
• Position the front wheel assembly with the flat side toward the
front of the vehicle.
• Slide the front wheel assembly up through the opening in the
front of the frame.
3
• With the ribbed side down, fit the handlebar bracket onto the
back of the front wheel assembly and handlebar, as shown.
P5065a-0920
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
4
6
• Insert two screws into the outer holes in the handlebar bracket
and tighten.
• Insert four screws into the headlight and tighten.
Hint: You may need to turn the handlebar to each side to insert
and tighten the screws.
Headlight
5
• Fit the headlight onto the front end of the assembly.
P5065a-0920
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY
Headlight
Retainer
8
7
• Fit a headlight retainer to the back of the headlight, as shown.
• Insert two screws into the headlight retainer and tighten.
• Repeat this procedure to assemble the other headlight retainer.
P5065a-0920
10
Download from Www.Somanuals.com. All Manuals Search And Download.
DECORATION
Proper label application will help to keep the labels looking their best! When applying labels, keep the following guidelines
in mind:
• Wash your hands before applying the labels.
• Before applying the labels, wipe the surface of the vehicle with a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations.
• For best results, avoid repositioning a label once it has been applied to the vehicle.
• After applying a label, rub the label firmly with a clean, dry cloth to make sure the label is adhered to your vehicle. Start at the
center of a label, and smooth towards the outer edges to remove air bubbles.
8
3
4
5
2
1
11
9
FRONT VIEW
TOP VIEW
6
6
10
10
7
LEFT SIDE
RIGHT SIDE
P5065a-0920
11
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY INSTALLATION
IMPORTANT! Use only a Power Wheels® 6 volt lead-acid
Battery Retainer
rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least
18 hours using the enclosed Power Wheels® 6 volt charger before
operating your vehicle for the first time. Charge the battery for
at least 14 hours after each use of the vehicle. Never charge the
battery longer than 30 hours. Failure to follow these instructions
may damage your battery and will void your warranty.
6 Volt Battery
2
• Replace the battery retainer in the battery compartment.
• Insert the screw into the hole in the battery retainer and tighten.
Seat
Motor Harness Connector
3
• Fit the tabs on the front of the seat into the slots in the vehicle.
• Push down on the seat to “snap" in place.
1
CORRECT
INCORRECT
• Plug the motor harness connector into the battery connector.
Push firmly.
• Place the battery upright in the battery compartment.
4
• Replace the screw in the holes on each side of the seat
and tighten.
P5065a-0920
12
Download from Www.Somanuals.com. All Manuals Search And Download.
BATTERY CARE AND DISPOSAL
Care
Disposal
If a battery leak develops, avoid contact with the leaking acid
and place the damaged battery in a plastic bag. See information
below for proper disposal.
• Your Power Wheels® battery is a non-spillable, sealed lead-acid
battery. It must be recycled or disposed of in an environmentally
sound manner.
If acid comes in contact with skin or eyes, flush with cool
water for at least 15 minutes and call a physician.
• Do not dispose of a lead-acid battery in a fire. The battery may
explode or leak.
• Do not dispose of a lead-acid battery in your regular,
household trash. The incineration, landfilling or mixing of
sealed lead-acid batteries with household trash is prohibited
by law in most areas.
• Protect the environment by not disposing of this product with
household waste (2002/96/EC). Check your local authority for
recycling advice and facilities (Europe only).
• Return an exhausted battery to a federal or state approved
lead-acid battery recycler, such as a Power Wheels® authorized
service center or a local seller of automotive batteries. For the
authorized service center location nearest to you, please visit
Contact your local waste management officials for other
information regarding the environmentally sound collection,
recycling and disposal of lead-acid batteries. If you live in
the State of Florida or the State of Minnesota, it is prohibited
by law for anyone to throw away lead-acid batteries in the
municipal waste stream.
If acid is internally ingested, give water, milk of magnesia or
egg whites immediately. Never give emetics or induce vomiting.
Call a physician.
• Charge a new battery for at least 18 hours before first use.
Never charge the battery longer than 30 hours. Overcharging
or undercharging the battery may shorten battery life and
decrease vehicle running time.
• After the first charge, recharge the battery for at least 14 hours
after each use. Never charge the battery longer than 30 hours.
Charge the battery after each use, regardless of how long the
vehicle was used.
• The battery must be upright while charging.
• Do not allow the battery to run down completely before charging.
• Charge the battery before storing the vehicle.
• Charge the battery at least once per month, even if the vehicle
has not been used.
• Leaving the battery in a discharged condition will ruin it.
• Always remove an exhausted battery from the vehicle.
Battery leakage and corrosion can damage the vehicle.
• Do not store the battery on a surface (such as a kitchen
counter top) which could be damaged by the acid contained
inside the battery. Take precautions to protect the surface on
which you store the battery.
• Do not store the battery in temperatures above 75° F or
below -10° F.
• Use only a Power Wheels® 6 Volt (4.0 Amp/Hr.) battery.
Remember to charge the new battery for at least 18 hours
before first use.
• Prevent the battery from moving freely inside the battery
compartment. Always use the battery retainer to secure
the battery in the battery compartment.
• Examine the battery, charger and their connectors for
excessive wear or damage each time you charge the battery.
If damage is detected, do not use the charger or the battery
until you have replaced the worn or damaged part.
P5065a-0920
13
Download from Www.Somanuals.com. All Manuals Search And Download.
SAFE DRIVING RULES
Teach Safety Rules to Children
RIDING HAZARD
While children can quickly develop the skill necessary to drive
this vehicle, it is important to remember that their judgment
skills are still very immature. Unsupervised driving by children
can lead to serious injury. Before children use this vehicle,
an adult should carefully evaluate the driving area as well as
the children’s skill level and ability to drive this vehicle safely.
Children are not always able to recognize or anticipate hazards,
even when they have been taught about them. There is no
acceptable substitute for direct adult supervision.
WARNING
• Prevent Injuries and Deaths
• Direct Adult Supervision Required
• Never Ride at Night.
• Keep Children Within Safe Riding Areas.
These areas must be:
- Away from swimming pools and other
bodies of water to prevent drownings
Teach appropriate safety rules to your child before allowing
operation of this vehicle. These rules should also be reviewed
with neighborhood children or other playmates who want to
drive this vehicle.
- Generally level to prevent tipovers
- Away from steps, cars, steep inclines,
roads and alleys.
Riding Rules
Make sure children know and follow these rules for safe driving:
1. Always sit on the seat.
• Riding Rules
2. Always wear shoes.
Make sure children know and follow
these rules for safe driving and riding.
- Always sit on the seat.
- Always wear shoes.
- Only 1 (one) rider at a time.
3. Only 1 (one) rider at a time. A child who is not sitting on
the seat or who is standing on the vehicle could fall off,
cause a tip-over or block the driver’s view. A child could
be seriously injured.
4. Do not allow any child to drive the vehicle in the street or near
moving (motorized) vehicles.
5. Do not allow any child to drive near bodies of water (such as
pools or creeks), obstructions (such as furniture, low tree limbs
or play equipment), or drop-offs (such as stairs or decks).
6. Do not allow any child to drive the vehicle in the dark. A child
could encounter unexpected obstacles and have an accident.
Operate the vehicle only in the daytime or a well-lit area.
7. Do not allow your child to drive on sloped or inclined
surfaces. Restrict your child’s driving to generally level
ground ONLY!
8. Do not allow your child to drive down or across a steep slope.
- The vehicle may gain unsafe speed, even if the pedal is
released to stop.
- The vehicle may tilt and tip over.
Use vehicle on generally level ground ONLY!
- The wheels could lose traction, causing the vehicle to slip.
9. Do not allow your child to drive up steep inclines. The motor
may stop and the vehicle could roll backwards at
an unsafe speed.
10. Never put anything near any moving parts. Rotating parts
such as motors, gear boxes and wheels can snag fingers,
hair, etc., causing serious injury. Do not allow operation of the
vehicle when it is on its side or in an upside-down position.
11. Do not operate the vehicle near flammable vapors (gasoline,
paint thinner, acetone, liquid wax, etc.). The vehicle’s electrical
switches, like most electrical switches, emit an internal spark
when first turned on or turned off. The presence of flammable
liquids or vapors could cause an explosion or a fire. Keep all
flammable products in tightly sealed containers and away
from the vehicle.
12. Do not allow a child to operate the vehicle without direct
adult supervision. To prevent unsupervised use of the vehicle,
disconnect the motor connector from the battery connector
when the vehicle is not in use.
P5065a-0920
14
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE OPERATION
IMPORTANT! Use this vehicle ONLY outdoors. Most interior
flooring can be damaged by riding this vehicle indoors.
®
Fisher-Price will not be responsible for damage to the floor
if the vehicle is used indoors.
• Your vehicle has a patented, electronic braking system that
automatically stops the vehicle when your child’s foot lifts from
the pedal.
Drive Buttons
• Make sure your child is comfortable with steering the vehicle
and automatically knows how to stop.
• Press a DRIVE button on the tank.
• Press the foot pedal. The vehicle goes forward or in reverse at a
maximum of 2½ mph.
• Help your child practice steering to learn how far and how
quickly to turn the handlebar when driving.
IMPORTANT! To prevent damaging the motors and gears, teach
your child to stop the vehicle before switching direction.
P5065a-0920
15
Download from Www.Somanuals.com. All Manuals Search And Download.
VEHICLE CARE
BUMPER-TO-BUMPER*
LIMITED WARRANTY
• Check all screws, cap nuts and their protective coverings
regularly and tighten as required. Check plastic parts on
a regular basis for cracks or broken pieces.
• During snowy or rainy weather, the vehicle should be stored
inside or under a protective cover. Remember to charge the
battery at least once per month while your vehicle is not in
regular use.
*One year limited warranty from the date of
purchase on the Power Wheels® vehicle.
Six month limited warranty on the 6 volt battery.
• Avoid operating the vehicle in wet or snowy conditions, and do
not spray the vehicle with a hose. Do not wash the vehicle with
soap and water. Water or moisture in the motors or electrical
switches can cause them to corrode, and could cause switch
or motor failure.
• Avoid operating the vehicle on sand, loose dirt or gravel.
Sand, loose dirt or gravel in the motors or electrical switches
can cause them to jam, and could cause switch or motor failure.
• The vehicle can be wiped down with a soft, dry cloth.
For a shiny finish, you can wipe plastic parts with a non-wax
furniture polish applied to a soft-cloth. Do not use automotive
wax. Do not use soap and water or spray the vehicle with a hose.
• To ensure that your vehicle stays in good operating order,
we recommend that you periodically have your vehicle checked
by a Power Wheels® authorized service center. For the location
of the authorized service center nearest you, please visit us
For the original purchaser, this one year limited warranty
covers the Power Wheels® ride-on vehicle (purchased
from Power Wheels®) against defects in materials and
workmanship. The six month limited warranty applies
only to the 6 volt battery included by
Power Wheels® with the original purchase of the vehicle.
This warranty covers normal use and does not cover
the Power Wheels® vehicle or battery if damaged by
unreasonable use, neglect, accident, abuse, misuse,
improper service or other causes not arising out of defects
in materials or workmanship. Evidence of any attempt at
consumer repair will void this warranty. THIS WARRANTY
DOES NOT COVER, AND IS INTENDED TO EXCLUDE, ANY
LIABILITY ON THE PART OF POWER WHEELS®, WHETHER
UNDER THIS WARRANTY OR IMPLIED BY LAW FOR ANY
INDIRECT OR CONSEQUENTIAL DAMAGES FOR BREACH
OF WARRANTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION SO THIS LIMITATION MAY
NOT APPLY TO YOU.
Should you need service or assistance with your vehicle
during the warranty period, do not return the vehicle to the
store. Power Wheels® has provided a nationwide network
of authorized service centers. If there is not an authorized
service center in your area, please visit us on-line at
www.powerwheels.com or call Consumer Relations for
information, 1-800-348-0751.
This warranty gives you specific legal rights, and you may
also have other rights which may vary from state to state.
PLEASE SAVE YOUR ORIGINAL SALES RECEIPT.
P5065a-0920
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
IMPORTANT! If you experience a problem with your vehicle, first check the Problems and Solutions Guide below. If you still
experience a problem, please contact Power Wheels® Consumer Relations, toll-free at 1-800-348-0751. Or, contact your local
Power Wheels® authorized service center.
For the location nearest you, please visit us on-line at www.powerwheels.com, or call 1-800-348-0751.
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle does not run
Undercharged battery
Charge the battery. A new battery should have been charged for
at least 18 hours before using the vehicle for the first time.
After first-time use, recharge the battery for at least 14 hours
after each use. Never charge the battery longer than 30 hours.
Check all connectors. Make sure the charger connector is plugged
into the battery connector, and that the charger is plugged into
the wall.
Make sure power flow to the wall outlet is “ON".
Charger is not working
Tripped thermal fuse
There is no sure way to tell if your charger is working unless you
have a volt meter. If you suspect there is a problem with your
charger, contact your local Power Wheels® authorized service
center. They can test your charger for you.
Each Power Wheels® 6 Volt (4.0 Amp/Hr.) battery has a built-in
thermal fuse. A thermal fuse may “trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving conditions
too severe. Once a fuse has “tripped", release the pedal and wait
25 seconds before operating the vehicle again. To avoid repeated
automatic shutdowns, do not overload the vehicle by exceeding
the 50 lb. (23 kg) maximum weight capacity or by towing anything
behind the vehicle. Do not drive up hills or run into fixed objects,
which can cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually trips,
contact your local Power Wheels® authorized service center.
Loose wire or loose connectors
Dead battery
Check all wires and connectors. Make sure the motor harness
connector is plugged into the battery connector, and that there
are no loose wires around the motors.
If your battery is old or if you have not followed Battery Care
instructions, your battery may be dead. If you are unsure whether
or not the battery is dead, you can have it tested at your local
Power Wheels® authorized service center.
Electrical switch damage
Motor damage
The electrical switches can become corroded due to exposure
to water or moisture, or can jam due to loose dirt, sand or gravel.
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
P5065a-0920
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle was running but
suddenly stopped
Loose wire or loose connectors
Check all wires and connectors. Make sure the motor harness
connector is plugged into the battery connector, and that there
are no loose wires around the motors.
Tripped thermal fuse
Each Power Wheels® 6 Volt (4.0 Amp/Hr.) battery has a built-in
thermal fuse. A thermal fuse may “trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving conditions
too severe. Once a fuse has “tripped", release the pedal and wait
25 seconds before operating the vehicle again. To avoid repeated
automatic shutdowns, do not overload the vehicle by exceeding
the 50 lb. (23 kg) maximum weight capacity or by towing anything
behind the vehicle. Do not drive up hills or run into fixed objects,
which can cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually trips,
contact your local Power Wheels® authorized service center
Vehicle is overloaded
Make sure you do not overload the vehicle by allowing more than
one rider at one time, by exceeding the 50 lb. (23 kg) maximum
weight capacity, or by towing objects behind the vehicle.
Driving conditions are too stressful
Undercharged battery
Use only on generally level ground.
Short run time (Less than
1 - 3 hours per charge)
Charge the battery. A new battery should have been charged for
at least 18 hours before using the vehicle for the first time.
After first-time use, recharge the battery for at least 14 hours
after each use. Never charge the battery longer than 30 hours.
Check all wires and connectors. Make sure the charger connector
is plugged into the battery connector, and that the charger is
plugged into the wall.
Make sure power flow to the wall outlet is “ON".
Overcharged battery
Do not charge the battery longer than 30 hours. If you suspect that
your battery is damaged as a result of overcharging, contact your
local Power Wheels® authorized service center. They can test your
battery for you.
Battery is old and will not accept
full charge
Even with proper care, a rechargeable battery does not last
forever. Average battery life is 1 to 3 years depending on vehicle
use and use conditions. Replace only with a Power Wheels®
6 Volt (4.0 Amp/Hr.) battery with a built-in thermal fuse. Do not
substitute parts.
Tripped thermal fuse
Each Power Wheels® 6 Volt (4.0 Amp/Hr.) battery has a built-in
thermal fuse. A thermal fuse may “trip" and shut down operation
of the vehicle if the vehicle is overloaded or the driving conditions
too severe. Once a fuse has “tripped", release the pedal and wait
25 seconds before operating the vehicle again. To avoid repeated
automatic shutdowns, do not overload the vehicle by exceeding
the 50 lb. (23 kg) maximum weight capacity or by towing anything
behind the vehicle. Do not drive up hills or run into fixed objects,
which can cause the wheels to stop spinning while power is still
being supplied to the motors. If a thermal fuse continually trips,
contact your local Power Wheels® authorized service center.
P5065a-0920
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PROBLEMS AND SOLUTIONS GUIDE
PROBLEM
POSSIBLE CAUSE
SOLUTION
Vehicle runs sluggishly
Undercharged battery
Charge the battery. A new battery should have been charged for
at least 18 hours before using the vehicle for the first time.
After first-time use, recharge the battery for at least 14 hours after
each use. Never charge the battery longer than 30 hours.
Check all connectors. Make sure the charger connector is plugged
into the battery, and that the charger is plugged into the wall.
Make sure power flow to the wall outlet is “ON".
Be sure to charge the battery after each use.
Battery needs charging
Battery is old and will not accept
full charge
Even with proper care, a rechargeable battery does not last
forever. Average battery life is 1 to 3 years depending on vehicle
use and use conditions. Replace only with a Power Wheels®
6 Volt (4.0 Amp/Hr.) battery with a built-in thermal fuse. Do not
substitute parts.
Vehicle is overloaded
Make sure you do not overload the vehicle by allowing more than
one rider at one time, by exceeding the 50 lb. (23 kg) maximum
weight capacity, or by towing objects behind the vehicle.
Driving conditions are too stressful
Loose wire or connector
Use only on generally level ground.
Sometimes the vehicle doesn’t
run, but other times it does
Check all wires around the motors and all connectors to make sure
they are tight.
Motor or electrical switch damage
Loose wire or connector
“Dead Spot" on motor
Broken gears
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
When the pedal is pressed, the
vehicle won’t run without a push
Check all wires around the motor and all connectors to make sure
they are tight.
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Loud clacking or grinding noise
from a motor-gearbox
Contact your local Power Wheels® authorized service center for
diagnosis and repair.
Charger gets warm during use
It is normal for some chargers to get
warm during use and is not reason for
concern. Some chargers do not get
warm during use.
No action required.
If your charger does not get warm during use, it does not mean
that it is not working properly.
Battery makes a sizzling or
gurgling noise when charging
It is normal for some batteries to make
noise and swell slightly while charging
and is not reason for concern. Some
batteries do not make noise or swell
while charging.
No action required.
P5065a-0920
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Before first-time use,
you must charge the battery
18 hours!
Charge the battery immediately after each use.
Charge the battery once a month, even if the vehicle
is not used or stored.
Do not return
yourvehicle to the store!
We're a toll-free phone call away, and we can help.
If you are missing parts or need assistance, please call:
1-800-348-0751
Or contact your local independently owned and operated
Power Wheels® Authorized Service Center.
© 2009 H-D, All Rights Reserved.
Manufactured by Fisher-Price under license
from Harley-Davidson Motor Company.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052 U.S.A.
©2009 Mattel, Inc. All Rights Reserved.
® and ™ designate U.S. trademarks of Mattel, Inc., unless otherwise indicated.
PRINTED IN MEXICO
P5065a-0920
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Edelbrock Automobile Parts 15002 User Manual
Everpure Water System CGHC 1 Instant User Manual
Fellowes Paper Shredder Electron User Manual
Fender Musical Toy Instrument American Vin User Manual
Fisher Price Baby Toy C6994 User Manual
Futiro Telephone USB Phone User Manual
Gaggenau Range EB 270 User Manual
Gainward TV Receiver TV2GO User Manual
GE Home Security System 60 639 43 EUR User Manual
Gemini Industries Switch UX 160 User Manual