R4743
Newborn
0-3 months
and up to 4,5kg (10 lbs)
Infant
3-6 months
and up to 9kg (20 lbs)
Toddler
6 months+
and up to 11kg (25 lbs)
WARNING
IMPORTANT! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.
Download from Www.Somanuals.com. All Manuals Search And Download.
One-Time Assembly
Temperature Guide
Typical water temperature should be between 32°C and 38°C.
This product has a temperature guide located on the bathtub floor
to help gauge the right water temperature for baby. Use of this
temperature guide should not replace testing the water temperature
with your hand or elbow before placing baby in this product.
Bases
Note: If water temperature is too cold (below 28°C) or too hot
(58°C). no image will appear on the temperature guide.
Water temperature is too cold for baby.
Add warm water.
Bathtub
• Match the number on each base to the number near each
socket on the bathtub. Fit the bases to the bathtub.
• Insert a screw into each base and tighten with a Phillips
screwdriver. Do not over-tighten.
Water temperature is just right for baby.
Water temperature is too hot for baby.
Add cold water.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Great Britain: Vanwall Business Park, Maidenhead SL6 4UB. Helpline: 01628 500303. www.service.mattel.com/uk.
Asia: Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.
Malaysia: Diimport & Diedarkan Oleh: Mattel SEA Ptd Ltd. (993532-P) Lot 13.5, 13th Floor, Menara Lien Hoe, Persiaran Tropicana
Golf Country Resort, 47410 PJ. Tel: +603-3341 9052.
Mattel Europa, B.V., Gondel 1, 1186 MJ Amstelveen, Nederland.
Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, New York 14052, U.S.A.
©2009 Mattel, Inc. All Rights Reserved. ® and ™ designate U.S. trademarks of Mattel, Inc.
PRINTED IN MEXICO
R4743a-0726
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Newborn
Infant
Clips
Clips
Infant Insert
• Fit the clips near the rounded end of the sling to the notch
on each side of the bathtub opposite the plug. Fit the clips
on the other end of the sling to the remaining notches on the
other end of the bathtub.
• Fit the infant insert in the bathtub.
• Fit the bathtub to the sink, or place on a flat surface.
• Fit the bathtub to the sink, or place on a flat surface.
• Fit the plug into the hole in the bottom of the bathtub. Fill
the bathtub with as little water as possible to bathe baby.
ALWAYS test water temperature in the product with your
hand or elbow before placing baby in this product.
Note: This product includes a temperature guide to help gauge
the water temperature (see Temperature Guide section).
• Fit the plug into the hole in the bottom of the bathtub. Fill
the bathtub with as little water as possible to bathe baby.
ALWAYS test water temperature in the product with your
hand or elbow before placing baby in this product.
Note: This product includes a temperature guide to help gauge
the water temperature (see Temperature Guide section).
• Carefully place baby in the bathtub.
• Carefully place baby on the sling.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Toddler
Storage
Infant Insert
Bottom View
• Pull apart the sides of the bathtub and remove the infant insert.
• Before storing, drain, clean, rinse and dry all items.
• Turn the hook on the bathtub to hang it up for storage.
• Place the bathtub in a larger bathtub, or place on a flat surface.
• Fit the plug into the hole in the bottom of the bathtub. Fill
the bathtub with as little water as possible to bathe baby.
ALWAYS test water temperature in the product with your
hand or elbow before placing baby in this product.
Note: This product includes a temperature guide to help gauge
the water temperature (see Temperature Guide section).
• Carefully place baby in the bathtub.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
|